Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 9b31104..b881a7b1 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -250,10 +250,6 @@
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
- /* Workaround only required for 100Mbits/sec capable PHYs */
- if (phydev->supported & PHY_GBIT_FEATURES)
- return 0;
-
/* set shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
@@ -270,7 +266,7 @@
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
/* reset shadow mode 2 */
- ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
if (ret < 0)
return ret;
@@ -307,11 +303,6 @@
return 0;
}
-static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
-{
- return 0;
-}
-
#define BCM7XXX_28NM_GPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -351,31 +342,7 @@
BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
-{
- .phy_id = PHY_BCM_OUI_4,
- .phy_id_mask = 0xffff0000,
- .name = "Broadcom BCM7XXX 40nm",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_config_init,
-}, {
- .phy_id = PHY_BCM_OUI_5,
- .phy_id_mask = 0xffffff00,
- .name = "Broadcom BCM7XXX 65nm",
- .features = PHY_BASIC_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_dummy_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_config_init,
-} };
+};
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ PHY_ID_BCM7250, 0xfffffff0, },
@@ -386,8 +353,6 @@
{ PHY_ID_BCM7439, 0xfffffff0, },
{ PHY_ID_BCM7435, 0xfffffff0, },
{ PHY_ID_BCM7445, 0xfffffff0, },
- { PHY_BCM_OUI_4, 0xffff0000 },
- { PHY_BCM_OUI_5, 0xffffff00 },
{ }
};
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index d0168f1..9fb9d80a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -486,6 +486,12 @@
if (err < 0)
return err;
+ return 0;
+}
+
+static int marvell_config_init(struct phy_device *phydev)
+{
+ /* Set registers from marvell,reg-init DT property */
return marvell_of_reg_init(phydev);
}
@@ -535,7 +541,7 @@
mdelay(500);
- return 0;
+ return marvell_config_init(phydev);
}
static int m88e3016_config_init(struct phy_device *phydev)
@@ -554,7 +560,7 @@
if (reg < 0)
return reg;
- return 0;
+ return marvell_config_init(phydev);
}
static int m88e1111_config_init(struct phy_device *phydev)
@@ -1118,6 +1124,7 @@
.features = PHY_GBIT_FEATURES,
.probe = marvell_probe,
.flags = PHY_HAS_INTERRUPT,
+ .config_init = &marvell_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -1189,6 +1196,7 @@
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
+ .config_init = &marvell_config_init,
.config_aneg = &m88e1121_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -1207,6 +1215,7 @@
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
+ .config_init = &marvell_config_init,
.config_aneg = &m88e1318_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -1318,6 +1327,7 @@
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
+ .config_init = &marvell_config_init,
.config_aneg = &m88e1510_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bad3f00..e551f3a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1410,7 +1410,7 @@
features = (SUPPORTED_TP | SUPPORTED_MII
| SUPPORTED_AUI | SUPPORTED_FIBRE |
- SUPPORTED_BNC);
+ SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause);
/* Do we support autonegotiation? */
val = phy_read(phydev, MII_BMSR);