| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Performance event support for s390x - CPU-measurement Counter Facility |
| * |
| * Copyright IBM Corp. 2012, 2021 |
| * Author(s): Hendrik Brueckner <brueckner@linux.ibm.com> |
| * Thomas Richter <tmricht@linux.ibm.com> |
| */ |
| #define KMSG_COMPONENT "cpum_cf" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/percpu.h> |
| #include <linux/notifier.h> |
| #include <linux/init.h> |
| #include <linux/export.h> |
| #include <linux/miscdevice.h> |
| |
| #include <asm/cpu_mcf.h> |
| #include <asm/hwctrset.h> |
| #include <asm/debug.h> |
| |
| static unsigned int cfdiag_cpu_speed; /* CPU speed for CF_DIAG trailer */ |
| static debug_info_t *cf_dbg; |
| |
| #define CF_DIAG_CTRSET_DEF 0xfeef /* Counter set header mark */ |
| /* interval in seconds */ |
| |
| /* Counter sets are stored as data stream in a page sized memory buffer and |
| * exported to user space via raw data attached to the event sample data. |
| * Each counter set starts with an eight byte header consisting of: |
| * - a two byte eye catcher (0xfeef) |
| * - a one byte counter set number |
| * - a two byte counter set size (indicates the number of counters in this set) |
| * - a three byte reserved value (must be zero) to make the header the same |
| * size as a counter value. |
| * All counter values are eight byte in size. |
| * |
| * All counter sets are followed by a 64 byte trailer. |
| * The trailer consists of a: |
| * - flag field indicating valid fields when corresponding bit set |
| * - the counter facility first and second version number |
| * - the CPU speed if nonzero |
| * - the time stamp the counter sets have been collected |
| * - the time of day (TOD) base value |
| * - the machine type. |
| * |
| * The counter sets are saved when the process is prepared to be executed on a |
| * CPU and saved again when the process is going to be removed from a CPU. |
| * The difference of both counter sets are calculated and stored in the event |
| * sample data area. |
| */ |
| struct cf_ctrset_entry { /* CPU-M CF counter set entry (8 byte) */ |
| unsigned int def:16; /* 0-15 Data Entry Format */ |
| unsigned int set:16; /* 16-31 Counter set identifier */ |
| unsigned int ctr:16; /* 32-47 Number of stored counters */ |
| unsigned int res1:16; /* 48-63 Reserved */ |
| }; |
| |
| struct cf_trailer_entry { /* CPU-M CF_DIAG trailer (64 byte) */ |
| /* 0 - 7 */ |
| union { |
| struct { |
| unsigned int clock_base:1; /* TOD clock base set */ |
| unsigned int speed:1; /* CPU speed set */ |
| /* Measurement alerts */ |
| unsigned int mtda:1; /* Loss of MT ctr. data alert */ |
| unsigned int caca:1; /* Counter auth. change alert */ |
| unsigned int lcda:1; /* Loss of counter data alert */ |
| }; |
| unsigned long flags; /* 0-63 All indicators */ |
| }; |
| /* 8 - 15 */ |
| unsigned int cfvn:16; /* 64-79 Ctr First Version */ |
| unsigned int csvn:16; /* 80-95 Ctr Second Version */ |
| unsigned int cpu_speed:32; /* 96-127 CPU speed */ |
| /* 16 - 23 */ |
| unsigned long timestamp; /* 128-191 Timestamp (TOD) */ |
| /* 24 - 55 */ |
| union { |
| struct { |
| unsigned long progusage1; |
| unsigned long progusage2; |
| unsigned long progusage3; |
| unsigned long tod_base; |
| }; |
| unsigned long progusage[4]; |
| }; |
| /* 56 - 63 */ |
| unsigned int mach_type:16; /* Machine type */ |
| unsigned int res1:16; /* Reserved */ |
| unsigned int res2:32; /* Reserved */ |
| }; |
| |
| /* Create the trailer data at the end of a page. */ |
| static void cfdiag_trailer(struct cf_trailer_entry *te) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct cpuid cpuid; |
| |
| te->cfvn = cpuhw->info.cfvn; /* Counter version numbers */ |
| te->csvn = cpuhw->info.csvn; |
| |
| get_cpu_id(&cpuid); /* Machine type */ |
| te->mach_type = cpuid.machine; |
| te->cpu_speed = cfdiag_cpu_speed; |
| if (te->cpu_speed) |
| te->speed = 1; |
| te->clock_base = 1; /* Save clock base */ |
| te->tod_base = tod_clock_base.tod; |
| te->timestamp = get_tod_clock_fast(); |
| } |
| |
| /* Read a counter set. The counter set number determines the counter set and |
| * the CPUM-CF first and second version number determine the number of |
| * available counters in each counter set. |
| * Each counter set starts with header containing the counter set number and |
| * the number of eight byte counters. |
| * |
| * The functions returns the number of bytes occupied by this counter set |
| * including the header. |
| * If there is no counter in the counter set, this counter set is useless and |
| * zero is returned on this case. |
| * |
| * Note that the counter sets may not be enabled or active and the stcctm |
| * instruction might return error 3. Depending on error_ok value this is ok, |
| * for example when called from cpumf_pmu_start() call back function. |
| */ |
| static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset, |
| size_t room, bool error_ok) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| size_t ctrset_size, need = 0; |
| int rc = 3; /* Assume write failure */ |
| |
| ctrdata->def = CF_DIAG_CTRSET_DEF; |
| ctrdata->set = ctrset; |
| ctrdata->res1 = 0; |
| ctrset_size = cpum_cf_ctrset_size(ctrset, &cpuhw->info); |
| |
| if (ctrset_size) { /* Save data */ |
| need = ctrset_size * sizeof(u64) + sizeof(*ctrdata); |
| if (need <= room) { |
| rc = ctr_stcctm(ctrset, ctrset_size, |
| (u64 *)(ctrdata + 1)); |
| } |
| if (rc != 3 || error_ok) |
| ctrdata->ctr = ctrset_size; |
| else |
| need = 0; |
| } |
| |
| debug_sprintf_event(cf_dbg, 3, |
| "%s ctrset %d ctrset_size %zu cfvn %d csvn %d" |
| " need %zd rc %d\n", __func__, ctrset, ctrset_size, |
| cpuhw->info.cfvn, cpuhw->info.csvn, need, rc); |
