Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/phy/bcm7xxx.c
	drivers/net/phy/marvell.c
	drivers/net/vxlan.c

All three conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 45bdd87..a6527d5 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -214,6 +214,8 @@
 static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
 						struct rtnl_link_stats64 *stats);
 static void bond_slave_arr_handler(struct work_struct *work);
+static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
+				  int mod);
 
 /*---------------------------- General routines -----------------------------*/
 
@@ -2122,6 +2124,7 @@
 			continue;
 
 		case BOND_LINK_UP:
+			bond_update_speed_duplex(slave);
 			bond_set_slave_link_state(slave, BOND_LINK_UP,
 						  BOND_SLAVE_NOTIFY_NOW);
 			slave->last_link_up = jiffies;
@@ -2454,7 +2457,7 @@
 		 struct slave *slave)
 {
 	struct arphdr *arp = (struct arphdr *)skb->data;
-	struct slave *curr_active_slave;
+	struct slave *curr_active_slave, *curr_arp_slave;
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 	int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
@@ -2501,26 +2504,41 @@
 		     &sip, &tip);
 
 	curr_active_slave = rcu_dereference(bond->curr_active_slave);
+	curr_arp_slave = rcu_dereference(bond->current_arp_slave);
 
-	/* Backup slaves won't see the ARP reply, but do come through
-	 * here for each ARP probe (so we swap the sip/tip to validate
-	 * the probe).  In a "redundant switch, common router" type of
-	 * configuration, the ARP probe will (hopefully) travel from
-	 * the active, through one switch, the router, then the other
-	 * switch before reaching the backup.
+	/* We 'trust' the received ARP enough to validate it if:
 	 *
-	 * We 'trust' the arp requests if there is an active slave and
-	 * it received valid arp reply(s) after it became active. This
-	 * is done to avoid endless looping when we can't reach the
+	 * (a) the slave receiving the ARP is active (which includes the
+	 * current ARP slave, if any), or
+	 *
+	 * (b) the receiving slave isn't active, but there is a currently
+	 * active slave and it received valid arp reply(s) after it became
+	 * the currently active slave, or
+	 *
+	 * (c) there is an ARP slave that sent an ARP during the prior ARP
+	 * interval, and we receive an ARP reply on any slave.  We accept
+	 * these because switch FDB update delays may deliver the ARP
+	 * reply to a slave other than the sender of the ARP request.
+	 *
+	 * Note: for (b), backup slaves are receiving the broadcast ARP
+	 * request, not a reply.  This request passes from the sending
+	 * slave through the L2 switch(es) to the receiving slave.  Since
+	 * this is checking the request, sip/tip are swapped for
+	 * validation.
+	 *
+	 * This is done to avoid endless looping when we can't reach the
 	 * arp_ip_target and fool ourselves with our own arp requests.
 	 */
-
 	if (bond_is_active_slave(slave))
 		bond_validate_arp(bond, slave, sip, tip);
 	else if (curr_active_slave &&
 		 time_after(slave_last_rx(bond, curr_active_slave),
 			    curr_active_slave->last_link_up))
 		bond_validate_arp(bond, slave, tip, sip);
+	else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) &&
+		 bond_time_in_interval(bond,
+				       dev_trans_start(curr_arp_slave->dev), 1))
+		bond_validate_arp(bond, slave, sip, tip);
 
 out_unlock:
 	if (arp != (struct arphdr *)skb->data)
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index fc5b756..eb7192f 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -117,6 +117,9 @@
  */
 #define EMS_USB_ARM7_CLOCK 8000000
 
+#define CPC_TX_QUEUE_TRIGGER_LOW	25
+#define CPC_TX_QUEUE_TRIGGER_HIGH	35
+
 /*
  * CAN-Message representation in a CPC_MSG. Message object type is
  * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
@@ -278,6 +281,11 @@
 	switch (urb->status) {
 	case 0:
 		dev->free_slots = dev->intr_in_buffer[1];
+		if(dev->free_slots > CPC_TX_QUEUE_TRIGGER_HIGH){
+			if (netif_queue_stopped(netdev)){
+				netif_wake_queue(netdev);
+			}
+		}
 		break;
 
 	case -ECONNRESET: /* unlink */
@@ -526,8 +534,6 @@
 	/* Release context */
 	context->echo_index = MAX_TX_URBS;
 
-	if (netif_queue_stopped(netdev))
-		netif_wake_queue(netdev);
 }
 
 /*
@@ -587,7 +593,7 @@
 	int err, i;
 
 	dev->intr_in_buffer[0] = 0;
-	dev->free_slots = 15; /* initial size */
+	dev->free_slots = 50; /* initial size */
 
 	for (i = 0; i < MAX_RX_URBS; i++) {
 		struct urb *urb = NULL;
@@ -835,7 +841,7 @@
 
 		/* Slow down tx path */
 		if (atomic_read(&dev->active_tx_urbs) >= MAX_TX_URBS ||
-		    dev->free_slots < 5) {
+		    dev->free_slots < CPC_TX_QUEUE_TRIGGER_LOW) {
 			netif_stop_queue(netdev);
 		}
 	}
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index cc6c545..a47f52f 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -25,6 +25,7 @@
 static const struct mv88e6xxx_switch_id mv88e6352_table[] = {
 	{ PORT_SWITCH_ID_6172, "Marvell 88E6172" },
 	{ PORT_SWITCH_ID_6176, "Marvell 88E6176" },
+	{ PORT_SWITCH_ID_6240, "Marvell 88E6240" },
 	{ PORT_SWITCH_ID_6320, "Marvell 88E6320" },
 	{ PORT_SWITCH_ID_6320_A1, "Marvell 88E6320 (A1)" },
 	{ PORT_SWITCH_ID_6320_A2, "Marvell 88e6320 (A2)" },
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index cf34681..512c8c0 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1555,7 +1555,7 @@
 
 	if (vlan.vid != vid || !vlan.valid ||
 	    vlan.data[port] == GLOBAL_VTU_DATA_MEMBER_TAG_NON_MEMBER)
-		return -ENOENT;
+		return -EOPNOTSUPP;
 
 	vlan.data[port] = GLOBAL_VTU_DATA_MEMBER_TAG_NON_MEMBER;
 
@@ -1582,6 +1582,7 @@
 			    const struct switchdev_obj_port_vlan *vlan)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	const u16 defpvid = 4000 + ds->index * DSA_MAX_PORTS + port;
 	u16 pvid, vid;
 	int err = 0;
 
@@ -1597,7 +1598,8 @@
 			goto unlock;
 
 		if (vid == pvid) {
-			err = _mv88e6xxx_port_pvid_set(ds, port, 0);
+			/* restore reserved VLAN ID */
+			err = _mv88e6xxx_port_pvid_set(ds, port, defpvid);
 			if (err)
 				goto unlock;
 		}
@@ -1889,26 +1891,20 @@
 
 int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members)
 {
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port;
-	int err;
-
-	/* The port joined a bridge, so leave its reserved VLAN */
-	mutex_lock(&ps->smi_mutex);
-	err = _mv88e6xxx_port_vlan_del(ds, port, pvid);
-	if (!err)
-		err = _mv88e6xxx_port_pvid_set(ds, port, 0);
-	mutex_unlock(&ps->smi_mutex);
-	return err;
+	return 0;
 }
 
 int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members)
 {
+	return 0;
+}
+
+static int mv88e6xxx_setup_port_default_vlan(struct dsa_switch *ds, int port)
+{
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
 	const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port;
 	int err;
 
-	/* The port left the bridge, so join its reserved VLAN */
 	mutex_lock(&ps->smi_mutex);
 	err = _mv88e6xxx_port_vlan_add(ds, port, pvid, true);
 	if (!err)
@@ -2192,8 +2188,7 @@
 		if (dsa_is_cpu_port(ds, i) || dsa_is_dsa_port(ds, i))
 			continue;
 
-		/* setup the unbridged state */
-		ret = mv88e6xxx_port_bridge_leave(ds, i, 0);
+		ret = mv88e6xxx_setup_port_default_vlan(ds, i);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index 2777289..2f79d29 100644
--- a/drivers/net/ethernet/8390/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -1501,6 +1501,7 @@
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
+	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0009),
 	PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
 	PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
 	PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 3f3bcbe..0907ab6 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -2380,7 +2380,7 @@
 						    sizeof(u32),
 						    &tx_ring->tx_status_pa,
 						    GFP_KERNEL);
-	if (!tx_ring->tx_status_pa) {
+	if (!tx_ring->tx_status) {
 		dev_err(&adapter->pdev->dev,
 			"Cannot alloc memory for Tx status block\n");
 		return -ENOMEM;
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index 87e727b..fcdf5dd 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -50,8 +50,8 @@
 static void write_rreg(u_long base, u_int reg, u_int val)
 {
 	asm volatile(
-	"str%?h	%1, [%2]	@ NET_RAP\n\t"
-	"str%?h	%0, [%2, #-4]	@ NET_RDP"
+	"strh	%1, [%2]	@ NET_RAP\n\t"
+	"strh	%0, [%2, #-4]	@ NET_RDP"
 	:
 	: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
 }
@@ -60,8 +60,8 @@
 {
 	unsigned short v;
 	asm volatile(
-	"str%?h	%1, [%2]	@ NET_RAP\n\t"
-	"ldr%?h	%0, [%2, #-4]	@ NET_RDP"
+	"strh	%1, [%2]	@ NET_RAP\n\t"
+	"ldrh	%0, [%2, #-4]	@ NET_RDP"
 	: "=r" (v)
 	: "r" (reg), "r" (ISAIO_BASE + 0x0464));
 	return v;
@@ -70,8 +70,8 @@
 static inline void write_ireg(u_long base, u_int reg, u_int val)
 {
 	asm volatile(
-	"str%?h	%1, [%2]	@ NET_RAP\n\t"
-	"str%?h	%0, [%2, #8]	@ NET_IDP"
+	"strh	%1, [%2]	@ NET_RAP\n\t"
+	"strh	%0, [%2, #8]	@ NET_IDP"
 	:
 	: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
 }
@@ -80,8 +80,8 @@
 {
 	u_short v;
 	asm volatile(
-	"str%?h	%1, [%2]	@ NAT_RAP\n\t"
-	"ldr%?h	%0, [%2, #8]	@ NET_IDP\n\t"
+	"strh	%1, [%2]	@ NAT_RAP\n\t"
+	"ldrh	%0, [%2, #8]	@ NET_IDP\n\t"
 	: "=r" (v)
 	: "r" (reg), "r" (ISAIO_BASE + 0x0464));
 	return v;
@@ -96,7 +96,7 @@
 	offset = ISAMEM_BASE + (offset << 1);
 	length = (length + 1) & ~1;
 	if ((int)buf & 2) {
-		asm volatile("str%?h	%2, [%0], #4"
+		asm volatile("strh	%2, [%0], #4"
 		 : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
 		buf += 2;
 		length -= 2;
@@ -104,20 +104,20 @@
 	while (length > 8) {
 		register unsigned int tmp asm("r2"), tmp2 asm("r3");
 		asm volatile(
-			"ldm%?ia	%0!, {%1, %2}"
+			"ldmia	%0!, {%1, %2}"
 			: "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
 		length -= 8;
 		asm volatile(
-			"str%?h	%1, [%0], #4\n\t"
-			"mov%?	%1, %1, lsr #16\n\t"
-			"str%?h	%1, [%0], #4\n\t"
-			"str%?h	%2, [%0], #4\n\t"
-			"mov%?	%2, %2, lsr #16\n\t"
-			"str%?h	%2, [%0], #4"
+			"strh	%1, [%0], #4\n\t"
+			"mov	%1, %1, lsr #16\n\t"
+			"strh	%1, [%0], #4\n\t"
+			"strh	%2, [%0], #4\n\t"
+			"mov	%2, %2, lsr #16\n\t"
+			"strh	%2, [%0], #4"
 		: "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
 	}
 	while (length > 0) {
-		asm volatile("str%?h	%2, [%0], #4"
+		asm volatile("strh	%2, [%0], #4"
 		 : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
 		buf += 2;
 		length -= 2;
@@ -132,23 +132,23 @@
 	if ((int)buf & 2) {
 		unsigned int tmp;
 		asm volatile(
-			"ldr%?h	%2, [%0], #4\n\t"
-			"str%?b	%2, [%1], #1\n\t"
-			"mov%?	%2, %2, lsr #8\n\t"
-			"str%?b	%2, [%1], #1"
+			"ldrh	%2, [%0], #4\n\t"
+			"strb	%2, [%1], #1\n\t"
+			"mov	%2, %2, lsr #8\n\t"
+			"strb	%2, [%1], #1"
 		: "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
 		length -= 2;
 	}
 	while (length > 8) {
 		register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
 		asm volatile(
-			"ldr%?h	%2, [%0], #4\n\t"
-			"ldr%?h	%4, [%0], #4\n\t"
-			"ldr%?h	%3, [%0], #4\n\t"
-			"orr%?	%2, %2, %4, lsl #16\n\t"
-			"ldr%?h	%4, [%0], #4\n\t"
-			"orr%?	%3, %3, %4, lsl #16\n\t"
-			"stm%?ia	%1!, {%2, %3}"
+			"ldrh	%2, [%0], #4\n\t"
+			"ldrh	%4, [%0], #4\n\t"
+			"ldrh	%3, [%0], #4\n\t"
+			"orr	%2, %2, %4, lsl #16\n\t"
+			"ldrh	%4, [%0], #4\n\t"
+			"orr	%3, %3, %4, lsl #16\n\t"
+			"stmia	%1!, {%2, %3}"
 		: "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
 		: "0" (offset), "1" (buf));
 		length -= 8;
@@ -156,10 +156,10 @@
 	while (length > 0) {
 		unsigned int tmp;
 		asm volatile(
-			"ldr%?h	%2, [%0], #4\n\t"
-			"str%?b	%2, [%1], #1\n\t"
-			"mov%?	%2, %2, lsr #8\n\t"
-			"str%?b	%2, [%1], #1"
+			"ldrh	%2, [%0], #4\n\t"
+			"strb	%2, [%1], #1\n\t"
+			"mov	%2, %2, lsr #8\n\t"
+			"strb	%2, [%1], #1"
 		: "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
 		length -= 2;
 	}
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index 256f590..3a7ebfd 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -547,8 +547,8 @@
 	/* Make certain the data structures used by the LANCE are aligned and DMAble. */
 
 	lp = kzalloc(sizeof(*lp), GFP_DMA | GFP_KERNEL);
-	if(lp==NULL)
-		return -ENODEV;
+	if (!lp)
+		return -ENOMEM;
 	if (lance_debug > 6) printk(" (#0x%05lx)", (unsigned long)lp);
 	dev->ml_priv = lp;
 	lp->name = chipname;
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index abe1eab..6446af1 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -163,7 +163,7 @@
 		struct sk_buff *skb = tx_buff->skb;
 		unsigned int info = le32_to_cpu(txbd->info);
 
