| /* |
| * Copyright © 2012 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> |
| * |
| */ |
| |
| #include <linux/cpufreq.h> |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| #include "../../../platform/x86/intel_ips.h" |
| #include <linux/module.h> |
| |
| /** |
| * RC6 is a special power stage which allows the GPU to enter an very |
| * low-voltage mode when idle, using down to 0V while at this stage. This |
| * stage is entered automatically when the GPU is idle when RC6 support is |
| * enabled, and as soon as new workload arises GPU wakes up automatically as well. |
| * |
| * There are different RC6 modes available in Intel GPU, which differentiate |
| * among each other with the latency required to enter and leave RC6 and |
| * voltage consumed by the GPU in different states. |
| * |
| * The combination of the following flags define which states GPU is allowed |
| * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and |
| * RC6pp is deepest RC6. Their support by hardware varies according to the |
| * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one |
| * which brings the most power savings; deeper states save more power, but |
| * require higher latency to switch to and wake up. |
| */ |
| #define INTEL_RC6_ENABLE (1<<0) |
| #define INTEL_RC6p_ENABLE (1<<1) |
| #define INTEL_RC6pp_ENABLE (1<<2) |
| |
| static void gen9_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* WaEnableLbsSlaRetryTimerDecrement:skl */ |
| I915_WRITE(BDW_SCRATCH1, I915_READ(BDW_SCRATCH1) | |
| GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE); |
| } |
| |
| static void skl_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| gen9_init_clock_gating(dev); |
| |
| if (INTEL_REVID(dev) == SKL_REVID_A0) { |
| /* |
| * WaDisableSDEUnitClockGating:skl |
| * WaSetGAPSunitClckGateDisable:skl |
| */ |
| I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | |
| GEN8_GAPSUNIT_CLOCK_GATE_DISABLE | |
| GEN8_SDEUNIT_CLOCK_GATE_DISABLE); |
| } |
| |
| if (INTEL_REVID(dev) <= SKL_REVID_D0) { |
| /* WaDisableHDCInvalidation:skl */ |
| I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | |
| BDW_DISABLE_HDC_INVALIDATION); |
| |
| /* WaDisableChickenBitTSGBarrierAckForFFSliceCS:skl */ |
| I915_WRITE(FF_SLICE_CS_CHICKEN2, |
| I915_READ(FF_SLICE_CS_CHICKEN2) | |
| GEN9_TSG_BARRIER_ACK_DISABLE); |
| } |
| |
| if (INTEL_REVID(dev) <= SKL_REVID_E0) |
| /* WaDisableLSQCROPERFforOCL:skl */ |
| I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | |
| GEN8_LQSC_RO_PERF_DIS); |
| } |
| |
| static void i915_pineview_get_mem_freq(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 tmp; |
| |
| tmp = I915_READ(CLKCFG); |
| |
| switch (tmp & CLKCFG_FSB_MASK) { |
| case CLKCFG_FSB_533: |
| dev_priv->fsb_freq = 533; /* 133*4 */ |
| break; |
| case CLKCFG_FSB_800: |
| dev_priv->fsb_freq = 800; /* 200*4 */ |
| break; |
| case CLKCFG_FSB_667: |
| dev_priv->fsb_freq = 667; /* 167*4 */ |
| break; |
| case CLKCFG_FSB_400: |
| dev_priv->fsb_freq = 400; /* 100*4 */ |
| break; |
| } |
| |
| switch (tmp & CLKCFG_MEM_MASK) { |
| case CLKCFG_MEM_533: |
| dev_priv->mem_freq = 533; |
| break; |
| case CLKCFG_MEM_667: |
| dev_priv->mem_freq = 667; |
| break; |
| case CLKCFG_MEM_800: |
| dev_priv->mem_freq = 800; |
| break; |
| } |
| |
| /* detect pineview DDR3 setting */ |
| tmp = I915_READ(CSHRDDR3CTL); |
| dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0; |
| } |
| |
| static void i915_ironlake_get_mem_freq(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u16 ddrpll, csipll; |
| |
| ddrpll = I915_READ16(DDRMPLL1); |
| csipll = I915_READ16(CSIPLL0); |
| |
| switch (ddrpll & 0xff) { |
| case 0xc: |
| dev_priv->mem_freq = 800; |
| break; |
| case 0x10: |
| dev_priv->mem_freq = 1066; |
| break; |
| case 0x14: |
| dev_priv->mem_freq = 1333; |
| break; |
| case 0x18: |
| dev_priv->mem_freq = 1600; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n", |
| ddrpll & 0xff); |
| dev_priv->mem_freq = 0; |
| break; |
| } |
| |
| dev_priv->ips.r_t = dev_priv->mem_freq; |
| |
| switch (csipll & 0x3ff) { |
| case 0x00c: |
| dev_priv->fsb_freq = 3200; |
| break; |
| case 0x00e: |
| dev_priv->fsb_freq = 3733; |
| break; |
| case 0x010: |
| dev_priv->fsb_freq = 4266; |
| break; |
| case 0x012: |
| dev_priv->fsb_freq = 4800; |
| break; |
| case 0x014: |
| dev_priv->fsb_freq = 5333; |
| break; |
| case 0x016: |
| dev_priv->fsb_freq = 5866; |
| break; |
| case 0x018: |
| dev_priv->fsb_freq = 6400; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n", |
| csipll & 0x3ff); |
| dev_priv->fsb_freq = 0; |
| break; |
| } |
| |
| if (dev_priv->fsb_freq == 3200) { |
| dev_priv->ips.c_m = 0; |
| } else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) { |
| dev_priv->ips.c_m = 1; |
| } else { |
| dev_priv->ips.c_m = 2; |
| } |
| } |
| |
| static const struct cxsr_latency cxsr_latency_table[] = { |
| {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ |
| {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ |
| {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ |
| {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */ |
| {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */ |
| |
| {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ |
| {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ |
| {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ |
| {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */ |
| {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */ |
| |
| {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ |
| {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ |
| {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ |
| {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */ |
| {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */ |
| |
| {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ |
| {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ |
| {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ |
| {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */ |
| {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */ |
| |
| {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ |
| {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ |
| {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ |
| {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */ |
| {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */ |
| |
| {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ |
| {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ |
| {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ |
| {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */ |
| {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */ |
| }; |
| |
| static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, |
| int is_ddr3, |
| int fsb, |
| int mem) |
| { |
| const struct cxsr_latency *latency; |
| int i; |
| |
| if (fsb == 0 || mem == 0) |
| return NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { |
| latency = &cxsr_latency_table[i]; |
| if (is_desktop == latency->is_desktop && |
| is_ddr3 == latency->is_ddr3 && |
| fsb == latency->fsb_freq && mem == latency->mem_freq) |
| return latency; |
| } |
| |
| DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); |
| |
| return NULL; |
| } |
| |
| static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) |
| { |
| u32 val; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); |
| if (enable) |
| val |= DSP_MAXFIFO_PM5_ENABLE; |
| else |
| val &= ~DSP_MAXFIFO_PM5_ENABLE; |
| vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| u32 val; |
| |
| if (IS_VALLEYVIEW(dev)) { |
| I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0); |
| if (IS_CHERRYVIEW(dev)) |
| chv_set_memory_pm5(dev_priv, enable); |
| } else if (IS_G4X(dev) || IS_CRESTLINE(dev)) { |
| I915_WRITE(FW_BLC_SELF, enable ? FW_BLC_SELF_EN : 0); |
| } else if (IS_PINEVIEW(dev)) { |
| val = I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN; |
| val |= enable ? PINEVIEW_SELF_REFRESH_EN : 0; |
| I915_WRITE(DSPFW3, val); |
| } else if (IS_I945G(dev) || IS_I945GM(dev)) { |
| val = enable ? _MASKED_BIT_ENABLE(FW_BLC_SELF_EN) : |
| _MASKED_BIT_DISABLE(FW_BLC_SELF_EN); |
| I915_WRITE(FW_BLC_SELF, val); |
| } else if (IS_I915GM(dev)) { |
| val = enable ? _MASKED_BIT_ENABLE(INSTPM_SELF_EN) : |
| _MASKED_BIT_DISABLE(INSTPM_SELF_EN); |
| I915_WRITE(INSTPM, val); |
| } else { |
| return; |
| } |
| |
| DRM_DEBUG_KMS("memory self-refresh is %s\n", |
| enable ? "enabled" : "disabled"); |
| } |
| |
| /* |
| * Latency for FIFO fetches is dependent on several factors: |
| * - memory configuration (speed, channels) |
| * - chipset |
| * - current MCH state |
| * It can be fairly high in some situations, so here we assume a fairly |
| * pessimal value. It's a tradeoff between extra memory fetches (if we |
| * set this value too high, the FIFO will fetch frequently to stay full) |
| * and power consumption (set it too low to save power and we might see |
| * FIFO underruns and display "flicker"). |
| * |
| * A value of 5us seems to be a good balance; safe for very low end |
| * platforms but not overly aggressive on lower latency configs. |
| */ |
| static const int pessimal_latency_ns = 5000; |
| |
| #define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \ |
| ((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8)) |
| |
| static int vlv_get_fifo_size(struct drm_device *dev, |
| enum pipe pipe, int plane) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int sprite0_start, sprite1_start, size; |
| |
| switch (pipe) { |
| uint32_t dsparb, dsparb2, dsparb3; |
| case PIPE_A: |
| dsparb = I915_READ(DSPARB); |
| dsparb2 = I915_READ(DSPARB2); |
| sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0); |
| sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4); |
| break; |
| case PIPE_B: |
| dsparb = I915_READ(DSPARB); |
| dsparb2 = I915_READ(DSPARB2); |
| sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8); |
| sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12); |
| break; |
| case PIPE_C: |
| dsparb2 = I915_READ(DSPARB2); |
| dsparb3 = I915_READ(DSPARB3); |
| sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16); |
| sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (plane) { |
| case 0: |
| size = sprite0_start; |
| break; |
| case 1: |
| size = sprite1_start - sprite0_start; |
| break; |
| case 2: |
| size = 512 - 1 - sprite1_start; |
| break; |
| default: |
| return 0; |
| } |
| |
| DRM_DEBUG_KMS("Pipe %c %s %c FIFO size: %d\n", |
| pipe_name(pipe), plane == 0 ? "primary" : "sprite", |
| plane == 0 ? plane_name(pipe) : sprite_name(pipe, plane - 1), |
| size); |
| |
| return size; |
| } |
| |
| static int i9xx_get_fifo_size(struct drm_device *dev, int plane) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dsparb = I915_READ(DSPARB); |
| int size; |
| |
| size = dsparb & 0x7f; |
| if (plane) |
| size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size; |
| |
| DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, |
| plane ? "B" : "A", size); |
| |
| return size; |
| } |
| |
| static int i830_get_fifo_size(struct drm_device *dev, int plane) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dsparb = I915_READ(DSPARB); |
| int size; |
| |
| size = dsparb & 0x1ff; |
| if (plane) |
| size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size; |
| size >>= 1; /* Convert to cachelines */ |
| |
| DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, |
| plane ? "B" : "A", size); |
| |
| return size; |
| } |
| |
| static int i845_get_fifo_size(struct drm_device *dev, int plane) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dsparb = I915_READ(DSPARB); |
| int size; |
| |
| size = dsparb & 0x7f; |
| size >>= 2; /* Convert to cachelines */ |
| |
| DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, |
| plane ? "B" : "A", |
| size); |
| |
| return size; |
| } |
| |
| /* Pineview has different values for various configs */ |
| static const struct intel_watermark_params pineview_display_wm = { |
| .fifo_size = PINEVIEW_DISPLAY_FIFO, |
| .max_wm = PINEVIEW_MAX_WM, |
| .default_wm = PINEVIEW_DFT_WM, |
| .guard_size = PINEVIEW_GUARD_WM, |
| .cacheline_size = PINEVIEW_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params pineview_display_hplloff_wm = { |
| .fifo_size = PINEVIEW_DISPLAY_FIFO, |
| .max_wm = PINEVIEW_MAX_WM, |
| .default_wm = PINEVIEW_DFT_HPLLOFF_WM, |
| .guard_size = PINEVIEW_GUARD_WM, |
| .cacheline_size = PINEVIEW_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params pineview_cursor_wm = { |
| .fifo_size = PINEVIEW_CURSOR_FIFO, |
| .max_wm = PINEVIEW_CURSOR_MAX_WM, |
| .default_wm = PINEVIEW_CURSOR_DFT_WM, |
| .guard_size = PINEVIEW_CURSOR_GUARD_WM, |
| .cacheline_size = PINEVIEW_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params pineview_cursor_hplloff_wm = { |
| .fifo_size = PINEVIEW_CURSOR_FIFO, |
| .max_wm = PINEVIEW_CURSOR_MAX_WM, |
| .default_wm = PINEVIEW_CURSOR_DFT_WM, |
| .guard_size = PINEVIEW_CURSOR_GUARD_WM, |
| .cacheline_size = PINEVIEW_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params g4x_wm_info = { |
| .fifo_size = G4X_FIFO_SIZE, |
| .max_wm = G4X_MAX_WM, |
| .default_wm = G4X_MAX_WM, |
| .guard_size = 2, |
| .cacheline_size = G4X_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params g4x_cursor_wm_info = { |
| .fifo_size = I965_CURSOR_FIFO, |
| .max_wm = I965_CURSOR_MAX_WM, |
| .default_wm = I965_CURSOR_DFT_WM, |
| .guard_size = 2, |
| .cacheline_size = G4X_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params valleyview_wm_info = { |
| .fifo_size = VALLEYVIEW_FIFO_SIZE, |
| .max_wm = VALLEYVIEW_MAX_WM, |
| .default_wm = VALLEYVIEW_MAX_WM, |
| .guard_size = 2, |
| .cacheline_size = G4X_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params valleyview_cursor_wm_info = { |
| .fifo_size = I965_CURSOR_FIFO, |
| .max_wm = VALLEYVIEW_CURSOR_MAX_WM, |
| .default_wm = I965_CURSOR_DFT_WM, |
| .guard_size = 2, |
| .cacheline_size = G4X_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i965_cursor_wm_info = { |
| .fifo_size = I965_CURSOR_FIFO, |
| .max_wm = I965_CURSOR_MAX_WM, |
| .default_wm = I965_CURSOR_DFT_WM, |
| .guard_size = 2, |
| .cacheline_size = I915_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i945_wm_info = { |
| .fifo_size = I945_FIFO_SIZE, |
| .max_wm = I915_MAX_WM, |
| .default_wm = 1, |
| .guard_size = 2, |
| .cacheline_size = I915_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i915_wm_info = { |
| .fifo_size = I915_FIFO_SIZE, |
| .max_wm = I915_MAX_WM, |
| .default_wm = 1, |
| .guard_size = 2, |
| .cacheline_size = I915_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i830_a_wm_info = { |
| .fifo_size = I855GM_FIFO_SIZE, |
| .max_wm = I915_MAX_WM, |
| .default_wm = 1, |
| .guard_size = 2, |
| .cacheline_size = I830_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i830_bc_wm_info = { |
| .fifo_size = I855GM_FIFO_SIZE, |
| .max_wm = I915_MAX_WM/2, |
| .default_wm = 1, |
| .guard_size = 2, |
| .cacheline_size = I830_FIFO_LINE_SIZE, |
| }; |
| static const struct intel_watermark_params i845_wm_info = { |
| .fifo_size = I830_FIFO_SIZE, |
| .max_wm = I915_MAX_WM, |
| .default_wm = 1, |
| .guard_size = 2, |
| .cacheline_size = I830_FIFO_LINE_SIZE, |
| }; |
| |
| /** |
| * intel_calculate_wm - calculate watermark level |
| * @clock_in_khz: pixel clock |
| * @wm: chip FIFO params |
| * @pixel_size: display pixel size |
| * @latency_ns: memory latency for the platform |
| * |
| * Calculate the watermark level (the level at which the display plane will |
| * start fetching from memory again). Each chip has a different display |
| * FIFO size and allocation, so the caller needs to figure that out and pass |
| * in the correct intel_watermark_params structure. |
| * |
| * As the pixel clock runs, the FIFO will be drained at a rate that depends |
| * on the pixel size. When it reaches the watermark level, it'll start |
| * fetching FIFO line sized based chunks from memory until the FIFO fills |
| * past the watermark point. If the FIFO drains completely, a FIFO underrun |
| * will occur, and a display engine hang could result. |
| */ |
| static unsigned long intel_calculate_wm(unsigned long clock_in_khz, |
| const struct intel_watermark_params *wm, |
| int fifo_size, |
| int pixel_size, |
| unsigned long latency_ns) |
| { |
| long entries_required, wm_size; |
| |
| /* |
| * Note: we need to make sure we don't overflow for various clock & |
| * latency values. |
| * clocks go from a few thousand to several hundred thousand. |
| * latency is usually a few thousand |
| */ |
| entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) / |
| 1000; |
| entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size); |
| |
| DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required); |
| |
| wm_size = fifo_size - (entries_required + wm->guard_size); |
| |
| DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size); |
| |
| /* Don't promote wm_size to unsigned... */ |
| if (wm_size > (long)wm->max_wm) |
| wm_size = wm->max_wm; |
| if (wm_size <= 0) |
| wm_size = wm->default_wm; |
| |
| /* |
| * Bspec seems to indicate that the value shouldn't be lower than |
| * 'burst size + 1'. Certainly 830 is quite unhappy with low values. |
| * Lets go for 8 which is the burst size since certain platforms |
| * already use a hardcoded 8 (which is what the spec says should be |
| * done). |
| */ |
| if (wm_size <= 8) |
| wm_size = 8; |
| |
| return wm_size; |
| } |
| |
| static struct drm_crtc *single_enabled_crtc(struct drm_device *dev) |
| { |
| struct drm_crtc *crtc, *enabled = NULL; |
| |
| for_each_crtc(dev, crtc) { |
| if (intel_crtc_active(crtc)) { |
| if (enabled) |
| return NULL; |
| enabled = crtc; |
| } |
| } |
| |
| return enabled; |
| } |
| |
| static void pineview_update_wm(struct drm_crtc *unused_crtc) |
| { |
| struct drm_device *dev = unused_crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| const struct cxsr_latency *latency; |
| u32 reg; |
| unsigned long wm; |
| |
| latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, |
| dev_priv->fsb_freq, dev_priv->mem_freq); |
| if (!latency) { |
| DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); |
| intel_set_memory_cxsr(dev_priv, false); |
| return; |
| } |
| |
| crtc = single_enabled_crtc(dev); |
| if (crtc) { |
| const struct drm_display_mode *adjusted_mode; |
| int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8; |
| int clock; |
| |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| clock = adjusted_mode->crtc_clock; |
| |
| /* Display SR */ |
| wm = intel_calculate_wm(clock, &pineview_display_wm, |
| pineview_display_wm.fifo_size, |
| pixel_size, latency->display_sr); |
| reg = I915_READ(DSPFW1); |
| reg &= ~DSPFW_SR_MASK; |
| reg |= wm << DSPFW_SR_SHIFT; |
| I915_WRITE(DSPFW1, reg); |
| DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg); |
| |
| /* cursor SR */ |
| wm = intel_calculate_wm(clock, &pineview_cursor_wm, |
| pineview_display_wm.fifo_size, |
| pixel_size, latency->cursor_sr); |
| reg = I915_READ(DSPFW3); |
| reg &= ~DSPFW_CURSOR_SR_MASK; |
| reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT; |
| I915_WRITE(DSPFW3, reg); |
| |
| /* Display HPLL off SR */ |
| wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm, |
| pineview_display_hplloff_wm.fifo_size, |
| pixel_size, latency->display_hpll_disable); |
| reg = I915_READ(DSPFW3); |
| reg &= ~DSPFW_HPLL_SR_MASK; |
| reg |= wm & DSPFW_HPLL_SR_MASK; |
| I915_WRITE(DSPFW3, reg); |
| |
| /* cursor HPLL off SR */ |
| wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm, |
| pineview_display_hplloff_wm.fifo_size, |
| pixel_size, latency->cursor_hpll_disable); |
| reg = I915_READ(DSPFW3); |
| reg &= ~DSPFW_HPLL_CURSOR_MASK; |
| reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT; |
| I915_WRITE(DSPFW3, reg); |
| DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg); |
| |
| intel_set_memory_cxsr(dev_priv, true); |
| } else { |
| intel_set_memory_cxsr(dev_priv, false); |
| } |
| } |
| |
| static bool g4x_compute_wm0(struct drm_device *dev, |
| int plane, |
| const struct intel_watermark_params *display, |
| int display_latency_ns, |
| const struct intel_watermark_params *cursor, |
| int cursor_latency_ns, |
| int *plane_wm, |
| int *cursor_wm) |
| { |
| struct drm_crtc *crtc; |
| const struct drm_display_mode *adjusted_mode; |
| int htotal, hdisplay, clock, pixel_size; |
| int line_time_us, line_count; |
| int entries, tlb_miss; |
| |
| crtc = intel_get_crtc_for_plane(dev, plane); |
| if (!intel_crtc_active(crtc)) { |
| *cursor_wm = cursor->guard_size; |
| *plane_wm = display->guard_size; |
| return false; |
| } |
| |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| clock = adjusted_mode->crtc_clock; |
| htotal = adjusted_mode->crtc_htotal; |
| hdisplay = to_intel_crtc(crtc)->config->pipe_src_w; |
| pixel_size = crtc->primary->state->fb->bits_per_pixel / 8; |
| |
| /* Use the small buffer method to calculate plane watermark */ |
| entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000; |
| tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8; |
| if (tlb_miss > 0) |
| entries += tlb_miss; |
| entries = DIV_ROUND_UP(entries, display->cacheline_size); |
| *plane_wm = entries + display->guard_size; |
| if (*plane_wm > (int)display->max_wm) |
| *plane_wm = display->max_wm; |
| |
| /* Use the large buffer method to calculate cursor watermark */ |
| line_time_us = max(htotal * 1000 / clock, 1); |
| line_count = (cursor_latency_ns / line_time_us + 1000) / 1000; |
| entries = line_count * crtc->cursor->state->crtc_w * pixel_size; |
| tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8; |
| if (tlb_miss > 0) |
| entries += tlb_miss; |
| entries = DIV_ROUND_UP(entries, cursor->cacheline_size); |
| *cursor_wm = entries + cursor->guard_size; |
| if (*cursor_wm > (int)cursor->max_wm) |
| *cursor_wm = (int)cursor->max_wm; |
| |
| return true; |
| } |
| |
| /* |
| * Check the wm result. |
| * |
| * If any calculated watermark values is larger than the maximum value that |
| * can be programmed into the associated watermark register, that watermark |
| * must be disabled. |
| */ |
| static bool g4x_check_srwm(struct drm_device *dev, |
| int display_wm, int cursor_wm, |
| const struct intel_watermark_params *display, |
| const struct intel_watermark_params *cursor) |
| { |
| DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n", |
| display_wm, cursor_wm); |
| |
| if (display_wm > display->max_wm) { |
| DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n", |
| display_wm, display->max_wm); |
| return false; |
| } |
| |
| if (cursor_wm > cursor->max_wm) { |
| DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n", |
| cursor_wm, cursor->max_wm); |
| return false; |
| } |
| |
| if (!(display_wm || cursor_wm)) { |
| DRM_DEBUG_KMS("SR latency is 0, disabling\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool g4x_compute_srwm(struct drm_device *dev, |
| int plane, |
| int latency_ns, |
| const struct intel_watermark_params *display, |
| const struct intel_watermark_params *cursor, |
| int *display_wm, int *cursor_wm) |
| { |
| struct drm_crtc *crtc; |
| const struct drm_display_mode *adjusted_mode; |
| int hdisplay, htotal, pixel_size, clock; |
| unsigned long line_time_us; |
| int line_count, line_size; |
| int small, large; |
| int entries; |
| |
| if (!latency_ns) { |
| *display_wm = *cursor_wm = 0; |
| return false; |
| } |
| |
| crtc = intel_get_crtc_for_plane(dev, plane); |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| clock = adjusted_mode->crtc_clock; |
| htotal = adjusted_mode->crtc_htotal; |
| hdisplay = to_intel_crtc(crtc)->config->pipe_src_w; |
| pixel_size = crtc->primary->state->fb->bits_per_pixel / 8; |
| |
| line_time_us = max(htotal * 1000 / clock, 1); |
| line_count = (latency_ns / line_time_us + 1000) / 1000; |
| line_size = hdisplay * pixel_size; |
| |
| /* Use the minimum of the small and large buffer method for primary */ |
| small = ((clock * pixel_size / 1000) * latency_ns) / 1000; |
| large = line_count * line_size; |
| |
| entries = DIV_ROUND_UP(min(small, large), display->cacheline_size); |
| *display_wm = entries + display->guard_size; |
| |
| /* calculate the self-refresh watermark for display cursor */ |
| entries = line_count * pixel_size * crtc->cursor->state->crtc_w; |
| entries = DIV_ROUND_UP(entries, cursor->cacheline_size); |
| *cursor_wm = entries + cursor->guard_size; |
| |
| return g4x_check_srwm(dev, |
