Wang Xiaoyin | 5c7024a | 2017-06-07 15:06:03 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Device driver for regulators in Hi6421V530 IC |
| 3 | * |
| 4 | * Copyright (c) <2017> HiSilicon Technologies Co., Ltd. |
| 5 | * http://www.hisilicon.com |
| 6 | * Copyright (c) <2017> Linaro Ltd. |
| 7 | * http://www.linaro.org |
| 8 | * |
| 9 | * Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> |
| 10 | * Guodong Xu <guodong.xu@linaro.org> |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify |
| 13 | * it under the terms of the GNU General Public License version 2 as |
| 14 | * published by the Free Software Foundation. |
| 15 | */ |
| 16 | |
| 17 | #include <linux/mfd/hi6421-pmic.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/regmap.h> |
| 22 | #include <linux/regulator/driver.h> |
| 23 | |
| 24 | /* |
| 25 | * struct hi6421v530_regulator_info - hi6421v530 regulator information |
| 26 | * @desc: regulator description |
| 27 | * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep |
| 28 | * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only |
| 29 | */ |
| 30 | struct hi6421v530_regulator_info { |
| 31 | struct regulator_desc rdesc; |
| 32 | u8 mode_mask; |
| 33 | u32 eco_microamp; |
| 34 | }; |
| 35 | |
| 36 | /* HI6421v530 regulators */ |
| 37 | enum hi6421v530_regulator_id { |
| 38 | HI6421V530_LDO3, |
| 39 | HI6421V530_LDO9, |
| 40 | HI6421V530_LDO11, |
| 41 | HI6421V530_LDO15, |
| 42 | HI6421V530_LDO16, |
| 43 | }; |
| 44 | |
| 45 | static const unsigned int ldo_3_voltages[] = { |
| 46 | 1800000, 1825000, 1850000, 1875000, |
| 47 | 1900000, 1925000, 1950000, 1975000, |
| 48 | 2000000, 2025000, 2050000, 2075000, |
| 49 | 2100000, 2125000, 2150000, 2200000, |
| 50 | }; |
| 51 | |
| 52 | static const unsigned int ldo_9_11_voltages[] = { |
| 53 | 1750000, 1800000, 1825000, 2800000, |
| 54 | 2850000, 2950000, 3000000, 3300000, |
| 55 | }; |
| 56 | |
| 57 | static const unsigned int ldo_15_16_voltages[] = { |
| 58 | 1750000, 1800000, 2400000, 2600000, |
| 59 | 2700000, 2850000, 2950000, 3000000, |
| 60 | }; |
| 61 | |
| 62 | static const struct regulator_ops hi6421v530_ldo_ops; |
| 63 | |
| 64 | #define HI6421V530_LDO_ENABLE_TIME (350) |
| 65 | |
| 66 | /* |
| 67 | * _id - LDO id name string |
| 68 | * v_table - voltage table |
| 69 | * vreg - voltage select register |
| 70 | * vmask - voltage select mask |
| 71 | * ereg - enable register |
| 72 | * emask - enable mask |
| 73 | * odelay - off/on delay time in uS |
| 74 | * ecomask - eco mode mask |
| 75 | * ecoamp - eco mode load uppler limit in uA |
| 76 | */ |
| 77 | #define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \ |
| 78 | odelay, ecomask, ecoamp) { \ |
| 79 | .rdesc = { \ |
| 80 | .name = #_ID, \ |
| 81 | .of_match = of_match_ptr(#_ID), \ |
| 82 | .regulators_node = of_match_ptr("regulators"), \ |
| 83 | .ops = &hi6421v530_ldo_ops, \ |
| 84 | .type = REGULATOR_VOLTAGE, \ |
| 85 | .id = HI6421V530_##_ID, \ |
| 86 | .owner = THIS_MODULE, \ |
| 87 | .n_voltages = ARRAY_SIZE(v_table), \ |
| 88 | .volt_table = v_table, \ |
| 89 | .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ |
| 90 | .vsel_mask = vmask, \ |
| 91 | .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ |
| 92 | .enable_mask = emask, \ |
| 93 | .enable_time = HI6421V530_LDO_ENABLE_TIME, \ |
| 94 | .off_on_delay = odelay, \ |
| 95 | }, \ |
| 96 | .mode_mask = ecomask, \ |
| 97 | .eco_microamp = ecoamp, \ |
| 98 | } |
| 99 | |
| 100 | /* HI6421V530 regulator information */ |
| 101 | |
| 102 | static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = { |
| 103 | HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2, |
| 104 | 20000, 0x6, 8000), |
| 105 | HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2, |
| 106 | 40000, 0x6, 8000), |
| 107 | HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2, |
| 108 | 40000, 0x6, 8000), |
| 109 | HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2, |
