| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright 2019-2021 NXP |
| * |
| * This is an umbrella module for all network switches that are |
| * register-compatible with Ocelot and that perform I/O to their host CPU |
| * through an NPI (Node Processor Interface) Ethernet port. |
| */ |
| #include <uapi/linux/if_bridge.h> |
| #include <soc/mscc/ocelot_vcap.h> |
| #include <soc/mscc/ocelot_qsys.h> |
| #include <soc/mscc/ocelot_sys.h> |
| #include <soc/mscc/ocelot_dev.h> |
| #include <soc/mscc/ocelot_ana.h> |
| #include <soc/mscc/ocelot_ptp.h> |
| #include <soc/mscc/ocelot.h> |
| #include <linux/dsa/8021q.h> |
| #include <linux/dsa/ocelot.h> |
| #include <linux/platform_device.h> |
| #include <linux/ptp_classify.h> |
| #include <linux/module.h> |
| #include <linux/of_net.h> |
| #include <linux/pci.h> |
| #include <linux/of.h> |
| #include <net/pkt_sched.h> |
| #include <net/dsa.h> |
| #include "felix.h" |
| |
| static int felix_tag_8021q_rxvlan_add(struct felix *felix, int port, u16 vid, |
| bool pvid, bool untagged) |
| { |
| struct ocelot_vcap_filter *outer_tagging_rule; |
| struct ocelot *ocelot = &felix->ocelot; |
| struct dsa_switch *ds = felix->ds; |
| int key_length, upstream, err; |
| |
| /* We don't need to install the rxvlan into the other ports' filtering |
| * tables, because we're just pushing the rxvlan when sending towards |
| * the CPU |
| */ |
| if (!pvid) |
| return 0; |
| |
| key_length = ocelot->vcap[VCAP_ES0].keys[VCAP_ES0_IGR_PORT].length; |
| upstream = dsa_upstream_port(ds, port); |
| |
| outer_tagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), |
| GFP_KERNEL); |
| if (!outer_tagging_rule) |
| return -ENOMEM; |
| |
| outer_tagging_rule->key_type = OCELOT_VCAP_KEY_ANY; |
| outer_tagging_rule->prio = 1; |
| outer_tagging_rule->id.cookie = port; |
| outer_tagging_rule->id.tc_offload = false; |
| outer_tagging_rule->block_id = VCAP_ES0; |
| outer_tagging_rule->type = OCELOT_VCAP_FILTER_OFFLOAD; |
| outer_tagging_rule->lookup = 0; |
| outer_tagging_rule->ingress_port.value = port; |
| outer_tagging_rule->ingress_port.mask = GENMASK(key_length - 1, 0); |
| outer_tagging_rule->egress_port.value = upstream; |
| outer_tagging_rule->egress_port.mask = GENMASK(key_length - 1, 0); |
| outer_tagging_rule->action.push_outer_tag = OCELOT_ES0_TAG; |
| outer_tagging_rule->action.tag_a_tpid_sel = OCELOT_TAG_TPID_SEL_8021AD; |
| outer_tagging_rule->action.tag_a_vid_sel = 1; |
| outer_tagging_rule->action.vid_a_val = vid; |
| |
| err = ocelot_vcap_filter_add(ocelot, outer_tagging_rule, NULL); |
| if (err) |
| kfree(outer_tagging_rule); |
| |
| return err; |
| } |
| |
| static int felix_tag_8021q_txvlan_add(struct felix *felix, int port, u16 vid, |
| bool pvid, bool untagged) |
| { |
| struct ocelot_vcap_filter *untagging_rule, *redirect_rule; |
| struct ocelot *ocelot = &felix->ocelot; |
| struct dsa_switch *ds = felix->ds; |
| int upstream, err; |
| |
| /* tag_8021q.c assumes we are implementing this via port VLAN |
| * membership, which we aren't. So we don't need to add any VCAP filter |
| * for the CPU port. |
| */ |
| if (ocelot->ports[port]->is_dsa_8021q_cpu) |
| return 0; |
| |
| untagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL); |
| if (!untagging_rule) |
| return -ENOMEM; |
| |
| redirect_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL); |
| if (!redirect_rule) { |
| kfree(untagging_rule); |
| return -ENOMEM; |
| } |
| |
| upstream = dsa_upstream_port(ds, port); |
| |
| untagging_rule->key_type = OCELOT_VCAP_KEY_ANY; |
| untagging_rule->ingress_port_mask = BIT(upstream); |
| untagging_rule->vlan.vid.value = vid; |
| untagging_rule->vlan.vid.mask = VLAN_VID_MASK; |
| untagging_rule->prio = 1; |
| untagging_rule->id.cookie = port; |
| untagging_rule->id.tc_offload = false; |
| untagging_rule->block_id = VCAP_IS1; |
| untagging_rule->type = OCELOT_VCAP_FILTER_OFFLOAD; |
| untagging_rule->lookup = 0; |
| untagging_rule->action.vlan_pop_cnt_ena = true; |
| untagging_rule->action.vlan_pop_cnt = 1; |
| untagging_rule->action.pag_override_mask = 0xff; |
| untagging_rule->action.pag_val = port; |
| |
| err = ocelot_vcap_filter_add(ocelot, untagging_rule, NULL); |
| if (err) { |
| kfree(untagging_rule); |
| kfree(redirect_rule); |
| return err; |
| } |
| |
| redirect_rule->key_type = OCELOT_VCAP_KEY_ANY; |
| redirect_rule->ingress_port_mask = BIT(upstream); |
| redirect_rule->pag = port; |
| redirect_rule->prio = 1; |
| redirect_rule->id.cookie = port; |
| redirect_rule->id.tc_offload = false; |
| redirect_rule->block_id = VCAP_IS2; |
| redirect_rule->type = OCELOT_VCAP_FILTER_OFFLOAD; |
| redirect_rule->lookup = 0; |
| redirect_rule->action.mask_mode = OCELOT_MASK_MODE_REDIRECT; |
| redirect_rule->action.port_mask = BIT(port); |
| |
| err = ocelot_vcap_filter_add(ocelot, redirect_rule, NULL); |
| if (err) { |
| ocelot_vcap_filter_del(ocelot, untagging_rule); |
| kfree(redirect_rule); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int felix_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid, |
| u16 flags) |
| { |
| bool untagged = flags & BRIDGE_VLAN_INFO_UNTAGGED; |
| bool pvid = flags & BRIDGE_VLAN_INFO_PVID; |
| struct ocelot *ocelot = ds->priv; |
| |
| if (vid_is_dsa_8021q_rxvlan(vid)) |
| return felix_tag_8021q_rxvlan_add(ocelot_to_felix(ocelot), |
| port, vid, pvid, untagged); |
| |
| if (vid_is_dsa_8021q_txvlan(vid)) |
| return felix_tag_8021q_txvlan_add(ocelot_to_felix(ocelot), |
| port, vid, pvid, untagged); |
| |
| return 0; |
| } |
| |
| static int felix_tag_8021q_rxvlan_del(struct felix *felix, int port, u16 vid) |
| { |
| struct ocelot_vcap_filter *outer_tagging_rule; |
| struct ocelot_vcap_block *block_vcap_es0; |
| struct ocelot *ocelot = &felix->ocelot; |
| |
| block_vcap_es0 = &ocelot->block[VCAP_ES0]; |
| |
| outer_tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_es0, |
| port, false); |
| /* In rxvlan_add, we had the "if (!pvid) return 0" logic to avoid |
| * installing outer tagging ES0 rules where they weren't needed. |
| * But in rxvlan_del, the API doesn't give us the "flags" anymore, |
| * so that forces us to be slightly sloppy here, and just assume that |
