| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/sysrq.h> |
| #include <linux/slab.h> |
| #include <linux/circ_buf.h> |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| |
| /** |
| * DOC: interrupt handling |
| * |
| * These functions provide the basic support for enabling and disabling the |
| * interrupt handling support. There's a lot more functionality in i915_irq.c |
| * and related files, but that will be described in separate chapters. |
| */ |
| |
| static const u32 hpd_ilk[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ivb[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG_IVB, |
| }; |
| |
| static const u32 hpd_bdw[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = GEN8_PORT_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ibx[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG |
| }; |
| |
| static const u32 hpd_cpt[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG_CPT, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT |
| }; |
| |
| static const u32 hpd_spt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_PORTA_HOTPLUG_SPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT, |
| [HPD_PORT_E] = SDE_PORTE_HOTPLUG_SPT |
| }; |
| |
| static const u32 hpd_mask_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_EN, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN |
| }; |
| |
| static const u32 hpd_status_g4x[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS |
| }; |
| |
| static const u32 hpd_status_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS |
| }; |
| |
| /* BXT hpd list */ |
| static const u32 hpd_bxt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = BXT_DE_PORT_HP_DDIA, |
| [HPD_PORT_B] = BXT_DE_PORT_HP_DDIB, |
| [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC |
| }; |
| |
| static const u32 hpd_gen11[HPD_NUM_PINS] = { |
| [HPD_PORT_C] = GEN11_TC1_HOTPLUG | GEN11_TBT1_HOTPLUG, |
| [HPD_PORT_D] = GEN11_TC2_HOTPLUG | GEN11_TBT2_HOTPLUG, |
| [HPD_PORT_E] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG, |
| [HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG |
| }; |
| |
| static const u32 hpd_icp[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_DDIA_HOTPLUG_ICP, |
| [HPD_PORT_B] = SDE_DDIB_HOTPLUG_ICP, |
| [HPD_PORT_C] = SDE_TC1_HOTPLUG_ICP, |
| [HPD_PORT_D] = SDE_TC2_HOTPLUG_ICP, |
| [HPD_PORT_E] = SDE_TC3_HOTPLUG_ICP, |
| [HPD_PORT_F] = SDE_TC4_HOTPLUG_ICP |
| }; |
| |
| /* IIR can theoretically queue up two events. Be paranoid. */ |
| #define GEN8_IRQ_RESET_NDX(type, which) do { \ |
| I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IMR(which)); \ |
| I915_WRITE(GEN8_##type##_IER(which), 0); \ |
| I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IIR(which)); \ |
| I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IIR(which)); \ |
| } while (0) |
| |
| #define GEN3_IRQ_RESET(type) do { \ |
| I915_WRITE(type##IMR, 0xffffffff); \ |
| POSTING_READ(type##IMR); \ |
| I915_WRITE(type##IER, 0); \ |
| I915_WRITE(type##IIR, 0xffffffff); \ |
| POSTING_READ(type##IIR); \ |
| I915_WRITE(type##IIR, 0xffffffff); \ |
| POSTING_READ(type##IIR); \ |
| } while (0) |
| |
| #define GEN2_IRQ_RESET(type) do { \ |
| I915_WRITE16(type##IMR, 0xffff); \ |
| POSTING_READ16(type##IMR); \ |
| I915_WRITE16(type##IER, 0); \ |
| I915_WRITE16(type##IIR, 0xffff); \ |
| POSTING_READ16(type##IIR); \ |
| I915_WRITE16(type##IIR, 0xffff); \ |
| POSTING_READ16(type##IIR); \ |
| } while (0) |
| |
| /* |
| * We should clear IMR at preinstall/uninstall, and just check at postinstall. |
| */ |
| static void gen3_assert_iir_is_zero(struct drm_i915_private *dev_priv, |
| i915_reg_t reg) |
| { |
| u32 val = I915_READ(reg); |
| |
| if (val == 0) |
| return; |
| |
| WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", |
| i915_mmio_reg_offset(reg), val); |
| I915_WRITE(reg, 0xffffffff); |
| POSTING_READ(reg); |
| I915_WRITE(reg, 0xffffffff); |
| POSTING_READ(reg); |
| } |
| |
| static void gen2_assert_iir_is_zero(struct drm_i915_private *dev_priv, |
| i915_reg_t reg) |
| { |
| u16 val = I915_READ16(reg); |
| |
| if (val == 0) |
| return; |
| |
| WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", |
| i915_mmio_reg_offset(reg), val); |
| I915_WRITE16(reg, 0xffff); |
| POSTING_READ16(reg); |
| I915_WRITE16(reg, 0xffff); |
| POSTING_READ16(reg); |
| } |
| |
| #define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \ |
| gen3_assert_iir_is_zero(dev_priv, GEN8_##type##_IIR(which)); \ |
| I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \ |
| I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ |
| POSTING_READ(GEN8_##type##_IMR(which)); \ |
| } while (0) |
| |
| #define GEN3_IRQ_INIT(type, imr_val, ier_val) do { \ |
| gen3_assert_iir_is_zero(dev_priv, type##IIR); \ |
| I915_WRITE(type##IER, (ier_val)); \ |
| I915_WRITE(type##IMR, (imr_val)); \ |
| POSTING_READ(type##IMR); \ |
| } while (0) |
| |
| #define GEN2_IRQ_INIT(type, imr_val, ier_val) do { \ |
| gen2_assert_iir_is_zero(dev_priv, type##IIR); \ |
| I915_WRITE16(type##IER, (ier_val)); \ |
| I915_WRITE16(type##IMR, (imr_val)); \ |
| POSTING_READ16(type##IMR); \ |
| } while (0) |
| |
| static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir); |
| static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir); |
| |
| /* For display hotplug interrupt */ |
| static inline void |
| i915_hotplug_interrupt_update_locked(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits) |
| { |
| uint32_t val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| WARN_ON(bits & ~mask); |
| |
| val = I915_READ(PORT_HOTPLUG_EN); |
| val &= ~mask; |
| val |= bits; |
| I915_WRITE(PORT_HOTPLUG_EN, val); |
| } |
| |
| /** |
| * i915_hotplug_interrupt_update - update hotplug interrupt enable |
| * @dev_priv: driver private |
| * @mask: bits to update |
| * @bits: bits to enable |
| * NOTE: the HPD enable bits are modified both inside and outside |
| * of an interrupt context. To avoid that read-modify-write cycles |
| * interfer, these bits are protected by a spinlock. Since this |
| * function is usually not called from a context where the lock is |
| * held already, this function acquires the lock itself. A non-locking |
| * version is also available. |
| */ |
| void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_hotplug_interrupt_update_locked(dev_priv, mask, bits); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static u32 |
| gen11_gt_engine_identity(struct drm_i915_private * const i915, |
| const unsigned int bank, const unsigned int bit); |
| |
| static bool gen11_reset_one_iir(struct drm_i915_private * const i915, |
| const unsigned int bank, |
| const unsigned int bit) |
| { |
| void __iomem * const regs = i915->regs; |
| u32 dw; |
| |
| lockdep_assert_held(&i915->irq_lock); |
| |
| dw = raw_reg_read(regs, GEN11_GT_INTR_DW(bank)); |
| if (dw & BIT(bit)) { |
| /* |
| * According to the BSpec, DW_IIR bits cannot be cleared without |
| * first servicing the Selector & Shared IIR registers. |
| */ |
| gen11_gt_engine_identity(i915, bank, bit); |
| |
| /* |
| * We locked GT INT DW by reading it. If we want to (try |
| * to) recover from this succesfully, we need to clear |
| * our bit, otherwise we are locking the register for |
| * everybody. |
| */ |
| raw_reg_write(regs, GEN11_GT_INTR_DW(bank), BIT(bit)); |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * ilk_update_display_irq - update DEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ilk_update_display_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->irq_mask; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->irq_mask) { |
| dev_priv->irq_mask = new_val; |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| POSTING_READ(DEIMR); |
| } |
| } |
| |
| /** |
| * ilk_update_gt_irq - update GTIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void ilk_update_gt_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| dev_priv->gt_irq_mask &= ~interrupt_mask; |
| dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| } |
| |
| void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| ilk_update_gt_irq(dev_priv, mask, mask); |
| POSTING_READ_FW(GTIMR); |
| } |
| |
| void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| ilk_update_gt_irq(dev_priv, mask, 0); |
| } |
| |
| static i915_reg_t gen6_pm_iir(struct drm_i915_private *dev_priv) |
| { |
| WARN_ON_ONCE(INTEL_GEN(dev_priv) >= 11); |
| |
| return INTEL_GEN(dev_priv) >= 8 ? GEN8_GT_IIR(2) : GEN6_PMIIR; |
| } |
| |
| static i915_reg_t gen6_pm_imr(struct drm_i915_private *dev_priv) |
| { |
| if (INTEL_GEN(dev_priv) >= 11) |
| return GEN11_GPM_WGBOXPERF_INTR_MASK; |
| else if (INTEL_GEN(dev_priv) >= 8) |
| return GEN8_GT_IMR(2); |
| else |
| return GEN6_PMIMR; |
| } |
| |
| static i915_reg_t gen6_pm_ier(struct drm_i915_private *dev_priv) |
| { |
| if (INTEL_GEN(dev_priv) >= 11) |
| return GEN11_GPM_WGBOXPERF_INTR_ENABLE; |
| else if (INTEL_GEN(dev_priv) >= 8) |
| return GEN8_GT_IER(2); |
| else |
| return GEN6_PMIER; |
| } |
| |
| /** |
| * snb_update_pm_irq - update GEN6_PMIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void snb_update_pm_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| new_val = dev_priv->pm_imr; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->pm_imr) { |
| dev_priv->pm_imr = new_val; |
| I915_WRITE(gen6_pm_imr(dev_priv), dev_priv->pm_imr); |
| POSTING_READ(gen6_pm_imr(dev_priv)); |
| } |
| } |
| |
| void gen6_unmask_pm_irq(struct drm_i915_private *dev_priv, u32 mask) |
| { |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| snb_update_pm_irq(dev_priv, mask, mask); |
| } |
| |
| static void __gen6_mask_pm_irq(struct drm_i915_private *dev_priv, u32 mask) |
| { |
| snb_update_pm_irq(dev_priv, mask, 0); |
| } |
| |
| void gen6_mask_pm_irq(struct drm_i915_private *dev_priv, u32 mask) |
| { |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| __gen6_mask_pm_irq(dev_priv, mask); |
| } |
| |
| static void gen6_reset_pm_iir(struct drm_i915_private *dev_priv, u32 reset_mask) |
| { |
| i915_reg_t reg = gen6_pm_iir(dev_priv); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| I915_WRITE(reg, reset_mask); |
| I915_WRITE(reg, reset_mask); |
| POSTING_READ(reg); |
| } |
| |
| static void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, u32 enable_mask) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| dev_priv->pm_ier |= enable_mask; |
| I915_WRITE(gen6_pm_ier(dev_priv), dev_priv->pm_ier); |
| gen6_unmask_pm_irq(dev_priv, enable_mask); |
| /* unmask_pm_irq provides an implicit barrier (POSTING_READ) */ |
| } |
| |
| static void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, u32 disable_mask) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| dev_priv->pm_ier &= ~disable_mask; |
| __gen6_mask_pm_irq(dev_priv, disable_mask); |
| I915_WRITE(gen6_pm_ier(dev_priv), dev_priv->pm_ier); |
| /* though a barrier is missing here, but don't really need a one */ |
| } |
| |
| void gen11_reset_rps_interrupts(struct drm_i915_private *dev_priv) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| while (gen11_reset_one_iir(dev_priv, 0, GEN11_GTPM)) |
| ; |
| |
| dev_priv->gt_pm.rps.pm_iir = 0; |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen6_reset_rps_interrupts(struct drm_i915_private *dev_priv) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| gen6_reset_pm_iir(dev_priv, GEN6_PM_RPS_EVENTS); |
| dev_priv->gt_pm.rps.pm_iir = 0; |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen6_enable_rps_interrupts(struct drm_i915_private *dev_priv) |
| { |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| |
| if (READ_ONCE(rps->interrupts_enabled)) |
| return; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| WARN_ON_ONCE(rps->pm_iir); |
| |
| if (INTEL_GEN(dev_priv) >= 11) |
| WARN_ON_ONCE(gen11_reset_one_iir(dev_priv, 0, GEN11_GTPM)); |
| else |
| WARN_ON_ONCE(I915_READ(gen6_pm_iir(dev_priv)) & dev_priv->pm_rps_events); |
| |
| rps->interrupts_enabled = true; |
| gen6_enable_pm_irq(dev_priv, dev_priv->pm_rps_events); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen6_disable_rps_interrupts(struct drm_i915_private *dev_priv) |
| { |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| |
| if (!READ_ONCE(rps->interrupts_enabled)) |
| return; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| rps->interrupts_enabled = false; |
| |
| I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0u)); |
| |
| gen6_disable_pm_irq(dev_priv, GEN6_PM_RPS_EVENTS); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| synchronize_irq(dev_priv->drm.irq); |
| |
| /* Now that we will not be generating any more work, flush any |
| * outstanding tasks. As we are called on the RPS idle path, |
| * we will reset the GPU to minimum frequencies, so the current |
| * state of the worker can be discarded. |
| */ |
| cancel_work_sync(&rps->work); |
| if (INTEL_GEN(dev_priv) >= 11) |
| gen11_reset_rps_interrupts(dev_priv); |
| else |
| gen6_reset_rps_interrupts(dev_priv); |
| } |
| |
| void gen9_reset_guc_interrupts(struct drm_i915_private *dev_priv) |
| { |
| assert_rpm_wakelock_held(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| gen6_reset_pm_iir(dev_priv, dev_priv->pm_guc_events); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv) |
| { |
| assert_rpm_wakelock_held(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (!dev_priv->guc.interrupts_enabled) { |
| WARN_ON_ONCE(I915_READ(gen6_pm_iir(dev_priv)) & |
| dev_priv->pm_guc_events); |
| dev_priv->guc.interrupts_enabled = true; |
| gen6_enable_pm_irq(dev_priv, dev_priv->pm_guc_events); |
| } |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv) |
| { |
| assert_rpm_wakelock_held(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| dev_priv->guc.interrupts_enabled = false; |
| |
| gen6_disable_pm_irq(dev_priv, dev_priv->pm_guc_events); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| synchronize_irq(dev_priv->drm.irq); |
| |
| gen9_reset_guc_interrupts(dev_priv); |
| } |
| |
| /** |
| * bdw_update_port_irq - update DE port interrupt |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void bdw_update_port_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| uint32_t old_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| old_val = I915_READ(GEN8_DE_PORT_IMR); |
| |
| new_val = old_val; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != old_val) { |
| I915_WRITE(GEN8_DE_PORT_IMR, new_val); |
| POSTING_READ(GEN8_DE_PORT_IMR); |
| } |
| } |
| |
| /** |
| * bdw_update_pipe_irq - update DE pipe interrupt |
| * @dev_priv: driver private |
| * @pipe: pipe whose interrupt to update |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void bdw_update_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->de_irq_mask[pipe]; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->de_irq_mask[pipe]) { |
| dev_priv->de_irq_mask[pipe] = new_val; |
| I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]); |
| POSTING_READ(GEN8_DE_PIPE_IMR(pipe)); |
| } |
| } |
| |
| /** |
| * ibx_display_interrupt_update - update SDEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t sdeimr = I915_READ(SDEIMR); |
| sdeimr &= ~interrupt_mask; |
| sdeimr |= (~enabled_irq_mask & interrupt_mask); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| I915_WRITE(SDEIMR, sdeimr); |
