drivers/net/arcnet/com20020_cs.c - SHIFTPHONES/mainline/linux - Gitiles

 /*
  * Linux ARCnet driver - COM20020 PCMCIA support
  *
  * Written 1994-1999 by Avery Pennarun,
  *    based on an ISA version by David Woodhouse.
  * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
  *    which was derived from pcnet_cs.c by David Hinds.
  * Some additional portions derived from skeleton.c by Donald Becker.
  *
  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
  *  for sponsoring the further development of this driver.
  *
  * **********************
  *
  * The original copyright of skeleton.c was as follows:
  *
  * skeleton.c Written 1993 by Donald Becker.
  * Copyright 1993 United States Government as represented by the
  * Director, National Security Agency.  This software may only be used
  * and distributed according to the terms of the GNU General Public License as
  * modified by SRC, incorporated herein by reference.
  *
  * **********************
  * Changes:
  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
  * - reorganize kmallocs in com20020_attach, checking all for failure
  *   and releasing the previous allocations if one fails
  * **********************
  *
  * For more details, see drivers/net/arcnet.c
  *
  * **********************
  */
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>

 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>

 #include <linux/io.h>

 #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"

 static void regdump(struct net_device *dev)
 {
 #ifdef DEBUG
 	int ioaddr = dev->base_addr;
 	int count;

 	netdev_dbg(dev, "register dump:\n");
 	for (count = ioaddr; count < ioaddr + 16; count++) {
 		if (!(count % 16))
 			pr_cont("%04X:", count);
 		pr_cont(" %02X", inb(count));
 	}
 	pr_cont("\n");

 	netdev_dbg(dev, "buffer0 dump:\n");
 	/* set up the address register */
 	count = 0;
 	outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
 	outb(count & 0xff, _ADDR_LO);

 	for (count = 0; count < 256 + 32; count++) {
 		if (!(count % 16))
 			pr_cont("%04X:", count);

 		/* copy the data */
 		pr_cont(" %02X", inb(_MEMDATA));
 	}
 	pr_cont("\n");
 #endif
 }

 /*====================================================================*/

 /* Parameters that can be set with 'insmod' */

 static int node;
 static int timeout = 3;
 static int backplane;
 static int clockp;
 static int clockm;

 module_param(node, int, 0);
 module_param(timeout, int, 0);
 module_param(backplane, int, 0);
 module_param(clockp, int, 0);
 module_param(clockm, int, 0);

 MODULE_LICENSE("GPL");

 /*====================================================================*/

 static int com20020_config(struct pcmcia_device *link);
 static void com20020_release(struct pcmcia_device *link);

 static void com20020_detach(struct pcmcia_device *p_dev);

 /*====================================================================*/

 static int com20020_probe(struct pcmcia_device *p_dev)
 {
 	struct com20020_dev *info;
 	struct net_device *dev;
 	struct arcnet_local *lp;

 	dev_dbg(&p_dev->dev, "com20020_attach()\n");

 	/* Create new network device */
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
 		goto fail_alloc_info;

 	dev = alloc_arcdev("");
 	if (!dev)
 		goto fail_alloc_dev;

 	lp = netdev_priv(dev);
 	lp->timeout = timeout;
 	lp->backplane = backplane;
 	lp->clockp = clockp;
 	lp->clockm = clockm & 3;
 	lp->hw.owner = THIS_MODULE;

 	/* fill in our module parameters as defaults */
 	dev->dev_addr[0] = node;

 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	p_dev->resource[0]->end = 16;
 	p_dev->config_flags |= CONF_ENABLE_IRQ;

 	info->dev = dev;
 	p_dev->priv = info;

 	return com20020_config(p_dev);

 fail_alloc_dev:
 	kfree(info);
 fail_alloc_info:
 	return -ENOMEM;
 } /* com20020_attach */

 static void com20020_detach(struct pcmcia_device *link)
 {
 	struct com20020_dev *info = link->priv;
 	struct net_device *dev = info->dev;

 	dev_dbg(&link->dev, "detach...\n");

 	dev_dbg(&link->dev, "com20020_detach\n");

 	dev_dbg(&link->dev, "unregister...\n");

 	unregister_netdev(dev);