| *display_wm, *cursor_wm, |
| display, cursor); |
| } |
| |
| static void vlv_write_wm_values(struct intel_crtc *crtc, |
| const struct vlv_wm_values *wm) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| I915_WRITE(VLV_DDL(pipe), |
| (wm->ddl[pipe].cursor << DDL_CURSOR_SHIFT) | |
| (wm->ddl[pipe].sprite[1] << DDL_SPRITE_SHIFT(1)) | |
| (wm->ddl[pipe].sprite[0] << DDL_SPRITE_SHIFT(0)) | |
| (wm->ddl[pipe].primary << DDL_PLANE_SHIFT)); |
| |
| I915_WRITE(DSPFW1, |
| ((wm->sr.plane << DSPFW_SR_SHIFT) & DSPFW_SR_MASK) | |
| ((wm->pipe[PIPE_B].cursor << DSPFW_CURSORB_SHIFT) & DSPFW_CURSORB_MASK) | |
| ((wm->pipe[PIPE_B].primary << DSPFW_PLANEB_SHIFT) & DSPFW_PLANEB_MASK_VLV) | |
| ((wm->pipe[PIPE_A].primary << DSPFW_PLANEA_SHIFT) & DSPFW_PLANEA_MASK_VLV)); |
| I915_WRITE(DSPFW2, |
| ((wm->pipe[PIPE_A].sprite[1] << DSPFW_SPRITEB_SHIFT) & DSPFW_SPRITEB_MASK_VLV) | |
| ((wm->pipe[PIPE_A].cursor << DSPFW_CURSORA_SHIFT) & DSPFW_CURSORA_MASK) | |
| ((wm->pipe[PIPE_A].sprite[0] << DSPFW_SPRITEA_SHIFT) & DSPFW_SPRITEA_MASK_VLV)); |
| I915_WRITE(DSPFW3, |
| ((wm->sr.cursor << DSPFW_CURSOR_SR_SHIFT) & DSPFW_CURSOR_SR_MASK)); |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| I915_WRITE(DSPFW7_CHV, |
| ((wm->pipe[PIPE_B].sprite[1] << DSPFW_SPRITED_SHIFT) & DSPFW_SPRITED_MASK) | |
| ((wm->pipe[PIPE_B].sprite[0] << DSPFW_SPRITEC_SHIFT) & DSPFW_SPRITEC_MASK)); |
| I915_WRITE(DSPFW8_CHV, |
| ((wm->pipe[PIPE_C].sprite[1] << DSPFW_SPRITEF_SHIFT) & DSPFW_SPRITEF_MASK) | |
| ((wm->pipe[PIPE_C].sprite[0] << DSPFW_SPRITEE_SHIFT) & DSPFW_SPRITEE_MASK)); |
| I915_WRITE(DSPFW9_CHV, |
| ((wm->pipe[PIPE_C].primary << DSPFW_PLANEC_SHIFT) & DSPFW_PLANEC_MASK) | |
| ((wm->pipe[PIPE_C].cursor << DSPFW_CURSORC_SHIFT) & DSPFW_CURSORC_MASK)); |
| I915_WRITE(DSPHOWM, |
| (((wm->sr.plane >> 9) << DSPFW_SR_HI_SHIFT) & DSPFW_SR_HI_MASK) | |
| (((wm->pipe[PIPE_C].sprite[1] >> 8) << DSPFW_SPRITEF_HI_SHIFT) & DSPFW_SPRITEF_HI_MASK) | |
| (((wm->pipe[PIPE_C].sprite[0] >> 8) << DSPFW_SPRITEE_HI_SHIFT) & DSPFW_SPRITEE_HI_MASK) | |
| (((wm->pipe[PIPE_C].primary >> 8) << DSPFW_PLANEC_HI_SHIFT) & DSPFW_PLANEC_HI_MASK) | |
| (((wm->pipe[PIPE_B].sprite[1] >> 8) << DSPFW_SPRITED_HI_SHIFT) & DSPFW_SPRITED_HI_MASK) | |
| (((wm->pipe[PIPE_B].sprite[0] >> 8) << DSPFW_SPRITEC_HI_SHIFT) & DSPFW_SPRITEC_HI_MASK) | |
| (((wm->pipe[PIPE_B].primary >> 8) << DSPFW_PLANEB_HI_SHIFT) & DSPFW_PLANEB_HI_MASK) | |
| (((wm->pipe[PIPE_A].sprite[1] >> 8) << DSPFW_SPRITEB_HI_SHIFT) & DSPFW_SPRITEB_HI_MASK) | |
| (((wm->pipe[PIPE_A].sprite[0] >> 8) << DSPFW_SPRITEA_HI_SHIFT) & DSPFW_SPRITEA_HI_MASK) | |
| (((wm->pipe[PIPE_A].primary >> 8) << DSPFW_PLANEA_HI_SHIFT) & DSPFW_PLANEA_HI_MASK)); |
| } else { |
| I915_WRITE(DSPFW7, |
| ((wm->pipe[PIPE_B].sprite[1] << DSPFW_SPRITED_SHIFT) & DSPFW_SPRITED_MASK) | |
| ((wm->pipe[PIPE_B].sprite[0] << DSPFW_SPRITEC_SHIFT) & DSPFW_SPRITEC_MASK)); |
| I915_WRITE(DSPHOWM, |
| (((wm->sr.plane >> 9) << DSPFW_SR_HI_SHIFT) & DSPFW_SR_HI_MASK) | |
| (((wm->pipe[PIPE_B].sprite[1] >> 8) << DSPFW_SPRITED_HI_SHIFT) & DSPFW_SPRITED_HI_MASK) | |
| (((wm->pipe[PIPE_B].sprite[0] >> 8) << DSPFW_SPRITEC_HI_SHIFT) & DSPFW_SPRITEC_HI_MASK) | |
| (((wm->pipe[PIPE_B].primary >> 8) << DSPFW_PLANEB_HI_SHIFT) & DSPFW_PLANEB_HI_MASK) | |
| (((wm->pipe[PIPE_A].sprite[1] >> 8) << DSPFW_SPRITEB_HI_SHIFT) & DSPFW_SPRITEB_HI_MASK) | |
| (((wm->pipe[PIPE_A].sprite[0] >> 8) << DSPFW_SPRITEA_HI_SHIFT) & DSPFW_SPRITEA_HI_MASK) | |
| (((wm->pipe[PIPE_A].primary >> 8) << DSPFW_PLANEA_HI_SHIFT) & DSPFW_PLANEA_HI_MASK)); |
| } |
| |
| POSTING_READ(DSPFW1); |
| |
| dev_priv->wm.vlv = *wm; |
| } |
| |
| static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc, |
| struct drm_plane *plane) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int entries, prec_mult, drain_latency, pixel_size; |
| int clock = intel_crtc->config->base.adjusted_mode.crtc_clock; |
| const int high_precision = IS_CHERRYVIEW(dev) ? 16 : 64; |
| |
| /* |
| * FIXME the plane might have an fb |
| * but be invisible (eg. due to clipping) |
| */ |
| if (!intel_crtc->active || !plane->state->fb) |
| return 0; |
| |
| if (WARN(clock == 0, "Pixel clock is zero!\n")) |
| return 0; |
| |
| pixel_size = drm_format_plane_cpp(plane->state->fb->pixel_format, 0); |
| |
| if (WARN(pixel_size == 0, "Pixel size is zero!\n")) |
| return 0; |
| |
| entries = DIV_ROUND_UP(clock, 1000) * pixel_size; |
| |
| prec_mult = high_precision; |
| drain_latency = 64 * prec_mult * 4 / entries; |
| |
| if (drain_latency > DRAIN_LATENCY_MASK) { |
| prec_mult /= 2; |
| drain_latency = 64 * prec_mult * 4 / entries; |
| } |
| |
| if (drain_latency > DRAIN_LATENCY_MASK) |
| drain_latency = DRAIN_LATENCY_MASK; |
| |
| return drain_latency | (prec_mult == high_precision ? |
| DDL_PRECISION_HIGH : DDL_PRECISION_LOW); |
| } |
| |
| static int vlv_compute_wm(struct intel_crtc *crtc, |
| struct intel_plane *plane, |
| int fifo_size) |
| { |
| int clock, entries, pixel_size; |
| |
| /* |
| * FIXME the plane might have an fb |
| * but be invisible (eg. due to clipping) |
| */ |
| if (!crtc->active || !plane->base.state->fb) |
| return 0; |
| |
| pixel_size = drm_format_plane_cpp(plane->base.state->fb->pixel_format, 0); |
| clock = crtc->config->base.adjusted_mode.crtc_clock; |
| |
| entries = DIV_ROUND_UP(clock, 1000) * pixel_size; |
| |
| /* |
| * Set up the watermark such that we don't start issuing memory |
| * requests until we are within PND's max deadline value (256us). |
| * Idea being to be idle as long as possible while still taking |
| * advatange of PND's deadline scheduling. The limit of 8 |
| * cachelines (used when the FIFO will anyway drain in less time |
| * than 256us) should match what we would be done if trickle |
| * feed were enabled. |
| */ |
| return fifo_size - clamp(DIV_ROUND_UP(256 * entries, 64), 0, fifo_size - 8); |
| } |
| |
| static bool vlv_compute_sr_wm(struct drm_device *dev, |
| struct vlv_wm_values *wm) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct drm_crtc *crtc; |
| enum pipe pipe = INVALID_PIPE; |
| int num_planes = 0; |
| int fifo_size = 0; |
| struct intel_plane *plane; |
| |
| wm->sr.cursor = wm->sr.plane = 0; |
| |
| crtc = single_enabled_crtc(dev); |
| /* maxfifo not supported on pipe C */ |
| if (crtc && to_intel_crtc(crtc)->pipe != PIPE_C) { |
| pipe = to_intel_crtc(crtc)->pipe; |
| num_planes = !!wm->pipe[pipe].primary + |
| !!wm->pipe[pipe].sprite[0] + |
| !!wm->pipe[pipe].sprite[1]; |
| fifo_size = INTEL_INFO(dev_priv)->num_pipes * 512 - 1; |
| } |
| |
| if (fifo_size == 0 || num_planes > 1) |
| return false; |
| |
| wm->sr.cursor = vlv_compute_wm(to_intel_crtc(crtc), |
| to_intel_plane(crtc->cursor), 0x3f); |
| |
| list_for_each_entry(plane, &dev->mode_config.plane_list, base.head) { |
| if (plane->base.type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| if (plane->pipe != pipe) |
| continue; |
| |
| wm->sr.plane = vlv_compute_wm(to_intel_crtc(crtc), |
| plane, fifo_size); |
| if (wm->sr.plane != 0) |
| break; |
| } |
| |
| return true; |
| } |
| |
| static void valleyview_update_wm(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| enum pipe pipe = intel_crtc->pipe; |
| bool cxsr_enabled; |
| struct vlv_wm_values wm = dev_priv->wm.vlv; |
| |
| wm.ddl[pipe].primary = vlv_compute_drain_latency(crtc, crtc->primary); |
| wm.pipe[pipe].primary = vlv_compute_wm(intel_crtc, |
| to_intel_plane(crtc->primary), |
| vlv_get_fifo_size(dev, pipe, 0)); |
| |
| wm.ddl[pipe].cursor = vlv_compute_drain_latency(crtc, crtc->cursor); |
| wm.pipe[pipe].cursor = vlv_compute_wm(intel_crtc, |
| to_intel_plane(crtc->cursor), |
| 0x3f); |
| |
| cxsr_enabled = vlv_compute_sr_wm(dev, &wm); |
| |
| if (memcmp(&wm, &dev_priv->wm.vlv, sizeof(wm)) == 0) |
| return; |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - %c: plane=%d, cursor=%d, " |
| "SR: plane=%d, cursor=%d\n", pipe_name(pipe), |
| wm.pipe[pipe].primary, wm.pipe[pipe].cursor, |
| wm.sr.plane, wm.sr.cursor); |
| |
| if (!cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, false); |
| |
| vlv_write_wm_values(intel_crtc, &wm); |
| |
| if (cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, true); |
| } |
| |
| static void valleyview_update_sprite_wm(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| uint32_t sprite_width, |
| uint32_t sprite_height, |
| int pixel_size, |
| bool enabled, bool scaled) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| enum pipe pipe = intel_crtc->pipe; |
| int sprite = to_intel_plane(plane)->plane; |
| bool cxsr_enabled; |
| struct vlv_wm_values wm = dev_priv->wm.vlv; |
| |
| if (enabled) { |
| wm.ddl[pipe].sprite[sprite] = |
| vlv_compute_drain_latency(crtc, plane); |
| |
| wm.pipe[pipe].sprite[sprite] = |
| vlv_compute_wm(intel_crtc, |
| to_intel_plane(plane), |
| vlv_get_fifo_size(dev, pipe, sprite+1)); |
| } else { |
| wm.ddl[pipe].sprite[sprite] = 0; |
| wm.pipe[pipe].sprite[sprite] = 0; |
| } |
| |
| cxsr_enabled = vlv_compute_sr_wm(dev, &wm); |
| |
| if (memcmp(&wm, &dev_priv->wm.vlv, sizeof(wm)) == 0) |
| return; |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - %c: sprite %c=%d, " |
| "SR: plane=%d, cursor=%d\n", pipe_name(pipe), |
| sprite_name(pipe, sprite), |
| wm.pipe[pipe].sprite[sprite], |
| wm.sr.plane, wm.sr.cursor); |
| |
| if (!cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, false); |
| |
| vlv_write_wm_values(intel_crtc, &wm); |
| |
| if (cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, true); |
| } |
| |
| #define single_plane_enabled(mask) is_power_of_2(mask) |
| |
| static void g4x_update_wm(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| static const int sr_latency_ns = 12000; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int planea_wm, planeb_wm, cursora_wm, cursorb_wm; |
| int plane_sr, cursor_sr; |
| unsigned int enabled = 0; |
| bool cxsr_enabled; |
| |
| if (g4x_compute_wm0(dev, PIPE_A, |
| &g4x_wm_info, pessimal_latency_ns, |
| &g4x_cursor_wm_info, pessimal_latency_ns, |
| &planea_wm, &cursora_wm)) |
| enabled |= 1 << PIPE_A; |
| |
| if (g4x_compute_wm0(dev, PIPE_B, |
| &g4x_wm_info, pessimal_latency_ns, |
| &g4x_cursor_wm_info, pessimal_latency_ns, |
| &planeb_wm, &cursorb_wm)) |
| enabled |= 1 << PIPE_B; |
| |
| if (single_plane_enabled(enabled) && |
| g4x_compute_srwm(dev, ffs(enabled) - 1, |
| sr_latency_ns, |
| &g4x_wm_info, |
| &g4x_cursor_wm_info, |
| &plane_sr, &cursor_sr)) { |
| cxsr_enabled = true; |
| } else { |
| cxsr_enabled = false; |
| intel_set_memory_cxsr(dev_priv, false); |
| plane_sr = cursor_sr = 0; |
| } |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, " |
| "B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", |
| planea_wm, cursora_wm, |
| planeb_wm, cursorb_wm, |
| plane_sr, cursor_sr); |
| |
| I915_WRITE(DSPFW1, |
| (plane_sr << DSPFW_SR_SHIFT) | |
| (cursorb_wm << DSPFW_CURSORB_SHIFT) | |
| (planeb_wm << DSPFW_PLANEB_SHIFT) | |
| (planea_wm << DSPFW_PLANEA_SHIFT)); |
| I915_WRITE(DSPFW2, |
| (I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) | |
| (cursora_wm << DSPFW_CURSORA_SHIFT)); |
| /* HPLL off in SR has some issues on G4x... disable it */ |
| I915_WRITE(DSPFW3, |
| (I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) | |
| (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); |
| |
| if (cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, true); |
| } |
| |
| static void i965_update_wm(struct drm_crtc *unused_crtc) |
| { |
| struct drm_device *dev = unused_crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| int srwm = 1; |
| int cursor_sr = 16; |
| bool cxsr_enabled; |
| |
| /* Calc sr entries for one plane configs */ |
| crtc = single_enabled_crtc(dev); |
| if (crtc) { |
| /* self-refresh has much higher latency */ |
| static const int sr_latency_ns = 12000; |
| const struct drm_display_mode *adjusted_mode = |
| &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| int clock = adjusted_mode->crtc_clock; |
| int htotal = adjusted_mode->crtc_htotal; |
| int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w; |
| int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8; |
| unsigned long line_time_us; |
| int entries; |
| |
| line_time_us = max(htotal * 1000 / clock, 1); |
| |
| /* Use ns/us then divide to preserve precision */ |
| entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * |
| pixel_size * hdisplay; |
| entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE); |
| srwm = I965_FIFO_SIZE - entries; |
| if (srwm < 0) |
| srwm = 1; |
| srwm &= 0x1ff; |
| DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n", |
| entries, srwm); |
| |
| entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * |
| pixel_size * crtc->cursor->state->crtc_w; |
| entries = DIV_ROUND_UP(entries, |
| i965_cursor_wm_info.cacheline_size); |
| cursor_sr = i965_cursor_wm_info.fifo_size - |
| (entries + i965_cursor_wm_info.guard_size); |
| |
| if (cursor_sr > i965_cursor_wm_info.max_wm) |
| cursor_sr = i965_cursor_wm_info.max_wm; |
| |
| DRM_DEBUG_KMS("self-refresh watermark: display plane %d " |
| "cursor %d\n", srwm, cursor_sr); |
| |
| cxsr_enabled = true; |
| } else { |
| cxsr_enabled = false; |
| /* Turn off self refresh if both pipes are enabled */ |
| intel_set_memory_cxsr(dev_priv, false); |
| } |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", |
| srwm); |
| |
| /* 965 has limitations... */ |
| I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | |
| (8 << DSPFW_CURSORB_SHIFT) | |
| (8 << DSPFW_PLANEB_SHIFT) | |
| (8 << DSPFW_PLANEA_SHIFT)); |
| I915_WRITE(DSPFW2, (8 << DSPFW_CURSORA_SHIFT) | |
| (8 << DSPFW_PLANEC_SHIFT_OLD)); |
| /* update cursor SR watermark */ |
| I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); |
| |
| if (cxsr_enabled) |
| intel_set_memory_cxsr(dev_priv, true); |
| } |
| |
| static void i9xx_update_wm(struct drm_crtc *unused_crtc) |
| { |
| struct drm_device *dev = unused_crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| const struct intel_watermark_params *wm_info; |
| uint32_t fwater_lo; |
| uint32_t fwater_hi; |
| int cwm, srwm = 1; |
| int fifo_size; |
| int planea_wm, planeb_wm; |
| struct drm_crtc *crtc, *enabled = NULL; |
| |
| if (IS_I945GM(dev)) |
| wm_info = &i945_wm_info; |
| else if (!IS_GEN2(dev)) |
| wm_info = &i915_wm_info; |
| else |
| wm_info = &i830_a_wm_info; |
| |
| fifo_size = dev_priv->display.get_fifo_size(dev, 0); |
| crtc = intel_get_crtc_for_plane(dev, 0); |
| if (intel_crtc_active(crtc)) { |
| const struct drm_display_mode *adjusted_mode; |
| int cpp = crtc->primary->state->fb->bits_per_pixel / 8; |
| if (IS_GEN2(dev)) |
| cpp = 4; |
| |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock, |
| wm_info, fifo_size, cpp, |
| pessimal_latency_ns); |
| enabled = crtc; |
| } else { |
| planea_wm = fifo_size - wm_info->guard_size; |
| if (planea_wm > (long)wm_info->max_wm) |
| planea_wm = wm_info->max_wm; |
| } |
| |
| if (IS_GEN2(dev)) |
| wm_info = &i830_bc_wm_info; |
| |
| fifo_size = dev_priv->display.get_fifo_size(dev, 1); |
| crtc = intel_get_crtc_for_plane(dev, 1); |
| if (intel_crtc_active(crtc)) { |
| const struct drm_display_mode *adjusted_mode; |
| int cpp = crtc->primary->state->fb->bits_per_pixel / 8; |
| if (IS_GEN2(dev)) |
| cpp = 4; |
| |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock, |
| wm_info, fifo_size, cpp, |
| pessimal_latency_ns); |
| if (enabled == NULL) |
| enabled = crtc; |
| else |
| enabled = NULL; |
| } else { |
| planeb_wm = fifo_size - wm_info->guard_size; |
| if (planeb_wm > (long)wm_info->max_wm) |
| planeb_wm = wm_info->max_wm; |
| } |
| |
| DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); |
| |
| if (IS_I915GM(dev) && enabled) { |
| struct drm_i915_gem_object *obj; |
| |
| obj = intel_fb_obj(enabled->primary->state->fb); |
| |
| /* self-refresh seems busted with untiled */ |
| if (obj->tiling_mode == I915_TILING_NONE) |
| enabled = NULL; |
| } |
| |
| /* |
| * Overlay gets an aggressive default since video jitter is bad. |
| */ |
| cwm = 2; |
| |
| /* Play safe and disable self-refresh before adjusting watermarks. */ |
| intel_set_memory_cxsr(dev_priv, false); |
| |
| /* Calc sr entries for one plane configs */ |
| if (HAS_FW_BLC(dev) && enabled) { |
| /* self-refresh has much higher latency */ |
| static const int sr_latency_ns = 6000; |
| const struct drm_display_mode *adjusted_mode = |
| &to_intel_crtc(enabled)->config->base.adjusted_mode; |
| int clock = adjusted_mode->crtc_clock; |
| int htotal = adjusted_mode->crtc_htotal; |
| int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w; |
| int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8; |
| unsigned long line_time_us; |
| int entries; |
| |
| line_time_us = max(htotal * 1000 / clock, 1); |
| |
| /* Use ns/us then divide to preserve precision */ |
| entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * |
| pixel_size * hdisplay; |
| entries = DIV_ROUND_UP(entries, wm_info->cacheline_size); |
| DRM_DEBUG_KMS("self-refresh entries: %d\n", entries); |
| srwm = wm_info->fifo_size - entries; |
| if (srwm < 0) |
| srwm = 1; |
| |
| if (IS_I945G(dev) || IS_I945GM(dev)) |
| I915_WRITE(FW_BLC_SELF, |
| FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); |
| else if (IS_I915GM(dev)) |
| I915_WRITE(FW_BLC_SELF, srwm & 0x3f); |
| } |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", |
| planea_wm, planeb_wm, cwm, srwm); |
| |
| fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); |
| fwater_hi = (cwm & 0x1f); |
| |
| /* Set request length to 8 cachelines per fetch */ |
| fwater_lo = fwater_lo | (1 << 24) | (1 << 8); |
| fwater_hi = fwater_hi | (1 << 8); |
| |
| I915_WRITE(FW_BLC, fwater_lo); |
| I915_WRITE(FW_BLC2, fwater_hi); |
| |
| if (enabled) |
| intel_set_memory_cxsr(dev_priv, true); |
| } |
| |
| static void i845_update_wm(struct drm_crtc *unused_crtc) |
| { |
| struct drm_device *dev = unused_crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| const struct drm_display_mode *adjusted_mode; |
| uint32_t fwater_lo; |
| int planea_wm; |
| |
| crtc = single_enabled_crtc(dev); |
| if (crtc == NULL) |
| return; |
| |
| adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode; |
| planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock, |
| &i845_wm_info, |
| dev_priv->display.get_fifo_size(dev, 0), |
| 4, pessimal_latency_ns); |
| fwater_lo = I915_READ(FW_BLC) & ~0xfff; |
| fwater_lo |= (3<<8) | planea_wm; |
| |
| DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm); |
| |
| I915_WRITE(FW_BLC, fwater_lo); |
| } |
| |
| static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev, |
| struct drm_crtc *crtc) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| uint32_t pixel_rate; |
| |
| pixel_rate = intel_crtc->config->base.adjusted_mode.crtc_clock; |
| |
| /* We only use IF-ID interlacing. If we ever use PF-ID we'll need to |
| * adjust the pixel_rate here. */ |
| |
| if (intel_crtc->config->pch_pfit.enabled) { |
| uint64_t pipe_w, pipe_h, pfit_w, pfit_h; |
| uint32_t pfit_size = intel_crtc->config->pch_pfit.size; |
| |
| pipe_w = intel_crtc->config->pipe_src_w; |
| pipe_h = intel_crtc->config->pipe_src_h; |
| pfit_w = (pfit_size >> 16) & 0xFFFF; |
| pfit_h = pfit_size & 0xFFFF; |
| if (pipe_w < pfit_w) |
| pipe_w = pfit_w; |
| if (pipe_h < pfit_h) |
| pipe_h = pfit_h; |
| |
| pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h, |
| pfit_w * pfit_h); |
| } |
| |
| return pixel_rate; |
| } |
| |
| /* latency must be in 0.1us units. */ |
| static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel, |
| uint32_t latency) |
| { |
| uint64_t ret; |
| |
| if (WARN(latency == 0, "Latency value missing\n")) |
| return UINT_MAX; |
| |
| ret = (uint64_t) pixel_rate * bytes_per_pixel * latency; |
| ret = DIV_ROUND_UP_ULL(ret, 64 * 10000) + 2; |
| |
| return ret; |
| } |
| |
| /* latency must be in 0.1us units. */ |
| static uint32_t ilk_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal, |
| uint32_t horiz_pixels, uint8_t bytes_per_pixel, |
| uint32_t latency) |
| { |
| uint32_t ret; |
| |
| if (WARN(latency == 0, "Latency value missing\n")) |
| return UINT_MAX; |
| |
| ret = (latency * pixel_rate) / (pipe_htotal * 10000); |
| ret = (ret + 1) * horiz_pixels * bytes_per_pixel; |
| ret = DIV_ROUND_UP(ret, 64) + 2; |
| return ret; |
| } |
| |
| static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels, |
| uint8_t bytes_per_pixel) |
| { |
| return DIV_ROUND_UP(pri_val * 64, horiz_pixels * bytes_per_pixel) + 2; |
| } |
| |
| struct skl_pipe_wm_parameters { |
| bool active; |
| uint32_t pipe_htotal; |
| uint32_t pixel_rate; /* in KHz */ |
| struct intel_plane_wm_parameters plane[I915_MAX_PLANES]; |
| struct intel_plane_wm_parameters cursor; |
| }; |
| |
| struct ilk_pipe_wm_parameters { |
| bool active; |
| uint32_t pipe_htotal; |
| uint32_t pixel_rate; |
| struct intel_plane_wm_parameters pri; |
| struct intel_plane_wm_parameters spr; |
| struct intel_plane_wm_parameters cur; |
| }; |
| |
| struct ilk_wm_maximums { |
| uint16_t pri; |
| uint16_t spr; |
| uint16_t cur; |
| uint16_t fbc; |
| }; |
| |
| /* used in computing the new watermarks state */ |
| struct intel_wm_config { |
| unsigned int num_pipes_active; |
| bool sprites_enabled; |
| bool sprites_scaled; |
| }; |
| |
| /* |
| * For both WM_PIPE and WM_LP. |
| * mem_value must be in 0.1us units. |
| */ |
| static uint32_t ilk_compute_pri_wm(const struct ilk_pipe_wm_parameters *params, |
| uint32_t mem_value, |
| bool is_lp) |
| { |
| uint32_t method1, method2; |
| |
| if (!params->active || !params->pri.enabled) |
| return 0; |
| |
| method1 = ilk_wm_method1(params->pixel_rate, |
| params->pri.bytes_per_pixel, |
| mem_value); |
| |
| if (!is_lp) |
| return method1; |
| |
| method2 = ilk_wm_method2(params->pixel_rate, |
| params->pipe_htotal, |
| params->pri.horiz_pixels, |
| params->pri.bytes_per_pixel, |
| mem_value); |
| |
| return min(method1, method2); |
| } |
| |
| /* |
| * For both WM_PIPE and WM_LP. |
| * mem_value must be in 0.1us units. |
| */ |
| static uint32_t ilk_compute_spr_wm(const struct ilk_pipe_wm_parameters *params, |
| uint32_t mem_value) |
| { |
| uint32_t method1, method2; |
| |
| if (!params->active || !params->spr.enabled) |
| return 0; |
| |
| method1 = ilk_wm_method1(params->pixel_rate, |
| params->spr.bytes_per_pixel, |
| mem_value); |
| method2 = ilk_wm_method2(params->pixel_rate, |
| params->pipe_htotal, |
| params->spr.horiz_pixels, |
| params->spr.bytes_per_pixel, |
| mem_value); |
| return min(method1, method2); |
| } |
| |
| /* |
| * For both WM_PIPE and WM_LP. |
| * mem_value must be in 0.1us units. |
| */ |
| static uint32_t ilk_compute_cur_wm(const struct ilk_pipe_wm_parameters *params, |
| uint32_t mem_value) |
| { |
| if (!params->active || !params->cur.enabled) |
| return 0; |
| |
| return ilk_wm_method2(params->pixel_rate, |
| params->pipe_htotal, |
| params->cur.horiz_pixels, |
| params->cur.bytes_per_pixel, |
| mem_value); |
| } |
| |
| /* Only for WM_LP. */ |
| static uint32_t ilk_compute_fbc_wm(const struct ilk_pipe_wm_parameters *params, |
| uint32_t pri_val) |
| { |
| if (!params->active || !params->pri.enabled) |
| return 0; |
| |
| return ilk_wm_fbc(pri_val, |
| params->pri.horiz_pixels, |
| params->pri.bytes_per_pixel); |
| } |
| |
| static unsigned int ilk_display_fifo_size(const struct drm_device *dev) |
| { |
| if (INTEL_INFO(dev)->gen >= 8) |
| return 3072; |
| else if (INTEL_INFO(dev)->gen >= 7) |
| return 768; |
| else |
| return 512; |
| } |
| |
| static unsigned int ilk_plane_wm_reg_max(const struct drm_device *dev, |
| int level, bool is_sprite) |
| { |
| if (INTEL_INFO(dev)->gen >= 8) |
| /* BDW primary/sprite plane watermarks */ |
| return level == 0 ? 255 : 2047; |
| else if (INTEL_INFO(dev)->gen >= 7) |
| /* IVB/HSW primary/sprite plane watermarks */ |
| return level == 0 ? 127 : 1023; |
| else if (!is_sprite) |
| /* ILK/SNB primary plane watermarks */ |
| return level == 0 ? 127 : 511; |
| else |
| /* ILK/SNB sprite plane watermarks */ |
| return level == 0 ? 63 : 255; |
| } |
| |
| static unsigned int ilk_cursor_wm_reg_max(const struct drm_device *dev, |
| int level) |
| { |
| if (INTEL_INFO(dev)->gen >= 7) |
| return level == 0 ? 63 : 255; |
| else |
| return level == 0 ? 31 : 63; |
| } |
| |
| static unsigned int ilk_fbc_wm_reg_max(const struct drm_device *dev) |
| { |
| if (INTEL_INFO(dev)->gen >= 8) |
| return 31; |
| else |
| return 15; |
| } |
| |
| /* Calculate the maximum primary/sprite plane watermark */ |
| static unsigned int ilk_plane_wm_max(const struct drm_device *dev, |
| int level, |
