| /* |
| * Copyright (c) 2013 MundoReader S.L. |
| * Author: Heiko Stuebner <heiko@sntech.de> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/clock/rk3066a-cru.h> |
| #include "rk3xxx.dtsi" |
| |
| / { |
| compatible = "rockchip,rk3066a"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "rockchip,rk3066-smp"; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| next-level-cache = <&L2>; |
| reg = <0x0>; |
| operating-points = < |
| /* kHz uV */ |
| 1416000 1300000 |
| 1200000 1175000 |
| 1008000 1125000 |
| 816000 1125000 |
| 600000 1100000 |
| 504000 1100000 |
| 312000 1075000 |
| >; |
| clock-latency = <40000>; |
| clocks = <&cru ARMCLK>; |
| }; |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| next-level-cache = <&L2>; |
| reg = <0x1>; |
| }; |
| }; |
| |
| sram: sram@10080000 { |
| compatible = "mmio-sram"; |
| reg = <0x10080000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x10080000 0x10000>; |
| |
| smp-sram@0 { |
| compatible = "rockchip,rk3066-smp-sram"; |
| reg = <0x0 0x50>; |
| }; |
| }; |
| |
| i2s0: i2s@10118000 { |
| compatible = "rockchip,rk3066-i2s"; |
| reg = <0x10118000 0x2000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| dmas = <&dmac1_s 4>, <&dmac1_s 5>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_hclk", "i2s_clk"; |
| clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; |
| rockchip,playback-channels = <8>; |
| rockchip,capture-channels = <2>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@1011a000 { |
| compatible = "rockchip,rk3066-i2s"; |
| reg = <0x1011a000 0x2000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| dmas = <&dmac1_s 6>, <&dmac1_s 7>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_hclk", "i2s_clk"; |
| clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; |
| rockchip,playback-channels = <2>; |
| rockchip,capture-channels = <2>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@1011c000 { |
| compatible = "rockchip,rk3066-i2s"; |
| reg = <0x1011c000 0x2000>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| dmas = <&dmac1_s 9>, <&dmac1_s 10>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_hclk", "i2s_clk"; |
| clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; |
| rockchip,playback-channels = <2>; |
| rockchip,capture-channels = <2>; |
| status = "disabled"; |
| }; |
| |
| cru: clock-controller@20000000 { |
| compatible = "rockchip,rk3066a-cru"; |
| reg = <0x20000000 0x1000>; |
| rockchip,grf = <&grf>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, |
| <&cru ACLK_CPU>, <&cru HCLK_CPU>, |
| <&cru PCLK_CPU>, <&cru ACLK_PERI>, |
| <&cru HCLK_PERI>, <&cru PCLK_PERI>; |
| assigned-clock-rates = <400000000>, <594000000>, |
| <300000000>, <150000000>, |
| <75000000>, <300000000>, |
| <150000000>, <75000000>; |
| }; |
| |
| timer@2000e000 { |
| compatible = "snps,dw-apb-timer-osc"; |
| reg = <0x2000e000 0x100>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>; |
| clock-names = "timer", "pclk"; |
| }; |
| |
| efuse: efuse@20010000 { |
| compatible = "rockchip,rk3066a-efuse"; |
| reg = <0x20010000 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&cru PCLK_EFUSE>; |
| clock-names = "pclk_efuse"; |
| |
| cpu_leakage: cpu_leakage@17 { |
| reg = <0x17 0x1>; |
| }; |
| }; |
| |
| timer@20038000 { |
| compatible = "snps,dw-apb-timer-osc"; |
| reg = <0x20038000 0x100>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>; |
| clock-names = "timer", "pclk"; |
| }; |
| |
| timer@2003a000 { |
| compatible = "snps,dw-apb-timer-osc"; |
| reg = <0x2003a000 0x100>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>; |
| clock-names = "timer", "pclk"; |
| }; |
| |
| tsadc: tsadc@20060000 { |
| compatible = "rockchip,rk3066-tsadc"; |
| reg = <0x20060000 0x100>; |
| clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; |
| clock-names = "saradc", "apb_pclk"; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| #io-channel-cells = <1>; |
| resets = <&cru SRST_TSADC>; |
| reset-names = "saradc-apb"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy { |
| compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| usbphy0: usb-phy@17c { |
| #phy-cells = <0>; |
| reg = <0x17c>; |
| clocks = <&cru SCLK_OTGPHY0>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| }; |
| |
| usbphy1: usb-phy@188 { |
| #phy-cells = <0>; |
| reg = <0x188>; |
| clocks = <&cru SCLK_OTGPHY1>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3066a-pinctrl"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio0: gpio0@20034000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20034000 0x100>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio1@2003c000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2003c000 0x100>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO1>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio2@2003e000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2003e000 0x100>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO2>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio3@20080000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20080000 0x100>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO3>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio4@20084000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20084000 0x100>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO4>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio6: gpio6@2000a000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2000a000 0x100>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO6>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcfg_pull_default: pcfg_pull_default { |
| bias-pull-pin-default; |
| }; |
| |
| pcfg_pull_none: pcfg_pull_none { |
| bias-disable; |
| }; |
| |
| emac { |
| emac_xfer: emac-xfer { |
| rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ |
| <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ |
| <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ |
| <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ |
| <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ |
| <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */ |
| <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ |
| <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */ |
