drivers/net/dsa/rtl8366.c - SHIFTPHONES/mainline/linux - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /* Realtek SMI library helpers for the RTL8366x variants
  * RTL8366RB and RTL8366S
  *
  * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
  * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
  * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
  * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
  */
 #include <linux/if_bridge.h>
 #include <net/dsa.h>

 #include "realtek-smi-core.h"

 int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
 {
 	int ret;
 	int i;

 	*used = 0;
 	for (i = 0; i < smi->num_ports; i++) {
 		int index = 0;

 		ret = smi->ops->get_mc_index(smi, i, &index);
 		if (ret)
 			return ret;

 		if (mc_index == index) {
 			*used = 1;
 			break;
 		}
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);

 /**
  * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
  * @smi: the Realtek SMI device instance
  * @vid: the VLAN ID to look up or allocate
  * @vlanmc: the pointer will be assigned to a pointer to a valid member config
  * if successful
  * @return: index of a new member config or negative error number
  */
 static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid,
 			     struct rtl8366_vlan_mc *vlanmc)
 {
 	struct rtl8366_vlan_4k vlan4k;
 	int ret;
 	int i;

 	/* Try to find an existing member config entry for this VID */
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
 		if (ret) {
 			dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
 				i, vid);
 			return ret;
 		}

 		if (vid == vlanmc->vid)
 			return i;
 	}

 	/* We have no MC entry for this VID, try to find an empty one */
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
 		if (ret) {
 			dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
 				i, vid);
 			return ret;
 		}

 		if (vlanmc->vid == 0 && vlanmc->member == 0) {
 			/* Update the entry from the 4K table */
 			ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
 			if (ret) {
 				dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n",
 					i, vid);
 				return ret;
 			}

 			vlanmc->vid = vid;
 			vlanmc->member = vlan4k.member;
 			vlanmc->untag = vlan4k.untag;
 			vlanmc->fid = vlan4k.fid;
 			ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
 			if (ret) {
 				dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
 					i, vid);
 				return ret;
 			}

 			dev_dbg(smi->dev, "created new MC at index %d for VID %d\n",
 				i, vid);
 			return i;
 		}
 	}

 	/* MC table is full, try to find an unused entry and replace it */
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		int used;

 		ret = rtl8366_mc_is_used(smi, i, &used);
 		if (ret)
 			return ret;

 		if (!used) {
 			/* Update the entry from the 4K table */
 			ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
 			if (ret)
 				return ret;

 			vlanmc->vid = vid;
 			vlanmc->member = vlan4k.member;
 			vlanmc->untag = vlan4k.untag;
 			vlanmc->fid = vlan4k.fid;
 			ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
 			if (ret) {
 				dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
 					i, vid);
 				return ret;
 			}
 			dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n",
 				i, vid);
 			return i;
 		}
 	}

 	dev_err(smi->dev, "all VLAN member configurations are in use\n");
 	return -ENOSPC;
 }

 int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
 		     u32 untag, u32 fid)
 {
 	struct rtl8366_vlan_mc vlanmc;
 	struct rtl8366_vlan_4k vlan4k;
 	int mc;
 	int ret;

 	if (!smi->ops->is_vlan_valid(smi, vid))
 		return -EINVAL;

 	dev_dbg(smi->dev,
 		"setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
 		vid, member, untag);

 	/* Update the 4K table */
 	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
 	if (ret)
 		return ret;

 	vlan4k.member |= member;
 	vlan4k.untag |= untag;
 	vlan4k.fid = fid;
 	ret = smi->ops->set_vlan_4k(smi, &vlan4k);
 	if (ret)
 		return ret;

 	dev_dbg(smi->dev,
 		"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
 		vid, vlan4k.member, vlan4k.untag);

 	/* Find or allocate a member config for this VID */
 	ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
 	if (ret < 0)
 		return ret;
 	mc = ret;

 	/* Update the MC entry */
 	vlanmc.member |= member;
 	vlanmc.untag |= untag;
 	vlanmc.fid = fid;

 	/* Commit updates to the MC entry */
 	ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc);
 	if (ret)
 		dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
 			mc, vid);
 	else
 		dev_dbg(smi->dev,
 			"resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
 			vid, vlanmc.member, vlanmc.untag);

 	return ret;
 }
 EXPORT_SYMBOL_GPL(rtl8366_set_vlan);

 int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
 		     unsigned int vid)
 {
 	struct rtl8366_vlan_mc vlanmc;
 	int mc;
 	int ret;

 	if (!smi->ops->is_vlan_valid(smi, vid))
 		return -EINVAL;