| POSTING_READ(SDEIMR); |
| } |
| |
| u32 i915_pipestat_enable_mask(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| u32 status_mask = dev_priv->pipestat_irq_mask[pipe]; |
| u32 enable_mask = status_mask << 16; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (INTEL_GEN(dev_priv) < 5) |
| goto out; |
| |
| /* |
| * On pipe A we don't support the PSR interrupt yet, |
| * on pipe B and C the same bit MBZ. |
| */ |
| if (WARN_ON_ONCE(status_mask & PIPE_A_PSR_STATUS_VLV)) |
| return 0; |
| /* |
| * On pipe B and C we don't support the PSR interrupt yet, on pipe |
| * A the same bit is for perf counters which we don't use either. |
| */ |
| if (WARN_ON_ONCE(status_mask & PIPE_B_PSR_STATUS_VLV)) |
| return 0; |
| |
| enable_mask &= ~(PIPE_FIFO_UNDERRUN_STATUS | |
| SPRITE0_FLIP_DONE_INT_EN_VLV | |
| SPRITE1_FLIP_DONE_INT_EN_VLV); |
| if (status_mask & SPRITE0_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE0_FLIP_DONE_INT_EN_VLV; |
| if (status_mask & SPRITE1_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE1_FLIP_DONE_INT_EN_VLV; |
| |
| out: |
| WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || |
| status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", |
| pipe_name(pipe), enable_mask, status_mask); |
| |
| return enable_mask; |
| } |
| |
| void i915_enable_pipestat(struct drm_i915_private *dev_priv, |
| enum pipe pipe, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 enable_mask; |
| |
| WARN_ONCE(status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: status_mask=0x%x\n", |
| pipe_name(pipe), status_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| WARN_ON(!intel_irqs_enabled(dev_priv)); |
| |
| if ((dev_priv->pipestat_irq_mask[pipe] & status_mask) == status_mask) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] |= status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| I915_WRITE(reg, enable_mask | status_mask); |
| POSTING_READ(reg); |
| } |
| |
| void i915_disable_pipestat(struct drm_i915_private *dev_priv, |
| enum pipe pipe, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 enable_mask; |
| |
| WARN_ONCE(status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: status_mask=0x%x\n", |
| pipe_name(pipe), status_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| WARN_ON(!intel_irqs_enabled(dev_priv)); |
| |
| if ((dev_priv->pipestat_irq_mask[pipe] & status_mask) == 0) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] &= ~status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| I915_WRITE(reg, enable_mask | status_mask); |
| POSTING_READ(reg); |
| } |
| |
| /** |
| * i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion |
| * @dev_priv: i915 device private |
| */ |
| static void i915_enable_asle_pipestat(struct drm_i915_private *dev_priv) |
| { |
| if (!dev_priv->opregion.asle || !IS_MOBILE(dev_priv)) |
| return; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS); |
| if (INTEL_GEN(dev_priv) >= 4) |
| i915_enable_pipestat(dev_priv, PIPE_A, |
| PIPE_LEGACY_BLC_EVENT_STATUS); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| /* |
| * This timing diagram depicts the video signal in and |
| * around the vertical blanking period. |
| * |
| * Assumptions about the fictitious mode used in this example: |
| * vblank_start >= 3 |
| * vsync_start = vblank_start + 1 |
| * vsync_end = vblank_start + 2 |
| * vtotal = vblank_start + 3 |
| * |
| * start of vblank: |
| * latch double buffered registers |
| * increment frame counter (ctg+) |
| * generate start of vblank interrupt (gen4+) |
| * | |
| * | frame start: |
| * | generate frame start interrupt (aka. vblank interrupt) (gmch) |
| * | may be shifted forward 1-3 extra lines via PIPECONF |
| * | | |
| * | | start of vsync: |
| * | | generate vsync interrupt |
| * | | | |
| * ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx |
| * . \hs/ . \hs/ \hs/ \hs/ . \hs/ |
| * ----va---> <-----------------vb--------------------> <--------va------------- |
| * | | <----vs-----> | |
| * -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2) |
| * -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+) |
| * -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi) |
| * | | | |
| * last visible pixel first visible pixel |
| * | increment frame counter (gen3/4) |
| * pixel counter = vblank_start * htotal pixel counter = 0 (gen3/4) |
| * |
| * x = horizontal active |
| * _ = horizontal blanking |
| * hs = horizontal sync |
| * va = vertical active |
| * vb = vertical blanking |
| * vs = vertical sync |
| * vbs = vblank_start (number) |
| * |
| * Summary: |
| * - most events happen at the start of horizontal sync |
| * - frame start happens at the start of horizontal blank, 1-4 lines |
| * (depending on PIPECONF settings) after the start of vblank |
| * - gen3/4 pixel and frame counter are synchronized with the start |
| * of horizontal active on the first line of vertical active |
| */ |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| static u32 i915_get_vblank_counter(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| i915_reg_t high_frame, low_frame; |
| u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal; |
| const struct drm_display_mode *mode = &dev->vblank[pipe].hwmode; |
| unsigned long irqflags; |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vbl_start = mode->crtc_vblank_start; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| |
| /* Convert to pixel count */ |
| vbl_start *= htotal; |
| |
| /* Start of vblank event occurs at start of hsync */ |
| vbl_start -= htotal - hsync_start; |
| |
| high_frame = PIPEFRAME(pipe); |
| low_frame = PIPEFRAMEPIXEL(pipe); |
| |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = I915_READ_FW(high_frame) & PIPE_FRAME_HIGH_MASK; |
| low = I915_READ_FW(low_frame); |
| high2 = I915_READ_FW(high_frame) & PIPE_FRAME_HIGH_MASK; |
| } while (high1 != high2); |
| |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| high1 >>= PIPE_FRAME_HIGH_SHIFT; |
| pixel = low & PIPE_PIXEL_MASK; |
| low >>= PIPE_FRAME_LOW_SHIFT; |
| |
| /* |
| * The frame counter increments at beginning of active. |
| * Cook up a vblank counter by also checking the pixel |
| * counter against vblank start. |
| */ |
| return (((high1 << 8) | low) + (pixel >= vbl_start)) & 0xffffff; |
| } |
| |
| static u32 g4x_get_vblank_counter(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| return I915_READ(PIPE_FRMCOUNT_G4X(pipe)); |
| } |
| |
| /* |
| * On certain encoders on certain platforms, pipe |
| * scanline register will not work to get the scanline, |
| * since the timings are driven from the PORT or issues |
| * with scanline register updates. |
| * This function will use Framestamp and current |
| * timestamp registers to calculate the scanline. |
| */ |
| static u32 __intel_get_crtc_scanline_from_timestamp(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct drm_vblank_crtc *vblank = |
| &crtc->base.dev->vblank[drm_crtc_index(&crtc->base)]; |
| const struct drm_display_mode *mode = &vblank->hwmode; |
| u32 vblank_start = mode->crtc_vblank_start; |
| u32 vtotal = mode->crtc_vtotal; |
| u32 htotal = mode->crtc_htotal; |
| u32 clock = mode->crtc_clock; |
| u32 scanline, scan_prev_time, scan_curr_time, scan_post_time; |
| |
| /* |
| * To avoid the race condition where we might cross into the |
| * next vblank just between the PIPE_FRMTMSTMP and TIMESTAMP_CTR |
| * reads. We make sure we read PIPE_FRMTMSTMP and TIMESTAMP_CTR |
| * during the same frame. |
| */ |
| do { |
| /* |
| * This field provides read back of the display |
| * pipe frame time stamp. The time stamp value |
| * is sampled at every start of vertical blank. |
| */ |
| scan_prev_time = I915_READ_FW(PIPE_FRMTMSTMP(crtc->pipe)); |
| |
| /* |
| * The TIMESTAMP_CTR register has the current |
| * time stamp value. |
| */ |
| scan_curr_time = I915_READ_FW(IVB_TIMESTAMP_CTR); |
| |
| scan_post_time = I915_READ_FW(PIPE_FRMTMSTMP(crtc->pipe)); |
| } while (scan_post_time != scan_prev_time); |
| |
| scanline = div_u64(mul_u32_u32(scan_curr_time - scan_prev_time, |
| clock), 1000 * htotal); |
| scanline = min(scanline, vtotal - 1); |
| scanline = (scanline + vblank_start) % vtotal; |
| |
| return scanline; |
| } |
| |
| /* I915_READ_FW, only for fast reads of display block, no need for forcewake etc. */ |
| static int __intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| const struct drm_display_mode *mode; |
| struct drm_vblank_crtc *vblank; |
| enum pipe pipe = crtc->pipe; |
| int position, vtotal; |
| |
| if (!crtc->active) |
| return -1; |
| |
| vblank = &crtc->base.dev->vblank[drm_crtc_index(&crtc->base)]; |
| mode = &vblank->hwmode; |
| |
| if (mode->private_flags & I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP) |
| return __intel_get_crtc_scanline_from_timestamp(crtc); |
| |
| vtotal = mode->crtc_vtotal; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vtotal /= 2; |
| |
| if (IS_GEN2(dev_priv)) |
| position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN2; |
| else |
| position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; |
| |
| /* |
| * On HSW, the DSL reg (0x70000) appears to return 0 if we |
| * read it just before the start of vblank. So try it again |
| * so we don't accidentally end up spanning a vblank frame |
| * increment, causing the pipe_update_end() code to squak at us. |
| * |
| * The nature of this problem means we can't simply check the ISR |
| * bit and return the vblank start value; nor can we use the scanline |
| * debug register in the transcoder as it appears to have the same |
| * problem. We may need to extend this to include other platforms, |
| * but so far testing only shows the problem on HSW. |
| */ |
| if (HAS_DDI(dev_priv) && !position) { |
| int i, temp; |
| |
| for (i = 0; i < 100; i++) { |
| udelay(1); |
| temp = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; |
| if (temp != position) { |
| position = temp; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * See update_scanline_offset() for the details on the |
| * scanline_offset adjustment. |
| */ |
| return (position + crtc->scanline_offset) % vtotal; |
| } |
| |
| static bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe, |
| bool in_vblank_irq, int *vpos, int *hpos, |
| ktime_t *stime, ktime_t *etime, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_crtc *intel_crtc = intel_get_crtc_for_pipe(dev_priv, |
| pipe); |
| int position; |
| int vbl_start, vbl_end, hsync_start, htotal, vtotal; |
| unsigned long irqflags; |
| |
| if (WARN_ON(!mode->crtc_clock)) { |
| DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return false; |
| } |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vtotal = mode->crtc_vtotal; |
| vbl_start = mode->crtc_vblank_start; |
| vbl_end = mode->crtc_vblank_end; |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| vbl_end /= 2; |
| vtotal /= 2; |
| } |
| |
| /* |
| * Lock uncore.lock, as we will do multiple timing critical raw |
| * register reads, potentially with preemption disabled, so the |
| * following code must not block on uncore.lock. |
| */ |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| |
| /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| /* Get optional system timestamp before query. */ |
| if (stime) |
| *stime = ktime_get(); |
| |
| if (IS_GEN2(dev_priv) || IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5) { |
| /* No obvious pixelcount register. Only query vertical |
| * scanout position from Display scan line register. |
| */ |
| position = __intel_get_crtc_scanline(intel_crtc); |
| } else { |
| /* Have access to pixelcount since start of frame. |
| * We can split this into vertical and horizontal |
| * scanout position. |
| */ |
| position = (I915_READ_FW(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT; |
| |
| /* convert to pixel counts */ |
| vbl_start *= htotal; |
| vbl_end *= htotal; |
| vtotal *= htotal; |
| |
| /* |
| * In interlaced modes, the pixel counter counts all pixels, |
| * so one field will have htotal more pixels. In order to avoid |
| * the reported position from jumping backwards when the pixel |
| * counter is beyond the length of the shorter field, just |
| * clamp the position the length of the shorter field. This |
| * matches how the scanline counter based position works since |
| * the scanline counter doesn't count the two half lines. |
| */ |
| if (position >= vtotal) |
| position = vtotal - 1; |
| |
| /* |
| * Start of vblank interrupt is triggered at start of hsync, |
| * just prior to the first active line of vblank. However we |
| * consider lines to start at the leading edge of horizontal |
| * active. So, should we get here before we've crossed into |
| * the horizontal active of the first line in vblank, we would |
| * not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that, |
| * always add htotal-hsync_start to the current pixel position. |
| */ |
| position = (position + htotal - hsync_start) % vtotal; |
| } |
| |
| /* Get optional system timestamp after query. */ |
| if (etime) |
| *etime = ktime_get(); |
| |
| /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| /* |
| * While in vblank, position will be negative |
| * counting up towards 0 at vbl_end. And outside |
| * vblank, position will be positive counting |
| * up since vbl_end. |
| */ |
| if (position >= vbl_start) |
| position -= vbl_end; |
| else |
| position += vtotal - vbl_end; |
| |
| if (IS_GEN2(dev_priv) || IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5) { |
| *vpos = position; |
| *hpos = 0; |
| } else { |
| *vpos = position / htotal; |
| *hpos = position - (*vpos * htotal); |
| } |
| |
| return true; |
| } |
| |
| int intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| unsigned long irqflags; |
| int position; |
| |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| position = __intel_get_crtc_scanline(crtc); |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| return position; |
| } |
| |
| static void ironlake_rps_change_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| u32 busy_up, busy_down, max_avg, min_avg; |
| u8 new_delay; |
| |
| spin_lock(&mchdev_lock); |
| |
| I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS)); |
| |
| new_delay = dev_priv->ips.cur_delay; |
| |
| I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG); |
| busy_up = I915_READ(RCPREVBSYTUPAVG); |
| busy_down = I915_READ(RCPREVBSYTDNAVG); |
| max_avg = I915_READ(RCBMAXAVG); |
| min_avg = I915_READ(RCBMINAVG); |
| |
| /* Handle RCS change request from hw */ |
| if (busy_up > max_avg) { |
| if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay) |
| new_delay = dev_priv->ips.cur_delay - 1; |
| if (new_delay < dev_priv->ips.max_delay) |
| new_delay = dev_priv->ips.max_delay; |
| } else if (busy_down < min_avg) { |
| if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay) |
| new_delay = dev_priv->ips.cur_delay + 1; |
| if (new_delay > dev_priv->ips.min_delay) |
| new_delay = dev_priv->ips.min_delay; |
| } |
| |
| if (ironlake_set_drps(dev_priv, new_delay)) |
| dev_priv->ips.cur_delay = new_delay; |
| |
| spin_unlock(&mchdev_lock); |
| |
| return; |
| } |