| return need; |
| } |
| |
| /* Read out all counter sets and save them in the provided data buffer. |
| * The last 64 byte host an artificial trailer entry. |
| */ |
| static size_t cfdiag_getctr(void *data, size_t sz, unsigned long auth, |
| bool error_ok) |
| { |
| struct cf_trailer_entry *trailer; |
| size_t offset = 0, done; |
| int i; |
| |
| memset(data, 0, sz); |
| sz -= sizeof(*trailer); /* Always room for trailer */ |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) { |
| struct cf_ctrset_entry *ctrdata = data + offset; |
| |
| if (!(auth & cpumf_ctr_ctl[i])) |
| continue; /* Counter set not authorized */ |
| |
| done = cfdiag_getctrset(ctrdata, i, sz - offset, error_ok); |
| offset += done; |
| } |
| trailer = data + offset; |
| cfdiag_trailer(trailer); |
| return offset + sizeof(*trailer); |
| } |
| |
| /* Calculate the difference for each counter in a counter set. */ |
| static void cfdiag_diffctrset(u64 *pstart, u64 *pstop, int counters) |
| { |
| for (; --counters >= 0; ++pstart, ++pstop) |
| if (*pstop >= *pstart) |
| *pstop -= *pstart; |
| else |
| *pstop = *pstart - *pstop + 1; |
| } |
| |
| /* Scan the counter sets and calculate the difference of each counter |
| * in each set. The result is the increment of each counter during the |
| * period the counter set has been activated. |
| * |
| * Return true on success. |
| */ |
| static int cfdiag_diffctr(struct cpu_cf_events *cpuhw, unsigned long auth) |
| { |
| struct cf_trailer_entry *trailer_start, *trailer_stop; |
| struct cf_ctrset_entry *ctrstart, *ctrstop; |
| size_t offset = 0; |
| |
| auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1; |
| do { |
| ctrstart = (struct cf_ctrset_entry *)(cpuhw->start + offset); |
| ctrstop = (struct cf_ctrset_entry *)(cpuhw->stop + offset); |
| |
| if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) { |
| pr_err_once("cpum_cf_diag counter set compare error " |
| "in set %i\n", ctrstart->set); |
| return 0; |
| } |
| auth &= ~cpumf_ctr_ctl[ctrstart->set]; |
| if (ctrstart->def == CF_DIAG_CTRSET_DEF) { |
| cfdiag_diffctrset((u64 *)(ctrstart + 1), |
| (u64 *)(ctrstop + 1), ctrstart->ctr); |
| offset += ctrstart->ctr * sizeof(u64) + |
| sizeof(*ctrstart); |
| } |
| } while (ctrstart->def && auth); |
| |
| /* Save time_stamp from start of event in stop's trailer */ |
| trailer_start = (struct cf_trailer_entry *)(cpuhw->start + offset); |
| trailer_stop = (struct cf_trailer_entry *)(cpuhw->stop + offset); |
| trailer_stop->progusage[0] = trailer_start->timestamp; |
| |
| return 1; |
| } |
| |
| static enum cpumf_ctr_set get_counter_set(u64 event) |
| { |
| int set = CPUMF_CTR_SET_MAX; |
| |
| if (event < 32) |
| set = CPUMF_CTR_SET_BASIC; |
| else if (event < 64) |
| set = CPUMF_CTR_SET_USER; |
| else if (event < 128) |
| set = CPUMF_CTR_SET_CRYPTO; |
| else if (event < 288) |
| set = CPUMF_CTR_SET_EXT; |
| else if (event >= 448 && event < 496) |
| set = CPUMF_CTR_SET_MT_DIAG; |
| |
| return set; |
| } |
| |
| static int validate_ctr_version(const struct hw_perf_event *hwc, |
| enum cpumf_ctr_set set) |
| { |
| struct cpu_cf_events *cpuhw; |
| int err = 0; |
| u16 mtdiag_ctl; |
| |
| cpuhw = &get_cpu_var(cpu_cf_events); |
| |
| /* check required version for counter sets */ |
| switch (set) { |
| case CPUMF_CTR_SET_BASIC: |
| case CPUMF_CTR_SET_USER: |
| if (cpuhw->info.cfvn < 1) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_CRYPTO: |
| if ((cpuhw->info.csvn >= 1 && cpuhw->info.csvn <= 5 && |
| hwc->config > 79) || |
| (cpuhw->info.csvn >= 6 && hwc->config > 83)) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_EXT: |
| if (cpuhw->info.csvn < 1) |
| err = -EOPNOTSUPP; |
| if ((cpuhw->info.csvn == 1 && hwc->config > 159) || |
| (cpuhw->info.csvn == 2 && hwc->config > 175) || |
| (cpuhw->info.csvn >= 3 && cpuhw->info.csvn <= 5 |
| && hwc->config > 255) || |
| (cpuhw->info.csvn >= 6 && hwc->config > 287)) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_MT_DIAG: |
| if (cpuhw->info.csvn <= 3) |
| err = -EOPNOTSUPP; |
| /* |
| * MT-diagnostic counters are read-only. The counter set |
| * is automatically enabled and activated on all CPUs with |
| * multithreading (SMT). Deactivation of multithreading |
| * also disables the counter set. State changes are ignored |
| * by lcctl(). Because Linux controls SMT enablement through |
| * a kernel parameter only, the counter set is either disabled |
| * or enabled and active. |
| * |
| * Thus, the counters can only be used if SMT is on and the |
| * counter set is enabled and active. |
| */ |
| mtdiag_ctl = cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]; |
| if (!((cpuhw->info.auth_ctl & mtdiag_ctl) && |
| (cpuhw->info.enable_ctl & mtdiag_ctl) && |
| (cpuhw->info.act_ctl & mtdiag_ctl))) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_MAX: |
| err = -EOPNOTSUPP; |
| } |
| |
| put_cpu_var(cpu_cf_events); |
| return err; |
| } |
| |
| static int validate_ctr_auth(const struct hw_perf_event *hwc) |
| { |
| struct cpu_cf_events *cpuhw; |
| int err = 0; |
| |
| cpuhw = &get_cpu_var(cpu_cf_events); |
| |
| /* Check authorization for cpu counter sets. |
| * If the particular CPU counter set is not authorized, |
| * return with -ENOENT in order to fall back to other |
| * PMUs that might suffice the event request. |
| */ |
| if (!(hwc->config_base & cpuhw->info.auth_ctl)) |
| err = -ENOENT; |
| |
| put_cpu_var(cpu_cf_events); |
| return err; |
| } |
| |
| /* |
| * Change the CPUMF state to active. |
| * Enable and activate the CPU-counter sets according |
| * to the per-cpu control state. |
| */ |
| static void cpumf_pmu_enable(struct pmu *pmu) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| int err; |