 	/* Find or allocate a member config for this VID */
 	ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
 	if (ret < 0)
 		return ret;
 	mc = ret;

 	ret = smi->ops->set_mc_index(smi, port, mc);
 	if (ret) {
 		dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n",
 			mc, port);
 		return ret;
 	}

 	dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
 		port, vid, mc);

 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_set_pvid);

 int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable)
 {
 	int ret;

 	/* To enable 4k VLAN, ordinary VLAN must be enabled first,
 	 * but if we disable 4k VLAN it is fine to leave ordinary
 	 * VLAN enabled.
 	 */
 	if (enable) {
 		/* Make sure VLAN is ON */
 		ret = smi->ops->enable_vlan(smi, true);
 		if (ret)
 			return ret;

 		smi->vlan_enabled = true;
 	}

 	ret = smi->ops->enable_vlan4k(smi, enable);
 	if (ret)
 		return ret;

 	smi->vlan4k_enabled = enable;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);

 int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable)
 {
 	int ret;

 	ret = smi->ops->enable_vlan(smi, enable);
 	if (ret)
 		return ret;

 	smi->vlan_enabled = enable;

 	/* If we turn VLAN off, make sure that we turn off
 	 * 4k VLAN as well, if that happened to be on.
 	 */
 	if (!enable) {
 		smi->vlan4k_enabled = false;
 		ret = smi->ops->enable_vlan4k(smi, false);
 	}

 	return ret;
 }
 EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);

 int rtl8366_reset_vlan(struct realtek_smi *smi)
 {
 	struct rtl8366_vlan_mc vlanmc;
 	int ret;
 	int i;

 	rtl8366_enable_vlan(smi, false);
 	rtl8366_enable_vlan4k(smi, false);

 	/* Clear the 16 VLAN member configurations */
 	vlanmc.vid = 0;
 	vlanmc.priority = 0;
 	vlanmc.member = 0;
 	vlanmc.untag = 0;
 	vlanmc.fid = 0;
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
 		if (ret)
 			return ret;
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);

 int rtl8366_init_vlan(struct realtek_smi *smi)
 {
 	int port;
 	int ret;

 	ret = rtl8366_reset_vlan(smi);
 	if (ret)
 		return ret;

 	/* Loop over the available ports, for each port, associate
 	 * it with the VLAN (port+1)
 	 */
 	for (port = 0; port < smi->num_ports; port++) {
 		u32 mask;

 		if (port == smi->cpu_port)
 			/* For the CPU port, make all ports members of this
 			 * VLAN.
 			 */
 			mask = GENMASK((int)smi->num_ports - 1, 0);
 		else
 			/* For all other ports, enable itself plus the
 			 * CPU port.
 			 */
 			mask = BIT(port) | BIT(smi->cpu_port);

 		/* For each port, set the port as member of VLAN (port+1)
 		 * and untagged, except for the CPU port: the CPU port (5) is
 		 * member of VLAN 6 and so are ALL the other ports as well.
 		 * Use filter 0 (no filter).
 		 */
 		dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
 			 (port + 1), port, mask);
 		ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
 		if (ret)
 			return ret;

 		dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
 			 (port + 1), port, (port + 1));
 		ret = rtl8366_set_pvid(smi, port, (port + 1));
 		if (ret)
 			return ret;
 	}

 	return rtl8366_enable_vlan(smi, true);
 }
 EXPORT_SYMBOL_GPL(rtl8366_init_vlan);

 int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 			   struct switchdev_trans *trans)
 {
 	struct realtek_smi *smi = ds->priv;
 	struct rtl8366_vlan_4k vlan4k;
 	int ret;

 	/* Use VLAN nr port + 1 since VLAN0 is not valid */
 	if (switchdev_trans_ph_prepare(trans)) {
 		if (!smi->ops->is_vlan_valid(smi, port + 1))
 			return -EINVAL;

 		return 0;
 	}

 	dev_info(smi->dev, "%s filtering on port %d\n",
 		 vlan_filtering ? "enable" : "disable",
 		 port);

 	/* TODO:
 	 * The hardware support filter ID (FID) 0..7, I have no clue how to
 	 * support this in the driver when the callback only says on/off.
 	 */
 	ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
 	if (ret)
 		return ret;