| |
| static void notify_ring(struct intel_engine_cs *engine) |
| { |
| const u32 seqno = intel_engine_get_seqno(engine); |
| struct i915_request *rq = NULL; |
| struct task_struct *tsk = NULL; |
| struct intel_wait *wait; |
| |
| if (unlikely(!engine->breadcrumbs.irq_armed)) |
| return; |
| |
| rcu_read_lock(); |
| |
| spin_lock(&engine->breadcrumbs.irq_lock); |
| wait = engine->breadcrumbs.irq_wait; |
| if (wait) { |
| /* |
| * We use a callback from the dma-fence to submit |
| * requests after waiting on our own requests. To |
| * ensure minimum delay in queuing the next request to |
| * hardware, signal the fence now rather than wait for |
| * the signaler to be woken up. We still wake up the |
| * waiter in order to handle the irq-seqno coherency |
| * issues (we may receive the interrupt before the |
| * seqno is written, see __i915_request_irq_complete()) |
| * and to handle coalescing of multiple seqno updates |
| * and many waiters. |
| */ |
| if (i915_seqno_passed(seqno, wait->seqno)) { |
| struct i915_request *waiter = wait->request; |
| |
| if (waiter && |
| !test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, |
| &waiter->fence.flags) && |
| intel_wait_check_request(wait, waiter)) |
| rq = i915_request_get(waiter); |
| |
| tsk = wait->tsk; |
| } else { |
| if (engine->irq_seqno_barrier && |
| i915_seqno_passed(seqno, wait->seqno - 1)) { |
| set_bit(ENGINE_IRQ_BREADCRUMB, |
| &engine->irq_posted); |
| tsk = wait->tsk; |
| } |
| } |
| |
| engine->breadcrumbs.irq_count++; |
| } else { |
| if (engine->breadcrumbs.irq_armed) |
| __intel_engine_disarm_breadcrumbs(engine); |
| } |
| spin_unlock(&engine->breadcrumbs.irq_lock); |
| |
| if (rq) { |
| spin_lock(&rq->lock); |
| dma_fence_signal_locked(&rq->fence); |
| GEM_BUG_ON(!i915_request_completed(rq)); |
| spin_unlock(&rq->lock); |
| |
| i915_request_put(rq); |
| } |
| |
| if (tsk && tsk->state & TASK_NORMAL) |
| wake_up_process(tsk); |
| |
| rcu_read_unlock(); |
| |
| trace_intel_engine_notify(engine, wait); |
| } |
| |
| static void vlv_c0_read(struct drm_i915_private *dev_priv, |
| struct intel_rps_ei *ei) |
| { |
| ei->ktime = ktime_get_raw(); |
| ei->render_c0 = I915_READ(VLV_RENDER_C0_COUNT); |
| ei->media_c0 = I915_READ(VLV_MEDIA_C0_COUNT); |
| } |
| |
| void gen6_rps_reset_ei(struct drm_i915_private *dev_priv) |
| { |
| memset(&dev_priv->gt_pm.rps.ei, 0, sizeof(dev_priv->gt_pm.rps.ei)); |
| } |
| |
| static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir) |
| { |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| const struct intel_rps_ei *prev = &rps->ei; |
| struct intel_rps_ei now; |
| u32 events = 0; |
| |
| if ((pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) == 0) |
| return 0; |
| |
| vlv_c0_read(dev_priv, &now); |
| |
| if (prev->ktime) { |
| u64 time, c0; |
| u32 render, media; |
| |
| time = ktime_us_delta(now.ktime, prev->ktime); |
| |
| time *= dev_priv->czclk_freq; |
| |
| /* Workload can be split between render + media, |
| * e.g. SwapBuffers being blitted in X after being rendered in |
| * mesa. To account for this we need to combine both engines |
| * into our activity counter. |
| */ |
| render = now.render_c0 - prev->render_c0; |
| media = now.media_c0 - prev->media_c0; |
| c0 = max(render, media); |
| c0 *= 1000 * 100 << 8; /* to usecs and scale to threshold% */ |
| |
| if (c0 > time * rps->power.up_threshold) |
| events = GEN6_PM_RP_UP_THRESHOLD; |
| else if (c0 < time * rps->power.down_threshold) |
| events = GEN6_PM_RP_DOWN_THRESHOLD; |
| } |
| |
| rps->ei = now; |
| return events; |
| } |
| |
| static void gen6_pm_rps_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, gt_pm.rps.work); |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| bool client_boost = false; |
| int new_delay, adj, min, max; |
| u32 pm_iir = 0; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (rps->interrupts_enabled) { |
| pm_iir = fetch_and_zero(&rps->pm_iir); |
| client_boost = atomic_read(&rps->num_waiters); |
| } |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* Make sure we didn't queue anything we're not going to process. */ |
| WARN_ON(pm_iir & ~dev_priv->pm_rps_events); |
| if ((pm_iir & dev_priv->pm_rps_events) == 0 && !client_boost) |
| goto out; |
| |
| mutex_lock(&dev_priv->pcu_lock); |
| |
| pm_iir |= vlv_wa_c0_ei(dev_priv, pm_iir); |
| |
| adj = rps->last_adj; |
| new_delay = rps->cur_freq; |
| min = rps->min_freq_softlimit; |
| max = rps->max_freq_softlimit; |
| if (client_boost) |
| max = rps->max_freq; |
| if (client_boost && new_delay < rps->boost_freq) { |
| new_delay = rps->boost_freq; |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) { |
| if (adj > 0) |
| adj *= 2; |
| else /* CHV needs even encode values */ |
| adj = IS_CHERRYVIEW(dev_priv) ? 2 : 1; |
| |
| if (new_delay >= rps->max_freq_softlimit) |
| adj = 0; |
| } else if (client_boost) { |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_DOWN_TIMEOUT) { |
| if (rps->cur_freq > rps->efficient_freq) |
| new_delay = rps->efficient_freq; |
| else if (rps->cur_freq > rps->min_freq_softlimit) |
| new_delay = rps->min_freq_softlimit; |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_DOWN_THRESHOLD) { |
| if (adj < 0) |
| adj *= 2; |
| else /* CHV needs even encode values */ |
| adj = IS_CHERRYVIEW(dev_priv) ? -2 : -1; |
| |
| if (new_delay <= rps->min_freq_softlimit) |
| adj = 0; |
| } else { /* unknown event */ |
| adj = 0; |
| } |
| |
| rps->last_adj = adj; |
| |
| /* sysfs frequency interfaces may have snuck in while servicing the |
| * interrupt |
| */ |
| new_delay += adj; |
| new_delay = clamp_t(int, new_delay, min, max); |
| |
| if (intel_set_rps(dev_priv, new_delay)) { |
| DRM_DEBUG_DRIVER("Failed to set new GPU frequency\n"); |
| rps->last_adj = 0; |
| } |
| |
| mutex_unlock(&dev_priv->pcu_lock); |
| |
| out: |
| /* Make sure not to corrupt PMIMR state used by ringbuffer on GEN6 */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (rps->interrupts_enabled) |
| gen6_unmask_pm_irq(dev_priv, dev_priv->pm_rps_events); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| |
| /** |
| * ivybridge_parity_work - Workqueue called when a parity error interrupt |
| * occurred. |
| * @work: workqueue struct |
| * |
| * Doesn't actually do anything except notify userspace. As a consequence of |
| * this event, userspace should try to remap the bad rows since statistically |
| * it is likely the same row is more likely to go bad again. |
| */ |
| static void ivybridge_parity_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), l3_parity.error_work); |
| u32 error_status, row, bank, subbank; |
| char *parity_event[6]; |
| uint32_t misccpctl; |
| uint8_t slice = 0; |
| |
| /* We must turn off DOP level clock gating to access the L3 registers. |
| * In order to prevent a get/put style interface, acquire struct mutex |
| * any time we access those registers. |
| */ |
| mutex_lock(&dev_priv->drm.struct_mutex); |
| |
| /* If we've screwed up tracking, just let the interrupt fire again */ |
| if (WARN_ON(!dev_priv->l3_parity.which_slice)) |
| goto out; |
| |
| misccpctl = I915_READ(GEN7_MISCCPCTL); |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE); |
| POSTING_READ(GEN7_MISCCPCTL); |
| |
| while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) { |
| i915_reg_t reg; |
| |
| slice--; |
| if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv))) |
| break; |
| |
| dev_priv->l3_parity.which_slice &= ~(1<<slice); |
| |
| reg = GEN7_L3CDERRST1(slice); |
| |
| error_status = I915_READ(reg); |
| row = GEN7_PARITY_ERROR_ROW(error_status); |
| bank = GEN7_PARITY_ERROR_BANK(error_status); |
| subbank = GEN7_PARITY_ERROR_SUBBANK(error_status); |
| |
| I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE); |
| POSTING_READ(reg); |
| |
| parity_event[0] = I915_L3_PARITY_UEVENT "=1"; |
| parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row); |
| parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank); |
| parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank); |
| parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice); |
| parity_event[5] = NULL; |
| |
| kobject_uevent_env(&dev_priv->drm.primary->kdev->kobj, |
| KOBJ_CHANGE, parity_event); |
| |
| DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n", |
| slice, row, bank, subbank); |
| |
| kfree(parity_event[4]); |
| kfree(parity_event[3]); |
| kfree(parity_event[2]); |
| kfree(parity_event[1]); |
| } |
| |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl); |
| |
| out: |
| WARN_ON(dev_priv->l3_parity.which_slice); |
| spin_lock_irq(&dev_priv->irq_lock); |
| gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv)); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| mutex_unlock(&dev_priv->drm.struct_mutex); |
| } |
| |
| static void ivybridge_parity_error_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir) |
| { |
| if (!HAS_L3_DPF(dev_priv)) |
| return; |
| |
| spin_lock(&dev_priv->irq_lock); |
| gen5_disable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv)); |
| spin_unlock(&dev_priv->irq_lock); |
| |
| iir &= GT_PARITY_ERROR(dev_priv); |
| if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1) |
| dev_priv->l3_parity.which_slice |= 1 << 1; |
| |
| if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT) |
| dev_priv->l3_parity.which_slice |= 1 << 0; |
| |
| queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work); |
| } |
| |
| static void ilk_gt_irq_handler(struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| if (gt_iir & GT_RENDER_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[RCS]); |
| if (gt_iir & ILK_BSD_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[VCS]); |
| } |
| |
| static void snb_gt_irq_handler(struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| if (gt_iir & GT_RENDER_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[RCS]); |
| if (gt_iir & GT_BSD_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[VCS]); |
| if (gt_iir & GT_BLT_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[BCS]); |
| |
| if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT | |
| GT_BSD_CS_ERROR_INTERRUPT | |
| GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) |
| DRM_DEBUG("Command parser error, gt_iir 0x%08x\n", gt_iir); |
| |
| if (gt_iir & GT_PARITY_ERROR(dev_priv)) |
| ivybridge_parity_error_irq_handler(dev_priv, gt_iir); |
| } |
| |
| static void |
| gen8_cs_irq_handler(struct intel_engine_cs *engine, u32 iir) |
| { |
| bool tasklet = false; |
| |
| if (iir & GT_CONTEXT_SWITCH_INTERRUPT) |
| tasklet = true; |
| |
| if (iir & GT_RENDER_USER_INTERRUPT) { |
| notify_ring(engine); |
| tasklet |= USES_GUC_SUBMISSION(engine->i915); |
| } |
| |
| if (tasklet) |
| tasklet_hi_schedule(&engine->execlists.tasklet); |
| } |
| |
| static void gen8_gt_irq_ack(struct drm_i915_private *i915, |
| u32 master_ctl, u32 gt_iir[4]) |
| { |
| void __iomem * const regs = i915->regs; |
| |
| #define GEN8_GT_IRQS (GEN8_GT_RCS_IRQ | \ |
| GEN8_GT_BCS_IRQ | \ |
| GEN8_GT_VCS1_IRQ | \ |
| GEN8_GT_VCS2_IRQ | \ |
| GEN8_GT_VECS_IRQ | \ |
| GEN8_GT_PM_IRQ | \ |
| GEN8_GT_GUC_IRQ) |
| |
| if (master_ctl & (GEN8_GT_RCS_IRQ | GEN8_GT_BCS_IRQ)) { |
| gt_iir[0] = raw_reg_read(regs, GEN8_GT_IIR(0)); |
| if (likely(gt_iir[0])) |
| raw_reg_write(regs, GEN8_GT_IIR(0), gt_iir[0]); |
| } |
| |
| if (master_ctl & (GEN8_GT_VCS1_IRQ | GEN8_GT_VCS2_IRQ)) { |
| gt_iir[1] = raw_reg_read(regs, GEN8_GT_IIR(1)); |
| if (likely(gt_iir[1])) |
| raw_reg_write(regs, GEN8_GT_IIR(1), gt_iir[1]); |
| } |
| |
| if (master_ctl & (GEN8_GT_PM_IRQ | GEN8_GT_GUC_IRQ)) { |
| gt_iir[2] = raw_reg_read(regs, GEN8_GT_IIR(2)); |
| if (likely(gt_iir[2])) |
| raw_reg_write(regs, GEN8_GT_IIR(2), gt_iir[2]); |
| } |
| |
| if (master_ctl & GEN8_GT_VECS_IRQ) { |
| gt_iir[3] = raw_reg_read(regs, GEN8_GT_IIR(3)); |
| if (likely(gt_iir[3])) |
| raw_reg_write(regs, GEN8_GT_IIR(3), gt_iir[3]); |
| } |
| } |
| |
| static void gen8_gt_irq_handler(struct drm_i915_private *i915, |
| u32 master_ctl, u32 gt_iir[4]) |
| { |
| if (master_ctl & (GEN8_GT_RCS_IRQ | GEN8_GT_BCS_IRQ)) { |
| gen8_cs_irq_handler(i915->engine[RCS], |
| gt_iir[0] >> GEN8_RCS_IRQ_SHIFT); |
| gen8_cs_irq_handler(i915->engine[BCS], |
| gt_iir[0] >> GEN8_BCS_IRQ_SHIFT); |
| } |
| |
| if (master_ctl & (GEN8_GT_VCS1_IRQ | GEN8_GT_VCS2_IRQ)) { |
| gen8_cs_irq_handler(i915->engine[VCS], |
| gt_iir[1] >> GEN8_VCS1_IRQ_SHIFT); |
| gen8_cs_irq_handler(i915->engine[VCS2], |
| gt_iir[1] >> GEN8_VCS2_IRQ_SHIFT); |
| } |
| |
| if (master_ctl & GEN8_GT_VECS_IRQ) { |
| gen8_cs_irq_handler(i915->engine[VECS], |
| gt_iir[3] >> GEN8_VECS_IRQ_SHIFT); |
| } |
| |
| if (master_ctl & (GEN8_GT_PM_IRQ | GEN8_GT_GUC_IRQ)) { |
| gen6_rps_irq_handler(i915, gt_iir[2]); |
| gen9_guc_irq_handler(i915, gt_iir[2]); |
| } |
| } |
| |
| static bool gen11_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_C: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_D: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_E: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_F: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC4); |
| default: |
| return false; |
| } |
| } |
| |
| static bool bxt_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool icp_ddi_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & ICP_DDIA_HPD_LONG_DETECT; |
| case HPD_PORT_B: |
| return val & ICP_DDIB_HPD_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool icp_tc_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_C: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_D: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_E: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_F: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC4); |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug2_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_E: |
| return val & PORTE_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ilk_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & DIGITAL_PORTA_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool pch_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool i9xx_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_INT_LONG_PULSE; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_INT_LONG_PULSE; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_INT_LONG_PULSE; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * Get a bit mask of pins that have triggered, and which ones may be long. |
| * This can be called multiple times with the same masks to accumulate |
| * hotplug detection results from several registers. |
| * |
| * Note that the caller is expected to zero out the masks initially. |
| */ |
| static void intel_get_hpd_pins(struct drm_i915_private *dev_priv, |
| u32 *pin_mask, u32 *long_mask, |
| u32 hotplug_trigger, u32 dig_hotplug_reg, |
| const u32 hpd[HPD_NUM_PINS], |
| bool long_pulse_detect(enum hpd_pin pin, u32 val)) |
| { |
| enum hpd_pin pin; |
| |
| for_each_hpd_pin(pin) { |
| if ((hpd[pin] & hotplug_trigger) == 0) |
| continue; |
| |
| *pin_mask |= BIT(pin); |
| |
| if (long_pulse_detect(pin, dig_hotplug_reg)) |
| *long_mask |= BIT(pin); |
| } |
| |
| DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, dig 0x%08x, pins 0x%08x, long 0x%08x\n", |
