drivers/edac/i82443bxgx_edac.c - SHIFTPHONES/mainline/linux - Gitiles

 /*
  * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
  * module (C) 2006 Tim Small
  *
  * This file may be distributed under the terms of the GNU General
  * Public License.
  *
  * Written by Tim Small <tim@buttersideup.com>, based on work by Linux
  * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
  * others.
  *
  * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
  *
  * Written with reference to 82443BX Host Bridge Datasheet:
  * http://download.intel.com/design/chipsets/datashts/29063301.pdf
  * references to this document given in [].
  *
  * This module doesn't support the 440LX, but it may be possible to
  * make it do so (the 440LX's register definitions are different, but
  * not completely so - I haven't studied them in enough detail to know
  * how easy this would be).
  */

 #include <linux/module.h>
 #include <linux/init.h>

 #include <linux/pci.h>
 #include <linux/pci_ids.h>


 #include <linux/edac.h>
 #include "edac_core.h"

 #define I82443_REVISION	"0.1"

 #define EDAC_MOD_STR    "i82443bxgx_edac"

 /* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
  * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
  * rows" "The 82443BX supports multiple-bit error detection and
  * single-bit error correction when ECC mode is enabled and
  * single/multi-bit error detection when correction is disabled.
  * During writes to the DRAM, the 82443BX generates ECC for the data
  * on a QWord basis. Partial QWord writes require a read-modify-write
  * cycle when ECC is enabled."
 */

 /* "Additionally, the 82443BX ensures that the data is corrected in
  * main memory so that accumulation of errors is prevented. Another
  * error within the same QWord would result in a double-bit error
  * which is unrecoverable. This is known as hardware scrubbing since
  * it requires no software intervention to correct the data in memory."
  */

 /* [Also see page 100 (section 4.3), "DRAM Interface"]
  * [Also see page 112 (section 4.6.1.4), ECC]
  */

 #define I82443BXGX_NR_CSROWS 8
 #define I82443BXGX_NR_CHANS  1
 #define I82443BXGX_NR_DIMMS  4

 /* 82443 PCI Device 0 */
 #define I82443BXGX_NBXCFG 0x50	/* 32bit register starting at this PCI
 				 * config space offset */
 #define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24	/* Array of bits, zero if
 						 * row is non-ECC */
 #define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12	/* 2 bits,00=100MHz,10=66 MHz */

 #define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7	/* 2 bits:       */
 #define I82443BXGX_NBXCFG_INTEGRITY_NONE   0x0	/* 00 = Non-ECC */
 #define I82443BXGX_NBXCFG_INTEGRITY_EC     0x1	/* 01 = EC (only) */
 #define I82443BXGX_NBXCFG_INTEGRITY_ECC    0x2	/* 10 = ECC */
 #define I82443BXGX_NBXCFG_INTEGRITY_SCRUB  0x3	/* 11 = ECC + HW Scrub */

 #define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE  6

 /* 82443 PCI Device 0 */
 #define I82443BXGX_EAP   0x80	/* 32bit register starting at this PCI
 				 * config space offset, Error Address
 				 * Pointer Register */
 #define I82443BXGX_EAP_OFFSET_EAP  12	/* High 20 bits of error address */
 #define I82443BXGX_EAP_OFFSET_MBE  BIT(1)	/* Err at EAP was multi-bit (W1TC) */
 #define I82443BXGX_EAP_OFFSET_SBE  BIT(0)	/* Err at EAP was single-bit (W1TC) */

 #define I82443BXGX_ERRCMD  0x90	/* 8bit register starting at this PCI
 				 * config space offset. */
 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1)	/* 1 = enable */
 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0)	/* 1 = enable */

 #define I82443BXGX_ERRSTS  0x91	/* 16bit register starting at this PCI
 				 * config space offset. */
 #define I82443BXGX_ERRSTS_OFFSET_MBFRE 5	/* 3 bits - first err row multibit */
 #define I82443BXGX_ERRSTS_OFFSET_MEF   BIT(4)	/* 1 = MBE occurred */
 #define I82443BXGX_ERRSTS_OFFSET_SBFRE 1	/* 3 bits - first err row singlebit */
 #define I82443BXGX_ERRSTS_OFFSET_SEF   BIT(0)	/* 1 = SBE occurred */