| 110 | 40000, 0x6, 8000), |
| 111 | HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2, |
| 112 | 40000, 0x6, 8000), |
| 113 | }; |
| 114 | |
| 115 | static unsigned int hi6421v530_regulator_ldo_get_mode( |
| 116 | struct regulator_dev *rdev) |
| 117 | { |
| 118 | struct hi6421v530_regulator_info *info; |
| 119 | unsigned int reg_val; |
| 120 | |
| 121 | info = rdev_get_drvdata(rdev); |
| 122 | regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); |
| 123 | |
| 124 | if (reg_val & (info->mode_mask)) |
| 125 | return REGULATOR_MODE_IDLE; |
| 126 | |
| 127 | return REGULATOR_MODE_NORMAL; |
| 128 | } |
| 129 | |
| 130 | static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev, |
| 131 | unsigned int mode) |
| 132 | { |
| 133 | struct hi6421v530_regulator_info *info; |
| 134 | unsigned int new_mode; |
| 135 | |
| 136 | info = rdev_get_drvdata(rdev); |
| 137 | switch (mode) { |
| 138 | case REGULATOR_MODE_NORMAL: |
| 139 | new_mode = 0; |
| 140 | break; |
| 141 | case REGULATOR_MODE_IDLE: |
| 142 | new_mode = info->mode_mask; |
| 143 | break; |
| 144 | default: |
| 145 | return -EINVAL; |
| 146 | } |
| 147 | |
| 148 | regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| 149 | info->mode_mask, new_mode); |
| 150 | |
| 151 | return 0; |
| 152 | } |
| 153 | |
| 154 | |
| 155 | static const struct regulator_ops hi6421v530_ldo_ops = { |
| 156 | .is_enabled = regulator_is_enabled_regmap, |
| 157 | .enable = regulator_enable_regmap, |
| 158 | .disable = regulator_disable_regmap, |
| 159 | .list_voltage = regulator_list_voltage_table, |
| 160 | .map_voltage = regulator_map_voltage_ascend, |
| 161 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 162 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 163 | .get_mode = hi6421v530_regulator_ldo_get_mode, |
| 164 | .set_mode = hi6421v530_regulator_ldo_set_mode, |
| 165 | }; |
| 166 | |
| 167 | static int hi6421v530_regulator_probe(struct platform_device *pdev) |
| 168 | { |
| 169 | struct hi6421_pmic *pmic; |
| 170 | struct regulator_dev *rdev; |
| 171 | struct regulator_config config = { }; |
| 172 | unsigned int i; |
| 173 | |
| 174 | pmic = dev_get_drvdata(pdev->dev.parent); |
| 175 | if (!pmic) { |
| 176 | dev_err(&pdev->dev, "no pmic in the regulator parent node\n"); |
| 177 | return -ENODEV; |
| 178 | } |
| 179 | |
| 180 | for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) { |
| 181 | config.dev = pdev->dev.parent; |
| 182 | config.regmap = pmic->regmap; |
| 183 | config.driver_data = &hi6421v530_regulator_info[i]; |
| 184 | |
| 185 | rdev = devm_regulator_register(&pdev->dev, |
| 186 | &hi6421v530_regulator_info[i].rdesc, |
| 187 | &config); |
| 188 | if (IS_ERR(rdev)) { |
| 189 | dev_err(&pdev->dev, "failed to register regulator %s\n", |
| 190 | hi6421v530_regulator_info[i].rdesc.name); |
| 191 | return PTR_ERR(rdev); |
| 192 | } |
| 193 | } |
| 194 | return 0; |
| 195 | } |
| 196 | |
Guodong Xu | ded7b2a | 2017-06-14 23:11:06 +0800 | [diff] [blame] | 197 | static const struct platform_device_id hi6421v530_regulator_table[] = { |
| 198 | { .name = "hi6421v530-regulator" }, |
| 199 | {}, |
| 200 | }; |
| 201 | MODULE_DEVICE_TABLE(platform, hi6421v530_regulator_table); |
| 202 | |
Wang Xiaoyin | 5c7024a | 2017-06-07 15:06:03 +0800 | [diff] [blame] | 203 | static struct platform_driver hi6421v530_regulator_driver = { |
Guodong Xu | ded7b2a | 2017-06-14 23:11:06 +0800 | [diff] [blame] | 204 | .id_table = hi6421v530_regulator_table, |
Wang Xiaoyin | 5c7024a | 2017-06-07 15:06:03 +0800 | [diff] [blame] | 205 | .driver = { |
| 206 | .name = "hi6421v530-regulator", |
| 207 | }, |
| 208 | .probe = hi6421v530_regulator_probe, |
| 209 | }; |
| 210 | module_platform_driver(hi6421v530_regulator_driver); |
| 211 | |
| 212 | MODULE_AUTHOR("Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>"); |
| 213 | MODULE_DESCRIPTION("Hi6421v530 regulator driver"); |
| 214 | MODULE_LICENSE("GPL v2"); |