| hotplug_trigger, dig_hotplug_reg, *pin_mask, *long_mask); |
| |
| } |
| |
| static void gmbus_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| static void dp_aux_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| static void display_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| uint32_t crc0, uint32_t crc1, |
| uint32_t crc2, uint32_t crc3, |
| uint32_t crc4) |
| { |
| struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe]; |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| uint32_t crcs[5]; |
| |
| spin_lock(&pipe_crc->lock); |
| /* |
| * For some not yet identified reason, the first CRC is |
| * bonkers. So let's just wait for the next vblank and read |
| * out the buggy result. |
| * |
| * On GEN8+ sometimes the second CRC is bonkers as well, so |
| * don't trust that one either. |
| */ |
| if (pipe_crc->skipped <= 0 || |
| (INTEL_GEN(dev_priv) >= 8 && pipe_crc->skipped == 1)) { |
| pipe_crc->skipped++; |
| spin_unlock(&pipe_crc->lock); |
| return; |
| } |
| spin_unlock(&pipe_crc->lock); |
| |
| crcs[0] = crc0; |
| crcs[1] = crc1; |
| crcs[2] = crc2; |
| crcs[3] = crc3; |
| crcs[4] = crc4; |
| drm_crtc_add_crc_entry(&crtc->base, true, |
| drm_crtc_accurate_vblank_count(&crtc->base), |
| crcs); |
| } |
| #else |
| static inline void |
| display_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| uint32_t crc0, uint32_t crc1, |
| uint32_t crc2, uint32_t crc3, |
| uint32_t crc4) {} |
| #endif |
| |
| |
| static void hsw_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| 0, 0, 0, 0); |
| } |
| |
| static void ivb_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_2_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_3_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_4_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_5_IVB(pipe))); |
| } |
| |
| static void i9xx_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| uint32_t res1, res2; |
| |
| if (INTEL_GEN(dev_priv) >= 3) |
| res1 = I915_READ(PIPE_CRC_RES_RES1_I915(pipe)); |
| else |
| res1 = 0; |
| |
| if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) |
| res2 = I915_READ(PIPE_CRC_RES_RES2_G4X(pipe)); |
| else |
| res2 = 0; |
| |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_RED(pipe)), |
| I915_READ(PIPE_CRC_RES_GREEN(pipe)), |
| I915_READ(PIPE_CRC_RES_BLUE(pipe)), |
| res1, res2); |
| } |
| |
| /* The RPS events need forcewake, so we add them to a work queue and mask their |
| * IMR bits until the work is done. Other interrupts can be processed without |
| * the work queue. */ |
| static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir) |
| { |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| |
| if (pm_iir & dev_priv->pm_rps_events) { |
| spin_lock(&dev_priv->irq_lock); |
| gen6_mask_pm_irq(dev_priv, pm_iir & dev_priv->pm_rps_events); |
| if (rps->interrupts_enabled) { |
| rps->pm_iir |= pm_iir & dev_priv->pm_rps_events; |
| schedule_work(&rps->work); |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 8) |
| return; |
| |
| if (HAS_VEBOX(dev_priv)) { |
| if (pm_iir & PM_VEBOX_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[VECS]); |
| |
| if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) |
| DRM_DEBUG("Command parser error, pm_iir 0x%08x\n", pm_iir); |
| } |
| } |
| |
| static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv, u32 gt_iir) |
| { |
| if (gt_iir & GEN9_GUC_TO_HOST_INT_EVENT) |
| intel_guc_to_host_event_handler(&dev_priv->guc); |
| } |
| |
| static void i9xx_pipestat_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(PIPESTAT(pipe), |
| PIPESTAT_INT_STATUS_MASK | |
| PIPE_FIFO_UNDERRUN_STATUS); |
| |
| dev_priv->pipestat_irq_mask[pipe] = 0; |
| } |
| } |
| |
| static void i9xx_pipestat_irq_ack(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| int pipe; |
| |
| spin_lock(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) { |
| spin_unlock(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg; |
| u32 status_mask, enable_mask, iir_bit = 0; |
| |
| /* |
| * PIPESTAT bits get signalled even when the interrupt is |
| * disabled with the mask bits, and some of the status bits do |
| * not generate interrupts at all (like the underrun bit). Hence |
| * we need to be careful that we only handle what we want to |
| * handle. |
| */ |
| |
| /* fifo underruns are filterered in the underrun handler. */ |
| status_mask = PIPE_FIFO_UNDERRUN_STATUS; |
| |
| switch (pipe) { |
| case PIPE_A: |
| iir_bit = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; |
| break; |
| case PIPE_B: |
| iir_bit = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| break; |
| case PIPE_C: |
| iir_bit = I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; |
| break; |
| } |
| if (iir & iir_bit) |
| status_mask |= dev_priv->pipestat_irq_mask[pipe]; |
| |
| if (!status_mask) |
| continue; |
| |
| reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg) & status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| * |
| * Toggle the enable bits to make sure we get an |
| * edge in the ISR pipe event bit if we don't clear |
| * all the enabled status bits. Otherwise the edge |
| * triggered IIR on i965/g4x wouldn't notice that |
| * an interrupt is still pending. |
| */ |
| if (pipe_stats[pipe]) { |
| I915_WRITE(reg, pipe_stats[pipe]); |
| I915_WRITE(reg, enable_mask); |
| } |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| } |
| |
| static void i8xx_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u16 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| } |
| |
| static void i915_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| bool blc_event = false; |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev_priv); |
| } |
| |
| static void i965_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| bool blc_event = false; |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev_priv); |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_status = 0, hotplug_status_mask; |
| int i; |
| |
| if (IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| hotplug_status_mask = HOTPLUG_INT_STATUS_G4X | |
| DP_AUX_CHANNEL_MASK_INT_STATUS_G4X; |
| else |
| hotplug_status_mask = HOTPLUG_INT_STATUS_I915; |
| |
| /* |
| * We absolutely have to clear all the pending interrupt |
| * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port |
| * interrupt bit won't have an edge, and the i965/g4x |
| * edge triggered IIR will not notice that an interrupt |
| * is still pending. We can't use PORT_HOTPLUG_EN to |
| * guarantee the edge as the act of toggling the enable |
| * bits can itself generate a new hotplug interrupt :( |
| */ |
| for (i = 0; i < 10; i++) { |
| u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask; |
| |
| if (tmp == 0) |
| return hotplug_status; |
| |
| hotplug_status |= tmp; |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| } |
| |
| WARN_ONCE(1, |
| "PORT_HOTPLUG_STAT did not clear (0x%08x)\n", |
| I915_READ(PORT_HOTPLUG_STAT)); |
| |
| return hotplug_status; |
| } |
| |
| static void i9xx_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_status) |
| { |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) { |
| u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X; |
| |
| if (hotplug_trigger) { |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, hotplug_trigger, |
| hpd_status_g4x, |
| i9xx_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| if (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X) |
| dp_aux_irq_handler(dev_priv); |
| } else { |
| u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; |
| |
| if (hotplug_trigger) { |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, hotplug_trigger, |
| hpd_status_i915, |
| i9xx_port_hotplug_long_detect); |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| } |
| } |
| |
| static irqreturn_t valleyview_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 iir, gt_iir, pm_iir; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 ier = 0; |
| |
| gt_iir = I915_READ(GTIIR); |
| pm_iir = I915_READ(GEN6_PMIIR); |
| iir = I915_READ(VLV_IIR); |
| |
| if (gt_iir == 0 && pm_iir == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * (((GT_IIR & GT_IER) || (GEN6_PMIIR & GEN6_PMIER)) && |
| * (VLV_MASTER_IER & MASTER_INTERRUPT_ENABLE))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear MASTER_INTERRUPT_ENABLE and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR, GT_IIR, GEN6_PMIIR |
| * bits this time around. |
| */ |
| I915_WRITE(VLV_MASTER_IER, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| if (gt_iir) |
| I915_WRITE(GTIIR, gt_iir); |
| if (pm_iir) |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & (I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT)) |
| intel_lpe_audio_irq_handler(dev_priv); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| |
| if (gt_iir) |
| snb_gt_irq_handler(dev_priv, gt_iir); |
| if (pm_iir) |
| gen6_rps_irq_handler(dev_priv, pm_iir); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev_priv, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static irqreturn_t cherryview_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 master_ctl, iir; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 gt_iir[4]; |
| u32 ier = 0; |
| |
| master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL; |
| iir = I915_READ(VLV_IIR); |
| |
| if (master_ctl == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * ((GEN8_MASTER_IRQ & ~GEN8_MASTER_IRQ_CONTROL) && |
| * (GEN8_MASTER_IRQ & GEN8_MASTER_IRQ_CONTROL))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear GEN8_MASTER_IRQ_CONTROL and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR and GEN8_MASTER_IRQ_CONTROL |
| * bits this time around. |
| */ |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| gen8_gt_irq_ack(dev_priv, master_ctl, gt_iir); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & (I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT | |
| I915_LPE_PIPE_C_INTERRUPT)) |
| intel_lpe_audio_irq_handler(dev_priv); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| |
| gen8_gt_irq_handler(dev_priv, master_ctl, gt_iir); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev_priv, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void ibx_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| /* |
| * Somehow the PCH doesn't seem to really ack the interrupt to the CPU |
| * unless we touch the hotplug register, even if hotplug_trigger is |
| * zero. Not acking leads to "The master control interrupt lied (SDE)!" |
| * errors. |
| */ |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| if (!hotplug_trigger) { |
| u32 mask = PORTA_HOTPLUG_STATUS_MASK | |
| PORTD_HOTPLUG_STATUS_MASK | |
| PORTC_HOTPLUG_STATUS_MASK | |
| PORTB_HOTPLUG_STATUS_MASK; |
| dig_hotplug_reg &= ~mask; |
| } |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| if (!hotplug_trigger) |
| return; |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| pch_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void ibx_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| int pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK; |
| |
| ibx_hpd_irq_handler(dev_priv, hotplug_trigger, hpd_ibx); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >> |
| SDE_AUDIO_POWER_SHIFT); |
| DRM_DEBUG_DRIVER("PCH audio power change on port %d\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_GMBUS) |
| gmbus_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_AUDIO_HDCP_MASK) |
| DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_TRANS_MASK) |
| DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n"); |
| |
| if (pch_iir & SDE_POISON) |
| DRM_ERROR("PCH poison interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK) |
| for_each_pipe(dev_priv, pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n"); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n"); |
| |
| if (pch_iir & SDE_TRANSA_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, PIPE_A); |
| |
| if (pch_iir & SDE_TRANSB_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, PIPE_B); |
| } |
| |
| static void ivb_err_int_handler(struct drm_i915_private *dev_priv) |
| { |
| u32 err_int = I915_READ(GEN7_ERR_INT); |
| enum pipe pipe; |
| |
| if (err_int & ERR_INT_POISON) |
| DRM_ERROR("Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (err_int & ERR_INT_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (err_int & ERR_INT_PIPE_CRC_DONE(pipe)) { |
| if (IS_IVYBRIDGE(dev_priv)) |
| ivb_pipe_crc_irq_handler(dev_priv, pipe); |
| else |
| hsw_pipe_crc_irq_handler(dev_priv, pipe); |
| } |
| } |
| |
| I915_WRITE(GEN7_ERR_INT, err_int); |
| } |
| |
| static void cpt_serr_int_handler(struct drm_i915_private *dev_priv) |
| { |
| u32 serr_int = I915_READ(SERR_INT); |
| enum pipe pipe; |
| |
| if (serr_int & SERR_INT_POISON) |
| DRM_ERROR("PCH poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (serr_int & SERR_INT_TRANS_FIFO_UNDERRUN(pipe)) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| I915_WRITE(SERR_INT, serr_int); |
| } |
| |
| static void cpt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| int pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT; |
| |
| ibx_hpd_irq_handler(dev_priv, hotplug_trigger, hpd_cpt); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >> |
| SDE_AUDIO_POWER_SHIFT_CPT); |
| DRM_DEBUG_DRIVER("PCH audio power change on port %c\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK_CPT) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_AUDIO_CP_REQ_CPT) |
| DRM_DEBUG_DRIVER("Audio CP request interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_CP_CHG_CPT) |
| DRM_DEBUG_DRIVER("Audio CP change interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK_CPT) |
| for_each_pipe(dev_priv, pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| |
| if (pch_iir & SDE_ERROR_CPT) |
| cpt_serr_int_handler(dev_priv); |
| } |
| |
| static void icp_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| u32 ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_ICP; |
| u32 tc_hotplug_trigger = pch_iir & SDE_TC_MASK_ICP; |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (ddi_hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_DDI); |
| I915_WRITE(SHOTPLUG_CTL_DDI, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| ddi_hotplug_trigger, |
| dig_hotplug_reg, hpd_icp, |
| icp_ddi_port_hotplug_long_detect); |
| } |
| |
| if (tc_hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_TC); |
| I915_WRITE(SHOTPLUG_CTL_TC, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| tc_hotplug_trigger, |
| dig_hotplug_reg, hpd_icp, |
| icp_tc_port_hotplug_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| |
| if (pch_iir & SDE_GMBUS_ICP) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void spt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_SPT & |
| ~SDE_PORTE_HOTPLUG_SPT; |
| u32 hotplug2_trigger = pch_iir & SDE_PORTE_HOTPLUG_SPT; |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, dig_hotplug_reg, hpd_spt, |
| spt_port_hotplug_long_detect); |
| } |
| |
| if (hotplug2_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG2); |