 #define I82443BXGX_DRAMC 0x57	/* 8bit register starting at this PCI
 				 * config space offset. */
 #define I82443BXGX_DRAMC_OFFSET_DT 3	/* 2 bits, DRAM Type */
 #define I82443BXGX_DRAMC_DRAM_IS_EDO 0	/* 00 = EDO */
 #define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1	/* 01 = SDRAM */
 #define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2	/* 10 = Registered SDRAM */

 #define I82443BXGX_DRB 0x60	/* 8x 8bit registers starting at this PCI
 				 * config space offset. */

 /* FIXME - don't poll when ECC disabled? */

 struct i82443bxgx_edacmc_error_info {
 	u32 eap;
 };

 static struct edac_pci_ctl_info *i82443bxgx_pci;

 static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
 					 * already registered driver
 					 */

 static int i82443bxgx_registered = 1;

 static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
 				struct i82443bxgx_edacmc_error_info
 				*info)
 {
 	struct pci_dev *pdev;
 	pdev = to_pci_dev(mci->pdev);
 	pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
 	if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
 		/* Clear error to allow next error to be reported [p.61] */
 		pci_write_bits32(pdev, I82443BXGX_EAP,
 				 I82443BXGX_EAP_OFFSET_SBE,
 				 I82443BXGX_EAP_OFFSET_SBE);

 	if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
 		/* Clear error to allow next error to be reported [p.61] */
 		pci_write_bits32(pdev, I82443BXGX_EAP,
 				 I82443BXGX_EAP_OFFSET_MBE,
 				 I82443BXGX_EAP_OFFSET_MBE);
 }

 static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
 						struct
 						i82443bxgx_edacmc_error_info
 						*info, int handle_errors)
 {
 	int error_found = 0;
 	u32 eapaddr, page, pageoffset;

 	/* bits 30:12 hold the 4kb block in which the error occurred
 	 * [p.61] */
 	eapaddr = (info->eap & 0xfffff000);
 	page = eapaddr >> PAGE_SHIFT;
 	pageoffset = eapaddr - (page << PAGE_SHIFT);

 	if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
 		error_found = 1;
 		if (handle_errors)
 			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
 					     page, pageoffset, 0,
 					     edac_mc_find_csrow_by_page(mci, page),
 					     0, -1, mci->ctl_name, "", NULL);
 	}

 	if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
 		error_found = 1;
 		if (handle_errors)
 			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
 					     page, pageoffset, 0,
 					     edac_mc_find_csrow_by_page(mci, page),
 					     0, -1, mci->ctl_name, "", NULL);
 	}

 	return error_found;
 }

 static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
 {
 	struct i82443bxgx_edacmc_error_info info;

 	debugf1("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
 	i82443bxgx_edacmc_get_error_info(mci, &info);
 	i82443bxgx_edacmc_process_error_info(mci, &info, 1);
 }

 static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
 				struct pci_dev *pdev,
 				enum edac_type edac_mode,
 				enum mem_type mtype)
 {
 	struct csrow_info *csrow;
 	struct dimm_info *dimm;
 	int index;
 	u8 drbar, dramc;
 	u32 row_base, row_high_limit, row_high_limit_last;

 	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
 	row_high_limit_last = 0;
 	for (index = 0; index < mci->nr_csrows; index++) {
 		csrow = mci->csrows[index];
 		dimm = csrow->channels[0]->dimm;

 		pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
 		debugf1("MC%d: %s: %s() Row=%d DRB = %#0x\n",
 			mci->mc_idx, __FILE__, __func__, index, drbar);
 		row_high_limit = ((u32) drbar << 23);
 		/* find the DRAM Chip Select Base address and mask */
 		debugf1("MC%d: %s: %s() Row=%d, "
 			"Boundary Address=%#0x, Last = %#0x\n",
 			mci->mc_idx, __FILE__, __func__, index, row_high_limit,
 			row_high_limit_last);

 		/* 440GX goes to 2GB, represented with a DRB of 0. */
 		if (row_high_limit_last && !row_high_limit)
 			row_high_limit = 1UL << 31;