| * if we didn't find an outer_tagging_rule it means that there was |
| * none in the first place, i.e. rxvlan_del is called on a non-pvid |
| * port. This is most probably true though. |
| */ |
| if (!outer_tagging_rule) |
| return 0; |
| |
| return ocelot_vcap_filter_del(ocelot, outer_tagging_rule); |
| } |
| |
| static int felix_tag_8021q_txvlan_del(struct felix *felix, int port, u16 vid) |
| { |
| struct ocelot_vcap_filter *untagging_rule, *redirect_rule; |
| struct ocelot_vcap_block *block_vcap_is1; |
| struct ocelot_vcap_block *block_vcap_is2; |
| struct ocelot *ocelot = &felix->ocelot; |
| int err; |
| |
| if (ocelot->ports[port]->is_dsa_8021q_cpu) |
| return 0; |
| |
| block_vcap_is1 = &ocelot->block[VCAP_IS1]; |
| block_vcap_is2 = &ocelot->block[VCAP_IS2]; |
| |
| untagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is1, |
| port, false); |
| if (!untagging_rule) |
| return 0; |
| |
| err = ocelot_vcap_filter_del(ocelot, untagging_rule); |
| if (err) |
| return err; |
| |
| redirect_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is2, |
| port, false); |
| if (!redirect_rule) |
| return 0; |
| |
| return ocelot_vcap_filter_del(ocelot, redirect_rule); |
| } |
| |
| static int felix_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| if (vid_is_dsa_8021q_rxvlan(vid)) |
| return felix_tag_8021q_rxvlan_del(ocelot_to_felix(ocelot), |
| port, vid); |
| |
| if (vid_is_dsa_8021q_txvlan(vid)) |
| return felix_tag_8021q_txvlan_del(ocelot_to_felix(ocelot), |
| port, vid); |
| |
| return 0; |
| } |
| |
| /* Alternatively to using the NPI functionality, that same hardware MAC |
| * connected internally to the enetc or fman DSA master can be configured to |
| * use the software-defined tag_8021q frame format. As far as the hardware is |
| * concerned, it thinks it is a "dumb switch" - the queues of the CPU port |
| * module are now disconnected from it, but can still be accessed through |
| * register-based MMIO. |
| */ |
| static void felix_8021q_cpu_port_init(struct ocelot *ocelot, int port) |
| { |
| mutex_lock(&ocelot->fwd_domain_lock); |
| |
| ocelot->ports[port]->is_dsa_8021q_cpu = true; |
| ocelot->npi = -1; |
| |
| /* Overwrite PGID_CPU with the non-tagging port */ |
| ocelot_write_rix(ocelot, BIT(port), ANA_PGID_PGID, PGID_CPU); |
| |
| ocelot_apply_bridge_fwd_mask(ocelot, true); |
| |
| mutex_unlock(&ocelot->fwd_domain_lock); |
| } |
| |
| static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port) |
| { |
| mutex_lock(&ocelot->fwd_domain_lock); |
| |
| ocelot->ports[port]->is_dsa_8021q_cpu = false; |
| |
| /* Restore PGID_CPU */ |
| ocelot_write_rix(ocelot, BIT(ocelot->num_phys_ports), ANA_PGID_PGID, |
| PGID_CPU); |
| |
| ocelot_apply_bridge_fwd_mask(ocelot, true); |
| |
| mutex_unlock(&ocelot->fwd_domain_lock); |
| } |
| |
| /* Set up a VCAP IS2 rule for delivering PTP frames to the CPU port module. |
| * If the quirk_no_xtr_irq is in place, then also copy those PTP frames to the |
| * tag_8021q CPU port. |
| */ |
| static int felix_setup_mmio_filtering(struct felix *felix) |
| { |
| unsigned long user_ports = dsa_user_ports(felix->ds); |
| struct ocelot_vcap_filter *redirect_rule; |
| struct ocelot_vcap_filter *tagging_rule; |
| struct ocelot *ocelot = &felix->ocelot; |
| struct dsa_switch *ds = felix->ds; |
| int cpu = -1, port, ret; |
| |
| tagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL); |
| if (!tagging_rule) |
| return -ENOMEM; |
| |
| redirect_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL); |
| if (!redirect_rule) { |
| kfree(tagging_rule); |
| return -ENOMEM; |
| } |
| |
| for (port = 0; port < ocelot->num_phys_ports; port++) { |
| if (dsa_is_cpu_port(ds, port)) { |
| cpu = port; |
| break; |
| } |
| } |
| |
| if (cpu < 0) { |
| kfree(tagging_rule); |
| kfree(redirect_rule); |
| return -EINVAL; |
| } |
| |
| tagging_rule->key_type = OCELOT_VCAP_KEY_ETYPE; |
| *(__be16 *)tagging_rule->key.etype.etype.value = htons(ETH_P_1588); |
| *(__be16 *)tagging_rule->key.etype.etype.mask = htons(0xffff); |
| tagging_rule->ingress_port_mask = user_ports; |
| tagging_rule->prio = 1; |
| tagging_rule->id.cookie = ocelot->num_phys_ports; |
| tagging_rule->id.tc_offload = false; |
| tagging_rule->block_id = VCAP_IS1; |
| tagging_rule->type = OCELOT_VCAP_FILTER_OFFLOAD; |
| tagging_rule->lookup = 0; |
| tagging_rule->action.pag_override_mask = 0xff; |
| tagging_rule->action.pag_val = ocelot->num_phys_ports; |
| |
| ret = ocelot_vcap_filter_add(ocelot, tagging_rule, NULL); |
| if (ret) { |
| kfree(tagging_rule); |
| kfree(redirect_rule); |
| return ret; |
| } |
| |
| redirect_rule->key_type = OCELOT_VCAP_KEY_ANY; |
| redirect_rule->ingress_port_mask = user_ports; |
| redirect_rule->pag = ocelot->num_phys_ports; |
| redirect_rule->prio = 1; |
| redirect_rule->id.cookie = ocelot->num_phys_ports; |
| redirect_rule->id.tc_offload = false; |
| redirect_rule->block_id = VCAP_IS2; |
| redirect_rule->type = OCELOT_VCAP_FILTER_OFFLOAD; |
| redirect_rule->lookup = 0; |
| redirect_rule->action.cpu_copy_ena = true; |
| if (felix->info->quirk_no_xtr_irq) { |
| /* Redirect to the tag_8021q CPU but also copy PTP packets to |
| * the CPU port module |
| */ |
| redirect_rule->action.mask_mode = OCELOT_MASK_MODE_REDIRECT; |
| redirect_rule->action.port_mask = BIT(cpu); |
| } else { |
| /* Trap PTP packets only to the CPU port module (which is |
| * redirected to the NPI port) |
| */ |
| redirect_rule->action.mask_mode = OCELOT_MASK_MODE_PERMIT_DENY; |
| redirect_rule->action.port_mask = 0; |
| } |
| |
| ret = ocelot_vcap_filter_add(ocelot, redirect_rule, NULL); |
| if (ret) { |
| ocelot_vcap_filter_del(ocelot, tagging_rule); |
| kfree(redirect_rule); |
| return ret; |
| } |
| |
| /* The ownership of the CPU port module's queues might have just been |
| * transferred to the tag_8021q tagger from the NPI-based tagger. |
| * So there might still be all sorts of crap in the queues. On the |
| * other hand, the MMIO-based matching of PTP frames is very brittle, |
| * so we need to be careful that there are no extra frames to be |
| * dequeued over MMIO, since we would never know to discard them. |