| |
| if (cpuhw->flags & PMU_F_ENABLED) |
| return; |
| |
| err = lcctl(cpuhw->state | cpuhw->dev_state); |
| if (err) { |
| pr_err("Enabling the performance measuring unit " |
| "failed with rc=%x\n", err); |
| return; |
| } |
| |
| cpuhw->flags |= PMU_F_ENABLED; |
| } |
| |
| /* |
| * Change the CPUMF state to inactive. |
| * Disable and enable (inactive) the CPU-counter sets according |
| * to the per-cpu control state. |
| */ |
| static void cpumf_pmu_disable(struct pmu *pmu) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| int err; |
| u64 inactive; |
| |
| if (!(cpuhw->flags & PMU_F_ENABLED)) |
| return; |
| |
| inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1); |
| inactive |= cpuhw->dev_state; |
| err = lcctl(inactive); |
| if (err) { |
| pr_err("Disabling the performance measuring unit " |
| "failed with rc=%x\n", err); |
| return; |
| } |
| |
| cpuhw->flags &= ~PMU_F_ENABLED; |
| } |
| |
| |
| /* Number of perf events counting hardware events */ |
| static atomic_t num_events = ATOMIC_INIT(0); |
| /* Used to avoid races in calling reserve/release_cpumf_hardware */ |
| static DEFINE_MUTEX(pmc_reserve_mutex); |
| |
| /* Release the PMU if event is the last perf event */ |
| static void hw_perf_event_destroy(struct perf_event *event) |
| { |
| if (!atomic_add_unless(&num_events, -1, 1)) { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_dec_return(&num_events) == 0) |
| __kernel_cpumcf_end(); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| } |
| |
| /* CPUMF <-> perf event mappings for kernel+userspace (basic set) */ |
| static const int cpumf_generic_events_basic[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = 0, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 1, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = -1, |
| [PERF_COUNT_HW_CACHE_MISSES] = -1, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1, |
| [PERF_COUNT_HW_BRANCH_MISSES] = -1, |
| [PERF_COUNT_HW_BUS_CYCLES] = -1, |
| }; |
| /* CPUMF <-> perf event mappings for userspace (problem-state set) */ |
| static const int cpumf_generic_events_user[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = 32, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 33, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = -1, |
| [PERF_COUNT_HW_CACHE_MISSES] = -1, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1, |
| [PERF_COUNT_HW_BRANCH_MISSES] = -1, |
| [PERF_COUNT_HW_BUS_CYCLES] = -1, |
| }; |
| |
| static void cpumf_hw_inuse(void) |
| { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_inc_return(&num_events) == 1) |
| __kernel_cpumcf_begin(); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| |
| static int __hw_perf_event_init(struct perf_event *event, unsigned int type) |
| { |
| struct perf_event_attr *attr = &event->attr; |
| struct hw_perf_event *hwc = &event->hw; |
| enum cpumf_ctr_set set; |
| int err = 0; |
| u64 ev; |
| |
| switch (type) { |
| case PERF_TYPE_RAW: |
| /* Raw events are used to access counters directly, |
| * hence do not permit excludes */ |
| if (attr->exclude_kernel || attr->exclude_user || |
| attr->exclude_hv) |
| return -EOPNOTSUPP; |
| ev = attr->config; |
| break; |
| |
| case PERF_TYPE_HARDWARE: |
| if (is_sampling_event(event)) /* No sampling support */ |
| return -ENOENT; |
| ev = attr->config; |
| /* Count user space (problem-state) only */ |
| if (!attr->exclude_user && attr->exclude_kernel) { |
| if (ev >= ARRAY_SIZE(cpumf_generic_events_user)) |
| return -EOPNOTSUPP; |
| ev = cpumf_generic_events_user[ev]; |
| |
| /* No support for kernel space counters only */ |
| } else if (!attr->exclude_kernel && attr->exclude_user) { |
| return -EOPNOTSUPP; |
| } else { /* Count user and kernel space */ |
| if (ev >= ARRAY_SIZE(cpumf_generic_events_basic)) |
| return -EOPNOTSUPP; |
| ev = cpumf_generic_events_basic[ev]; |
| } |
| break; |
| |
| default: |
| return -ENOENT; |
| } |
| |
| if (ev == -1) |
| return -ENOENT; |
| |
| if (ev > PERF_CPUM_CF_MAX_CTR) |
| return -ENOENT; |
| |
| /* Obtain the counter set to which the specified counter belongs */ |
| set = get_counter_set(ev); |
| switch (set) { |
| case CPUMF_CTR_SET_BASIC: |
| case CPUMF_CTR_SET_USER: |
| case CPUMF_CTR_SET_CRYPTO: |
| case CPUMF_CTR_SET_EXT: |
| case CPUMF_CTR_SET_MT_DIAG: |
| /* |
| * Use the hardware perf event structure to store the |
| * counter number in the 'config' member and the counter |
| * set number in the 'config_base' as bit mask. |
| * It is later used to enable/disable the counter(s). |
| */ |
| hwc->config = ev; |
| hwc->config_base = cpumf_ctr_ctl[set]; |
| break; |
| case CPUMF_CTR_SET_MAX: |
| /* The counter could not be associated to a counter set */ |
| return -EINVAL; |
| } |
| |
| /* Initialize for using the CPU-measurement counter facility */ |
| cpumf_hw_inuse(); |
| event->destroy = hw_perf_event_destroy; |
| |
| /* Finally, validate version and authorization of the counter set */ |
| err = validate_ctr_auth(hwc); |
| if (!err) |
| err = validate_ctr_version(hwc, set); |
| |
| return err; |
| } |
| |
| static int cpumf_pmu_event_init(struct perf_event *event) |
| { |
| unsigned int type = event->attr.type; |
| int err; |
| |
| if (type == PERF_TYPE_HARDWARE || type == PERF_TYPE_RAW) |
| err = __hw_perf_event_init(event, type); |
| else if (event->pmu->type == type) |
| /* Registered as unknown PMU */ |
| err = __hw_perf_event_init(event, PERF_TYPE_RAW); |
| else |
| return -ENOENT; |
| |
| if (unlikely(err) && event->destroy) |
| event->destroy(event); |
| |
| return err; |
| } |
| |
| static int hw_perf_event_reset(struct perf_event *event) |
| { |
| u64 prev, new; |
| int err; |