 		/* This row is empty [p.49] */
 		if (row_high_limit == row_high_limit_last)
 			continue;
 		row_base = row_high_limit_last;
 		csrow->first_page = row_base >> PAGE_SHIFT;
 		csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
 		dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
 		/* EAP reports in 4kilobyte granularity [61] */
 		dimm->grain = 1 << 12;
 		dimm->mtype = mtype;
 		/* I don't think 440BX can tell you device type? FIXME? */
 		dimm->dtype = DEV_UNKNOWN;
 		/* Mode is global to all rows on 440BX */
 		dimm->edac_mode = edac_mode;
 		row_high_limit_last = row_high_limit;
 	}
 }

 static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
 {
 	struct mem_ctl_info *mci;
 	struct edac_mc_layer layers[2];
 	u8 dramc;
 	u32 nbxcfg, ecc_mode;
 	enum mem_type mtype;
 	enum edac_type edac_mode;

 	debugf0("MC: %s: %s()\n", __FILE__, __func__);

 	/* Something is really hosed if PCI config space reads from
 	 * the MC aren't working.
 	 */
 	if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
 		return -EIO;

 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
 	layers[0].size = I82443BXGX_NR_CSROWS;
 	layers[0].is_virt_csrow = true;
 	layers[1].type = EDAC_MC_LAYER_CHANNEL;
 	layers[1].size = I82443BXGX_NR_CHANS;
 	layers[1].is_virt_csrow = false;
 	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
 	if (mci == NULL)
 		return -ENOMEM;

 	debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
 	mci->pdev = &pdev->dev;
 	mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
 	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
 	switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) {
 	case I82443BXGX_DRAMC_DRAM_IS_EDO:
 		mtype = MEM_EDO;
 		break;
 	case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
 		mtype = MEM_SDR;
 		break;
 	case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
 		mtype = MEM_RDR;
 		break;
 	default:
 		debugf0("Unknown/reserved DRAM type value "
 			"in DRAMC register!\n");
 		mtype = -MEM_UNKNOWN;
 	}

 	if ((mtype == MEM_SDR) || (mtype == MEM_RDR))
 		mci->edac_cap = mci->edac_ctl_cap;
 	else
 		mci->edac_cap = EDAC_FLAG_NONE;

 	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
 	pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
 	ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
 		(BIT(0) | BIT(1)));

 	mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
 		? SCRUB_HW_SRC : SCRUB_NONE;

 	switch (ecc_mode) {
 	case I82443BXGX_NBXCFG_INTEGRITY_NONE:
 		edac_mode = EDAC_NONE;
 		break;
 	case I82443BXGX_NBXCFG_INTEGRITY_EC:
 		edac_mode = EDAC_EC;
 		break;
 	case I82443BXGX_NBXCFG_INTEGRITY_ECC:
 	case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
 		edac_mode = EDAC_SECDED;
 		break;
 	default:
 		debugf0("%s(): Unknown/reserved ECC state "
 			"in NBXCFG register!\n", __func__);
 		edac_mode = EDAC_UNKNOWN;
 		break;
 	}

 	i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);

 	/* Many BIOSes don't clear error flags on boot, so do this
 	 * here, or we get "phantom" errors occurring at module-load
 	 * time. */
 	pci_write_bits32(pdev, I82443BXGX_EAP,
 			(I82443BXGX_EAP_OFFSET_SBE |
 				I82443BXGX_EAP_OFFSET_MBE),
 			(I82443BXGX_EAP_OFFSET_SBE |
 				I82443BXGX_EAP_OFFSET_MBE));

 	mci->mod_name = EDAC_MOD_STR;
 	mci->mod_ver = I82443_REVISION;
 	mci->ctl_name = "I82443BXGX";
 	mci->dev_name = pci_name(pdev);
 	mci->edac_check = i82443bxgx_edacmc_check;
 	mci->ctl_page_to_phys = NULL;

 	if (edac_mc_add_mc(mci)) {
 		debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
 		goto fail;
 	}