| */ |
| ocelot_drain_cpu_queue(ocelot, 0); |
| |
| return 0; |
| } |
| |
| static int felix_teardown_mmio_filtering(struct felix *felix) |
| { |
| struct ocelot_vcap_filter *tagging_rule, *redirect_rule; |
| struct ocelot_vcap_block *block_vcap_is1; |
| struct ocelot_vcap_block *block_vcap_is2; |
| struct ocelot *ocelot = &felix->ocelot; |
| int err; |
| |
| block_vcap_is1 = &ocelot->block[VCAP_IS1]; |
| block_vcap_is2 = &ocelot->block[VCAP_IS2]; |
| |
| tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is1, |
| ocelot->num_phys_ports, |
| false); |
| if (!tagging_rule) |
| return -ENOENT; |
| |
| err = ocelot_vcap_filter_del(ocelot, tagging_rule); |
| if (err) |
| return err; |
| |
| redirect_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is2, |
| ocelot->num_phys_ports, |
| false); |
| if (!redirect_rule) |
| return -ENOENT; |
| |
| return ocelot_vcap_filter_del(ocelot, redirect_rule); |
| } |
| |
| static int felix_setup_tag_8021q(struct dsa_switch *ds, int cpu) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| unsigned long cpu_flood; |
| int port, err; |
| |
| felix_8021q_cpu_port_init(ocelot, cpu); |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| if (dsa_is_unused_port(ds, port)) |
| continue; |
| |
| /* This overwrites ocelot_init(): |
| * Do not forward BPDU frames to the CPU port module, |
| * for 2 reasons: |
| * - When these packets are injected from the tag_8021q |
| * CPU port, we want them to go out, not loop back |
| * into the system. |
| * - STP traffic ingressing on a user port should go to |
| * the tag_8021q CPU port, not to the hardware CPU |
| * port module. |
| */ |
| ocelot_write_gix(ocelot, |
| ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA(0), |
| ANA_PORT_CPU_FWD_BPDU_CFG, port); |
| } |
| |
| /* In tag_8021q mode, the CPU port module is unused, except for PTP |
| * frames. So we want to disable flooding of any kind to the CPU port |
| * module, since packets going there will end in a black hole. |
| */ |
| cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)); |
| ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_UC); |
| ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_MC); |
| ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_BC); |
| |
| err = dsa_tag_8021q_register(ds, htons(ETH_P_8021AD)); |
| if (err) |
| return err; |
| |
| err = felix_setup_mmio_filtering(felix); |
| if (err) |
| goto out_tag_8021q_unregister; |
| |
| return 0; |
| |
| out_tag_8021q_unregister: |
| dsa_tag_8021q_unregister(ds); |
| return err; |
| } |
| |
| static void felix_teardown_tag_8021q(struct dsa_switch *ds, int cpu) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| int err, port; |
| |
| err = felix_teardown_mmio_filtering(felix); |
| if (err) |
| dev_err(ds->dev, "felix_teardown_mmio_filtering returned %d", |
| err); |
| |
| dsa_tag_8021q_unregister(ds); |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| if (dsa_is_unused_port(ds, port)) |
| continue; |
| |
| /* Restore the logic from ocelot_init: |
| * do not forward BPDU frames to the front ports. |
| */ |
| ocelot_write_gix(ocelot, |
| ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA(0xffff), |
| ANA_PORT_CPU_FWD_BPDU_CFG, |
| port); |
| } |
| |
| felix_8021q_cpu_port_deinit(ocelot, cpu); |
| } |
| |
| /* The CPU port module is connected to the Node Processor Interface (NPI). This |
| * is the mode through which frames can be injected from and extracted to an |
| * external CPU, over Ethernet. In NXP SoCs, the "external CPU" is the ARM CPU |
| * running Linux, and this forms a DSA setup together with the enetc or fman |
| * DSA master. |
| */ |
| static void felix_npi_port_init(struct ocelot *ocelot, int port) |
| { |
| ocelot->npi = port; |
| |
| ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | |
| QSYS_EXT_CPU_CFG_EXT_CPU_PORT(port), |
| QSYS_EXT_CPU_CFG); |
| |
| /* NPI port Injection/Extraction configuration */ |
| ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR, |
| ocelot->npi_xtr_prefix); |
| ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR, |
| ocelot->npi_inj_prefix); |
| |
| /* Disable transmission of pause frames */ |
| ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0); |
| } |
| |
| static void felix_npi_port_deinit(struct ocelot *ocelot, int port) |
| { |
| /* Restore hardware defaults */ |
| int unused_port = ocelot->num_phys_ports + 2; |
| |
| ocelot->npi = -1; |
| |
| ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPU_PORT(unused_port), |
| QSYS_EXT_CPU_CFG); |
| |
| ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR, |
| OCELOT_TAG_PREFIX_DISABLED); |
| ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR, |
| OCELOT_TAG_PREFIX_DISABLED); |
| |
| /* Enable transmission of pause frames */ |
| ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 1); |
| } |
| |
| static int felix_setup_tag_npi(struct dsa_switch *ds, int cpu) |
| { |
| struct ocelot *ocelot = ds->priv; |
| unsigned long cpu_flood; |
| |
| felix_npi_port_init(ocelot, cpu); |
| |
| /* Include the CPU port module (and indirectly, the NPI port) |
| * in the forwarding mask for unknown unicast - the hardware |
| * default value for ANA_FLOODING_FLD_UNICAST excludes |
| * BIT(ocelot->num_phys_ports), and so does ocelot_init, |
| * since Ocelot relies on whitelisting MAC addresses towards |
| * PGID_CPU. |
| * We do this because DSA does not yet perform RX filtering, |
| * and the NPI port does not perform source address learning, |
| * so traffic sent to Linux is effectively unknown from the |
| * switch's perspective. |
| */ |
| cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)); |
| ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_UC); |
| ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_MC); |
| ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_BC); |
| |
| return 0; |
| } |
| |
| static void felix_teardown_tag_npi(struct dsa_switch *ds, int cpu) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| felix_npi_port_deinit(ocelot, cpu); |
| } |
| |
| static int felix_set_tag_protocol(struct dsa_switch *ds, int cpu, |
| enum dsa_tag_protocol proto) |
| { |