-		if ((info & FOR_EMAC) || !txbd->data)
+		if ((info & FOR_EMAC) || !txbd->data || !skb)
 			break;
 
 		if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) {
@@ -191,6 +191,7 @@
 
 		txbd->data = 0;
 		txbd->info = 0;
+		tx_buff->skb = NULL;
 
 		*txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM;
 	}
@@ -446,6 +447,9 @@
 		*last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM;
 	}
 
+	priv->txbd_curr = 0;
+	priv->txbd_dirty = 0;
+
 	/* Clean Tx BD's */
 	memset(priv->txbd, 0, TX_RING_SZ);
 
@@ -514,6 +518,64 @@
 }
 
 /**
+ * arc_free_tx_queue - free skb from tx queue
+ * @ndev:	Pointer to the network device.
+ *
+ * This function must be called while EMAC disable
+ */
+static void arc_free_tx_queue(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	unsigned int i;
+
+	for (i = 0; i < TX_BD_NUM; i++) {
+		struct arc_emac_bd *txbd = &priv->txbd[i];
+		struct buffer_state *tx_buff = &priv->tx_buff[i];
+
+		if (tx_buff->skb) {
+			dma_unmap_single(&ndev->dev, dma_unmap_addr(tx_buff, addr),
+					 dma_unmap_len(tx_buff, len), DMA_TO_DEVICE);
+
+			/* return the sk_buff to system */
+			dev_kfree_skb_irq(tx_buff->skb);
+		}
+
+		txbd->info = 0;
+		txbd->data = 0;
+		tx_buff->skb = NULL;
+	}
+}
+
+/**
+ * arc_free_rx_queue - free skb from rx queue
+ * @ndev:	Pointer to the network device.
+ *
+ * This function must be called while EMAC disable
+ */
+static void arc_free_rx_queue(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	unsigned int i;
+
+	for (i = 0; i < RX_BD_NUM; i++) {
+		struct arc_emac_bd *rxbd = &priv->rxbd[i];
+		struct buffer_state *rx_buff = &priv->rx_buff[i];
+
+		if (rx_buff->skb) {
+			dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
+					dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
+
+			/* return the sk_buff to system */
+			dev_kfree_skb_irq(rx_buff->skb);
+		}
+
+		rxbd->info = 0;
+		rxbd->data = 0;
+		rx_buff->skb = NULL;
+	}
+}
+
+/**
  * arc_emac_stop - Close the network device.
  * @ndev:	Pointer to the network device.
  *
@@ -534,6 +596,10 @@
 	/* Disable EMAC */
 	arc_reg_clr(priv, R_CTRL, EN_MASK);
 
+	/* Return the sk_buff to system */
+	arc_free_tx_queue(ndev);
+	arc_free_rx_queue(ndev);
+
 	return 0;
 }
 
@@ -610,7 +676,6 @@
 	dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], addr, addr);
 	dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
 
-	priv->tx_buff[*txbd_curr].skb = skb;
 	priv->txbd[*txbd_curr].data = cpu_to_le32(addr);
 
 	/* Make sure pointer to data buffer is set */
@@ -620,6 +685,11 @@
 
 	*info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
 
+	/* Make sure info word is set */
+	wmb();
+
+	priv->tx_buff[*txbd_curr].skb = skb;
+
 	/* Increment index to point to the next BD */
 	*txbd_curr = (*txbd_curr + 1) % TX_BD_NUM;
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index d946bba..1fb8010 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -6185,26 +6185,80 @@
 		shift -= 4;
 		digit = ((num & mask) >> shift);
 		if (digit == 0 && remove_leading_zeros) {
-			mask = mask >> 4;
-			continue;
-		} else if (digit < 0xa)
-			*str_ptr = digit + '0';
-		else
-			*str_ptr = digit - 0xa + 'a';
-		remove_leading_zeros = 0;
-		str_ptr++;
-		(*len)--;
+			*str_ptr = '0';
+		} else {
+			if (digit < 0xa)
+				*str_ptr = digit + '0';
+			else
+				*str_ptr = digit - 0xa + 'a';
+
+			remove_leading_zeros = 0;
+			str_ptr++;
+			(*len)--;
+		}
 		mask = mask >> 4;
 		if (shift == 4*4) {
+			if (remove_leading_zeros) {
+				str_ptr++;
+				(*len)--;
+			}
 			*str_ptr = '.';
 			str_ptr++;
 			(*len)--;
 			remove_leading_zeros = 1;
 		}
 	}
+	if (remove_leading_zeros)
+		(*len)--;
 	return 0;
 }
 
+static int bnx2x_3_seq_format_ver(u32 num, u8 *str, u16 *len)
+{
+	u8 *str_ptr = str;
+	u32 mask = 0x00f00000;
+	u8 shift = 8*3;
+	u8 digit;
+	u8 remove_leading_zeros = 1;
+
+	if (*len < 10) {
+		/* Need more than 10chars for this format */
+		*str_ptr = '\0';
+		(*len)--;
+		return -EINVAL;
+	}
+
+	while (shift > 0) {
+		shift -= 4;
+		digit = ((num & mask) >> shift);
+		if (digit == 0 && remove_leading_zeros) {
+			*str_ptr = '0';
+		} else {
+			if (digit < 0xa)
+				*str_ptr = digit + '0';
+			else
+				*str_ptr = digit - 0xa + 'a';
+
+			remove_leading_zeros = 0;
+			str_ptr++;
+			(*len)--;
+		}
+		mask = mask >> 4;
+		if ((shift == 4*4) || (shift == 4*2)) {
+			if (remove_leading_zeros) {
+				str_ptr++;
+				(*len)--;
+			}
+			*str_ptr = '.';
+			str_ptr++;
+			(*len)--;
+			remove_leading_zeros = 1;
+		}
+	}
+	if (remove_leading_zeros)
+		(*len)--;
+	return 0;
+}
 
 static int bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len)
 {
@@ -9677,8 +9731,9 @@
 
 	if (bnx2x_is_8483x_8485x(phy)) {
 		bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
-		bnx2x_save_spirom_version(bp, port, fw_ver1 & 0xfff,
-				phy->ver_addr);
+		if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858)
+			fw_ver1 &= 0xfff;
+		bnx2x_save_spirom_version(bp, port, fw_ver1, phy->ver_addr);
 	} else {
 		/* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */
 		/* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
@@ -9732,16 +9787,32 @@
 static void bnx2x_848xx_set_led(struct bnx2x *bp,
 				struct bnx2x_phy *phy)
 {
-	u16 val, offset, i;
+	u16 val, led3_blink_rate, offset, i;
 	static struct bnx2x_reg_set reg_set[] = {
 		{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x0080},
 		{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED2_MASK, 0x0018},
 		{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, 0x0006},
-		{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_BLINK, 0x0000},
 		{MDIO_PMA_DEVAD, MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH,
 			MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ},
 		{MDIO_AN_DEVAD, 0xFFFB, 0xFFFD}
 	};
+
+	if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+		/* Set LED5 source */
+		bnx2x_cl45_write(bp, phy,
+				 MDIO_PMA_DEVAD,
+				 MDIO_PMA_REG_8481_LED5_MASK,
+				 0x90);
+		led3_blink_rate = 0x000f;
+	} else {
+		led3_blink_rate = 0x0000;
+	}
+	/* Set LED3 BLINK */
+	bnx2x_cl45_write(bp, phy,
+			 MDIO_PMA_DEVAD,
+			 MDIO_PMA_REG_8481_LED3_BLINK,
+			 led3_blink_rate);
+
 	/* PHYC_CTL_LED_CTL */
 	bnx2x_cl45_read(bp, phy,
 			MDIO_PMA_DEVAD,
@@ -9749,6 +9820,9 @@
 	val &= 0xFE00;
 	val |= 0x0092;
 
+	if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858)
+		val |= 2 << 12; /* LED5 ON based on source */
+
 	bnx2x_cl45_write(bp, phy,
 			 MDIO_PMA_DEVAD,
 			 MDIO_PMA_REG_8481_LINK_SIGNAL, val);
@@ -9762,10 +9836,17 @@
 	else
 		offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1;
 
-	/* stretch_en for LED3*/
+	if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858)
+		val = MDIO_PMA_REG_84858_ALLOW_GPHY_ACT |
+		      MDIO_PMA_REG_84823_LED3_STRETCH_EN;
+	else
+		val = MDIO_PMA_REG_84823_LED3_STRETCH_EN;
+
+	/* stretch_en for LEDs */
 	bnx2x_cl45_read_or_write(bp, phy,
-				 MDIO_PMA_DEVAD, offset,
-				 MDIO_PMA_REG_84823_LED3_STRETCH_EN);
+				 MDIO_PMA_DEVAD,
+				 offset,
+				 val);
 }
 
 static void bnx2x_848xx_specific_func(struct bnx2x_phy *phy,
@@ -9775,7 +9856,7 @@
 	struct bnx2x *bp = params->bp;
 	switch (action) {
 	case PHY_INIT:
-		if (!bnx2x_is_8483x_8485x(phy)) {
+		if (bnx2x_is_8483x_8485x(phy)) {
 			/* Save spirom version */
 			bnx2x_save_848xx_spirom_version(phy, bp, params->port);
 		}
@@ -10036,15 +10117,20 @@
 
 static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
 				struct link_params *params, u16 fw_cmd,
-				u16 cmd_args[], int argc)
+				u16 cmd_args[], int argc, int process)
 {
 	int idx;
 	u16 val;
 	struct bnx2x *bp = params->bp;
-	/* Write CMD_OPEN_OVERRIDE to STATUS reg */
-	bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
-			MDIO_848xx_CMD_HDLR_STATUS,
-			PHY84833_STATUS_CMD_OPEN_OVERRIDE);
+	int rc = 0;
+
+	if (process == PHY84833_MB_PROCESS2) {
+		/* Write CMD_OPEN_OVERRIDE to STATUS reg */
+		bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+				 MDIO_848xx_CMD_HDLR_STATUS,
+				 PHY84833_STATUS_CMD_OPEN_OVERRIDE);
+	}
+
 	for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
 		bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
 				MDIO_848xx_CMD_HDLR_STATUS, &val);
@@ -10054,15 +10140,27 @@
 	}
 	if (idx >= PHY848xx_CMDHDLR_WAIT) {
 		DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");
+		/* if the status is CMD_COMPLETE_PASS or CMD_COMPLETE_ERROR
+		 * clear the status to CMD_CLEAR_COMPLETE
+		 */
+		if (val == PHY84833_STATUS_CMD_COMPLETE_PASS ||
+		    val == PHY84833_STATUS_CMD_COMPLETE_ERROR) {
+			bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+					 MDIO_848xx_CMD_HDLR_STATUS,
+					 PHY84833_STATUS_CMD_CLEAR_COMPLETE);
+		}
 		return -EINVAL;
 	}
-
-	/* Prepare argument(s) and issue command */
-	for (idx = 0; idx < argc; idx++) {
-		bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
-				MDIO_848xx_CMD_HDLR_DATA1 + idx,
-				cmd_args[idx]);
+	if (process == PHY84833_MB_PROCESS1 ||
+	    process == PHY84833_MB_PROCESS2) {
+		/* Prepare argument(s) */
+		for (idx = 0; idx < argc; idx++) {
+			bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+					 MDIO_848xx_CMD_HDLR_DATA1 + idx,
+					 cmd_args[idx]);
+		}
 	}
+
 	bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
 			MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
 	for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
@@ -10076,24 +10174,30 @@
 	if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
 	    (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
 		DP(NETIF_MSG_LINK, "FW cmd failed.\n");
-		return -EINVAL;
+		rc = -EINVAL;
 	}
-	/* Gather returning data */
-	for (idx = 0; idx < argc; idx++) {
-		bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
-				MDIO_848xx_CMD_HDLR_DATA1 + idx,
-				&cmd_args[idx]);
+	if (process == PHY84833_MB_PROCESS3 && rc == 0) {
+		/* Gather returning data */
+		for (idx = 0; idx < argc; idx++) {
+			bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+					MDIO_848xx_CMD_HDLR_DATA1 + idx,
+					&cmd_args[idx]);
+		}
 	}
-	bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
-			MDIO_848xx_CMD_HDLR_STATUS,
-			PHY84833_STATUS_CMD_CLEAR_COMPLETE);
-	return 0;
+	if (val == PHY84833_STATUS_CMD_COMPLETE_ERROR ||
+	    val == PHY84833_STATUS_CMD_COMPLETE_PASS) {
+		bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+				 MDIO_848xx_CMD_HDLR_STATUS,
+				 PHY84833_STATUS_CMD_CLEAR_COMPLETE);
+	}
+	return rc;
 }
 
 static int bnx2x_848xx_cmd_hdlr(struct bnx2x_phy *phy,
 				struct link_params *params,
 				u16 fw_cmd,
-				u16 cmd_args[], int argc)
+					   u16 cmd_args[], int argc,
+					   int process)
 {
 	struct bnx2x *bp = params->bp;
 
@@ -10106,7 +10210,7 @@
 					    argc);
 	} else {
 		return bnx2x_84833_cmd_hdlr(phy, params, fw_cmd, cmd_args,
-					    argc);
+					    argc, process);
 	}
 }
 
@@ -10133,7 +10237,7 @@
 
 	status = bnx2x_848xx_cmd_hdlr(phy, params,
 				      PHY848xx_CMD_SET_PAIR_SWAP, data,
-				      PHY848xx_CMDHDLR_MAX_ARGS);
+				      2, PHY84833_MB_PROCESS2);
 	if (status == 0)
 		DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data[1]);
 
