| /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ |
| /* Copyright 2014-2016 Freescale Semiconductor Inc. |
| * Copyright 2016 NXP |
| */ |
| |
| #ifndef __DPAA2_ETH_H |
| #define __DPAA2_ETH_H |
| |
| #include <linux/netdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/fsl/mc.h> |
| |
| #include <soc/fsl/dpaa2-io.h> |
| #include <soc/fsl/dpaa2-fd.h> |
| #include "dpni.h" |
| #include "dpni-cmd.h" |
| |
| #include "dpaa2-eth-trace.h" |
| #include "dpaa2-eth-debugfs.h" |
| |
| #define DPAA2_WRIOP_VERSION(x, y, z) ((x) << 10 | (y) << 5 | (z) << 0) |
| |
| #define DPAA2_ETH_STORE_SIZE 16 |
| |
| /* Maximum number of scatter-gather entries in an ingress frame, |
| * considering the maximum receive frame size is 64K |
| */ |
| #define DPAA2_ETH_MAX_SG_ENTRIES ((64 * 1024) / DPAA2_ETH_RX_BUF_SIZE) |
| |
| /* Maximum acceptable MTU value. It is in direct relation with the hardware |
| * enforced Max Frame Length (currently 10k). |
| */ |
| #define DPAA2_ETH_MFL (10 * 1024) |
| #define DPAA2_ETH_MAX_MTU (DPAA2_ETH_MFL - VLAN_ETH_HLEN) |
| /* Convert L3 MTU to L2 MFL */ |
| #define DPAA2_ETH_L2_MAX_FRM(mtu) ((mtu) + VLAN_ETH_HLEN) |
| |
| /* Set the taildrop threshold (in bytes) to allow the enqueue of several jumbo |
| * frames in the Rx queues (length of the current frame is not |
| * taken into account when making the taildrop decision) |
| */ |
| #define DPAA2_ETH_TAILDROP_THRESH (64 * 1024) |
| |
| /* Maximum number of Tx confirmation frames to be processed |
| * in a single NAPI call |
| */ |
| #define DPAA2_ETH_TXCONF_PER_NAPI 256 |
| |
| /* Buffer quota per queue. Must be large enough such that for minimum sized |
| * frames taildrop kicks in before the bpool gets depleted, so we compute |
| * how many 64B frames fit inside the taildrop threshold and add a margin |
| * to accommodate the buffer refill delay. |
| */ |
| #define DPAA2_ETH_MAX_FRAMES_PER_QUEUE (DPAA2_ETH_TAILDROP_THRESH / 64) |
| #define DPAA2_ETH_NUM_BUFS (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) |
| #define DPAA2_ETH_REFILL_THRESH \ |
| (DPAA2_ETH_NUM_BUFS - DPAA2_ETH_BUFS_PER_CMD) |
| |
| /* Maximum number of buffers that can be acquired/released through a single |
| * QBMan command |
| */ |
| #define DPAA2_ETH_BUFS_PER_CMD 7 |
| |
| /* Hardware requires alignment for ingress/egress buffer addresses */ |
| #define DPAA2_ETH_TX_BUF_ALIGN 64 |
| |
| #define DPAA2_ETH_RX_BUF_RAW_SIZE PAGE_SIZE |
| #define DPAA2_ETH_RX_BUF_TAILROOM \ |
| SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) |
| #define DPAA2_ETH_RX_BUF_SIZE \ |
| (DPAA2_ETH_RX_BUF_RAW_SIZE - DPAA2_ETH_RX_BUF_TAILROOM) |
| |
| /* Hardware annotation area in RX/TX buffers */ |
| #define DPAA2_ETH_RX_HWA_SIZE 64 |
| #define DPAA2_ETH_TX_HWA_SIZE 128 |
| |
| /* PTP nominal frequency 1GHz */ |
| #define DPAA2_PTP_CLK_PERIOD_NS 1 |
| |