| |
| do { |
| prev = local64_read(&event->hw.prev_count); |
| err = ecctr(event->hw.config, &new); |
| if (err) { |
| if (err != 3) |
| break; |
| /* The counter is not (yet) available. This |
| * might happen if the counter set to which |
| * this counter belongs is in the disabled |
| * state. |
| */ |
| new = 0; |
| } |
| } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev); |
| |
| return err; |
| } |
| |
| static void hw_perf_event_update(struct perf_event *event) |
| { |
| u64 prev, new, delta; |
| int err; |
| |
| do { |
| prev = local64_read(&event->hw.prev_count); |
| err = ecctr(event->hw.config, &new); |
| if (err) |
| return; |
| } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev); |
| |
| delta = (prev <= new) ? new - prev |
| : (-1ULL - prev) + new + 1; /* overflow */ |
| local64_add(delta, &event->count); |
| } |
| |
| static void cpumf_pmu_read(struct perf_event *event) |
| { |
| if (event->hw.state & PERF_HES_STOPPED) |
| return; |
| |
| hw_perf_event_update(event); |
| } |
| |
| static void cpumf_pmu_start(struct perf_event *event, int flags) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct hw_perf_event *hwc = &event->hw; |
| int i; |
| |
| if (!(hwc->state & PERF_HES_STOPPED)) |
| return; |
| |
| hwc->state = 0; |
| |
| /* (Re-)enable and activate the counter set */ |
| ctr_set_enable(&cpuhw->state, hwc->config_base); |
| ctr_set_start(&cpuhw->state, hwc->config_base); |
| |
| /* The counter set to which this counter belongs can be already active. |
| * Because all counters in a set are active, the event->hw.prev_count |
| * needs to be synchronized. At this point, the counter set can be in |
| * the inactive or disabled state. |
| */ |
| if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) { |
| cpuhw->usedss = cfdiag_getctr(cpuhw->start, |
| sizeof(cpuhw->start), |
| hwc->config_base, true); |
| } else { |
| hw_perf_event_reset(event); |
| } |
| |
| /* Increment refcount for counter sets */ |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) |
| if ((hwc->config_base & cpumf_ctr_ctl[i])) |
| atomic_inc(&cpuhw->ctr_set[i]); |
| } |
| |
| /* Create perf event sample with the counter sets as raw data. The sample |
| * is then pushed to the event subsystem and the function checks for |
| * possible event overflows. If an event overflow occurs, the PMU is |
| * stopped. |
| * |
| * Return non-zero if an event overflow occurred. |
| */ |
| static int cfdiag_push_sample(struct perf_event *event, |
| struct cpu_cf_events *cpuhw) |
| { |
| struct perf_sample_data data; |
| struct perf_raw_record raw; |
| struct pt_regs regs; |
| int overflow; |
| |
| /* Setup perf sample */ |
| perf_sample_data_init(&data, 0, event->hw.last_period); |
| memset(®s, 0, sizeof(regs)); |
| memset(&raw, 0, sizeof(raw)); |
| |
| if (event->attr.sample_type & PERF_SAMPLE_CPU) |
| data.cpu_entry.cpu = event->cpu; |
| if (event->attr.sample_type & PERF_SAMPLE_RAW) { |
| raw.frag.size = cpuhw->usedss; |
| raw.frag.data = cpuhw->stop; |
| raw.size = raw.frag.size; |
| data.raw = &raw; |
| } |
| |
| overflow = perf_event_overflow(event, &data, ®s); |
| debug_sprintf_event(cf_dbg, 3, |
| "%s event %#llx sample_type %#llx raw %d ov %d\n", |
| __func__, event->hw.config, |
| event->attr.sample_type, raw.size, overflow); |
| if (overflow) |
| event->pmu->stop(event, 0); |
| |
| perf_event_update_userpage(event); |
| return overflow; |
| } |
| |
| static void cpumf_pmu_stop(struct perf_event *event, int flags) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct hw_perf_event *hwc = &event->hw; |
| int i; |
| |
| if (!(hwc->state & PERF_HES_STOPPED)) { |
| /* Decrement reference count for this counter set and if this |
| * is the last used counter in the set, clear activation |
| * control and set the counter set state to inactive. |
| */ |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) { |
| if (!(hwc->config_base & cpumf_ctr_ctl[i])) |
| continue; |
| if (!atomic_dec_return(&cpuhw->ctr_set[i])) |
| ctr_set_stop(&cpuhw->state, cpumf_ctr_ctl[i]); |
| } |
| hwc->state |= PERF_HES_STOPPED; |
| } |
| |
| if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) { |
| if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) { |
| local64_inc(&event->count); |
| cpuhw->usedss = cfdiag_getctr(cpuhw->stop, |
| sizeof(cpuhw->stop), |
| event->hw.config_base, |
| false); |
| if (cfdiag_diffctr(cpuhw, event->hw.config_base)) |
| cfdiag_push_sample(event, cpuhw); |
| } else |
| hw_perf_event_update(event); |
| hwc->state |= PERF_HES_UPTODATE; |
| } |
| } |
| |
| static int cpumf_pmu_add(struct perf_event *event, int flags) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| |
| ctr_set_enable(&cpuhw->state, event->hw.config_base); |
| event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; |
| |
| if (flags & PERF_EF_START) |
| cpumf_pmu_start(event, PERF_EF_RELOAD); |
| |
| return 0; |
| } |
| |
| static void cpumf_pmu_del(struct perf_event *event, int flags) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| int i; |
| |
| cpumf_pmu_stop(event, PERF_EF_UPDATE); |
| |
| /* Check if any counter in the counter set is still used. If not used, |
| * change the counter set to the disabled state. This also clears the |
| * content of all counters in the set. |
| * |
| * When a new perf event has been added but not yet started, this can |
| * clear enable control and resets all counters in a set. Therefore, |
| * cpumf_pmu_start() always has to reenable a counter set. |
| */ |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) |
| if (!atomic_read(&cpuhw->ctr_set[i])) |
| ctr_set_disable(&cpuhw->state, cpumf_ctr_ctl[i]); |
| } |
| |