| const struct intel_wm_config *config, |
| enum intel_ddb_partitioning ddb_partitioning, |
| bool is_sprite) |
| { |
| unsigned int fifo_size = ilk_display_fifo_size(dev); |
| |
| /* if sprites aren't enabled, sprites get nothing */ |
| if (is_sprite && !config->sprites_enabled) |
| return 0; |
| |
| /* HSW allows LP1+ watermarks even with multiple pipes */ |
| if (level == 0 || config->num_pipes_active > 1) { |
| fifo_size /= INTEL_INFO(dev)->num_pipes; |
| |
| /* |
| * For some reason the non self refresh |
| * FIFO size is only half of the self |
| * refresh FIFO size on ILK/SNB. |
| */ |
| if (INTEL_INFO(dev)->gen <= 6) |
| fifo_size /= 2; |
| } |
| |
| if (config->sprites_enabled) { |
| /* level 0 is always calculated with 1:1 split */ |
| if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) { |
| if (is_sprite) |
| fifo_size *= 5; |
| fifo_size /= 6; |
| } else { |
| fifo_size /= 2; |
| } |
| } |
| |
| /* clamp to max that the registers can hold */ |
| return min(fifo_size, ilk_plane_wm_reg_max(dev, level, is_sprite)); |
| } |
| |
| /* Calculate the maximum cursor plane watermark */ |
| static unsigned int ilk_cursor_wm_max(const struct drm_device *dev, |
| int level, |
| const struct intel_wm_config *config) |
| { |
| /* HSW LP1+ watermarks w/ multiple pipes */ |
| if (level > 0 && config->num_pipes_active > 1) |
| return 64; |
| |
| /* otherwise just report max that registers can hold */ |
| return ilk_cursor_wm_reg_max(dev, level); |
| } |
| |
| static void ilk_compute_wm_maximums(const struct drm_device *dev, |
| int level, |
| const struct intel_wm_config *config, |
| enum intel_ddb_partitioning ddb_partitioning, |
| struct ilk_wm_maximums *max) |
| { |
| max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false); |
| max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true); |
| max->cur = ilk_cursor_wm_max(dev, level, config); |
| max->fbc = ilk_fbc_wm_reg_max(dev); |
| } |
| |
| static void ilk_compute_wm_reg_maximums(struct drm_device *dev, |
| int level, |
| struct ilk_wm_maximums *max) |
| { |
| max->pri = ilk_plane_wm_reg_max(dev, level, false); |
| max->spr = ilk_plane_wm_reg_max(dev, level, true); |
| max->cur = ilk_cursor_wm_reg_max(dev, level); |
| max->fbc = ilk_fbc_wm_reg_max(dev); |
| } |
| |
| static bool ilk_validate_wm_level(int level, |
| const struct ilk_wm_maximums *max, |
| struct intel_wm_level *result) |
| { |
| bool ret; |
| |
| /* already determined to be invalid? */ |
| if (!result->enable) |
| return false; |
| |
| result->enable = result->pri_val <= max->pri && |
| result->spr_val <= max->spr && |
| result->cur_val <= max->cur; |
| |
| ret = result->enable; |
| |
| /* |
| * HACK until we can pre-compute everything, |
| * and thus fail gracefully if LP0 watermarks |
| * are exceeded... |
| */ |
| if (level == 0 && !result->enable) { |
| if (result->pri_val > max->pri) |
| DRM_DEBUG_KMS("Primary WM%d too large %u (max %u)\n", |
| level, result->pri_val, max->pri); |
| if (result->spr_val > max->spr) |
| DRM_DEBUG_KMS("Sprite WM%d too large %u (max %u)\n", |
| level, result->spr_val, max->spr); |
| if (result->cur_val > max->cur) |
| DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n", |
| level, result->cur_val, max->cur); |
| |
| result->pri_val = min_t(uint32_t, result->pri_val, max->pri); |
| result->spr_val = min_t(uint32_t, result->spr_val, max->spr); |
| result->cur_val = min_t(uint32_t, result->cur_val, max->cur); |
| result->enable = true; |
| } |
| |
| return ret; |
| } |
| |
| static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv, |
| int level, |
| const struct ilk_pipe_wm_parameters *p, |
| struct intel_wm_level *result) |
| { |
| uint16_t pri_latency = dev_priv->wm.pri_latency[level]; |
| uint16_t spr_latency = dev_priv->wm.spr_latency[level]; |
| uint16_t cur_latency = dev_priv->wm.cur_latency[level]; |
| |
| /* WM1+ latency values stored in 0.5us units */ |
| if (level > 0) { |
| pri_latency *= 5; |
| spr_latency *= 5; |
| cur_latency *= 5; |
| } |
| |
| result->pri_val = ilk_compute_pri_wm(p, pri_latency, level); |
| result->spr_val = ilk_compute_spr_wm(p, spr_latency); |
| result->cur_val = ilk_compute_cur_wm(p, cur_latency); |
| result->fbc_val = ilk_compute_fbc_wm(p, result->pri_val); |
| result->enable = true; |
| } |
| |
| static uint32_t |
| hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode; |
| u32 linetime, ips_linetime; |
| |
| if (!intel_crtc->active) |
| return 0; |
| |
| /* The WM are computed with base on how long it takes to fill a single |
| * row at the given clock rate, multiplied by 8. |
| * */ |
| linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, |
| mode->crtc_clock); |
| ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, |
| intel_ddi_get_cdclk_freq(dev_priv)); |
| |
| return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) | |
| PIPE_WM_LINETIME_TIME(linetime); |
| } |
| |
| static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[8]) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (IS_GEN9(dev)) { |
| uint32_t val; |
| int ret, i; |
| int level, max_level = ilk_wm_max_level(dev); |
| |
| /* read the first set of memory latencies[0:3] */ |
| val = 0; /* data0 to be programmed to 0 for first set */ |
| mutex_lock(&dev_priv->rps.hw_lock); |
| ret = sandybridge_pcode_read(dev_priv, |
| GEN9_PCODE_READ_MEM_LATENCY, |
| &val); |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| |
| if (ret) { |
| DRM_ERROR("SKL Mailbox read error = %d\n", ret); |
| return; |
| } |
| |
| wm[0] = val & GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[1] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[2] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[3] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| |
| /* read the second set of memory latencies[4:7] */ |
| val = 1; /* data0 to be programmed to 1 for second set */ |
| mutex_lock(&dev_priv->rps.hw_lock); |
| ret = sandybridge_pcode_read(dev_priv, |
| GEN9_PCODE_READ_MEM_LATENCY, |
| &val); |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| if (ret) { |
| DRM_ERROR("SKL Mailbox read error = %d\n", ret); |
| return; |
| } |
| |
| wm[4] = val & GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[5] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[6] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| wm[7] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) & |
| GEN9_MEM_LATENCY_LEVEL_MASK; |
| |
| /* |
| * WaWmMemoryReadLatency:skl |
| * |
| * punit doesn't take into account the read latency so we need |
| * to add 2us to the various latency levels we retrieve from |
| * the punit. |
| * - W0 is a bit special in that it's the only level that |
| * can't be disabled if we want to have display working, so |
| * we always add 2us there. |
| * - For levels >=1, punit returns 0us latency when they are |
| * disabled, so we respect that and don't add 2us then |
| * |
| * Additionally, if a level n (n > 1) has a 0us latency, all |
| * levels m (m >= n) need to be disabled. We make sure to |
| * sanitize the values out of the punit to satisfy this |
| * requirement. |
| */ |
| wm[0] += 2; |
| for (level = 1; level <= max_level; level++) |
| if (wm[level] != 0) |
| wm[level] += 2; |
| else { |
| for (i = level + 1; i <= max_level; i++) |
| wm[i] = 0; |
| |
| break; |
| } |
| } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| uint64_t sskpd = I915_READ64(MCH_SSKPD); |
| |
| wm[0] = (sskpd >> 56) & 0xFF; |
| if (wm[0] == 0) |
| wm[0] = sskpd & 0xF; |
| wm[1] = (sskpd >> 4) & 0xFF; |
| wm[2] = (sskpd >> 12) & 0xFF; |
| wm[3] = (sskpd >> 20) & 0x1FF; |
| wm[4] = (sskpd >> 32) & 0x1FF; |
| } else if (INTEL_INFO(dev)->gen >= 6) { |
| uint32_t sskpd = I915_READ(MCH_SSKPD); |
| |
| wm[0] = (sskpd >> SSKPD_WM0_SHIFT) & SSKPD_WM_MASK; |
| wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK; |
| wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK; |
| wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK; |
| } else if (INTEL_INFO(dev)->gen >= 5) { |
| uint32_t mltr = I915_READ(MLTR_ILK); |
| |
| /* ILK primary LP0 latency is 700 ns */ |
| wm[0] = 7; |
| wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK; |
| wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK; |
| } |
| } |
| |
| static void intel_fixup_spr_wm_latency(struct drm_device *dev, uint16_t wm[5]) |
| { |
| /* ILK sprite LP0 latency is 1300 ns */ |
| if (INTEL_INFO(dev)->gen == 5) |
| wm[0] = 13; |
| } |
| |
| static void intel_fixup_cur_wm_latency(struct drm_device *dev, uint16_t wm[5]) |
| { |
| /* ILK cursor LP0 latency is 1300 ns */ |
| if (INTEL_INFO(dev)->gen == 5) |
| wm[0] = 13; |
| |
| /* WaDoubleCursorLP3Latency:ivb */ |
| if (IS_IVYBRIDGE(dev)) |
| wm[3] *= 2; |
| } |
| |
| int ilk_wm_max_level(const struct drm_device *dev) |
| { |
| /* how many WM levels are we expecting */ |
| if (IS_GEN9(dev)) |
| return 7; |
| else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| return 4; |
| else if (INTEL_INFO(dev)->gen >= 6) |
| return 3; |
| else |
| return 2; |
| } |
| |
| static void intel_print_wm_latency(struct drm_device *dev, |
| const char *name, |
| const uint16_t wm[8]) |
| { |
| int level, max_level = ilk_wm_max_level(dev); |
| |
| for (level = 0; level <= max_level; level++) { |
| unsigned int latency = wm[level]; |
| |
| if (latency == 0) { |
| DRM_ERROR("%s WM%d latency not provided\n", |
| name, level); |
| continue; |
| } |
| |
| /* |
| * - latencies are in us on gen9. |
| * - before then, WM1+ latency values are in 0.5us units |
| */ |
| if (IS_GEN9(dev)) |
| latency *= 10; |
| else if (level > 0) |
| latency *= 5; |
| |
| DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n", |
| name, level, wm[level], |
| latency / 10, latency % 10); |
| } |
| } |
| |
| static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv, |
| uint16_t wm[5], uint16_t min) |
| { |
| int level, max_level = ilk_wm_max_level(dev_priv->dev); |
| |
| if (wm[0] >= min) |
| return false; |
| |
| wm[0] = max(wm[0], min); |
| for (level = 1; level <= max_level; level++) |
| wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5)); |
| |
| return true; |
| } |
| |
| static void snb_wm_latency_quirk(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| bool changed; |
| |
| /* |
| * The BIOS provided WM memory latency values are often |
| * inadequate for high resolution displays. Adjust them. |
| */ |
| changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | |
| ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) | |
| ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12); |
| |
| if (!changed) |
| return; |
| |
| DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n"); |
| intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); |
| intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); |
| intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); |
| } |
| |
| static void ilk_setup_wm_latency(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| intel_read_wm_latency(dev, dev_priv->wm.pri_latency); |
| |
| memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency, |
| sizeof(dev_priv->wm.pri_latency)); |
| memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency, |
| sizeof(dev_priv->wm.pri_latency)); |
| |
| intel_fixup_spr_wm_latency(dev, dev_priv->wm.spr_latency); |
| intel_fixup_cur_wm_latency(dev, dev_priv->wm.cur_latency); |
| |
| intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); |
| intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); |
| intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); |
| |
| if (IS_GEN6(dev)) |
| snb_wm_latency_quirk(dev); |
| } |
| |
| static void skl_setup_wm_latency(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| intel_read_wm_latency(dev, dev_priv->wm.skl_latency); |
| intel_print_wm_latency(dev, "Gen9 Plane", dev_priv->wm.skl_latency); |
| } |
| |
| static void ilk_compute_wm_parameters(struct drm_crtc *crtc, |
| struct ilk_pipe_wm_parameters *p) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| enum pipe pipe = intel_crtc->pipe; |
| struct drm_plane *plane; |
| |
| if (!intel_crtc->active) |
| return; |
| |
| p->active = true; |
| p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal; |
| p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); |
| p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8; |
| p->cur.bytes_per_pixel = 4; |
| p->pri.horiz_pixels = intel_crtc->config->pipe_src_w; |
| p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w; |
| /* TODO: for now, assume primary and cursor planes are always enabled. */ |
| p->pri.enabled = true; |
| p->cur.enabled = true; |
| |
| drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| |
| if (intel_plane->pipe == pipe) { |
| p->spr = intel_plane->wm; |
| break; |
| } |
| } |
| } |
| |
| static void ilk_compute_wm_config(struct drm_device *dev, |
| struct intel_wm_config *config) |
| { |
| struct intel_crtc *intel_crtc; |
| |
| /* Compute the currently _active_ config */ |
| for_each_intel_crtc(dev, intel_crtc) { |
| const struct intel_pipe_wm *wm = &intel_crtc->wm.active; |
| |
| if (!wm->pipe_enabled) |
| continue; |
| |
| config->sprites_enabled |= wm->sprites_enabled; |
| config->sprites_scaled |= wm->sprites_scaled; |
| config->num_pipes_active++; |
| } |
| } |
| |
| /* Compute new watermarks for the pipe */ |
| static bool intel_compute_pipe_wm(struct drm_crtc *crtc, |
| const struct ilk_pipe_wm_parameters *params, |
| struct intel_pipe_wm *pipe_wm) |
| { |
| struct drm_device *dev = crtc->dev; |
| const struct drm_i915_private *dev_priv = dev->dev_private; |
| int level, max_level = ilk_wm_max_level(dev); |
| /* LP0 watermark maximums depend on this pipe alone */ |
| struct intel_wm_config config = { |
| .num_pipes_active = 1, |
| .sprites_enabled = params->spr.enabled, |
| .sprites_scaled = params->spr.scaled, |
| }; |
| struct ilk_wm_maximums max; |
| |
| pipe_wm->pipe_enabled = params->active; |
| pipe_wm->sprites_enabled = params->spr.enabled; |
| pipe_wm->sprites_scaled = params->spr.scaled; |
| |
| /* ILK/SNB: LP2+ watermarks only w/o sprites */ |
| if (INTEL_INFO(dev)->gen <= 6 && params->spr.enabled) |
| max_level = 1; |
| |
| /* ILK/SNB/IVB: LP1+ watermarks only w/o scaling */ |
| if (params->spr.scaled) |
| max_level = 0; |
| |
| ilk_compute_wm_level(dev_priv, 0, params, &pipe_wm->wm[0]); |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| pipe_wm->linetime = hsw_compute_linetime_wm(dev, crtc); |
| |
| /* LP0 watermarks always use 1/2 DDB partitioning */ |
| ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max); |
| |
| /* At least LP0 must be valid */ |
| if (!ilk_validate_wm_level(0, &max, &pipe_wm->wm[0])) |
| return false; |
| |
| ilk_compute_wm_reg_maximums(dev, 1, &max); |
| |
| for (level = 1; level <= max_level; level++) { |
| struct intel_wm_level wm = {}; |
| |
| ilk_compute_wm_level(dev_priv, level, params, &wm); |
| |
| /* |
| * Disable any watermark level that exceeds the |
| * register maximums since such watermarks are |
| * always invalid. |
| */ |
| if (!ilk_validate_wm_level(level, &max, &wm)) |
| break; |
| |
| pipe_wm->wm[level] = wm; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Merge the watermarks from all active pipes for a specific level. |
| */ |
| static void ilk_merge_wm_level(struct drm_device *dev, |
| int level, |
| struct intel_wm_level *ret_wm) |
| { |
| const struct intel_crtc *intel_crtc; |
| |
| ret_wm->enable = true; |
| |
| for_each_intel_crtc(dev, intel_crtc) { |
| const struct intel_pipe_wm *active = &intel_crtc->wm.active; |
| const struct intel_wm_level *wm = &active->wm[level]; |
| |
| if (!active->pipe_enabled) |
| continue; |
| |
| /* |
| * The watermark values may have been used in the past, |
| * so we must maintain them in the registers for some |
| * time even if the level is now disabled. |
| */ |
| if (!wm->enable) |
| ret_wm->enable = false; |
| |
| ret_wm->pri_val = max(ret_wm->pri_val, wm->pri_val); |
| ret_wm->spr_val = max(ret_wm->spr_val, wm->spr_val); |
| ret_wm->cur_val = max(ret_wm->cur_val, wm->cur_val); |
| ret_wm->fbc_val = max(ret_wm->fbc_val, wm->fbc_val); |
| } |
| } |
| |
| /* |
| * Merge all low power watermarks for all active pipes. |
| */ |
| static void ilk_wm_merge(struct drm_device *dev, |
| const struct intel_wm_config *config, |
| const struct ilk_wm_maximums *max, |
| struct intel_pipe_wm *merged) |
| { |
| int level, max_level = ilk_wm_max_level(dev); |
| int last_enabled_level = max_level; |
| |
| /* ILK/SNB/IVB: LP1+ watermarks only w/ single pipe */ |
| if ((INTEL_INFO(dev)->gen <= 6 || IS_IVYBRIDGE(dev)) && |
| config->num_pipes_active > 1) |
| return; |
| |
| /* ILK: FBC WM must be disabled always */ |
| merged->fbc_wm_enabled = INTEL_INFO(dev)->gen >= 6; |
| |
| /* merge each WM1+ level */ |
| for (level = 1; level <= max_level; level++) { |
| struct intel_wm_level *wm = &merged->wm[level]; |
| |
| ilk_merge_wm_level(dev, level, wm); |
| |
| if (level > last_enabled_level) |
| wm->enable = false; |
| else if (!ilk_validate_wm_level(level, max, wm)) |
| /* make sure all following levels get disabled */ |
| last_enabled_level = level - 1; |
| |
| /* |
| * The spec says it is preferred to disable |
| * FBC WMs instead of disabling a WM level. |
| */ |
| if (wm->fbc_val > max->fbc) { |
| if (wm->enable) |
| merged->fbc_wm_enabled = false; |
| wm->fbc_val = 0; |
| } |
| } |
| |
| /* ILK: LP2+ must be disabled when FBC WM is disabled but FBC enabled */ |
| /* |
| * FIXME this is racy. FBC might get enabled later. |
| * What we should check here is whether FBC can be |
| * enabled sometime later. |
| */ |
| if (IS_GEN5(dev) && !merged->fbc_wm_enabled && intel_fbc_enabled(dev)) { |
| for (level = 2; level <= max_level; level++) { |
| struct intel_wm_level *wm = &merged->wm[level]; |
| |
| wm->enable = false; |
| } |
| } |
| } |
| |
| static int ilk_wm_lp_to_level(int wm_lp, const struct intel_pipe_wm *pipe_wm) |
| { |
| /* LP1,LP2,LP3 levels are either 1,2,3 or 1,3,4 */ |
| return wm_lp + (wm_lp >= 2 && pipe_wm->wm[4].enable); |
| } |
| |
| /* The value we need to program into the WM_LPx latency field */ |
| static unsigned int ilk_wm_lp_latency(struct drm_device *dev, int level) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| return 2 * level; |
| else |
| return dev_priv->wm.pri_latency[level]; |
| } |
| |
| static void ilk_compute_wm_results(struct drm_device *dev, |
| const struct intel_pipe_wm *merged, |
| enum intel_ddb_partitioning partitioning, |
| struct ilk_wm_values *results) |
| { |
| struct intel_crtc *intel_crtc; |
| int level, wm_lp; |
| |
| results->enable_fbc_wm = merged->fbc_wm_enabled; |
| results->partitioning = partitioning; |
| |
| /* LP1+ register values */ |
| for (wm_lp = 1; wm_lp <= 3; wm_lp++) { |
| const struct intel_wm_level *r; |
| |
| level = ilk_wm_lp_to_level(wm_lp, merged); |
| |
| r = &merged->wm[level]; |
| |
| /* |
| * Maintain the watermark values even if the level is |
| * disabled. Doing otherwise could cause underruns. |
| */ |
| results->wm_lp[wm_lp - 1] = |
| (ilk_wm_lp_latency(dev, level) << WM1_LP_LATENCY_SHIFT) | |
| (r->pri_val << WM1_LP_SR_SHIFT) | |
| r->cur_val; |
| |
| if (r->enable) |
| results->wm_lp[wm_lp - 1] |= WM1_LP_SR_EN; |
| |
| if (INTEL_INFO(dev)->gen >= 8) |
| results->wm_lp[wm_lp - 1] |= |
| r->fbc_val << WM1_LP_FBC_SHIFT_BDW; |
| else |
| results->wm_lp[wm_lp - 1] |= |
| r->fbc_val << WM1_LP_FBC_SHIFT; |
| |
| /* |
| * Always set WM1S_LP_EN when spr_val != 0, even if the |
| * level is disabled. Doing otherwise could cause underruns. |
| */ |
| if (INTEL_INFO(dev)->gen <= 6 && r->spr_val) { |
| WARN_ON(wm_lp != 1); |
| results->wm_lp_spr[wm_lp - 1] = WM1S_LP_EN | r->spr_val; |
| } else |
| results->wm_lp_spr[wm_lp - 1] = r->spr_val; |
| } |
| |
| /* LP0 register values */ |
| for_each_intel_crtc(dev, intel_crtc) { |
| enum pipe pipe = intel_crtc->pipe; |
| const struct intel_wm_level *r = |
| &intel_crtc->wm.active.wm[0]; |
| |
| if (WARN_ON(!r->enable)) |
| continue; |
| |
| results->wm_linetime[pipe] = intel_crtc->wm.active.linetime; |
| |
| results->wm_pipe[pipe] = |
| (r->pri_val << WM0_PIPE_PLANE_SHIFT) | |
| (r->spr_val << WM0_PIPE_SPRITE_SHIFT) | |
| r->cur_val; |
| } |
| } |
| |
| /* Find the result with the highest level enabled. Check for enable_fbc_wm in |
| * case both are at the same level. Prefer r1 in case they're the same. */ |
| static struct intel_pipe_wm *ilk_find_best_result(struct drm_device *dev, |
| struct intel_pipe_wm *r1, |
| struct intel_pipe_wm *r2) |
| { |
| int level, max_level = ilk_wm_max_level(dev); |
| int level1 = 0, level2 = 0; |
| |
| for (level = 1; level <= max_level; level++) { |
| if (r1->wm[level].enable) |
| level1 = level; |
| if (r2->wm[level].enable) |
| level2 = level; |
| } |
| |
| if (level1 == level2) { |
| if (r2->fbc_wm_enabled && !r1->fbc_wm_enabled) |
| return r2; |
| else |
| return r1; |
| } else if (level1 > level2) { |
| return r1; |
| } else { |
| return r2; |
| } |
| } |
| |
| /* dirty bits used to track which watermarks need changes */ |
| #define WM_DIRTY_PIPE(pipe) (1 << (pipe)) |
| #define WM_DIRTY_LINETIME(pipe) (1 << (8 + (pipe))) |
| #define WM_DIRTY_LP(wm_lp) (1 << (15 + (wm_lp))) |
| #define WM_DIRTY_LP_ALL (WM_DIRTY_LP(1) | WM_DIRTY_LP(2) | WM_DIRTY_LP(3)) |
| #define WM_DIRTY_FBC (1 << 24) |
| #define WM_DIRTY_DDB (1 << 25) |
| |
| static unsigned int ilk_compute_wm_dirty(struct drm_i915_private *dev_priv, |
| const struct ilk_wm_values *old, |
| const struct ilk_wm_values *new) |
| { |
| unsigned int dirty = 0; |
| enum pipe pipe; |
| int wm_lp; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (old->wm_linetime[pipe] != new->wm_linetime[pipe]) { |
| dirty |= WM_DIRTY_LINETIME(pipe); |
| /* Must disable LP1+ watermarks too */ |
| dirty |= WM_DIRTY_LP_ALL; |
| } |
| |
| if (old->wm_pipe[pipe] != new->wm_pipe[pipe]) { |
| dirty |= WM_DIRTY_PIPE(pipe); |
| /* Must disable LP1+ watermarks too */ |
| dirty |= WM_DIRTY_LP_ALL; |
| } |
| } |
| |
| if (old->enable_fbc_wm != new->enable_fbc_wm) { |
| dirty |= WM_DIRTY_FBC; |
| /* Must disable LP1+ watermarks too */ |
| dirty |= WM_DIRTY_LP_ALL; |
| } |
| |
| if (old->partitioning != new->partitioning) { |
| dirty |= WM_DIRTY_DDB; |
| /* Must disable LP1+ watermarks too */ |
| dirty |= WM_DIRTY_LP_ALL; |
| } |
| |
| /* LP1+ watermarks already deemed dirty, no need to continue */ |
| if (dirty & WM_DIRTY_LP_ALL) |
| return dirty; |
| |
| /* Find the lowest numbered LP1+ watermark in need of an update... */ |
| for (wm_lp = 1; wm_lp <= 3; wm_lp++) { |
| if (old->wm_lp[wm_lp - 1] != new->wm_lp[wm_lp - 1] || |
| old->wm_lp_spr[wm_lp - 1] != new->wm_lp_spr[wm_lp - 1]) |
| break; |
| } |
| |
| /* ...and mark it and all higher numbered LP1+ watermarks as dirty */ |
| for (; wm_lp <= 3; wm_lp++) |
| dirty |= WM_DIRTY_LP(wm_lp); |
| |
| return dirty; |
| } |
| |
| static bool _ilk_disable_lp_wm(struct drm_i915_private *dev_priv, |
| unsigned int dirty) |
| { |
| struct ilk_wm_values *previous = &dev_priv->wm.hw; |
| bool changed = false; |
| |
| if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] & WM1_LP_SR_EN) { |
| previous->wm_lp[2] &= ~WM1_LP_SR_EN; |
| I915_WRITE(WM3_LP_ILK, previous->wm_lp[2]); |
| changed = true; |
| } |
| if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] & WM1_LP_SR_EN) { |
| previous->wm_lp[1] &= ~WM1_LP_SR_EN; |
| I915_WRITE(WM2_LP_ILK, previous->wm_lp[1]); |
| changed = true; |
| } |
| if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] & WM1_LP_SR_EN) { |
| previous->wm_lp[0] &= ~WM1_LP_SR_EN; |
| I915_WRITE(WM1_LP_ILK, previous->wm_lp[0]); |
| changed = true; |
| } |
| |
| /* |
| * Don't touch WM1S_LP_EN here. |
| * Doing so could cause underruns. |
| */ |
| |
| return changed; |
| } |
| |
| /* |
| * The spec says we shouldn't write when we don't need, because every write |
| * causes WMs to be re-evaluated, expending some power. |
| */ |
| static void ilk_write_wm_values(struct drm_i915_private *dev_priv, |
| struct ilk_wm_values *results) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct ilk_wm_values *previous = &dev_priv->wm.hw; |
| unsigned int dirty; |
| uint32_t val; |
| |
| dirty = ilk_compute_wm_dirty(dev_priv, previous, results); |
| if (!dirty) |
| return; |
| |
| _ilk_disable_lp_wm(dev_priv, dirty); |
| |
| if (dirty & WM_DIRTY_PIPE(PIPE_A)) |
| I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]); |
| if (dirty & WM_DIRTY_PIPE(PIPE_B)) |
| I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]); |