@@ -10222,8 +10326,8 @@
 	DP(NETIF_MSG_LINK, "Don't Advertise 10GBase-T EEE\n");
 
 	/* Prevent Phy from working in EEE and advertising it */
-	rc = bnx2x_848xx_cmd_hdlr(phy, params,
-				  PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
+	rc = bnx2x_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE,
+				  &cmd_args, 1, PHY84833_MB_PROCESS1);
 	if (rc) {
 		DP(NETIF_MSG_LINK, "EEE disable failed.\n");
 		return rc;
@@ -10240,8 +10344,8 @@
 	struct bnx2x *bp = params->bp;
 	u16 cmd_args = 1;
 
-	rc = bnx2x_848xx_cmd_hdlr(phy, params,
-				  PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
+	rc = bnx2x_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE,
+				  &cmd_args, 1, PHY84833_MB_PROCESS1);
 	if (rc) {
 		DP(NETIF_MSG_LINK, "EEE enable failed.\n");
 		return rc;
@@ -10362,7 +10466,7 @@
 		cmd_args[3] = PHY84833_CONSTANT_LATENCY;
 		rc = bnx2x_848xx_cmd_hdlr(phy, params,
 					  PHY848xx_CMD_SET_EEE_MODE, cmd_args,
-					  PHY848xx_CMDHDLR_MAX_ARGS);
+					  4, PHY84833_MB_PROCESS1);
 		if (rc)
 			DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");
 	}
@@ -10416,6 +10520,32 @@
 		vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK;
 	}
 
+	if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
+		/* Additional settings for jumbo packets in 1000BASE-T mode */
+		/* Allow rx extended length */
+		bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+				MDIO_AN_REG_8481_AUX_CTRL, &val);
+		val |= 0x4000;
+		bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+				 MDIO_AN_REG_8481_AUX_CTRL, val);
+		/* TX FIFO Elasticity LSB */
+		bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+				MDIO_AN_REG_8481_1G_100T_EXT_CTRL, &val);
+		val |= 0x1;
+		bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+				 MDIO_AN_REG_8481_1G_100T_EXT_CTRL, val);
+		/* TX FIFO Elasticity MSB */
+		/* Enable expansion register 0x46 (Pattern Generator status) */
+		bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+				 MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf46);
+
+		bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+				MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &val);
+		val |= 0x4000;
+		bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+				 MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, val);
+	}
+
 	if (bnx2x_is_8483x_8485x(phy)) {
 		/* Bring PHY out of super isolate mode as the final step. */
 		bnx2x_cl45_read_and_write(bp, phy,
@@ -10555,6 +10685,17 @@
 	return link_up;
 }
 
+static int bnx2x_8485x_format_ver(u32 raw_ver, u8 *str, u16 *len)
+{
+	int status = 0;
+	u32 num;
+
+	num = ((raw_ver & 0xF80) >> 7) << 16 | ((raw_ver & 0x7F) << 8) |
+	      ((raw_ver & 0xF000) >> 12);
+	status = bnx2x_3_seq_format_ver(num, str, len);
+	return status;
+}
+
 static int bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len)
 {
 	int status = 0;
@@ -10651,10 +10792,25 @@
 					0x0);
 
 		} else {
+			/* LED 1 OFF */
 			bnx2x_cl45_write(bp, phy,
 					 MDIO_PMA_DEVAD,
 					 MDIO_PMA_REG_8481_LED1_MASK,
 					 0x0);
+
+			if (phy->type ==
+				PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+				/* LED 2 OFF */
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED2_MASK,
+						 0x0);
+				/* LED 3 OFF */
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED3_MASK,
+						 0x0);
+			}
 		}
 		break;
 	case LED_MODE_FRONT_PANEL_OFF:
@@ -10713,6 +10869,19 @@
 						 MDIO_PMA_REG_8481_SIGNAL_MASK,
 						 0x0);
 			}
+			if (phy->type ==
+				PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+				/* LED 2 OFF */
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED2_MASK,
+						 0x0);
+				/* LED 3 OFF */
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED3_MASK,
+						 0x0);
+			}
 		}
 		break;
 	case LED_MODE_ON:
@@ -10776,6 +10945,25 @@
 						params->port*4,
 						NIG_MASK_MI_INT);
 				}
+			}
+			if (phy->type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+				/* Tell LED3 to constant on */
+				bnx2x_cl45_read(bp, phy,
+						MDIO_PMA_DEVAD,
+						MDIO_PMA_REG_8481_LINK_SIGNAL,
+						&val);
+				val &= ~(7<<6);
+				val |= (2<<6);  /* A83B[8:6]= 2 */
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LINK_SIGNAL,
+						 val);
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED3_MASK,
+						 0x20);
+			} else {
 				bnx2x_cl45_write(bp, phy,
 						 MDIO_PMA_DEVAD,
 						 MDIO_PMA_REG_8481_SIGNAL_MASK,
@@ -10854,6 +11042,17 @@
 					 MDIO_PMA_REG_8481_LINK_SIGNAL,
 					 val);
 			if (phy->type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED2_MASK,
+						 0x18);
+				bnx2x_cl45_write(bp, phy,
+						 MDIO_PMA_DEVAD,
+						 MDIO_PMA_REG_8481_LED3_MASK,
+						 0x06);
+			}
+			if (phy->type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) {
 				/* Restore LED4 source to external link,
 				 * and re-enable interrupts.
@@ -11982,7 +12181,7 @@
 	.read_status	= (read_status_t)bnx2x_848xx_read_status,
 	.link_reset	= (link_reset_t)bnx2x_848x3_link_reset,
 	.config_loopback = (config_loopback_t)NULL,
-	.format_fw_ver	= (format_fw_ver_t)bnx2x_848xx_format_ver,
+	.format_fw_ver	= (format_fw_ver_t)bnx2x_8485x_format_ver,
 	.hw_reset	= (hw_reset_t)bnx2x_84833_hw_reset_phy,
 	.set_link_led	= (set_link_led_t)bnx2x_848xx_set_link_led,
 	.phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func
@@ -13807,8 +14006,10 @@
 	if (CHIP_IS_E3(bp)) {
 		struct bnx2x_phy *phy = &params->phy[INT_PHY];
 		bnx2x_set_aer_mmd(params, phy);
-		if ((phy->supported & SUPPORTED_20000baseKR2_Full) &&
-		    (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
+		if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+		     (phy->speed_cap_mask &
+		      PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
+		    (phy->req_line_speed == SPEED_20000))
 			bnx2x_check_kr2_wa(params, vars, phy);
 		bnx2x_check_over_curr(params, vars);
 		if (vars->rx_tx_asic_rst)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 4dead49..a43dea2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -7296,6 +7296,8 @@
 #define MDIO_PMA_REG_84823_CTL_LED_CTL_1			0xa8e3
 #define MDIO_PMA_REG_84833_CTL_LED_CTL_1			0xa8ec
 #define MDIO_PMA_REG_84823_LED3_STRETCH_EN			0x0080
+/* BCM84858 only */
+#define MDIO_PMA_REG_84858_ALLOW_GPHY_ACT			0x8000
 
 /* BCM84833 only */
 #define MDIO_84833_TOP_CFG_FW_REV			0x400f
@@ -7337,6 +7339,10 @@
 #define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS		0x0040
 #define PHY84833_STATUS_CMD_CLEAR_COMPLETE		0x0080
 #define PHY84833_STATUS_CMD_OPEN_OVERRIDE		0xa5a5
+/* Mailbox Process */
+#define PHY84833_MB_PROCESS1				1
+#define PHY84833_MB_PROCESS2				2
+#define PHY84833_MB_PROCESS3				3
 
 /* Mailbox status set used by 84858 only */
 #define PHY84858_STATUS_CMD_RECEIVED			0x0001
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 169920a..ff1507f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -69,7 +69,7 @@
 #define BNXT_RX_DMA_OFFSET NET_SKB_PAD
 #define BNXT_RX_COPY_THRESH 256
 
-#define BNXT_TX_PUSH_THRESH 92
+#define BNXT_TX_PUSH_THRESH 164
 
 enum board_idx {
 	BCM57301,
@@ -223,11 +223,12 @@
 	}
 
 	if (free_size == bp->tx_ring_size && length <= bp->tx_push_thresh) {
-		struct tx_push_bd *push = txr->tx_push;
-		struct tx_bd *tx_push = &push->txbd1;
-		struct tx_bd_ext *tx_push1 = &push->txbd2;
-		void *pdata = tx_push1 + 1;
-		int j;
+		struct tx_push_buffer *tx_push_buf = txr->tx_push;
+		struct tx_push_bd *tx_push = &tx_push_buf->push_bd;
+		struct tx_bd_ext *tx_push1 = &tx_push->txbd2;
+		void *pdata = tx_push_buf->data;
+		u64 *end;
+		int j, push_len;
 
 		/* Set COAL_NOW to be ready quickly for the next push */
 		tx_push->tx_bd_len_flags_type =
@@ -247,6 +248,9 @@
 		tx_push1->tx_bd_cfa_meta = cpu_to_le32(vlan_tag_flags);
 		tx_push1->tx_bd_cfa_action = cpu_to_le32(cfa_action);
 
+		end = PTR_ALIGN(pdata + length + 1, 8) - 1;
+		*end = 0;
+
 		skb_copy_from_linear_data(skb, pdata, len);
 		pdata += len;
 		for (j = 0; j < last_frag; j++) {
@@ -261,22 +265,29 @@
 			pdata += skb_frag_size(frag);
 		}
 
-		memcpy(txbd, tx_push, sizeof(*txbd));
+		txbd->tx_bd_len_flags_type = tx_push->tx_bd_len_flags_type;
+		txbd->tx_bd_haddr = txr->data_mapping;
 		prod = NEXT_TX(prod);
 		txbd = &txr->tx_desc_ring[TX_RING(prod)][TX_IDX(prod)];
 		memcpy(txbd, tx_push1, sizeof(*txbd));
 		prod = NEXT_TX(prod);
-		push->doorbell =
+		tx_push->doorbell =
 			cpu_to_le32(DB_KEY_TX_PUSH | DB_LONG_TX_PUSH | prod);
 		txr->tx_prod = prod;
 
 		netdev_tx_sent_queue(txq, skb->len);
 
-		__iowrite64_copy(txr->tx_doorbell, push,
-				 (length + sizeof(*push) + 8) / 8);
+		push_len = (length + sizeof(*tx_push) + 7) / 8;
+		if (push_len > 16) {
+			__iowrite64_copy(txr->tx_doorbell, tx_push_buf, 16);
+			__iowrite64_copy(txr->tx_doorbell + 4, tx_push_buf + 1,
+					 push_len - 16);
+		} else {
+			__iowrite64_copy(txr->tx_doorbell, tx_push_buf,
+					 push_len);
+		}
 
 		tx_buf->is_push = 1;
-
 		goto tx_done;
 	}
 
@@ -1753,7 +1764,7 @@
 		push_size  = L1_CACHE_ALIGN(sizeof(struct tx_push_bd) +
 					bp->tx_push_thresh);
 
-		if (push_size > 128) {
+		if (push_size > 256) {
 			push_size = 0;
 			bp->tx_push_thresh = 0;
 		}
@@ -1772,7 +1783,6 @@
 			return rc;
 
 		if (bp->tx_push_size) {
-			struct tx_bd *txbd;
 			dma_addr_t mapping;
 
 			/* One pre-allocated DMA buffer to backup
@@ -1786,13 +1796,11 @@
 			if (!txr->tx_push)
 				return -ENOMEM;
 
-			txbd = &txr->tx_push->txbd1;
-
 			mapping = txr->tx_push_mapping +
 				sizeof(struct tx_push_bd);
-			txbd->tx_bd_haddr = cpu_to_le64(mapping);
+			txr->data_mapping = cpu_to_le64(mapping);
 
-			memset(txbd + 1, 0, sizeof(struct tx_bd_ext));
+			memset(txr->tx_push, 0, sizeof(struct tx_push_bd));
 		}
 		ring->queue_id = bp->q_info[j].queue_id;
 		if (i % bp->tx_nr_rings_per_tc == (bp->tx_nr_rings_per_tc - 1))
@@ -4546,20 +4554,18 @@
 	if (!(link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL) &&
 	    link_info->force_pause_setting != link_info->req_flow_ctrl)
 		update_pause = true;
-	if (link_info->req_duplex != link_info->duplex_setting)
-		update_link = true;
 	if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
 		if (BNXT_AUTO_MODE(link_info->auto_mode))
 			update_link = true;
 		if (link_info->req_link_speed != link_info->force_link_speed)
 			update_link = true;
+		if (link_info->req_duplex != link_info->duplex_setting)
+			update_link = true;
 	} else {
 		if (link_info->auto_mode == BNXT_LINK_AUTO_NONE)
 			update_link = true;
 		if (link_info->advertising != link_info->auto_link_speeds)
 			update_link = true;
-		if (link_info->req_link_speed != link_info->auto_link_speed)
-			update_link = true;
 	}
 
 	if (update_link)
@@ -4636,7 +4642,7 @@
 	if (link_re_init) {
 		rc = bnxt_update_phy_setting(bp);
 		if (rc)
-			goto open_err;
+			netdev_warn(bp->dev, "failed to update phy settings\n");
 	}
 
 	if (irq_re_init) {
@@ -4654,6 +4660,7 @@
 	/* Enable TX queues */
 	bnxt_tx_enable(bp);
 	mod_timer(&bp->timer, jiffies + bp->current_interval);
+	bnxt_update_link(bp, true);
 
 	return 0;
 