 	/* Just set the filter to FID 1 for now then */
 	ret = rtl8366_set_vlan(smi, port + 1,
 			       vlan4k.member,
 			       vlan4k.untag,
 			       1);
 	if (ret)
 		return ret;

 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);

 int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
 			 const struct switchdev_obj_port_vlan *vlan)
 {
 	struct realtek_smi *smi = ds->priv;
 	u16 vid;

 	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
 		if (!smi->ops->is_vlan_valid(smi, vid))
 			return -EINVAL;

 	dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
 		 vlan->vid_begin, vlan->vid_end);

 	/* Enable VLAN in the hardware
 	 * FIXME: what's with this 4k business?
 	 * Just rtl8366_enable_vlan() seems inconclusive.
 	 */
 	return rtl8366_enable_vlan4k(smi, true);
 }
 EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare);

 void rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		      const struct switchdev_obj_port_vlan *vlan)
 {
 	bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
 	bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
 	struct realtek_smi *smi = ds->priv;
 	u32 member = 0;
 	u32 untag = 0;
 	u16 vid;
 	int ret;

 	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
 		if (!smi->ops->is_vlan_valid(smi, vid))
 			return;

 	dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
 		 vlan->vid_begin,
 		 port,
 		 untagged ? "untagged" : "tagged",
 		 pvid ? " PVID" : "no PVID");

 	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
 		dev_err(smi->dev, "port is DSA or CPU port\n");

 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 		member |= BIT(port);

 		if (untagged)
 			untag |= BIT(port);

 		ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
 		if (ret)
 			dev_err(smi->dev,
 				"failed to set up VLAN %04x",
 				vid);

 		if (!pvid)
 			continue;

 		ret = rtl8366_set_pvid(smi, port, vid);
 		if (ret)
 			dev_err(smi->dev,
 				"failed to set PVID on port %d to VLAN %04x",
 				port, vid);

 		if (!ret)
 			dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n",
 				vid, port);
 	}
 }
 EXPORT_SYMBOL_GPL(rtl8366_vlan_add);

 int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 		     const struct switchdev_obj_port_vlan *vlan)
 {
 	struct realtek_smi *smi = ds->priv;
 	u16 vid;
 	int ret;

 	dev_info(smi->dev, "del VLAN on port %d\n", port);

 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
 		int i;

 		dev_info(smi->dev, "del VLAN %04x\n", vid);

 		for (i = 0; i < smi->num_vlan_mc; i++) {
 			struct rtl8366_vlan_mc vlanmc;

 			ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
 			if (ret)
 				return ret;

 			if (vid == vlanmc.vid) {
 				/* Remove this port from the VLAN */
 				vlanmc.member &= ~BIT(port);
 				vlanmc.untag &= ~BIT(port);
 				/*
 				 * If no ports are members of this VLAN
 				 * anymore then clear the whole member
 				 * config so it can be reused.
 				 */
 				if (!vlanmc.member && vlanmc.untag) {
 					vlanmc.vid = 0;
 					vlanmc.priority = 0;
 					vlanmc.fid = 0;
 				}
 				ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
 				if (ret) {
 					dev_err(smi->dev,
 						"failed to remove VLAN %04x\n",
 						vid);
 					return ret;
 				}
 				break;
 			}
 		}
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(rtl8366_vlan_del);

 void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
 			 uint8_t *data)
 {
 	struct realtek_smi *smi = ds->priv;
 	struct rtl8366_mib_counter *mib;
 	int i;

 	if (port >= smi->num_ports)
 		return;

 	for (i = 0; i < smi->num_mib_counters; i++) {
 		mib = &smi->mib_counters[i];
 		strncpy(data + i * ETH_GSTRING_LEN,
 			mib->name, ETH_GSTRING_LEN);
 	}
 }
 EXPORT_SYMBOL_GPL(rtl8366_get_strings);

 int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
 {
 	struct realtek_smi *smi = ds->priv;

 	/* We only support SS_STATS */
 	if (sset != ETH_SS_STATS)
 		return 0;
 	if (port >= smi->num_ports)
 		return -EINVAL;

 	return smi->num_mib_counters;
 }
 EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);

 void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
 {
 	struct realtek_smi *smi = ds->priv;
 	int i;
 	int ret;

 	if (port >= smi->num_ports)
 		return;

 	for (i = 0; i < smi->num_mib_counters; i++) {
 		struct rtl8366_mib_counter *mib;
 		u64 mibvalue = 0;

 		mib = &smi->mib_counters[i];
 		ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue);
 		if (ret) {
 			dev_err(smi->dev, "error reading MIB counter %s\n",
 				mib->name);
 		}
 		data[i] = mibvalue;
 	}
 }
 EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);
	// SPDX-License-Identifier: GPL-2.0
	/* Realtek SMI library helpers for the RTL8366x variants
	* RTL8366RB and RTL8366S
	*
	* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
	* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
	* Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
	* Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
	* Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
	*/
	#include <linux/if_bridge.h>
	#include <net/dsa.h>

