Blame - drivers/leds/Kconfig - SHIFTPHONES/mainline/linux

blob: 275f467956eedf5469661be675fad42a95d16b0d [file] [log] [blame]

Uwe Kleine-König	be5ce2f	2011-06-15 15:08:31 -0700	[diff] [blame]	1	config LEDS_GPIO_REGISTER
				2	bool
				3	help
				4	This option provides the function gpio_led_register_device.
				5	As this function is used by arch code it must not be compiled as a
				6	module.
				7
Jan Engelhardt	66242f7	2007-05-10 10:44:11 +0100	[diff] [blame]	8	menuconfig NEW_LEDS
Richard Purdie	c72a1d6	2006-03-31 02:31:04 -0800	[diff] [blame]	9	bool "LED Support"
				10	help
Richard Purdie	a8d2e7d	2006-05-15 09:44:14 -0700	[diff] [blame]	11	Say Y to enable Linux LED support. This allows control of supported
				12	LEDs from both userspace and optionally, by kernel events (triggers).
				13
Eric Miao	45d16f0	2011-06-15 15:08:40 -0700	[diff] [blame]	14	if NEW_LEDS
				15
Richard Purdie	c72a1d6	2006-03-31 02:31:04 -0800	[diff] [blame]	16	config LEDS_CLASS
Bryan Wu	a403d93	2012-03-23 15:02:14 -0700	[diff] [blame]	17	tristate "LED Class Support"
Richard Purdie	c72a1d6	2006-03-31 02:31:04 -0800	[diff] [blame]	18	help
				19	This option enables the led sysfs class in /sys/class/leds. You'll
				20	need this to do anything useful with LEDs. If unsure, say N.
				21
Jacek Anaszewski	7aea838	2015-01-09 07:22:51 -0800	[diff] [blame]	22	config LEDS_CLASS_FLASH
				23	tristate "LED Flash Class Support"
				24	depends on LEDS_CLASS
				25	help
				26	This option enables the flash led sysfs class in /sys/class/leds.
				27	It wrapps LED Class and adds flash LEDs specific sysfs attributes
				28	and kernel internal API to it. You'll need this to provide support
				29	for the flash related features of a LED device. It can be built
				30	as a module.
				31
Hans de Goede	0cb8eb3	2017-01-29 14:42:52 +0100	[diff] [blame]	32	config LEDS_BRIGHTNESS_HW_CHANGED
				33	bool "LED Class brightness_hw_changed attribute support"
				34	depends on LEDS_CLASS
				35	help
				36	This option enables support for the brightness_hw_changed attribute
				37	for led sysfs class devices under /sys/class/leds.
				38
				39	See Documentation/ABI/testing/sysfs-class-led for details.
				40
Ben Dooks	24f51e8	2006-04-10 22:54:01 -0700	[diff] [blame]	41	comment "LED drivers"
Richard Purdie	c3bc995	2006-03-31 02:31:05 -0800	[diff] [blame]	42
Haojian Zhuang	0a2f915	2010-01-06 17:10:09 -0500	[diff] [blame]	43	config LEDS_88PM860X
				44	tristate "LED Support for Marvell 88PM860x PMIC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	45	depends on LEDS_CLASS
Richard Purdie	37814fd	2010-05-27 13:08:33 +0100	[diff] [blame]	46	depends on MFD_88PM860X
Haojian Zhuang	0a2f915	2010-01-06 17:10:09 -0500	[diff] [blame]	47	help
				48	This option enables support for on-chip LED drivers found on Marvell
				49	Semiconductor 88PM8606 PMIC.
				50
Jacek Anaszewski	49c34b8	2015-04-30 03:34:57 -0700	[diff] [blame]	51	config LEDS_AAT1290
				52	tristate "LED support for the AAT1290"
				53	depends on LEDS_CLASS_FLASH
Randy Dunlap	58d1809	2015-06-26 12:00:20 -0700	[diff] [blame]	54	depends on V4L2_FLASH_LED_CLASS \|\| !V4L2_FLASH_LED_CLASS
Geert Uytterhoeven	6e3956c	2015-07-06 15:42:34 +0200	[diff] [blame]	55	depends on GPIOLIB \|\| COMPILE_TEST
Jacek Anaszewski	49c34b8	2015-04-30 03:34:57 -0700	[diff] [blame]	56	depends on OF
Jacek Anaszewski	ac69b90	2015-06-19 00:33:22 -0700	[diff] [blame]	57	depends on PINCTRL
Jacek Anaszewski	49c34b8	2015-04-30 03:34:57 -0700	[diff] [blame]	58	help
				59	This option enables support for the LEDs on the AAT1290.
				60
Álvaro Fernández Rojas	fd7b025	2015-04-28 09:50:50 -0700	[diff] [blame]	61	config LEDS_BCM6328
				62	tristate "LED Support for Broadcom BCM6328"
				63	depends on LEDS_CLASS
Vegard Nossum	522f17e	2016-01-02 14:05:49 +0100	[diff] [blame]	64	depends on HAS_IOMEM
Álvaro Fernández Rojas	fd7b025	2015-04-28 09:50:50 -0700	[diff] [blame]	65	depends on OF
				66	help
				67	This option enables support for LEDs connected to the BCM6328
				68	LED HW controller accessed via MMIO registers.
				69
Álvaro Fernández Rojas	589fca1	2015-05-21 10:11:10 -0700	[diff] [blame]	70	config LEDS_BCM6358
				71	tristate "LED Support for Broadcom BCM6358"
				72	depends on LEDS_CLASS
Vegard Nossum	522f17e	2016-01-02 14:05:49 +0100	[diff] [blame]	73	depends on HAS_IOMEM
Álvaro Fernández Rojas	589fca1	2015-05-21 10:11:10 -0700	[diff] [blame]	74	depends on OF
				75	help
				76	This option enables support for LEDs connected to the BCM6358
				77	LED HW controller accessed via MMIO registers.
				78
Shreshtha Kumar Sahu	b1e6b70	2011-03-22 16:30:16 -0700	[diff] [blame]	79	config LEDS_LM3530
				80	tristate "LCD Backlight driver for LM3530"
				81	depends on LEDS_CLASS
				82	depends on I2C
				83	help
				84	This option enables support for the LCD backlight using
				85	LM3530 ambient light sensor chip. This ALS chip can be
				86	controlled manually or using PWM input or using ambient
				87	light automatically.