| if (dirty & WM_DIRTY_PIPE(PIPE_C)) |
| I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]); |
| |
| if (dirty & WM_DIRTY_LINETIME(PIPE_A)) |
| I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]); |
| if (dirty & WM_DIRTY_LINETIME(PIPE_B)) |
| I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]); |
| if (dirty & WM_DIRTY_LINETIME(PIPE_C)) |
| I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]); |
| |
| if (dirty & WM_DIRTY_DDB) { |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| val = I915_READ(WM_MISC); |
| if (results->partitioning == INTEL_DDB_PART_1_2) |
| val &= ~WM_MISC_DATA_PARTITION_5_6; |
| else |
| val |= WM_MISC_DATA_PARTITION_5_6; |
| I915_WRITE(WM_MISC, val); |
| } else { |
| val = I915_READ(DISP_ARB_CTL2); |
| if (results->partitioning == INTEL_DDB_PART_1_2) |
| val &= ~DISP_DATA_PARTITION_5_6; |
| else |
| val |= DISP_DATA_PARTITION_5_6; |
| I915_WRITE(DISP_ARB_CTL2, val); |
| } |
| } |
| |
| if (dirty & WM_DIRTY_FBC) { |
| val = I915_READ(DISP_ARB_CTL); |
| if (results->enable_fbc_wm) |
| val &= ~DISP_FBC_WM_DIS; |
| else |
| val |= DISP_FBC_WM_DIS; |
| I915_WRITE(DISP_ARB_CTL, val); |
| } |
| |
| if (dirty & WM_DIRTY_LP(1) && |
| previous->wm_lp_spr[0] != results->wm_lp_spr[0]) |
| I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]); |
| |
| if (INTEL_INFO(dev)->gen >= 7) { |
| if (dirty & WM_DIRTY_LP(2) && previous->wm_lp_spr[1] != results->wm_lp_spr[1]) |
| I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]); |
| if (dirty & WM_DIRTY_LP(3) && previous->wm_lp_spr[2] != results->wm_lp_spr[2]) |
| I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]); |
| } |
| |
| if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] != results->wm_lp[0]) |
| I915_WRITE(WM1_LP_ILK, results->wm_lp[0]); |
| if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] != results->wm_lp[1]) |
| I915_WRITE(WM2_LP_ILK, results->wm_lp[1]); |
| if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2]) |
| I915_WRITE(WM3_LP_ILK, results->wm_lp[2]); |
| |
| dev_priv->wm.hw = *results; |
| } |
| |
| static bool ilk_disable_lp_wm(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL); |
| } |
| |
| /* |
| * On gen9, we need to allocate Display Data Buffer (DDB) portions to the |
| * different active planes. |
| */ |
| |
| #define SKL_DDB_SIZE 896 /* in blocks */ |
| |
| static void |
| skl_ddb_get_pipe_allocation_limits(struct drm_device *dev, |
| struct drm_crtc *for_crtc, |
| const struct intel_wm_config *config, |
| const struct skl_pipe_wm_parameters *params, |
| struct skl_ddb_entry *alloc /* out */) |
| { |
| struct drm_crtc *crtc; |
| unsigned int pipe_size, ddb_size; |
| int nth_active_pipe; |
| |
| if (!params->active) { |
| alloc->start = 0; |
| alloc->end = 0; |
| return; |
| } |
| |
| ddb_size = SKL_DDB_SIZE; |
| |
| ddb_size -= 4; /* 4 blocks for bypass path allocation */ |
| |
| nth_active_pipe = 0; |
| for_each_crtc(dev, crtc) { |
| if (!to_intel_crtc(crtc)->active) |
| continue; |
| |
| if (crtc == for_crtc) |
| break; |
| |
| nth_active_pipe++; |
| } |
| |
| pipe_size = ddb_size / config->num_pipes_active; |
| alloc->start = nth_active_pipe * ddb_size / config->num_pipes_active; |
| alloc->end = alloc->start + pipe_size; |
| } |
| |
| static unsigned int skl_cursor_allocation(const struct intel_wm_config *config) |
| { |
| if (config->num_pipes_active == 1) |
| return 32; |
| |
| return 8; |
| } |
| |
| static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg) |
| { |
| entry->start = reg & 0x3ff; |
| entry->end = (reg >> 16) & 0x3ff; |
| if (entry->end) |
| entry->end += 1; |
| } |
| |
| void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv, |
| struct skl_ddb_allocation *ddb /* out */) |
| { |
| enum pipe pipe; |
| int plane; |
| u32 val; |
| |
| for_each_pipe(dev_priv, pipe) { |
| for_each_plane(dev_priv, pipe, plane) { |
| val = I915_READ(PLANE_BUF_CFG(pipe, plane)); |
| skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane], |
| val); |
| } |
| |
| val = I915_READ(CUR_BUF_CFG(pipe)); |
| skl_ddb_entry_init_from_hw(&ddb->cursor[pipe], val); |
| } |
| } |
| |
| static unsigned int |
| skl_plane_relative_data_rate(const struct intel_plane_wm_parameters *p) |
| { |
| return p->horiz_pixels * p->vert_pixels * p->bytes_per_pixel; |
| } |
| |
| /* |
| * We don't overflow 32 bits. Worst case is 3 planes enabled, each fetching |
| * a 8192x4096@32bpp framebuffer: |
| * 3 * 4096 * 8192 * 4 < 2^32 |
| */ |
| static unsigned int |
| skl_get_total_relative_data_rate(struct intel_crtc *intel_crtc, |
| const struct skl_pipe_wm_parameters *params) |
| { |
| unsigned int total_data_rate = 0; |
| int plane; |
| |
| for (plane = 0; plane < intel_num_planes(intel_crtc); plane++) { |
| const struct intel_plane_wm_parameters *p; |
| |
| p = ¶ms->plane[plane]; |
| if (!p->enabled) |
| continue; |
| |
| total_data_rate += skl_plane_relative_data_rate(p); |
| } |
| |
| return total_data_rate; |
| } |
| |
| static void |
| skl_allocate_pipe_ddb(struct drm_crtc *crtc, |
| const struct intel_wm_config *config, |
| const struct skl_pipe_wm_parameters *params, |
| struct skl_ddb_allocation *ddb /* out */) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| enum pipe pipe = intel_crtc->pipe; |
| struct skl_ddb_entry *alloc = &ddb->pipe[pipe]; |
| uint16_t alloc_size, start, cursor_blocks; |
| uint16_t minimum[I915_MAX_PLANES]; |
| unsigned int total_data_rate; |
| int plane; |
| |
| skl_ddb_get_pipe_allocation_limits(dev, crtc, config, params, alloc); |
| alloc_size = skl_ddb_entry_size(alloc); |
| if (alloc_size == 0) { |
| memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); |
| memset(&ddb->cursor[pipe], 0, sizeof(ddb->cursor[pipe])); |
| return; |
| } |
| |
| cursor_blocks = skl_cursor_allocation(config); |
| ddb->cursor[pipe].start = alloc->end - cursor_blocks; |
| ddb->cursor[pipe].end = alloc->end; |
| |
| alloc_size -= cursor_blocks; |
| alloc->end -= cursor_blocks; |
| |
| /* 1. Allocate the mininum required blocks for each active plane */ |
| for_each_plane(dev_priv, pipe, plane) { |
| const struct intel_plane_wm_parameters *p; |
| |
| p = ¶ms->plane[plane]; |
| if (!p->enabled) |
| continue; |
| |
| minimum[plane] = 8; |
| alloc_size -= minimum[plane]; |
| } |
| |
| /* |
| * 2. Distribute the remaining space in proportion to the amount of |
| * data each plane needs to fetch from memory. |
| * |
| * FIXME: we may not allocate every single block here. |
| */ |
| total_data_rate = skl_get_total_relative_data_rate(intel_crtc, params); |
| |
| start = alloc->start; |
| for (plane = 0; plane < intel_num_planes(intel_crtc); plane++) { |
| const struct intel_plane_wm_parameters *p; |
| unsigned int data_rate; |
| uint16_t plane_blocks; |
| |
| p = ¶ms->plane[plane]; |
| if (!p->enabled) |
| continue; |
| |
| data_rate = skl_plane_relative_data_rate(p); |
| |
| /* |
| * promote the expression to 64 bits to avoid overflowing, the |
| * result is < available as data_rate / total_data_rate < 1 |
| */ |
| plane_blocks = minimum[plane]; |
| plane_blocks += div_u64((uint64_t)alloc_size * data_rate, |
| total_data_rate); |
| |
| ddb->plane[pipe][plane].start = start; |
| ddb->plane[pipe][plane].end = start + plane_blocks; |
| |
| start += plane_blocks; |
| } |
| |
| } |
| |
| static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config) |
| { |
| /* TODO: Take into account the scalers once we support them */ |
| return config->base.adjusted_mode.crtc_clock; |
| } |
| |
| /* |
| * The max latency should be 257 (max the punit can code is 255 and we add 2us |
| * for the read latency) and bytes_per_pixel should always be <= 8, so that |
| * should allow pixel_rate up to ~2 GHz which seems sufficient since max |
| * 2xcdclk is 1350 MHz and the pixel rate should never exceed that. |
| */ |
| static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel, |
| uint32_t latency) |
| { |
| uint32_t wm_intermediate_val, ret; |
| |
| if (latency == 0) |
| return UINT_MAX; |
| |
| wm_intermediate_val = latency * pixel_rate * bytes_per_pixel / 512; |
| ret = DIV_ROUND_UP(wm_intermediate_val, 1000); |
| |
| return ret; |
| } |
| |
| static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal, |
| uint32_t horiz_pixels, uint8_t bytes_per_pixel, |
| uint64_t tiling, uint32_t latency) |
| { |
| uint32_t ret; |
| uint32_t plane_bytes_per_line, plane_blocks_per_line; |
| uint32_t wm_intermediate_val; |
| |
| if (latency == 0) |
| return UINT_MAX; |
| |
| plane_bytes_per_line = horiz_pixels * bytes_per_pixel; |
| |
| if (tiling == I915_FORMAT_MOD_Y_TILED || |
| tiling == I915_FORMAT_MOD_Yf_TILED) { |
| plane_bytes_per_line *= 4; |
| plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); |
| plane_blocks_per_line /= 4; |
| } else { |
| plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); |
| } |
| |
| wm_intermediate_val = latency * pixel_rate; |
| ret = DIV_ROUND_UP(wm_intermediate_val, pipe_htotal * 1000) * |
| plane_blocks_per_line; |
| |
| return ret; |
| } |
| |
| static bool skl_ddb_allocation_changed(const struct skl_ddb_allocation *new_ddb, |
| const struct intel_crtc *intel_crtc) |
| { |
| struct drm_device *dev = intel_crtc->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| const struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb; |
| enum pipe pipe = intel_crtc->pipe; |
| |
| if (memcmp(new_ddb->plane[pipe], cur_ddb->plane[pipe], |
| sizeof(new_ddb->plane[pipe]))) |
| return true; |
| |
| if (memcmp(&new_ddb->cursor[pipe], &cur_ddb->cursor[pipe], |
| sizeof(new_ddb->cursor[pipe]))) |
| return true; |
| |
| return false; |
| } |
| |
| static void skl_compute_wm_global_parameters(struct drm_device *dev, |
| struct intel_wm_config *config) |
| { |
| struct drm_crtc *crtc; |
| struct drm_plane *plane; |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) |
| config->num_pipes_active += to_intel_crtc(crtc)->active; |
| |
| /* FIXME: I don't think we need those two global parameters on SKL */ |
| list_for_each_entry(plane, &dev->mode_config.plane_list, head) { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| |
| config->sprites_enabled |= intel_plane->wm.enabled; |
| config->sprites_scaled |= intel_plane->wm.scaled; |
| } |
| } |
| |
| static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc, |
| struct skl_pipe_wm_parameters *p) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| enum pipe pipe = intel_crtc->pipe; |
| struct drm_plane *plane; |
| struct drm_framebuffer *fb; |
| int i = 1; /* Index for sprite planes start */ |
| |
| p->active = intel_crtc->active; |
| if (p->active) { |
| p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal; |
| p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config); |
| |
| /* |
| * For now, assume primary and cursor planes are always enabled. |
| */ |
| p->plane[0].enabled = true; |
| p->plane[0].bytes_per_pixel = |
| crtc->primary->state->fb->bits_per_pixel / 8; |
| p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w; |
| p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h; |
| p->plane[0].tiling = DRM_FORMAT_MOD_NONE; |
| fb = crtc->primary->state->fb; |
| /* |
| * Framebuffer can be NULL on plane disable, but it does not |
| * matter for watermarks if we assume no tiling in that case. |
| */ |
| if (fb) |
| p->plane[0].tiling = fb->modifier[0]; |
| |
| p->cursor.enabled = true; |
| p->cursor.bytes_per_pixel = 4; |
| p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ? |
| intel_crtc->base.cursor->state->crtc_w : 64; |
| } |
| |
| list_for_each_entry(plane, &dev->mode_config.plane_list, head) { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| |
| if (intel_plane->pipe == pipe && |
| plane->type == DRM_PLANE_TYPE_OVERLAY) |
| p->plane[i++] = intel_plane->wm; |
| } |
| } |
| |
| static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, |
| struct skl_pipe_wm_parameters *p, |
| struct intel_plane_wm_parameters *p_params, |
| uint16_t ddb_allocation, |
| int level, |
| uint16_t *out_blocks, /* out */ |
| uint8_t *out_lines /* out */) |
| { |
| uint32_t latency = dev_priv->wm.skl_latency[level]; |
| uint32_t method1, method2; |
| uint32_t plane_bytes_per_line, plane_blocks_per_line; |
| uint32_t res_blocks, res_lines; |
| uint32_t selected_result; |
| |
| if (latency == 0 || !p->active || !p_params->enabled) |
| return false; |
| |
| method1 = skl_wm_method1(p->pixel_rate, |
| p_params->bytes_per_pixel, |
| latency); |
| method2 = skl_wm_method2(p->pixel_rate, |
| p->pipe_htotal, |
| p_params->horiz_pixels, |
| p_params->bytes_per_pixel, |
| p_params->tiling, |
| latency); |
| |
| plane_bytes_per_line = p_params->horiz_pixels * |
| p_params->bytes_per_pixel; |
| plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); |
| |
| if (p_params->tiling == I915_FORMAT_MOD_Y_TILED || |
| p_params->tiling == I915_FORMAT_MOD_Yf_TILED) { |
| uint32_t y_tile_minimum = plane_blocks_per_line * 4; |
| selected_result = max(method2, y_tile_minimum); |
| } else { |
| if ((ddb_allocation / plane_blocks_per_line) >= 1) |
| selected_result = min(method1, method2); |
| else |
| selected_result = method1; |
| } |
| |
| res_blocks = selected_result + 1; |
| res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line); |
| |
| if (level >= 1 && level <= 7) { |
| if (p_params->tiling == I915_FORMAT_MOD_Y_TILED || |
| p_params->tiling == I915_FORMAT_MOD_Yf_TILED) |
| res_lines += 4; |
| else |
| res_blocks++; |
| } |
| |
| if (res_blocks >= ddb_allocation || res_lines > 31) |
| return false; |
| |
| *out_blocks = res_blocks; |
| *out_lines = res_lines; |
| |
| return true; |
| } |
| |
| static void skl_compute_wm_level(const struct drm_i915_private *dev_priv, |
| struct skl_ddb_allocation *ddb, |
| struct skl_pipe_wm_parameters *p, |
| enum pipe pipe, |
| int level, |
| int num_planes, |
| struct skl_wm_level *result) |
| { |
| uint16_t ddb_blocks; |
| int i; |
| |
| for (i = 0; i < num_planes; i++) { |
| ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][i]); |
| |
| result->plane_en[i] = skl_compute_plane_wm(dev_priv, |
| p, &p->plane[i], |
| ddb_blocks, |
| level, |
| &result->plane_res_b[i], |
| &result->plane_res_l[i]); |
| } |
| |
| ddb_blocks = skl_ddb_entry_size(&ddb->cursor[pipe]); |
| result->cursor_en = skl_compute_plane_wm(dev_priv, p, &p->cursor, |
| ddb_blocks, level, |
| &result->cursor_res_b, |
| &result->cursor_res_l); |
| } |
| |
| static uint32_t |
| skl_compute_linetime_wm(struct drm_crtc *crtc, struct skl_pipe_wm_parameters *p) |
| { |
| if (!to_intel_crtc(crtc)->active) |
| return 0; |
| |
| return DIV_ROUND_UP(8 * p->pipe_htotal * 1000, p->pixel_rate); |
| |
| } |
| |
| static void skl_compute_transition_wm(struct drm_crtc *crtc, |
| struct skl_pipe_wm_parameters *params, |
| struct skl_wm_level *trans_wm /* out */) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int i; |
| |
| if (!params->active) |
| return; |
| |
| /* Until we know more, just disable transition WMs */ |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) |
| trans_wm->plane_en[i] = false; |
| trans_wm->cursor_en = false; |
| } |
| |
| static void skl_compute_pipe_wm(struct drm_crtc *crtc, |
| struct skl_ddb_allocation *ddb, |
| struct skl_pipe_wm_parameters *params, |
| struct skl_pipe_wm *pipe_wm) |
| { |
| struct drm_device *dev = crtc->dev; |
| const struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int level, max_level = ilk_wm_max_level(dev); |
| |
| for (level = 0; level <= max_level; level++) { |
| skl_compute_wm_level(dev_priv, ddb, params, intel_crtc->pipe, |
| level, intel_num_planes(intel_crtc), |
| &pipe_wm->wm[level]); |
| } |
| pipe_wm->linetime = skl_compute_linetime_wm(crtc, params); |
| |
| skl_compute_transition_wm(crtc, params, &pipe_wm->trans_wm); |
| } |
| |
| static void skl_compute_wm_results(struct drm_device *dev, |
| struct skl_pipe_wm_parameters *p, |
| struct skl_pipe_wm *p_wm, |
| struct skl_wm_values *r, |
| struct intel_crtc *intel_crtc) |
| { |
| int level, max_level = ilk_wm_max_level(dev); |
| enum pipe pipe = intel_crtc->pipe; |
| uint32_t temp; |
| int i; |
| |
| for (level = 0; level <= max_level; level++) { |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) { |
| temp = 0; |
| |
| temp |= p_wm->wm[level].plane_res_l[i] << |
| PLANE_WM_LINES_SHIFT; |
| temp |= p_wm->wm[level].plane_res_b[i]; |
| if (p_wm->wm[level].plane_en[i]) |
| temp |= PLANE_WM_EN; |
| |
| r->plane[pipe][i][level] = temp; |
| } |
| |
| temp = 0; |
| |
| temp |= p_wm->wm[level].cursor_res_l << PLANE_WM_LINES_SHIFT; |
| temp |= p_wm->wm[level].cursor_res_b; |
| |
| if (p_wm->wm[level].cursor_en) |
| temp |= PLANE_WM_EN; |
| |
| r->cursor[pipe][level] = temp; |
| |
| } |
| |
| /* transition WMs */ |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) { |
| temp = 0; |
| temp |= p_wm->trans_wm.plane_res_l[i] << PLANE_WM_LINES_SHIFT; |
| temp |= p_wm->trans_wm.plane_res_b[i]; |
| if (p_wm->trans_wm.plane_en[i]) |
| temp |= PLANE_WM_EN; |
| |
| r->plane_trans[pipe][i] = temp; |
| } |
| |
| temp = 0; |
| temp |= p_wm->trans_wm.cursor_res_l << PLANE_WM_LINES_SHIFT; |
| temp |= p_wm->trans_wm.cursor_res_b; |
| if (p_wm->trans_wm.cursor_en) |
| temp |= PLANE_WM_EN; |
| |
| r->cursor_trans[pipe] = temp; |
| |
| r->wm_linetime[pipe] = p_wm->linetime; |
| } |
| |
| static void skl_ddb_entry_write(struct drm_i915_private *dev_priv, uint32_t reg, |
| const struct skl_ddb_entry *entry) |
| { |
| if (entry->end) |
| I915_WRITE(reg, (entry->end - 1) << 16 | entry->start); |
| else |
| I915_WRITE(reg, 0); |
| } |
| |
| static void skl_write_wm_values(struct drm_i915_private *dev_priv, |
| const struct skl_wm_values *new) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct intel_crtc *crtc; |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| int i, level, max_level = ilk_wm_max_level(dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (!new->dirty[pipe]) |
| continue; |
| |
| I915_WRITE(PIPE_WM_LINETIME(pipe), new->wm_linetime[pipe]); |
| |
| for (level = 0; level <= max_level; level++) { |
| for (i = 0; i < intel_num_planes(crtc); i++) |
| I915_WRITE(PLANE_WM(pipe, i, level), |
| new->plane[pipe][i][level]); |
| I915_WRITE(CUR_WM(pipe, level), |
| new->cursor[pipe][level]); |
| } |
| for (i = 0; i < intel_num_planes(crtc); i++) |
| I915_WRITE(PLANE_WM_TRANS(pipe, i), |
| new->plane_trans[pipe][i]); |
| I915_WRITE(CUR_WM_TRANS(pipe), new->cursor_trans[pipe]); |
| |
| for (i = 0; i < intel_num_planes(crtc); i++) |
| skl_ddb_entry_write(dev_priv, |
| PLANE_BUF_CFG(pipe, i), |
| &new->ddb.plane[pipe][i]); |
| |
| skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), |
| &new->ddb.cursor[pipe]); |
| } |
| } |
| |
| /* |
| * When setting up a new DDB allocation arrangement, we need to correctly |
| * sequence the times at which the new allocations for the pipes are taken into |
| * account or we'll have pipes fetching from space previously allocated to |
| * another pipe. |
| * |
| * Roughly the sequence looks like: |
| * 1. re-allocate the pipe(s) with the allocation being reduced and not |
| * overlapping with a previous light-up pipe (another way to put it is: |
| * pipes with their new allocation strickly included into their old ones). |
| * 2. re-allocate the other pipes that get their allocation reduced |
| * 3. allocate the pipes having their allocation increased |
| * |
| * Steps 1. and 2. are here to take care of the following case: |
| * - Initially DDB looks like this: |
| * | B | C | |
| * - enable pipe A. |
| * - pipe B has a reduced DDB allocation that overlaps with the old pipe C |
| * allocation |
| * | A | B | C | |
| * |
| * We need to sequence the re-allocation: C, B, A (and not B, C, A). |
| */ |
| |
| static void |
| skl_wm_flush_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, int pass) |
| { |
| int plane; |
| |
| DRM_DEBUG_KMS("flush pipe %c (pass %d)\n", pipe_name(pipe), pass); |
| |
| for_each_plane(dev_priv, pipe, plane) { |
| I915_WRITE(PLANE_SURF(pipe, plane), |
| I915_READ(PLANE_SURF(pipe, plane))); |
| } |
| I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe))); |
| } |
| |
| static bool |
| skl_ddb_allocation_included(const struct skl_ddb_allocation *old, |
| const struct skl_ddb_allocation *new, |
| enum pipe pipe) |
| { |
| uint16_t old_size, new_size; |
| |
| old_size = skl_ddb_entry_size(&old->pipe[pipe]); |
| new_size = skl_ddb_entry_size(&new->pipe[pipe]); |
| |
| return old_size != new_size && |
| new->pipe[pipe].start >= old->pipe[pipe].start && |
| new->pipe[pipe].end <= old->pipe[pipe].end; |
| } |
| |
| static void skl_flush_wm_values(struct drm_i915_private *dev_priv, |
| struct skl_wm_values *new_values) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct skl_ddb_allocation *cur_ddb, *new_ddb; |
| bool reallocated[I915_MAX_PIPES] = {false, false, false}; |
| struct intel_crtc *crtc; |
| enum pipe pipe; |
| |
| new_ddb = &new_values->ddb; |
| cur_ddb = &dev_priv->wm.skl_hw.ddb; |
| |
| /* |
| * First pass: flush the pipes with the new allocation contained into |
| * the old space. |
| * |
| * We'll wait for the vblank on those pipes to ensure we can safely |
| * re-allocate the freed space without this pipe fetching from it. |
| */ |
| for_each_intel_crtc(dev, crtc) { |
| if (!crtc->active) |
| continue; |
| |
| pipe = crtc->pipe; |
| |
| if (!skl_ddb_allocation_included(cur_ddb, new_ddb, pipe)) |
| continue; |
| |
| skl_wm_flush_pipe(dev_priv, pipe, 1); |
| intel_wait_for_vblank(dev, pipe); |
| |
| reallocated[pipe] = true; |
| } |
| |
| |
| /* |
| * Second pass: flush the pipes that are having their allocation |
| * reduced, but overlapping with a previous allocation. |
| * |
| * Here as well we need to wait for the vblank to make sure the freed |
| * space is not used anymore. |
| */ |
| for_each_intel_crtc(dev, crtc) { |
| if (!crtc->active) |
| continue; |
| |
| pipe = crtc->pipe; |
| |
| if (reallocated[pipe]) |
| continue; |
| |
| if (skl_ddb_entry_size(&new_ddb->pipe[pipe]) < |
| skl_ddb_entry_size(&cur_ddb->pipe[pipe])) { |
| skl_wm_flush_pipe(dev_priv, pipe, 2); |
| intel_wait_for_vblank(dev, pipe); |
| reallocated[pipe] = true; |
| } |
| } |
| |
| /* |
| * Third pass: flush the pipes that got more space allocated. |
| * |
| * We don't need to actively wait for the update here, next vblank |
| * will just get more DDB space with the correct WM values. |
| */ |
| for_each_intel_crtc(dev, crtc) { |
| if (!crtc->active) |
| continue; |
| |
| pipe = crtc->pipe; |
| |
| /* |
| * At this point, only the pipes more space than before are |
| * left to re-allocate. |
| */ |
| if (reallocated[pipe]) |
| continue; |
| |
| skl_wm_flush_pipe(dev_priv, pipe, 3); |
| } |
| } |
| |
| static bool skl_update_pipe_wm(struct drm_crtc *crtc, |
| struct skl_pipe_wm_parameters *params, |
| struct intel_wm_config *config, |
| struct skl_ddb_allocation *ddb, /* out */ |
| struct skl_pipe_wm *pipe_wm /* out */) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| |
| skl_compute_wm_pipe_parameters(crtc, params); |
| skl_allocate_pipe_ddb(crtc, config, params, ddb); |
| skl_compute_pipe_wm(crtc, ddb, params, pipe_wm); |
| |
| if (!memcmp(&intel_crtc->wm.skl_active, pipe_wm, sizeof(*pipe_wm))) |
| return false; |
| |
| intel_crtc->wm.skl_active = *pipe_wm; |
| return true; |
| } |
| |
| static void skl_update_other_pipe_wm(struct drm_device *dev, |
| struct drm_crtc *crtc, |
| struct intel_wm_config *config, |
| struct skl_wm_values *r) |
| { |
| struct intel_crtc *intel_crtc; |
| struct intel_crtc *this_crtc = to_intel_crtc(crtc); |
| |
| /* |
| * If the WM update hasn't changed the allocation for this_crtc (the |
| * crtc we are currently computing the new WM values for), other |
| * enabled crtcs will keep the same allocation and we don't need to |
| * recompute anything for them. |
| */ |
| if (!skl_ddb_allocation_changed(&r->ddb, this_crtc)) |
| return; |
| |
| /* |
| * Otherwise, because of this_crtc being freshly enabled/disabled, the |
| * other active pipes need new DDB allocation and WM values. |
| */ |
| list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, |
| base.head) { |
| struct skl_pipe_wm_parameters params = {}; |
| struct skl_pipe_wm pipe_wm = {}; |
| bool wm_changed; |
| |
| if (this_crtc->pipe == intel_crtc->pipe) |
| continue; |
| |
| if (!intel_crtc->active) |
| continue; |
| |
| wm_changed = skl_update_pipe_wm(&intel_crtc->base, |
| ¶ms, config, |
| &r->ddb, &pipe_wm); |
| |
| /* |
| * If we end up re-computing the other pipe WM values, it's |
| * because it was really needed, so we expect the WM values to |