| int err; |
| |
| switch (proto) { |
| case DSA_TAG_PROTO_SEVILLE: |
| case DSA_TAG_PROTO_OCELOT: |
| err = felix_setup_tag_npi(ds, cpu); |
| break; |
| case DSA_TAG_PROTO_OCELOT_8021Q: |
| err = felix_setup_tag_8021q(ds, cpu); |
| break; |
| default: |
| err = -EPROTONOSUPPORT; |
| } |
| |
| return err; |
| } |
| |
| static void felix_del_tag_protocol(struct dsa_switch *ds, int cpu, |
| enum dsa_tag_protocol proto) |
| { |
| switch (proto) { |
| case DSA_TAG_PROTO_SEVILLE: |
| case DSA_TAG_PROTO_OCELOT: |
| felix_teardown_tag_npi(ds, cpu); |
| break; |
| case DSA_TAG_PROTO_OCELOT_8021Q: |
| felix_teardown_tag_8021q(ds, cpu); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* This always leaves the switch in a consistent state, because although the |
| * tag_8021q setup can fail, the NPI setup can't. So either the change is made, |
| * or the restoration is guaranteed to work. |
| */ |
| static int felix_change_tag_protocol(struct dsa_switch *ds, int cpu, |
| enum dsa_tag_protocol proto) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| enum dsa_tag_protocol old_proto = felix->tag_proto; |
| int err; |
| |
| if (proto != DSA_TAG_PROTO_SEVILLE && |
| proto != DSA_TAG_PROTO_OCELOT && |
| proto != DSA_TAG_PROTO_OCELOT_8021Q) |
| return -EPROTONOSUPPORT; |
| |
| felix_del_tag_protocol(ds, cpu, old_proto); |
| |
| err = felix_set_tag_protocol(ds, cpu, proto); |
| if (err) { |
| felix_set_tag_protocol(ds, cpu, old_proto); |
| return err; |
| } |
| |
| felix->tag_proto = proto; |
| |
| return 0; |
| } |
| |
| static enum dsa_tag_protocol felix_get_tag_protocol(struct dsa_switch *ds, |
| int port, |
| enum dsa_tag_protocol mp) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| |
| return felix->tag_proto; |
| } |
| |
| static int felix_set_ageing_time(struct dsa_switch *ds, |
| unsigned int ageing_time) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_set_ageing_time(ocelot, ageing_time); |
| |
| return 0; |
| } |
| |
| static void felix_port_fast_age(struct dsa_switch *ds, int port) |
| { |
| struct ocelot *ocelot = ds->priv; |
| int err; |
| |
| err = ocelot_mact_flush(ocelot, port); |
| if (err) |
| dev_err(ds->dev, "Flushing MAC table on port %d returned %pe\n", |
| port, ERR_PTR(err)); |
| } |
| |
| static int felix_fdb_dump(struct dsa_switch *ds, int port, |
| dsa_fdb_dump_cb_t *cb, void *data) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_fdb_dump(ocelot, port, cb, data); |
| } |
| |
| static int felix_fdb_add(struct dsa_switch *ds, int port, |
| const unsigned char *addr, u16 vid) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_fdb_add(ocelot, port, addr, vid); |
| } |
| |
| static int felix_fdb_del(struct dsa_switch *ds, int port, |
| const unsigned char *addr, u16 vid) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_fdb_del(ocelot, port, addr, vid); |
| } |
| |
| static int felix_mdb_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_port_mdb_add(ocelot, port, mdb); |
| } |
| |
| static int felix_mdb_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_port_mdb_del(ocelot, port, mdb); |
| } |
| |
| static void felix_bridge_stp_state_set(struct dsa_switch *ds, int port, |
| u8 state) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_bridge_stp_state_set(ocelot, port, state); |
| } |
| |
| static int felix_pre_bridge_flags(struct dsa_switch *ds, int port, |
| struct switchdev_brport_flags val, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_port_pre_bridge_flags(ocelot, port, val); |
| } |
| |
| static int felix_bridge_flags(struct dsa_switch *ds, int port, |
| struct switchdev_brport_flags val, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_bridge_flags(ocelot, port, val); |
| |
| return 0; |
| } |
| |
| static int felix_bridge_join(struct dsa_switch *ds, int port, |
| struct dsa_bridge bridge, bool *tx_fwd_offload) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_bridge_join(ocelot, port, bridge.dev); |
| |
| return 0; |
| } |
| |
| static void felix_bridge_leave(struct dsa_switch *ds, int port, |
| struct dsa_bridge bridge) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_bridge_leave(ocelot, port, bridge.dev); |
| } |
| |
| static int felix_lag_join(struct dsa_switch *ds, int port, |
| struct net_device *bond, |
| struct netdev_lag_upper_info *info) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_port_lag_join(ocelot, port, bond, info); |
| } |
| |
| static int felix_lag_leave(struct dsa_switch *ds, int port, |
| struct net_device *bond) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_lag_leave(ocelot, port, bond); |
| |
| return 0; |
| } |
| |
| static int felix_lag_change(struct dsa_switch *ds, int port) |
| { |
| struct dsa_port *dp = dsa_to_port(ds, port); |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_lag_change(ocelot, port, dp->lag_tx_enabled); |
| |
| return 0; |
| } |
| |
| static int felix_vlan_prepare(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_vlan *vlan, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| u16 flags = vlan->flags; |
| |
| /* Ocelot switches copy frames as-is to the CPU, so the flags: |
| * egress-untagged or not, pvid or not, make no difference. This |
| * behavior is already better than what DSA just tries to approximate |
| * when it installs the VLAN with the same flags on the CPU port. |
| * Just accept any configuration, and don't let ocelot deny installing |
| * multiple native VLANs on the NPI port, because the switch doesn't |
| * look at the port tag settings towards the NPI interface anyway. |
| */ |
| if (port == ocelot->npi) |
| return 0; |
| |
| return ocelot_vlan_prepare(ocelot, port, vlan->vid, |
| flags & BRIDGE_VLAN_INFO_PVID, |
| flags & BRIDGE_VLAN_INFO_UNTAGGED, |
| extack); |
| } |
| |
| static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_port_vlan_filtering(ocelot, port, enabled, extack); |
| } |
| |
| static int felix_vlan_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_vlan *vlan, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| u16 flags = vlan->flags; |
| int err; |
| |
| err = felix_vlan_prepare(ds, port, vlan, extack); |
| if (err) |
| return err; |
| |