| /* Due to a limitation in WRIOP 1.0.0, the RX buffer data must be aligned |
| * to 256B. For newer revisions, the requirement is only for 64B alignment |
| */ |
| #define DPAA2_ETH_RX_BUF_ALIGN_REV1 256 |
| #define DPAA2_ETH_RX_BUF_ALIGN 64 |
| |
| /* We are accommodating a skb backpointer and some S/G info |
| * in the frame's software annotation. The hardware |
| * options are either 0 or 64, so we choose the latter. |
| */ |
| #define DPAA2_ETH_SWA_SIZE 64 |
| |
| /* We store different information in the software annotation area of a Tx frame |
| * based on what type of frame it is |
| */ |
| enum dpaa2_eth_swa_type { |
| DPAA2_ETH_SWA_SINGLE, |
| DPAA2_ETH_SWA_SG, |
| }; |
| |
| /* Must keep this struct smaller than DPAA2_ETH_SWA_SIZE */ |
| struct dpaa2_eth_swa { |
| enum dpaa2_eth_swa_type type; |
| union { |
| struct { |
| struct sk_buff *skb; |
| } single; |
| struct { |
| struct sk_buff *skb; |
| struct scatterlist *scl; |
| int num_sg; |
| int sgt_size; |
| } sg; |
| }; |
| }; |
| |
| /* Annotation valid bits in FD FRC */ |
| #define DPAA2_FD_FRC_FASV 0x8000 |
| #define DPAA2_FD_FRC_FAEADV 0x4000 |
| #define DPAA2_FD_FRC_FAPRV 0x2000 |
| #define DPAA2_FD_FRC_FAIADV 0x1000 |
| #define DPAA2_FD_FRC_FASWOV 0x0800 |
| #define DPAA2_FD_FRC_FAICFDV 0x0400 |
| |
| /* Error bits in FD CTRL */ |
| #define DPAA2_FD_RX_ERR_MASK (FD_CTRL_SBE | FD_CTRL_FAERR) |
| #define DPAA2_FD_TX_ERR_MASK (FD_CTRL_UFD | \ |
| FD_CTRL_SBE | \ |
| FD_CTRL_FSE | \ |
| FD_CTRL_FAERR) |
| |
| /* Annotation bits in FD CTRL */ |
| #define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128B */ |
| |
| /* Frame annotation status */ |
| struct dpaa2_fas { |
| u8 reserved; |
| u8 ppid; |
| __le16 ifpid; |
| __le32 status; |
| }; |
| |
| /* Frame annotation status word is located in the first 8 bytes |
| * of the buffer's hardware annoatation area |
| */ |
| #define DPAA2_FAS_OFFSET 0 |
| #define DPAA2_FAS_SIZE (sizeof(struct dpaa2_fas)) |
| |
| /* Timestamp is located in the next 8 bytes of the buffer's |
| * hardware annotation area |
| */ |
| #define DPAA2_TS_OFFSET 0x8 |
| |
| /* Frame annotation egress action descriptor */ |
| #define DPAA2_FAEAD_OFFSET 0x58 |
| |
| struct dpaa2_faead { |
| __le32 conf_fqid; |
| __le32 ctrl; |
| }; |
| |
| #define DPAA2_FAEAD_A2V 0x20000000 |
| #define DPAA2_FAEAD_A4V 0x08000000 |
| #define DPAA2_FAEAD_UPDV 0x00001000 |
| #define DPAA2_FAEAD_EBDDV 0x00002000 |
| #define DPAA2_FAEAD_UPD 0x00000010 |
| |
| /* Accessors for the hardware annotation fields that we use */ |
| static inline void *dpaa2_get_hwa(void *buf_addr, bool swa) |
| { |
| return buf_addr + (swa ? DPAA2_ETH_SWA_SIZE : 0); |
| } |
| |
| static inline struct dpaa2_fas *dpaa2_get_fas(void *buf_addr, bool swa) |
| { |
| return dpaa2_get_hwa(buf_addr, swa) + DPAA2_FAS_OFFSET; |
| } |
| |
| static inline __le64 *dpaa2_get_ts(void *buf_addr, bool swa) |