	#include "realtek-smi-core.h"

	int rtl8366_mc_is_used(struct realtek_smi smi, int mc_index, int used)
	{
	int ret;
	int i;

	*used = 0;
	for (i = 0; i < smi->num_ports; i++) {
	int index = 0;

	ret = smi->ops->get_mc_index(smi, i, &index);
	if (ret)
	return ret;

	if (mc_index == index) {
	*used = 1;
	break;
	}
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);

	/**
	* rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
	* @smi: the Realtek SMI device instance
	* @vid: the VLAN ID to look up or allocate
	* @vlanmc: the pointer will be assigned to a pointer to a valid member config
	* if successful
	* @return: index of a new member config or negative error number
	*/
	static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid,
	struct rtl8366_vlan_mc *vlanmc)
	{
	struct rtl8366_vlan_4k vlan4k;
	int ret;
	int i;

	/* Try to find an existing member config entry for this VID */
	for (i = 0; i < smi->num_vlan_mc; i++) {
	ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
	if (ret) {
	dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
	i, vid);
	return ret;
	}

	if (vid == vlanmc->vid)
	return i;
	}

	/* We have no MC entry for this VID, try to find an empty one */
	for (i = 0; i < smi->num_vlan_mc; i++) {
	ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
	if (ret) {
	dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
	i, vid);
	return ret;
	}

	if (vlanmc->vid == 0 && vlanmc->member == 0) {
	/* Update the entry from the 4K table */
	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
	if (ret) {
	dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n",
	i, vid);
	return ret;
	}

	vlanmc->vid = vid;
	vlanmc->member = vlan4k.member;
	vlanmc->untag = vlan4k.untag;
	vlanmc->fid = vlan4k.fid;
	ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
	if (ret) {
	dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
	i, vid);
	return ret;
	}

	dev_dbg(smi->dev, "created new MC at index %d for VID %d\n",
	i, vid);
	return i;
	}
	}

	/* MC table is full, try to find an unused entry and replace it */
	for (i = 0; i < smi->num_vlan_mc; i++) {
	int used;

	ret = rtl8366_mc_is_used(smi, i, &used);
	if (ret)
	return ret;

	if (!used) {
	/* Update the entry from the 4K table */
	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
	if (ret)
	return ret;

	vlanmc->vid = vid;
	vlanmc->member = vlan4k.member;
	vlanmc->untag = vlan4k.untag;
	vlanmc->fid = vlan4k.fid;
	ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
	if (ret) {
	dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
	i, vid);
	return ret;
	}
	dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n",
	i, vid);
	return i;
	}
	}

	dev_err(smi->dev, "all VLAN member configurations are in use\n");
	return -ENOSPC;
	}

	int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
	u32 untag, u32 fid)
	{
	struct rtl8366_vlan_mc vlanmc;
	struct rtl8366_vlan_4k vlan4k;
	int mc;
	int ret;

	if (!smi->ops->is_vlan_valid(smi, vid))
	return -EINVAL;

	dev_dbg(smi->dev,
	"setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
	vid, member, untag);

	/* Update the 4K table */
	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
	if (ret)
	return ret;

	vlan4k.member \|= member;
	vlan4k.untag \|= untag;
	vlan4k.fid = fid;
	ret = smi->ops->set_vlan_4k(smi, &vlan4k);
	if (ret)
	return ret;

	dev_dbg(smi->dev,
	"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
	vid, vlan4k.member, vlan4k.untag);

	/* Find or allocate a member config for this VID */
	ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
	if (ret < 0)
	return ret;
	mc = ret;

	/* Update the MC entry */
	vlanmc.member \|= member;
	vlanmc.untag \|= untag;
	vlanmc.fid = fid;

	/* Commit updates to the MC entry */
	ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc);
	if (ret)
	dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
	mc, vid);
	else
	dev_dbg(smi->dev,
	"resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
	vid, vlanmc.member, vlanmc.untag);

	return ret;
	}
	EXPORT_SYMBOL_GPL(rtl8366_set_vlan);

	int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
	unsigned int vid)
	{
	struct rtl8366_vlan_mc vlanmc;
	int mc;
	int ret;

	if (!smi->ops->is_vlan_valid(smi, vid))
	return -EINVAL;