 	/* allocating generic PCI control info */
 	i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
 	if (!i82443bxgx_pci) {
 		printk(KERN_WARNING
 			"%s(): Unable to create PCI control\n",
 			__func__);
 		printk(KERN_WARNING
 			"%s(): PCI error report via EDAC not setup\n",
 			__func__);
 	}

 	debugf3("MC: %s: %s(): success\n", __FILE__, __func__);
 	return 0;

 fail:
 	edac_mc_free(mci);
 	return -ENODEV;
 }

 EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_probe1);

 /* returns count (>= 0), or negative on error */
 static int __devinit i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
 						const struct pci_device_id *ent)
 {
 	int rc;

 	debugf0("MC: %s: %s()\n", __FILE__, __func__);

 	/* don't need to call pci_enable_device() */
 	rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);

 	if (mci_pdev == NULL)
 		mci_pdev = pci_dev_get(pdev);

 	return rc;
 }

 static void __devexit i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
 {
 	struct mem_ctl_info *mci;

 	debugf0("%s: %s()\n", __FILE__, __func__);

 	if (i82443bxgx_pci)
 		edac_pci_release_generic_ctl(i82443bxgx_pci);

 	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
 		return;

 	edac_mc_free(mci);
 }

 EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_remove_one);

 static DEFINE_PCI_DEVICE_TABLE(i82443bxgx_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
 	{0,}			/* 0 terminated list. */
 };

 MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);

 static struct pci_driver i82443bxgx_edacmc_driver = {
 	.name = EDAC_MOD_STR,
 	.probe = i82443bxgx_edacmc_init_one,
 	.remove = __devexit_p(i82443bxgx_edacmc_remove_one),
 	.id_table = i82443bxgx_pci_tbl,
 };

 static int __init i82443bxgx_edacmc_init(void)
 {
 	int pci_rc;
        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
        opstate_init();

 	pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
 	if (pci_rc < 0)
 		goto fail0;

 	if (mci_pdev == NULL) {
 		const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
 		int i = 0;
 		i82443bxgx_registered = 0;

 		while (mci_pdev == NULL && id->vendor != 0) {
 			mci_pdev = pci_get_device(id->vendor,
 					id->device, NULL);
 			i++;
 			id = &i82443bxgx_pci_tbl[i];
 		}
 		if (!mci_pdev) {
 			debugf0("i82443bxgx pci_get_device fail\n");
 			pci_rc = -ENODEV;
 			goto fail1;
 		}

 		pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);

 		if (pci_rc < 0) {
 			debugf0("i82443bxgx init fail\n");
 			pci_rc = -ENODEV;
 			goto fail1;
 		}
 	}

 	return 0;

 fail1:
 	pci_unregister_driver(&i82443bxgx_edacmc_driver);

 fail0:
 	if (mci_pdev != NULL)
 		pci_dev_put(mci_pdev);

 	return pci_rc;
 }

 static void __exit i82443bxgx_edacmc_exit(void)
 {
 	pci_unregister_driver(&i82443bxgx_edacmc_driver);

 	if (!i82443bxgx_registered)
 		i82443bxgx_edacmc_remove_one(mci_pdev);

 	if (mci_pdev)
 		pci_dev_put(mci_pdev);
 }

 module_init(i82443bxgx_edacmc_init);
 module_exit(i82443bxgx_edacmc_exit);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
 MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");

 module_param(edac_op_state, int, 0444);
 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
	/*
	* Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
	* module (C) 2006 Tim Small
	*
	* This file may be distributed under the terms of the GNU General
	* Public License.
	*
	* Written by Tim Small <tim@buttersideup.com>, based on work by Linux
	* Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
	* others.
	*
	* 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
	*
	* Written with reference to 82443BX Host Bridge Datasheet:
	* http://download.intel.com/design/chipsets/datashts/29063301.pdf
	* references to this document given in [].
	*
	* This module doesn't support the 440LX, but it may be possible to
	* make it do so (the 440LX's register definitions are different, but
	* not completely so - I haven't studied them in enough detail to know
	* how easy this would be).
	*/

	#include <linux/module.h>
	#include <linux/init.h>

	#include <linux/pci.h>
	#include <linux/pci_ids.h>


	#include <linux/edac.h>
	#include "edac_core.h"

	#define I82443_REVISION "0.1"