| { |
| return dpaa2_get_hwa(buf_addr, swa) + DPAA2_TS_OFFSET; |
| } |
| |
| static inline struct dpaa2_faead *dpaa2_get_faead(void *buf_addr, bool swa) |
| { |
| return dpaa2_get_hwa(buf_addr, swa) + DPAA2_FAEAD_OFFSET; |
| } |
| |
| /* Error and status bits in the frame annotation status word */ |
| /* Debug frame, otherwise supposed to be discarded */ |
| #define DPAA2_FAS_DISC 0x80000000 |
| /* MACSEC frame */ |
| #define DPAA2_FAS_MS 0x40000000 |
| #define DPAA2_FAS_PTP 0x08000000 |
| /* Ethernet multicast frame */ |
| #define DPAA2_FAS_MC 0x04000000 |
| /* Ethernet broadcast frame */ |
| #define DPAA2_FAS_BC 0x02000000 |
| #define DPAA2_FAS_KSE 0x00040000 |
| #define DPAA2_FAS_EOFHE 0x00020000 |
| #define DPAA2_FAS_MNLE 0x00010000 |
| #define DPAA2_FAS_TIDE 0x00008000 |
| #define DPAA2_FAS_PIEE 0x00004000 |
| /* Frame length error */ |
| #define DPAA2_FAS_FLE 0x00002000 |
| /* Frame physical error */ |
| #define DPAA2_FAS_FPE 0x00001000 |
| #define DPAA2_FAS_PTE 0x00000080 |
| #define DPAA2_FAS_ISP 0x00000040 |
| #define DPAA2_FAS_PHE 0x00000020 |
| #define DPAA2_FAS_BLE 0x00000010 |
| /* L3 csum validation performed */ |
| #define DPAA2_FAS_L3CV 0x00000008 |
| /* L3 csum error */ |
| #define DPAA2_FAS_L3CE 0x00000004 |
| /* L4 csum validation performed */ |
| #define DPAA2_FAS_L4CV 0x00000002 |
| /* L4 csum error */ |
| #define DPAA2_FAS_L4CE 0x00000001 |
| /* Possible errors on the ingress path */ |
| #define DPAA2_FAS_RX_ERR_MASK (DPAA2_FAS_KSE | \ |
| DPAA2_FAS_EOFHE | \ |
| DPAA2_FAS_MNLE | \ |
| DPAA2_FAS_TIDE | \ |
| DPAA2_FAS_PIEE | \ |
| DPAA2_FAS_FLE | \ |
| DPAA2_FAS_FPE | \ |
| DPAA2_FAS_PTE | \ |
| DPAA2_FAS_ISP | \ |
| DPAA2_FAS_PHE | \ |
| DPAA2_FAS_BLE | \ |
| DPAA2_FAS_L3CE | \ |
| DPAA2_FAS_L4CE) |
| |
| /* Time in milliseconds between link state updates */ |
| #define DPAA2_ETH_LINK_STATE_REFRESH 1000 |
| |
| /* Number of times to retry a frame enqueue before giving up. |
| * Value determined empirically, in order to minimize the number |
| * of frames dropped on Tx |
| */ |
| #define DPAA2_ETH_ENQUEUE_RETRIES 10 |
| |
| /* Driver statistics, other than those in struct rtnl_link_stats64. |
| * These are usually collected per-CPU and aggregated by ethtool. |
| */ |
| struct dpaa2_eth_drv_stats { |
| __u64 tx_conf_frames; |
| __u64 tx_conf_bytes; |
| __u64 tx_sg_frames; |
| __u64 tx_sg_bytes; |
| __u64 tx_reallocs; |
| __u64 rx_sg_frames; |
| __u64 rx_sg_bytes; |
| /* Enqueues retried due to portal busy */ |
| __u64 tx_portal_busy; |
| }; |
| |
| /* Per-FQ statistics */ |
| struct dpaa2_eth_fq_stats { |
| /* Number of frames received on this queue */ |
| __u64 frames; |
| }; |
| |
| /* Per-channel statistics */ |
| struct dpaa2_eth_ch_stats { |
| /* Volatile dequeues retried due to portal busy */ |
| __u64 dequeue_portal_busy; |
| /* Pull errors */ |