| return ocelot_vlan_add(ocelot, port, vlan->vid, |
| flags & BRIDGE_VLAN_INFO_PVID, |
| flags & BRIDGE_VLAN_INFO_UNTAGGED); |
| } |
| |
| static int felix_vlan_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_vlan *vlan) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_vlan_del(ocelot, port, vlan->vid); |
| } |
| |
| static void felix_phylink_validate(struct dsa_switch *ds, int port, |
| unsigned long *supported, |
| struct phylink_link_state *state) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| |
| if (felix->info->phylink_validate) |
| felix->info->phylink_validate(ocelot, port, supported, state); |
| } |
| |
| static void felix_phylink_mac_config(struct dsa_switch *ds, int port, |
| unsigned int link_an_mode, |
| const struct phylink_link_state *state) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| struct dsa_port *dp = dsa_to_port(ds, port); |
| |
| if (felix->pcs && felix->pcs[port]) |
| phylink_set_pcs(dp->pl, felix->pcs[port]); |
| } |
| |
| static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port, |
| unsigned int link_an_mode, |
| phy_interface_t interface) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_phylink_mac_link_down(ocelot, port, link_an_mode, interface, |
| FELIX_MAC_QUIRKS); |
| } |
| |
| static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port, |
| unsigned int link_an_mode, |
| phy_interface_t interface, |
| struct phy_device *phydev, |
| int speed, int duplex, |
| bool tx_pause, bool rx_pause) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| |
| ocelot_phylink_mac_link_up(ocelot, port, phydev, link_an_mode, |
| interface, speed, duplex, tx_pause, rx_pause, |
| FELIX_MAC_QUIRKS); |
| |
| if (felix->info->port_sched_speed_set) |
| felix->info->port_sched_speed_set(ocelot, port, speed); |
| } |
| |
| static void felix_port_qos_map_init(struct ocelot *ocelot, int port) |
| { |
| int i; |
| |
| ocelot_rmw_gix(ocelot, |
| ANA_PORT_QOS_CFG_QOS_PCP_ENA, |
| ANA_PORT_QOS_CFG_QOS_PCP_ENA, |
| ANA_PORT_QOS_CFG, |
| port); |
| |
| for (i = 0; i < OCELOT_NUM_TC * 2; i++) { |
| ocelot_rmw_ix(ocelot, |
| (ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL & i) | |
| ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(i), |
| ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL | |
| ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL_M, |
| ANA_PORT_PCP_DEI_MAP, |
| port, i); |
| } |
| } |
| |
| static void felix_get_strings(struct dsa_switch *ds, int port, |
| u32 stringset, u8 *data) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_get_strings(ocelot, port, stringset, data); |
| } |
| |
| static void felix_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_get_ethtool_stats(ocelot, port, data); |
| } |
| |
| static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_get_sset_count(ocelot, port, sset); |
| } |
| |
| static int felix_get_ts_info(struct dsa_switch *ds, int port, |
| struct ethtool_ts_info *info) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_get_ts_info(ocelot, port, info); |
| } |
| |
| static int felix_parse_ports_node(struct felix *felix, |
| struct device_node *ports_node, |
| phy_interface_t *port_phy_modes) |
| { |
| struct ocelot *ocelot = &felix->ocelot; |
| struct device *dev = felix->ocelot.dev; |
| struct device_node *child; |
| |
| for_each_available_child_of_node(ports_node, child) { |
| phy_interface_t phy_mode; |
| u32 port; |
| int err; |
| |
| /* Get switch port number from DT */ |
| if (of_property_read_u32(child, "reg", &port) < 0) { |
| dev_err(dev, "Port number not defined in device tree " |
| "(property \"reg\")\n"); |
| of_node_put(child); |
| return -ENODEV; |
| } |
| |
| /* Get PHY mode from DT */ |
| err = of_get_phy_mode(child, &phy_mode); |
| if (err) { |
| dev_err(dev, "Failed to read phy-mode or " |
| "phy-interface-type property for port %d\n", |
| port); |
| of_node_put(child); |
| return -ENODEV; |
| } |
| |
| err = felix->info->prevalidate_phy_mode(ocelot, port, phy_mode); |
| if (err < 0) { |
| dev_err(dev, "Unsupported PHY mode %s on port %d\n", |
| phy_modes(phy_mode), port); |
| of_node_put(child); |
| return err; |
| } |
| |
| port_phy_modes[port] = phy_mode; |
| } |
| |
| return 0; |
| } |
| |
| static int felix_parse_dt(struct felix *felix, phy_interface_t *port_phy_modes) |
| { |
| struct device *dev = felix->ocelot.dev; |
| struct device_node *switch_node; |
| struct device_node *ports_node; |
| int err; |
| |
| switch_node = dev->of_node; |
| |
| ports_node = of_get_child_by_name(switch_node, "ports"); |
| if (!ports_node) |
| ports_node = of_get_child_by_name(switch_node, "ethernet-ports"); |
| if (!ports_node) { |
| dev_err(dev, "Incorrect bindings: absent \"ports\" or \"ethernet-ports\" node\n"); |
| return -ENODEV; |
| } |
| |
| err = felix_parse_ports_node(felix, ports_node, port_phy_modes); |
| of_node_put(ports_node); |
| |
| return err; |
| } |
| |
| static int felix_init_structs(struct felix *felix, int num_phys_ports) |
| { |
| struct ocelot *ocelot = &felix->ocelot; |
| phy_interface_t *port_phy_modes; |
| struct resource res; |
| int port, i, err; |
| |
| ocelot->num_phys_ports = num_phys_ports; |
| ocelot->ports = devm_kcalloc(ocelot->dev, num_phys_ports, |
| sizeof(struct ocelot_port *), GFP_KERNEL); |
| if (!ocelot->ports) |
| return -ENOMEM; |
| |
| ocelot->map = felix->info->map; |
| ocelot->stats_layout = felix->info->stats_layout; |
| ocelot->num_stats = felix->info->num_stats; |
| ocelot->num_mact_rows = felix->info->num_mact_rows; |
| ocelot->vcap = felix->info->vcap; |
| ocelot->vcap_pol.base = felix->info->vcap_pol_base; |
| ocelot->vcap_pol.max = felix->info->vcap_pol_max; |
| ocelot->vcap_pol.base2 = felix->info->vcap_pol_base2; |
| ocelot->vcap_pol.max2 = felix->info->vcap_pol_max2; |
| ocelot->ops = felix->info->ops; |
| ocelot->npi_inj_prefix = OCELOT_TAG_PREFIX_SHORT; |
| ocelot->npi_xtr_prefix = OCELOT_TAG_PREFIX_SHORT; |
| ocelot->devlink = felix->ds->devlink; |
| |
| port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t), |
| GFP_KERNEL); |
| if (!port_phy_modes) |
| return -ENOMEM; |
| |
| err = felix_parse_dt(felix, port_phy_modes); |
| if (err) { |