	#define EDAC_MOD_STR "i82443bxgx_edac"

	/* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
	* Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
	* rows" "The 82443BX supports multiple-bit error detection and
	* single-bit error correction when ECC mode is enabled and
	* single/multi-bit error detection when correction is disabled.
	* During writes to the DRAM, the 82443BX generates ECC for the data
	* on a QWord basis. Partial QWord writes require a read-modify-write
	* cycle when ECC is enabled."
	*/

	/* "Additionally, the 82443BX ensures that the data is corrected in
	* main memory so that accumulation of errors is prevented. Another
	* error within the same QWord would result in a double-bit error
	* which is unrecoverable. This is known as hardware scrubbing since
	* it requires no software intervention to correct the data in memory."
	*/

	/* [Also see page 100 (section 4.3), "DRAM Interface"]
	* [Also see page 112 (section 4.6.1.4), ECC]
	*/

	#define I82443BXGX_NR_CSROWS 8
	#define I82443BXGX_NR_CHANS 1
	#define I82443BXGX_NR_DIMMS 4

	/* 82443 PCI Device 0 */
	#define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI
	* config space offset */
	#define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if
	* row is non-ECC */
	#define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */

	#define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */
	#define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */
	#define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */
	#define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */
	#define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */

	#define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6

	/* 82443 PCI Device 0 */
	#define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI
	* config space offset, Error Address
	* Pointer Register */
	#define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */
	#define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */
	#define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC) */

	#define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI
	* config space offset. */
	#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */
	#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */

	#define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI
	* config space offset. */
	#define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */
	#define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */
	#define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */
	#define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */

	#define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI
	* config space offset. */
	#define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */
	#define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */
	#define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */
	#define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */

	#define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI
	* config space offset. */

	/* FIXME - don't poll when ECC disabled? */

	struct i82443bxgx_edacmc_error_info {
	u32 eap;
	};

	static struct edac_pci_ctl_info *i82443bxgx_pci;

	static struct pci_dev mci_pdev; / init dev: in case that AGP code has
	* already registered driver
	*/

	static int i82443bxgx_registered = 1;

	static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
	struct i82443bxgx_edacmc_error_info
	*info)
	{
	struct pci_dev *pdev;
	pdev = to_pci_dev(mci->pdev);
	pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
	if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
	/* Clear error to allow next error to be reported [p.61] */
	pci_write_bits32(pdev, I82443BXGX_EAP,
	I82443BXGX_EAP_OFFSET_SBE,
	I82443BXGX_EAP_OFFSET_SBE);

	if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
	/* Clear error to allow next error to be reported [p.61] */
	pci_write_bits32(pdev, I82443BXGX_EAP,
	I82443BXGX_EAP_OFFSET_MBE,
	I82443BXGX_EAP_OFFSET_MBE);
	}

	static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
	struct
	i82443bxgx_edacmc_error_info
	*info, int handle_errors)
	{
	int error_found = 0;
	u32 eapaddr, page, pageoffset;

	/* bits 30:12 hold the 4kb block in which the error occurred
	* [p.61] */
	eapaddr = (info->eap & 0xfffff000);
	page = eapaddr >> PAGE_SHIFT;
	pageoffset = eapaddr - (page << PAGE_SHIFT);

	if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
	error_found = 1;
	if (handle_errors)
	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
	page, pageoffset, 0,
	edac_mc_find_csrow_by_page(mci, page),
	0, -1, mci->ctl_name, "", NULL);
	}

	if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
	error_found = 1;
	if (handle_errors)
	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
	page, pageoffset, 0,
	edac_mc_find_csrow_by_page(mci, page),
	0, -1, mci->ctl_name, "", NULL);
	}

	return error_found;
	}

	static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
	{
	struct i82443bxgx_edacmc_error_info info;

	debugf1("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
	i82443bxgx_edacmc_get_error_info(mci, &info);
	i82443bxgx_edacmc_process_error_info(mci, &info, 1);
	}

	static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
	struct pci_dev *pdev,
	enum edac_type edac_mode,
	enum mem_type mtype)
	{
	struct csrow_info *csrow;
	struct dimm_info *dimm;
	int index;
	u8 drbar, dramc;
	u32 row_base, row_high_limit, row_high_limit_last;