| __u64 pull_err; |
| /* Number of CDANs; useful to estimate avg NAPI len */ |
| __u64 cdan; |
| /* XDP counters */ |
| __u64 xdp_drop; |
| __u64 xdp_tx; |
| __u64 xdp_tx_err; |
| }; |
| |
| /* Maximum number of queues associated with a DPNI */ |
| #define DPAA2_ETH_MAX_RX_QUEUES 16 |
| #define DPAA2_ETH_MAX_TX_QUEUES 16 |
| #define DPAA2_ETH_MAX_QUEUES (DPAA2_ETH_MAX_RX_QUEUES + \ |
| DPAA2_ETH_MAX_TX_QUEUES) |
| |
| #define DPAA2_ETH_MAX_DPCONS 16 |
| |
| enum dpaa2_eth_fq_type { |
| DPAA2_RX_FQ = 0, |
| DPAA2_TX_CONF_FQ, |
| }; |
| |
| struct dpaa2_eth_priv; |
| |
| struct dpaa2_eth_fq { |
| u32 fqid; |
| u32 tx_qdbin; |
| u32 tx_fqid; |
| u16 flowid; |
| int target_cpu; |
| u32 dq_frames; |
| u32 dq_bytes; |
| struct dpaa2_eth_channel *channel; |
| enum dpaa2_eth_fq_type type; |
| |
| void (*consume)(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, |
| const struct dpaa2_fd *fd, |
| struct dpaa2_eth_fq *fq); |
| struct dpaa2_eth_fq_stats stats; |
| }; |
| |
| struct dpaa2_eth_ch_xdp { |
| struct bpf_prog *prog; |
| u64 drop_bufs[DPAA2_ETH_BUFS_PER_CMD]; |
| int drop_cnt; |
| }; |
| |
| struct dpaa2_eth_channel { |
| struct dpaa2_io_notification_ctx nctx; |
| struct fsl_mc_device *dpcon; |
| int dpcon_id; |
| int ch_id; |
| struct napi_struct napi; |
| struct dpaa2_io *dpio; |
| struct dpaa2_io_store *store; |
| struct dpaa2_eth_priv *priv; |
| int buf_count; |
| struct dpaa2_eth_ch_stats stats; |
| struct dpaa2_eth_ch_xdp xdp; |
| }; |
| |
| struct dpaa2_eth_dist_fields { |
| u64 rxnfc_field; |
| enum net_prot cls_prot; |
| int cls_field; |
| int size; |
| }; |
| |
| struct dpaa2_eth_cls_rule { |
| struct ethtool_rx_flow_spec fs; |
| u8 in_use; |
| }; |
| |
| /* Driver private data */ |
| struct dpaa2_eth_priv { |
| struct net_device *net_dev; |
| |
| u8 num_fqs; |
| struct dpaa2_eth_fq fq[DPAA2_ETH_MAX_QUEUES]; |
| int (*enqueue)(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_fq *fq, |
| struct dpaa2_fd *fd, u8 prio); |
| |
| u8 num_channels; |
| struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS]; |
| |
| struct dpni_attr dpni_attrs; |
| u16 dpni_ver_major; |
| u16 dpni_ver_minor; |
| u16 tx_data_offset; |
| |
| struct fsl_mc_device *dpbp_dev; |
| u16 bpid; |
| struct iommu_domain *iommu_domain; |
| |
| bool tx_tstamp; /* Tx timestamping enabled */ |
| bool rx_tstamp; /* Rx timestamping enabled */ |
| |
| u16 tx_qdid; |
| struct fsl_mc_io *mc_io; |
| /* Cores which have an affine DPIO/DPCON. |
| * This is the cpu set on which Rx and Tx conf frames are processed |
| */ |
| struct cpumask dpio_cpumask; |
| |
| /* Standard statistics */ |
| struct rtnl_link_stats64 __percpu *percpu_stats; |
| /* Extra stats, in addition to the ones known by the kernel */ |
| struct dpaa2_eth_drv_stats __percpu *percpu_extras; |
| |
| u16 mc_token; |
| |
| struct dpni_link_state link_state; |