| I915_WRITE(PCH_PORT_HOTPLUG2, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug2_trigger, dig_hotplug_reg, hpd_spt, |
| spt_port_hotplug2_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void ilk_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| ilk_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void ilk_display_irq_handler(struct drm_i915_private *dev_priv, |
| u32 de_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev_priv, hotplug_trigger, hpd_ilk); |
| |
| if (de_iir & DE_AUX_CHANNEL_A) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (de_iir & DE_GSE) |
| intel_opregion_asle_intr(dev_priv); |
| |
| if (de_iir & DE_POISON) |
| DRM_ERROR("Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & DE_PIPE_VBLANK(pipe)) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (de_iir & DE_PIPE_CRC_DONE(pipe)) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| } |
| |
| /* check event from PCH */ |
| if (de_iir & DE_PCH_EVENT) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| cpt_irq_handler(dev_priv, pch_iir); |
| else |
| ibx_irq_handler(dev_priv, pch_iir); |
| |
| /* should clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| |
| if (IS_GEN5(dev_priv) && de_iir & DE_PCU_EVENT) |
| ironlake_rps_change_irq_handler(dev_priv); |
| } |
| |
| static void ivb_display_irq_handler(struct drm_i915_private *dev_priv, |
| u32 de_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG_IVB; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev_priv, hotplug_trigger, hpd_ivb); |
| |
| if (de_iir & DE_ERR_INT_IVB) |
| ivb_err_int_handler(dev_priv); |
| |
| if (de_iir & DE_EDP_PSR_INT_HSW) { |
| u32 psr_iir = I915_READ(EDP_PSR_IIR); |
| |
| intel_psr_irq_handler(dev_priv, psr_iir); |
| I915_WRITE(EDP_PSR_IIR, psr_iir); |
| } |
| |
| if (de_iir & DE_AUX_CHANNEL_A_IVB) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (de_iir & DE_GSE_IVB) |
| intel_opregion_asle_intr(dev_priv); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & (DE_PIPE_VBLANK_IVB(pipe))) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| } |
| |
| /* check event from PCH */ |
| if (!HAS_PCH_NOP(dev_priv) && (de_iir & DE_PCH_EVENT_IVB)) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| cpt_irq_handler(dev_priv, pch_iir); |
| |
| /* clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| } |
| |
| /* |
| * To handle irqs with the minimum potential races with fresh interrupts, we: |
| * 1 - Disable Master Interrupt Control. |
| * 2 - Find the source(s) of the interrupt. |
| * 3 - Clear the Interrupt Identity bits (IIR). |
| * 4 - Process the interrupt(s) that had bits set in the IIRs. |
| * 5 - Re-enable Master Interrupt Control. |
| */ |
| static irqreturn_t ironlake_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 de_iir, gt_iir, de_ier, sde_ier = 0; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| /* disable master interrupt before clearing iir */ |
| de_ier = I915_READ(DEIER); |
| I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); |
| |
| /* Disable south interrupts. We'll only write to SDEIIR once, so further |
| * interrupts will will be stored on its back queue, and then we'll be |
| * able to process them after we restore SDEIER (as soon as we restore |
| * it, we'll get an interrupt if SDEIIR still has something to process |
| * due to its back queue). */ |
| if (!HAS_PCH_NOP(dev_priv)) { |
| sde_ier = I915_READ(SDEIER); |
| I915_WRITE(SDEIER, 0); |
| } |
| |
| /* Find, clear, then process each source of interrupt */ |
| |
| gt_iir = I915_READ(GTIIR); |
| if (gt_iir) { |
| I915_WRITE(GTIIR, gt_iir); |
| ret = IRQ_HANDLED; |
| if (INTEL_GEN(dev_priv) >= 6) |
| snb_gt_irq_handler(dev_priv, gt_iir); |
| else |
| ilk_gt_irq_handler(dev_priv, gt_iir); |
| } |
| |
| de_iir = I915_READ(DEIIR); |
| if (de_iir) { |
| I915_WRITE(DEIIR, de_iir); |
| ret = IRQ_HANDLED; |
| if (INTEL_GEN(dev_priv) >= 7) |
| ivb_display_irq_handler(dev_priv, de_iir); |
| else |
| ilk_display_irq_handler(dev_priv, de_iir); |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 6) { |
| u32 pm_iir = I915_READ(GEN6_PMIIR); |
| if (pm_iir) { |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| ret = IRQ_HANDLED; |
| gen6_rps_irq_handler(dev_priv, pm_iir); |
| } |
| } |
| |
| I915_WRITE(DEIER, de_ier); |
| if (!HAS_PCH_NOP(dev_priv)) |
| I915_WRITE(SDEIER, sde_ier); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void bxt_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| bxt_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void gen11_hpd_irq_handler(struct drm_i915_private *dev_priv, u32 iir) |
| { |
| u32 pin_mask = 0, long_mask = 0; |
| u32 trigger_tc = iir & GEN11_DE_TC_HOTPLUG_MASK; |
| u32 trigger_tbt = iir & GEN11_DE_TBT_HOTPLUG_MASK; |
| |
| if (trigger_tc) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(GEN11_TC_HOTPLUG_CTL); |
| I915_WRITE(GEN11_TC_HOTPLUG_CTL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, trigger_tc, |
| dig_hotplug_reg, hpd_gen11, |
| gen11_port_hotplug_long_detect); |
| } |
| |
| if (trigger_tbt) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(GEN11_TBT_HOTPLUG_CTL); |
| I915_WRITE(GEN11_TBT_HOTPLUG_CTL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, trigger_tbt, |
| dig_hotplug_reg, hpd_gen11, |
| gen11_port_hotplug_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| else |
| DRM_ERROR("Unexpected DE HPD interrupt 0x%08x\n", iir); |
| } |
| |
| static irqreturn_t |
| gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| u32 iir; |
| enum pipe pipe; |
| |
| if (master_ctl & GEN8_DE_MISC_IRQ) { |
| iir = I915_READ(GEN8_DE_MISC_IIR); |
| if (iir) { |
| bool found = false; |
| |
| I915_WRITE(GEN8_DE_MISC_IIR, iir); |
| ret = IRQ_HANDLED; |
| |
| if (iir & GEN8_DE_MISC_GSE) { |
| intel_opregion_asle_intr(dev_priv); |
| found = true; |
| } |
| |
| if (iir & GEN8_DE_EDP_PSR) { |
| u32 psr_iir = I915_READ(EDP_PSR_IIR); |
| |
| intel_psr_irq_handler(dev_priv, psr_iir); |
| I915_WRITE(EDP_PSR_IIR, psr_iir); |
| found = true; |
| } |
| |
| if (!found) |
| DRM_ERROR("Unexpected DE Misc interrupt\n"); |
| } |
| else |
| DRM_ERROR("The master control interrupt lied (DE MISC)!\n"); |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 11 && (master_ctl & GEN11_DE_HPD_IRQ)) { |
| iir = I915_READ(GEN11_DE_HPD_IIR); |
| if (iir) { |
| I915_WRITE(GEN11_DE_HPD_IIR, iir); |
| ret = IRQ_HANDLED; |
| gen11_hpd_irq_handler(dev_priv, iir); |
| } else { |
| DRM_ERROR("The master control interrupt lied, (DE HPD)!\n"); |
| } |
| } |
| |
| if (master_ctl & GEN8_DE_PORT_IRQ) { |
| iir = I915_READ(GEN8_DE_PORT_IIR); |
| if (iir) { |
| u32 tmp_mask; |
| bool found = false; |
| |
| I915_WRITE(GEN8_DE_PORT_IIR, iir); |
| ret = IRQ_HANDLED; |
| |
| tmp_mask = GEN8_AUX_CHANNEL_A; |
| if (INTEL_GEN(dev_priv) >= 9) |
| tmp_mask |= GEN9_AUX_CHANNEL_B | |
| GEN9_AUX_CHANNEL_C | |
| GEN9_AUX_CHANNEL_D; |
| |
| if (INTEL_GEN(dev_priv) >= 11) |
| tmp_mask |= ICL_AUX_CHANNEL_E; |
| |
| if (IS_CNL_WITH_PORT_F(dev_priv) || |
| INTEL_GEN(dev_priv) >= 11) |
| tmp_mask |= CNL_AUX_CHANNEL_F; |
| |
| if (iir & tmp_mask) { |
| dp_aux_irq_handler(dev_priv); |
| found = true; |
| } |
| |
| if (IS_GEN9_LP(dev_priv)) { |
| tmp_mask = iir & BXT_DE_PORT_HOTPLUG_MASK; |
| if (tmp_mask) { |
| bxt_hpd_irq_handler(dev_priv, tmp_mask, |
| hpd_bxt); |
| found = true; |
| } |
| } else if (IS_BROADWELL(dev_priv)) { |
| tmp_mask = iir & GEN8_PORT_DP_A_HOTPLUG; |
| if (tmp_mask) { |
| ilk_hpd_irq_handler(dev_priv, |
| tmp_mask, hpd_bdw); |
| found = true; |
| } |
| } |
| |
| if (IS_GEN9_LP(dev_priv) && (iir & BXT_DE_PORT_GMBUS)) { |
| gmbus_irq_handler(dev_priv); |
| found = true; |
| } |
| |
| if (!found) |
| DRM_ERROR("Unexpected DE Port interrupt\n"); |
| } |
| else |
| DRM_ERROR("The master control interrupt lied (DE PORT)!\n"); |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| u32 fault_errors; |
| |
| if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe))) |
| continue; |
| |
| iir = I915_READ(GEN8_DE_PIPE_IIR(pipe)); |
| if (!iir) { |
| DRM_ERROR("The master control interrupt lied (DE PIPE)!\n"); |
| continue; |
| } |
| |
| ret = IRQ_HANDLED; |
| I915_WRITE(GEN8_DE_PIPE_IIR(pipe), iir); |
| |
| if (iir & GEN8_PIPE_VBLANK) |
| drm_handle_vblank(&dev_priv->drm, pipe); |
| |
| if (iir & GEN8_PIPE_CDCLK_CRC_DONE) |
| hsw_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (iir & GEN8_PIPE_FIFO_UNDERRUN) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| fault_errors = iir; |
| if (INTEL_GEN(dev_priv) >= 9) |
| fault_errors &= GEN9_DE_PIPE_IRQ_FAULT_ERRORS; |
| else |
| fault_errors &= GEN8_DE_PIPE_IRQ_FAULT_ERRORS; |
| |
| if (fault_errors) |
| DRM_ERROR("Fault errors on pipe %c: 0x%08x\n", |
| pipe_name(pipe), |
| fault_errors); |
| } |
| |
| if (HAS_PCH_SPLIT(dev_priv) && !HAS_PCH_NOP(dev_priv) && |
| master_ctl & GEN8_DE_PCH_IRQ) { |
| /* |
| * FIXME(BDW): Assume for now that the new interrupt handling |
| * scheme also closed the SDE interrupt handling race we've seen |
| * on older pch-split platforms. But this needs testing. |
| */ |
| iir = I915_READ(SDEIIR); |
| if (iir) { |
| I915_WRITE(SDEIIR, iir); |
| ret = IRQ_HANDLED; |
| |
| if (HAS_PCH_ICP(dev_priv)) |
| icp_irq_handler(dev_priv, iir); |
| else if (HAS_PCH_SPT(dev_priv) || |
| HAS_PCH_KBP(dev_priv) || |
| HAS_PCH_CNP(dev_priv)) |
| spt_irq_handler(dev_priv, iir); |
| else |
| cpt_irq_handler(dev_priv, iir); |
| } else { |
| /* |
| * Like on previous PCH there seems to be something |
| * fishy going on with forwarding PCH interrupts. |
| */ |
| DRM_DEBUG_DRIVER("The master control interrupt lied (SDE)!\n"); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t gen8_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = to_i915(arg); |
| u32 master_ctl; |
| u32 gt_iir[4]; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| master_ctl = I915_READ_FW(GEN8_MASTER_IRQ); |
| master_ctl &= ~GEN8_MASTER_IRQ_CONTROL; |
| if (!master_ctl) |
| return IRQ_NONE; |
| |
| I915_WRITE_FW(GEN8_MASTER_IRQ, 0); |
| |
| /* Find, clear, then process each source of interrupt */ |
| gen8_gt_irq_ack(dev_priv, master_ctl, gt_iir); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| if (master_ctl & ~GEN8_GT_IRQS) { |
| disable_rpm_wakeref_asserts(dev_priv); |
| gen8_de_irq_handler(dev_priv, master_ctl); |
| enable_rpm_wakeref_asserts(dev_priv); |
| } |
| |
| I915_WRITE_FW(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| |
| gen8_gt_irq_handler(dev_priv, master_ctl, gt_iir); |
| |
| return IRQ_HANDLED; |
| } |
| |
| struct wedge_me { |
| struct delayed_work work; |
| struct drm_i915_private *i915; |
| const char *name; |
| }; |
| |
| static void wedge_me(struct work_struct *work) |
| { |
| struct wedge_me *w = container_of(work, typeof(*w), work.work); |
| |
| dev_err(w->i915->drm.dev, |
| "%s timed out, cancelling all in-flight rendering.\n", |
| w->name); |
| i915_gem_set_wedged(w->i915); |
| } |
| |
| static void __init_wedge(struct wedge_me *w, |
| struct drm_i915_private *i915, |
| long timeout, |
| const char *name) |
| { |
| w->i915 = i915; |
| w->name = name; |
| |
| INIT_DELAYED_WORK_ONSTACK(&w->work, wedge_me); |
| schedule_delayed_work(&w->work, timeout); |
| } |
| |
| static void __fini_wedge(struct wedge_me *w) |
| { |
| cancel_delayed_work_sync(&w->work); |
| destroy_delayed_work_on_stack(&w->work); |
| w->i915 = NULL; |
| } |
| |
| #define i915_wedge_on_timeout(W, DEV, TIMEOUT) \ |
| for (__init_wedge((W), (DEV), (TIMEOUT), __func__); \ |
| (W)->i915; \ |
| __fini_wedge((W))) |
| |
| static u32 |
| gen11_gt_engine_identity(struct drm_i915_private * const i915, |
| const unsigned int bank, const unsigned int bit) |
| { |
| void __iomem * const regs = i915->regs; |
| u32 timeout_ts; |
| u32 ident; |
| |
| lockdep_assert_held(&i915->irq_lock); |
| |
| raw_reg_write(regs, GEN11_IIR_REG_SELECTOR(bank), BIT(bit)); |
| |
| /* |
| * NB: Specs do not specify how long to spin wait, |
| * so we do ~100us as an educated guess. |
| */ |
| timeout_ts = (local_clock() >> 10) + 100; |
| do { |
| ident = raw_reg_read(regs, GEN11_INTR_IDENTITY_REG(bank)); |
| } while (!(ident & GEN11_INTR_DATA_VALID) && |
| !time_after32(local_clock() >> 10, timeout_ts)); |
| |
| if (unlikely(!(ident & GEN11_INTR_DATA_VALID))) { |
| DRM_ERROR("INTR_IDENTITY_REG%u:%u 0x%08x not valid!\n", |
| bank, bit, ident); |
| return 0; |
| } |
| |
| raw_reg_write(regs, GEN11_INTR_IDENTITY_REG(bank), |
| GEN11_INTR_DATA_VALID); |
| |
| return ident; |
| } |
| |
| static void |
| gen11_other_irq_handler(struct drm_i915_private * const i915, |
| const u8 instance, const u16 iir) |
| { |
| if (instance == OTHER_GTPM_INSTANCE) |
| return gen6_rps_irq_handler(i915, iir); |
| |
| WARN_ONCE(1, "unhandled other interrupt instance=0x%x, iir=0x%x\n", |
| instance, iir); |
| } |
| |
| static void |
| gen11_engine_irq_handler(struct drm_i915_private * const i915, |
| const u8 class, const u8 instance, const u16 iir) |
| { |
| struct intel_engine_cs *engine; |
| |
| if (instance <= MAX_ENGINE_INSTANCE) |
| engine = i915->engine_class[class][instance]; |
| else |
| engine = NULL; |
| |
| if (likely(engine)) |
| return gen8_cs_irq_handler(engine, iir); |
| |
| WARN_ONCE(1, "unhandled engine interrupt class=0x%x, instance=0x%x\n", |
| class, instance); |
| } |
| |
| static void |
| gen11_gt_identity_handler(struct drm_i915_private * const i915, |
| const u32 identity) |
| { |
| const u8 class = GEN11_INTR_ENGINE_CLASS(identity); |
| const u8 instance = GEN11_INTR_ENGINE_INSTANCE(identity); |
| const u16 intr = GEN11_INTR_ENGINE_INTR(identity); |
| |
| if (unlikely(!intr)) |
| return; |
| |
| if (class <= COPY_ENGINE_CLASS) |
| return gen11_engine_irq_handler(i915, class, instance, intr); |
| |
| if (class == OTHER_CLASS) |
| return gen11_other_irq_handler(i915, instance, intr); |
| |
| WARN_ONCE(1, "unknown interrupt class=0x%x, instance=0x%x, intr=0x%x\n", |
| class, instance, intr); |
| } |
| |
| static void |
| gen11_gt_bank_handler(struct drm_i915_private * const i915, |
| const unsigned int bank) |
| { |
| void __iomem * const regs = i915->regs; |
| unsigned long intr_dw; |
| unsigned int bit; |
| |
| lockdep_assert_held(&i915->irq_lock); |
| |
| intr_dw = raw_reg_read(regs, GEN11_GT_INTR_DW(bank)); |
| |
| if (unlikely(!intr_dw)) { |
| DRM_ERROR("GT_INTR_DW%u blank!\n", bank); |
| return; |
| } |
| |
| for_each_set_bit(bit, &intr_dw, 32) { |
| const u32 ident = gen11_gt_engine_identity(i915, |
| bank, bit); |
| |
| gen11_gt_identity_handler(i915, ident); |
| } |
| |
| /* Clear must be after shared has been served for engine */ |
| raw_reg_write(regs, GEN11_GT_INTR_DW(bank), intr_dw); |
| } |
| |
| static void |
| gen11_gt_irq_handler(struct drm_i915_private * const i915, |
| const u32 master_ctl) |
| { |
| unsigned int bank; |
| |
| spin_lock(&i915->irq_lock); |
| |
| for (bank = 0; bank < 2; bank++) { |
| if (master_ctl & GEN11_GT_DW_IRQ(bank)) |
| gen11_gt_bank_handler(i915, bank); |
| } |
| |
| spin_unlock(&i915->irq_lock); |
| } |
| |
| static u32 |
| gen11_gu_misc_irq_ack(struct drm_i915_private *dev_priv, const u32 master_ctl) |
| { |
| void __iomem * const regs = dev_priv->regs; |
| u32 iir; |
| |
| if (!(master_ctl & GEN11_GU_MISC_IRQ)) |
| return 0; |
| |
| iir = raw_reg_read(regs, GEN11_GU_MISC_IIR); |