| /* Performance monitoring unit for s390x */ |
| static struct pmu cpumf_pmu = { |
| .task_ctx_nr = perf_sw_context, |
| .capabilities = PERF_PMU_CAP_NO_INTERRUPT, |
| .pmu_enable = cpumf_pmu_enable, |
| .pmu_disable = cpumf_pmu_disable, |
| .event_init = cpumf_pmu_event_init, |
| .add = cpumf_pmu_add, |
| .del = cpumf_pmu_del, |
| .start = cpumf_pmu_start, |
| .stop = cpumf_pmu_stop, |
| .read = cpumf_pmu_read, |
| }; |
| |
| static int cfset_init(void); |
| static int __init cpumf_pmu_init(void) |
| { |
| int rc; |
| |
| if (!kernel_cpumcf_avail()) |
| return -ENODEV; |
| |
| /* Setup s390dbf facility */ |
| cf_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128); |
| if (!cf_dbg) { |
| pr_err("Registration of s390dbf(cpum_cf) failed\n"); |
| return -ENOMEM; |
| } |
| debug_register_view(cf_dbg, &debug_sprintf_view); |
| |
| cpumf_pmu.attr_groups = cpumf_cf_event_group(); |
| rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", -1); |
| if (rc) { |
| debug_unregister_view(cf_dbg, &debug_sprintf_view); |
| debug_unregister(cf_dbg); |
| pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc); |
| } else if (stccm_avail()) { /* Setup counter set device */ |
| cfset_init(); |
| } |
| return rc; |
| } |
| |
| /* Support for the CPU Measurement Facility counter set extraction using |
| * device /dev/hwctr. This allows user space programs to extract complete |
| * counter set via normal file operations. |
| */ |
| |
| static atomic_t cfset_opencnt = ATOMIC_INIT(0); /* Excl. access */ |
| static DEFINE_MUTEX(cfset_ctrset_mutex);/* Synchronize access to hardware */ |
| struct cfset_call_on_cpu_parm { /* Parm struct for smp_call_on_cpu */ |
| unsigned int sets; /* Counter set bit mask */ |
| atomic_t cpus_ack; /* # CPUs successfully executed func */ |
| }; |
| |
| static struct cfset_request { /* CPUs and counter set bit mask */ |
| unsigned long ctrset; /* Bit mask of counter set to read */ |
| cpumask_t mask; /* CPU mask to read from */ |
| } cfset_request; |
| |
| static void cfset_ctrset_clear(void) |
| { |
| cpumask_clear(&cfset_request.mask); |
| cfset_request.ctrset = 0; |
| } |
| |
| /* The /dev/hwctr device access uses PMU_F_IN_USE to mark the device access |
| * path is currently used. |
| * The cpu_cf_events::dev_state is used to denote counter sets in use by this |
| * interface. It is always or'ed in. If this interface is not active, its |
| * value is zero and no additional counter sets will be included. |
| * |
| * The cpu_cf_events::state is used by the perf_event_open SVC and remains |
| * unchanged. |
| * |
| * perf_pmu_enable() and perf_pmu_enable() and its call backs |
| * cpumf_pmu_enable() and cpumf_pmu_disable() are called by the |
| * performance measurement subsystem to enable per process |
| * CPU Measurement counter facility. |
| * The XXX_enable() and XXX_disable functions are used to turn off |
| * x86 performance monitoring interrupt (PMI) during scheduling. |
| * s390 uses these calls to temporarily stop and resume the active CPU |
| * counters sets during scheduling. |
| * |
| * We do allow concurrent access of perf_event_open() SVC and /dev/hwctr |
| * device access. The perf_event_open() SVC interface makes a lot of effort |
| * to only run the counters while the calling process is actively scheduled |
| * to run. |
| * When /dev/hwctr interface is also used at the same time, the counter sets |
| * will keep running, even when the process is scheduled off a CPU. |
| * However this is not a problem and does not lead to wrong counter values |
| * for the perf_event_open() SVC. The current counter value will be recorded |
| * during schedule-in. At schedule-out time the current counter value is |
| * extracted again and the delta is calculated and added to the event. |
| */ |
| /* Stop all counter sets via ioctl interface */ |
| static void cfset_ioctl_off(void *parm) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct cfset_call_on_cpu_parm *p = parm; |
| int rc; |
| |
| cpuhw->dev_state = 0; |
| for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc) |
| if ((p->sets & cpumf_ctr_ctl[rc])) |
| atomic_dec(&cpuhw->ctr_set[rc]); |
| rc = lcctl(cpuhw->state); /* Keep perf_event_open counter sets */ |
| if (rc) |
| pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n", |
| cpuhw->state, S390_HWCTR_DEVICE, rc); |
| cpuhw->flags &= ~PMU_F_IN_USE; |
| debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n", |
| __func__, rc, cpuhw->state, cpuhw->dev_state); |
| } |
| |
| /* Start counter sets on particular CPU */ |
| static void cfset_ioctl_on(void *parm) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct cfset_call_on_cpu_parm *p = parm; |
| int rc; |
| |
| cpuhw->flags |= PMU_F_IN_USE; |
| ctr_set_enable(&cpuhw->dev_state, p->sets); |
| ctr_set_start(&cpuhw->dev_state, p->sets); |
| for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc) |
| if ((p->sets & cpumf_ctr_ctl[rc])) |
| atomic_inc(&cpuhw->ctr_set[rc]); |
| rc = lcctl(cpuhw->dev_state | cpuhw->state); /* Start counter sets */ |
| if (!rc) |
| atomic_inc(&p->cpus_ack); |
| else |
| pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n", |
| cpuhw->dev_state | cpuhw->state, S390_HWCTR_DEVICE, rc); |
| debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n", |
| __func__, rc, cpuhw->state, cpuhw->dev_state); |
| } |
| |
| static void cfset_release_cpu(void *p) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| int rc; |
| |
| debug_sprintf_event(cf_dbg, 4, "%s state %#llx dev_state %#llx\n", |
| __func__, cpuhw->state, cpuhw->dev_state); |
| rc = lcctl(cpuhw->state); /* Keep perf_event_open counter sets */ |
| if (rc) |
| pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n", |