@@ -5677,22 +5684,16 @@
 	}
 
 	/*initialize the ethool setting copy with NVM settings */
-	if (BNXT_AUTO_MODE(link_info->auto_mode))
-		link_info->autoneg |= BNXT_AUTONEG_SPEED;
-
-	if (link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) {
-		if (link_info->auto_pause_setting == BNXT_LINK_PAUSE_BOTH)
-			link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+	if (BNXT_AUTO_MODE(link_info->auto_mode)) {
+		link_info->autoneg = BNXT_AUTONEG_SPEED |
+				     BNXT_AUTONEG_FLOW_CTRL;
+		link_info->advertising = link_info->auto_link_speeds;
 		link_info->req_flow_ctrl = link_info->auto_pause_setting;
-	} else if (link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) {
+	} else {
+		link_info->req_link_speed = link_info->force_link_speed;
+		link_info->req_duplex = link_info->duplex_setting;
 		link_info->req_flow_ctrl = link_info->force_pause_setting;
 	}
-	link_info->req_duplex = link_info->duplex_setting;
-	if (link_info->autoneg & BNXT_AUTONEG_SPEED)
-		link_info->req_link_speed = link_info->auto_link_speed;
-	else
-		link_info->req_link_speed = link_info->force_link_speed;
-	link_info->advertising = link_info->auto_link_speeds;
 	snprintf(phy_ver, PHY_VER_STR_LEN, " ph %d.%d.%d",
 		 link_info->phy_ver[0],
 		 link_info->phy_ver[1],
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 8af3ca8..2be51b3 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -411,8 +411,8 @@
 
 #define BNXT_NUM_TESTS(bp)	0
 
-#define BNXT_DEFAULT_RX_RING_SIZE	1023
-#define BNXT_DEFAULT_TX_RING_SIZE	512
+#define BNXT_DEFAULT_RX_RING_SIZE	511
+#define BNXT_DEFAULT_TX_RING_SIZE	511
 
 #define MAX_TPA		64
 
@@ -523,10 +523,16 @@
 
 struct tx_push_bd {
 	__le32			doorbell;
-	struct tx_bd		txbd1;
+	__le32			tx_bd_len_flags_type;
+	u32			tx_bd_opaque;
 	struct tx_bd_ext	txbd2;
 };
 
+struct tx_push_buffer {
+	struct tx_push_bd	push_bd;
+	u32			data[25];
+};
+
 struct bnxt_tx_ring_info {
 	struct bnxt_napi	*bnapi;
 	u16			tx_prod;
@@ -538,8 +544,9 @@
 
 	dma_addr_t		tx_desc_mapping[MAX_TX_PAGES];
 
-	struct tx_push_bd	*tx_push;
+	struct tx_push_buffer	*tx_push;
 	dma_addr_t		tx_push_mapping;
+	__le64			data_mapping;
 
 #define BNXT_DEV_STATE_CLOSING	0x1
 	u32			dev_state;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 922b898..3238817 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -486,15 +486,8 @@
 		speed_mask |= SUPPORTED_2500baseX_Full;
 	if (fw_speeds & BNXT_LINK_SPEED_MSK_10GB)
 		speed_mask |= SUPPORTED_10000baseT_Full;
-	/* TODO: support 25GB, 50GB with different cable type */
-	if (fw_speeds & BNXT_LINK_SPEED_MSK_20GB)
-		speed_mask |= SUPPORTED_20000baseMLD2_Full |
-			SUPPORTED_20000baseKR2_Full;
 	if (fw_speeds & BNXT_LINK_SPEED_MSK_40GB)
-		speed_mask |= SUPPORTED_40000baseKR4_Full |
-			SUPPORTED_40000baseCR4_Full |
-			SUPPORTED_40000baseSR4_Full |
-			SUPPORTED_40000baseLR4_Full;
+		speed_mask |= SUPPORTED_40000baseCR4_Full;
 
 	return speed_mask;
 }
@@ -514,15 +507,8 @@
 		speed_mask |= ADVERTISED_2500baseX_Full;
 	if (fw_speeds & BNXT_LINK_SPEED_MSK_10GB)
 		speed_mask |= ADVERTISED_10000baseT_Full;
-	/* TODO: how to advertise 20, 25, 40, 50GB with different cable type ?*/
-	if (fw_speeds & BNXT_LINK_SPEED_MSK_20GB)
-		speed_mask |= ADVERTISED_20000baseMLD2_Full |
-			      ADVERTISED_20000baseKR2_Full;
 	if (fw_speeds & BNXT_LINK_SPEED_MSK_40GB)
-		speed_mask |= ADVERTISED_40000baseKR4_Full |
-			      ADVERTISED_40000baseCR4_Full |
-			      ADVERTISED_40000baseSR4_Full |
-			      ADVERTISED_40000baseLR4_Full;
+		speed_mask |= ADVERTISED_40000baseCR4_Full;
 	return speed_mask;
 }
 
@@ -557,11 +543,12 @@
 	u16 ethtool_speed;
 
 	cmd->supported = bnxt_fw_to_ethtool_support_spds(link_info);
+	cmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 
 	if (link_info->auto_link_speeds)
 		cmd->supported |= SUPPORTED_Autoneg;
 
-	if (BNXT_AUTO_MODE(link_info->auto_mode)) {
+	if (link_info->autoneg) {
 		cmd->advertising =
 			bnxt_fw_to_ethtool_advertised_spds(link_info);
 		cmd->advertising |= ADVERTISED_Autoneg;
@@ -570,28 +557,16 @@
 		cmd->autoneg = AUTONEG_DISABLE;
 		cmd->advertising = 0;
 	}
-	if (link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) {
+	if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL) {
 		if ((link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) ==
 		    BNXT_LINK_PAUSE_BOTH) {
 			cmd->advertising |= ADVERTISED_Pause;
-			cmd->supported |= SUPPORTED_Pause;
 		} else {
 			cmd->advertising |= ADVERTISED_Asym_Pause;
-			cmd->supported |= SUPPORTED_Asym_Pause;
 			if (link_info->auto_pause_setting &
 			    BNXT_LINK_PAUSE_RX)
 				cmd->advertising |= ADVERTISED_Pause;
 		}
-	} else if (link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) {
-		if ((link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) ==
-		    BNXT_LINK_PAUSE_BOTH) {
-			cmd->supported |= SUPPORTED_Pause;
-		} else {
-			cmd->supported |= SUPPORTED_Asym_Pause;
-			if (link_info->force_pause_setting &
-			    BNXT_LINK_PAUSE_RX)
-				cmd->supported |= SUPPORTED_Pause;
-		}
 	}
 
 	cmd->port = PORT_NONE;
@@ -670,6 +645,9 @@
 	if (advertising & ADVERTISED_10000baseT_Full)
 		fw_speed_mask |= BNXT_LINK_SPEED_MSK_10GB;
 
+	if (advertising & ADVERTISED_40000baseCR4_Full)
+		fw_speed_mask |= BNXT_LINK_SPEED_MSK_40GB;
+
 	return fw_speed_mask;
 }
 
@@ -729,7 +707,7 @@
 		speed = ethtool_cmd_speed(cmd);
 		link_info->req_link_speed = bnxt_get_fw_speed(dev, speed);
 		link_info->req_duplex = BNXT_LINK_DUPLEX_FULL;
-		link_info->autoneg &= ~BNXT_AUTONEG_SPEED;
+		link_info->autoneg = 0;
 		link_info->advertising = 0;
 	}
 
@@ -748,8 +726,7 @@
 
 	if (BNXT_VF(bp))
 		return;
-	epause->autoneg = !!(link_info->auto_pause_setting &
-			     BNXT_LINK_PAUSE_BOTH);
+	epause->autoneg = !!(link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL);
 	epause->rx_pause = ((link_info->pause & BNXT_LINK_PAUSE_RX) != 0);
 	epause->tx_pause = ((link_info->pause & BNXT_LINK_PAUSE_TX) != 0);
 }
@@ -765,6 +742,9 @@
 		return rc;
 
 	if (epause->autoneg) {
+		if (!(link_info->autoneg & BNXT_AUTONEG_SPEED))
+			return -EINVAL;
+
 		link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
 		link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_BOTH;
 	} else {
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b15a60d..d7e01a7 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2445,8 +2445,7 @@
 	}
 
 	/* Link UP/DOWN event */
-	if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
-	    (priv->irq0_stat & UMAC_IRQ_LINK_EVENT)) {
+	if (priv->irq0_stat & UMAC_IRQ_LINK_EVENT) {
 		phy_mac_interrupt(priv->phydev,
 				  !!(priv->irq0_stat & UMAC_IRQ_LINK_UP));
 		priv->irq0_stat &= ~UMAC_IRQ_LINK_EVENT;
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 49eea89..3010080 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -7831,6 +7831,14 @@
 	return ret;
 }
 
+static bool tg3_tso_bug_gso_check(struct tg3_napi *tnapi, struct sk_buff *skb)
+{
+	/* Check if we will never have enough descriptors,
+	 * as gso_segs can be more than current ring size
+	 */
+	return skb_shinfo(skb)->gso_segs < tnapi->tx_pending / 3;
+}
+
 static netdev_tx_t tg3_start_xmit(struct sk_buff *, struct net_device *);
 
 /* Use GSO to workaround all TSO packets that meet HW bug conditions
@@ -7934,14 +7942,19 @@
 		 * vlan encapsulated.
 		 */
 		if (skb->protocol == htons(ETH_P_8021Q) ||
-		    skb->protocol == htons(ETH_P_8021AD))
-			return tg3_tso_bug(tp, tnapi, txq, skb);
+		    skb->protocol == htons(ETH_P_8021AD)) {
+			if (tg3_tso_bug_gso_check(tnapi, skb))
+				return tg3_tso_bug(tp, tnapi, txq, skb);
+			goto drop;
+		}
 
 		if (!skb_is_gso_v6(skb)) {
 			if (unlikely((ETH_HLEN + hdr_len) > 80) &&
-			    tg3_flag(tp, TSO_BUG))
-				return tg3_tso_bug(tp, tnapi, txq, skb);
-
+			    tg3_flag(tp, TSO_BUG)) {
+				if (tg3_tso_bug_gso_check(tnapi, skb))
+					return tg3_tso_bug(tp, tnapi, txq, skb);
+				goto drop;
+			}
 			ip_csum = iph->check;
 			ip_tot_len = iph->tot_len;
 			iph->check = 0;
@@ -8073,7 +8086,7 @@
 	if (would_hit_hwbug) {
 		tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, i);
 
-		if (mss) {
+		if (mss && tg3_tso_bug_gso_check(tnapi, skb)) {
 			/* If it's a TSO packet, do GSO instead of
 			 * allocating and copying to a large linear SKB
 			 */
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index 8727655..34d269c 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -1683,7 +1683,7 @@
 	dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no);
 	/* droq creation and local register settings. */
 	ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx);
-	if (ret_val == -1)
+	if (ret_val < 0)
 		return ret_val;
 
 	if (ret_val == 1) {
@@ -2524,7 +2524,7 @@
 
 	octeon_swap_8B_data(&resp->timestamp, 1);
 
-	if (unlikely((skb_shinfo(skb)->tx_flags | SKBTX_IN_PROGRESS) != 0)) {
+	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) != 0)) {
 		struct skb_shared_hwtstamps ts;
 		u64 ns = resp->timestamp;
 
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_droq.c b/drivers/net/ethernet/cavium/liquidio/octeon_droq.c
index 4dba86e..174072b 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_droq.c
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_droq.c
@@ -983,5 +983,5 @@
 
 create_droq_fail:
 	octeon_delete_droq(oct, q_no);
-	return -1;
+	return -ENOMEM;
 }
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 90ce93e..bfee298 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -574,8 +574,7 @@
 
 static void nicvf_rcv_pkt_handler(struct net_device *netdev,
 				  struct napi_struct *napi,
-				  struct cmp_queue *cq,
-				  struct cqe_rx_t *cqe_rx, int cqe_type)
+				  struct cqe_rx_t *cqe_rx)
 {
 	struct sk_buff *skb;
 	struct nicvf *nic = netdev_priv(netdev);
@@ -591,7 +590,7 @@
 	}
 
 	/* Check for errors */
-	err = nicvf_check_cqe_rx_errs(nic, cq, cqe_rx);
+	err = nicvf_check_cqe_rx_errs(nic, cqe_rx);
 	if (err && !cqe_rx->rb_cnt)
 		return;
 
@@ -682,8 +681,7 @@
 			   cq_idx, cq_desc->cqe_type);
 		switch (cq_desc->cqe_type) {
 		case CQE_TYPE_RX:
-			nicvf_rcv_pkt_handler(netdev, napi, cq,
-					      cq_desc, CQE_TYPE_RX);
+			nicvf_rcv_pkt_handler(netdev, napi, cq_desc);
 			work_done++;
 		break;
 		case CQE_TYPE_SEND:
@@ -1158,7 +1156,6 @@
 
 	/* Clear multiqset info */
 	nic->pnicvf = nic;
-	nic->sqs_count = 0;
 
 	return 0;
 }
@@ -1387,6 +1384,9 @@
 	drv_stats->tx_frames_ok = stats->tx_ucast_frames_ok +
 				  stats->tx_bcast_frames_ok +
 				  stats->tx_mcast_frames_ok;
+	drv_stats->rx_frames_ok = stats->rx_ucast_frames +
+				  stats->rx_bcast_frames +
+				  stats->rx_mcast_frames;
 	drv_stats->rx_drops = stats->rx_drop_red +
 			      stats->rx_drop_overrun;
 	drv_stats->tx_drops = stats->tx_drops;
@@ -1572,6 +1572,9 @@
 
 	nicvf_send_vf_struct(nic);
 
+	if (!pass1_silicon(nic->pdev))
+		nic->hw_tso = true;
+
 	/* Check if this VF is in QS only mode */
 	if (nic->sqs_mode)
 		return 0;
@@ -1591,9 +1594,6 @@
 
 	netdev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 
-	if (!pass1_silicon(nic->pdev))
-		nic->hw_tso = true;
-
 	netdev->netdev_ops = &nicvf_netdev_ops;
 	netdev->watchdog_timeo = NICVF_TX_TIMEOUT;
 
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
index 5adb208..0dd1abf 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
@@ -1328,16 +1328,12 @@
 }
 
 /* Check for errors in the receive cmp.queue entry */
-int nicvf_check_cqe_rx_errs(struct nicvf *nic,
-			    struct cmp_queue *cq, struct cqe_rx_t *cqe_rx)
+int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx)
 {
 	struct nicvf_hw_stats *stats = &nic->hw_stats;
-	struct nicvf_drv_stats *drv_stats = &nic->drv_stats;
 