				88
Johan Hovold	401dea7	2012-05-29 15:07:31 -0700	[diff] [blame]	89	config LEDS_LM3533
				90	tristate "LED support for LM3533"
				91	depends on LEDS_CLASS
				92	depends on MFD_LM3533
				93	help
				94	This option enables support for the LEDs on National Semiconductor /
				95	TI LM3533 Lighting Power chips.
				96
				97	The LEDs can be controlled directly, through PWM input, or by the
				98	ambient-light-sensor interface. The chip supports
				99	hardware-accelerated blinking with maximum on and off periods of 9.8
				100	and 77 seconds respectively.
				101
G.Shark Jeong	8b7cfbe	2012-09-12 20:05:50 +0800	[diff] [blame]	102	config LEDS_LM3642
				103	tristate "LED support for LM3642 Chip"
				104	depends on LEDS_CLASS && I2C
				105	select REGMAP_I2C
				106	help
				107	This option enables support for LEDs connected to LM3642.
				108	The LM3642 is a 4MHz fixed-frequency synchronous boost
				109	converter plus 1.5A constant current driver for a high-current
				110	white LED.
				111
				112
Richard Purdie	4d3cb35	2006-03-31 02:31:10 -0800	[diff] [blame]	113	config LEDS_LOCOMO
				114	tristate "LED Support for Locomo device"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	115	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	116	depends on SHARP_LOCOMO
Richard Purdie	4d3cb35	2006-03-31 02:31:10 -0800	[diff] [blame]	117	help
				118	This option enables support for the LEDs on Sharp Locomo.
				119	Zaurus models SL-5500 and SL-5600.
				120
Phil Sutter	ac67e23	2009-01-22 19:35:48 +0100	[diff] [blame]	121	config LEDS_MIKROTIK_RB532
				122	tristate "LED Support for Mikrotik Routerboard 532"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	123	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	124	depends on MIKROTIK_RB532
Phil Sutter	ac67e23	2009-01-22 19:35:48 +0100	[diff] [blame]	125	help
				126	This option enables support for the so called "User LED" of
				127	Mikrotik's Routerboard 532.
				128
Ben Dooks	54bdc47	2006-04-10 22:54:00 -0700	[diff] [blame]	129	config LEDS_S3C24XX
				130	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	131	depends on LEDS_CLASS
Kukjin Kim	b130d5c	2012-02-03 14:29:23 +0900	[diff] [blame]	132	depends on ARCH_S3C24XX
Ben Dooks	54bdc47	2006-04-10 22:54:00 -0700	[diff] [blame]	133	help
				134	This option enables support for LEDs connected to GPIO lines
				135	on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
				136
Chris Boot	1a87d94	2006-07-10 04:45:34 -0700	[diff] [blame]	137	config LEDS_NET48XX
				138	tristate "LED Support for Soekris net48xx series Error LED"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	139	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	140	depends on SCx200_GPIO
Chris Boot	1a87d94	2006-07-10 04:45:34 -0700	[diff] [blame]	141	help
				142	This option enables support for the Soekris net4801 and net4826 error
				143	LED.
				144
Rod Whitby	3b2e46f	2008-04-24 23:43:09 +0100	[diff] [blame]	145	config LEDS_FSG
				146	tristate "LED Support for the Freecom FSG-3"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	147	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	148	depends on MACH_FSG
Rod Whitby	3b2e46f	2008-04-24 23:43:09 +0100	[diff] [blame]	149	help
				150	This option enables support for the LEDs on the Freecom FSG-3.
				151
Kristian Kielhofner	0d75565	2006-12-06 20:37:28 -0800	[diff] [blame]	152	config LEDS_WRAP
				153	tristate "LED Support for the WRAP series LEDs"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	154	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	155	depends on SCx200_GPIO
Kristian Kielhofner	0d75565	2006-12-06 20:37:28 -0800	[diff] [blame]	156	help
				157	This option enables support for the PCEngines WRAP programmable LEDs.
				158
Yoichi Yuasa	f3b6b6c	2007-09-21 00:02:47 +0100	[diff] [blame]	159	config LEDS_COBALT_QUBE
				160	tristate "LED Support for the Cobalt Qube series front LED"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	161	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	162	depends on MIPS_COBALT
Florian Fainelli	2fea6f3	2007-02-12 23:16:27 +0000	[diff] [blame]	163	help
Yoichi Yuasa	f3b6b6c	2007-09-21 00:02:47 +0100	[diff] [blame]	164	This option enables support for the front LED on Cobalt Qube series
Florian Fainelli	2fea6f3	2007-02-12 23:16:27 +0000	[diff] [blame]	165
Yoichi Yuasa	97da7aa	2007-09-27 17:51:05 +0900	[diff] [blame]	166	config LEDS_COBALT_RAQ
				167	bool "LED Support for the Cobalt Raq series"
Yoichi Yuasa	ec14961	2008-12-03 08:09:28 +0000	[diff] [blame]	168	depends on LEDS_CLASS=y && MIPS_COBALT
Yoichi Yuasa	97da7aa	2007-09-27 17:51:05 +0900	[diff] [blame]	169	select LEDS_TRIGGERS
				170	help
				171	This option enables support for the Cobalt Raq series LEDs.
				172
David S. Miller	5843492	2008-08-31 20:26:48 -0700	[diff] [blame]	173	config LEDS_SUNFIRE
				174	tristate "LED support for SunFire servers."