 	/* this is necessary because we register our IRQ separately
 	 * from card services.
 	 */
 	if (dev->irq)
 		free_irq(dev->irq, dev);

 	com20020_release(link);

 	/* Unlink device structure, free bits */
 	dev_dbg(&link->dev, "unlinking...\n");
 	if (link->priv) {
 		dev = info->dev;
 		if (dev) {
 			dev_dbg(&link->dev, "kfree...\n");
 			free_netdev(dev);
 		}
 		dev_dbg(&link->dev, "kfree2...\n");
 		kfree(info);
 	}

 } /* com20020_detach */

 static int com20020_config(struct pcmcia_device *link)
 {
 	struct arcnet_local *lp;
 	struct com20020_dev *info;
 	struct net_device *dev;
 	int i, ret;
 	int ioaddr;

 	info = link->priv;
 	dev = info->dev;

 	dev_dbg(&link->dev, "config...\n");

 	dev_dbg(&link->dev, "com20020_config\n");

 	dev_dbg(&link->dev, "baseport1 is %Xh\n",
 		(unsigned int)link->resource[0]->start);

 	i = -ENODEV;
 	link->io_lines = 16;

 	if (!link->resource[0]->start) {
 		for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
 			link->resource[0]->start = ioaddr;
 			i = pcmcia_request_io(link);
 			if (i == 0)
 				break;
 		}
 	} else {
 		i = pcmcia_request_io(link);
 	}

 	if (i != 0) {
 		dev_dbg(&link->dev, "requestIO failed totally!\n");
 		goto failed;
 	}

 	ioaddr = dev->base_addr = link->resource[0]->start;
 	dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);

 	dev_dbg(&link->dev, "request IRQ %d\n",
 		link->irq);
 	if (!link->irq) {
 		dev_dbg(&link->dev, "requestIRQ failed totally!\n");
 		goto failed;
 	}

 	dev->irq = link->irq;

 	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;

 	if (com20020_check(dev)) {
 		regdump(dev);
 		goto failed;
 	}

 	lp = netdev_priv(dev);
 	lp->card_name = "PCMCIA COM20020";
 	lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */

 	SET_NETDEV_DEV(dev, &link->dev);

 	i = com20020_found(dev, 0);	/* calls register_netdev */

 	if (i != 0) {
 		dev_notice(&link->dev,
 			   "com20020_found() failed\n");
 		goto failed;
 	}

 	netdev_dbg(dev, "port %#3lx, irq %d\n",
 		   dev->base_addr, dev->irq);
 	return 0;

 failed:
 	dev_dbg(&link->dev, "com20020_config failed...\n");
 	com20020_release(link);
 	return -ENODEV;
 } /* com20020_config */

 static void com20020_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "com20020_release\n");
 	pcmcia_disable_device(link);
 }

 static int com20020_suspend(struct pcmcia_device *link)
 {
 	struct com20020_dev *info = link->priv;
 	struct net_device *dev = info->dev;

 	if (link->open)
 		netif_device_detach(dev);

 	return 0;
 }

 static int com20020_resume(struct pcmcia_device *link)
 {
 	struct com20020_dev *info = link->priv;
 	struct net_device *dev = info->dev;

 	if (link->open) {
 		int ioaddr = dev->base_addr;
 		struct arcnet_local *lp = netdev_priv(dev);

 		ARCRESET;
 	}

 	return 0;
 }

 static const struct pcmcia_device_id com20020_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
 				"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
 	PCMCIA_DEVICE_PROD_ID12("SoHard AG",
 				"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, com20020_ids);