| cpuhw->state, S390_HWCTR_DEVICE, rc); |
| cpuhw->dev_state = 0; |
| } |
| |
| /* Release function is also called when application gets terminated without |
| * doing a proper ioctl(..., S390_HWCTR_STOP, ...) command. |
| */ |
| static int cfset_release(struct inode *inode, struct file *file) |
| { |
| on_each_cpu(cfset_release_cpu, NULL, 1); |
| hw_perf_event_destroy(NULL); |
| cfset_ctrset_clear(); |
| atomic_set(&cfset_opencnt, 0); |
| return 0; |
| } |
| |
| static int cfset_open(struct inode *inode, struct file *file) |
| { |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| /* Only one user space program can open /dev/hwctr */ |
| if (atomic_xchg(&cfset_opencnt, 1)) |
| return -EBUSY; |
| |
| cpumf_hw_inuse(); |
| file->private_data = NULL; |
| /* nonseekable_open() never fails */ |
| return nonseekable_open(inode, file); |
| } |
| |
| static int cfset_all_stop(void) |
| { |
| struct cfset_call_on_cpu_parm p = { |
| .sets = cfset_request.ctrset, |
| }; |
| cpumask_var_t mask; |
| |
| if (!alloc_cpumask_var(&mask, GFP_KERNEL)) |
| return -ENOMEM; |
| cpumask_and(mask, &cfset_request.mask, cpu_online_mask); |
| on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1); |
| free_cpumask_var(mask); |
| return 0; |
| } |
| |
| static int cfset_all_start(void) |
| { |
| struct cfset_call_on_cpu_parm p = { |
| .sets = cfset_request.ctrset, |
| .cpus_ack = ATOMIC_INIT(0), |
| }; |
| cpumask_var_t mask; |
| int rc = 0; |
| |
| if (!alloc_cpumask_var(&mask, GFP_KERNEL)) |
| return -ENOMEM; |
| cpumask_and(mask, &cfset_request.mask, cpu_online_mask); |
| on_each_cpu_mask(mask, cfset_ioctl_on, &p, 1); |
| if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) { |
| on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1); |
| rc = -EIO; |
| debug_sprintf_event(cf_dbg, 4, "%s CPUs missing", __func__); |
| } |
| free_cpumask_var(mask); |
| return rc; |
| } |
| |
| |
| /* Return the maximum required space for all possible CPUs in case one |
| * CPU will be onlined during the START, READ, STOP cycles. |
| * To find out the size of the counter sets, any one CPU will do. They |
| * all have the same counter sets. |
| */ |
| static size_t cfset_needspace(unsigned int sets) |
| { |
| struct cpu_cf_events *cpuhw = get_cpu_ptr(&cpu_cf_events); |
| size_t bytes = 0; |
| int i; |
| |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) { |
| if (!(sets & cpumf_ctr_ctl[i])) |
| continue; |
| bytes += cpum_cf_ctrset_size(i, &cpuhw->info) * sizeof(u64) + |
| sizeof(((struct s390_ctrset_setdata *)0)->set) + |
| sizeof(((struct s390_ctrset_setdata *)0)->no_cnts); |
| } |
| bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids * |
| (bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) + |
| sizeof(((struct s390_ctrset_cpudata *)0)->no_sets)); |
| put_cpu_ptr(&cpu_cf_events); |
| return bytes; |
| } |
| |
| static int cfset_all_copy(unsigned long arg, cpumask_t *mask) |
| { |
| struct s390_ctrset_read __user *ctrset_read; |
| unsigned int cpu, cpus, rc; |
| void __user *uptr; |
| |
| ctrset_read = (struct s390_ctrset_read __user *)arg; |
| uptr = ctrset_read->data; |
| for_each_cpu(cpu, mask) { |
| struct cpu_cf_events *cpuhw = per_cpu_ptr(&cpu_cf_events, cpu); |
| struct s390_ctrset_cpudata __user *ctrset_cpudata; |
| |
| ctrset_cpudata = uptr; |
| rc = put_user(cpu, &ctrset_cpudata->cpu_nr); |
| rc |= put_user(cpuhw->sets, &ctrset_cpudata->no_sets); |
| rc |= copy_to_user(ctrset_cpudata->data, cpuhw->data, |
| cpuhw->used); |
| if (rc) |
| return -EFAULT; |
| uptr += sizeof(struct s390_ctrset_cpudata) + cpuhw->used; |
| cond_resched(); |
| } |
| cpus = cpumask_weight(mask); |
| if (put_user(cpus, &ctrset_read->no_cpus)) |
| return -EFAULT; |
| debug_sprintf_event(cf_dbg, 4, "%s copied %ld\n", __func__, |
| uptr - (void __user *)ctrset_read->data); |
| return 0; |
| } |
| |
| static size_t cfset_cpuset_read(struct s390_ctrset_setdata *p, int ctrset, |
| int ctrset_size, size_t room) |
| { |
| size_t need = 0; |
| int rc = -1; |
| |
| need = sizeof(*p) + sizeof(u64) * ctrset_size; |
| if (need <= room) { |
| p->set = cpumf_ctr_ctl[ctrset]; |
| p->no_cnts = ctrset_size; |
| rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv); |
| if (rc == 3) /* Nothing stored */ |
| need = 0; |
| } |
| return need; |
| } |
| |
| /* Read all counter sets. */ |
| static void cfset_cpu_read(void *parm) |
| { |
| struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); |
| struct cfset_call_on_cpu_parm *p = parm; |
| int set, set_size; |
| size_t space; |
| |
| /* No data saved yet */ |
| cpuhw->used = 0; |
| cpuhw->sets = 0; |
| memset(cpuhw->data, 0, sizeof(cpuhw->data)); |
| |
| /* Scan the counter sets */ |
| for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) { |
| struct s390_ctrset_setdata *sp = (void *)cpuhw->data + |
| cpuhw->used; |
| |
| if (!(p->sets & cpumf_ctr_ctl[set])) |
| continue; /* Counter set not in list */ |
| set_size = cpum_cf_ctrset_size(set, &cpuhw->info); |
| space = sizeof(cpuhw->data) - cpuhw->used; |
| space = cfset_cpuset_read(sp, set, set_size, space); |
| if (space) { |
| cpuhw->used += space; |
| cpuhw->sets += 1; |
| } |
| } |
| debug_sprintf_event(cf_dbg, 4, "%s sets %d used %zd\n", __func__, |
| cpuhw->sets, cpuhw->used); |
| } |
| |
| static int cfset_all_read(unsigned long arg) |
| { |
| struct cfset_call_on_cpu_parm p; |
| cpumask_var_t mask; |
| int rc; |
| |
| if (!alloc_cpumask_var(&mask, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| p.sets = cfset_request.ctrset; |
| cpumask_and(mask, &cfset_request.mask, cpu_online_mask); |
| on_each_cpu_mask(mask, cfset_cpu_read, &p, 1); |
| rc = cfset_all_copy(arg, mask); |