| if (likely(iir)) |
| raw_reg_write(regs, GEN11_GU_MISC_IIR, iir); |
| |
| return iir; |
| } |
| |
| static void |
| gen11_gu_misc_irq_handler(struct drm_i915_private *dev_priv, const u32 iir) |
| { |
| if (iir & GEN11_GU_MISC_GSE) |
| intel_opregion_asle_intr(dev_priv); |
| } |
| |
| static irqreturn_t gen11_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private * const i915 = to_i915(arg); |
| void __iomem * const regs = i915->regs; |
| u32 master_ctl; |
| u32 gu_misc_iir; |
| |
| if (!intel_irqs_enabled(i915)) |
| return IRQ_NONE; |
| |
| master_ctl = raw_reg_read(regs, GEN11_GFX_MSTR_IRQ); |
| master_ctl &= ~GEN11_MASTER_IRQ; |
| if (!master_ctl) |
| return IRQ_NONE; |
| |
| /* Disable interrupts. */ |
| raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, 0); |
| |
| /* Find, clear, then process each source of interrupt. */ |
| gen11_gt_irq_handler(i915, master_ctl); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| if (master_ctl & GEN11_DISPLAY_IRQ) { |
| const u32 disp_ctl = raw_reg_read(regs, GEN11_DISPLAY_INT_CTL); |
| |
| disable_rpm_wakeref_asserts(i915); |
| /* |
| * GEN11_DISPLAY_INT_CTL has same format as GEN8_MASTER_IRQ |
| * for the display related bits. |
| */ |
| gen8_de_irq_handler(i915, disp_ctl); |
| enable_rpm_wakeref_asserts(i915); |
| } |
| |
| gu_misc_iir = gen11_gu_misc_irq_ack(i915, master_ctl); |
| |
| /* Acknowledge and enable interrupts. */ |
| raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, GEN11_MASTER_IRQ | master_ctl); |
| |
| gen11_gu_misc_irq_handler(i915, gu_misc_iir); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void i915_reset_device(struct drm_i915_private *dev_priv, |
| u32 engine_mask, |
| const char *reason) |
| { |
| struct i915_gpu_error *error = &dev_priv->gpu_error; |
| struct kobject *kobj = &dev_priv->drm.primary->kdev->kobj; |
| char *error_event[] = { I915_ERROR_UEVENT "=1", NULL }; |
| char *reset_event[] = { I915_RESET_UEVENT "=1", NULL }; |
| char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL }; |
| struct wedge_me w; |
| |
| kobject_uevent_env(kobj, KOBJ_CHANGE, error_event); |
| |
| DRM_DEBUG_DRIVER("resetting chip\n"); |
| kobject_uevent_env(kobj, KOBJ_CHANGE, reset_event); |
| |
| /* Use a watchdog to ensure that our reset completes */ |
| i915_wedge_on_timeout(&w, dev_priv, 5*HZ) { |
| intel_prepare_reset(dev_priv); |
| |
| error->reason = reason; |
| error->stalled_mask = engine_mask; |
| |
| /* Signal that locked waiters should reset the GPU */ |
| smp_mb__before_atomic(); |
| set_bit(I915_RESET_HANDOFF, &error->flags); |
| wake_up_all(&error->wait_queue); |
| |
| /* Wait for anyone holding the lock to wakeup, without |
| * blocking indefinitely on struct_mutex. |
| */ |
| do { |
| if (mutex_trylock(&dev_priv->drm.struct_mutex)) { |
| i915_reset(dev_priv, engine_mask, reason); |
| mutex_unlock(&dev_priv->drm.struct_mutex); |
| } |
| } while (wait_on_bit_timeout(&error->flags, |
| I915_RESET_HANDOFF, |
| TASK_UNINTERRUPTIBLE, |
| 1)); |
| |
| error->stalled_mask = 0; |
| error->reason = NULL; |
| |
| intel_finish_reset(dev_priv); |
| } |
| |
| if (!test_bit(I915_WEDGED, &error->flags)) |
| kobject_uevent_env(kobj, KOBJ_CHANGE, reset_done_event); |
| } |
| |
| void i915_clear_error_registers(struct drm_i915_private *dev_priv) |
| { |
| u32 eir; |
| |
| if (!IS_GEN2(dev_priv)) |
| I915_WRITE(PGTBL_ER, I915_READ(PGTBL_ER)); |
| |
| if (INTEL_GEN(dev_priv) < 4) |
| I915_WRITE(IPEIR, I915_READ(IPEIR)); |
| else |
| I915_WRITE(IPEIR_I965, I915_READ(IPEIR_I965)); |
| |
| I915_WRITE(EIR, I915_READ(EIR)); |
| eir = I915_READ(EIR); |
| if (eir) { |
| /* |
| * some errors might have become stuck, |
| * mask them. |
| */ |
| DRM_DEBUG_DRIVER("EIR stuck: 0x%08x, masking\n", eir); |
| I915_WRITE(EMR, I915_READ(EMR) | eir); |
| I915_WRITE(IIR, I915_MASTER_ERROR_INTERRUPT); |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 8) { |
| I915_WRITE(GEN8_RING_FAULT_REG, |
| I915_READ(GEN8_RING_FAULT_REG) & ~RING_FAULT_VALID); |
| POSTING_READ(GEN8_RING_FAULT_REG); |
| } else if (INTEL_GEN(dev_priv) >= 6) { |
| struct intel_engine_cs *engine; |
| enum intel_engine_id id; |
| |
| for_each_engine(engine, dev_priv, id) { |
| I915_WRITE(RING_FAULT_REG(engine), |
| I915_READ(RING_FAULT_REG(engine)) & |
| ~RING_FAULT_VALID); |
| } |
| POSTING_READ(RING_FAULT_REG(dev_priv->engine[RCS])); |
| } |
| } |
| |
| /** |
| * i915_handle_error - handle a gpu error |
| * @dev_priv: i915 device private |
| * @engine_mask: mask representing engines that are hung |
| * @flags: control flags |
| * @fmt: Error message format string |
| * |
| * Do some basic checking of register state at error time and |
| * dump it to the syslog. Also call i915_capture_error_state() to make |
| * sure we get a record and make it available in debugfs. Fire a uevent |
| * so userspace knows something bad happened (should trigger collection |
| * of a ring dump etc.). |
| */ |
| void i915_handle_error(struct drm_i915_private *dev_priv, |
| u32 engine_mask, |
| unsigned long flags, |
| const char *fmt, ...) |
| { |
| struct intel_engine_cs *engine; |
| unsigned int tmp; |
| char error_msg[80]; |
| char *msg = NULL; |
| |
| if (fmt) { |
| va_list args; |
| |
| va_start(args, fmt); |
| vscnprintf(error_msg, sizeof(error_msg), fmt, args); |
| va_end(args); |
| |
| msg = error_msg; |
| } |
| |
| /* |
| * In most cases it's guaranteed that we get here with an RPM |
| * reference held, for example because there is a pending GPU |
| * request that won't finish until the reset is done. This |
| * isn't the case at least when we get here by doing a |
| * simulated reset via debugfs, so get an RPM reference. |
| */ |
| intel_runtime_pm_get(dev_priv); |
| |
| engine_mask &= INTEL_INFO(dev_priv)->ring_mask; |
| |
| if (flags & I915_ERROR_CAPTURE) { |
| i915_capture_error_state(dev_priv, engine_mask, msg); |
| i915_clear_error_registers(dev_priv); |
| } |
| |
| /* |
| * Try engine reset when available. We fall back to full reset if |
| * single reset fails. |
| */ |
| if (intel_has_reset_engine(dev_priv) && |
| !i915_terminally_wedged(&dev_priv->gpu_error)) { |
| for_each_engine_masked(engine, dev_priv, engine_mask, tmp) { |
| BUILD_BUG_ON(I915_RESET_MODESET >= I915_RESET_ENGINE); |
| if (test_and_set_bit(I915_RESET_ENGINE + engine->id, |
| &dev_priv->gpu_error.flags)) |
| continue; |
| |
| if (i915_reset_engine(engine, msg) == 0) |
| engine_mask &= ~intel_engine_flag(engine); |
| |
| clear_bit(I915_RESET_ENGINE + engine->id, |
| &dev_priv->gpu_error.flags); |
| wake_up_bit(&dev_priv->gpu_error.flags, |
| I915_RESET_ENGINE + engine->id); |
| } |
| } |
| |
| if (!engine_mask) |
| goto out; |
| |
| /* Full reset needs the mutex, stop any other user trying to do so. */ |
| if (test_and_set_bit(I915_RESET_BACKOFF, &dev_priv->gpu_error.flags)) { |
| wait_event(dev_priv->gpu_error.reset_queue, |
| !test_bit(I915_RESET_BACKOFF, |
| &dev_priv->gpu_error.flags)); |
| goto out; |
| } |
| |
| /* Prevent any other reset-engine attempt. */ |
| for_each_engine(engine, dev_priv, tmp) { |
| while (test_and_set_bit(I915_RESET_ENGINE + engine->id, |
| &dev_priv->gpu_error.flags)) |
| wait_on_bit(&dev_priv->gpu_error.flags, |
| I915_RESET_ENGINE + engine->id, |
| TASK_UNINTERRUPTIBLE); |
| } |
| |
| i915_reset_device(dev_priv, engine_mask, msg); |
| |
| for_each_engine(engine, dev_priv, tmp) { |
| clear_bit(I915_RESET_ENGINE + engine->id, |
| &dev_priv->gpu_error.flags); |
| } |
| |
| clear_bit(I915_RESET_BACKOFF, &dev_priv->gpu_error.flags); |
| wake_up_all(&dev_priv->gpu_error.reset_queue); |
| |
| out: |
| intel_runtime_pm_put(dev_priv); |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static int i8xx_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int i965_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int ironlake_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| uint32_t bit = INTEL_GEN(dev_priv) >= 7 ? |
| DE_PIPE_VBLANK_IVB(pipe) : DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_enable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| /* Even though there is no DMC, frame counter can get stuck when |
| * PSR is active as no frames are generated. |
| */ |
| if (HAS_PSR(dev_priv)) |
| drm_vblank_restore(dev, pipe); |
| |
| return 0; |
| } |
| |
| static int gen8_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| /* Even if there is no DMC, frame counter can get stuck when |
| * PSR is active as no frames are generated, so check only for PSR. |
| */ |
| if (HAS_PSR(dev_priv)) |
| drm_vblank_restore(dev, pipe); |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static void i8xx_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void i965_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ironlake_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| uint32_t bit = INTEL_GEN(dev_priv) >= 7 ? |
| DE_PIPE_VBLANK_IVB(pipe) : DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_disable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void gen8_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ibx_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| GEN3_IRQ_RESET(SDE); |
| |
| if (HAS_PCH_CPT(dev_priv) || HAS_PCH_LPT(dev_priv)) |
| I915_WRITE(SERR_INT, 0xffffffff); |
| } |
| |
| /* |
| * SDEIER is also touched by the interrupt handler to work around missed PCH |
| * interrupts. Hence we can't update it after the interrupt handler is enabled - |
| * instead we unconditionally enable all PCH interrupt sources here, but then |
| * only unmask them as needed with SDEIMR. |
| * |
| * This function needs to be called before interrupts are enabled. |
| */ |
| static void ibx_irq_pre_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| WARN_ON(I915_READ(SDEIER) != 0); |
| I915_WRITE(SDEIER, 0xffffffff); |
| POSTING_READ(SDEIER); |
| } |
| |
| static void gen5_gt_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| GEN3_IRQ_RESET(GT); |
| if (INTEL_GEN(dev_priv) >= 6) |
| GEN3_IRQ_RESET(GEN6_PM); |
| } |
| |
| static void vlv_display_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| if (IS_CHERRYVIEW(dev_priv)) |
| I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK_CHV); |
| else |
| I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK); |
| |
| i915_hotplug_interrupt_update_locked(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(VLV_); |
| dev_priv->irq_mask = ~0u; |
| } |
| |
| static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| u32 pipestat_mask; |
| u32 enable_mask; |
| enum pipe pipe; |
| |
| pipestat_mask = PIPE_CRC_DONE_INTERRUPT_STATUS; |
| |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| for_each_pipe(dev_priv, pipe) |
| i915_enable_pipestat(dev_priv, pipe, pipestat_mask); |
| |
| enable_mask = I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT; |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT | |
| I915_LPE_PIPE_C_INTERRUPT; |
| |
| WARN_ON(dev_priv->irq_mask != ~0u); |
| |
| dev_priv->irq_mask = ~enable_mask; |
| |
| GEN3_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| static void ironlake_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (IS_GEN5(dev_priv)) |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| GEN3_IRQ_RESET(DE); |
| if (IS_GEN7(dev_priv)) |
| I915_WRITE(GEN7_ERR_INT, 0xffffffff); |
| |
| if (IS_HASWELL(dev_priv)) { |
| I915_WRITE(EDP_PSR_IMR, 0xffffffff); |
| I915_WRITE(EDP_PSR_IIR, 0xffffffff); |
| } |
| |
| gen5_gt_irq_reset(dev_priv); |
| |
| ibx_irq_reset(dev_priv); |
| } |
| |
| static void valleyview_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| I915_WRITE(VLV_MASTER_IER, 0); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| gen5_gt_irq_reset(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void gen8_gt_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| GEN8_IRQ_RESET_NDX(GT, 0); |
| GEN8_IRQ_RESET_NDX(GT, 1); |
| GEN8_IRQ_RESET_NDX(GT, 2); |
| GEN8_IRQ_RESET_NDX(GT, 3); |
| } |
| |
| static void gen8_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int pipe; |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(dev_priv); |
| |
| I915_WRITE(EDP_PSR_IMR, 0xffffffff); |
| I915_WRITE(EDP_PSR_IIR, 0xffffffff); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); |
| |
| GEN3_IRQ_RESET(GEN8_DE_PORT_); |
| GEN3_IRQ_RESET(GEN8_DE_MISC_); |
| GEN3_IRQ_RESET(GEN8_PCU_); |
| |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_reset(dev_priv); |
| } |
| |
| static void gen11_gt_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| /* Disable RCS, BCS, VCS and VECS class engines. */ |
| I915_WRITE(GEN11_RENDER_COPY_INTR_ENABLE, 0); |
| I915_WRITE(GEN11_VCS_VECS_INTR_ENABLE, 0); |
| |
| /* Restore masks irqs on RCS, BCS, VCS and VECS engines. */ |
| I915_WRITE(GEN11_RCS0_RSVD_INTR_MASK, ~0); |
| I915_WRITE(GEN11_BCS_RSVD_INTR_MASK, ~0); |
| I915_WRITE(GEN11_VCS0_VCS1_INTR_MASK, ~0); |
| I915_WRITE(GEN11_VCS2_VCS3_INTR_MASK, ~0); |
| I915_WRITE(GEN11_VECS0_VECS1_INTR_MASK, ~0); |
| |
| I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_ENABLE, 0); |
| I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_MASK, ~0); |
| } |
| |
| static void gen11_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| I915_WRITE(GEN11_GFX_MSTR_IRQ, 0); |
| POSTING_READ(GEN11_GFX_MSTR_IRQ); |
| |
| gen11_gt_irq_reset(dev_priv); |
| |
| I915_WRITE(GEN11_DISPLAY_INT_CTL, 0); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); |
| |
| GEN3_IRQ_RESET(GEN8_DE_PORT_); |
| GEN3_IRQ_RESET(GEN8_DE_MISC_); |
| GEN3_IRQ_RESET(GEN11_DE_HPD_); |
| GEN3_IRQ_RESET(GEN11_GU_MISC_); |
| GEN3_IRQ_RESET(GEN8_PCU_); |
| |
| if (HAS_PCH_ICP(dev_priv)) |
| GEN3_IRQ_RESET(SDE); |
| } |
| |
| void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv, |
| u8 pipe_mask) |
| { |
| uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN; |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| if (!intel_irqs_enabled(dev_priv)) { |
| spin_unlock_irq(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| ~dev_priv->de_irq_mask[pipe] | extra_ier); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv, |
| u8 pipe_mask) |
| { |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| if (!intel_irqs_enabled(dev_priv)) { |
| spin_unlock_irq(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* make sure we're done processing display irqs */ |
| synchronize_irq(dev_priv->drm.irq); |
| } |
| |
| static void cherryview_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(GEN8_PCU_); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static u32 intel_hpd_enabled_irqs(struct drm_i915_private *dev_priv, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct intel_encoder *encoder; |
| u32 enabled_irqs = 0; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) |
| if (dev_priv->hotplug.stats[encoder->hpd_pin].state == HPD_ENABLED) |
| enabled_irqs |= hpd[encoder->hpd_pin]; |
| |
| return enabled_irqs; |
| } |
| |
| static void ibx_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| /* |
| * Enable digital hotplug on the PCH, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec). |
| * The pulse duration bits are reserved on LPT+. |
| */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug &= ~(PORTB_PULSE_DURATION_MASK | |
| PORTC_PULSE_DURATION_MASK | |