| * be different. |
| */ |
| WARN_ON(!wm_changed); |
| |
| skl_compute_wm_results(dev, ¶ms, &pipe_wm, r, intel_crtc); |
| r->dirty[intel_crtc->pipe] = true; |
| } |
| } |
| |
| static void skl_update_wm(struct drm_crtc *crtc) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct skl_pipe_wm_parameters params = {}; |
| struct skl_wm_values *results = &dev_priv->wm.skl_results; |
| struct skl_pipe_wm pipe_wm = {}; |
| struct intel_wm_config config = {}; |
| |
| memset(results, 0, sizeof(*results)); |
| |
| skl_compute_wm_global_parameters(dev, &config); |
| |
| if (!skl_update_pipe_wm(crtc, ¶ms, &config, |
| &results->ddb, &pipe_wm)) |
| return; |
| |
| skl_compute_wm_results(dev, ¶ms, &pipe_wm, results, intel_crtc); |
| results->dirty[intel_crtc->pipe] = true; |
| |
| skl_update_other_pipe_wm(dev, crtc, &config, results); |
| skl_write_wm_values(dev_priv, results); |
| skl_flush_wm_values(dev_priv, results); |
| |
| /* store the new configuration */ |
| dev_priv->wm.skl_hw = *results; |
| } |
| |
| static void |
| skl_update_sprite_wm(struct drm_plane *plane, struct drm_crtc *crtc, |
| uint32_t sprite_width, uint32_t sprite_height, |
| int pixel_size, bool enabled, bool scaled) |
| { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct drm_framebuffer *fb = plane->state->fb; |
| |
| intel_plane->wm.enabled = enabled; |
| intel_plane->wm.scaled = scaled; |
| intel_plane->wm.horiz_pixels = sprite_width; |
| intel_plane->wm.vert_pixels = sprite_height; |
| intel_plane->wm.bytes_per_pixel = pixel_size; |
| intel_plane->wm.tiling = DRM_FORMAT_MOD_NONE; |
| /* |
| * Framebuffer can be NULL on plane disable, but it does not |
| * matter for watermarks if we assume no tiling in that case. |
| */ |
| if (fb) |
| intel_plane->wm.tiling = fb->modifier[0]; |
| |
| skl_update_wm(crtc); |
| } |
| |
| static void ilk_update_wm(struct drm_crtc *crtc) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct ilk_wm_maximums max; |
| struct ilk_pipe_wm_parameters params = {}; |
| struct ilk_wm_values results = {}; |
| enum intel_ddb_partitioning partitioning; |
| struct intel_pipe_wm pipe_wm = {}; |
| struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm; |
| struct intel_wm_config config = {}; |
| |
| ilk_compute_wm_parameters(crtc, ¶ms); |
| |
| intel_compute_pipe_wm(crtc, ¶ms, &pipe_wm); |
| |
| if (!memcmp(&intel_crtc->wm.active, &pipe_wm, sizeof(pipe_wm))) |
| return; |
| |
| intel_crtc->wm.active = pipe_wm; |
| |
| ilk_compute_wm_config(dev, &config); |
| |
| ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max); |
| ilk_wm_merge(dev, &config, &max, &lp_wm_1_2); |
| |
| /* 5/6 split only in single pipe config on IVB+ */ |
| if (INTEL_INFO(dev)->gen >= 7 && |
| config.num_pipes_active == 1 && config.sprites_enabled) { |
| ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_5_6, &max); |
| ilk_wm_merge(dev, &config, &max, &lp_wm_5_6); |
| |
| best_lp_wm = ilk_find_best_result(dev, &lp_wm_1_2, &lp_wm_5_6); |
| } else { |
| best_lp_wm = &lp_wm_1_2; |
| } |
| |
| partitioning = (best_lp_wm == &lp_wm_1_2) ? |
| INTEL_DDB_PART_1_2 : INTEL_DDB_PART_5_6; |
| |
| ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results); |
| |
| ilk_write_wm_values(dev_priv, &results); |
| } |
| |
| static void |
| ilk_update_sprite_wm(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| uint32_t sprite_width, uint32_t sprite_height, |
| int pixel_size, bool enabled, bool scaled) |
| { |
| struct drm_device *dev = plane->dev; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| |
| intel_plane->wm.enabled = enabled; |
| intel_plane->wm.scaled = scaled; |
| intel_plane->wm.horiz_pixels = sprite_width; |
| intel_plane->wm.vert_pixels = sprite_width; |
| intel_plane->wm.bytes_per_pixel = pixel_size; |
| |
| /* |
| * IVB workaround: must disable low power watermarks for at least |
| * one frame before enabling scaling. LP watermarks can be re-enabled |
| * when scaling is disabled. |
| * |
| * WaCxSRDisabledForSpriteScaling:ivb |
| */ |
| if (IS_IVYBRIDGE(dev) && scaled && ilk_disable_lp_wm(dev)) |
| intel_wait_for_vblank(dev, intel_plane->pipe); |
| |
| ilk_update_wm(crtc); |
| } |
| |
| static void skl_pipe_wm_active_state(uint32_t val, |
| struct skl_pipe_wm *active, |
| bool is_transwm, |
| bool is_cursor, |
| int i, |
| int level) |
| { |
| bool is_enabled = (val & PLANE_WM_EN) != 0; |
| |
| if (!is_transwm) { |
| if (!is_cursor) { |
| active->wm[level].plane_en[i] = is_enabled; |
| active->wm[level].plane_res_b[i] = |
| val & PLANE_WM_BLOCKS_MASK; |
| active->wm[level].plane_res_l[i] = |
| (val >> PLANE_WM_LINES_SHIFT) & |
| PLANE_WM_LINES_MASK; |
| } else { |
| active->wm[level].cursor_en = is_enabled; |
| active->wm[level].cursor_res_b = |
| val & PLANE_WM_BLOCKS_MASK; |
| active->wm[level].cursor_res_l = |
| (val >> PLANE_WM_LINES_SHIFT) & |
| PLANE_WM_LINES_MASK; |
| } |
| } else { |
| if (!is_cursor) { |
| active->trans_wm.plane_en[i] = is_enabled; |
| active->trans_wm.plane_res_b[i] = |
| val & PLANE_WM_BLOCKS_MASK; |
| active->trans_wm.plane_res_l[i] = |
| (val >> PLANE_WM_LINES_SHIFT) & |
| PLANE_WM_LINES_MASK; |
| } else { |
| active->trans_wm.cursor_en = is_enabled; |
| active->trans_wm.cursor_res_b = |
| val & PLANE_WM_BLOCKS_MASK; |
| active->trans_wm.cursor_res_l = |
| (val >> PLANE_WM_LINES_SHIFT) & |
| PLANE_WM_LINES_MASK; |
| } |
| } |
| } |
| |
| static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct skl_wm_values *hw = &dev_priv->wm.skl_hw; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct skl_pipe_wm *active = &intel_crtc->wm.skl_active; |
| enum pipe pipe = intel_crtc->pipe; |
| int level, i, max_level; |
| uint32_t temp; |
| |
| max_level = ilk_wm_max_level(dev); |
| |
| hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe)); |
| |
| for (level = 0; level <= max_level; level++) { |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) |
| hw->plane[pipe][i][level] = |
| I915_READ(PLANE_WM(pipe, i, level)); |
| hw->cursor[pipe][level] = I915_READ(CUR_WM(pipe, level)); |
| } |
| |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) |
| hw->plane_trans[pipe][i] = I915_READ(PLANE_WM_TRANS(pipe, i)); |
| hw->cursor_trans[pipe] = I915_READ(CUR_WM_TRANS(pipe)); |
| |
| if (!intel_crtc->active) |
| return; |
| |
| hw->dirty[pipe] = true; |
| |
| active->linetime = hw->wm_linetime[pipe]; |
| |
| for (level = 0; level <= max_level; level++) { |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) { |
| temp = hw->plane[pipe][i][level]; |
| skl_pipe_wm_active_state(temp, active, false, |
| false, i, level); |
| } |
| temp = hw->cursor[pipe][level]; |
| skl_pipe_wm_active_state(temp, active, false, true, i, level); |
| } |
| |
| for (i = 0; i < intel_num_planes(intel_crtc); i++) { |
| temp = hw->plane_trans[pipe][i]; |
| skl_pipe_wm_active_state(temp, active, true, false, i, 0); |
| } |
| |
| temp = hw->cursor_trans[pipe]; |
| skl_pipe_wm_active_state(temp, active, true, true, i, 0); |
| } |
| |
| void skl_wm_get_hw_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb; |
| struct drm_crtc *crtc; |
| |
| skl_ddb_get_hw_state(dev_priv, ddb); |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) |
| skl_pipe_wm_get_hw_state(crtc); |
| } |
| |
| static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct ilk_wm_values *hw = &dev_priv->wm.hw; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_pipe_wm *active = &intel_crtc->wm.active; |
| enum pipe pipe = intel_crtc->pipe; |
| static const unsigned int wm0_pipe_reg[] = { |
| [PIPE_A] = WM0_PIPEA_ILK, |
| [PIPE_B] = WM0_PIPEB_ILK, |
| [PIPE_C] = WM0_PIPEC_IVB, |
| }; |
| |
| hw->wm_pipe[pipe] = I915_READ(wm0_pipe_reg[pipe]); |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe)); |
| |
| active->pipe_enabled = intel_crtc->active; |
| |
| if (active->pipe_enabled) { |
| u32 tmp = hw->wm_pipe[pipe]; |
| |
| /* |
| * For active pipes LP0 watermark is marked as |
| * enabled, and LP1+ watermaks as disabled since |
| * we can't really reverse compute them in case |
| * multiple pipes are active. |
| */ |
| active->wm[0].enable = true; |
| active->wm[0].pri_val = (tmp & WM0_PIPE_PLANE_MASK) >> WM0_PIPE_PLANE_SHIFT; |
| active->wm[0].spr_val = (tmp & WM0_PIPE_SPRITE_MASK) >> WM0_PIPE_SPRITE_SHIFT; |
| active->wm[0].cur_val = tmp & WM0_PIPE_CURSOR_MASK; |
| active->linetime = hw->wm_linetime[pipe]; |
| } else { |
| int level, max_level = ilk_wm_max_level(dev); |
| |
| /* |
| * For inactive pipes, all watermark levels |
| * should be marked as enabled but zeroed, |
| * which is what we'd compute them to. |
| */ |
| for (level = 0; level <= max_level; level++) |
| active->wm[level].enable = true; |
| } |
| } |
| |
| void ilk_wm_get_hw_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct ilk_wm_values *hw = &dev_priv->wm.hw; |
| struct drm_crtc *crtc; |
| |
| for_each_crtc(dev, crtc) |
| ilk_pipe_wm_get_hw_state(crtc); |
| |
| hw->wm_lp[0] = I915_READ(WM1_LP_ILK); |
| hw->wm_lp[1] = I915_READ(WM2_LP_ILK); |
| hw->wm_lp[2] = I915_READ(WM3_LP_ILK); |
| |
| hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK); |
| if (INTEL_INFO(dev)->gen >= 7) { |
| hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB); |
| hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB); |
| } |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ? |
| INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2; |
| else if (IS_IVYBRIDGE(dev)) |
| hw->partitioning = (I915_READ(DISP_ARB_CTL2) & DISP_DATA_PARTITION_5_6) ? |
| INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2; |
| |
| hw->enable_fbc_wm = |
| !(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS); |
| } |
| |
| /** |
| * intel_update_watermarks - update FIFO watermark values based on current modes |
| * |
| * Calculate watermark values for the various WM regs based on current mode |
| * and plane configuration. |
| * |
| * There are several cases to deal with here: |
| * - normal (i.e. non-self-refresh) |
| * - self-refresh (SR) mode |
| * - lines are large relative to FIFO size (buffer can hold up to 2) |
| * - lines are small relative to FIFO size (buffer can hold more than 2 |
| * lines), so need to account for TLB latency |
| * |
| * The normal calculation is: |
| * watermark = dotclock * bytes per pixel * latency |
| * where latency is platform & configuration dependent (we assume pessimal |
| * values here). |
| * |
| * The SR calculation is: |
| * watermark = (trunc(latency/line time)+1) * surface width * |
| * bytes per pixel |
| * where |
| * line time = htotal / dotclock |
| * surface width = hdisplay for normal plane and 64 for cursor |
| * and latency is assumed to be high, as above. |
| * |
| * The final value programmed to the register should always be rounded up, |
| * and include an extra 2 entries to account for clock crossings. |
| * |
| * We don't use the sprite, so we can ignore that. And on Crestline we have |
| * to set the non-SR watermarks to 8. |
| */ |
| void intel_update_watermarks(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->dev->dev_private; |
| |
| if (dev_priv->display.update_wm) |
| dev_priv->display.update_wm(crtc); |
| } |
| |
| void intel_update_sprite_watermarks(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| uint32_t sprite_width, |
| uint32_t sprite_height, |
| int pixel_size, |
| bool enabled, bool scaled) |
| { |
| struct drm_i915_private *dev_priv = plane->dev->dev_private; |
| |
| if (dev_priv->display.update_sprite_wm) |
| dev_priv->display.update_sprite_wm(plane, crtc, |
| sprite_width, sprite_height, |
| pixel_size, enabled, scaled); |
| } |
| |
| /** |
| * Lock protecting IPS related data structures |
| */ |
| DEFINE_SPINLOCK(mchdev_lock); |
| |
| /* Global for IPS driver to get at the current i915 device. Protected by |
| * mchdev_lock. */ |
| static struct drm_i915_private *i915_mch_dev; |
| |
| bool ironlake_set_drps(struct drm_device *dev, u8 val) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u16 rgvswctl; |
| |
| assert_spin_locked(&mchdev_lock); |
| |
| rgvswctl = I915_READ16(MEMSWCTL); |
| if (rgvswctl & MEMCTL_CMD_STS) { |
| DRM_DEBUG("gpu busy, RCS change rejected\n"); |
| return false; /* still busy with another command */ |
| } |
| |
| rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) | |
| (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM; |
| I915_WRITE16(MEMSWCTL, rgvswctl); |
| POSTING_READ16(MEMSWCTL); |
| |
| rgvswctl |= MEMCTL_CMD_STS; |
| I915_WRITE16(MEMSWCTL, rgvswctl); |
| |
| return true; |
| } |
| |
| static void ironlake_enable_drps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 rgvmodectl = I915_READ(MEMMODECTL); |
| u8 fmax, fmin, fstart, vstart; |
| |
| spin_lock_irq(&mchdev_lock); |
| |
| /* Enable temp reporting */ |
| I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN); |
| I915_WRITE16(TSC1, I915_READ(TSC1) | TSE); |
| |
| /* 100ms RC evaluation intervals */ |
| I915_WRITE(RCUPEI, 100000); |
| I915_WRITE(RCDNEI, 100000); |
| |
| /* Set max/min thresholds to 90ms and 80ms respectively */ |
| I915_WRITE(RCBMAXAVG, 90000); |
| I915_WRITE(RCBMINAVG, 80000); |
| |
| I915_WRITE(MEMIHYST, 1); |
| |
| /* Set up min, max, and cur for interrupt handling */ |
| fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT; |
| fmin = (rgvmodectl & MEMMODE_FMIN_MASK); |
| fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >> |
| MEMMODE_FSTART_SHIFT; |
| |
| vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> |
| PXVFREQ_PX_SHIFT; |
| |
| dev_priv->ips.fmax = fmax; /* IPS callback will increase this */ |
| dev_priv->ips.fstart = fstart; |
| |
| dev_priv->ips.max_delay = fstart; |
| dev_priv->ips.min_delay = fmin; |
| dev_priv->ips.cur_delay = fstart; |
| |
| DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", |
| fmax, fmin, fstart); |
| |
| I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN); |
| |
| /* |
| * Interrupts will be enabled in ironlake_irq_postinstall |
| */ |
| |
| I915_WRITE(VIDSTART, vstart); |
| POSTING_READ(VIDSTART); |
| |
| rgvmodectl |= MEMMODE_SWMODE_EN; |
| I915_WRITE(MEMMODECTL, rgvmodectl); |
| |
| if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10)) |
| DRM_ERROR("stuck trying to change perf mode\n"); |
| mdelay(1); |
| |
| ironlake_set_drps(dev, fstart); |
| |
| dev_priv->ips.last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) + |
| I915_READ(0x112e0); |
| dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies); |
| dev_priv->ips.last_count2 = I915_READ(0x112f4); |
| dev_priv->ips.last_time2 = ktime_get_raw_ns(); |
| |
| spin_unlock_irq(&mchdev_lock); |
| } |
| |
| static void ironlake_disable_drps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u16 rgvswctl; |
| |
| spin_lock_irq(&mchdev_lock); |
| |
| rgvswctl = I915_READ16(MEMSWCTL); |
| |
| /* Ack interrupts, disable EFC interrupt */ |
| I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN); |
| I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG); |
| I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT); |
| I915_WRITE(DEIIR, DE_PCU_EVENT); |
| I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT); |
| |
| /* Go back to the starting frequency */ |
| ironlake_set_drps(dev, dev_priv->ips.fstart); |
| mdelay(1); |
| rgvswctl |= MEMCTL_CMD_STS; |
| I915_WRITE(MEMSWCTL, rgvswctl); |
| mdelay(1); |
| |
| spin_unlock_irq(&mchdev_lock); |
| } |
| |
| /* There's a funny hw issue where the hw returns all 0 when reading from |
| * GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value |
| * ourselves, instead of doing a rmw cycle (which might result in us clearing |
| * all limits and the gpu stuck at whatever frequency it is at atm). |
| */ |
| static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val) |
| { |
| u32 limits; |
| |
| /* Only set the down limit when we've reached the lowest level to avoid |
| * getting more interrupts, otherwise leave this clear. This prevents a |
| * race in the hw when coming out of rc6: There's a tiny window where |
| * the hw runs at the minimal clock before selecting the desired |
| * frequency, if the down threshold expires in that window we will not |
| * receive a down interrupt. */ |
| limits = dev_priv->rps.max_freq_softlimit << 24; |
| if (val <= dev_priv->rps.min_freq_softlimit) |
| limits |= dev_priv->rps.min_freq_softlimit << 16; |
| |
| return limits; |
| } |
| |
| static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val) |
| { |
| int new_power; |
| |
| new_power = dev_priv->rps.power; |
| switch (dev_priv->rps.power) { |
| case LOW_POWER: |
| if (val > dev_priv->rps.efficient_freq + 1 && val > dev_priv->rps.cur_freq) |
| new_power = BETWEEN; |
| break; |
| |
| case BETWEEN: |
| if (val <= dev_priv->rps.efficient_freq && val < dev_priv->rps.cur_freq) |
| new_power = LOW_POWER; |
| else if (val >= dev_priv->rps.rp0_freq && val > dev_priv->rps.cur_freq) |
| new_power = HIGH_POWER; |
| break; |
| |
| case HIGH_POWER: |
| if (val < (dev_priv->rps.rp1_freq + dev_priv->rps.rp0_freq) >> 1 && val < dev_priv->rps.cur_freq) |
| new_power = BETWEEN; |
| break; |
| } |
| /* Max/min bins are special */ |
| if (val == dev_priv->rps.min_freq_softlimit) |
| new_power = LOW_POWER; |
| if (val == dev_priv->rps.max_freq_softlimit) |
| new_power = HIGH_POWER; |
| if (new_power == dev_priv->rps.power) |
| return; |
| |
| /* Note the units here are not exactly 1us, but 1280ns. */ |
| switch (new_power) { |
| case LOW_POWER: |
| /* Upclock if more than 95% busy over 16ms */ |
| I915_WRITE(GEN6_RP_UP_EI, 12500); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 11800); |
| |
| /* Downclock if less than 85% busy over 32ms */ |
| I915_WRITE(GEN6_RP_DOWN_EI, 25000); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 21250); |
| |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| break; |
| |
| case BETWEEN: |
| /* Upclock if more than 90% busy over 13ms */ |
| I915_WRITE(GEN6_RP_UP_EI, 10250); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 9225); |
| |
| /* Downclock if less than 75% busy over 32ms */ |
| I915_WRITE(GEN6_RP_DOWN_EI, 25000); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 18750); |
| |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| break; |
| |
| case HIGH_POWER: |
| /* Upclock if more than 85% busy over 10ms */ |
| I915_WRITE(GEN6_RP_UP_EI, 8000); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 6800); |
| |
| /* Downclock if less than 60% busy over 32ms */ |
| I915_WRITE(GEN6_RP_DOWN_EI, 25000); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 15000); |
| |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| break; |
| } |
| |
| dev_priv->rps.power = new_power; |
| dev_priv->rps.last_adj = 0; |
| } |
| |
| static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val) |
| { |
| u32 mask = 0; |
| |
| if (val > dev_priv->rps.min_freq_softlimit) |
| mask |= GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT; |
| if (val < dev_priv->rps.max_freq_softlimit) |
| mask |= GEN6_PM_RP_UP_THRESHOLD; |
| |
| mask |= dev_priv->pm_rps_events & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED); |
| mask &= dev_priv->pm_rps_events; |
| |
| return gen6_sanitize_rps_pm_mask(dev_priv, ~mask); |
| } |
| |
| /* gen6_set_rps is called to update the frequency request, but should also be |
| * called when the range (min_delay and max_delay) is modified so that we can |
| * update the GEN6_RP_INTERRUPT_LIMITS register accordingly. */ |
| static void gen6_set_rps(struct drm_device *dev, u8 val) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| WARN_ON(val > dev_priv->rps.max_freq_softlimit); |
| WARN_ON(val < dev_priv->rps.min_freq_softlimit); |
| |
| /* min/max delay may still have been modified so be sure to |
| * write the limits value. |
| */ |
| if (val != dev_priv->rps.cur_freq) { |
| gen6_set_rps_thresholds(dev_priv, val); |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| I915_WRITE(GEN6_RPNSWREQ, |
| HSW_FREQUENCY(val)); |
| else |
| I915_WRITE(GEN6_RPNSWREQ, |
| GEN6_FREQUENCY(val) | |
| GEN6_OFFSET(0) | |
| GEN6_AGGRESSIVE_TURBO); |
| } |
| |
| /* Make sure we continue to get interrupts |
| * until we hit the minimum or maximum frequencies. |
| */ |
| I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, gen6_rps_limits(dev_priv, val)); |
| I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); |
| |
| POSTING_READ(GEN6_RPNSWREQ); |
| |
| dev_priv->rps.cur_freq = val; |
| trace_intel_gpu_freq_change(val * 50); |
| } |
| |
| static void valleyview_set_rps(struct drm_device *dev, u8 val) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| WARN_ON(val > dev_priv->rps.max_freq_softlimit); |
| WARN_ON(val < dev_priv->rps.min_freq_softlimit); |
| |
| if (WARN_ONCE(IS_CHERRYVIEW(dev) && (val & 1), |
| "Odd GPU freq value\n")) |
| val &= ~1; |
| |
| if (val != dev_priv->rps.cur_freq) |
| vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); |
| |
| I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); |
| |
| dev_priv->rps.cur_freq = val; |
| trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val)); |
| } |
| |
| /* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down |
| * |
| * * If Gfx is Idle, then |
| * 1. Mask Turbo interrupts |
| * 2. Bring up Gfx clock |
| * 3. Change the freq to Rpn and wait till P-Unit updates freq |
| * 4. Clear the Force GFX CLK ON bit so that Gfx can down |
| * 5. Unmask Turbo interrupts |
| */ |
| static void vlv_set_rps_idle(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| /* CHV and latest VLV don't need to force the gfx clock */ |
| if (IS_CHERRYVIEW(dev) || dev->pdev->revision >= 0xd) { |
| valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); |
| return; |
| } |
| |
| /* |
| * When we are idle. Drop to min voltage state. |
| */ |
| |
| if (dev_priv->rps.cur_freq <= dev_priv->rps.min_freq_softlimit) |
| return; |
| |
| /* Mask turbo interrupt so that they will not come in between */ |
| I915_WRITE(GEN6_PMINTRMSK, |
| gen6_sanitize_rps_pm_mask(dev_priv, ~0)); |
| |
| vlv_force_gfx_clock(dev_priv, true); |
| |
| dev_priv->rps.cur_freq = dev_priv->rps.min_freq_softlimit; |
| |
| vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, |
| dev_priv->rps.min_freq_softlimit); |
| |
| if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS)) |
| & GENFREQSTATUS) == 0, 100)) |
| DRM_ERROR("timed out waiting for Punit\n"); |
| |
| vlv_force_gfx_clock(dev_priv, false); |
| |
| I915_WRITE(GEN6_PMINTRMSK, |
| gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq)); |
| } |
| |
| void gen6_rps_idle(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| if (dev_priv->rps.enabled) { |
| if (IS_VALLEYVIEW(dev)) |
| vlv_set_rps_idle(dev_priv); |
| else |
| gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); |
| dev_priv->rps.last_adj = 0; |
| } |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| void gen6_rps_boost(struct drm_i915_private *dev_priv) |
| { |
| mutex_lock(&dev_priv->rps.hw_lock); |
| if (dev_priv->rps.enabled) { |
| intel_set_rps(dev_priv->dev, dev_priv->rps.max_freq_softlimit); |
| dev_priv->rps.last_adj = 0; |
| } |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| void intel_set_rps(struct drm_device *dev, u8 val) |
| { |
| if (IS_VALLEYVIEW(dev)) |
| valleyview_set_rps(dev, val); |
| else |
| gen6_set_rps(dev, val); |
| } |
| |
| static void gen9_disable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| I915_WRITE(GEN9_PG_ENABLE, 0); |
| } |
| |
| static void gen6_disable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| I915_WRITE(GEN6_RPNSWREQ, 1 << 31); |
| } |
| |
| static void cherryview_disable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| } |
| |
| static void valleyview_disable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* we're doing forcewake before Disabling RC6, |
| * This what the BIOS expects when going into suspend */ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static void intel_print_rc6_info(struct drm_device *dev, u32 mode) |
| { |
| if (IS_VALLEYVIEW(dev)) { |
| if (mode & (GEN7_RC_CTL_TO_MODE | GEN6_RC_CTL_EI_MODE(1))) |
| mode = GEN6_RC_CTL_RC6_ENABLE; |
| else |
| mode = 0; |
| } |
| if (HAS_RC6p(dev)) |
| DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s RC6p %s RC6pp %s\n", |
| (mode & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off", |
| (mode & GEN6_RC_CTL_RC6p_ENABLE) ? "on" : "off", |
| (mode & GEN6_RC_CTL_RC6pp_ENABLE) ? "on" : "off"); |
| |
| else |
| DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s\n", |
| (mode & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off"); |