| kfree(port_phy_modes); |
| return err; |
| } |
| |
| for (i = 0; i < TARGET_MAX; i++) { |
| struct regmap *target; |
| |
| if (!felix->info->target_io_res[i].name) |
| continue; |
| |
| memcpy(&res, &felix->info->target_io_res[i], sizeof(res)); |
| res.flags = IORESOURCE_MEM; |
| res.start += felix->switch_base; |
| res.end += felix->switch_base; |
| |
| target = felix->info->init_regmap(ocelot, &res); |
| if (IS_ERR(target)) { |
| dev_err(ocelot->dev, |
| "Failed to map device memory space\n"); |
| kfree(port_phy_modes); |
| return PTR_ERR(target); |
| } |
| |
| ocelot->targets[i] = target; |
| } |
| |
| err = ocelot_regfields_init(ocelot, felix->info->regfields); |
| if (err) { |
| dev_err(ocelot->dev, "failed to init reg fields map\n"); |
| kfree(port_phy_modes); |
| return err; |
| } |
| |
| for (port = 0; port < num_phys_ports; port++) { |
| struct ocelot_port *ocelot_port; |
| struct regmap *target; |
| |
| ocelot_port = devm_kzalloc(ocelot->dev, |
| sizeof(struct ocelot_port), |
| GFP_KERNEL); |
| if (!ocelot_port) { |
| dev_err(ocelot->dev, |
| "failed to allocate port memory\n"); |
| kfree(port_phy_modes); |
| return -ENOMEM; |
| } |
| |
| memcpy(&res, &felix->info->port_io_res[port], sizeof(res)); |
| res.flags = IORESOURCE_MEM; |
| res.start += felix->switch_base; |
| res.end += felix->switch_base; |
| |
| target = felix->info->init_regmap(ocelot, &res); |
| if (IS_ERR(target)) { |
| dev_err(ocelot->dev, |
| "Failed to map memory space for port %d\n", |
| port); |
| kfree(port_phy_modes); |
| return PTR_ERR(target); |
| } |
| |
| ocelot_port->phy_mode = port_phy_modes[port]; |
| ocelot_port->ocelot = ocelot; |
| ocelot_port->target = target; |
| ocelot->ports[port] = ocelot_port; |
| } |
| |
| kfree(port_phy_modes); |
| |
| if (felix->info->mdio_bus_alloc) { |
| err = felix->info->mdio_bus_alloc(ocelot); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void ocelot_port_purge_txtstamp_skb(struct ocelot *ocelot, int port, |
| struct sk_buff *skb) |
| { |
| struct ocelot_port *ocelot_port = ocelot->ports[port]; |
| struct sk_buff *clone = OCELOT_SKB_CB(skb)->clone; |
| struct sk_buff *skb_match = NULL, *skb_tmp; |
| unsigned long flags; |
| |
| if (!clone) |
| return; |
| |
| spin_lock_irqsave(&ocelot_port->tx_skbs.lock, flags); |
| |
| skb_queue_walk_safe(&ocelot_port->tx_skbs, skb, skb_tmp) { |
| if (skb != clone) |
| continue; |
| __skb_unlink(skb, &ocelot_port->tx_skbs); |
| skb_match = skb; |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ocelot_port->tx_skbs.lock, flags); |
| |
| WARN_ONCE(!skb_match, |
| "Could not find skb clone in TX timestamping list\n"); |
| } |
| |
| #define work_to_xmit_work(w) \ |
| container_of((w), struct felix_deferred_xmit_work, work) |
| |
| static void felix_port_deferred_xmit(struct kthread_work *work) |
| { |
| struct felix_deferred_xmit_work *xmit_work = work_to_xmit_work(work); |
| struct dsa_switch *ds = xmit_work->dp->ds; |
| struct sk_buff *skb = xmit_work->skb; |
| u32 rew_op = ocelot_ptp_rew_op(skb); |
| struct ocelot *ocelot = ds->priv; |
| int port = xmit_work->dp->index; |
| int retries = 10; |
| |
| do { |
| if (ocelot_can_inject(ocelot, 0)) |
| break; |
| |
| cpu_relax(); |
| } while (--retries); |
| |
| if (!retries) { |
| dev_err(ocelot->dev, "port %d failed to inject skb\n", |
| port); |
| ocelot_port_purge_txtstamp_skb(ocelot, port, skb); |
| kfree_skb(skb); |
| return; |
| } |
| |
| ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb); |
| |
| consume_skb(skb); |
| kfree(xmit_work); |
| } |
| |
| static int felix_connect_tag_protocol(struct dsa_switch *ds, |
| enum dsa_tag_protocol proto) |
| { |
| struct ocelot_8021q_tagger_data *tagger_data; |
| |
| switch (proto) { |
| case DSA_TAG_PROTO_OCELOT_8021Q: |
| tagger_data = ocelot_8021q_tagger_data(ds); |
| tagger_data->xmit_work_fn = felix_port_deferred_xmit; |
| return 0; |
| case DSA_TAG_PROTO_OCELOT: |
| case DSA_TAG_PROTO_SEVILLE: |
| return 0; |
| default: |
| return -EPROTONOSUPPORT; |
| } |
| } |
| |
| /* Hardware initialization done here so that we can allocate structures with |
| * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing |
| * us to allocate structures twice (leak memory) and map PCI memory twice |
| * (which will not work). |
| */ |
| static int felix_setup(struct dsa_switch *ds) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| int port, err; |
| |
| err = felix_init_structs(felix, ds->num_ports); |
| if (err) |
| return err; |
| |
| err = ocelot_init(ocelot); |
| if (err) |
| goto out_mdiobus_free; |
| |
| if (ocelot->ptp) { |
| err = ocelot_init_timestamp(ocelot, felix->info->ptp_caps); |
| if (err) { |
| dev_err(ocelot->dev, |
| "Timestamp initialization failed\n"); |
| ocelot->ptp = 0; |
| } |
| } |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| if (dsa_is_unused_port(ds, port)) |
| continue; |
| |
| ocelot_init_port(ocelot, port); |
| |
| /* Set the default QoS Classification based on PCP and DEI |
| * bits of vlan tag. |
| */ |
| felix_port_qos_map_init(ocelot, port); |
| } |
| |
| err = ocelot_devlink_sb_register(ocelot); |
| if (err) |
| goto out_deinit_ports; |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| if (!dsa_is_cpu_port(ds, port)) |
| continue; |
| |
| /* The initial tag protocol is NPI which always returns 0, so |
| * there's no real point in checking for errors. |
| */ |
| felix_set_tag_protocol(ds, port, felix->tag_proto); |
| break; |
| } |
| |
| ds->mtu_enforcement_ingress = true; |
| ds->assisted_learning_on_cpu_port = true; |
| |
| return 0; |
| |
| out_deinit_ports: |
| for (port = 0; port < ocelot->num_phys_ports; port++) { |
| if (dsa_is_unused_port(ds, port)) |
| continue; |
| |
| ocelot_deinit_port(ocelot, port); |
| } |
| |
| ocelot_deinit_timestamp(ocelot); |
| ocelot_deinit(ocelot); |
| |
| out_mdiobus_free: |
| if (felix->info->mdio_bus_free) |
| felix->info->mdio_bus_free(ocelot); |
| |
| return err; |
| } |
| |
| static void felix_teardown(struct dsa_switch *ds) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| int port; |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| if (!dsa_is_cpu_port(ds, port)) |