| }; |
| |
| emac_mdio: emac-mdio { |
| rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */ |
| <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */ |
| }; |
| }; |
| |
| emmc { |
| emmc_clk: emmc-clk { |
| rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| |
| emmc_cmd: emmc-cmd { |
| rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| |
| emmc_rst: emmc-rst { |
| rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| |
| /* |
| * The data pins are shared between nandc and emmc and |
| * not accessible through pinctrl. Also they should've |
| * been already set correctly by firmware, as |
| * flash/emmc is the boot-device. |
| */ |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, |
| <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>, |
| <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>, |
| <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c3 { |
| i2c3_xfer: i2c3-xfer { |
| rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>, |
| <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c4 { |
| i2c4_xfer: i2c4-xfer { |
| rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, |
| <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm0 { |
| pwm0_out: pwm0-out { |
| rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_out: pwm1-out { |
| rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_out: pwm2-out { |
| rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3 { |
| pwm3_out: pwm3-out { |
| rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spi0 { |
| spi0_clk: spi0-clk { |
| rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi0_cs0: spi0-cs0 { |
| rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi0_tx: spi0-tx { |
| rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi0_rx: spi0-rx { |
| rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi0_cs1: spi0-cs1 { |
| rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| spi1 { |
| spi1_clk: spi1-clk { |
| rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi1_cs0: spi1-cs0 { |
| rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi1_rx: spi1-rx { |
| rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi1_tx: spi1-tx { |
| rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| spi1_cs1: spi1-cs1 { |
| rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart1_cts: uart1-cts { |
| rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart1_rts: uart1-rts { |
| rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| uart2 { |
| uart2_xfer: uart2-xfer { |
| rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| /* no rts / cts for uart2 */ |
| }; |
| |
| uart3 { |
| uart3_xfer: uart3-xfer { |
| rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart3_cts: uart3-cts { |
| rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart3_rts: uart3-rts { |
| rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| sd0 { |
| sd0_clk: sd0-clk { |
| rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd0_cmd: sd0-cmd { |
| rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd0_cd: sd0-cd { |
| rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd0_wp: sd0-wp { |
| rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd0_bus1: sd0-bus-width1 { |
| rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd0_bus4: sd0-bus-width4 { |
| rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| sd1 { |
| sd1_clk: sd1-clk { |
| rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd1_cmd: sd1-cmd { |
| rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd1_cd: sd1-cd { |
| rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd1_wp: sd1-wp { |
| rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd1_bus1: sd1-bus-width1 { |
| rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sd1_bus4: sd1-bus-width4 { |
| rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| i2s0 { |
| i2s0_bus: i2s0-bus { |
| rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| i2s1 { |
| i2s1_bus: i2s1-bus { |
| rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| i2s2 { |
| i2s2_bus: i2s2-bus { |
| rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>, |
| <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| }; |
| }; |
| |
| &gpu { |
| compatible = "rockchip,rk3066-mali", "arm,mali-400"; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gp", |
| "gpmmu", |
| "pp0", |
| "ppmmu0", |
| "pp1", |
| "ppmmu1", |
| "pp2", |
| "ppmmu2", |
| "pp3", |
| "ppmmu3"; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_xfer>; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_xfer>; |
| }; |
| |
| &mmc0 { |
| clock-frequency = <50000000>; |
| dmas = <&dmac2 1>; |
| dma-names = "rx-tx"; |
| max-frequency = <50000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; |
| }; |
| |
| &mmc1 { |
| dmas = <&dmac2 3>; |
| dma-names = "rx-tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; |
| }; |
| |
| &emmc { |
| dmas = <&dmac2 4>; |
| dma-names = "rx-tx"; |
| }; |
| |
| &pwm0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_out>; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_out>; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_out>; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3_out>; |
| }; |
| |
| &spi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; |
| }; |
| |
| &spi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; |
| }; |
| |
| &uart0 { |
| compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; |
| dmas = <&dmac1_s 0>, <&dmac1_s 1>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer>; |
| }; |
| |
| &uart1 { |
| compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; |
| dmas = <&dmac1_s 2>, <&dmac1_s 3>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| }; |
| |
| &uart2 { |
| compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; |
| dmas = <&dmac2 6>, <&dmac2 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_xfer>; |
| }; |
| |
| &uart3 { |
| compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; |
| dmas = <&dmac2 8>, <&dmac2 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_xfer>; |
| }; |
| |
| &wdt { |
| compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; |
| }; |
| |
| &emac { |
| compatible = "rockchip,rk3066-emac"; |
| }; |