| } |
| |
| static int sanitize_rc6_option(const struct drm_device *dev, int enable_rc6) |
| { |
| /* No RC6 before Ironlake */ |
| if (INTEL_INFO(dev)->gen < 5) |
| return 0; |
| |
| /* RC6 is only on Ironlake mobile not on desktop */ |
| if (INTEL_INFO(dev)->gen == 5 && !IS_IRONLAKE_M(dev)) |
| return 0; |
| |
| /* Respect the kernel parameter if it is set */ |
| if (enable_rc6 >= 0) { |
| int mask; |
| |
| if (HAS_RC6p(dev)) |
| mask = INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE | |
| INTEL_RC6pp_ENABLE; |
| else |
| mask = INTEL_RC6_ENABLE; |
| |
| if ((enable_rc6 & mask) != enable_rc6) |
| DRM_DEBUG_KMS("Adjusting RC6 mask to %d (requested %d, valid %d)\n", |
| enable_rc6 & mask, enable_rc6, mask); |
| |
| return enable_rc6 & mask; |
| } |
| |
| /* Disable RC6 on Ironlake */ |
| if (INTEL_INFO(dev)->gen == 5) |
| return 0; |
| |
| if (IS_IVYBRIDGE(dev)) |
| return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE); |
| |
| return INTEL_RC6_ENABLE; |
| } |
| |
| int intel_enable_rc6(const struct drm_device *dev) |
| { |
| return i915.enable_rc6; |
| } |
| |
| static void gen6_init_rps_frequencies(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t rp_state_cap; |
| u32 ddcc_status = 0; |
| int ret; |
| |
| rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); |
| /* All of these values are in units of 50MHz */ |
| dev_priv->rps.cur_freq = 0; |
| /* static values from HW: RP0 > RP1 > RPn (min_freq) */ |
| dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; |
| dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; |
| dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; |
| /* hw_max = RP0 until we check for overclocking */ |
| dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; |
| |
| dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| ret = sandybridge_pcode_read(dev_priv, |
| HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL, |
| &ddcc_status); |
| if (0 == ret) |
| dev_priv->rps.efficient_freq = |
| clamp_t(u8, |
| ((ddcc_status >> 8) & 0xff), |
| dev_priv->rps.min_freq, |
| dev_priv->rps.max_freq); |
| } |
| |
| /* Preserve min/max settings in case of re-init */ |
| if (dev_priv->rps.max_freq_softlimit == 0) |
| dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; |
| |
| if (dev_priv->rps.min_freq_softlimit == 0) { |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| dev_priv->rps.min_freq_softlimit = |
| /* max(RPe, 450 MHz) */ |
| max(dev_priv->rps.efficient_freq, (u8) 9); |
| else |
| dev_priv->rps.min_freq_softlimit = |
| dev_priv->rps.min_freq; |
| } |
| } |
| |
| /* See the Gen9_GT_PM_Programming_Guide doc for the below */ |
| static void gen9_enable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| gen6_init_rps_frequencies(dev); |
| |
| I915_WRITE(GEN6_RPNSWREQ, 0xc800000); |
| I915_WRITE(GEN6_RC_VIDEO_FREQ, 0xc800000); |
| |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 0xf4240); |
| I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 0x12060000); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 0xe808); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 0x3bd08); |
| I915_WRITE(GEN6_RP_UP_EI, 0x101d0); |
| I915_WRITE(GEN6_RP_DOWN_EI, 0x55730); |
| I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa); |
| I915_WRITE(GEN6_PMINTRMSK, 0x6); |
| I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_MODE | GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| |
| gen6_enable_rps_interrupts(dev); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static void gen9_enable_rc6(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring; |
| uint32_t rc6_mask = 0; |
| int unused; |
| |
| /* 1a: Software RC state - RC0 */ |
| I915_WRITE(GEN6_RC_STATE, 0); |
| |
| /* 1b: Get forcewake during program sequence. Although the driver |
| * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| /* 2a: Disable RC states. */ |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| /* 2b: Program RC6 thresholds.*/ |
| I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16); |
| I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ |
| I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ |
| for_each_ring(ring, dev_priv, unused) |
| I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); |
| I915_WRITE(GEN6_RC_SLEEP, 0); |
| I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ |
| |
| /* 2c: Program Coarse Power Gating Policies. */ |
| I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 25); |
| I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 25); |
| |
| /* 3a: Enable RC6 */ |
| if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE) |
| rc6_mask = GEN6_RC_CTL_RC6_ENABLE; |
| DRM_INFO("RC6 %s\n", (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? |
| "on" : "off"); |
| I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | |
| GEN6_RC_CTL_EI_MODE(1) | |
| rc6_mask); |
| |
| /* 3b: Enable Coarse Power Gating only when RC6 is enabled */ |
| I915_WRITE(GEN9_PG_ENABLE, (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? 3 : 0); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| |
| } |
| |
| static void gen8_enable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring; |
| uint32_t rc6_mask = 0; |
| int unused; |
| |
| /* 1a: Software RC state - RC0 */ |
| I915_WRITE(GEN6_RC_STATE, 0); |
| |
| /* 1c & 1d: Get forcewake during program sequence. Although the driver |
| * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| /* 2a: Disable RC states. */ |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| /* Initialize rps frequencies */ |
| gen6_init_rps_frequencies(dev); |
| |
| /* 2b: Program RC6 thresholds.*/ |
| I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); |
| I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ |
| I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ |
| for_each_ring(ring, dev_priv, unused) |
| I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); |
| I915_WRITE(GEN6_RC_SLEEP, 0); |
| if (IS_BROADWELL(dev)) |
| I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us/1.28 for TO */ |
| else |
| I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */ |
| |
| /* 3: Enable RC6 */ |
| if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE) |
| rc6_mask = GEN6_RC_CTL_RC6_ENABLE; |
| intel_print_rc6_info(dev, rc6_mask); |
| if (IS_BROADWELL(dev)) |
| I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | |
| GEN7_RC_CTL_TO_MODE | |
| rc6_mask); |
| else |
| I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | |
| GEN6_RC_CTL_EI_MODE(1) | |
| rc6_mask); |
| |
| /* 4 Program defaults and thresholds for RPS*/ |
| I915_WRITE(GEN6_RPNSWREQ, |
| HSW_FREQUENCY(dev_priv->rps.rp1_freq)); |
| I915_WRITE(GEN6_RC_VIDEO_FREQ, |
| HSW_FREQUENCY(dev_priv->rps.rp1_freq)); |
| /* NB: Docs say 1s, and 1000000 - which aren't equivalent */ |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */ |
| |
| /* Docs recommend 900MHz, and 300 MHz respectively */ |
| I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, |
| dev_priv->rps.max_freq_softlimit << 24 | |
| dev_priv->rps.min_freq_softlimit << 16); |
| |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */ |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/ |
| I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */ |
| I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */ |
| |
| I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); |
| |
| /* 5: Enable RPS */ |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| |
| /* 6: Ring frequency + overclocking (our driver does this later */ |
| |
| dev_priv->rps.power = HIGH_POWER; /* force a reset */ |
| gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static void gen6_enable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring; |
| u32 rc6vids, pcu_mbox = 0, rc6_mask = 0; |
| u32 gtfifodbg; |
| int rc6_mode; |
| int i, ret; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| /* Here begins a magic sequence of register writes to enable |
| * auto-downclocking. |
| * |
| * Perhaps there might be some value in exposing these to |
| * userspace... |
| */ |
| I915_WRITE(GEN6_RC_STATE, 0); |
| |
| /* Clear the DBG now so we don't confuse earlier errors */ |
| if ((gtfifodbg = I915_READ(GTFIFODBG))) { |
| DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg); |
| I915_WRITE(GTFIFODBG, gtfifodbg); |
| } |
| |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| /* Initialize rps frequencies */ |
| gen6_init_rps_frequencies(dev); |
| |
| /* disable the counters and set deterministic thresholds */ |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16); |
| I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30); |
| I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30); |
| I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); |
| I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); |
| |
| for_each_ring(ring, dev_priv, i) |
| I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); |
| |
| I915_WRITE(GEN6_RC_SLEEP, 0); |
| I915_WRITE(GEN6_RC1e_THRESHOLD, 1000); |
| if (IS_IVYBRIDGE(dev)) |
| I915_WRITE(GEN6_RC6_THRESHOLD, 125000); |
| else |
| I915_WRITE(GEN6_RC6_THRESHOLD, 50000); |
| I915_WRITE(GEN6_RC6p_THRESHOLD, 150000); |
| I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ |
| |
| /* Check if we are enabling RC6 */ |
| rc6_mode = intel_enable_rc6(dev_priv->dev); |
| if (rc6_mode & INTEL_RC6_ENABLE) |
| rc6_mask |= GEN6_RC_CTL_RC6_ENABLE; |
| |
| /* We don't use those on Haswell */ |
| if (!IS_HASWELL(dev)) { |
| if (rc6_mode & INTEL_RC6p_ENABLE) |
| rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE; |
| |
| if (rc6_mode & INTEL_RC6pp_ENABLE) |
| rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE; |
| } |
| |
| intel_print_rc6_info(dev, rc6_mask); |
| |
| I915_WRITE(GEN6_RC_CONTROL, |
| rc6_mask | |
| GEN6_RC_CTL_EI_MODE(1) | |
| GEN6_RC_CTL_HW_ENABLE); |
| |
| /* Power down if completely idle for over 50ms */ |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 50000); |
| I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); |
| |
| ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0); |
| if (ret) |
| DRM_DEBUG_DRIVER("Failed to set the min frequency\n"); |
| |
| ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox); |
| if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */ |
| DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n", |
| (dev_priv->rps.max_freq_softlimit & 0xff) * 50, |
| (pcu_mbox & 0xff) * 50); |
| dev_priv->rps.max_freq = pcu_mbox & 0xff; |
| } |
| |
| dev_priv->rps.power = HIGH_POWER; /* force a reset */ |
| gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); |
| |
| rc6vids = 0; |
| ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids); |
| if (IS_GEN6(dev) && ret) { |
| DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n"); |
| } else if (IS_GEN6(dev) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) { |
| DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n", |
| GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450); |
| rc6vids &= 0xffff00; |
| rc6vids |= GEN6_ENCODE_RC6_VID(450); |
| ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids); |
| if (ret) |
| DRM_ERROR("Couldn't fix incorrect rc6 voltage\n"); |
| } |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static void __gen6_update_ring_freq(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int min_freq = 15; |
| unsigned int gpu_freq; |
| unsigned int max_ia_freq, min_ring_freq; |
| int scaling_factor = 180; |
| struct cpufreq_policy *policy; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| policy = cpufreq_cpu_get(0); |
| if (policy) { |
| max_ia_freq = policy->cpuinfo.max_freq; |
| cpufreq_cpu_put(policy); |
| } else { |
| /* |
| * Default to measured freq if none found, PCU will ensure we |
| * don't go over |
| */ |
| max_ia_freq = tsc_khz; |
| } |
| |
| /* Convert from kHz to MHz */ |
| max_ia_freq /= 1000; |
| |
| min_ring_freq = I915_READ(DCLK) & 0xf; |
| /* convert DDR frequency from units of 266.6MHz to bandwidth */ |
| min_ring_freq = mult_frac(min_ring_freq, 8, 3); |
| |
| /* |
| * For each potential GPU frequency, load a ring frequency we'd like |
| * to use for memory access. We do this by specifying the IA frequency |
| * the PCU should use as a reference to determine the ring frequency. |
| */ |
| for (gpu_freq = dev_priv->rps.max_freq; gpu_freq >= dev_priv->rps.min_freq; |
| gpu_freq--) { |
| int diff = dev_priv->rps.max_freq - gpu_freq; |
| unsigned int ia_freq = 0, ring_freq = 0; |
| |
| if (INTEL_INFO(dev)->gen >= 8) { |
| /* max(2 * GT, DDR). NB: GT is 50MHz units */ |
| ring_freq = max(min_ring_freq, gpu_freq); |
| } else if (IS_HASWELL(dev)) { |
| ring_freq = mult_frac(gpu_freq, 5, 4); |
| ring_freq = max(min_ring_freq, ring_freq); |
| /* leave ia_freq as the default, chosen by cpufreq */ |
| } else { |
| /* On older processors, there is no separate ring |
| * clock domain, so in order to boost the bandwidth |
| * of the ring, we need to upclock the CPU (ia_freq). |
| * |
| * For GPU frequencies less than 750MHz, |
| * just use the lowest ring freq. |
| */ |
| if (gpu_freq < min_freq) |
| ia_freq = 800; |
| else |
| ia_freq = max_ia_freq - ((diff * scaling_factor) / 2); |
| ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100); |
| } |
| |
| sandybridge_pcode_write(dev_priv, |
| GEN6_PCODE_WRITE_MIN_FREQ_TABLE, |
| ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT | |
| ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT | |
| gpu_freq); |
| } |
| } |
| |
| void gen6_update_ring_freq(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen < 6 || IS_VALLEYVIEW(dev)) |
| return; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| __gen6_update_ring_freq(dev); |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| static int cherryview_rps_max_freq(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| u32 val, rp0; |
| |
| if (dev->pdev->revision >= 0x20) { |
| val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE); |
| |
| switch (INTEL_INFO(dev)->eu_total) { |
| case 8: |
| /* (2 * 4) config */ |
| rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT); |
| break; |
| case 12: |
| /* (2 * 6) config */ |
| rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS6EU_FUSE_SHIFT); |
| break; |
| case 16: |
| /* (2 * 8) config */ |
| default: |
| /* Setting (2 * 8) Min RP0 for any other combination */ |
| rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS8EU_FUSE_SHIFT); |
| break; |
| } |
| rp0 = (rp0 & FB_GFX_FREQ_FUSE_MASK); |
| } else { |
| /* For pre-production hardware */ |
| val = vlv_punit_read(dev_priv, PUNIT_GPU_STATUS_REG); |
| rp0 = (val >> PUNIT_GPU_STATUS_MAX_FREQ_SHIFT) & |
| PUNIT_GPU_STATUS_MAX_FREQ_MASK; |
| } |
| return rp0; |
| } |
| |
| static int cherryview_rps_rpe_freq(struct drm_i915_private *dev_priv) |
| { |
| u32 val, rpe; |
| |
| val = vlv_punit_read(dev_priv, PUNIT_GPU_DUTYCYCLE_REG); |
| rpe = (val >> PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT) & PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK; |
| |
| return rpe; |
| } |
| |
| static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| u32 val, rp1; |
| |
| if (dev->pdev->revision >= 0x20) { |
| val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE); |
| rp1 = (val & FB_GFX_FREQ_FUSE_MASK); |
| } else { |
| /* For pre-production hardware */ |
| val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); |
| rp1 = ((val >> PUNIT_GPU_STATUS_MAX_FREQ_SHIFT) & |
| PUNIT_GPU_STATUS_MAX_FREQ_MASK); |
| } |
| return rp1; |
| } |
| |
| static int cherryview_rps_min_freq(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| u32 val, rpn; |
| |
| if (dev->pdev->revision >= 0x20) { |
| val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE); |
| rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) & |
| FB_GFX_FREQ_FUSE_MASK); |
| } else { /* For pre-production hardware */ |
| val = vlv_punit_read(dev_priv, PUNIT_GPU_STATUS_REG); |
| rpn = ((val >> PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT) & |
| PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK); |
| } |
| |
| return rpn; |
| } |
| |
| static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv) |
| { |
| u32 val, rp1; |
| |
| val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE); |
| |
| rp1 = (val & FB_GFX_FGUARANTEED_FREQ_FUSE_MASK) >> FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT; |
| |
| return rp1; |
| } |
| |
| static int valleyview_rps_max_freq(struct drm_i915_private *dev_priv) |
| { |
| u32 val, rp0; |
| |
| val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE); |
| |
| rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT; |
| /* Clamp to max */ |
| rp0 = min_t(u32, rp0, 0xea); |
| |
| return rp0; |
| } |
| |
| static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv) |
| { |
| u32 val, rpe; |
| |
| val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO); |
| rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT; |
| val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI); |
| rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5; |
| |
| return rpe; |
| } |
| |
| static int valleyview_rps_min_freq(struct drm_i915_private *dev_priv) |
| { |
| return vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff; |
| } |
| |
| /* Check that the pctx buffer wasn't move under us. */ |
| static void valleyview_check_pctx(struct drm_i915_private *dev_priv) |
| { |
| unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095; |
| |
| WARN_ON(pctx_addr != dev_priv->mm.stolen_base + |
| dev_priv->vlv_pctx->stolen->start); |
| } |
| |
| |
| /* Check that the pcbr address is not empty. */ |
| static void cherryview_check_pctx(struct drm_i915_private *dev_priv) |
| { |
| unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095; |
| |
| WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0); |
| } |
| |
| static void cherryview_setup_pctx(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long pctx_paddr, paddr; |
| struct i915_gtt *gtt = &dev_priv->gtt; |
| u32 pcbr; |
| int pctx_size = 32*1024; |
| |
| WARN_ON(!mutex_is_locked(&dev->struct_mutex)); |
| |
| pcbr = I915_READ(VLV_PCBR); |
| if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) { |
| DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); |
| paddr = (dev_priv->mm.stolen_base + |
| (gtt->stolen_size - pctx_size)); |
| |
| pctx_paddr = (paddr & (~4095)); |
| I915_WRITE(VLV_PCBR, pctx_paddr); |
| } |
| |
| DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR)); |
| } |
| |
| static void valleyview_setup_pctx(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *pctx; |
| unsigned long pctx_paddr; |
| u32 pcbr; |
| int pctx_size = 24*1024; |
| |
| WARN_ON(!mutex_is_locked(&dev->struct_mutex)); |
| |
| pcbr = I915_READ(VLV_PCBR); |
| if (pcbr) { |
| /* BIOS set it up already, grab the pre-alloc'd space */ |
| int pcbr_offset; |
| |
| pcbr_offset = (pcbr & (~4095)) - dev_priv->mm.stolen_base; |
| pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv->dev, |
| pcbr_offset, |
| I915_GTT_OFFSET_NONE, |
| pctx_size); |
| goto out; |
| } |
| |
| DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); |
| |
| /* |
| * From the Gunit register HAS: |
| * The Gfx driver is expected to program this register and ensure |
| * proper allocation within Gfx stolen memory. For example, this |
| * register should be programmed such than the PCBR range does not |
| * overlap with other ranges, such as the frame buffer, protected |
| * memory, or any other relevant ranges. |
| */ |
| pctx = i915_gem_object_create_stolen(dev, pctx_size); |
| if (!pctx) { |
| DRM_DEBUG("not enough stolen space for PCTX, disabling\n"); |
| return; |
| } |
| |
| pctx_paddr = dev_priv->mm.stolen_base + pctx->stolen->start; |
| I915_WRITE(VLV_PCBR, pctx_paddr); |
| |
| out: |
| DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR)); |
| dev_priv->vlv_pctx = pctx; |
| } |
| |
| static void valleyview_cleanup_pctx(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (WARN_ON(!dev_priv->vlv_pctx)) |
| return; |
| |
| drm_gem_object_unreference(&dev_priv->vlv_pctx->base); |
| dev_priv->vlv_pctx = NULL; |
| } |
| |
| static void valleyview_init_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 val; |
| |
| valleyview_setup_pctx(dev); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); |
| switch ((val >> 6) & 3) { |
| case 0: |
| case 1: |
| dev_priv->mem_freq = 800; |
| break; |
| case 2: |
| dev_priv->mem_freq = 1066; |
| break; |
| case 3: |
| dev_priv->mem_freq = 1333; |
| break; |
| } |
| DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq); |
| |
| dev_priv->rps.max_freq = valleyview_rps_max_freq(dev_priv); |
| dev_priv->rps.rp0_freq = dev_priv->rps.max_freq; |
| DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.max_freq), |
| dev_priv->rps.max_freq); |
| |
| dev_priv->rps.efficient_freq = valleyview_rps_rpe_freq(dev_priv); |
| DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), |
| dev_priv->rps.efficient_freq); |
| |
| dev_priv->rps.rp1_freq = valleyview_rps_guar_freq(dev_priv); |
| DRM_DEBUG_DRIVER("RP1(Guar Freq) GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq), |
| dev_priv->rps.rp1_freq); |
| |
| dev_priv->rps.min_freq = valleyview_rps_min_freq(dev_priv); |
| DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.min_freq), |
| dev_priv->rps.min_freq); |
| |
| /* Preserve min/max settings in case of re-init */ |
| if (dev_priv->rps.max_freq_softlimit == 0) |
| dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; |
| |
| if (dev_priv->rps.min_freq_softlimit == 0) |
| dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| static void cherryview_init_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 val; |
| |
| cherryview_setup_pctx(dev); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| mutex_lock(&dev_priv->dpio_lock); |
| val = vlv_cck_read(dev_priv, CCK_FUSE_REG); |
| mutex_unlock(&dev_priv->dpio_lock); |
| |
| switch ((val >> 2) & 0x7) { |
| case 0: |
| case 1: |
| dev_priv->rps.cz_freq = 200; |
| dev_priv->mem_freq = 1600; |
| break; |
| case 2: |
| dev_priv->rps.cz_freq = 267; |
| dev_priv->mem_freq = 1600; |
| break; |
| case 3: |
| dev_priv->rps.cz_freq = 333; |
| dev_priv->mem_freq = 2000; |
| break; |
| case 4: |
| dev_priv->rps.cz_freq = 320; |
| dev_priv->mem_freq = 1600; |
| break; |
| case 5: |
| dev_priv->rps.cz_freq = 400; |
| dev_priv->mem_freq = 1600; |
| break; |
| } |
| DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq); |
| |
| dev_priv->rps.max_freq = cherryview_rps_max_freq(dev_priv); |
| dev_priv->rps.rp0_freq = dev_priv->rps.max_freq; |
| DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.max_freq), |
| dev_priv->rps.max_freq); |
| |
| dev_priv->rps.efficient_freq = cherryview_rps_rpe_freq(dev_priv); |
| DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), |
| dev_priv->rps.efficient_freq); |
| |
| dev_priv->rps.rp1_freq = cherryview_rps_guar_freq(dev_priv); |
| DRM_DEBUG_DRIVER("RP1(Guar) GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq), |
| dev_priv->rps.rp1_freq); |
| |
| dev_priv->rps.min_freq = cherryview_rps_min_freq(dev_priv); |
| DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.min_freq), |
| dev_priv->rps.min_freq); |
| |
| WARN_ONCE((dev_priv->rps.max_freq | |
| dev_priv->rps.efficient_freq | |
| dev_priv->rps.rp1_freq | |
| dev_priv->rps.min_freq) & 1, |
| "Odd GPU freq values\n"); |
| |
| /* Preserve min/max settings in case of re-init */ |
| if (dev_priv->rps.max_freq_softlimit == 0) |
| dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; |
| |
| if (dev_priv->rps.min_freq_softlimit == 0) |
| dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| |
| static void valleyview_cleanup_gt_powersave(struct drm_device *dev) |
| { |
| valleyview_cleanup_pctx(dev); |
| } |
| |
| static void cherryview_enable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring; |
| u32 gtfifodbg, val, rc6_mode = 0, pcbr; |
| int i; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| gtfifodbg = I915_READ(GTFIFODBG); |
| if (gtfifodbg) { |
| DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n", |
| gtfifodbg); |
| I915_WRITE(GTFIFODBG, gtfifodbg); |
| } |
| |
| cherryview_check_pctx(dev_priv); |
| |
| /* 1a & 1b: Get forcewake during program sequence. Although the driver |
| * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| /* Disable RC states. */ |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| /* 2a: Program RC6 thresholds.*/ |