| free_cpumask_var(mask); |
| return rc; |
| } |
| |
| static long cfset_ioctl_read(unsigned long arg) |
| { |
| struct s390_ctrset_read read; |
| int ret = 0; |
| |
| if (copy_from_user(&read, (char __user *)arg, sizeof(read))) |
| return -EFAULT; |
| ret = cfset_all_read(arg); |
| return ret; |
| } |
| |
| static long cfset_ioctl_stop(void) |
| { |
| int ret = ENXIO; |
| |
| if (cfset_request.ctrset) { |
| ret = cfset_all_stop(); |
| cfset_ctrset_clear(); |
| } |
| return ret; |
| } |
| |
| static long cfset_ioctl_start(unsigned long arg) |
| { |
| struct s390_ctrset_start __user *ustart; |
| struct s390_ctrset_start start; |
| void __user *umask; |
| unsigned int len; |
| int ret = 0; |
| size_t need; |
| |
| if (cfset_request.ctrset) |
| return -EBUSY; |
| ustart = (struct s390_ctrset_start __user *)arg; |
| if (copy_from_user(&start, ustart, sizeof(start))) |
| return -EFAULT; |
| if (start.version != S390_HWCTR_START_VERSION) |
| return -EINVAL; |
| if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] | |
| cpumf_ctr_ctl[CPUMF_CTR_SET_USER] | |
| cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] | |
| cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] | |
| cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG])) |
| return -EINVAL; /* Invalid counter set */ |
| if (!start.counter_sets) |
| return -EINVAL; /* No counter set at all? */ |
| cpumask_clear(&cfset_request.mask); |
| len = min_t(u64, start.cpumask_len, cpumask_size()); |
| umask = (void __user *)start.cpumask; |
| if (copy_from_user(&cfset_request.mask, umask, len)) |
| return -EFAULT; |
| if (cpumask_empty(&cfset_request.mask)) |
| return -EINVAL; |
| need = cfset_needspace(start.counter_sets); |
| if (put_user(need, &ustart->data_bytes)) |
| ret = -EFAULT; |
| if (ret) |
| goto out; |
| cfset_request.ctrset = start.counter_sets; |
| ret = cfset_all_start(); |
| out: |
| if (ret) |
| cfset_ctrset_clear(); |
| debug_sprintf_event(cf_dbg, 4, "%s sets %#lx need %ld ret %d\n", |
| __func__, cfset_request.ctrset, need, ret); |
| return ret; |
| } |
| |
| /* Entry point to the /dev/hwctr device interface. |
| * The ioctl system call supports three subcommands: |
| * S390_HWCTR_START: Start the specified counter sets on a CPU list. The |
| * counter set keeps running until explicitly stopped. Returns the number |
| * of bytes needed to store the counter values. If another S390_HWCTR_START |
| * ioctl subcommand is called without a previous S390_HWCTR_STOP stop |
| * command, -EBUSY is returned. |
| * S390_HWCTR_READ: Read the counter set values from specified CPU list given |
| * with the S390_HWCTR_START command. |
| * S390_HWCTR_STOP: Stops the counter sets on the CPU list given with the |
| * previous S390_HWCTR_START subcommand. |
| */ |
| static long cfset_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| int ret; |
| |
| get_online_cpus(); |
| mutex_lock(&cfset_ctrset_mutex); |
| switch (cmd) { |
| case S390_HWCTR_START: |
| ret = cfset_ioctl_start(arg); |
| break; |
| case S390_HWCTR_STOP: |
| ret = cfset_ioctl_stop(); |
| break; |
| case S390_HWCTR_READ: |
| ret = cfset_ioctl_read(arg); |
| break; |
| default: |
| ret = -ENOTTY; |
| break; |
| } |
| mutex_unlock(&cfset_ctrset_mutex); |
| put_online_cpus(); |
| return ret; |
| } |
| |
| static const struct file_operations cfset_fops = { |
| .owner = THIS_MODULE, |
| .open = cfset_open, |
| .release = cfset_release, |
| .unlocked_ioctl = cfset_ioctl, |
| .compat_ioctl = cfset_ioctl, |
| .llseek = no_llseek |
| }; |
| |
| static struct miscdevice cfset_dev = { |
| .name = S390_HWCTR_DEVICE, |
| .minor = MISC_DYNAMIC_MINOR, |
| .fops = &cfset_fops, |
| }; |
| |
| int cfset_online_cpu(unsigned int cpu) |
| { |
| struct cfset_call_on_cpu_parm p; |
| |
| mutex_lock(&cfset_ctrset_mutex); |
| if (cfset_request.ctrset) { |
| p.sets = cfset_request.ctrset; |
| cfset_ioctl_on(&p); |
| cpumask_set_cpu(cpu, &cfset_request.mask); |
| } |
| mutex_unlock(&cfset_ctrset_mutex); |
| return 0; |
| } |
| |
| int cfset_offline_cpu(unsigned int cpu) |
| { |
| struct cfset_call_on_cpu_parm p; |
| |
| mutex_lock(&cfset_ctrset_mutex); |
| if (cfset_request.ctrset) { |
| p.sets = cfset_request.ctrset; |
| cfset_ioctl_off(&p); |
| cpumask_clear_cpu(cpu, &cfset_request.mask); |
| } |
| mutex_unlock(&cfset_ctrset_mutex); |
| return 0; |
| } |
| |
| static void cfdiag_read(struct perf_event *event) |
| { |
| debug_sprintf_event(cf_dbg, 3, "%s event %#llx count %ld\n", __func__, |
| event->attr.config, local64_read(&event->count)); |
| } |
| |
| static int get_authctrsets(void) |
| { |
| struct cpu_cf_events *cpuhw; |
| unsigned long auth = 0; |
| enum cpumf_ctr_set i; |
| |
| cpuhw = &get_cpu_var(cpu_cf_events); |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) { |
| if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i]) |
| auth |= cpumf_ctr_ctl[i]; |
| } |
| put_cpu_var(cpu_cf_events); |
| return auth; |
| } |
| |
| /* Setup the event. Test for authorized counter sets and only include counter |
| * sets which are authorized at the time of the setup. Including unauthorized |
| * counter sets result in specification exception (and panic). |
| */ |
| static int cfdiag_event_init2(struct perf_event *event) |
| { |
| struct perf_event_attr *attr = &event->attr; |
| int err = 0; |
| |
| /* Set sample_period to indicate sampling */ |
| event->hw.config = attr->config; |
| event->hw.sample_period = attr->sample_period; |
| local64_set(&event->hw.period_left, event->hw.sample_period); |
| local64_set(&event->count, 0); |
| event->hw.last_period = event->hw.sample_period; |
| |
| /* Add all authorized counter sets to config_base. The |