	/* Find or allocate a member config for this VID */
	ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
	if (ret < 0)
	return ret;
	mc = ret;

	ret = smi->ops->set_mc_index(smi, port, mc);
	if (ret) {
	dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n",
	mc, port);
	return ret;
	}

	dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
	port, vid, mc);

	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_set_pvid);

	int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable)
	{
	int ret;

	/* To enable 4k VLAN, ordinary VLAN must be enabled first,
	* but if we disable 4k VLAN it is fine to leave ordinary
	* VLAN enabled.
	*/
	if (enable) {
	/* Make sure VLAN is ON */
	ret = smi->ops->enable_vlan(smi, true);
	if (ret)
	return ret;

	smi->vlan_enabled = true;
	}

	ret = smi->ops->enable_vlan4k(smi, enable);
	if (ret)
	return ret;

	smi->vlan4k_enabled = enable;
	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);

	int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable)
	{
	int ret;

	ret = smi->ops->enable_vlan(smi, enable);
	if (ret)
	return ret;

	smi->vlan_enabled = enable;

	/* If we turn VLAN off, make sure that we turn off
	* 4k VLAN as well, if that happened to be on.
	*/
	if (!enable) {
	smi->vlan4k_enabled = false;
	ret = smi->ops->enable_vlan4k(smi, false);
	}

	return ret;
	}
	EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);

	int rtl8366_reset_vlan(struct realtek_smi *smi)
	{
	struct rtl8366_vlan_mc vlanmc;
	int ret;
	int i;

	rtl8366_enable_vlan(smi, false);
	rtl8366_enable_vlan4k(smi, false);

	/* Clear the 16 VLAN member configurations */
	vlanmc.vid = 0;
	vlanmc.priority = 0;
	vlanmc.member = 0;
	vlanmc.untag = 0;
	vlanmc.fid = 0;
	for (i = 0; i < smi->num_vlan_mc; i++) {
	ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
	if (ret)
	return ret;
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);

	int rtl8366_init_vlan(struct realtek_smi *smi)
	{
	int port;
	int ret;

	ret = rtl8366_reset_vlan(smi);
	if (ret)
	return ret;

	/* Loop over the available ports, for each port, associate
	* it with the VLAN (port+1)
	*/
	for (port = 0; port < smi->num_ports; port++) {
	u32 mask;

	if (port == smi->cpu_port)
	/* For the CPU port, make all ports members of this
	* VLAN.
	*/
	mask = GENMASK((int)smi->num_ports - 1, 0);
	else
	/* For all other ports, enable itself plus the
	* CPU port.
	*/
	mask = BIT(port) \| BIT(smi->cpu_port);

	/* For each port, set the port as member of VLAN (port+1)
	* and untagged, except for the CPU port: the CPU port (5) is
	* member of VLAN 6 and so are ALL the other ports as well.
	* Use filter 0 (no filter).
	*/
	dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
	(port + 1), port, mask);
	ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
	if (ret)
	return ret;

	dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
	(port + 1), port, (port + 1));
	ret = rtl8366_set_pvid(smi, port, (port + 1));
	if (ret)
	return ret;
	}

	return rtl8366_enable_vlan(smi, true);
	}
	EXPORT_SYMBOL_GPL(rtl8366_init_vlan);

	int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
	struct switchdev_trans *trans)
	{
	struct realtek_smi *smi = ds->priv;
	struct rtl8366_vlan_4k vlan4k;
	int ret;

	/* Use VLAN nr port + 1 since VLAN0 is not valid */
	if (switchdev_trans_ph_prepare(trans)) {
	if (!smi->ops->is_vlan_valid(smi, port + 1))
	return -EINVAL;

	return 0;
	}

	dev_info(smi->dev, "%s filtering on port %d\n",
	vlan_filtering ? "enable" : "disable",
	port);

	/* TODO:
	* The hardware support filter ID (FID) 0..7, I have no clue how to
	* support this in the driver when the callback only says on/off.
	*/
	ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
	if (ret)
	return ret;

	/* Just set the filter to FID 1 for now then */
	ret = rtl8366_set_vlan(smi, port + 1,
	vlan4k.member,
	vlan4k.untag,
	1);
	if (ret)
	return ret;