 static struct pcmcia_driver com20020_cs_driver = {
 	.owner		= THIS_MODULE,
 	.name		= "com20020_cs",
 	.probe		= com20020_probe,
 	.remove		= com20020_detach,
 	.id_table	= com20020_ids,
 	.suspend	= com20020_suspend,
 	.resume		= com20020_resume,
 };
 module_pcmcia_driver(com20020_cs_driver);
	/*
	* Linux ARCnet driver - COM20020 PCMCIA support
	*
	* Written 1994-1999 by Avery Pennarun,
	* based on an ISA version by David Woodhouse.
	* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
	* which was derived from pcnet_cs.c by David Hinds.
	* Some additional portions derived from skeleton.c by Donald Becker.
	*
	* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
	* for sponsoring the further development of this driver.
	*
	* **********************
	*
	* The original copyright of skeleton.c was as follows:
	*
	* skeleton.c Written 1993 by Donald Becker.
	* Copyright 1993 United States Government as represented by the
	* Director, National Security Agency. This software may only be used
	* and distributed according to the terms of the GNU General Public License as
	* modified by SRC, incorporated herein by reference.
	*
	* **********************
	* Changes:
	* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
	* - reorganize kmallocs in com20020_attach, checking all for failure
	* and releasing the previous allocations if one fails
	* **********************
	*
	* For more details, see drivers/net/arcnet.c
	*
	* **********************
	*/
	#include <linux/kernel.h>
	#include <linux/ptrace.h>
	#include <linux/slab.h>
	#include <linux/string.h>
	#include <linux/timer.h>
	#include <linux/delay.h>
	#include <linux/module.h>
	#include <linux/netdevice.h>
	#include <linux/arcdevice.h>
	#include <linux/com20020.h>

	#include <pcmcia/cistpl.h>
	#include <pcmcia/ds.h>

	#include <linux/io.h>

	#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"

	static void regdump(struct net_device *dev)
	{
	#ifdef DEBUG
	int ioaddr = dev->base_addr;
	int count;

	netdev_dbg(dev, "register dump:\n");
	for (count = ioaddr; count < ioaddr + 16; count++) {
	if (!(count % 16))
	pr_cont("%04X:", count);
	pr_cont(" %02X", inb(count));
	}
	pr_cont("\n");

	netdev_dbg(dev, "buffer0 dump:\n");
	/* set up the address register */
	count = 0;
	outb((count >> 8) \| RDDATAflag \| AUTOINCflag, _ADDR_HI);
	outb(count & 0xff, _ADDR_LO);

	for (count = 0; count < 256 + 32; count++) {
	if (!(count % 16))
	pr_cont("%04X:", count);

	/* copy the data */
	pr_cont(" %02X", inb(_MEMDATA));
	}
	pr_cont("\n");
	#endif
	}

	/====================================================================/

	/* Parameters that can be set with 'insmod' */

	static int node;
	static int timeout = 3;
	static int backplane;
	static int clockp;
	static int clockm;

	module_param(node, int, 0);
	module_param(timeout, int, 0);
	module_param(backplane, int, 0);
	module_param(clockp, int, 0);
	module_param(clockm, int, 0);

	MODULE_LICENSE("GPL");

	/====================================================================/

	static int com20020_config(struct pcmcia_device *link);
	static void com20020_release(struct pcmcia_device *link);

	static void com20020_detach(struct pcmcia_device *p_dev);

	/====================================================================/

	static int com20020_probe(struct pcmcia_device *p_dev)
	{
	struct com20020_dev *info;
	struct net_device *dev;
	struct arcnet_local *lp;

	dev_dbg(&p_dev->dev, "com20020_attach()\n");

	/* Create new network device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info)
	goto fail_alloc_info;

	dev = alloc_arcdev("");
	if (!dev)
	goto fail_alloc_dev;

	lp = netdev_priv(dev);
	lp->timeout = timeout;
	lp->backplane = backplane;
	lp->clockp = clockp;
	lp->clockm = clockm & 3;
	lp->hw.owner = THIS_MODULE;

	/* fill in our module parameters as defaults */
	dev->dev_addr[0] = node;

	p_dev->resource[0]->flags \|= IO_DATA_PATH_WIDTH_8;
	p_dev->resource[0]->end = 16;
	p_dev->config_flags \|= CONF_ENABLE_IRQ;

	info->dev = dev;
	p_dev->priv = info;

	return com20020_config(p_dev);

	fail_alloc_dev:
	kfree(info);
	fail_alloc_info:
	return -ENOMEM;
	} /* com20020_attach */

	static void com20020_detach(struct pcmcia_device *link)
	{
	struct com20020_dev *info = link->priv;
	struct net_device *dev = info->dev;

	dev_dbg(&link->dev, "detach...\n");

	dev_dbg(&link->dev, "com20020_detach\n");

	dev_dbg(&link->dev, "unregister...\n");

	unregister_netdev(dev);