| * the hardware init function is either called per-cpu or just once |
| * for all CPUS (event->cpu == -1). This depends on the whether |
| * counting is started for all CPUs or on a per workload base where |
| * the perf event moves from one CPU to another CPU. |
| * Checking the authorization on any CPU is fine as the hardware |
| * applies the same authorization settings to all CPUs. |
| */ |
| event->hw.config_base = get_authctrsets(); |
| |
| /* No authorized counter sets, nothing to count/sample */ |
| if (!event->hw.config_base) |
| err = -EINVAL; |
| |
| debug_sprintf_event(cf_dbg, 5, "%s err %d config_base %#lx\n", |
| __func__, err, event->hw.config_base); |
| return err; |
| } |
| |
| static int cfdiag_event_init(struct perf_event *event) |
| { |
| struct perf_event_attr *attr = &event->attr; |
| int err = -ENOENT; |
| |
| if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG || |
| event->attr.type != event->pmu->type) |
| goto out; |
| |
| /* Raw events are used to access counters directly, |
| * hence do not permit excludes. |
| * This event is useless without PERF_SAMPLE_RAW to return counter set |
| * values as raw data. |
| */ |
| if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv || |
| !(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) { |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* Initialize for using the CPU-measurement counter facility */ |
| cpumf_hw_inuse(); |
| event->destroy = hw_perf_event_destroy; |
| |
| err = cfdiag_event_init2(event); |
| if (unlikely(err)) |
| event->destroy(event); |
| out: |
| return err; |
| } |
| |
| /* Create cf_diag/events/CF_DIAG event sysfs file. This counter is used |
| * to collect the complete counter sets for a scheduled process. Target |
| * are complete counter sets attached as raw data to the artificial event. |
| * This results in complete counter sets available when a process is |
| * scheduled. Contains the delta of every counter while the process was |
| * running. |
| */ |
| CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG); |
| |
| static struct attribute *cfdiag_events_attr[] = { |
| CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG), |
| NULL, |
| }; |
| |
| PMU_FORMAT_ATTR(event, "config:0-63"); |
| |
| static struct attribute *cfdiag_format_attr[] = { |
| &format_attr_event.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group cfdiag_events_group = { |
| .name = "events", |
| .attrs = cfdiag_events_attr, |
| }; |
| static struct attribute_group cfdiag_format_group = { |
| .name = "format", |
| .attrs = cfdiag_format_attr, |
| }; |
| static const struct attribute_group *cfdiag_attr_groups[] = { |
| &cfdiag_events_group, |
| &cfdiag_format_group, |
| NULL, |
| }; |
| |
| /* Performance monitoring unit for event CF_DIAG. Since this event |
| * is also started and stopped via the perf_event_open() system call, use |
| * the same event enable/disable call back functions. They do not |
| * have a pointer to the perf_event strcture as first parameter. |
| * |
| * The functions XXX_add, XXX_del, XXX_start and XXX_stop are also common. |
| * Reuse them and distinguish the event (always first parameter) via |
| * 'config' member. |
| */ |
| static struct pmu cf_diag = { |
| .task_ctx_nr = perf_sw_context, |
| .event_init = cfdiag_event_init, |
| .pmu_enable = cpumf_pmu_enable, |
| .pmu_disable = cpumf_pmu_disable, |
| .add = cpumf_pmu_add, |
| .del = cpumf_pmu_del, |
| .start = cpumf_pmu_start, |
| .stop = cpumf_pmu_stop, |
| .read = cfdiag_read, |
| |
| .attr_groups = cfdiag_attr_groups |
| }; |
| |
| /* Calculate memory needed to store all counter sets together with header and |
| * trailer data. This is independent of the counter set authorization which |
| * can vary depending on the configuration. |
| */ |
| static size_t cfdiag_maxsize(struct cpumf_ctr_info *info) |
| { |
| size_t max_size = sizeof(struct cf_trailer_entry); |
| enum cpumf_ctr_set i; |
| |
| for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) { |
| size_t size = cpum_cf_ctrset_size(i, info); |
| |
| if (size) |
| max_size += size * sizeof(u64) + |
| sizeof(struct cf_ctrset_entry); |
| } |
| return max_size; |
| } |
| |
| /* Get the CPU speed, try sampling facility first and CPU attributes second. */ |
| static void cfdiag_get_cpu_speed(void) |
| { |
| if (cpum_sf_avail()) { /* Sampling facility first */ |
| struct hws_qsi_info_block si; |
| |
| memset(&si, 0, sizeof(si)); |
| if (!qsi(&si)) { |
| cfdiag_cpu_speed = si.cpu_speed; |
| return; |
| } |
| } |
| |
| /* Fallback: CPU speed extract static part. Used in case |
| * CPU Measurement Sampling Facility is turned off. |
| */ |
| if (test_facility(34)) { |
| unsigned long mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0); |
| |
| if (mhz != -1UL) |
| cfdiag_cpu_speed = mhz & 0xffffffff; |
| } |
| } |
| |
| static int cfset_init(void) |
| { |
| struct cpumf_ctr_info info; |
| size_t need; |
| int rc; |
| |
| if (qctri(&info)) |
| return -ENODEV; |
| |
| cfdiag_get_cpu_speed(); |
| /* Make sure the counter set data fits into predefined buffer. */ |
| need = cfdiag_maxsize(&info); |
| if (need > sizeof(((struct cpu_cf_events *)0)->start)) { |
| pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n", |
| need); |
| return -ENOMEM; |
| } |
| |
| rc = misc_register(&cfset_dev); |
| if (rc) { |
| pr_err("Registration of /dev/%s failed rc=%i\n", |
| cfset_dev.name, rc); |
| goto out; |
| } |
| |
| rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1); |
| if (rc) { |
| misc_deregister(&cfset_dev); |
| pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n", |
| rc); |
| } |
| out: |
| return rc; |
| } |
| |
| device_initcall(cpumf_pmu_init); |