| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014 Free Electrons |
| * Copyright (C) 2014 Atmel |
| * |
| * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/atmel-hlcdc.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/regmap.h> |
| |
| #define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8) |
| #define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK) |
| #define ATMEL_HLCDC_PWMPOL BIT(4) |
| #define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0) |
| #define ATMEL_HLCDC_PWMPS_MAX 0x6 |
| #define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK) |
| |
| struct atmel_hlcdc_pwm_errata { |
| bool slow_clk_erratum; |
| bool div1_clk_erratum; |
| }; |
| |
| struct atmel_hlcdc_pwm { |
| struct pwm_chip chip; |
| struct atmel_hlcdc *hlcdc; |
| struct clk *cur_clk; |
| const struct atmel_hlcdc_pwm_errata *errata; |
| }; |
| |
| static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct atmel_hlcdc_pwm, chip); |
| } |
| |
| static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); |
| struct atmel_hlcdc *hlcdc = chip->hlcdc; |
| unsigned int status; |
| int ret; |
| |
| if (state->enabled) { |
| struct clk *new_clk = hlcdc->slow_clk; |
| u64 pwmcval = state->duty_cycle * 256; |
| unsigned long clk_freq; |
| u64 clk_period_ns; |
| u32 pwmcfg; |
| int pres; |
| |
| if (!chip->errata || !chip->errata->slow_clk_erratum) { |
| clk_freq = clk_get_rate(new_clk); |
| if (!clk_freq) |
| return -EINVAL; |
| |
| clk_period_ns = (u64)NSEC_PER_SEC * 256; |
| do_div(clk_period_ns, clk_freq); |
| } |
| |
| /* Errata: cannot use slow clk on some IP revisions */ |
| if ((chip->errata && chip->errata->slow_clk_erratum) || |
| clk_period_ns > state->period) { |
| new_clk = hlcdc->sys_clk; |
| clk_freq = clk_get_rate(new_clk); |
| if (!clk_freq) |
| return -EINVAL; |
| |
| clk_period_ns = (u64)NSEC_PER_SEC * 256; |
| do_div(clk_period_ns, clk_freq); |
| } |
| |
| for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) { |
| /* Errata: cannot divide by 1 on some IP revisions */ |
| if (!pres && chip->errata && |
| chip->errata->div1_clk_erratum) |
| continue; |
| |
| if ((clk_period_ns << pres) >= state->period) |
| break; |
| } |
| |
| if (pres > ATMEL_HLCDC_PWMPS_MAX) |
| return -EINVAL; |
| |
| pwmcfg = ATMEL_HLCDC_PWMPS(pres); |
| |
| if (new_clk != chip->cur_clk) { |
| u32 gencfg = 0; |
| int ret; |
| |
| ret = clk_prepare_enable(new_clk); |
| if (ret) |
| return ret; |
| |
| clk_disable_unprepare(chip->cur_clk); |
| chip->cur_clk = new_clk; |
| |
| if (new_clk == hlcdc->sys_clk) |
| gencfg = ATMEL_HLCDC_CLKPWMSEL; |
| |
| ret = regmap_update_bits(hlcdc->regmap, |
| ATMEL_HLCDC_CFG(0), |
| ATMEL_HLCDC_CLKPWMSEL, |
| gencfg); |
| if (ret) |
| return ret; |
| } |
| |
| do_div(pwmcval, state->period); |
| |
| /* |
| * The PWM duty cycle is configurable from 0/256 to 255/256 of |
| * the period cycle. Hence we can't set a duty cycle occupying |
| * the whole period cycle if we're asked to. |
| * Set it to 255 if pwmcval is greater than 256. |
| */ |
| if (pwmcval > 255) |
| pwmcval = 255; |
| |
| pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval); |
| |
| if (state->polarity == PWM_POLARITY_NORMAL) |
| pwmcfg |= ATMEL_HLCDC_PWMPOL; |
| |
| ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6), |
| ATMEL_HLCDC_PWMCVAL_MASK | |
| ATMEL_HLCDC_PWMPS_MASK | |
| ATMEL_HLCDC_PWMPOL, |
| pwmcfg); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, |
| ATMEL_HLCDC_PWM); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR, |
| status, |
| status & ATMEL_HLCDC_PWM, |
| 10, 0); |
| if (ret) |
| return ret; |
| } else { |
| ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, |
| ATMEL_HLCDC_PWM); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR, |
| status, |
| !(status & ATMEL_HLCDC_PWM), |
| 10, 0); |
| if (ret) |