-	if (!cqe_rx->err_level && !cqe_rx->err_opcode) {
-		drv_stats->rx_frames_ok++;
+	if (!cqe_rx->err_level && !cqe_rx->err_opcode)
 		return 0;
-	}
 
 	if (netif_msg_rx_err(nic))
 		netdev_err(nic->netdev,
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h
index c5030a7..6673e11 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h
@@ -338,8 +338,7 @@
 /* Stats */
 void nicvf_update_rq_stats(struct nicvf *nic, int rq_idx);
 void nicvf_update_sq_stats(struct nicvf *nic, int sq_idx);
-int nicvf_check_cqe_rx_errs(struct nicvf *nic,
-			    struct cmp_queue *cq, struct cqe_rx_t *cqe_rx);
+int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx);
 int nicvf_check_cqe_tx_errs(struct nicvf *nic,
 			    struct cmp_queue *cq, struct cqe_send_t *cqe_tx);
 #endif /* NICVF_QUEUES_H */
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index ee04caa..a89721f 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -681,6 +681,24 @@
 	return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
 }
 
+static int vpdstrtouint(char *s, int len, unsigned int base, unsigned int *val)
+{
+	char tok[len + 1];
+
+	memcpy(tok, s, len);
+	tok[len] = 0;
+	return kstrtouint(strim(tok), base, val);
+}
+
+static int vpdstrtou16(char *s, int len, unsigned int base, u16 *val)
+{
+	char tok[len + 1];
+
+	memcpy(tok, s, len);
+	tok[len] = 0;
+	return kstrtou16(strim(tok), base, val);
+}
+
 /**
  *	get_vpd_params - read VPD parameters from VPD EEPROM
  *	@adapter: adapter to read
@@ -709,19 +727,19 @@
 			return ret;
 	}
 
-	ret = kstrtouint(vpd.cclk_data, 10, &p->cclk);
+	ret = vpdstrtouint(vpd.cclk_data, vpd.cclk_len, 10, &p->cclk);
 	if (ret)
 		return ret;
-	ret = kstrtouint(vpd.mclk_data, 10, &p->mclk);
+	ret = vpdstrtouint(vpd.mclk_data, vpd.mclk_len, 10, &p->mclk);
 	if (ret)
 		return ret;
-	ret = kstrtouint(vpd.uclk_data, 10, &p->uclk);
+	ret = vpdstrtouint(vpd.uclk_data, vpd.uclk_len, 10, &p->uclk);
 	if (ret)
 		return ret;
-	ret = kstrtouint(vpd.mdc_data, 10, &p->mdc);
+	ret = vpdstrtouint(vpd.mdc_data, vpd.mdc_len, 10, &p->mdc);
 	if (ret)
 		return ret;
-	ret = kstrtouint(vpd.mt_data, 10, &p->mem_timing);
+	ret = vpdstrtouint(vpd.mt_data, vpd.mt_len, 10, &p->mem_timing);
 	if (ret)
 		return ret;
 	memcpy(p->sn, vpd.sn_data, SERNUM_LEN);
@@ -733,10 +751,12 @@
 	} else {
 		p->port_type[0] = hex_to_bin(vpd.port0_data[0]);
 		p->port_type[1] = hex_to_bin(vpd.port1_data[0]);
-		ret = kstrtou16(vpd.xaui0cfg_data, 16, &p->xauicfg[0]);
+		ret = vpdstrtou16(vpd.xaui0cfg_data, vpd.xaui0cfg_len, 16,
+				  &p->xauicfg[0]);
 		if (ret)
 			return ret;
-		ret = kstrtou16(vpd.xaui1cfg_data, 16, &p->xauicfg[1]);
+		ret = vpdstrtou16(vpd.xaui1cfg_data, vpd.xaui1cfg_len, 16,
+				  &p->xauicfg[1]);
 		if (ret)
 			return ret;
 	}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
index a8dda63..06bc2d2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
@@ -165,6 +165,7 @@
 	CH_PCI_ID_TABLE_FENTRY(0x5098),	/* Custom 2x40G QSFP */
 	CH_PCI_ID_TABLE_FENTRY(0x5099),	/* Custom 2x40G QSFP */
 	CH_PCI_ID_TABLE_FENTRY(0x509a),	/* Custom T520-CR */
+	CH_PCI_ID_TABLE_FENTRY(0x509b),	/* Custom T540-CR LOM */
 
 	/* T6 adapters:
 	 */
diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index 1671fa3..7ba6d53 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -33,7 +33,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"2.3.0.12"
+#define DRV_VERSION		"2.3.0.20"
 #define DRV_COPYRIGHT		"Copyright 2008-2013 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6
diff --git a/drivers/net/ethernet/cisco/enic/vnic_dev.c b/drivers/net/ethernet/cisco/enic/vnic_dev.c
index 1ffd105..1fdf5fe 100644
--- a/drivers/net/ethernet/cisco/enic/vnic_dev.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_dev.c
@@ -298,7 +298,8 @@
 			  int wait)
 {
 	struct devcmd2_controller *dc2c = vdev->devcmd2;
-	struct devcmd2_result *result = dc2c->result + dc2c->next_result;
+	struct devcmd2_result *result;
+	u8 color;
 	unsigned int i;
 	int delay, err;
 	u32 fetch_index, new_posted;
@@ -336,13 +337,17 @@
 	if (dc2c->cmd_ring[posted].flags & DEVCMD2_FNORESULT)
 		return 0;
 
+	result = dc2c->result + dc2c->next_result;
+	color = dc2c->color;
+
+	dc2c->next_result++;
+	if (dc2c->next_result == dc2c->result_size) {
+		dc2c->next_result = 0;
+		dc2c->color = dc2c->color ? 0 : 1;
+	}
+
 	for (delay = 0; delay < wait; delay++) {
-		if (result->color == dc2c->color) {
-			dc2c->next_result++;
-			if (dc2c->next_result == dc2c->result_size) {
-				dc2c->next_result = 0;
-				dc2c->color = dc2c->color ? 0 : 1;
-			}
+		if (result->color == color) {
 			if (result->error) {
 				err = result->error;
 				if (err != ERR_ECMDUNKNOWN ||
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index cf94b72..48d9194 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -128,7 +128,6 @@
 	struct resource *data_res;
 	struct resource	*addr_req;   /* resources requested */
 	struct resource *data_req;
-	struct resource *irq_res;
 
 	int		 irq_wake;
 
@@ -1300,22 +1299,16 @@
 dm9000_open(struct net_device *dev)
 {
 	struct board_info *db = netdev_priv(dev);
-	unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
 
 	if (netif_msg_ifup(db))
 		dev_dbg(db->dev, "enabling %s\n", dev->name);
 
-	/* If there is no IRQ type specified, default to something that
-	 * may work, and tell the user that this is a problem */
-
-	if (irqflags == IRQF_TRIGGER_NONE)
-		irqflags = irq_get_trigger_type(dev->irq);
-
-	if (irqflags == IRQF_TRIGGER_NONE)
+	/* If there is no IRQ type specified, tell the user that this is a
+	 * problem
+	 */
+	if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE)
 		dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
 
-	irqflags |= IRQF_SHARED;
-
 	/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
 	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
 	mdelay(1); /* delay needs by DM9000B */
@@ -1323,7 +1316,8 @@
 	/* Initialize DM9000 board */
 	dm9000_init_dm9000(dev);
 
-	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
+	if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED,
+			dev->name, dev))
 		return -EAGAIN;
 	/* Now that we have an interrupt handler hooked up we can unmask
 	 * our interrupts
@@ -1500,15 +1494,22 @@
 
 	db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	db->irq_res  = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 
-	if (db->addr_res == NULL || db->data_res == NULL ||
-	    db->irq_res == NULL) {
-		dev_err(db->dev, "insufficient resources\n");
+	if (!db->addr_res || !db->data_res) {
+		dev_err(db->dev, "insufficient resources addr=%p data=%p\n",
+			db->addr_res, db->data_res);
 		ret = -ENOENT;
 		goto out;
 	}
 
+	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0) {
+		dev_err(db->dev, "interrupt resource unavailable: %d\n",
+			ndev->irq);
+		ret = ndev->irq;
+		goto out;
+	}
+
 	db->irq_wake = platform_get_irq(pdev, 1);
 	if (db->irq_wake >= 0) {
 		dev_dbg(db->dev, "wakeup irq %d\n", db->irq_wake);
@@ -1570,7 +1571,6 @@
 
 	/* fill in parameters for net-dev structure */
 	ndev->base_addr = (unsigned long)db->io_addr;
-	ndev->irq	= db->irq_res->start;
 
 	/* ensure at least we have a default set of IO routines */
 	dm9000_set_io(db, iosize);
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index a7139f5..678f501 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -469,8 +469,8 @@
 		    goto failed;
 	    }
 	    /* Read MACID from CIS */
-	    for (i = 5; i < 11; i++)
-		    dev->dev_addr[i] = buf[i];
+	    for (i = 0; i < 6; i++)
+		    dev->dev_addr[i] = buf[i + 5];
 	    kfree(buf);
 	} else {
 	    if (pcmcia_get_mac_from_cis(link, dev))
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 662c2ee..b0ae69f 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -370,6 +370,11 @@
 	struct net_device *dev;
 	struct notifier_block cpu_notifier;
 	int rxq_def;
+	/* Protect the access to the percpu interrupt registers,
+	 * ensuring that the configuration remains coherent.
+	 */
+	spinlock_t lock;
+	bool is_stopped;
 
 	/* Core clock */
 	struct clk *clk;
@@ -1038,6 +1043,43 @@
 	}
 }
 
+static void mvneta_percpu_unmask_interrupt(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are unmasked, but actually only the ones
+	 * mapped to this CPU will be unmasked
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_MASK,
+		    MVNETA_RX_INTR_MASK_ALL |
+		    MVNETA_TX_INTR_MASK_ALL |
+		    MVNETA_MISCINTR_INTR_MASK);
+}
+
+static void mvneta_percpu_mask_interrupt(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are masked, but actually only the ones
+	 * mapped to this CPU will be masked
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+}
+
+static void mvneta_percpu_clear_intr_cause(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are cleared, but actually only the ones
+	 * mapped to this CPU will be cleared
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+}
+
 /* This method sets defaults to the NETA port:
  *	Clears interrupt Cause and Mask registers.
  *	Clears all MAC tables.
@@ -1055,14 +1097,10 @@
 	int max_cpu = num_present_cpus();
 
 	/* Clear all Cause registers */
-	mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+	on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
 
 	/* Mask all interrupts */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 	mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
 
 	/* Enable MBUS Retry bit16 */
@@ -2528,34 +2566,9 @@
 	return 0;
 }
 
-static void mvneta_percpu_unmask_interrupt(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	/* All the queue are unmasked, but actually only the ones
-	 * maped to this CPU will be unmasked
-	 */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-		    MVNETA_RX_INTR_MASK_ALL |
-		    MVNETA_TX_INTR_MASK_ALL |
-		    MVNETA_MISCINTR_INTR_MASK);
-}
-
-static void mvneta_percpu_mask_interrupt(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	/* All the queue are masked, but actually only the ones
-	 * maped to this CPU will be masked
-	 */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
-}
-
 static void mvneta_start_dev(struct mvneta_port *pp)
 {
-	unsigned int cpu;
+	int cpu;
 
 	mvneta_max_rx_size_set(pp, pp->pkt_size);
 	mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
@@ -2564,16 +2577,15 @@
 	mvneta_port_enable(pp);
 
 	/* Enable polling on the port */
-	for_each_present_cpu(cpu) {
+	for_each_online_cpu(cpu) {
 		struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
 
 		napi_enable(&port->napi);
 	}
 
 	/* Unmask interrupts. It has to be done from each CPU */
-	for_each_online_cpu(cpu)
-		smp_call_function_single(cpu, mvneta_percpu_unmask_interrupt,
-					 pp, true);
+	on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
+
 	mvreg_write(pp, MVNETA_INTR_MISC_MASK,
 		    MVNETA_CAUSE_PHY_STATUS_CHANGE |
 		    MVNETA_CAUSE_LINK_CHANGE |
@@ -2589,7 +2601,7 @@
 
 	phy_stop(pp->phy_dev);
 
-	for_each_present_cpu(cpu) {
+	for_each_online_cpu(cpu) {
 		struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
 
 		napi_disable(&port->napi);
@@ -2604,13 +2616,10 @@
 	mvneta_port_disable(pp);
 
 	/* Clear all ethernet port interrupts */
-	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+	on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
 
 	/* Mask all ethernet port interrupts */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 
 	mvneta_tx_reset(pp);
 	mvneta_rx_reset(pp);
@@ -2847,11 +2856,20 @@
 	disable_percpu_irq(pp->dev->irq);
 }
 
+/* Electing a CPU must be done in an atomic way: it should be done
+ * after or before the removal/insertion of a CPU and this function is
+ * not reentrant.
+ */
 static void mvneta_percpu_elect(struct mvneta_port *pp)
 {
-	int online_cpu_idx, max_cpu, cpu, i = 0;
+	int elected_cpu = 0, max_cpu, cpu, i = 0;
 
-	online_cpu_idx = pp->rxq_def % num_online_cpus();
+	/* Use the cpu associated to the rxq when it is online, in all
+	 * the other cases, use the cpu 0 which can't be offline.
+	 */
+	if (cpu_online(pp->rxq_def))
+		elected_cpu = pp->rxq_def;
+
 	max_cpu = num_present_cpus();
 
 	for_each_online_cpu(cpu) {
@@ -2862,7 +2880,7 @@
 			if ((rxq % max_cpu) == cpu)
 				rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
 
-		if (i == online_cpu_idx)
+		if (cpu == elected_cpu)
 			/* Map the default receive queue queue to the
 			 * elected CPU
 			 */
@@ -2873,7 +2891,7 @@
 		 * the CPU bound to the default RX queue
 		 */
 		if (txq_number == 1)
-			txq_map = (i == online_cpu_idx) ?
+			txq_map = (cpu == elected_cpu) ?
 				MVNETA_CPU_TXQ_ACCESS(1) : 0;
 		else
 			txq_map = mvreg_read(pp, MVNETA_CPU_MAP(cpu)) &
@@ -2902,6 +2920,14 @@
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
+		spin_lock(&pp->lock);
+		/* Configuring the driver for a new CPU while the
+		 * driver is stopping is racy, so just avoid it.
+		 */
+		if (pp->is_stopped) {
+			spin_unlock(&pp->lock);
+			break;
+		}
 		netif_tx_stop_all_queues(pp->dev);
 