| continue; |
| |
| felix_del_tag_protocol(ds, port, felix->tag_proto); |
| break; |
| } |
| |
| for (port = 0; port < ocelot->num_phys_ports; port++) { |
| if (dsa_is_unused_port(ds, port)) |
| continue; |
| |
| ocelot_deinit_port(ocelot, port); |
| } |
| |
| ocelot_devlink_sb_unregister(ocelot); |
| ocelot_deinit_timestamp(ocelot); |
| ocelot_deinit(ocelot); |
| |
| if (felix->info->mdio_bus_free) |
| felix->info->mdio_bus_free(ocelot); |
| } |
| |
| static int felix_hwtstamp_get(struct dsa_switch *ds, int port, |
| struct ifreq *ifr) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_hwstamp_get(ocelot, port, ifr); |
| } |
| |
| static int felix_hwtstamp_set(struct dsa_switch *ds, int port, |
| struct ifreq *ifr) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_hwstamp_set(ocelot, port, ifr); |
| } |
| |
| static bool felix_check_xtr_pkt(struct ocelot *ocelot, unsigned int ptp_type) |
| { |
| struct felix *felix = ocelot_to_felix(ocelot); |
| int err, grp = 0; |
| |
| if (felix->tag_proto != DSA_TAG_PROTO_OCELOT_8021Q) |
| return false; |
| |
| if (!felix->info->quirk_no_xtr_irq) |
| return false; |
| |
| if (ptp_type == PTP_CLASS_NONE) |
| return false; |
| |
| while (ocelot_read(ocelot, QS_XTR_DATA_PRESENT) & BIT(grp)) { |
| struct sk_buff *skb; |
| unsigned int type; |
| |
| err = ocelot_xtr_poll_frame(ocelot, grp, &skb); |
| if (err) |
| goto out; |
| |
| /* We trap to the CPU port module all PTP frames, but |
| * felix_rxtstamp() only gets called for event frames. |
| * So we need to avoid sending duplicate general |
| * message frames by running a second BPF classifier |
| * here and dropping those. |
| */ |
| __skb_push(skb, ETH_HLEN); |
| |
| type = ptp_classify_raw(skb); |
| |
| __skb_pull(skb, ETH_HLEN); |
| |
| if (type == PTP_CLASS_NONE) { |
| kfree_skb(skb); |
| continue; |
| } |
| |
| netif_rx(skb); |
| } |
| |
| out: |
| if (err < 0) |
| ocelot_drain_cpu_queue(ocelot, 0); |
| |
| return true; |
| } |
| |
| static bool felix_rxtstamp(struct dsa_switch *ds, int port, |
| struct sk_buff *skb, unsigned int type) |
| { |
| u32 tstamp_lo = OCELOT_SKB_CB(skb)->tstamp_lo; |
| struct skb_shared_hwtstamps *shhwtstamps; |
| struct ocelot *ocelot = ds->priv; |
| struct timespec64 ts; |
| u32 tstamp_hi; |
| u64 tstamp; |
| |
| /* If the "no XTR IRQ" workaround is in use, tell DSA to defer this skb |
| * for RX timestamping. Then free it, and poll for its copy through |
| * MMIO in the CPU port module, and inject that into the stack from |
| * ocelot_xtr_poll(). |
| */ |
| if (felix_check_xtr_pkt(ocelot, type)) { |
| kfree_skb(skb); |
| return true; |
| } |
| |
| ocelot_ptp_gettime64(&ocelot->ptp_info, &ts); |
| tstamp = ktime_set(ts.tv_sec, ts.tv_nsec); |
| |
| tstamp_hi = tstamp >> 32; |
| if ((tstamp & 0xffffffff) < tstamp_lo) |
| tstamp_hi--; |
| |
| tstamp = ((u64)tstamp_hi << 32) | tstamp_lo; |
| |
| shhwtstamps = skb_hwtstamps(skb); |
| memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps)); |
| shhwtstamps->hwtstamp = tstamp; |
| return false; |
| } |
| |
| static void felix_txtstamp(struct dsa_switch *ds, int port, |
| struct sk_buff *skb) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct sk_buff *clone = NULL; |
| |
| if (!ocelot->ptp) |
| return; |
| |
| if (ocelot_port_txtstamp_request(ocelot, port, skb, &clone)) { |
| dev_err_ratelimited(ds->dev, |
| "port %d delivering skb without TX timestamp\n", |
| port); |
| return; |
| } |
| |
| if (clone) |
| OCELOT_SKB_CB(skb)->clone = clone; |
| } |
| |
| static int felix_change_mtu(struct dsa_switch *ds, int port, int new_mtu) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_set_maxlen(ocelot, port, new_mtu); |
| |
| return 0; |
| } |
| |
| static int felix_get_max_mtu(struct dsa_switch *ds, int port) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_get_max_mtu(ocelot, port); |
| } |
| |
| static int felix_cls_flower_add(struct dsa_switch *ds, int port, |
| struct flow_cls_offload *cls, bool ingress) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_cls_flower_replace(ocelot, port, cls, ingress); |
| } |
| |
| static int felix_cls_flower_del(struct dsa_switch *ds, int port, |
| struct flow_cls_offload *cls, bool ingress) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_cls_flower_destroy(ocelot, port, cls, ingress); |
| } |
| |
| static int felix_cls_flower_stats(struct dsa_switch *ds, int port, |
| struct flow_cls_offload *cls, bool ingress) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_cls_flower_stats(ocelot, port, cls, ingress); |
| } |
| |
| static int felix_port_policer_add(struct dsa_switch *ds, int port, |
| struct dsa_mall_policer_tc_entry *policer) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct ocelot_policer pol = { |
| .rate = div_u64(policer->rate_bytes_per_sec, 1000) * 8, |
| .burst = policer->burst, |
| }; |
| |
| return ocelot_port_policer_add(ocelot, port, &pol); |
| } |
| |
| static void felix_port_policer_del(struct dsa_switch *ds, int port) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| ocelot_port_policer_del(ocelot, port); |
| } |
| |
| static int felix_port_setup_tc(struct dsa_switch *ds, int port, |
| enum tc_setup_type type, |
| void *type_data) |
| { |
| struct ocelot *ocelot = ds->priv; |
| struct felix *felix = ocelot_to_felix(ocelot); |
| |
| if (felix->info->port_setup_tc) |
| return felix->info->port_setup_tc(ds, port, type, type_data); |
| else |
| return -EOPNOTSUPP; |
| } |
| |
| static int felix_sb_pool_get(struct dsa_switch *ds, unsigned int sb_index, |
| u16 pool_index, |
| struct devlink_sb_pool_info *pool_info) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_pool_get(ocelot, sb_index, pool_index, pool_info); |
| } |
| |
| static int felix_sb_pool_set(struct dsa_switch *ds, unsigned int sb_index, |
| u16 pool_index, u32 size, |
| enum devlink_sb_threshold_type threshold_type, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_pool_set(ocelot, sb_index, pool_index, size, |
| threshold_type, extack); |
| } |
| |
| static int felix_sb_port_pool_get(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 pool_index, |