| PORTD_PULSE_DURATION_MASK); |
| hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; |
| hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; |
| hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; |
| /* |
| * When CPU and PCH are on the same package, port A |
| * HPD must be enabled in both north and south. |
| */ |
| if (HAS_PCH_LPT_LP(dev_priv)) |
| hotplug |= PORTA_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void ibx_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| hotplug_irqs = SDE_HOTPLUG_MASK; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_ibx); |
| } else { |
| hotplug_irqs = SDE_HOTPLUG_MASK_CPT; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_cpt); |
| } |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| ibx_hpd_detection_setup(dev_priv); |
| } |
| |
| static void icp_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(SHOTPLUG_CTL_DDI); |
| hotplug |= ICP_DDIA_HPD_ENABLE | |
| ICP_DDIB_HPD_ENABLE; |
| I915_WRITE(SHOTPLUG_CTL_DDI, hotplug); |
| |
| hotplug = I915_READ(SHOTPLUG_CTL_TC); |
| hotplug |= ICP_TC_HPD_ENABLE(PORT_TC1) | |
| ICP_TC_HPD_ENABLE(PORT_TC2) | |
| ICP_TC_HPD_ENABLE(PORT_TC3) | |
| ICP_TC_HPD_ENABLE(PORT_TC4); |
| I915_WRITE(SHOTPLUG_CTL_TC, hotplug); |
| } |
| |
| static void icp_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| hotplug_irqs = SDE_DDI_MASK_ICP | SDE_TC_MASK_ICP; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_icp); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| icp_hpd_detection_setup(dev_priv); |
| } |
| |
| static void gen11_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(GEN11_TC_HOTPLUG_CTL); |
| hotplug |= GEN11_HOTPLUG_CTL_ENABLE(PORT_TC1) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC2) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4); |
| I915_WRITE(GEN11_TC_HOTPLUG_CTL, hotplug); |
| |
| hotplug = I915_READ(GEN11_TBT_HOTPLUG_CTL); |
| hotplug |= GEN11_HOTPLUG_CTL_ENABLE(PORT_TC1) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC2) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4); |
| I915_WRITE(GEN11_TBT_HOTPLUG_CTL, hotplug); |
| } |
| |
| static void gen11_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| u32 val; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_gen11); |
| hotplug_irqs = GEN11_DE_TC_HOTPLUG_MASK | GEN11_DE_TBT_HOTPLUG_MASK; |
| |
| val = I915_READ(GEN11_DE_HPD_IMR); |
| val &= ~hotplug_irqs; |
| I915_WRITE(GEN11_DE_HPD_IMR, val); |
| POSTING_READ(GEN11_DE_HPD_IMR); |
| |
| gen11_hpd_detection_setup(dev_priv); |
| |
| if (HAS_PCH_ICP(dev_priv)) |
| icp_hpd_irq_setup(dev_priv); |
| } |
| |
| static void spt_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 val, hotplug; |
| |
| /* Display WA #1179 WaHardHangonHotPlug: cnp */ |
| if (HAS_PCH_CNP(dev_priv)) { |
| val = I915_READ(SOUTH_CHICKEN1); |
| val &= ~CHASSIS_CLK_REQ_DURATION_MASK; |
| val |= CHASSIS_CLK_REQ_DURATION(0xf); |
| I915_WRITE(SOUTH_CHICKEN1, val); |
| } |
| |
| /* Enable digital hotplug on the PCH */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTA_HOTPLUG_ENABLE | |
| PORTB_HOTPLUG_ENABLE | |
| PORTC_HOTPLUG_ENABLE | |
| PORTD_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG2); |
| hotplug |= PORTE_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG2, hotplug); |
| } |
| |
| static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| hotplug_irqs = SDE_HOTPLUG_MASK_SPT; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| spt_hpd_detection_setup(dev_priv); |
| } |
| |
| static void ilk_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| /* |
| * Enable digital hotplug on the CPU, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec) |
| * The pulse duration bits are reserved on HSW+. |
| */ |
| hotplug = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| hotplug &= ~DIGITAL_PORTA_PULSE_DURATION_MASK; |
| hotplug |= DIGITAL_PORTA_HOTPLUG_ENABLE | |
| DIGITAL_PORTA_PULSE_DURATION_2ms; |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, hotplug); |
| } |
| |
| static void ilk_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| if (INTEL_GEN(dev_priv) >= 8) { |
| hotplug_irqs = GEN8_PORT_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bdw); |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else if (INTEL_GEN(dev_priv) >= 7) { |
| hotplug_irqs = DE_DP_A_HOTPLUG_IVB; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_ivb); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else { |
| hotplug_irqs = DE_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_ilk); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } |
| |
| ilk_hpd_detection_setup(dev_priv); |
| |
| ibx_hpd_irq_setup(dev_priv); |
| } |
| |
| static void __bxt_hpd_detection_setup(struct drm_i915_private *dev_priv, |
| u32 enabled_irqs) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTA_HOTPLUG_ENABLE | |
| PORTB_HOTPLUG_ENABLE | |
| PORTC_HOTPLUG_ENABLE; |
| |
| DRM_DEBUG_KMS("Invert bit setting: hp_ctl:%x hp_port:%x\n", |
| hotplug, enabled_irqs); |
| hotplug &= ~BXT_DDI_HPD_INVERT_MASK; |
| |
| /* |
| * For BXT invert bit has to be set based on AOB design |
| * for HPD detection logic, update it based on VBT fields. |
| */ |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_A)) |
| hotplug |= BXT_DDIA_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIB) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_B)) |
| hotplug |= BXT_DDIB_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIC) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_C)) |
| hotplug |= BXT_DDIC_HPD_INVERT; |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void bxt_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| __bxt_hpd_detection_setup(dev_priv, BXT_DE_PORT_HOTPLUG_MASK); |
| } |
| |
| static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bxt); |
| hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK; |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| __bxt_hpd_detection_setup(dev_priv, enabled_irqs); |
| } |
| |
| static void ibx_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 mask; |
| |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| if (HAS_PCH_IBX(dev_priv)) |
| mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; |
| else if (HAS_PCH_CPT(dev_priv) || HAS_PCH_LPT(dev_priv)) |
| mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; |
| else |
| mask = SDE_GMBUS_CPT; |
| |
| gen3_assert_iir_is_zero(dev_priv, SDEIIR); |
| I915_WRITE(SDEIMR, ~mask); |
| |
| if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) || |
| HAS_PCH_LPT(dev_priv)) |
| ibx_hpd_detection_setup(dev_priv); |
| else |
| spt_hpd_detection_setup(dev_priv); |
| } |
| |
| static void gen5_gt_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 pm_irqs, gt_irqs; |
| |
| pm_irqs = gt_irqs = 0; |
| |
| dev_priv->gt_irq_mask = ~0; |
| if (HAS_L3_DPF(dev_priv)) { |
| /* L3 parity interrupt is always unmasked. */ |
| dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev_priv); |
| gt_irqs |= GT_PARITY_ERROR(dev_priv); |
| } |
| |
| gt_irqs |= GT_RENDER_USER_INTERRUPT; |
| if (IS_GEN5(dev_priv)) { |
| gt_irqs |= ILK_BSD_USER_INTERRUPT; |
| } else { |
| gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT; |
| } |
| |
| GEN3_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs); |
| |
| if (INTEL_GEN(dev_priv) >= 6) { |
| /* |
| * RPS interrupts will get enabled/disabled on demand when RPS |
| * itself is enabled/disabled. |
| */ |
| if (HAS_VEBOX(dev_priv)) { |
| pm_irqs |= PM_VEBOX_USER_INTERRUPT; |
| dev_priv->pm_ier |= PM_VEBOX_USER_INTERRUPT; |
| } |
| |
| dev_priv->pm_imr = 0xffffffff; |
| GEN3_IRQ_INIT(GEN6_PM, dev_priv->pm_imr, pm_irqs); |
| } |
| } |
| |
| static int ironlake_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 display_mask, extra_mask; |
| |
| if (INTEL_GEN(dev_priv) >= 7) { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | |
| DE_PCH_EVENT_IVB | DE_AUX_CHANNEL_A_IVB); |
| extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | |
| DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB | |
| DE_DP_A_HOTPLUG_IVB); |
| } else { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | |
| DE_AUX_CHANNEL_A | DE_PIPEB_CRC_DONE | |
| DE_PIPEA_CRC_DONE | DE_POISON); |
| extra_mask = (DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT | |
| DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN | |
| DE_DP_A_HOTPLUG); |
| } |
| |
| if (IS_HASWELL(dev_priv)) { |
| gen3_assert_iir_is_zero(dev_priv, EDP_PSR_IIR); |
| intel_psr_irq_control(dev_priv, dev_priv->psr.debug); |
| display_mask |= DE_EDP_PSR_INT_HSW; |
| } |
| |
| dev_priv->irq_mask = ~display_mask; |
| |
| ibx_irq_pre_postinstall(dev); |
| |
| GEN3_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); |
| |
| gen5_gt_irq_postinstall(dev); |
| |
| ilk_hpd_detection_setup(dev_priv); |
| |
| ibx_irq_postinstall(dev); |
| |
| if (IS_IRONLAKE_M(dev_priv)) { |
| /* Enable PCU event interrupts |
| * |
| * spinlocking not required here for correctness since interrupt |
| * setup is guaranteed to run in single-threaded context. But we |
| * need it to make the assert_spin_locked happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| ilk_enable_display_irq(dev_priv, DE_PCU_EVENT); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| return 0; |
| } |
| |
| void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = true; |
| |
| if (intel_irqs_enabled(dev_priv)) { |
| vlv_display_irq_reset(dev_priv); |
| vlv_display_irq_postinstall(dev_priv); |
| } |
| } |
| |
| void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = false; |
| |
| if (intel_irqs_enabled(dev_priv)) |
| vlv_display_irq_reset(dev_priv); |
| } |
| |
| |
| static int valleyview_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| gen5_gt_irq_postinstall(dev); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| return 0; |
| } |
| |
| static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| /* These are interrupts we'll toggle with the ring mask register */ |
| uint32_t gt_interrupts[] = { |
| GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_RCS_IRQ_SHIFT | |
| GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT, |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT | |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS2_IRQ_SHIFT, |
| 0, |
| GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT |
| }; |
| |
| if (HAS_L3_DPF(dev_priv)) |
| gt_interrupts[0] |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT; |
| |
| dev_priv->pm_ier = 0x0; |
| dev_priv->pm_imr = ~dev_priv->pm_ier; |
| GEN8_IRQ_INIT_NDX(GT, 0, ~gt_interrupts[0], gt_interrupts[0]); |
| GEN8_IRQ_INIT_NDX(GT, 1, ~gt_interrupts[1], gt_interrupts[1]); |
| /* |
| * RPS interrupts will get enabled/disabled on demand when RPS itself |
| * is enabled/disabled. Same wil be the case for GuC interrupts. |
| */ |
| GEN8_IRQ_INIT_NDX(GT, 2, dev_priv->pm_imr, dev_priv->pm_ier); |
| GEN8_IRQ_INIT_NDX(GT, 3, ~gt_interrupts[3], gt_interrupts[3]); |
| } |
| |
| static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE; |
| uint32_t de_pipe_enables; |
| u32 de_port_masked = GEN8_AUX_CHANNEL_A; |
| u32 de_port_enables; |
| u32 de_misc_masked = GEN8_DE_EDP_PSR; |
| enum pipe pipe; |
| |
| if (INTEL_GEN(dev_priv) <= 10) |
| de_misc_masked |= GEN8_DE_MISC_GSE; |
| |
| if (INTEL_GEN(dev_priv) >= 9) { |
| de_pipe_masked |= GEN9_DE_PIPE_IRQ_FAULT_ERRORS; |
| de_port_masked |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | |
| GEN9_AUX_CHANNEL_D; |
| if (IS_GEN9_LP(dev_priv)) |
| de_port_masked |= BXT_DE_PORT_GMBUS; |
| } else { |
| de_pipe_masked |= GEN8_DE_PIPE_IRQ_FAULT_ERRORS; |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 11) |
| de_port_masked |= ICL_AUX_CHANNEL_E; |
| |
| if (IS_CNL_WITH_PORT_F(dev_priv) || INTEL_GEN(dev_priv) >= 11) |
| de_port_masked |= CNL_AUX_CHANNEL_F; |
| |
| de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | |
| GEN8_PIPE_FIFO_UNDERRUN; |
| |
| de_port_enables = de_port_masked; |
| if (IS_GEN9_LP(dev_priv)) |
| de_port_enables |= BXT_DE_PORT_HOTPLUG_MASK; |
| else if (IS_BROADWELL(dev_priv)) |
| de_port_enables |= GEN8_PORT_DP_A_HOTPLUG; |
| |
| gen3_assert_iir_is_zero(dev_priv, EDP_PSR_IIR); |
| intel_psr_irq_control(dev_priv, dev_priv->psr.debug); |
| |
| for_each_pipe(dev_priv, pipe) { |
| dev_priv->de_irq_mask[pipe] = ~de_pipe_masked; |
| |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| de_pipe_enables); |
| } |
| |
| GEN3_IRQ_INIT(GEN8_DE_PORT_, ~de_port_masked, de_port_enables); |
| GEN3_IRQ_INIT(GEN8_DE_MISC_, ~de_misc_masked, de_misc_masked); |
| |
| if (INTEL_GEN(dev_priv) >= 11) { |
| u32 de_hpd_masked = 0; |
| u32 de_hpd_enables = GEN11_DE_TC_HOTPLUG_MASK | |
| GEN11_DE_TBT_HOTPLUG_MASK; |
| |
| GEN3_IRQ_INIT(GEN11_DE_HPD_, ~de_hpd_masked, de_hpd_enables); |
| gen11_hpd_detection_setup(dev_priv); |
| } else if (IS_GEN9_LP(dev_priv)) { |
| bxt_hpd_detection_setup(dev_priv); |
| } else if (IS_BROADWELL(dev_priv)) { |
| ilk_hpd_detection_setup(dev_priv); |
| } |
| } |
| |
| static int gen8_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_pre_postinstall(dev); |
| |
| gen8_gt_irq_postinstall(dev_priv); |
| gen8_de_irq_postinstall(dev_priv); |
| |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_postinstall(dev); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| return 0; |
| } |
| |
| static void gen11_gt_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| const u32 irqs = GT_RENDER_USER_INTERRUPT | GT_CONTEXT_SWITCH_INTERRUPT; |
| |
| BUILD_BUG_ON(irqs & 0xffff0000); |
| |
| /* Enable RCS, BCS, VCS and VECS class interrupts. */ |
| I915_WRITE(GEN11_RENDER_COPY_INTR_ENABLE, irqs << 16 | irqs); |
| I915_WRITE(GEN11_VCS_VECS_INTR_ENABLE, irqs << 16 | irqs); |
| |
| /* Unmask irqs on RCS, BCS, VCS and VECS engines. */ |
| I915_WRITE(GEN11_RCS0_RSVD_INTR_MASK, ~(irqs << 16)); |
| I915_WRITE(GEN11_BCS_RSVD_INTR_MASK, ~(irqs << 16)); |
| I915_WRITE(GEN11_VCS0_VCS1_INTR_MASK, ~(irqs | irqs << 16)); |
| I915_WRITE(GEN11_VCS2_VCS3_INTR_MASK, ~(irqs | irqs << 16)); |
| I915_WRITE(GEN11_VECS0_VECS1_INTR_MASK, ~(irqs | irqs << 16)); |
| |
| /* |
| * RPS interrupts will get enabled/disabled on demand when RPS itself |
| * is enabled/disabled. |
| */ |
| dev_priv->pm_ier = 0x0; |
| dev_priv->pm_imr = ~dev_priv->pm_ier; |
| I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_ENABLE, 0); |
| I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_MASK, ~0); |
| } |
| |
| static void icp_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 mask = SDE_GMBUS_ICP; |
| |
| WARN_ON(I915_READ(SDEIER) != 0); |
| I915_WRITE(SDEIER, 0xffffffff); |
| POSTING_READ(SDEIER); |
| |
| gen3_assert_iir_is_zero(dev_priv, SDEIIR); |
| I915_WRITE(SDEIMR, ~mask); |
| |
| icp_hpd_detection_setup(dev_priv); |
| } |
| |
| static int gen11_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 gu_misc_masked = GEN11_GU_MISC_GSE; |
| |
| if (HAS_PCH_ICP(dev_priv)) |
| icp_irq_postinstall(dev); |
| |
| gen11_gt_irq_postinstall(dev_priv); |
| gen8_de_irq_postinstall(dev_priv); |
| |
| GEN3_IRQ_INIT(GEN11_GU_MISC_, ~gu_misc_masked, gu_misc_masked); |
| |
| I915_WRITE(GEN11_DISPLAY_INT_CTL, GEN11_DISPLAY_IRQ_ENABLE); |
| |
| I915_WRITE(GEN11_GFX_MSTR_IRQ, GEN11_MASTER_IRQ); |