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	175	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	176	depends on SPARC64
David S. Miller	5843492	2008-08-31 20:26:48 -0700	[diff] [blame]	177	select LEDS_TRIGGERS
				178	help
				179	This option enables support for the Left, Middle, and Right
				180	LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
				181
Linus Walleij	4da498fc	2014-07-23 05:36:00 -0700	[diff] [blame]	182	config LEDS_IPAQ_MICRO
				183	tristate "LED Support for the Compaq iPAQ h3xxx"
Jacek Anaszewski	35bfe45	2015-09-07 17:06:05 +0200	[diff] [blame]	184	depends on LEDS_CLASS
Linus Walleij	4da498fc	2014-07-23 05:36:00 -0700	[diff] [blame]	185	depends on MFD_IPAQ_MICRO
				186	help
				187	Choose this option if you want to use the notification LED on
				188	Compaq/HP iPAQ h3100 and h3600.
				189
Kristoffer Ericson	d39a7a6	2008-02-07 10:10:28 +0000	[diff] [blame]	190	config LEDS_HP6XX
				191	tristate "LED Support for the HP Jornada 6xx"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	192	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	193	depends on SH_HP6XX
Kristoffer Ericson	d39a7a6	2008-02-07 10:10:28 +0000	[diff] [blame]	194	help
Matt LaPlante	692105b	2009-01-26 11:12:25 +0100	[diff] [blame]	195	This option enables LED support for the handheld
Kristoffer Ericson	d39a7a6	2008-02-07 10:10:28 +0000	[diff] [blame]	196	HP Jornada 620/660/680/690.
				197
Riku Voipio	e14fa82	2008-05-31 14:43:41 +0100	[diff] [blame]	198	config LEDS_PCA9532
				199	tristate "LED driver for PCA9532 dimmer"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	200	depends on LEDS_CLASS
Kees Cook	5e0b080	2013-01-16 18:53:41 -0800	[diff] [blame]	201	depends on I2C && INPUT
Riku Voipio	e14fa82	2008-05-31 14:43:41 +0100	[diff] [blame]	202	help
				203	This option enables support for NXP pca9532
Matt LaPlante	692105b	2009-01-26 11:12:25 +0100	[diff] [blame]	204	LED controller. It is generally only useful
Riku Voipio	e14fa82	2008-05-31 14:43:41 +0100	[diff] [blame]	205	as a platform driver
				206
Joachim Eastwood	3c1ab50	2011-05-24 17:13:23 -0700	[diff] [blame]	207	config LEDS_PCA9532_GPIO
				208	bool "Enable GPIO support for PCA9532"
				209	depends on LEDS_PCA9532
				210	depends on GPIOLIB
				211	help
				212	Allow unused pins on PCA9532 to be used as gpio.
				213
				214	To use a pin as gpio pca9532_type in pca9532_platform data needs to
				215	set to PCA9532_TYPE_GPIO.
				216
Raphael Assenat	22e03f3	2007-02-27 19:49:53 +0000	[diff] [blame]	217	config LEDS_GPIO
				218	tristate "LED Support for GPIO connected LEDs"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	219	depends on LEDS_CLASS
Geert Uytterhoeven	9ab1963	2015-05-07 01:08:10 -0700	[diff] [blame]	220	depends on GPIOLIB \|\| COMPILE_TEST
Raphael Assenat	22e03f3	2007-02-27 19:49:53 +0000	[diff] [blame]	221	help
				222	This option enables support for the LEDs connected to GPIO
				223	outputs. To be useful the particular board must have LEDs
Trent Piepho	a7d878a	2009-01-10 17:26:01 +0000	[diff] [blame]	224	and they must be connected to the GPIO lines. The LEDs must be
				225	defined as platform devices and/or OpenFirmware platform devices.
				226	The code to use these bindings can be selected below.
				227
Antonio Ospite	5054d39	2009-06-19 13:55:42 +0200	[diff] [blame]	228	config LEDS_LP3944
				229	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	230	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	231	depends on I2C
Antonio Ospite	5054d39	2009-06-19 13:55:42 +0200	[diff] [blame]	232	help
Antonio Ospite	7f1be81	2009-07-03 16:18:45 +0200	[diff] [blame]	233	This option enables support for LEDs connected to the National
				234	Semiconductor LP3944 Lighting Management Unit (LMU) also known as
				235	Fun Light Chip.
Antonio Ospite	5054d39	2009-06-19 13:55:42 +0200	[diff] [blame]	236
				237	To compile this driver as a module, choose M here: the
				238	module will be called leds-lp3944.
				239
Tony Makkiel	d966c94	2016-07-11 11:48:49 +0100	[diff] [blame]	240	config LEDS_LP3952
				241	tristate "LED Support for TI LP3952 2 channel LED driver"
				242	depends on LEDS_CLASS
				243	depends on I2C
				244	depends on ACPI
				245	depends on GPIOLIB
				246	select REGMAP_I2C
				247	help
				248	This option enables support for LEDs connected to the Texas
				249	Instruments LP3952 LED driver.
				250
				251	To compile this driver as a module, choose M here: the
				252	module will be called leds-lp3952.