| return ret; |
| |
| clk_disable_unprepare(chip->cur_clk); |
| chip->cur_clk = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops atmel_hlcdc_pwm_ops = { |
| .apply = atmel_hlcdc_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = { |
| .slow_clk_erratum = true, |
| }; |
| |
| static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = { |
| .div1_clk_erratum = true, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int atmel_hlcdc_pwm_suspend(struct device *dev) |
| { |
| struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev); |
| |
| /* Keep the periph clock enabled if the PWM is still running. */ |
| if (pwm_is_enabled(&chip->chip.pwms[0])) |
| clk_disable_unprepare(chip->hlcdc->periph_clk); |
| |
| return 0; |
| } |
| |
| static int atmel_hlcdc_pwm_resume(struct device *dev) |
| { |
| struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev); |
| struct pwm_state state; |
| int ret; |
| |
| pwm_get_state(&chip->chip.pwms[0], &state); |
| |
| /* Re-enable the periph clock it was stopped during suspend. */ |
| if (!state.enabled) { |
| ret = clk_prepare_enable(chip->hlcdc->periph_clk); |
| if (ret) |
| return ret; |
| } |
| |
| return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops, |
| atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume); |
| |
| static const struct of_device_id atmel_hlcdc_dt_ids[] = { |
| { |
| .compatible = "atmel,at91sam9n12-hlcdc", |
| /* 9n12 has same errata as 9x5 HLCDC PWM */ |
| .data = &atmel_hlcdc_pwm_at91sam9x5_errata, |
| }, |
| { |
| .compatible = "atmel,at91sam9x5-hlcdc", |
| .data = &atmel_hlcdc_pwm_at91sam9x5_errata, |
| }, |
| { |
| .compatible = "atmel,sama5d2-hlcdc", |
| }, |
| { |
| .compatible = "atmel,sama5d3-hlcdc", |
| .data = &atmel_hlcdc_pwm_sama5d3_errata, |
| }, |
| { |
| .compatible = "atmel,sama5d4-hlcdc", |
| .data = &atmel_hlcdc_pwm_sama5d3_errata, |
| }, |
| { .compatible = "microchip,sam9x60-hlcdc", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids); |
| |
| static int atmel_hlcdc_pwm_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct device *dev = &pdev->dev; |
| struct atmel_hlcdc_pwm *chip; |
| struct atmel_hlcdc *hlcdc; |
| int ret; |
| |
| hlcdc = dev_get_drvdata(dev->parent); |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| ret = clk_prepare_enable(hlcdc->periph_clk); |
| if (ret) |
| return ret; |
| |
| match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node); |
| if (match) |
| chip->errata = match->data; |
| |
| chip->hlcdc = hlcdc; |
| chip->chip.ops = &atmel_hlcdc_pwm_ops; |
| chip->chip.dev = dev; |
| chip->chip.base = -1; |
| chip->chip.npwm = 1; |
| chip->chip.of_xlate = of_pwm_xlate_with_flags; |
| chip->chip.of_pwm_n_cells = 3; |
| |
| ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED); |
| if (ret) { |
| clk_disable_unprepare(hlcdc->periph_clk); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, chip); |
| |
| return 0; |
| } |
| |
| static int atmel_hlcdc_pwm_remove(struct platform_device *pdev) |
| { |
| struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = pwmchip_remove(&chip->chip); |
| if (ret) |
| return ret; |
| |
| clk_disable_unprepare(chip->hlcdc->periph_clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = { |
| { .compatible = "atmel,hlcdc-pwm" }, |
| { /* sentinel */ }, |
| }; |
| |
| static struct platform_driver atmel_hlcdc_pwm_driver = { |
| .driver = { |
| .name = "atmel-hlcdc-pwm", |
| .of_match_table = atmel_hlcdc_pwm_dt_ids, |
| .pm = &atmel_hlcdc_pwm_pm_ops, |
| }, |
| .probe = atmel_hlcdc_pwm_probe, |
| .remove = atmel_hlcdc_pwm_remove, |
| }; |
| module_platform_driver(atmel_hlcdc_pwm_driver); |
| |
| MODULE_ALIAS("platform:atmel-hlcdc-pwm"); |
| MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); |
| MODULE_DESCRIPTION("Atmel HLCDC PWM driver"); |
| MODULE_LICENSE("GPL v2"); |