 		/* We have to synchronise on tha napi of each CPU
@@ -2917,9 +2943,7 @@
 		}
 
 		/* Mask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+		on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 		napi_enable(&port->napi);
 
 
@@ -2934,27 +2958,25 @@
 		 */
 		mvneta_percpu_elect(pp);
 
-		/* Unmask all ethernet port interrupts, as this
-		 * notifier is called for each CPU then the CPU to
-		 * Queue mapping is applied
-		 */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-			MVNETA_RX_INTR_MASK(rxq_number) |
-			MVNETA_TX_INTR_MASK(txq_number) |
-			MVNETA_MISCINTR_INTR_MASK);
+		/* Unmask all ethernet port interrupts */
+		on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
 		mvreg_write(pp, MVNETA_INTR_MISC_MASK,
 			MVNETA_CAUSE_PHY_STATUS_CHANGE |
 			MVNETA_CAUSE_LINK_CHANGE |
 			MVNETA_CAUSE_PSC_SYNC_CHANGE);
 		netif_tx_start_all_queues(pp->dev);
+		spin_unlock(&pp->lock);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		netif_tx_stop_all_queues(pp->dev);
+		/* Thanks to this lock we are sure that any pending
+		 * cpu election is done
+		 */
+		spin_lock(&pp->lock);
 		/* Mask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+		on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
+		spin_unlock(&pp->lock);
 
 		napi_synchronize(&port->napi);
 		napi_disable(&port->napi);
@@ -2968,12 +2990,11 @@
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		/* Check if a new CPU must be elected now this on is down */
+		spin_lock(&pp->lock);
 		mvneta_percpu_elect(pp);
+		spin_unlock(&pp->lock);
 		/* Unmask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-			MVNETA_RX_INTR_MASK(rxq_number) |
-			MVNETA_TX_INTR_MASK(txq_number) |
-			MVNETA_MISCINTR_INTR_MASK);
+		on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
 		mvreg_write(pp, MVNETA_INTR_MISC_MASK,
 			MVNETA_CAUSE_PHY_STATUS_CHANGE |
 			MVNETA_CAUSE_LINK_CHANGE |
@@ -2988,7 +3009,7 @@
 static int mvneta_open(struct net_device *dev)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
-	int ret, cpu;
+	int ret;
 
 	pp->pkt_size = MVNETA_RX_PKT_SIZE(pp->dev->mtu);
 	pp->frag_size = SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(pp->pkt_size)) +
@@ -3010,22 +3031,12 @@
 		goto err_cleanup_txqs;
 	}
 
-	/* Even though the documentation says that request_percpu_irq
-	 * doesn't enable the interrupts automatically, it actually
-	 * does so on the local CPU.
-	 *
-	 * Make sure it's disabled.
-	 */
-	mvneta_percpu_disable(pp);
-
 	/* Enable per-CPU interrupt on all the CPU to handle our RX
 	 * queue interrupts
 	 */
-	for_each_online_cpu(cpu)
-		smp_call_function_single(cpu, mvneta_percpu_enable,
-					 pp, true);
+	on_each_cpu(mvneta_percpu_enable, pp, true);
 
-
+	pp->is_stopped = false;
 	/* Register a CPU notifier to handle the case where our CPU
 	 * might be taken offline.
 	 */
@@ -3057,13 +3068,20 @@
 static int mvneta_stop(struct net_device *dev)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
-	int cpu;
 
+	/* Inform that we are stopping so we don't want to setup the
+	 * driver for new CPUs in the notifiers
+	 */
+	spin_lock(&pp->lock);
+	pp->is_stopped = true;
 	mvneta_stop_dev(pp);
 	mvneta_mdio_remove(pp);
 	unregister_cpu_notifier(&pp->cpu_notifier);
-	for_each_present_cpu(cpu)
-		smp_call_function_single(cpu, mvneta_percpu_disable, pp, true);
+	/* Now that the notifier are unregistered, we can release le
+	 * lock
+	 */
+	spin_unlock(&pp->lock);
+	on_each_cpu(mvneta_percpu_disable, pp, true);
 	free_percpu_irq(dev->irq, pp->ports);
 	mvneta_cleanup_rxqs(pp);
 	mvneta_cleanup_txqs(pp);
@@ -3312,9 +3330,7 @@
 
 	netif_tx_stop_all_queues(pp->dev);
 
-	for_each_online_cpu(cpu)
-		smp_call_function_single(cpu, mvneta_percpu_mask_interrupt,
-					 pp, true);
+	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 
 	/* We have to synchronise on the napi of each CPU */
 	for_each_online_cpu(cpu) {
@@ -3335,7 +3351,9 @@
 	mvreg_write(pp, MVNETA_PORT_CONFIG, val);
 
 	/* Update the elected CPU matching the new rxq_def */
+	spin_lock(&pp->lock);
 	mvneta_percpu_elect(pp);
+	spin_unlock(&pp->lock);
 
 	/* We have to synchronise on the napi of each CPU */
 	for_each_online_cpu(cpu) {
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index a4beccf..c797971a 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -3061,7 +3061,7 @@
 
 		pe = kzalloc(sizeof(*pe), GFP_KERNEL);
 		if (!pe)
-			return -1;
+			return -ENOMEM;
 		mvpp2_prs_tcam_lu_set(pe, MVPP2_PRS_LU_MAC);
 		pe->index = tid;
 
@@ -3077,7 +3077,7 @@
 	if (pmap == 0) {
 		if (add) {
 			kfree(pe);
-			return -1;
+			return -EINVAL;
 		}
 		mvpp2_prs_hw_inv(priv, pe->index);
 		priv->prs_shadow[pe->index].valid = false;
diff --git a/drivers/net/ethernet/mellanox/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 715de8a..c7e9399 100644
--- a/drivers/net/ethernet/mellanox/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c
@@ -182,10 +182,17 @@
 		err = mlx4_reset_slave(dev);
 	else
 		err = mlx4_reset_master(dev);
-	BUG_ON(err != 0);
 
+	if (!err) {
+		mlx4_err(dev, "device was reset successfully\n");
+	} else {
+		/* EEH could have disabled the PCI channel during reset. That's
+		 * recoverable and the PCI error flow will handle it.
+		 */
+		if (!pci_channel_offline(dev->persist->pdev))
+			BUG_ON(1);
+	}
 	dev->persist->state |= MLX4_DEVICE_STATE_INTERNAL_ERROR;
-	mlx4_err(dev, "device was reset successfully\n");
 	mutex_unlock(&persist->device_state_mutex);
 
 	/* At that step HW was already reset, now notify clients */
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index d48d579..e94ca1c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2429,7 +2429,7 @@
 	flush_workqueue(priv->mfunc.master.comm_wq);
 	destroy_workqueue(priv->mfunc.master.comm_wq);
 err_slaves:
-	while (--i) {
+	while (i--) {
 		for (port = 1; port <= MLX4_MAX_PORTS; port++)
 			kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]);
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index 3348e64..a849da9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -318,7 +318,9 @@
 	if (timestamp_en)
 		cq_context->flags  |= cpu_to_be32(1 << 19);
 
-	cq_context->logsize_usrpage = cpu_to_be32((ilog2(nent) << 24) | uar->index);
+	cq_context->logsize_usrpage =
+		cpu_to_be32((ilog2(nent) << 24) |
+			    mlx4_to_hw_uar_index(dev, uar->index));
 	cq_context->comp_eqn	    = priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(vector)].eqn;
 	cq_context->log_page_size   = mtt->page_shift - MLX4_ICM_PAGE_SHIFT;
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index 038f9ce..1494997 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -236,6 +236,24 @@
 	.enable		= mlx4_en_phc_enable,
 };
 
+#define MLX4_EN_WRAP_AROUND_SEC	10ULL
+
+/* This function calculates the max shift that enables the user range
+ * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register.
+ */
+static u32 freq_to_shift(u16 freq)
+{
+	u32 freq_khz = freq * 1000;
+	u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
+	u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ?
+		max_val_cycles : roundup_pow_of_two(max_val_cycles) - 1;
+	/* calculate max possible multiplier in order to fit in 64bit */
+	u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded);
+
+	/* This comes from the reverse of clocksource_khz2mult */
+	return ilog2(div_u64(max_mul * freq_khz, 1000000));
+}
+
 void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
 {
 	struct mlx4_dev *dev = mdev->dev;
@@ -254,12 +272,7 @@
 	memset(&mdev->cycles, 0, sizeof(mdev->cycles));
 	mdev->cycles.read = mlx4_en_read_clock;
 	mdev->cycles.mask = CLOCKSOURCE_MASK(48);
-	/* Using shift to make calculation more accurate. Since current HW
-	 * clock frequency is 427 MHz, and cycles are given using a 48 bits
-	 * register, the biggest shift when calculating using u64, is 14
-	 * (max_cycles * multiplier < 2^64)
-	 */
-	mdev->cycles.shift = 14;
+	mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock);
 	mdev->cycles.mult =
 		clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift);
 	mdev->nominal_c_mult = mdev->cycles.mult;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 01d6a96..96d95cb 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2353,8 +2353,6 @@
 	/* set offloads */
 	priv->dev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
 				      NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL;
-	priv->dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
-	priv->dev->features    |= NETIF_F_GSO_UDP_TUNNEL;
 }
 
 static void mlx4_en_del_vxlan_offloads(struct work_struct *work)
@@ -2365,8 +2363,6 @@
 	/* unset offloads */
 	priv->dev->hw_enc_features &= ~(NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
 				      NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL);
-	priv->dev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL;
-	priv->dev->features    &= ~NETIF_F_GSO_UDP_TUNNEL;
 
 	ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
 				  VXLAN_STEER_BY_OUTER_MAC, 0);
@@ -2989,6 +2985,11 @@
 		priv->rss_hash_fn = ETH_RSS_HASH_TOP;
 	}
 
+	if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
+		dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
+		dev->features    |= NETIF_F_GSO_UDP_TUNNEL;
+	}
+
 	mdev->pndev[port] = dev;
 	mdev->upper[port] = NULL;
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index ee99e67..3904b5f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -238,11 +238,11 @@
 	stats->collisions = 0;
 	stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP);
 	stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength);
-	stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+	stats->rx_over_errors = 0;
 	stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC);
 	stats->rx_frame_errors = 0;
 	stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
-	stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+	stats->rx_missed_errors = 0;
 	stats->tx_aborted_errors = 0;
 	stats->tx_carrier_errors = 0;
 	stats->tx_fifo_errors = 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
index 12aab5a..02e925d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
@@ -58,7 +58,8 @@
 	} else {
 		context->sq_size_stride = ilog2(TXBB_SIZE) - 4;
 	}
-	context->usr_page = cpu_to_be32(mdev->priv_uar.index);
+	context->usr_page = cpu_to_be32(mlx4_to_hw_uar_index(mdev->dev,
+					mdev->priv_uar.index));
 	context->local_qpn = cpu_to_be32(qpn);
 	context->pri_path.ackto = 1 & 0x07;
 	context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 4421bf5..e0946ab 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -213,7 +213,9 @@
 	mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
 				ring->cqn, user_prio, &ring->context);
 	if (ring->bf_alloced)
-		ring->context.usr_page = cpu_to_be32(ring->bf.uar->index);
+		ring->context.usr_page =
+			cpu_to_be32(mlx4_to_hw_uar_index(mdev->dev,
+							 ring->bf.uar->index));
 
 	err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context,
 			       &ring->qp, &ring->qp_state);
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 4696053..f613977 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -940,9 +940,10 @@
 
 	if (!priv->eq_table.uar_map[index]) {
 		priv->eq_table.uar_map[index] =
-			ioremap(pci_resource_start(dev->persist->pdev, 2) +
-				((eq->eqn / 4) << PAGE_SHIFT),
-				PAGE_SIZE);
+			ioremap(
+				pci_resource_start(dev->persist->pdev, 2) +
+				((eq->eqn / 4) << (dev->uar_page_shift)),
+				(1 << (dev->uar_page_shift)));
 		if (!priv->eq_table.uar_map[index]) {
 			mlx4_err(dev, "Couldn't map EQ doorbell for EQN 0x%06x\n",
 				 eq->eqn);
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index f1b6d21..2cc3c62 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -168,6 +168,20 @@
 
 static atomic_t pf_loading = ATOMIC_INIT(0);
 
+static inline void mlx4_set_num_reserved_uars(struct mlx4_dev *dev,
+					      struct mlx4_dev_cap *dev_cap)
+{
+	/* The reserved_uars is calculated by system page size unit.
+	 * Therefore, adjustment is added when the uar page size is less
+	 * than the system page size
+	 */
+	dev->caps.reserved_uars	=
+		max_t(int,
+		      mlx4_get_num_reserved_uar(dev),
+		      dev_cap->reserved_uars /
+			(1 << (PAGE_SHIFT - dev->uar_page_shift)));
+}
+
 int mlx4_check_port_params(struct mlx4_dev *dev,
 			   enum mlx4_port_type *port_type)
 {
@@ -386,8 +400,6 @@
 	dev->caps.reserved_mtts      = dev_cap->reserved_mtts;
 	dev->caps.reserved_mrws	     = dev_cap->reserved_mrws;
 
-	/* The first 128 UARs are used for EQ doorbells */
-	dev->caps.reserved_uars	     = max_t(int, 128, dev_cap->reserved_uars);
 	dev->caps.reserved_pds	     = dev_cap->reserved_pds;
 	dev->caps.reserved_xrcds     = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ?
 					dev_cap->reserved_xrcds : 0;
@@ -405,6 +417,15 @@
 	dev->caps.max_gso_sz	     = dev_cap->max_gso_sz;
 	dev->caps.max_rss_tbl_sz     = dev_cap->max_rss_tbl_sz;
 