	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);

	int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
	const struct switchdev_obj_port_vlan *vlan)
	{
	struct realtek_smi *smi = ds->priv;
	u16 vid;

	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
	if (!smi->ops->is_vlan_valid(smi, vid))
	return -EINVAL;

	dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
	vlan->vid_begin, vlan->vid_end);

	/* Enable VLAN in the hardware
	* FIXME: what's with this 4k business?
	* Just rtl8366_enable_vlan() seems inconclusive.
	*/
	return rtl8366_enable_vlan4k(smi, true);
	}
	EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare);

	void rtl8366_vlan_add(struct dsa_switch *ds, int port,
	const struct switchdev_obj_port_vlan *vlan)
	{
	bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
	bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
	struct realtek_smi *smi = ds->priv;
	u32 member = 0;
	u32 untag = 0;
	u16 vid;
	int ret;

	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
	if (!smi->ops->is_vlan_valid(smi, vid))
	return;

	dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
	vlan->vid_begin,
	port,
	untagged ? "untagged" : "tagged",
	pvid ? " PVID" : "no PVID");

	if (dsa_is_dsa_port(ds, port) \|\| dsa_is_cpu_port(ds, port))
	dev_err(smi->dev, "port is DSA or CPU port\n");

	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
	member \|= BIT(port);

	if (untagged)
	untag \|= BIT(port);

	ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
	if (ret)
	dev_err(smi->dev,
	"failed to set up VLAN %04x",
	vid);

	if (!pvid)
	continue;

	ret = rtl8366_set_pvid(smi, port, vid);
	if (ret)
	dev_err(smi->dev,
	"failed to set PVID on port %d to VLAN %04x",
	port, vid);

	if (!ret)
	dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n",
	vid, port);
	}
	}
	EXPORT_SYMBOL_GPL(rtl8366_vlan_add);

	int rtl8366_vlan_del(struct dsa_switch *ds, int port,
	const struct switchdev_obj_port_vlan *vlan)
	{
	struct realtek_smi *smi = ds->priv;
	u16 vid;
	int ret;

	dev_info(smi->dev, "del VLAN on port %d\n", port);

	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
	int i;

	dev_info(smi->dev, "del VLAN %04x\n", vid);

	for (i = 0; i < smi->num_vlan_mc; i++) {
	struct rtl8366_vlan_mc vlanmc;

	ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
	if (ret)
	return ret;

	if (vid == vlanmc.vid) {
	/* Remove this port from the VLAN */
	vlanmc.member &= ~BIT(port);
	vlanmc.untag &= ~BIT(port);
	/*
	* If no ports are members of this VLAN
	* anymore then clear the whole member
	* config so it can be reused.
	*/
	if (!vlanmc.member && vlanmc.untag) {
	vlanmc.vid = 0;
	vlanmc.priority = 0;
	vlanmc.fid = 0;
	}
	ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
	if (ret) {
	dev_err(smi->dev,
	"failed to remove VLAN %04x\n",
	vid);
	return ret;
	}
	break;
	}
	}
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(rtl8366_vlan_del);

	void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
	uint8_t *data)
	{
	struct realtek_smi *smi = ds->priv;
	struct rtl8366_mib_counter *mib;
	int i;

	if (port >= smi->num_ports)
	return;

	for (i = 0; i < smi->num_mib_counters; i++) {
	mib = &smi->mib_counters[i];
	strncpy(data + i * ETH_GSTRING_LEN,
	mib->name, ETH_GSTRING_LEN);
	}
	}
	EXPORT_SYMBOL_GPL(rtl8366_get_strings);

	int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
	{
	struct realtek_smi *smi = ds->priv;

	/* We only support SS_STATS */
	if (sset != ETH_SS_STATS)
	return 0;
	if (port >= smi->num_ports)
	return -EINVAL;

	return smi->num_mib_counters;
	}
	EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);

	void rtl8366_get_ethtool_stats(struct dsa_switch ds, int port, uint64_t data)
	{
	struct realtek_smi *smi = ds->priv;
	int i;
	int ret;

	if (port >= smi->num_ports)
	return;

	for (i = 0; i < smi->num_mib_counters; i++) {
	struct rtl8366_mib_counter *mib;
	u64 mibvalue = 0;

	mib = &smi->mib_counters[i];
	ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue);
	if (ret) {
	dev_err(smi->dev, "error reading MIB counter %s\n",
	mib->name);
	}
	data[i] = mibvalue;
	}
	}
	EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);