				253
Milo(Woogyom) Kim	c93d08f	2013-02-05 18:01:23 +0900	[diff] [blame]	254	config LEDS_LP55XX_COMMON
Kim, Milo	33b3a56	2013-07-09 02:11:37 -0700	[diff] [blame]	255	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
				256	depends on LEDS_LP5521 \|\| LEDS_LP5523 \|\| LEDS_LP5562 \|\| LEDS_LP8501
Milo(Woogyom) Kim	10c06d1	2013-02-05 19:17:20 +0900	[diff] [blame]	257	select FW_LOADER
Takashi Iwai	2338f73	2015-09-07 14:25:01 +0200	[diff] [blame]	258	select FW_LOADER_USER_HELPER
Milo(Woogyom) Kim	c93d08f	2013-02-05 18:01:23 +0900	[diff] [blame]	259	help
Kim, Milo	33b3a56	2013-07-09 02:11:37 -0700	[diff] [blame]	260	This option supports common operations for LP5521/5523/55231/5562/8501
Milo(Woogyom) Kim	c93d08f	2013-02-05 18:01:23 +0900	[diff] [blame]	261	devices.
				262
Samu Onkalo	f4920f6	2010-11-11 14:05:23 -0800	[diff] [blame]	263	config LEDS_LP5521
				264	tristate "LED Support for N.S. LP5521 LED driver chip"
				265	depends on LEDS_CLASS && I2C
Milo(Woogyom) Kim	c93d08f	2013-02-05 18:01:23 +0900	[diff] [blame]	266	select LEDS_LP55XX_COMMON
Samu Onkalo	f4920f6	2010-11-11 14:05:23 -0800	[diff] [blame]	267	help
				268	If you say yes here you get support for the National Semiconductor
				269	LP5521 LED driver. It is 3 channel chip with programmable engines.
				270	Driver provides direct control via LED class and interface for
				271	programming the engines.
				272
				273	config LEDS_LP5523
Kim, Milo	ca70532	2012-09-04 15:06:11 +0800	[diff] [blame]	274	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
Samu Onkalo	f4920f6	2010-11-11 14:05:23 -0800	[diff] [blame]	275	depends on LEDS_CLASS && I2C
Milo(Woogyom) Kim	c93d08f	2013-02-05 18:01:23 +0900	[diff] [blame]	276	select LEDS_LP55XX_COMMON
Samu Onkalo	f4920f6	2010-11-11 14:05:23 -0800	[diff] [blame]	277	help
Kim, Milo	ca70532	2012-09-04 15:06:11 +0800	[diff] [blame]	278	If you say yes here you get support for TI/National Semiconductor
				279	LP5523/55231 LED driver.
				280	It is 9 channel chip with programmable engines.
Samu Onkalo	f4920f6	2010-11-11 14:05:23 -0800	[diff] [blame]	281	Driver provides direct control via LED class and interface for
				282	programming the engines.
				283
Kim, Milo	ff45262a	2013-02-18 21:10:14 -0800	[diff] [blame]	284	config LEDS_LP5562
				285	tristate "LED Support for TI LP5562 LED driver chip"
				286	depends on LEDS_CLASS && I2C
				287	select LEDS_LP55XX_COMMON
				288	help
				289	If you say yes here you get support for TI LP5562 LED driver.
				290	It is 4 channels chip with programmable engines.
				291	Driver provides direct control via LED class and interface for
				292	programming the engines.
				293
Kim, Milo	33b3a56	2013-07-09 02:11:37 -0700	[diff] [blame]	294	config LEDS_LP8501
				295	tristate "LED Support for TI LP8501 LED driver chip"
				296	depends on LEDS_CLASS && I2C
				297	select LEDS_LP55XX_COMMON
				298	help
				299	If you say yes here you get support for TI LP8501 LED driver.
				300	It is 9 channel chip with programmable engines.
				301	Driver provides direct control via LED class and interface for
				302	programming the engines.
				303	It is similar as LP5523, but output power selection is available.
				304	And register layout and engine program schemes are different.
				305
Kim, Milo	eb80411	2012-07-20 16:43:59 +0800	[diff] [blame]	306	config LEDS_LP8788
				307	tristate "LED support for the TI LP8788 PMIC"
				308	depends on LEDS_CLASS
				309	depends on MFD_LP8788
				310	help
				311	This option enables support for the Keyboard LEDs on the LP8788 PMIC.
				312
Dan Murphy	7a8685a	2014-11-19 04:48:35 -0800	[diff] [blame]	313	config LEDS_LP8860
				314	tristate "LED support for the TI LP8860 4 channel LED driver"
Axel Lin	2969bb1	2014-11-21 05:48:26 -0800	[diff] [blame]	315	depends on LEDS_CLASS && I2C
				316	select REGMAP_I2C
Dan Murphy	7a8685a	2014-11-19 04:48:35 -0800	[diff] [blame]	317	help
				318	If you say yes here you get support for the TI LP8860 4 channel
				319	LED driver.
				320	This option enables support for the display cluster LEDs
				321	on the LP8860 4 channel LED driver using the I2C communication
				322	bus.
				323
Márton Németh	cec035d	2007-10-31 11:46:41 +0100	[diff] [blame]	324	config LEDS_CLEVO_MAIL
Németh Márton	95dc576	2009-04-03 07:42:47 +0200	[diff] [blame]	325	tristate "Mail LED on Clevo notebook"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	326	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	327	depends on X86 && SERIO_I8042 && DMI
Márton Németh	cec035d	2007-10-31 11:46:41 +0100	[diff] [blame]	328	help
				329	This driver makes the mail LED accessible from userspace
				330	programs through the leds subsystem. This LED have three
				331	known mode: off, blink at 0.5Hz and blink at 1Hz.
				332
Márton Németh	92e015c	2007-10-31 15:09:05 +0100	[diff] [blame]	333	The driver supports two kinds of interface: using ledtrig-timer
				334	or through /sys/class/leds/clevo::mail/brightness. As this LED
				335	cannot change it's brightness it blinks instead. The brightness
				336	value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
				337	blink at 1Hz.