	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
	row_high_limit_last = 0;
	for (index = 0; index < mci->nr_csrows; index++) {
	csrow = mci->csrows[index];
	dimm = csrow->channels[0]->dimm;

	pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
	debugf1("MC%d: %s: %s() Row=%d DRB = %#0x\n",
	mci->mc_idx, __FILE__, __func__, index, drbar);
	row_high_limit = ((u32) drbar << 23);
	/* find the DRAM Chip Select Base address and mask */
	debugf1("MC%d: %s: %s() Row=%d, "
	"Boundary Address=%#0x, Last = %#0x\n",
	mci->mc_idx, __FILE__, __func__, index, row_high_limit,
	row_high_limit_last);

	/* 440GX goes to 2GB, represented with a DRB of 0. */
	if (row_high_limit_last && !row_high_limit)
	row_high_limit = 1UL << 31;

	/* This row is empty [p.49] */
	if (row_high_limit == row_high_limit_last)
	continue;
	row_base = row_high_limit_last;
	csrow->first_page = row_base >> PAGE_SHIFT;
	csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
	dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
	/* EAP reports in 4kilobyte granularity [61] */
	dimm->grain = 1 << 12;
	dimm->mtype = mtype;
	/* I don't think 440BX can tell you device type? FIXME? */
	dimm->dtype = DEV_UNKNOWN;
	/* Mode is global to all rows on 440BX */
	dimm->edac_mode = edac_mode;
	row_high_limit_last = row_high_limit;
	}
	}

	static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
	{
	struct mem_ctl_info *mci;
	struct edac_mc_layer layers[2];
	u8 dramc;
	u32 nbxcfg, ecc_mode;
	enum mem_type mtype;
	enum edac_type edac_mode;

	debugf0("MC: %s: %s()\n", __FILE__, __func__);

	/* Something is really hosed if PCI config space reads from
	* the MC aren't working.
	*/
	if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
	return -EIO;

	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
	layers[0].size = I82443BXGX_NR_CSROWS;
	layers[0].is_virt_csrow = true;
	layers[1].type = EDAC_MC_LAYER_CHANNEL;
	layers[1].size = I82443BXGX_NR_CHANS;
	layers[1].is_virt_csrow = false;
	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
	if (mci == NULL)
	return -ENOMEM;

	debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
	mci->pdev = &pdev->dev;
	mci->mtype_cap = MEM_FLAG_EDO \| MEM_FLAG_SDR \| MEM_FLAG_RDR;
	mci->edac_ctl_cap = EDAC_FLAG_NONE \| EDAC_FLAG_EC \| EDAC_FLAG_SECDED;
	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
	switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) \| BIT(1))) {
	case I82443BXGX_DRAMC_DRAM_IS_EDO:
	mtype = MEM_EDO;
	break;
	case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
	mtype = MEM_SDR;
	break;
	case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
	mtype = MEM_RDR;
	break;
	default:
	debugf0("Unknown/reserved DRAM type value "
	"in DRAMC register!\n");
	mtype = -MEM_UNKNOWN;
	}

	if ((mtype == MEM_SDR) \|\| (mtype == MEM_RDR))
	mci->edac_cap = mci->edac_ctl_cap;
	else
	mci->edac_cap = EDAC_FLAG_NONE;

	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
	pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
	ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
	(BIT(0) \| BIT(1)));

	mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
	? SCRUB_HW_SRC : SCRUB_NONE;

	switch (ecc_mode) {
	case I82443BXGX_NBXCFG_INTEGRITY_NONE:
	edac_mode = EDAC_NONE;
	break;
	case I82443BXGX_NBXCFG_INTEGRITY_EC:
	edac_mode = EDAC_EC;
	break;
	case I82443BXGX_NBXCFG_INTEGRITY_ECC:
	case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
	edac_mode = EDAC_SECDED;
	break;
	default:
	debugf0("%s(): Unknown/reserved ECC state "
	"in NBXCFG register!\n", __func__);
	edac_mode = EDAC_UNKNOWN;
	break;
	}

	i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);