+	/* Save uar page shift */
+	if (!mlx4_is_slave(dev)) {
+		/* Virtual PCI function needs to determine UAR page size from
+		 * firmware. Only master PCI function can set the uar page size
+		 */
+		dev->uar_page_shift = DEFAULT_UAR_PAGE_SHIFT;
+		mlx4_set_num_reserved_uars(dev, dev_cap);
+	}
+
 	if (dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PHV_EN) {
 		struct mlx4_init_hca_param hca_param;
 
@@ -815,16 +836,25 @@
 		return -ENODEV;
 	}
 
-	/* slave gets uar page size from QUERY_HCA fw command */
-	dev->caps.uar_page_size = 1 << (hca_param.uar_page_sz + 12);
+	/* Set uar_page_shift for VF */
+	dev->uar_page_shift = hca_param.uar_page_sz + 12;
 
-	/* TODO: relax this assumption */
-	if (dev->caps.uar_page_size != PAGE_SIZE) {
-		mlx4_err(dev, "UAR size:%d != kernel PAGE_SIZE of %ld\n",
-			 dev->caps.uar_page_size, PAGE_SIZE);
-		return -ENODEV;
+	/* Make sure the master uar page size is valid */
+	if (dev->uar_page_shift > PAGE_SHIFT) {
+		mlx4_err(dev,
+			 "Invalid configuration: uar page size is larger than system page size\n");
+		return  -ENODEV;
 	}
 
+	/* Set reserved_uars based on the uar_page_shift */
+	mlx4_set_num_reserved_uars(dev, &dev_cap);
+
+	/* Although uar page size in FW differs from system page size,
+	 * upper software layers (mlx4_ib, mlx4_en and part of mlx4_core)
+	 * still works with assumption that uar page size == system page size
+	 */
+	dev->caps.uar_page_size = PAGE_SIZE;
+
 	memset(&func_cap, 0, sizeof(func_cap));
 	err = mlx4_QUERY_FUNC_CAP(dev, 0, &func_cap);
 	if (err) {
@@ -2179,8 +2209,12 @@
 
 		dev->caps.max_fmr_maps = (1 << (32 - ilog2(dev->caps.num_mpts))) - 1;
 
-		init_hca.log_uar_sz = ilog2(dev->caps.num_uars);
-		init_hca.uar_page_sz = PAGE_SHIFT - 12;
+		/* Always set UAR page size 4KB, set log_uar_sz accordingly */
+		init_hca.log_uar_sz = ilog2(dev->caps.num_uars) +
+				      PAGE_SHIFT -
+				      DEFAULT_UAR_PAGE_SHIFT;
+		init_hca.uar_page_sz = DEFAULT_UAR_PAGE_SHIFT - 12;
+
 		init_hca.mw_enabled = 0;
 		if (dev->caps.flags & MLX4_DEV_CAP_FLAG_MEM_WINDOW ||
 		    dev->caps.bmme_flags & MLX4_BMME_FLAG_TYPE_2_WIN)
diff --git a/drivers/net/ethernet/mellanox/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c
index 609c59d..b3cc3ab 100644
--- a/drivers/net/ethernet/mellanox/mlx4/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/pd.c
@@ -269,9 +269,15 @@
 
 int mlx4_init_uar_table(struct mlx4_dev *dev)
 {
-	if (dev->caps.num_uars <= 128) {
-		mlx4_err(dev, "Only %d UAR pages (need more than 128)\n",
-			 dev->caps.num_uars);
+	int num_reserved_uar = mlx4_get_num_reserved_uar(dev);
+
+	mlx4_dbg(dev, "uar_page_shift = %d", dev->uar_page_shift);
+	mlx4_dbg(dev, "Effective reserved_uars=%d", dev->caps.reserved_uars);
+
+	if (dev->caps.num_uars <= num_reserved_uar) {
+		mlx4_err(
+			dev, "Only %d UAR pages (need more than %d)\n",
+			dev->caps.num_uars, num_reserved_uar);
 		mlx4_err(dev, "Increase firmware log2_uar_bar_megabytes?\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index b46dbe2..25ce1b0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -915,11 +915,13 @@
 
 	spin_lock_irq(mlx4_tlock(dev));
 	r = find_res(dev, counter_index, RES_COUNTER);
-	if (!r || r->owner != slave)
+	if (!r || r->owner != slave) {
 		ret = -EINVAL;
-	counter = container_of(r, struct res_counter, com);
-	if (!counter->port)
-		counter->port = port;
+	} else {
+		counter = container_of(r, struct res_counter, com);
+		if (!counter->port)
+			counter->port = port;
+	}
 
 	spin_unlock_irq(mlx4_tlock(dev));
 	return ret;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 6a3e430..d4e1c30 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2024,18 +2024,37 @@
 					    vf_stats);
 }
 
-static struct net_device_ops mlx5e_netdev_ops = {
+static const struct net_device_ops mlx5e_netdev_ops_basic = {
 	.ndo_open                = mlx5e_open,
 	.ndo_stop                = mlx5e_close,
 	.ndo_start_xmit          = mlx5e_xmit,
 	.ndo_get_stats64         = mlx5e_get_stats,
 	.ndo_set_rx_mode         = mlx5e_set_rx_mode,
 	.ndo_set_mac_address     = mlx5e_set_mac,
-	.ndo_vlan_rx_add_vid	 = mlx5e_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid	 = mlx5e_vlan_rx_kill_vid,
+	.ndo_vlan_rx_add_vid     = mlx5e_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid    = mlx5e_vlan_rx_kill_vid,
 	.ndo_set_features        = mlx5e_set_features,
-	.ndo_change_mtu		 = mlx5e_change_mtu,
-	.ndo_do_ioctl		 = mlx5e_ioctl,
+	.ndo_change_mtu          = mlx5e_change_mtu,
+	.ndo_do_ioctl            = mlx5e_ioctl,
+};
+
+static const struct net_device_ops mlx5e_netdev_ops_sriov = {
+	.ndo_open                = mlx5e_open,
+	.ndo_stop                = mlx5e_close,
+	.ndo_start_xmit          = mlx5e_xmit,
+	.ndo_get_stats64         = mlx5e_get_stats,
+	.ndo_set_rx_mode         = mlx5e_set_rx_mode,
+	.ndo_set_mac_address     = mlx5e_set_mac,
+	.ndo_vlan_rx_add_vid     = mlx5e_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid    = mlx5e_vlan_rx_kill_vid,
+	.ndo_set_features        = mlx5e_set_features,
+	.ndo_change_mtu          = mlx5e_change_mtu,
+	.ndo_do_ioctl            = mlx5e_ioctl,
+	.ndo_set_vf_mac          = mlx5e_set_vf_mac,
+	.ndo_set_vf_vlan         = mlx5e_set_vf_vlan,
+	.ndo_get_vf_config       = mlx5e_get_vf_config,
+	.ndo_set_vf_link_state   = mlx5e_set_vf_link_state,
+	.ndo_get_vf_stats        = mlx5e_get_vf_stats,
 };
 
 static int mlx5e_check_required_hca_cap(struct mlx5_core_dev *mdev)
@@ -2137,18 +2156,11 @@
 
 	SET_NETDEV_DEV(netdev, &mdev->pdev->dev);
 
-	if (priv->params.num_tc > 1)
-		mlx5e_netdev_ops.ndo_select_queue = mlx5e_select_queue;
+	if (MLX5_CAP_GEN(mdev, vport_group_manager))
+		netdev->netdev_ops = &mlx5e_netdev_ops_sriov;
+	else
+		netdev->netdev_ops = &mlx5e_netdev_ops_basic;
 
-	if (MLX5_CAP_GEN(mdev, vport_group_manager)) {
-		mlx5e_netdev_ops.ndo_set_vf_mac = mlx5e_set_vf_mac;
-		mlx5e_netdev_ops.ndo_set_vf_vlan = mlx5e_set_vf_vlan;
-		mlx5e_netdev_ops.ndo_get_vf_config = mlx5e_get_vf_config;
-		mlx5e_netdev_ops.ndo_set_vf_link_state = mlx5e_set_vf_link_state;
-		mlx5e_netdev_ops.ndo_get_vf_stats = mlx5e_get_vf_stats;
-	}
-
-	netdev->netdev_ops        = &mlx5e_netdev_ops;
 	netdev->watchdog_timeo    = 15 * HZ;
 
 	netdev->ethtool_ops	  = &mlx5e_ethtool_ops;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/port.h b/drivers/net/ethernet/mellanox/mlxsw/port.h
index 726f543..ae65b99 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/port.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/port.h
@@ -49,7 +49,7 @@
 #define MLXSW_PORT_MID			0xd000
 
 #define MLXSW_PORT_MAX_PHY_PORTS	0x40
-#define MLXSW_PORT_MAX_PORTS		MLXSW_PORT_MAX_PHY_PORTS
+#define MLXSW_PORT_MAX_PORTS		(MLXSW_PORT_MAX_PHY_PORTS + 1)
 
 #define MLXSW_PORT_DEVID_BITS_OFFSET	10
 #define MLXSW_PORT_PHY_BITS_OFFSET	4
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index bb77e22..ffe4c03 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -873,6 +873,62 @@
 	}
 }
 
+/* SPAFT - Switch Port Acceptable Frame Types
+ * ------------------------------------------
+ * The Switch Port Acceptable Frame Types register configures the frame
+ * admittance of the port.
+ */
+#define MLXSW_REG_SPAFT_ID 0x2010
+#define MLXSW_REG_SPAFT_LEN 0x08
+
+static const struct mlxsw_reg_info mlxsw_reg_spaft = {
+	.id = MLXSW_REG_SPAFT_ID,
+	.len = MLXSW_REG_SPAFT_LEN,
+};
+
+/* reg_spaft_local_port
+ * Local port number.
+ * Access: Index
+ *
+ * Note: CPU port is not supported (all tag types are allowed).
+ */
+MLXSW_ITEM32(reg, spaft, local_port, 0x00, 16, 8);
+
+/* reg_spaft_sub_port
+ * Virtual port within the physical port.
+ * Should be set to 0 when virtual ports are not enabled on the port.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spaft, sub_port, 0x00, 8, 8);
+
+/* reg_spaft_allow_untagged
+ * When set, untagged frames on the ingress are allowed (default).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spaft, allow_untagged, 0x04, 31, 1);
+
+/* reg_spaft_allow_prio_tagged
+ * When set, priority tagged frames on the ingress are allowed (default).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spaft, allow_prio_tagged, 0x04, 30, 1);
+
+/* reg_spaft_allow_tagged
+ * When set, tagged frames on the ingress are allowed (default).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spaft, allow_tagged, 0x04, 29, 1);
+
+static inline void mlxsw_reg_spaft_pack(char *payload, u8 local_port,
+					bool allow_untagged)
+{
+	MLXSW_REG_ZERO(spaft, payload);
+	mlxsw_reg_spaft_local_port_set(payload, local_port);
+	mlxsw_reg_spaft_allow_untagged_set(payload, allow_untagged);
+	mlxsw_reg_spaft_allow_prio_tagged_set(payload, true);
+	mlxsw_reg_spaft_allow_tagged_set(payload, true);
+}
+
 /* SFGC - Switch Flooding Group Configuration
  * ------------------------------------------
  * The following register controls the association of flooding tables and MIDs
@@ -3203,6 +3259,8 @@
 		return "SPVID";
 	case MLXSW_REG_SPVM_ID:
 		return "SPVM";
+	case MLXSW_REG_SPAFT_ID:
+		return "SPAFT";
 	case MLXSW_REG_SFGC_ID:
 		return "SFGC";
 	case MLXSW_REG_SFTR_ID:
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 217856b..09ce451 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2123,6 +2123,8 @@
 	if (flush_fdb && mlxsw_sp_port_fdb_flush(mlxsw_sp_port))
 		netdev_err(mlxsw_sp_port->dev, "Failed to flush FDB\n");
 
+	mlxsw_sp_port_pvid_set(mlxsw_sp_port, 1);
+
 	mlxsw_sp_port->learning = 0;
 	mlxsw_sp_port->learning_sync = 0;
 	mlxsw_sp_port->uc_flood = 0;
@@ -2746,6 +2748,13 @@
 		goto err_vport_flood_set;
 	}
 
+	err = mlxsw_sp_port_stp_state_set(mlxsw_sp_vport, vid,
+					  MLXSW_REG_SPMS_STATE_FORWARDING);
+	if (err) {
+		netdev_err(dev, "Failed to set STP state\n");
+		goto err_port_stp_state_set;
+	}
+
 	if (flush_fdb && mlxsw_sp_vport_fdb_flush(mlxsw_sp_vport))
 		netdev_err(dev, "Failed to flush FDB\n");
 
@@ -2763,6 +2772,7 @@
 
 	return 0;
 
+err_port_stp_state_set:
 err_vport_flood_set:
 err_port_vid_learning_set:
 err_port_vid_to_fid_validate:
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 7f42eb1..3b89ed2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -254,5 +254,6 @@
 int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 vfid,
 			     bool set, bool only_uc);
 void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port);
+int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid);
 
 #endif
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index e492ca2..7b56098 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -370,7 +370,8 @@
 	return err;
 }
 
-static int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid)
+static int __mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port,
+				    u16 vid)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
 	char spvid_pl[MLXSW_REG_SPVID_LEN];
@@ -379,6 +380,53 @@
 	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvid), spvid_pl);
 }
 