| I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); |
| I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ |
| I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ |
| |
| for_each_ring(ring, dev_priv, i) |
| I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); |
| I915_WRITE(GEN6_RC_SLEEP, 0); |
| |
| /* TO threshold set to 1750 us ( 0x557 * 1.28 us) */ |
| I915_WRITE(GEN6_RC6_THRESHOLD, 0x557); |
| |
| /* allows RC6 residency counter to work */ |
| I915_WRITE(VLV_COUNTER_CONTROL, |
| _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH | |
| VLV_MEDIA_RC6_COUNT_EN | |
| VLV_RENDER_RC6_COUNT_EN)); |
| |
| /* For now we assume BIOS is allocating and populating the PCBR */ |
| pcbr = I915_READ(VLV_PCBR); |
| |
| /* 3: Enable RC6 */ |
| if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) && |
| (pcbr >> VLV_PCBR_ADDR_SHIFT)) |
| rc6_mode = GEN7_RC_CTL_TO_MODE; |
| |
| I915_WRITE(GEN6_RC_CONTROL, rc6_mode); |
| |
| /* 4 Program defaults and thresholds for RPS*/ |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); |
| I915_WRITE(GEN6_RP_UP_EI, 66000); |
| I915_WRITE(GEN6_RP_DOWN_EI, 350000); |
| |
| I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); |
| |
| /* 5: Enable RPS */ |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_AVG); |
| |
| val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); |
| |
| /* RPS code assumes GPLL is used */ |
| WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n"); |
| |
| DRM_DEBUG_DRIVER("GPLL enabled? %s\n", val & GPLLENABLE ? "yes" : "no"); |
| DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val); |
| |
| dev_priv->rps.cur_freq = (val >> 8) & 0xff; |
| DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq), |
| dev_priv->rps.cur_freq); |
| |
| DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), |
| dev_priv->rps.efficient_freq); |
| |
| valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static void valleyview_enable_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring; |
| u32 gtfifodbg, val, rc6_mode = 0; |
| int i; |
| |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| valleyview_check_pctx(dev_priv); |
| |
| if ((gtfifodbg = I915_READ(GTFIFODBG))) { |
| DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n", |
| gtfifodbg); |
| I915_WRITE(GTFIFODBG, gtfifodbg); |
| } |
| |
| /* If VLV, Forcewake all wells, else re-direct to regular path */ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| /* Disable RC states. */ |
| I915_WRITE(GEN6_RC_CONTROL, 0); |
| |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000); |
| I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); |
| I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); |
| I915_WRITE(GEN6_RP_UP_EI, 66000); |
| I915_WRITE(GEN6_RP_DOWN_EI, 350000); |
| |
| I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); |
| |
| I915_WRITE(GEN6_RP_CONTROL, |
| GEN6_RP_MEDIA_TURBO | |
| GEN6_RP_MEDIA_HW_NORMAL_MODE | |
| GEN6_RP_MEDIA_IS_GFX | |
| GEN6_RP_ENABLE | |
| GEN6_RP_UP_BUSY_AVG | |
| GEN6_RP_DOWN_IDLE_CONT); |
| |
| I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000); |
| I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); |
| I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); |
| |
| for_each_ring(ring, dev_priv, i) |
| I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); |
| |
| I915_WRITE(GEN6_RC6_THRESHOLD, 0x557); |
| |
| /* allows RC6 residency counter to work */ |
| I915_WRITE(VLV_COUNTER_CONTROL, |
| _MASKED_BIT_ENABLE(VLV_MEDIA_RC0_COUNT_EN | |
| VLV_RENDER_RC0_COUNT_EN | |
| VLV_MEDIA_RC6_COUNT_EN | |
| VLV_RENDER_RC6_COUNT_EN)); |
| |
| if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE) |
| rc6_mode = GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL; |
| |
| intel_print_rc6_info(dev, rc6_mode); |
| |
| I915_WRITE(GEN6_RC_CONTROL, rc6_mode); |
| |
| val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); |
| |
| /* RPS code assumes GPLL is used */ |
| WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n"); |
| |
| DRM_DEBUG_DRIVER("GPLL enabled? %s\n", val & GPLLENABLE ? "yes" : "no"); |
| DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val); |
| |
| dev_priv->rps.cur_freq = (val >> 8) & 0xff; |
| DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq), |
| dev_priv->rps.cur_freq); |
| |
| DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n", |
| intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), |
| dev_priv->rps.efficient_freq); |
| |
| valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq); |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| } |
| |
| static unsigned long intel_pxfreq(u32 vidfreq) |
| { |
| unsigned long freq; |
| int div = (vidfreq & 0x3f0000) >> 16; |
| int post = (vidfreq & 0x3000) >> 12; |
| int pre = (vidfreq & 0x7); |
| |
| if (!pre) |
| return 0; |
| |
| freq = ((div * 133333) / ((1<<post) * pre)); |
| |
| return freq; |
| } |
| |
| static const struct cparams { |
| u16 i; |
| u16 t; |
| u16 m; |
| u16 c; |
| } cparams[] = { |
| { 1, 1333, 301, 28664 }, |
| { 1, 1066, 294, 24460 }, |
| { 1, 800, 294, 25192 }, |
| { 0, 1333, 276, 27605 }, |
| { 0, 1066, 276, 27605 }, |
| { 0, 800, 231, 23784 }, |
| }; |
| |
| static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv) |
| { |
| u64 total_count, diff, ret; |
| u32 count1, count2, count3, m = 0, c = 0; |
| unsigned long now = jiffies_to_msecs(jiffies), diff1; |
| int i; |
| |
| assert_spin_locked(&mchdev_lock); |
| |
| diff1 = now - dev_priv->ips.last_time1; |
| |
| /* Prevent division-by-zero if we are asking too fast. |
| * Also, we don't get interesting results if we are polling |
| * faster than once in 10ms, so just return the saved value |
| * in such cases. |
| */ |
| if (diff1 <= 10) |
| return dev_priv->ips.chipset_power; |
| |
| count1 = I915_READ(DMIEC); |
| count2 = I915_READ(DDREC); |
| count3 = I915_READ(CSIEC); |
| |
| total_count = count1 + count2 + count3; |
| |
| /* FIXME: handle per-counter overflow */ |
| if (total_count < dev_priv->ips.last_count1) { |
| diff = ~0UL - dev_priv->ips.last_count1; |
| diff += total_count; |
| } else { |
| diff = total_count - dev_priv->ips.last_count1; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(cparams); i++) { |
| if (cparams[i].i == dev_priv->ips.c_m && |
| cparams[i].t == dev_priv->ips.r_t) { |
| m = cparams[i].m; |
| c = cparams[i].c; |
| break; |
| } |
| } |
| |
| diff = div_u64(diff, diff1); |
| ret = ((m * diff) + c); |
| ret = div_u64(ret, 10); |
| |
| dev_priv->ips.last_count1 = total_count; |
| dev_priv->ips.last_time1 = now; |
| |
| dev_priv->ips.chipset_power = ret; |
| |
| return ret; |
| } |
| |
| unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| unsigned long val; |
| |
| if (INTEL_INFO(dev)->gen != 5) |
| return 0; |
| |
| spin_lock_irq(&mchdev_lock); |
| |
| val = __i915_chipset_val(dev_priv); |
| |
| spin_unlock_irq(&mchdev_lock); |
| |
| return val; |
| } |
| |
| unsigned long i915_mch_val(struct drm_i915_private *dev_priv) |
| { |
| unsigned long m, x, b; |
| u32 tsfs; |
| |
| tsfs = I915_READ(TSFS); |
| |
| m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT); |
| x = I915_READ8(TR1); |
| |
| b = tsfs & TSFS_INTR_MASK; |
| |
| return ((m * x) / 127) - b; |
| } |
| |
| static int _pxvid_to_vd(u8 pxvid) |
| { |
| if (pxvid == 0) |
| return 0; |
| |
| if (pxvid >= 8 && pxvid < 31) |
| pxvid = 31; |
| |
| return (pxvid + 2) * 125; |
| } |
| |
| static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| const int vd = _pxvid_to_vd(pxvid); |
| const int vm = vd - 1125; |
| |
| if (INTEL_INFO(dev)->is_mobile) |
| return vm > 0 ? vm : 0; |
| |
| return vd; |
| } |
| |
| static void __i915_update_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| u64 now, diff, diffms; |
| u32 count; |
| |
| assert_spin_locked(&mchdev_lock); |
| |
| now = ktime_get_raw_ns(); |
| diffms = now - dev_priv->ips.last_time2; |
| do_div(diffms, NSEC_PER_MSEC); |
| |
| /* Don't divide by 0 */ |
| if (!diffms) |
| return; |
| |
| count = I915_READ(GFXEC); |
| |
| if (count < dev_priv->ips.last_count2) { |
| diff = ~0UL - dev_priv->ips.last_count2; |
| diff += count; |
| } else { |
| diff = count - dev_priv->ips.last_count2; |
| } |
| |
| dev_priv->ips.last_count2 = count; |
| dev_priv->ips.last_time2 = now; |
| |
| /* More magic constants... */ |
| diff = diff * 1181; |
| diff = div_u64(diff, diffms * 10); |
| dev_priv->ips.gfx_power = diff; |
| } |
| |
| void i915_update_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| if (INTEL_INFO(dev)->gen != 5) |
| return; |
| |
| spin_lock_irq(&mchdev_lock); |
| |
| __i915_update_gfx_val(dev_priv); |
| |
| spin_unlock_irq(&mchdev_lock); |
| } |
| |
| static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| unsigned long t, corr, state1, corr2, state2; |
| u32 pxvid, ext_v; |
| |
| assert_spin_locked(&mchdev_lock); |
| |
| pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->rps.cur_freq * 4)); |
| pxvid = (pxvid >> 24) & 0x7f; |
| ext_v = pvid_to_extvid(dev_priv, pxvid); |
| |
| state1 = ext_v; |
| |
| t = i915_mch_val(dev_priv); |
| |
| /* Revel in the empirically derived constants */ |
| |
| /* Correction factor in 1/100000 units */ |
| if (t > 80) |
| corr = ((t * 2349) + 135940); |
| else if (t >= 50) |
| corr = ((t * 964) + 29317); |
| else /* < 50 */ |
| corr = ((t * 301) + 1004); |
| |
| corr = corr * ((150142 * state1) / 10000 - 78642); |
| corr /= 100000; |
| corr2 = (corr * dev_priv->ips.corr); |
| |
| state2 = (corr2 * state1) / 10000; |
| state2 /= 100; /* convert to mW */ |
| |
| __i915_update_gfx_val(dev_priv); |
| |
| return dev_priv->ips.gfx_power + state2; |
| } |
| |
| unsigned long i915_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| unsigned long val; |
| |
| if (INTEL_INFO(dev)->gen != 5) |
| return 0; |
| |
| spin_lock_irq(&mchdev_lock); |
| |
| val = __i915_gfx_val(dev_priv); |
| |
| spin_unlock_irq(&mchdev_lock); |
| |
| return val; |
| } |
| |
| /** |
| * i915_read_mch_val - return value for IPS use |
| * |
| * Calculate and return a value for the IPS driver to use when deciding whether |
| * we have thermal and power headroom to increase CPU or GPU power budget. |
| */ |
| unsigned long i915_read_mch_val(void) |
| { |
| struct drm_i915_private *dev_priv; |
| unsigned long chipset_val, graphics_val, ret = 0; |
| |
| spin_lock_irq(&mchdev_lock); |
| if (!i915_mch_dev) |
| goto out_unlock; |
| dev_priv = i915_mch_dev; |
| |
| chipset_val = __i915_chipset_val(dev_priv); |
| graphics_val = __i915_gfx_val(dev_priv); |
| |
| ret = chipset_val + graphics_val; |
| |
| out_unlock: |
| spin_unlock_irq(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_read_mch_val); |
| |
| /** |
| * i915_gpu_raise - raise GPU frequency limit |
| * |
| * Raise the limit; IPS indicates we have thermal headroom. |
| */ |
| bool i915_gpu_raise(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock_irq(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| if (dev_priv->ips.max_delay > dev_priv->ips.fmax) |
| dev_priv->ips.max_delay--; |
| |
| out_unlock: |
| spin_unlock_irq(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_raise); |
| |
| /** |
| * i915_gpu_lower - lower GPU frequency limit |
| * |
| * IPS indicates we're close to a thermal limit, so throttle back the GPU |
| * frequency maximum. |
| */ |
| bool i915_gpu_lower(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock_irq(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| if (dev_priv->ips.max_delay < dev_priv->ips.min_delay) |
| dev_priv->ips.max_delay++; |
| |
| out_unlock: |
| spin_unlock_irq(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_lower); |
| |
| /** |
| * i915_gpu_busy - indicate GPU business to IPS |
| * |
| * Tell the IPS driver whether or not the GPU is busy. |
| */ |
| bool i915_gpu_busy(void) |
| { |
| struct drm_i915_private *dev_priv; |
| struct intel_engine_cs *ring; |
| bool ret = false; |
| int i; |
| |
| spin_lock_irq(&mchdev_lock); |
| if (!i915_mch_dev) |
| goto out_unlock; |
| dev_priv = i915_mch_dev; |
| |
| for_each_ring(ring, dev_priv, i) |
| ret |= !list_empty(&ring->request_list); |
| |
| out_unlock: |
| spin_unlock_irq(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_busy); |
| |
| /** |
| * i915_gpu_turbo_disable - disable graphics turbo |
| * |
| * Disable graphics turbo by resetting the max frequency and setting the |
| * current frequency to the default. |
| */ |
| bool i915_gpu_turbo_disable(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock_irq(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| dev_priv->ips.max_delay = dev_priv->ips.fstart; |
| |
| if (!ironlake_set_drps(dev_priv->dev, dev_priv->ips.fstart)) |
| ret = false; |
| |
| out_unlock: |
| spin_unlock_irq(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable); |
| |
| /** |
| * Tells the intel_ips driver that the i915 driver is now loaded, if |
| * IPS got loaded first. |
| * |
| * This awkward dance is so that neither module has to depend on the |
| * other in order for IPS to do the appropriate communication of |
| * GPU turbo limits to i915. |
| */ |
| static void |
| ips_ping_for_i915_load(void) |
| { |
| void (*link)(void); |
| |
| link = symbol_get(ips_link_to_i915_driver); |
| if (link) { |
| link(); |
| symbol_put(ips_link_to_i915_driver); |
| } |
| } |
| |
| void intel_gpu_ips_init(struct drm_i915_private *dev_priv) |
| { |
| /* We only register the i915 ips part with intel-ips once everything is |
| * set up, to avoid intel-ips sneaking in and reading bogus values. */ |
| spin_lock_irq(&mchdev_lock); |
| i915_mch_dev = dev_priv; |
| spin_unlock_irq(&mchdev_lock); |
| |
| ips_ping_for_i915_load(); |
| } |
| |
| void intel_gpu_ips_teardown(void) |
| { |
| spin_lock_irq(&mchdev_lock); |
| i915_mch_dev = NULL; |
| spin_unlock_irq(&mchdev_lock); |
| } |
| |
| static void intel_init_emon(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 lcfuse; |
| u8 pxw[16]; |
| int i; |
| |
| /* Disable to program */ |
| I915_WRITE(ECR, 0); |
| POSTING_READ(ECR); |
| |
| /* Program energy weights for various events */ |
| I915_WRITE(SDEW, 0x15040d00); |
| I915_WRITE(CSIEW0, 0x007f0000); |
| I915_WRITE(CSIEW1, 0x1e220004); |
| I915_WRITE(CSIEW2, 0x04000004); |
| |
| for (i = 0; i < 5; i++) |
| I915_WRITE(PEW + (i * 4), 0); |
| for (i = 0; i < 3; i++) |
| I915_WRITE(DEW + (i * 4), 0); |
| |
| /* Program P-state weights to account for frequency power adjustment */ |
| for (i = 0; i < 16; i++) { |
| u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4)); |
| unsigned long freq = intel_pxfreq(pxvidfreq); |
| unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >> |
| PXVFREQ_PX_SHIFT; |
| unsigned long val; |
| |
| val = vid * vid; |
| val *= (freq / 1000); |
| val *= 255; |
| val /= (127*127*900); |
| if (val > 0xff) |
| DRM_ERROR("bad pxval: %ld\n", val); |
| pxw[i] = val; |
| } |
| /* Render standby states get 0 weight */ |
| pxw[14] = 0; |
| pxw[15] = 0; |
| |
| for (i = 0; i < 4; i++) { |
| u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) | |
| (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]); |
| I915_WRITE(PXW + (i * 4), val); |
| } |
| |
| /* Adjust magic regs to magic values (more experimental results) */ |
| I915_WRITE(OGW0, 0); |
| I915_WRITE(OGW1, 0); |
| I915_WRITE(EG0, 0x00007f00); |
| I915_WRITE(EG1, 0x0000000e); |
| I915_WRITE(EG2, 0x000e0000); |
| I915_WRITE(EG3, 0x68000300); |
| I915_WRITE(EG4, 0x42000000); |
| I915_WRITE(EG5, 0x00140031); |
| I915_WRITE(EG6, 0); |
| I915_WRITE(EG7, 0); |
| |
| for (i = 0; i < 8; i++) |
| I915_WRITE(PXWL + (i * 4), 0); |
| |
| /* Enable PMON + select events */ |
| I915_WRITE(ECR, 0x80000019); |
| |
| lcfuse = I915_READ(LCFUSE02); |
| |
| dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK); |
| } |
| |
| void intel_init_gt_powersave(struct drm_device *dev) |
| { |
| i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6); |
| |
| if (IS_CHERRYVIEW(dev)) |
| cherryview_init_gt_powersave(dev); |
| else if (IS_VALLEYVIEW(dev)) |
| valleyview_init_gt_powersave(dev); |
| } |
| |
| void intel_cleanup_gt_powersave(struct drm_device *dev) |
| { |
| if (IS_CHERRYVIEW(dev)) |
| return; |
| else if (IS_VALLEYVIEW(dev)) |
| valleyview_cleanup_gt_powersave(dev); |
| } |
| |
| static void gen6_suspend_rps(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| flush_delayed_work(&dev_priv->rps.delayed_resume_work); |
| |
| /* |
| * TODO: disable RPS interrupts on GEN9+ too once RPS support |
| * is added for it. |
| */ |
| if (INTEL_INFO(dev)->gen < 9) |
| gen6_disable_rps_interrupts(dev); |
| } |
| |
| /** |
| * intel_suspend_gt_powersave - suspend PM work and helper threads |
| * @dev: drm device |
| * |
| * We don't want to disable RC6 or other features here, we just want |
| * to make sure any work we've queued has finished and won't bother |
| * us while we're suspended. |
| */ |
| void intel_suspend_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen < 6) |
| return; |
| |
| gen6_suspend_rps(dev); |
| |
| /* Force GPU to min freq during suspend */ |
| gen6_rps_idle(dev_priv); |
| } |
| |
| void intel_disable_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (IS_IRONLAKE_M(dev)) { |
| ironlake_disable_drps(dev); |
| } else if (INTEL_INFO(dev)->gen >= 6) { |
| intel_suspend_gt_powersave(dev); |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| if (INTEL_INFO(dev)->gen >= 9) |
| gen9_disable_rps(dev); |
| else if (IS_CHERRYVIEW(dev)) |
| cherryview_disable_rps(dev); |
| else if (IS_VALLEYVIEW(dev)) |
| valleyview_disable_rps(dev); |
| else |
| gen6_disable_rps(dev); |
| |
| dev_priv->rps.enabled = false; |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| } |
| } |
| |
| static void intel_gen6_powersave_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, |
| rps.delayed_resume_work.work); |
| struct drm_device *dev = dev_priv->dev; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| /* |
| * TODO: reset/enable RPS interrupts on GEN9+ too, once RPS support is |
| * added for it. |
| */ |
| if (INTEL_INFO(dev)->gen < 9) |
| gen6_reset_rps_interrupts(dev); |
| |
| if (IS_CHERRYVIEW(dev)) { |
| cherryview_enable_rps(dev); |
| } else if (IS_VALLEYVIEW(dev)) { |
| valleyview_enable_rps(dev); |
| } else if (INTEL_INFO(dev)->gen >= 9) { |
| gen9_enable_rc6(dev); |
| gen9_enable_rps(dev); |
| __gen6_update_ring_freq(dev); |
| } else if (IS_BROADWELL(dev)) { |
| gen8_enable_rps(dev); |
| __gen6_update_ring_freq(dev); |
| } else { |
| gen6_enable_rps(dev); |
| __gen6_update_ring_freq(dev); |
| } |
| dev_priv->rps.enabled = true; |
| |
| if (INTEL_INFO(dev)->gen < 9) |
| gen6_enable_rps_interrupts(dev); |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| |
| intel_runtime_pm_put(dev_priv); |
| } |
| |
| void intel_enable_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* Powersaving is controlled by the host when inside a VM */ |
| if (intel_vgpu_active(dev)) |
| return; |
| |
| if (IS_IRONLAKE_M(dev)) { |
| mutex_lock(&dev->struct_mutex); |
| ironlake_enable_drps(dev); |
| intel_init_emon(dev); |
| mutex_unlock(&dev->struct_mutex); |
| } else if (INTEL_INFO(dev)->gen >= 6) { |
| /* |
| * PCU communication is slow and this doesn't need to be |
| * done at any specific time, so do this out of our fast path |
| * to make resume and init faster. |
| * |
| * We depend on the HW RC6 power context save/restore |
| * mechanism when entering D3 through runtime PM suspend. So |
| * disable RPM until RPS/RC6 is properly setup. We can only |
| * get here via the driver load/system resume/runtime resume |
| * paths, so the _noresume version is enough (and in case of |
| * runtime resume it's necessary). |
| */ |
| if (schedule_delayed_work(&dev_priv->rps.delayed_resume_work, |
| round_jiffies_up_relative(HZ))) |
| intel_runtime_pm_get_noresume(dev_priv); |
| } |
| } |
| |
| void intel_reset_gt_powersave(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen < 6) |
| return; |
| |
| gen6_suspend_rps(dev); |
| dev_priv->rps.enabled = false; |
| } |
| |
| static void ibx_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* |
| * On Ibex Peak and Cougar Point, we need to disable clock |
| * gating for the panel power sequencer or it will fail to |
| * start up when no ports are active. |
| */ |
| I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); |
| } |
| |
| static void g4x_disable_trickle_feed(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(DSPCNTR(pipe), |
| I915_READ(DSPCNTR(pipe)) | |
| DISPPLANE_TRICKLE_FEED_DISABLE); |
| intel_flush_primary_plane(dev_priv, pipe); |
| } |
| } |
| |
| static void ilk_init_lp_watermarks(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN); |
| I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN); |
| I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN); |
| |
| /* |
| * Don't touch WM1S_LP_EN here. |
| * Doing so could cause underruns. |
| */ |
| } |
| |
| static void ironlake_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE; |
| |
| /* |
| * Required for FBC |
| * WaFbcDisableDpfcClockGating:ilk |
| */ |
| dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE | |
| ILK_DPFCUNIT_CLOCK_GATE_DISABLE | |
| ILK_DPFDUNIT_CLOCK_GATE_ENABLE; |
| |
| I915_WRITE(PCH_3DCGDIS0, |
| MARIUNIT_CLOCK_GATE_DISABLE | |
| SVSMUNIT_CLOCK_GATE_DISABLE); |
| I915_WRITE(PCH_3DCGDIS1, |
| VFMUNIT_CLOCK_GATE_DISABLE); |
| |
| /* |
| * According to the spec the following bits should be set in |
| * order to enable memory self-refresh |
| * The bit 22/21 of 0x42004 |
| * The bit 5 of 0x42020 |
| * The bit 15 of 0x45000 |
| */ |
| I915_WRITE(ILK_DISPLAY_CHICKEN2, |
| (I915_READ(ILK_DISPLAY_CHICKEN2) | |
| ILK_DPARB_GATE | ILK_VSDPFD_FULL)); |
| dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE; |
| I915_WRITE(DISP_ARB_CTL, |
| (I915_READ(DISP_ARB_CTL) | |
| DISP_FBC_WM_DIS)); |
| |
| ilk_init_lp_watermarks(dev); |
| |
| /* |
| * Based on the document from hardware guys the following bits |
| * should be set unconditionally in order to enable FBC. |
| * The bit 22 of 0x42000 |
| * The bit 22 of 0x42004 |
| * The bit 7,8,9 of 0x42020. |
| */ |
| if (IS_IRONLAKE_M(dev)) { |
| /* WaFbcAsynchFlipDisableFbcQueue:ilk */ |
| I915_WRITE(ILK_DISPLAY_CHICKEN1, |
| I915_READ(ILK_DISPLAY_CHICKEN1) | |
| ILK_FBCQ_DIS); |
| I915_WRITE(ILK_DISPLAY_CHICKEN2, |
| I915_READ(ILK_DISPLAY_CHICKEN2) | |
| ILK_DPARB_GATE); |
| } |
| |
| I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate); |
| |
| I915_WRITE(ILK_DISPLAY_CHICKEN2, |
| I915_READ(ILK_DISPLAY_CHICKEN2) | |
| ILK_ELPIN_409_SELECT); |
| I915_WRITE(_3D_CHICKEN2, |
| _3D_CHICKEN2_WM_READ_PIPELINED << 16 | |
| _3D_CHICKEN2_WM_READ_PIPELINED); |
| |
| /* WaDisableRenderCachePipelinedFlush:ilk */ |
| I915_WRITE(CACHE_MODE_0, |
| _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:ilk */ |
| I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| g4x_disable_trickle_feed(dev); |
| |
| ibx_init_clock_gating(dev); |
| } |
| |
| static void cpt_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| uint32_t val; |
| |
| /* |
| * On Ibex Peak and Cougar Point, we need to disable clock |
| * gating for the panel power sequencer or it will fail to |
| * start up when no ports are active. |
| */ |
| I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE | |
| PCH_DPLUNIT_CLOCK_GATE_DISABLE | |
| PCH_CPUNIT_CLOCK_GATE_DISABLE); |
| I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) | |
| DPLS_EDP_PPS_FIX_DIS); |
| /* The below fixes the weird display corruption, a few pixels shifted |
| * downward, on (only) LVDS of some HP laptops with IVY. |
| */ |
| for_each_pipe(dev_priv, pipe) { |
| val = I915_READ(TRANS_CHICKEN2(pipe)); |
| val |= TRANS_CHICKEN2_TIMING_OVERRIDE; |
| val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED; |
| if (dev_priv->vbt.fdi_rx_polarity_inverted) |
| val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED; |
| val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK; |
| val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER; |
| val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH; |
| I915_WRITE(TRANS_CHICKEN2(pipe), val); |
| } |
| /* WADP0ClockGatingDisable */ |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(TRANS_CHICKEN1(pipe), |
| TRANS_CHICKEN1_DP0UNIT_GC_DISABLE); |
| } |
| } |
| |
| static void gen6_check_mch_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t tmp; |
| |
| tmp = I915_READ(MCH_SSKPD); |
| if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL) |
| DRM_DEBUG_KMS("Wrong MCH_SSKPD value: 0x%08x This can cause underruns.\n", |