Márton Németh	cec035d	2007-10-31 11:46:41 +0100	[diff] [blame]	338
				339	This module can drive the mail LED for the following notebooks:
				340
Mrton Nmeth	b3ba31f	2008-03-09 20:47:59 +0000	[diff] [blame]	341	Clevo D400P
Márton Németh	cec035d	2007-10-31 11:46:41 +0100	[diff] [blame]	342	Clevo D410J
				343	Clevo D410V
				344	Clevo D400V/D470V (not tested, but might work)
				345	Clevo M540N
				346	Clevo M5x0N (not tested, but might work)
				347	Positivo Mobile (Clevo M5x0V)
				348
Mrton Nmeth	b3ba31f	2008-03-09 20:47:59 +0000	[diff] [blame]	349	If your model is not listed here you can try the "nodetect"
Matt LaPlante	692105b	2009-01-26 11:12:25 +0100	[diff] [blame]	350	module parameter.
Mrton Nmeth	b3ba31f	2008-03-09 20:47:59 +0000	[diff] [blame]	351
Márton Németh	cec035d	2007-10-31 11:46:41 +0100	[diff] [blame]	352	To compile this driver as a module, choose M here: the
				353	module will be called leds-clevo-mail.
				354
Nate Case	f46e920	2008-07-16 22:49:55 +0100	[diff] [blame]	355	config LEDS_PCA955X
				356	tristate "LED Support for PCA955x I2C chips"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	357	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	358	depends on I2C
Nate Case	f46e920	2008-07-16 22:49:55 +0100	[diff] [blame]	359	help
				360	This option enables support for LEDs connected to PCA955x
				361	LED driver chips accessed via the I2C bus. Supported
				362	devices include PCA9550, PCA9551, PCA9552, and PCA9553.
				363
Ricardo Ribalda Delgado	56a1740	2013-08-14 14:23:50 -0700	[diff] [blame]	364	config LEDS_PCA963X
Ricardo Ribalda Delgado	af67384	2013-08-14 14:23:47 -0700	[diff] [blame]	365	tristate "LED support for PCA963x I2C chip"
Peter Meerwald	75cb2e1	2012-03-23 15:02:10 -0700	[diff] [blame]	366	depends on LEDS_CLASS
				367	depends on I2C
				368	help
Ricardo Ribalda Delgado	af67384	2013-08-14 14:23:47 -0700	[diff] [blame]	369	This option enables support for LEDs connected to the PCA963x
				370	LED driver chip accessed via the I2C bus. Supported
				371	devices include PCA9633 and PCA9634
Peter Meerwald	75cb2e1	2012-03-23 15:02:10 -0700	[diff] [blame]	372
Mark Brown	c746b55	2009-09-05 14:09:21 +0100	[diff] [blame]	373	config LEDS_WM831X_STATUS
				374	tristate "LED support for status LEDs on WM831x PMICs"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	375	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	376	depends on MFD_WM831X
Mark Brown	c746b55	2009-09-05 14:09:21 +0100	[diff] [blame]	377	help
				378	This option enables support for the status LEDs of the WM831x
				379	series of PMICs.
				380
Mark Brown	0081e80	2008-12-04 16:52:33 +0000	[diff] [blame]	381	config LEDS_WM8350
				382	tristate "LED Support for WM8350 AudioPlus PMIC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	383	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	384	depends on MFD_WM8350
Mark Brown	0081e80	2008-12-04 16:52:33 +0000	[diff] [blame]	385	help
				386	This option enables support for LEDs driven by the Wolfson
				387	Microelectronics WM8350 AudioPlus PMIC.
				388
Mike Rapoport	9e84561	2008-10-13 09:06:10 +0100	[diff] [blame]	389	config LEDS_DA903X
				390	tristate "LED Support for DA9030/DA9034 PMIC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	391	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	392	depends on PMIC_DA903X
Mike Rapoport	9e84561	2008-10-13 09:06:10 +0100	[diff] [blame]	393	help
				394	This option enables support for on-chip LED drivers found
				395	on Dialog Semiconductor DA9030/DA9034 PMICs.
				396
David Dajun Chen	5ba7363	2012-05-29 15:07:26 -0700	[diff] [blame]	397	config LEDS_DA9052
				398	tristate "Dialog DA9052/DA9053 LEDS"
				399	depends on LEDS_CLASS
				400	depends on PMIC_DA9052
				401	help
				402	This option enables support for on-chip LED drivers found
				403	on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
				404
Guennadi Liakhovetski	ac2dd0f	2009-01-10 18:58:28 +0000	[diff] [blame]	405	config LEDS_DAC124S085
				406	tristate "LED Support for DAC124S085 SPI DAC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	407	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	408	depends on SPI
Guennadi Liakhovetski	ac2dd0f	2009-01-10 18:58:28 +0000	[diff] [blame]	409	help
				410	This option enables support for DAC124S085 SPI DAC from NatSemi,
				411	which can be used to control up to four LEDs.
				412
Luotao Fu	41c42ff	2009-02-11 13:24:40 -0800	[diff] [blame]	413	config LEDS_PWM
				414	tristate "PWM driven LED Support"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	415	depends on LEDS_CLASS
Peter Ujfalusi	ad0ba85	2013-01-23 00:35:04 -0800	[diff] [blame]	416	depends on PWM
Luotao Fu	41c42ff	2009-02-11 13:24:40 -0800	[diff] [blame]	417	help
				418	This option enables support for pwm driven LEDs
				419
Antonio Ospite	d4cc6a2	2009-12-07 15:08:13 +0100	[diff] [blame]	420	config LEDS_REGULATOR
				421	tristate "REGULATOR driven LED support"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	422	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	423	depends on REGULATOR
Antonio Ospite	d4cc6a2	2009-12-07 15:08:13 +0100	[diff] [blame]	424	help
				425	This option enables support for regulator driven LEDs.
				426
Kim Kyuwon	0b56129	2009-03-04 11:59:29 -0800	[diff] [blame]	427	config LEDS_BD2802
				428	tristate "LED driver for BD2802 RGB LED"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	429	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	430	depends on I2C
Kim Kyuwon	0b56129	2009-03-04 11:59:29 -0800	[diff] [blame]	431	help
				432	This option enables support for BD2802GU RGB LED driver chips
				433	accessed via the I2C bus.