| bool do_link_poll; |
| struct task_struct *poll_thread; |
| |
| /* enabled ethtool hashing bits */ |
| u64 rx_hash_fields; |
| struct dpaa2_eth_cls_rule *cls_rules; |
| u8 rx_cls_enabled; |
| struct bpf_prog *xdp_prog; |
| #ifdef CONFIG_DEBUG_FS |
| struct dpaa2_debugfs dbg; |
| #endif |
| }; |
| |
| #define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ |
| | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \ |
| | RXH_L4_B_2_3) |
| |
| /* default Rx hash options, set during probing */ |
| #define DPAA2_RXH_DEFAULT (RXH_L3_PROTO | RXH_IP_SRC | RXH_IP_DST | \ |
| RXH_L4_B_0_1 | RXH_L4_B_2_3) |
| |
| #define dpaa2_eth_hash_enabled(priv) \ |
| ((priv)->dpni_attrs.num_queues > 1) |
| |
| /* Required by struct dpni_rx_tc_dist_cfg::key_cfg_iova */ |
| #define DPAA2_CLASSIFIER_DMA_SIZE 256 |
| |
| extern const struct ethtool_ops dpaa2_ethtool_ops; |
| extern int dpaa2_phc_index; |
| |
| static inline int dpaa2_eth_cmp_dpni_ver(struct dpaa2_eth_priv *priv, |
| u16 ver_major, u16 ver_minor) |
| { |
| if (priv->dpni_ver_major == ver_major) |
| return priv->dpni_ver_minor - ver_minor; |
| return priv->dpni_ver_major - ver_major; |
| } |
| |
| /* Minimum firmware version that supports a more flexible API |
| * for configuring the Rx flow hash key |
| */ |
| #define DPNI_RX_DIST_KEY_VER_MAJOR 7 |
| #define DPNI_RX_DIST_KEY_VER_MINOR 5 |
| |
| #define dpaa2_eth_has_legacy_dist(priv) \ |
| (dpaa2_eth_cmp_dpni_ver((priv), DPNI_RX_DIST_KEY_VER_MAJOR, \ |
| DPNI_RX_DIST_KEY_VER_MINOR) < 0) |
| |
| #define dpaa2_eth_fs_count(priv) \ |
| ((priv)->dpni_attrs.fs_entries) |
| |
| /* We have exactly one {Rx, Tx conf} queue per channel */ |
| #define dpaa2_eth_queue_count(priv) \ |
| ((priv)->num_channels) |
| |
| enum dpaa2_eth_rx_dist { |
| DPAA2_ETH_RX_DIST_HASH, |
| DPAA2_ETH_RX_DIST_CLS |
| }; |
| |
| static inline |
| unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv, |
| struct sk_buff *skb) |
| { |
| unsigned int headroom = DPAA2_ETH_SWA_SIZE; |
| |
| /* For non-linear skbs we have no headroom requirement, as we build a |
| * SG frame with a newly allocated SGT buffer |
| */ |
| if (skb_is_nonlinear(skb)) |
| return 0; |
| |
| /* If we have Tx timestamping, need 128B hardware annotation */ |
| if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) |
| headroom += DPAA2_ETH_TX_HWA_SIZE; |
| |
| return headroom; |
| } |
| |
| /* Extra headroom space requested to hardware, in order to make sure there's |
| * no realloc'ing in forwarding scenarios |
| */ |
| static inline unsigned int dpaa2_eth_rx_head_room(struct dpaa2_eth_priv *priv) |
| { |
| return priv->tx_data_offset - DPAA2_ETH_RX_HWA_SIZE; |
| } |
| |
| int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags); |
| int dpaa2_eth_cls_key_size(void); |
| int dpaa2_eth_cls_fld_off(int prot, int field); |
| |
| #endif /* __DPAA2_H */ |