	/* this is necessary because we register our IRQ separately
	* from card services.
	*/
	if (dev->irq)
	free_irq(dev->irq, dev);

	com20020_release(link);

	/* Unlink device structure, free bits */
	dev_dbg(&link->dev, "unlinking...\n");
	if (link->priv) {
	dev = info->dev;
	if (dev) {
	dev_dbg(&link->dev, "kfree...\n");
	free_netdev(dev);
	}
	dev_dbg(&link->dev, "kfree2...\n");
	kfree(info);
	}

	} /* com20020_detach */

	static int com20020_config(struct pcmcia_device *link)
	{
	struct arcnet_local *lp;
	struct com20020_dev *info;
	struct net_device *dev;
	int i, ret;
	int ioaddr;

	info = link->priv;
	dev = info->dev;

	dev_dbg(&link->dev, "config...\n");

	dev_dbg(&link->dev, "com20020_config\n");

	dev_dbg(&link->dev, "baseport1 is %Xh\n",
	(unsigned int)link->resource[0]->start);

	i = -ENODEV;
	link->io_lines = 16;

	if (!link->resource[0]->start) {
	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
	link->resource[0]->start = ioaddr;
	i = pcmcia_request_io(link);
	if (i == 0)
	break;
	}
	} else {
	i = pcmcia_request_io(link);
	}

	if (i != 0) {
	dev_dbg(&link->dev, "requestIO failed totally!\n");
	goto failed;
	}

	ioaddr = dev->base_addr = link->resource[0]->start;
	dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);

	dev_dbg(&link->dev, "request IRQ %d\n",
	link->irq);
	if (!link->irq) {
	dev_dbg(&link->dev, "requestIRQ failed totally!\n");
	goto failed;
	}

	dev->irq = link->irq;

	ret = pcmcia_enable_device(link);
	if (ret)
	goto failed;

	if (com20020_check(dev)) {
	regdump(dev);
	goto failed;
	}

	lp = netdev_priv(dev);
	lp->card_name = "PCMCIA COM20020";
	lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */

	SET_NETDEV_DEV(dev, &link->dev);

	i = com20020_found(dev, 0); /* calls register_netdev */

	if (i != 0) {
	dev_notice(&link->dev,
	"com20020_found() failed\n");
	goto failed;
	}

	netdev_dbg(dev, "port %#3lx, irq %d\n",
	dev->base_addr, dev->irq);
	return 0;

	failed:
	dev_dbg(&link->dev, "com20020_config failed...\n");
	com20020_release(link);
	return -ENODEV;
	} /* com20020_config */

	static void com20020_release(struct pcmcia_device *link)
	{
	dev_dbg(&link->dev, "com20020_release\n");
	pcmcia_disable_device(link);
	}

	static int com20020_suspend(struct pcmcia_device *link)
	{
	struct com20020_dev *info = link->priv;
	struct net_device *dev = info->dev;

	if (link->open)
	netif_device_detach(dev);

	return 0;
	}

	static int com20020_resume(struct pcmcia_device *link)
	{
	struct com20020_dev *info = link->priv;
	struct net_device *dev = info->dev;

	if (link->open) {
	int ioaddr = dev->base_addr;
	struct arcnet_local *lp = netdev_priv(dev);

	ARCRESET;
	}

	return 0;
	}

	static const struct pcmcia_device_id com20020_ids[] = {
	PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
	"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
	PCMCIA_DEVICE_PROD_ID12("SoHard AG",
	"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
	PCMCIA_DEVICE_NULL
	};
	MODULE_DEVICE_TABLE(pcmcia, com20020_ids);

	static struct pcmcia_driver com20020_cs_driver = {
	.owner = THIS_MODULE,
	.name = "com20020_cs",
	.probe = com20020_probe,
	.remove = com20020_detach,
	.id_table = com20020_ids,
	.suspend = com20020_suspend,
	.resume = com20020_resume,
	};
	module_pcmcia_driver(com20020_cs_driver);