| tmp); |
| } |
| |
| static void gen6_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE; |
| |
| I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate); |
| |
| I915_WRITE(ILK_DISPLAY_CHICKEN2, |
| I915_READ(ILK_DISPLAY_CHICKEN2) | |
| ILK_ELPIN_409_SELECT); |
| |
| /* WaDisableHiZPlanesWhenMSAAEnabled:snb */ |
| I915_WRITE(_3D_CHICKEN, |
| _MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:snb */ |
| I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| /* |
| * BSpec recoomends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| I915_WRITE(GEN6_GT_MODE, |
| _MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4)); |
| |
| ilk_init_lp_watermarks(dev); |
| |
| I915_WRITE(CACHE_MODE_0, |
| _MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB)); |
| |
| I915_WRITE(GEN6_UCGCTL1, |
| I915_READ(GEN6_UCGCTL1) | |
| GEN6_BLBUNIT_CLOCK_GATE_DISABLE | |
| GEN6_CSUNIT_CLOCK_GATE_DISABLE); |
| |
| /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock |
| * gating disable must be set. Failure to set it results in |
| * flickering pixels due to Z write ordering failures after |
| * some amount of runtime in the Mesa "fire" demo, and Unigine |
| * Sanctuary and Tropics, and apparently anything else with |
| * alpha test or pixel discard. |
| * |
| * According to the spec, bit 11 (RCCUNIT) must also be set, |
| * but we didn't debug actual testcases to find it out. |
| * |
| * WaDisableRCCUnitClockGating:snb |
| * WaDisableRCPBUnitClockGating:snb |
| */ |
| I915_WRITE(GEN6_UCGCTL2, |
| GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | |
| GEN6_RCCUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaStripsFansDisableFastClipPerformanceFix:snb */ |
| I915_WRITE(_3D_CHICKEN3, |
| _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL)); |
| |
| /* |
| * Bspec says: |
| * "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and |
| * 3DSTATE_SF number of SF output attributes is more than 16." |
| */ |
| I915_WRITE(_3D_CHICKEN3, |
| _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH)); |
| |
| /* |
| * According to the spec the following bits should be |
| * set in order to enable memory self-refresh and fbc: |
| * The bit21 and bit22 of 0x42000 |
| * The bit21 and bit22 of 0x42004 |
| * The bit5 and bit7 of 0x42020 |
| * The bit14 of 0x70180 |
| * The bit14 of 0x71180 |
| * |
| * WaFbcAsynchFlipDisableFbcQueue:snb |
| */ |
| I915_WRITE(ILK_DISPLAY_CHICKEN1, |
| I915_READ(ILK_DISPLAY_CHICKEN1) | |
| ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); |
| I915_WRITE(ILK_DISPLAY_CHICKEN2, |
| I915_READ(ILK_DISPLAY_CHICKEN2) | |
| ILK_DPARB_GATE | ILK_VSDPFD_FULL); |
| I915_WRITE(ILK_DSPCLK_GATE_D, |
| I915_READ(ILK_DSPCLK_GATE_D) | |
| ILK_DPARBUNIT_CLOCK_GATE_ENABLE | |
| ILK_DPFDUNIT_CLOCK_GATE_ENABLE); |
| |
| g4x_disable_trickle_feed(dev); |
| |
| cpt_init_clock_gating(dev); |
| |
| gen6_check_mch_setup(dev); |
| } |
| |
| static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv) |
| { |
| uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE); |
| |
| /* |
| * WaVSThreadDispatchOverride:ivb,vlv |
| * |
| * This actually overrides the dispatch |
| * mode for all thread types. |
| */ |
| reg &= ~GEN7_FF_SCHED_MASK; |
| reg |= GEN7_FF_TS_SCHED_HW; |
| reg |= GEN7_FF_VS_SCHED_HW; |
| reg |= GEN7_FF_DS_SCHED_HW; |
| |
| I915_WRITE(GEN7_FF_THREAD_MODE, reg); |
| } |
| |
| static void lpt_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* |
| * TODO: this bit should only be enabled when really needed, then |
| * disabled when not needed anymore in order to save power. |
| */ |
| if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) |
| I915_WRITE(SOUTH_DSPCLK_GATE_D, |
| I915_READ(SOUTH_DSPCLK_GATE_D) | |
| PCH_LP_PARTITION_LEVEL_DISABLE); |
| |
| /* WADPOClockGatingDisable:hsw */ |
| I915_WRITE(_TRANSA_CHICKEN1, |
| I915_READ(_TRANSA_CHICKEN1) | |
| TRANS_CHICKEN1_DP0UNIT_GC_DISABLE); |
| } |
| |
| static void lpt_suspend_hw(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { |
| uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D); |
| |
| val &= ~PCH_LP_PARTITION_LEVEL_DISABLE; |
| I915_WRITE(SOUTH_DSPCLK_GATE_D, val); |
| } |
| } |
| |
| static void broadwell_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum pipe pipe; |
| |
| I915_WRITE(WM3_LP_ILK, 0); |
| I915_WRITE(WM2_LP_ILK, 0); |
| I915_WRITE(WM1_LP_ILK, 0); |
| |
| /* WaSwitchSolVfFArbitrationPriority:bdw */ |
| I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL); |
| |
| /* WaPsrDPAMaskVBlankInSRD:bdw */ |
| I915_WRITE(CHICKEN_PAR1_1, |
| I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD); |
| |
| /* WaPsrDPRSUnmaskVBlankInSRD:bdw */ |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(CHICKEN_PIPESL_1(pipe), |
| I915_READ(CHICKEN_PIPESL_1(pipe)) | |
| BDW_DPRS_MASK_VBLANK_SRD); |
| } |
| |
| /* WaVSRefCountFullforceMissDisable:bdw */ |
| /* WaDSRefCountFullforceMissDisable:bdw */ |
| I915_WRITE(GEN7_FF_THREAD_MODE, |
| I915_READ(GEN7_FF_THREAD_MODE) & |
| ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME)); |
| |
| I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL, |
| _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE)); |
| |
| /* WaDisableSDEUnitClockGating:bdw */ |
| I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | |
| GEN8_SDEUNIT_CLOCK_GATE_DISABLE); |
| |
| lpt_init_clock_gating(dev); |
| } |
| |
| static void haswell_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| ilk_init_lp_watermarks(dev); |
| |
| /* L3 caching of data atomics doesn't work -- disable it. */ |
| I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); |
| I915_WRITE(HSW_ROW_CHICKEN3, |
| _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE)); |
| |
| /* This is required by WaCatErrorRejectionIssue:hsw */ |
| I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, |
| I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | |
| GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); |
| |
| /* WaVSRefCountFullforceMissDisable:hsw */ |
| I915_WRITE(GEN7_FF_THREAD_MODE, |
| I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME); |
| |
| /* WaDisable_RenderCache_OperationalFlush:hsw */ |
| I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| /* enable HiZ Raw Stall Optimization */ |
| I915_WRITE(CACHE_MODE_0_GEN7, |
| _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE)); |
| |
| /* WaDisable4x2SubspanOptimization:hsw */ |
| I915_WRITE(CACHE_MODE_1, |
| _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| I915_WRITE(GEN7_GT_MODE, |
| _MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4)); |
| |
| /* WaSampleCChickenBitEnable:hsw */ |
| I915_WRITE(HALF_SLICE_CHICKEN3, |
| _MASKED_BIT_ENABLE(HSW_SAMPLE_C_PERFORMANCE)); |
| |
| /* WaSwitchSolVfFArbitrationPriority:hsw */ |
| I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL); |
| |
| /* WaRsPkgCStateDisplayPMReq:hsw */ |
| I915_WRITE(CHICKEN_PAR1_1, |
| I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES); |
| |
| lpt_init_clock_gating(dev); |
| } |
| |
| static void ivybridge_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t snpcr; |
| |
| ilk_init_lp_watermarks(dev); |
| |
| I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaDisableEarlyCull:ivb */ |
| I915_WRITE(_3D_CHICKEN3, |
| _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL)); |
| |
| /* WaDisableBackToBackFlipFix:ivb */ |
| I915_WRITE(IVB_CHICKEN3, |
| CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | |
| CHICKEN3_DGMG_DONE_FIX_DISABLE); |
| |
| /* WaDisablePSDDualDispatchEnable:ivb */ |
| if (IS_IVB_GT1(dev)) |
| I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, |
| _MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:ivb */ |
| I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */ |
| I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, |
| GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); |
| |
| /* WaApplyL3ControlAndL3ChickenMode:ivb */ |
| I915_WRITE(GEN7_L3CNTLREG1, |
| GEN7_WA_FOR_GEN7_L3_CONTROL); |
| I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, |
| GEN7_WA_L3_CHICKEN_MODE); |
| if (IS_IVB_GT1(dev)) |
| I915_WRITE(GEN7_ROW_CHICKEN2, |
| _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); |
| else { |
| /* must write both registers */ |
| I915_WRITE(GEN7_ROW_CHICKEN2, |
| _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); |
| I915_WRITE(GEN7_ROW_CHICKEN2_GT2, |
| _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); |
| } |
| |
| /* WaForceL3Serialization:ivb */ |
| I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) & |
| ~L3SQ_URB_READ_CAM_MATCH_DISABLE); |
| |
| /* |
| * According to the spec, bit 13 (RCZUNIT) must be set on IVB. |
| * This implements the WaDisableRCZUnitClockGating:ivb workaround. |
| */ |
| I915_WRITE(GEN6_UCGCTL2, |
| GEN6_RCZUNIT_CLOCK_GATE_DISABLE); |
| |
| /* This is required by WaCatErrorRejectionIssue:ivb */ |
| I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, |
| I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | |
| GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); |
| |
| g4x_disable_trickle_feed(dev); |
| |
| gen7_setup_fixed_func_scheduler(dev_priv); |
| |
| if (0) { /* causes HiZ corruption on ivb:gt1 */ |
| /* enable HiZ Raw Stall Optimization */ |
| I915_WRITE(CACHE_MODE_0_GEN7, |
| _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE)); |
| } |
| |
| /* WaDisable4x2SubspanOptimization:ivb */ |
| I915_WRITE(CACHE_MODE_1, |
| _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| I915_WRITE(GEN7_GT_MODE, |
| _MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4)); |
| |
| snpcr = I915_READ(GEN6_MBCUNIT_SNPCR); |
| snpcr &= ~GEN6_MBC_SNPCR_MASK; |
| snpcr |= GEN6_MBC_SNPCR_MED; |
| I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr); |
| |
| if (!HAS_PCH_NOP(dev)) |
| cpt_init_clock_gating(dev); |
| |
| gen6_check_mch_setup(dev); |
| } |
| |
| static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv) |
| { |
| I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE); |
| |
| /* |
| * Disable trickle feed and enable pnd deadline calculation |
| */ |
| I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); |
| I915_WRITE(CBR1_VLV, 0); |
| } |
| |
| static void valleyview_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| vlv_init_display_clock_gating(dev_priv); |
| |
| /* WaDisableEarlyCull:vlv */ |
| I915_WRITE(_3D_CHICKEN3, |
| _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL)); |
| |
| /* WaDisableBackToBackFlipFix:vlv */ |
| I915_WRITE(IVB_CHICKEN3, |
| CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | |
| CHICKEN3_DGMG_DONE_FIX_DISABLE); |
| |
| /* WaPsdDispatchEnable:vlv */ |
| /* WaDisablePSDDualDispatchEnable:vlv */ |
| I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, |
| _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP | |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:vlv */ |
| I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| /* WaForceL3Serialization:vlv */ |
| I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) & |
| ~L3SQ_URB_READ_CAM_MATCH_DISABLE); |
| |
| /* WaDisableDopClockGating:vlv */ |
| I915_WRITE(GEN7_ROW_CHICKEN2, |
| _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); |
| |
| /* This is required by WaCatErrorRejectionIssue:vlv */ |
| I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, |
| I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | |
| GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); |
| |
| gen7_setup_fixed_func_scheduler(dev_priv); |
| |
| /* |
| * According to the spec, bit 13 (RCZUNIT) must be set on IVB. |
| * This implements the WaDisableRCZUnitClockGating:vlv workaround. |
| */ |
| I915_WRITE(GEN6_UCGCTL2, |
| GEN6_RCZUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaDisableL3Bank2xClockGate:vlv |
| * Disabling L3 clock gating- MMIO 940c[25] = 1 |
| * Set bit 25, to disable L3_BANK_2x_CLK_GATING */ |
| I915_WRITE(GEN7_UCGCTL4, |
| I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE); |
| |
| /* |
| * BSpec says this must be set, even though |
| * WaDisable4x2SubspanOptimization isn't listed for VLV. |
| */ |
| I915_WRITE(CACHE_MODE_1, |
| _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| I915_WRITE(GEN7_GT_MODE, |
| _MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4)); |
| |
| /* |
| * WaIncreaseL3CreditsForVLVB0:vlv |
| * This is the hardware default actually. |
| */ |
| I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE); |
| |
| /* |
| * WaDisableVLVClockGating_VBIIssue:vlv |
| * Disable clock gating on th GCFG unit to prevent a delay |
| * in the reporting of vblank events. |
| */ |
| I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS); |
| } |
| |
| static void cherryview_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| vlv_init_display_clock_gating(dev_priv); |
| |
| /* WaVSRefCountFullforceMissDisable:chv */ |
| /* WaDSRefCountFullforceMissDisable:chv */ |
| I915_WRITE(GEN7_FF_THREAD_MODE, |
| I915_READ(GEN7_FF_THREAD_MODE) & |
| ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME)); |
| |
| /* WaDisableSemaphoreAndSyncFlipWait:chv */ |
| I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL, |
| _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE)); |
| |
| /* WaDisableCSUnitClockGating:chv */ |
| I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | |
| GEN6_CSUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaDisableSDEUnitClockGating:chv */ |
| I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | |
| GEN8_SDEUNIT_CLOCK_GATE_DISABLE); |
| } |
| |
| static void g4x_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dspclk_gate; |
| |
| I915_WRITE(RENCLK_GATE_D1, 0); |
| I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | |
| GS_UNIT_CLOCK_GATE_DISABLE | |
| CL_UNIT_CLOCK_GATE_DISABLE); |
| I915_WRITE(RAMCLK_GATE_D, 0); |
| dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | |
| OVRUNIT_CLOCK_GATE_DISABLE | |
| OVCUNIT_CLOCK_GATE_DISABLE; |
| if (IS_GM45(dev)) |
| dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; |
| I915_WRITE(DSPCLK_GATE_D, dspclk_gate); |
| |
| /* WaDisableRenderCachePipelinedFlush */ |
| I915_WRITE(CACHE_MODE_0, |
| _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:g4x */ |
| I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| |
| g4x_disable_trickle_feed(dev); |
| } |
| |
| static void crestline_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); |
| I915_WRITE(RENCLK_GATE_D2, 0); |
| I915_WRITE(DSPCLK_GATE_D, 0); |
| I915_WRITE(RAMCLK_GATE_D, 0); |
| I915_WRITE16(DEUC, 0); |
| I915_WRITE(MI_ARB_STATE, |
| _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:gen4 */ |
| I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| } |
| |
| static void broadwater_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | |
| I965_RCC_CLOCK_GATE_DISABLE | |
| I965_RCPB_CLOCK_GATE_DISABLE | |
| I965_ISC_CLOCK_GATE_DISABLE | |
| I965_FBC_CLOCK_GATE_DISABLE); |
| I915_WRITE(RENCLK_GATE_D2, 0); |
| I915_WRITE(MI_ARB_STATE, |
| _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); |
| |
| /* WaDisable_RenderCache_OperationalFlush:gen4 */ |
| I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); |
| } |
| |
| static void gen3_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 dstate = I915_READ(D_STATE); |
| |
| dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | |
| DSTATE_DOT_CLOCK_GATING; |
| I915_WRITE(D_STATE, dstate); |
| |
| if (IS_PINEVIEW(dev)) |
| I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY)); |
| |
| /* IIR "flip pending" means done if this bit is set */ |
| I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); |
| |
| /* interrupts should cause a wake up from C3 */ |
| I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN)); |
| |
| /* On GEN3 we really need to make sure the ARB C3 LP bit is set */ |
| I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE)); |
| |
| I915_WRITE(MI_ARB_STATE, |
| _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); |
| } |
| |
| static void i85x_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); |
| |
| /* interrupts should cause a wake up from C3 */ |
| I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) | |
| _MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE)); |
| |
| I915_WRITE(MEM_MODE, |
| _MASKED_BIT_ENABLE(MEM_DISPLAY_TRICKLE_FEED_DISABLE)); |
| } |
| |
| static void i830_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); |
| |
| I915_WRITE(MEM_MODE, |
| _MASKED_BIT_ENABLE(MEM_DISPLAY_A_TRICKLE_FEED_DISABLE) | |
| _MASKED_BIT_ENABLE(MEM_DISPLAY_B_TRICKLE_FEED_DISABLE)); |
| } |
| |
| void intel_init_clock_gating(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (dev_priv->display.init_clock_gating) |
| dev_priv->display.init_clock_gating(dev); |
| } |
| |
| void intel_suspend_hw(struct drm_device *dev) |
| { |
| if (HAS_PCH_LPT(dev)) |
| lpt_suspend_hw(dev); |
| } |
| |
| /* Set up chip specific power management-related functions */ |
| void intel_init_pm(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| intel_fbc_init(dev_priv); |
| |
| /* For cxsr */ |
| if (IS_PINEVIEW(dev)) |
| i915_pineview_get_mem_freq(dev); |
| else if (IS_GEN5(dev)) |
| i915_ironlake_get_mem_freq(dev); |
| |
| /* For FIFO watermark updates */ |
| if (INTEL_INFO(dev)->gen >= 9) { |
| skl_setup_wm_latency(dev); |
| |
| dev_priv->display.init_clock_gating = skl_init_clock_gating; |
| dev_priv->display.update_wm = skl_update_wm; |
| dev_priv->display.update_sprite_wm = skl_update_sprite_wm; |
| } else if (HAS_PCH_SPLIT(dev)) { |
| ilk_setup_wm_latency(dev); |
| |
| if ((IS_GEN5(dev) && dev_priv->wm.pri_latency[1] && |
| dev_priv->wm.spr_latency[1] && dev_priv->wm.cur_latency[1]) || |
| (!IS_GEN5(dev) && dev_priv->wm.pri_latency[0] && |
| dev_priv->wm.spr_latency[0] && dev_priv->wm.cur_latency[0])) { |
| dev_priv->display.update_wm = ilk_update_wm; |
| dev_priv->display.update_sprite_wm = ilk_update_sprite_wm; |
| } else { |
| DRM_DEBUG_KMS("Failed to read display plane latency. " |
| "Disable CxSR\n"); |
| } |
| |
| if (IS_GEN5(dev)) |
| dev_priv->display.init_clock_gating = ironlake_init_clock_gating; |
| else if (IS_GEN6(dev)) |
| dev_priv->display.init_clock_gating = gen6_init_clock_gating; |
| else if (IS_IVYBRIDGE(dev)) |
| dev_priv->display.init_clock_gating = ivybridge_init_clock_gating; |
| else if (IS_HASWELL(dev)) |
| dev_priv->display.init_clock_gating = haswell_init_clock_gating; |
| else if (INTEL_INFO(dev)->gen == 8) |
| dev_priv->display.init_clock_gating = broadwell_init_clock_gating; |
| } else if (IS_CHERRYVIEW(dev)) { |
| dev_priv->display.update_wm = valleyview_update_wm; |
| dev_priv->display.update_sprite_wm = valleyview_update_sprite_wm; |
| dev_priv->display.init_clock_gating = |
| cherryview_init_clock_gating; |
| } else if (IS_VALLEYVIEW(dev)) { |
| dev_priv->display.update_wm = valleyview_update_wm; |
| dev_priv->display.update_sprite_wm = valleyview_update_sprite_wm; |
| dev_priv->display.init_clock_gating = |
| valleyview_init_clock_gating; |
| } else if (IS_PINEVIEW(dev)) { |
| if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev), |
| dev_priv->is_ddr3, |
| dev_priv->fsb_freq, |
| dev_priv->mem_freq)) { |
| DRM_INFO("failed to find known CxSR latency " |
| "(found ddr%s fsb freq %d, mem freq %d), " |
| "disabling CxSR\n", |
| (dev_priv->is_ddr3 == 1) ? "3" : "2", |
| dev_priv->fsb_freq, dev_priv->mem_freq); |
| /* Disable CxSR and never update its watermark again */ |
| intel_set_memory_cxsr(dev_priv, false); |
| dev_priv->display.update_wm = NULL; |
| } else |
| dev_priv->display.update_wm = pineview_update_wm; |
| dev_priv->display.init_clock_gating = gen3_init_clock_gating; |
| } else if (IS_G4X(dev)) { |
| dev_priv->display.update_wm = g4x_update_wm; |
| dev_priv->display.init_clock_gating = g4x_init_clock_gating; |
| } else if (IS_GEN4(dev)) { |
| dev_priv->display.update_wm = i965_update_wm; |
| if (IS_CRESTLINE(dev)) |
| dev_priv->display.init_clock_gating = crestline_init_clock_gating; |
| else if (IS_BROADWATER(dev)) |
| dev_priv->display.init_clock_gating = broadwater_init_clock_gating; |
| } else if (IS_GEN3(dev)) { |
| dev_priv->display.update_wm = i9xx_update_wm; |
| dev_priv->display.get_fifo_size = i9xx_get_fifo_size; |
| dev_priv->display.init_clock_gating = gen3_init_clock_gating; |
| } else if (IS_GEN2(dev)) { |
| if (INTEL_INFO(dev)->num_pipes == 1) { |
| dev_priv->display.update_wm = i845_update_wm; |
| dev_priv->display.get_fifo_size = i845_get_fifo_size; |
| } else { |
| dev_priv->display.update_wm = i9xx_update_wm; |
| dev_priv->display.get_fifo_size = i830_get_fifo_size; |
| } |
| |
| if (IS_I85X(dev) || IS_I865G(dev)) |
| dev_priv->display.init_clock_gating = i85x_init_clock_gating; |
| else |
| dev_priv->display.init_clock_gating = i830_init_clock_gating; |
| } else { |
| DRM_ERROR("unexpected fall-through in intel_init_pm\n"); |
| } |
| } |
| |
| int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val) |
| { |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { |
| DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n"); |
| return -EAGAIN; |
| } |
| |
| I915_WRITE(GEN6_PCODE_DATA, *val); |
| I915_WRITE(GEN6_PCODE_DATA1, 0); |
| I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); |
| |
| if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, |
| 500)) { |
| DRM_ERROR("timeout waiting for pcode read (%d) to finish\n", mbox); |
| return -ETIMEDOUT; |
| } |
| |
| *val = I915_READ(GEN6_PCODE_DATA); |
| I915_WRITE(GEN6_PCODE_DATA, 0); |
| |
| return 0; |
| } |
| |
| int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val) |
| { |
| WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); |
| |
| if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { |
| DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n"); |
| return -EAGAIN; |
| } |
| |
| I915_WRITE(GEN6_PCODE_DATA, val); |
| I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); |
| |
| if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, |
| 500)) { |
| DRM_ERROR("timeout waiting for pcode write (%d) to finish\n", mbox); |
| return -ETIMEDOUT; |
| } |
| |
| I915_WRITE(GEN6_PCODE_DATA, 0); |
| |
| return 0; |
| } |
| |
| static int vlv_gpu_freq_div(unsigned int czclk_freq) |
| { |
| switch (czclk_freq) { |
| case 200: |
| return 10; |
| case 267: |
| return 12; |
| case 320: |
| case 333: |
| return 16; |
| case 400: |
| return 20; |
| default: |
| return -1; |
| } |
| } |
| |
| static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val) |
| { |
| int div, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->mem_freq, 4); |
| |
| div = vlv_gpu_freq_div(czclk_freq); |
| if (div < 0) |
| return div; |
| |
| return DIV_ROUND_CLOSEST(czclk_freq * (val + 6 - 0xbd), div); |
| } |
| |
| static int byt_freq_opcode(struct drm_i915_private *dev_priv, int val) |
| { |
| int mul, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->mem_freq, 4); |
| |
| mul = vlv_gpu_freq_div(czclk_freq); |
| if (mul < 0) |
| return mul; |
| |
| return DIV_ROUND_CLOSEST(mul * val, czclk_freq) + 0xbd - 6; |
| } |
| |
| static int chv_gpu_freq(struct drm_i915_private *dev_priv, int val) |
| { |
| int div, czclk_freq = dev_priv->rps.cz_freq; |
| |
| div = vlv_gpu_freq_div(czclk_freq) / 2; |
| if (div < 0) |
| return div; |
| |
| return DIV_ROUND_CLOSEST(czclk_freq * val, 2 * div) / 2; |
| } |
| |
| static int chv_freq_opcode(struct drm_i915_private *dev_priv, int val) |
| { |
| int mul, czclk_freq = dev_priv->rps.cz_freq; |
| |
| mul = vlv_gpu_freq_div(czclk_freq) / 2; |
| if (mul < 0) |
| return mul; |
| |
| /* CHV needs even values */ |
| return DIV_ROUND_CLOSEST(val * 2 * mul, czclk_freq) * 2; |
| } |
| |
| int intel_gpu_freq(struct drm_i915_private *dev_priv, int val) |
| { |
| if (IS_CHERRYVIEW(dev_priv->dev)) |
| return chv_gpu_freq(dev_priv, val); |
| else if (IS_VALLEYVIEW(dev_priv->dev)) |
| return byt_gpu_freq(dev_priv, val); |
| else |
| return val * GT_FREQUENCY_MULTIPLIER; |
| } |
| |
| int intel_freq_opcode(struct drm_i915_private *dev_priv, int val) |
| { |
| if (IS_CHERRYVIEW(dev_priv->dev)) |
| return chv_freq_opcode(dev_priv, val); |
| else if (IS_VALLEYVIEW(dev_priv->dev)) |
| return byt_freq_opcode(dev_priv, val); |
| else |
| return val / GT_FREQUENCY_MULTIPLIER; |
| } |
| |
| void intel_pm_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| mutex_init(&dev_priv->rps.hw_lock); |
| |
| INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, |
| intel_gen6_powersave_work); |
| |
| dev_priv->pm.suspended = false; |
| } |