				434
Dave Hansen	a328e95	2009-10-01 15:43:32 -0700	[diff] [blame]	435	config LEDS_INTEL_SS4200
				436	tristate "LED driver for Intel NAS SS4200 series"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	437	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	438	depends on PCI && DMI
Martin Dummer	fe15ee4	2016-04-17 13:27:52 +0200	[diff] [blame]	439	depends on X86
Dave Hansen	a328e95	2009-10-01 15:43:32 -0700	[diff] [blame]	440	help
				441	This option enables support for the Intel SS4200 series of
Martin Dummer	fe15ee4	2016-04-17 13:27:52 +0200	[diff] [blame]	442	Network Attached Storage servers. You may control the hard
				443	drive or power LEDs on the front panel. Using this driver
Dave Hansen	a328e95	2009-10-01 15:43:32 -0700	[diff] [blame]	444	can stop the front LED from blinking after startup.
				445
Daniel Mack	a8dd18f	2009-10-15 02:59:35 +0200	[diff] [blame]	446	config LEDS_LT3593
				447	tristate "LED driver for LT3593 controllers"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	448	depends on LEDS_CLASS
Geert Uytterhoeven	8232274	2015-05-05 18:32:25 +0200	[diff] [blame]	449	depends on GPIOLIB \|\| COMPILE_TEST
Daniel Mack	a8dd18f	2009-10-15 02:59:35 +0200	[diff] [blame]	450	help
				451	This option enables support for LEDs driven by a Linear Technology
				452	LT3593 controller. This controller uses a special one-wire pulse
				453	coding protocol to set the brightness.
				454
Michael Hennerich	ed4a10b	2009-10-08 04:00:19 -0400	[diff] [blame]	455	config LEDS_ADP5520
				456	tristate "LED Support for ADP5520/ADP5501 PMIC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	457	depends on LEDS_CLASS
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	458	depends on PMIC_ADP5520
Michael Hennerich	ed4a10b	2009-10-08 04:00:19 -0400	[diff] [blame]	459	help
				460	This option enables support for on-chip LED drivers found
				461	on Analog Devices ADP5520/ADP5501 PMICs.
				462
				463	To compile this driver as a module, choose M here: the module will
				464	be called leds-adp5520.
				465
Bob Rodgers	72dcd8d	2010-02-17 15:23:31 -0600	[diff] [blame]	466	config LEDS_DELL_NETBOOKS
				467	tristate "External LED on Dell Business Netbooks"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	468	depends on LEDS_CLASS
Bob Rodgers	72dcd8d	2010-02-17 15:23:31 -0600	[diff] [blame]	469	depends on X86 && ACPI_WMI
Michał Kępień	cf0d7ea	2016-01-22 15:27:27 +0100	[diff] [blame]	470	depends on DELL_SMBIOS
Bob Rodgers	72dcd8d	2010-02-17 15:23:31 -0600	[diff] [blame]	471	help
				472	This adds support for the Latitude 2100 and similar
				473	notebooks that have an external LED.
				474
Philippe Rétornaz	7fdcef8	2010-05-19 09:24:31 +0200	[diff] [blame]	475	config LEDS_MC13783
Alexander Shiyan	ae6cdb0	2013-06-10 09:59:31 -0700	[diff] [blame]	476	tristate "LED Support for MC13XXX PMIC"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	477	depends on LEDS_CLASS
Alexander Shiyan	ae6cdb0	2013-06-10 09:59:31 -0700	[diff] [blame]	478	depends on MFD_MC13XXX
Philippe Rétornaz	7fdcef8	2010-05-19 09:24:31 +0200	[diff] [blame]	479	help
				480	This option enable support for on-chip LED drivers found
Alexander Shiyan	a59ce65	2014-01-31 22:36:28 -0800	[diff] [blame]	481	on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
Philippe Rétornaz	7fdcef8	2010-05-19 09:24:31 +0200	[diff] [blame]	482
Simon Guinot	11efe71	2010-07-06 16:08:46 +0200	[diff] [blame]	483	config LEDS_NS2
				484	tristate "LED support for Network Space v2 GPIO LEDs"
Johannes Berg	0bae35e	2010-12-02 14:31:14 -0800	[diff] [blame]	485	depends on LEDS_CLASS
Simon Guinot	259f5ba	2015-07-02 19:56:43 +0200	[diff] [blame]	486	depends on MACH_KIRKWOOD \|\| MACH_ARMADA_370
Simon Guinot	11efe71	2010-07-06 16:08:46 +0200	[diff] [blame]	487	default y
				488	help
Simon Guinot	259f5ba	2015-07-02 19:56:43 +0200	[diff] [blame]	489	This option enables support for the dual-GPIO LEDs found on the
				490	following LaCie/Seagate boards:
				491
				492	Network Space v2 (and parents: Max, Mini)
				493	Internet Space v2
				494	d2 Network v2
				495	n090401 (Seagate NAS 4-Bay)
Simon Guinot	11efe71	2010-07-06 16:08:46 +0200	[diff] [blame]	496
Simon Guinot	2446783	2010-10-07 16:38:49 +0200	[diff] [blame]	497	config LEDS_NETXBIG
				498	tristate "LED support for Big Network series LEDs"
Axel Lin	2504f6d	2011-07-25 17:13:16 -0700	[diff] [blame]	499	depends on LEDS_CLASS
Andrew Lunn	1093d8c	2014-08-30 18:46:09 +0200	[diff] [blame]	500	depends on MACH_KIRKWOOD
Simon Guinot	2446783	2010-10-07 16:38:49 +0200	[diff] [blame]	501	default y
				502	help
				503	This option enable support for LEDs found on the LaCie 2Big
				504	and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
				505	controlled through a GPIO extension bus.