| u32 *p_threshold) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_port_pool_get(ocelot, port, sb_index, pool_index, |
| p_threshold); |
| } |
| |
| static int felix_sb_port_pool_set(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 pool_index, |
| u32 threshold, struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_port_pool_set(ocelot, port, sb_index, pool_index, |
| threshold, extack); |
| } |
| |
| static int felix_sb_tc_pool_bind_get(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 tc_index, |
| enum devlink_sb_pool_type pool_type, |
| u16 *p_pool_index, u32 *p_threshold) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_tc_pool_bind_get(ocelot, port, sb_index, tc_index, |
| pool_type, p_pool_index, |
| p_threshold); |
| } |
| |
| static int felix_sb_tc_pool_bind_set(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 tc_index, |
| enum devlink_sb_pool_type pool_type, |
| u16 pool_index, u32 threshold, |
| struct netlink_ext_ack *extack) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_tc_pool_bind_set(ocelot, port, sb_index, tc_index, |
| pool_type, pool_index, threshold, |
| extack); |
| } |
| |
| static int felix_sb_occ_snapshot(struct dsa_switch *ds, |
| unsigned int sb_index) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_occ_snapshot(ocelot, sb_index); |
| } |
| |
| static int felix_sb_occ_max_clear(struct dsa_switch *ds, |
| unsigned int sb_index) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_occ_max_clear(ocelot, sb_index); |
| } |
| |
| static int felix_sb_occ_port_pool_get(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 pool_index, |
| u32 *p_cur, u32 *p_max) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_occ_port_pool_get(ocelot, port, sb_index, pool_index, |
| p_cur, p_max); |
| } |
| |
| static int felix_sb_occ_tc_port_bind_get(struct dsa_switch *ds, int port, |
| unsigned int sb_index, u16 tc_index, |
| enum devlink_sb_pool_type pool_type, |
| u32 *p_cur, u32 *p_max) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_sb_occ_tc_port_bind_get(ocelot, port, sb_index, tc_index, |
| pool_type, p_cur, p_max); |
| } |
| |
| static int felix_mrp_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_mrp *mrp) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_mrp_add(ocelot, port, mrp); |
| } |
| |
| static int felix_mrp_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_mrp *mrp) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_mrp_add(ocelot, port, mrp); |
| } |
| |
| static int |
| felix_mrp_add_ring_role(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_ring_role_mrp *mrp) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_mrp_add_ring_role(ocelot, port, mrp); |
| } |
| |
| static int |
| felix_mrp_del_ring_role(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_ring_role_mrp *mrp) |
| { |
| struct ocelot *ocelot = ds->priv; |
| |
| return ocelot_mrp_del_ring_role(ocelot, port, mrp); |
| } |
| |
| const struct dsa_switch_ops felix_switch_ops = { |
| .get_tag_protocol = felix_get_tag_protocol, |
| .change_tag_protocol = felix_change_tag_protocol, |
| .connect_tag_protocol = felix_connect_tag_protocol, |
| .setup = felix_setup, |
| .teardown = felix_teardown, |
| .set_ageing_time = felix_set_ageing_time, |
| .get_strings = felix_get_strings, |
| .get_ethtool_stats = felix_get_ethtool_stats, |
| .get_sset_count = felix_get_sset_count, |
| .get_ts_info = felix_get_ts_info, |
| .phylink_validate = felix_phylink_validate, |
| .phylink_mac_config = felix_phylink_mac_config, |
| .phylink_mac_link_down = felix_phylink_mac_link_down, |
| .phylink_mac_link_up = felix_phylink_mac_link_up, |
| .port_fast_age = felix_port_fast_age, |
| .port_fdb_dump = felix_fdb_dump, |
| .port_fdb_add = felix_fdb_add, |
| .port_fdb_del = felix_fdb_del, |
| .port_mdb_add = felix_mdb_add, |
| .port_mdb_del = felix_mdb_del, |
| .port_pre_bridge_flags = felix_pre_bridge_flags, |
| .port_bridge_flags = felix_bridge_flags, |
| .port_bridge_join = felix_bridge_join, |
| .port_bridge_leave = felix_bridge_leave, |
| .port_lag_join = felix_lag_join, |
| .port_lag_leave = felix_lag_leave, |
| .port_lag_change = felix_lag_change, |
| .port_stp_state_set = felix_bridge_stp_state_set, |
| .port_vlan_filtering = felix_vlan_filtering, |
| .port_vlan_add = felix_vlan_add, |
| .port_vlan_del = felix_vlan_del, |
| .port_hwtstamp_get = felix_hwtstamp_get, |
| .port_hwtstamp_set = felix_hwtstamp_set, |
| .port_rxtstamp = felix_rxtstamp, |
| .port_txtstamp = felix_txtstamp, |
| .port_change_mtu = felix_change_mtu, |
| .port_max_mtu = felix_get_max_mtu, |
| .port_policer_add = felix_port_policer_add, |
| .port_policer_del = felix_port_policer_del, |
| .cls_flower_add = felix_cls_flower_add, |
| .cls_flower_del = felix_cls_flower_del, |
| .cls_flower_stats = felix_cls_flower_stats, |
| .port_setup_tc = felix_port_setup_tc, |
| .devlink_sb_pool_get = felix_sb_pool_get, |
| .devlink_sb_pool_set = felix_sb_pool_set, |
| .devlink_sb_port_pool_get = felix_sb_port_pool_get, |
| .devlink_sb_port_pool_set = felix_sb_port_pool_set, |
| .devlink_sb_tc_pool_bind_get = felix_sb_tc_pool_bind_get, |
| .devlink_sb_tc_pool_bind_set = felix_sb_tc_pool_bind_set, |
| .devlink_sb_occ_snapshot = felix_sb_occ_snapshot, |
| .devlink_sb_occ_max_clear = felix_sb_occ_max_clear, |
| .devlink_sb_occ_port_pool_get = felix_sb_occ_port_pool_get, |
| .devlink_sb_occ_tc_port_bind_get= felix_sb_occ_tc_port_bind_get, |
| .port_mrp_add = felix_mrp_add, |
| .port_mrp_del = felix_mrp_del, |
| .port_mrp_add_ring_role = felix_mrp_add_ring_role, |
| .port_mrp_del_ring_role = felix_mrp_del_ring_role, |
| .tag_8021q_vlan_add = felix_tag_8021q_vlan_add, |
| .tag_8021q_vlan_del = felix_tag_8021q_vlan_del, |
| }; |
| |
| struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port) |
| { |
| struct felix *felix = ocelot_to_felix(ocelot); |
| struct dsa_switch *ds = felix->ds; |
| |
| if (!dsa_is_user_port(ds, port)) |
| return NULL; |
| |
| return dsa_to_port(ds, port)->slave; |
| } |
| |
| int felix_netdev_to_port(struct net_device *dev) |
| { |
| struct dsa_port *dp; |
| |
| dp = dsa_port_from_netdev(dev); |
| if (IS_ERR(dp)) |
| return -EINVAL; |
| |
| return dp->index; |
| } |