	/* Many BIOSes don't clear error flags on boot, so do this
	* here, or we get "phantom" errors occurring at module-load
	* time. */
	pci_write_bits32(pdev, I82443BXGX_EAP,
	(I82443BXGX_EAP_OFFSET_SBE \|
	I82443BXGX_EAP_OFFSET_MBE),
	(I82443BXGX_EAP_OFFSET_SBE \|
	I82443BXGX_EAP_OFFSET_MBE));

	mci->mod_name = EDAC_MOD_STR;
	mci->mod_ver = I82443_REVISION;
	mci->ctl_name = "I82443BXGX";
	mci->dev_name = pci_name(pdev);
	mci->edac_check = i82443bxgx_edacmc_check;
	mci->ctl_page_to_phys = NULL;

	if (edac_mc_add_mc(mci)) {
	debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
	goto fail;
	}

	/* allocating generic PCI control info */
	i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
	if (!i82443bxgx_pci) {
	printk(KERN_WARNING
	"%s(): Unable to create PCI control\n",
	__func__);
	printk(KERN_WARNING
	"%s(): PCI error report via EDAC not setup\n",
	__func__);
	}

	debugf3("MC: %s: %s(): success\n", __FILE__, __func__);
	return 0;

	fail:
	edac_mc_free(mci);
	return -ENODEV;
	}

	EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_probe1);

	/* returns count (>= 0), or negative on error */
	static int __devinit i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
	const struct pci_device_id *ent)
	{
	int rc;

	debugf0("MC: %s: %s()\n", __FILE__, __func__);

	/* don't need to call pci_enable_device() */
	rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);

	if (mci_pdev == NULL)
	mci_pdev = pci_dev_get(pdev);

	return rc;
	}

	static void __devexit i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
	{
	struct mem_ctl_info *mci;

	debugf0("%s: %s()\n", __FILE__, __func__);

	if (i82443bxgx_pci)
	edac_pci_release_generic_ctl(i82443bxgx_pci);

	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
	return;

	edac_mc_free(mci);
	}

	EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_remove_one);

	static DEFINE_PCI_DEVICE_TABLE(i82443bxgx_pci_tbl) = {
	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
	{0,} /* 0 terminated list. */
	};

	MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);

	static struct pci_driver i82443bxgx_edacmc_driver = {
	.name = EDAC_MOD_STR,
	.probe = i82443bxgx_edacmc_init_one,
	.remove = __devexit_p(i82443bxgx_edacmc_remove_one),
	.id_table = i82443bxgx_pci_tbl,
	};

	static int __init i82443bxgx_edacmc_init(void)
	{
	int pci_rc;
	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
	opstate_init();

	pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
	if (pci_rc < 0)
	goto fail0;

	if (mci_pdev == NULL) {
	const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
	int i = 0;
	i82443bxgx_registered = 0;

	while (mci_pdev == NULL && id->vendor != 0) {
	mci_pdev = pci_get_device(id->vendor,
	id->device, NULL);
	i++;
	id = &i82443bxgx_pci_tbl[i];
	}
	if (!mci_pdev) {
	debugf0("i82443bxgx pci_get_device fail\n");
	pci_rc = -ENODEV;
	goto fail1;
	}

	pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);

	if (pci_rc < 0) {
	debugf0("i82443bxgx init fail\n");
	pci_rc = -ENODEV;
	goto fail1;
	}
	}

	return 0;

	fail1:
	pci_unregister_driver(&i82443bxgx_edacmc_driver);

	fail0:
	if (mci_pdev != NULL)
	pci_dev_put(mci_pdev);

	return pci_rc;
	}

	static void __exit i82443bxgx_edacmc_exit(void)
	{
	pci_unregister_driver(&i82443bxgx_edacmc_driver);

	if (!i82443bxgx_registered)
	i82443bxgx_edacmc_remove_one(mci_pdev);

	if (mci_pdev)
	pci_dev_put(mci_pdev);
	}

	module_init(i82443bxgx_edacmc_init);
	module_exit(i82443bxgx_edacmc_exit);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
	MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");

	module_param(edac_op_state, int, 0444);
	MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");