				506
Paul Parsons	7d9e7e9	2011-05-13 18:52:56 +0000	[diff] [blame]	507	config LEDS_ASIC3
				508	bool "LED support for the HTC ASIC3"
Axel Lin	9473c4c	2012-06-09 07:41:42 +0800	[diff] [blame]	509	depends on LEDS_CLASS=y
Paul Parsons	7d9e7e9	2011-05-13 18:52:56 +0000	[diff] [blame]	510	depends on MFD_ASIC3
				511	default y
				512	help
				513	This option enables support for the LEDs on the HTC ASIC3. The HTC
				514	ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
				515	cannot be used. This driver supports hardware blinking with an on+off
				516	period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
				517
NeilBrown	a6d511e	2012-01-10 15:09:40 -0800	[diff] [blame]	518	config LEDS_TCA6507
				519	tristate "LED Support for TCA6507 I2C chip"
				520	depends on LEDS_CLASS && I2C
				521	help
				522	This option enables support for LEDs connected to TC6507
				523	LED driver chips accessed via the I2C bus.
				524	Driver support brightness control and hardware-assisted blinking.
				525
Andrew Lunn	e370d01	2015-03-17 15:08:27 -0700	[diff] [blame]	526	config LEDS_TLC591XX
				527	tristate "LED driver for TLC59108 and TLC59116 controllers"
				528	depends on LEDS_CLASS && I2C
				529	select REGMAP_I2C
				530	help
				531	This option enables support for Texas Instruments TLC59108
				532	and TLC59116 LED controllers.
				533
Jacek Anaszewski	a43f6a8	2015-04-30 03:35:10 -0700	[diff] [blame]	534	config LEDS_MAX77693
				535	tristate "LED support for MAX77693 Flash"
				536	depends on LEDS_CLASS_FLASH
Jacek Anaszewski	10c19c9	2015-06-29 07:45:23 -0700	[diff] [blame]	537	depends on V4L2_FLASH_LED_CLASS \|\| !V4L2_FLASH_LED_CLASS
Jacek Anaszewski	a43f6a8	2015-04-30 03:35:10 -0700	[diff] [blame]	538	depends on MFD_MAX77693
				539	depends on OF
				540	help
				541	This option enables support for the flash part of the MAX77693
				542	multifunction device. It has build in control for two leds in flash
				543	and torch mode.
				544
Donggeun Kim	8584cb8	2011-12-14 18:23:56 +0900	[diff] [blame]	545	config LEDS_MAX8997
				546	tristate "LED support for MAX8997 PMIC"
				547	depends on LEDS_CLASS && MFD_MAX8997
				548	help
				549	This option enables support for on-chip LED drivers on
				550	MAXIM MAX8997 PMIC.
				551
G.Shark Jeong	b98d13c	2012-09-05 15:05:58 +0800	[diff] [blame]	552	config LEDS_LM355x
				553	tristate "LED support for LM355x Chips, LM3554 and LM3556"
G.Shark Jeong	32abb478	2012-06-22 08:12:06 +0800	[diff] [blame]	554	depends on LEDS_CLASS && I2C
				555	select REGMAP_I2C
				556	help
G.Shark Jeong	b98d13c	2012-09-05 15:05:58 +0800	[diff] [blame]	557	This option enables support for LEDs connected to LM355x.
				558	LM355x includes Torch, Flash and Indicator functions.
G.Shark Jeong	32abb478	2012-06-22 08:12:06 +0800	[diff] [blame]	559
Sebastian Andrzej Siewior	e9a4593	2012-01-20 14:33:59 -0800	[diff] [blame]	560	config LEDS_OT200
				561	tristate "LED support for the Bachmann OT200"
Jean Delvare	d9e8928	2014-03-11 09:30:53 -0700	[diff] [blame]	562	depends on LEDS_CLASS && HAS_IOMEM && (X86_32 \|\| COMPILE_TEST)
Sebastian Andrzej Siewior	e9a4593	2012-01-20 14:33:59 -0800	[diff] [blame]	563	help
				564	This option enables support for the LEDs on the Bachmann OT200.
				565	Say Y to enable LEDs on the Bachmann OT200.
				566
Andreas Werner	3843363	2014-08-27 19:52:36 +0200	[diff] [blame]	567	config LEDS_MENF21BMC
				568	tristate "LED support for the MEN 14F021P00 BMC"
				569	depends on LEDS_CLASS && MFD_MENF21BMC
				570	help
				571	Say Y here to include support for the MEN 14F021P00 BMC LEDs.
				572
				573	This driver can also be built as a module. If so the module
				574	will be called leds-menf21bmc.
				575
Ingi Kim	b7da8c5	2015-05-12 01:37:57 -0700	[diff] [blame]	576	config LEDS_KTD2692
				577	tristate "LED support for KTD2692 flash LED controller"
Geert Uytterhoeven	6e3956c	2015-07-06 15:42:34 +0200	[diff] [blame]	578	depends on LEDS_CLASS_FLASH && OF
				579	depends on GPIOLIB \|\| COMPILE_TEST
Ingi Kim	b7da8c5	2015-05-12 01:37:57 -0700	[diff] [blame]	580	help
				581	This option enables support for KTD2692 LED flash connected
				582	through ExpressWire interface.
				583
				584	Say Y to enable this driver.
				585
Ralf Baechle	22a1687	2015-08-03 17:04:01 +0200	[diff] [blame]	586	config LEDS_SEAD3
				587	tristate "LED support for the MIPS SEAD 3 board"
				588	depends on LEDS_CLASS && MIPS_SEAD3
				589	help
				590	Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
				591	boards.