| POSTING_READ(GEN11_GFX_MSTR_IRQ); |
| |
| return 0; |
| } |
| |
| static int cherryview_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| gen8_gt_irq_postinstall(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| return 0; |
| } |
| |
| static void i8xx_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| I915_WRITE16(HWSTAM, 0xffff); |
| |
| GEN2_IRQ_RESET(); |
| } |
| |
| static int i8xx_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u16 enable_mask; |
| |
| I915_WRITE16(EMR, ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| GEN2_IRQ_INIT(, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| return 0; |
| } |
| |
| static void i8xx_error_irq_ack(struct drm_i915_private *dev_priv, |
| u16 *eir, u16 *eir_stuck) |
| { |
| u16 emr; |
| |
| *eir = I915_READ16(EIR); |
| |
| if (*eir) |
| I915_WRITE16(EIR, *eir); |
| |
| *eir_stuck = I915_READ16(EIR); |
| if (*eir_stuck == 0) |
| return; |
| |
| /* |
| * Toggle all EMR bits to make sure we get an edge |
| * in the ISR master error bit if we don't clear |
| * all the EIR bits. Otherwise the edge triggered |
| * IIR on i965/g4x wouldn't notice that an interrupt |
| * is still pending. Also some EIR bits can't be |
| * cleared except by handling the underlying error |
| * (or by a GPU reset) so we mask any bit that |
| * remains set. |
| */ |
| emr = I915_READ16(EMR); |
| I915_WRITE16(EMR, 0xffff); |
| I915_WRITE16(EMR, emr | *eir_stuck); |
| } |
| |
| static void i8xx_error_irq_handler(struct drm_i915_private *dev_priv, |
| u16 eir, u16 eir_stuck) |
| { |
| DRM_DEBUG("Master Error: EIR 0x%04x\n", eir); |
| |
| if (eir_stuck) |
| DRM_DEBUG_DRIVER("EIR stuck: 0x%04x, masked\n", eir_stuck); |
| } |
| |
| static void i9xx_error_irq_ack(struct drm_i915_private *dev_priv, |
| u32 *eir, u32 *eir_stuck) |
| { |
| u32 emr; |
| |
| *eir = I915_READ(EIR); |
| |
| I915_WRITE(EIR, *eir); |
| |
| *eir_stuck = I915_READ(EIR); |
| if (*eir_stuck == 0) |
| return; |
| |
| /* |
| * Toggle all EMR bits to make sure we get an edge |
| * in the ISR master error bit if we don't clear |
| * all the EIR bits. Otherwise the edge triggered |
| * IIR on i965/g4x wouldn't notice that an interrupt |
| * is still pending. Also some EIR bits can't be |
| * cleared except by handling the underlying error |
| * (or by a GPU reset) so we mask any bit that |
| * remains set. |
| */ |
| emr = I915_READ(EMR); |
| I915_WRITE(EMR, 0xffffffff); |
| I915_WRITE(EMR, emr | *eir_stuck); |
| } |
| |
| static void i9xx_error_irq_handler(struct drm_i915_private *dev_priv, |
| u32 eir, u32 eir_stuck) |
| { |
| DRM_DEBUG("Master Error, EIR 0x%08x\n", eir); |
| |
| if (eir_stuck) |
| DRM_DEBUG_DRIVER("EIR stuck: 0x%08x, masked\n", eir_stuck); |
| } |
| |
| static irqreturn_t i8xx_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u16 eir = 0, eir_stuck = 0; |
| u16 iir; |
| |
| iir = I915_READ16(IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i8xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| I915_WRITE16(IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[RCS]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i8xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| i8xx_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i915_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (I915_HAS_HOTPLUG(dev_priv)) { |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| GEN3_IRQ_RESET(); |
| } |
| |
| static int i915_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 enable_mask; |
| |
| I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (I915_HAS_HOTPLUG(dev_priv)) { |
| /* Enable in IER... */ |
| enable_mask |= I915_DISPLAY_PORT_INTERRUPT; |
| /* and unmask in IMR */ |
| dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT; |
| } |
| |
| GEN3_IRQ_INIT(, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_asle_pipestat(dev_priv); |
| |
| return 0; |
| } |
| |
| static irqreturn_t i915_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 eir = 0, eir_stuck = 0; |
| u32 hotplug_status = 0; |
| u32 iir; |
| |
| iir = I915_READ(IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| if (I915_HAS_HOTPLUG(dev_priv) && |
| iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| I915_WRITE(IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[RCS]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| i915_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i965_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| GEN3_IRQ_RESET(); |
| } |
| |
| static int i965_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 enable_mask; |
| u32 error_mask; |
| |
| /* |
| * Enable some error detection, note the instruction error mask |
| * bit is reserved, so we leave it masked. |
| */ |
| if (IS_G4X(dev_priv)) { |
| error_mask = ~(GM45_ERROR_PAGE_TABLE | |
| GM45_ERROR_MEM_PRIV | |
| GM45_ERROR_CP_PRIV | |
| I915_ERROR_MEMORY_REFRESH); |
| } else { |
| error_mask = ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH); |
| } |
| I915_WRITE(EMR, error_mask); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (IS_G4X(dev_priv)) |
| enable_mask |= I915_BSD_USER_INTERRUPT; |
| |
| GEN3_IRQ_INIT(, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_asle_pipestat(dev_priv); |
| |
| return 0; |
| } |
| |
| static void i915_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_en; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| /* Note HDMI and DP share hotplug bits */ |
| /* enable bits are the same for all generations */ |
| hotplug_en = intel_hpd_enabled_irqs(dev_priv, hpd_mask_i915); |
| /* Programming the CRT detection parameters tends |
| to generate a spurious hotplug event about three |
| seconds later. So just do it once. |
| */ |
| if (IS_G4X(dev_priv)) |
| hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| |
| /* Ignore TV since it's buggy */ |
| i915_hotplug_interrupt_update_locked(dev_priv, |
| HOTPLUG_INT_EN_MASK | |
| CRT_HOTPLUG_VOLTAGE_COMPARE_MASK | |
| CRT_HOTPLUG_ACTIVATION_PERIOD_64, |
| hotplug_en); |
| } |
| |
| static irqreturn_t i965_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 eir = 0, eir_stuck = 0; |
| u32 hotplug_status = 0; |
| u32 iir; |
| |
| iir = I915_READ(IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| I915_WRITE(IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[RCS]); |
| |
| if (iir & I915_BSD_USER_INTERRUPT) |
| notify_ring(dev_priv->engine[VCS]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| i965_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_irq_init - initializes irq support |
| * @dev_priv: i915 device instance |
| * |
| * This function initializes all the irq support including work items, timers |
| * and all the vtables. It does not setup the interrupt itself though. |
| */ |
| void intel_irq_init(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct intel_rps *rps = &dev_priv->gt_pm.rps; |
| int i; |
| |
| intel_hpd_init_work(dev_priv); |
| |
| INIT_WORK(&rps->work, gen6_pm_rps_work); |
| |
| INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work); |
| for (i = 0; i < MAX_L3_SLICES; ++i) |
| dev_priv->l3_parity.remap_info[i] = NULL; |
| |
| if (HAS_GUC_SCHED(dev_priv)) |
| dev_priv->pm_guc_events = GEN9_GUC_TO_HOST_INT_EVENT; |
| |
| /* Let's track the enabled rps events */ |
| if (IS_VALLEYVIEW(dev_priv)) |
| /* WaGsvRC0ResidencyMethod:vlv */ |
| dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED; |
| else |
| dev_priv->pm_rps_events = (GEN6_PM_RP_UP_THRESHOLD | |
| GEN6_PM_RP_DOWN_THRESHOLD | |
| GEN6_PM_RP_DOWN_TIMEOUT); |
| |
| rps->pm_intrmsk_mbz = 0; |
| |
| /* |
| * SNB,IVB,HSW can while VLV,CHV may hard hang on looping batchbuffer |
| * if GEN6_PM_UP_EI_EXPIRED is masked. |
| * |
| * TODO: verify if this can be reproduced on VLV,CHV. |
| */ |
| if (INTEL_GEN(dev_priv) <= 7) |
| rps->pm_intrmsk_mbz |= GEN6_PM_RP_UP_EI_EXPIRED; |
| |
| if (INTEL_GEN(dev_priv) >= 8) |
| rps->pm_intrmsk_mbz |= GEN8_PMINTR_DISABLE_REDIRECT_TO_GUC; |
| |
| if (IS_GEN2(dev_priv)) { |
| /* Gen2 doesn't have a hardware frame counter */ |
| dev->max_vblank_count = 0; |
| } else if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5) { |
| dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ |
| dev->driver->get_vblank_counter = g4x_get_vblank_counter; |
| } else { |
| dev->driver->get_vblank_counter = i915_get_vblank_counter; |
| dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ |
| } |
| |
| /* |
| * Opt out of the vblank disable timer on everything except gen2. |
| * Gen2 doesn't have a hardware frame counter and so depends on |
| * vblank interrupts to produce sane vblank seuquence numbers. |
| */ |
| if (!IS_GEN2(dev_priv)) |
| dev->vblank_disable_immediate = true; |
| |
| /* Most platforms treat the display irq block as an always-on |
| * power domain. vlv/chv can disable it at runtime and need |
| * special care to avoid writing any of the display block registers |
| * outside of the power domain. We defer setting up the display irqs |
| * in this case to the runtime pm. |
| */ |
| dev_priv->display_irqs_enabled = true; |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| dev_priv->display_irqs_enabled = false; |
| |
| dev_priv->hotplug.hpd_storm_threshold = HPD_STORM_DEFAULT_THRESHOLD; |
| |
| dev->driver->get_vblank_timestamp = drm_calc_vbltimestamp_from_scanoutpos; |
| dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| dev->driver->irq_handler = cherryview_irq_handler; |
| dev->driver->irq_preinstall = cherryview_irq_reset; |
| dev->driver->irq_postinstall = cherryview_irq_postinstall; |
| dev->driver->irq_uninstall = cherryview_irq_reset; |
| dev->driver->enable_vblank = i965_enable_vblank; |
| dev->driver->disable_vblank = i965_disable_vblank; |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } else if (IS_VALLEYVIEW(dev_priv)) { |
| dev->driver->irq_handler = valleyview_irq_handler; |
| dev->driver->irq_preinstall = valleyview_irq_reset; |
| dev->driver->irq_postinstall = valleyview_irq_postinstall; |
| dev->driver->irq_uninstall = valleyview_irq_reset; |
| dev->driver->enable_vblank = i965_enable_vblank; |
| dev->driver->disable_vblank = i965_disable_vblank; |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } else if (INTEL_GEN(dev_priv) >= 11) { |
| dev->driver->irq_handler = gen11_irq_handler; |
| dev->driver->irq_preinstall = gen11_irq_reset; |
| dev->driver->irq_postinstall = gen11_irq_postinstall; |
| dev->driver->irq_uninstall = gen11_irq_reset; |
| dev->driver->enable_vblank = gen8_enable_vblank; |
| dev->driver->disable_vblank = gen8_disable_vblank; |
| dev_priv->display.hpd_irq_setup = gen11_hpd_irq_setup; |
| } else if (INTEL_GEN(dev_priv) >= 8) { |
| dev->driver->irq_handler = gen8_irq_handler; |
| dev->driver->irq_preinstall = gen8_irq_reset; |
| dev->driver->irq_postinstall = gen8_irq_postinstall; |
| dev->driver->irq_uninstall = gen8_irq_reset; |
| dev->driver->enable_vblank = gen8_enable_vblank; |
| dev->driver->disable_vblank = gen8_disable_vblank; |
| if (IS_GEN9_LP(dev_priv)) |
| dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup; |
| else if (HAS_PCH_SPT(dev_priv) || HAS_PCH_KBP(dev_priv) || |
| HAS_PCH_CNP(dev_priv)) |
| dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup; |
| else |
| dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| dev->driver->irq_handler = ironlake_irq_handler; |
| dev->driver->irq_preinstall = ironlake_irq_reset; |
| dev->driver->irq_postinstall = ironlake_irq_postinstall; |
| dev->driver->irq_uninstall = ironlake_irq_reset; |
| dev->driver->enable_vblank = ironlake_enable_vblank; |
| dev->driver->disable_vblank = ironlake_disable_vblank; |
| dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; |
| } else { |
| if (IS_GEN2(dev_priv)) { |
| dev->driver->irq_preinstall = i8xx_irq_reset; |
| dev->driver->irq_postinstall = i8xx_irq_postinstall; |
| dev->driver->irq_handler = i8xx_irq_handler; |
| dev->driver->irq_uninstall = i8xx_irq_reset; |
| dev->driver->enable_vblank = i8xx_enable_vblank; |
| dev->driver->disable_vblank = i8xx_disable_vblank; |
| } else if (IS_GEN3(dev_priv)) { |
| dev->driver->irq_preinstall = i915_irq_reset; |
| dev->driver->irq_postinstall = i915_irq_postinstall; |
| dev->driver->irq_uninstall = i915_irq_reset; |
| dev->driver->irq_handler = i915_irq_handler; |
| dev->driver->enable_vblank = i8xx_enable_vblank; |
| dev->driver->disable_vblank = i8xx_disable_vblank; |
| } else { |
| dev->driver->irq_preinstall = i965_irq_reset; |
| dev->driver->irq_postinstall = i965_irq_postinstall; |
| dev->driver->irq_uninstall = i965_irq_reset; |
| dev->driver->irq_handler = i965_irq_handler; |
| dev->driver->enable_vblank = i965_enable_vblank; |
| dev->driver->disable_vblank = i965_disable_vblank; |
| } |
| if (I915_HAS_HOTPLUG(dev_priv)) |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } |
| } |
| |
| /** |
| * intel_irq_fini - deinitializes IRQ support |
| * @i915: i915 device instance |
| * |
| * This function deinitializes all the IRQ support. |
| */ |
| void intel_irq_fini(struct drm_i915_private *i915) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_L3_SLICES; ++i) |
| kfree(i915->l3_parity.remap_info[i]); |
| } |
| |
| /** |
| * intel_irq_install - enables the hardware interrupt |
| * @dev_priv: i915 device instance |
| * |
| * This function enables the hardware interrupt handling, but leaves the hotplug |
| * handling still disabled. It is called after intel_irq_init(). |
| * |
| * In the driver load and resume code we need working interrupts in a few places |
| * but don't want to deal with the hassle of concurrent probe and hotplug |
| * workers. Hence the split into this two-stage approach. |
| */ |
| int intel_irq_install(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * We enable some interrupt sources in our postinstall hooks, so mark |
| * interrupts as enabled _before_ actually enabling them to avoid |
| * special cases in our ordering checks. |
| */ |
| dev_priv->runtime_pm.irqs_enabled = true; |
| |
| return drm_irq_install(&dev_priv->drm, dev_priv->drm.pdev->irq); |
| } |
| |
| /** |
| * intel_irq_uninstall - finilizes all irq handling |
| * @dev_priv: i915 device instance |
| * |
| * This stops interrupt and hotplug handling and unregisters and frees all |
| * resources acquired in the init functions. |
| */ |
| void intel_irq_uninstall(struct drm_i915_private *dev_priv) |
| { |
| drm_irq_uninstall(&dev_priv->drm); |
| intel_hpd_cancel_work(dev_priv); |
| dev_priv->runtime_pm.irqs_enabled = false; |
| } |
| |
| /** |
| * intel_runtime_pm_disable_interrupts - runtime interrupt disabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to disable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| dev_priv->drm.driver->irq_uninstall(&dev_priv->drm); |
| dev_priv->runtime_pm.irqs_enabled = false; |
| synchronize_irq(dev_priv->drm.irq); |
| } |
| |
| /** |
| * intel_runtime_pm_enable_interrupts - runtime interrupt enabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to enable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| dev_priv->runtime_pm.irqs_enabled = true; |
| dev_priv->drm.driver->irq_preinstall(&dev_priv->drm); |
| dev_priv->drm.driver->irq_postinstall(&dev_priv->drm); |
| } |