				592
				593	This driver can also be built as a module. If so the module
				594	will be called leds-sead3.
				595
H. Nikolaus Schaller	8c40b7d	2016-07-19 13:47:30 +0200	[diff] [blame]	596	config LEDS_IS31FL319X
				597	tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
				598	depends on LEDS_CLASS && I2C && OF
				599	select REGMAP_I2C
				600	help
				601	This option enables support for LEDs connected to ISSI IS31FL319x
				602	fancy LED driver chips accessed via the I2C bus.
				603	Driver supports individual PWM brightness control for each channel.
				604
				605	This driver can also be built as a module. If so the module will be
				606	called leds-is31fl319x.
				607
David Rivshin	9d7cffa	2016-03-07 19:57:15 -0500	[diff] [blame]	608	config LEDS_IS31FL32XX
				609	tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
				610	depends on LEDS_CLASS && I2C && OF
				611	help
David Rivshin	e0442d7d	2016-03-07 19:57:16 -0500	[diff] [blame]	612	Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
				613	LED controllers. They are I2C devices with multiple constant-current
				614	channels, each with independent 256-level PWM control.
David Rivshin	9d7cffa	2016-03-07 19:57:15 -0500	[diff] [blame]	615
Vivien Didelot	f70ed8a	2014-04-14 16:50:19 -0400	[diff] [blame]	616	comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
				617
Jan-Simon Möller	b54cf35	2012-07-20 16:49:06 +0800	[diff] [blame]	618	config LEDS_BLINKM
				619	tristate "LED support for the BlinkM I2C RGB LED"
				620	depends on LEDS_CLASS
				621	depends on I2C
				622	help
				623	This option enables support for the BlinkM RGB LED connected
				624	through I2C. Say Y to enable support for the BlinkM LED.
				625
Vasant Hegde	84ad6e5	2015-08-19 22:19:54 +0530	[diff] [blame]	626	config LEDS_POWERNV
				627	tristate "LED support for PowerNV Platform"
				628	depends on LEDS_CLASS
				629	depends on PPC_POWERNV
				630	depends on OF
				631	help
				632	This option enables support for the system LEDs present on
				633	PowerNV platforms. Say 'y' to enable this support in kernel.
				634	To compile this driver as a module, choose 'm' here: the module
				635	will be called leds-powernv.
				636
Linus Walleij	535f09c	2014-05-22 00:34:16 +0200	[diff] [blame]	637	config LEDS_SYSCON
				638	bool "LED support for LEDs on system controllers"
				639	depends on LEDS_CLASS=y
				640	depends on MFD_SYSCON
				641	depends on OF
				642	help
				643	This option enabled support for the LEDs on syscon type
				644	devices. This will only work with device tree enabled
				645	devices.
				646
Linus Walleij	1dc7d83	2014-02-27 14:44:17 +0100	[diff] [blame]	647	config LEDS_VERSATILE
Arnd Bergmann	a501fd3	2014-05-06 14:58:22 +0200	[diff] [blame]	648	tristate "LED support for the ARM Versatile and RealView"
Linus Walleij	1dc7d83	2014-02-27 14:44:17 +0100	[diff] [blame]	649	depends on ARCH_REALVIEW \|\| ARCH_VERSATILE
				650	depends on LEDS_CLASS
				651	help
				652	This option enabled support for the LEDs on the ARM Versatile
				653	and RealView boards. Say Y to enabled these.
				654
Linus Walleij	7f86698	2016-08-16 11:25:10 +0200	[diff] [blame]	655	config LEDS_PM8058
				656	tristate "LED Support for the Qualcomm PM8058 PMIC"
Linus Walleij	40a3a0f	2016-11-19 16:15:18 +0100	[diff] [blame]	657	depends on MFD_PM8XXX
Linus Walleij	7f86698	2016-08-16 11:25:10 +0200	[diff] [blame]	658	depends on LEDS_CLASS
				659	help
				660	Choose this option if you want to use the LED drivers in
				661	the Qualcomm PM8058 PMIC.
				662
Vadim Pasternak	be4fdf9	2016-09-08 07:25:53 +0000	[diff] [blame]	663	config LEDS_MLXCPLD
				664	tristate "LED support for the Mellanox boards"
				665	depends on X86_64 && DMI
				666	depends on LEDS_CLASS
				667	help
				668	This option enabled support for the LEDs on the Mellanox
				669	boards. Say Y to enabled these.
				670
David Lechner	e381322	2016-09-16 14:16:48 -0500	[diff] [blame]	671	config LEDS_USER
				672	tristate "Userspace LED support"
				673	depends on LEDS_CLASS
				674	help
				675	This option enables support for userspace LEDs. Say 'y' to enable this
				676	support in kernel. To compile this driver as a module, choose 'm' here:
				677	the module will be called uleds.
				678
Hui Chun Ong	8338eab	2016-11-04 13:31:47 +0800	[diff] [blame]	679	config LEDS_NIC78BX
				680	tristate "LED support for NI PXI NIC78bx devices"
				681	depends on LEDS_CLASS
				682	depends on X86 && ACPI
				683	help
				684	This option enables support for the User1 and User2 LEDs on NI
				685	PXI NIC78bx devices.
				686
				687	To compile this driver as a module, choose M here: the module
				688	will be called leds-nic78bx.
				689
H Hartley Sweeten	d09e166	2010-01-20 16:08:30 -0700	[diff] [blame]	690	comment "LED Triggers"
Kim, Milo	f07fb52	2013-02-20 00:36:01 -0800	[diff] [blame]	691	source "drivers/leds/trigger/Kconfig"
Shuah Khan	44e1e9f	2012-05-29 15:07:30 -0700	[diff] [blame]	692
Jan Engelhardt	66242f7	2007-05-10 10:44:11 +0100	[diff] [blame]	693	endif # NEW_LEDS