+static int mlxsw_sp_port_allow_untagged_set(struct mlxsw_sp_port *mlxsw_sp_port,
+					    bool allow)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	char spaft_pl[MLXSW_REG_SPAFT_LEN];
+
+	mlxsw_reg_spaft_pack(spaft_pl, mlxsw_sp_port->local_port, allow);
+	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spaft), spaft_pl);
+}
+
+int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid)
+{
+	struct net_device *dev = mlxsw_sp_port->dev;
+	int err;
+
+	if (!vid) {
+		err = mlxsw_sp_port_allow_untagged_set(mlxsw_sp_port, false);
+		if (err) {
+			netdev_err(dev, "Failed to disallow untagged traffic\n");
+			return err;
+		}
+	} else {
+		err = __mlxsw_sp_port_pvid_set(mlxsw_sp_port, vid);
+		if (err) {
+			netdev_err(dev, "Failed to set PVID\n");
+			return err;
+		}
+
+		/* Only allow if not already allowed. */
+		if (!mlxsw_sp_port->pvid) {
+			err = mlxsw_sp_port_allow_untagged_set(mlxsw_sp_port,
+							       true);
+			if (err) {
+				netdev_err(dev, "Failed to allow untagged traffic\n");
+				goto err_port_allow_untagged_set;
+			}
+		}
+	}
+
+	mlxsw_sp_port->pvid = vid;
+	return 0;
+
+err_port_allow_untagged_set:
+	__mlxsw_sp_port_pvid_set(mlxsw_sp_port, mlxsw_sp_port->pvid);
+	return err;
+}
+
 static int mlxsw_sp_fid_create(struct mlxsw_sp *mlxsw_sp, u16 fid)
 {
 	char sfmr_pl[MLXSW_REG_SFMR_LEN];
@@ -540,7 +588,12 @@
 			netdev_err(dev, "Unable to add PVID %d\n", vid_begin);
 			goto err_port_pvid_set;
 		}
-		mlxsw_sp_port->pvid = vid_begin;
+	} else if (!flag_pvid && old_pvid >= vid_begin && old_pvid <= vid_end) {
+		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 0);
+		if (err) {
+			netdev_err(dev, "Unable to del PVID\n");
+			goto err_port_pvid_set;
+		}
 	}
 
 	/* Changing activity bits only if HW operation succeded */
@@ -892,20 +945,18 @@
 		return err;
 	}
 
+	if (init)
+		goto out;
+
 	pvid = mlxsw_sp_port->pvid;
-	if (pvid >= vid_begin && pvid <= vid_end && pvid != 1) {
-		/* Default VLAN is always 1 */
-		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 1);
+	if (pvid >= vid_begin && pvid <= vid_end) {
+		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 0);
 		if (err) {
 			netdev_err(dev, "Unable to del PVID %d\n", pvid);
 			return err;
 		}
-		mlxsw_sp_port->pvid = 1;
 	}
 
-	if (init)
-		goto out;
-
 	err = __mlxsw_sp_port_flood_set(mlxsw_sp_port, vid_begin, vid_end,
 					false, false);
 	if (err) {
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 17d5571..537974c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -6137,28 +6137,28 @@
 		sw_cnt_1ms_ini = 16000000/rg_saw_cnt;
 		sw_cnt_1ms_ini &= 0x0fff;
 		data = r8168_mac_ocp_read(tp, 0xd412);
-		data &= 0x0fff;
+		data &= ~0x0fff;
 		data |= sw_cnt_1ms_ini;
 		r8168_mac_ocp_write(tp, 0xd412, data);
 	}
 
 	data = r8168_mac_ocp_read(tp, 0xe056);
-	data &= 0xf0;
-	data |= 0x07;
+	data &= ~0xf0;
+	data |= 0x70;
 	r8168_mac_ocp_write(tp, 0xe056, data);
 
 	data = r8168_mac_ocp_read(tp, 0xe052);
-	data &= 0x8008;
-	data |= 0x6000;
+	data &= ~0x6000;
+	data |= 0x8008;
 	r8168_mac_ocp_write(tp, 0xe052, data);
 
 	data = r8168_mac_ocp_read(tp, 0xe0d6);
-	data &= 0x01ff;
+	data &= ~0x01ff;
 	data |= 0x017f;
 	r8168_mac_ocp_write(tp, 0xe0d6, data);
 
 	data = r8168_mac_ocp_read(tp, 0xd420);
-	data &= 0x0fff;
+	data &= ~0x0fff;
 	data |= 0x047f;
 	r8168_mac_ocp_write(tp, 0xd420, data);
 
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 331c596..88656ce 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1130,7 +1130,8 @@
 	if (netif_running(ndev)) {
 		netif_device_detach(ndev);
 		/* Stop PTP Clock driver */
-		ravb_ptp_stop(ndev);
+		if (priv->chip_id == RCAR_GEN2)
+			ravb_ptp_stop(ndev);
 		/* Wait for DMA stopping */
 		error = ravb_stop_dma(ndev);
 		if (error) {
@@ -1161,7 +1162,8 @@
 		ravb_emac_init(ndev);
 
 		/* Initialise PTP Clock driver */
-		ravb_ptp_init(ndev, priv->pdev);
+		if (priv->chip_id == RCAR_GEN2)
+			ravb_ptp_init(ndev, priv->pdev);
 
 		netif_device_attach(ndev);
 	}
@@ -1289,7 +1291,8 @@
 	netif_tx_stop_all_queues(ndev);
 
 	/* Stop PTP Clock driver */
-	ravb_ptp_stop(ndev);
+	if (priv->chip_id == RCAR_GEN2)
+		ravb_ptp_stop(ndev);
 
 	/* Wait for DMA stopping */
 	ravb_stop_dma(ndev);
@@ -1302,7 +1305,8 @@
 	ravb_emac_init(ndev);
 
 	/* Initialise PTP Clock driver */
-	ravb_ptp_init(ndev, priv->pdev);
+	if (priv->chip_id == RCAR_GEN2)
+		ravb_ptp_init(ndev, priv->pdev);
 
 	netif_tx_start_all_queues(ndev);
 }
@@ -1798,10 +1802,6 @@
 			    CCC_GAC | CCC_CSEL_HPB);
 	}
 
-	/* Set CSEL value */
-	ravb_write(ndev, (ravb_read(ndev, CCC) & ~CCC_CSEL) | CCC_CSEL_HPB,
-		   CCC);
-
 	/* Set GTI value */
 	error = ravb_set_gti(ndev);
 	if (error)
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 0e2fc1a..db7db8a 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2342,8 +2342,8 @@
 	}
 
 	ndev->irq = platform_get_irq(pdev, 0);
-	if (ndev->irq <= 0) {
-		ret = -ENODEV;
+	if (ndev->irq < 0) {
+		ret = ndev->irq;
 		goto out_release_io;
 	}
 	/*
diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c
index 70814b7..fc8bbff 100644
--- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c
+++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c
@@ -1880,9 +1880,9 @@
 	}
 	netdev_reset_queue(ndev);
 
+	dwceqos_init_hw(lp);
 	napi_enable(&lp->napi);
 	phy_start(lp->phy_dev);
-	dwceqos_init_hw(lp);
 
 	netif_start_queue(ndev);
 	tasklet_enable(&lp->tx_bdreclaim_tasklet);
diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c
index e9cc61e..c3e85ac 100644
--- a/drivers/net/ethernet/ti/cpsw-phy-sel.c
+++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c
@@ -63,8 +63,12 @@
 		mode = AM33XX_GMII_SEL_MODE_RGMII;
 		break;
 
-	case PHY_INTERFACE_MODE_MII:
 	default:
+		dev_warn(priv->dev,
+			 "Unsupported PHY mode: \"%s\". Defaulting to MII.\n",
+			phy_modes(phy_mode));
+		/* fallthrough */
+	case PHY_INTERFACE_MODE_MII:
 		mode = AM33XX_GMII_SEL_MODE_MII;
 		break;
 	};
@@ -106,8 +110,12 @@
 		mode = AM33XX_GMII_SEL_MODE_RGMII;
 		break;
 
-	case PHY_INTERFACE_MODE_MII:
 	default:
+		dev_warn(priv->dev,
+			 "Unsupported PHY mode: \"%s\". Defaulting to MII.\n",
+			phy_modes(phy_mode));
+		/* fallthrough */
+	case PHY_INTERFACE_MODE_MII:
 		mode = AM33XX_GMII_SEL_MODE_MII;
 		break;
 	};
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 06a0a73..ed0c30f 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -117,21 +117,17 @@
 	*ndesc = le32_to_cpu(desc->next_desc);
 }
 
-static void get_pad_info(u32 *pad0, u32 *pad1, u32 *pad2, struct knav_dma_desc *desc)
+static u32 get_sw_data(int index, struct knav_dma_desc *desc)
 {
-	*pad0 = le32_to_cpu(desc->pad[0]);
-	*pad1 = le32_to_cpu(desc->pad[1]);
-	*pad2 = le32_to_cpu(desc->pad[2]);
+	/* No Endian conversion needed as this data is untouched by hw */
+	return desc->sw_data[index];
 }
 
-static void get_pad_ptr(void **padptr, struct knav_dma_desc *desc)
-{
-	u64 pad64;
-
-	pad64 = le32_to_cpu(desc->pad[0]) +
-		((u64)le32_to_cpu(desc->pad[1]) << 32);
-	*padptr = (void *)(uintptr_t)pad64;
-}
+/* use these macros to get sw data */
+#define GET_SW_DATA0(desc) get_sw_data(0, desc)
+#define GET_SW_DATA1(desc) get_sw_data(1, desc)
+#define GET_SW_DATA2(desc) get_sw_data(2, desc)
+#define GET_SW_DATA3(desc) get_sw_data(3, desc)
 
 static void get_org_pkt_info(dma_addr_t *buff, u32 *buff_len,
 			     struct knav_dma_desc *desc)
@@ -163,13 +159,18 @@
 	desc->packet_info = cpu_to_le32(pkt_info);
 }
 
-static void set_pad_info(u32 pad0, u32 pad1, u32 pad2, struct knav_dma_desc *desc)
+static void set_sw_data(int index, u32 data, struct knav_dma_desc *desc)
 {
-	desc->pad[0] = cpu_to_le32(pad0);
-	desc->pad[1] = cpu_to_le32(pad1);
-	desc->pad[2] = cpu_to_le32(pad1);
+	/* No Endian conversion needed as this data is untouched by hw */
+	desc->sw_data[index] = data;
 }
 
+/* use these macros to set sw data */
+#define SET_SW_DATA0(data, desc) set_sw_data(0, data, desc)
+#define SET_SW_DATA1(data, desc) set_sw_data(1, data, desc)
+#define SET_SW_DATA2(data, desc) set_sw_data(2, data, desc)
+#define SET_SW_DATA3(data, desc) set_sw_data(3, data, desc)
+
 static void set_org_pkt_info(dma_addr_t buff, u32 buff_len,
 			     struct knav_dma_desc *desc)
 {
@@ -581,7 +582,6 @@
 	dma_addr_t dma_desc, dma_buf;
 	unsigned int buf_len, dma_sz = sizeof(*ndesc);
 	void *buf_ptr;
-	u32 pad[2];
 	u32 tmp;
 
 	get_words(&dma_desc, 1, &desc->next_desc);
@@ -593,14 +593,20 @@
 			break;
 		}
 		get_pkt_info(&dma_buf, &tmp, &dma_desc, ndesc);
-		get_pad_ptr(&buf_ptr, ndesc);
+		/* warning!!!! We are retrieving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		buf_ptr = (void *)GET_SW_DATA0(ndesc);
+		buf_len = (int)GET_SW_DATA1(desc);
 		dma_unmap_page(netcp->dev, dma_buf, PAGE_SIZE, DMA_FROM_DEVICE);
 		__free_page(buf_ptr);
 		knav_pool_desc_put(netcp->rx_pool, desc);
 	}
-
-	get_pad_info(&pad[0], &pad[1], &buf_len, desc);
-	buf_ptr = (void *)(uintptr_t)(pad[0] + ((u64)pad[1] << 32));
+	/* warning!!!! We are retrieving the virtual ptr in the sw_data
+	 * field as a 32bit value. Will not work on 64bit machines
+	 */
+	buf_ptr = (void *)GET_SW_DATA0(desc);
+	buf_len = (int)GET_SW_DATA1(desc);
 
 	if (buf_ptr)
 		netcp_frag_free(buf_len <= PAGE_SIZE, buf_ptr);
@@ -639,7 +645,6 @@
 	dma_addr_t dma_desc, dma_buff;
 	struct netcp_packet p_info;
 	struct sk_buff *skb;
-	u32 pad[2];
 	void *org_buf_ptr;
 
 	dma_desc = knav_queue_pop(netcp->rx_queue, &dma_sz);
@@ -653,8 +658,11 @@
 	}
 
 	get_pkt_info(&dma_buff, &buf_len, &dma_desc, desc);
-	get_pad_info(&pad[0], &pad[1], &org_buf_len, desc);
-	org_buf_ptr = (void *)(uintptr_t)(pad[0] + ((u64)pad[1] << 32));
+	/* warning!!!! We are retrieving the virtual ptr in the sw_data
+	 * field as a 32bit value. Will not work on 64bit machines
+	 */
+	org_buf_ptr = (void *)GET_SW_DATA0(desc);
+	org_buf_len = (int)GET_SW_DATA1(desc);
 
 	if (unlikely(!org_buf_ptr)) {
 		dev_err(netcp->ndev_dev, "NULL bufptr in desc\n");
@@ -679,7 +687,6 @@
 	/* Fill in the page fragment list */
 	while (dma_desc) {
 		struct page *page;
-		void *ptr;
 
 		ndesc = knav_pool_desc_unmap(netcp->rx_pool, dma_desc, dma_sz);
 		if (unlikely(!ndesc)) {
@@ -688,8 +695,10 @@
 		}
 
 		get_pkt_info(&dma_buff, &buf_len, &dma_desc, ndesc);
-		get_pad_ptr(&ptr, ndesc);
-		page = ptr;
+		/* warning!!!! We are retrieving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		page = (struct page *)GET_SW_DATA0(desc);
 
 		if (likely(dma_buff && buf_len && page)) {
 			dma_unmap_page(netcp->dev, dma_buff, PAGE_SIZE,
@@ -777,7 +786,10 @@
 		}
 
 		get_org_pkt_info(&dma, &buf_len, desc);
-		get_pad_ptr(&buf_ptr, desc);
+		/* warning!!!! We are retrieving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		buf_ptr = (void *)GET_SW_DATA0(desc);
 
 		if (unlikely(!dma)) {
 			dev_err(netcp->ndev_dev, "NULL orig_buff in desc\n");
@@ -829,7 +841,7 @@
 	struct page *page;
 	dma_addr_t dma;
 	void *bufptr;
-	u32 pad[3];
+	u32 sw_data[2];
 
 	/* Allocate descriptor */
 	hwdesc = knav_pool_desc_get(netcp->rx_pool);
@@ -846,7 +858,7 @@
 				SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
 		bufptr = netdev_alloc_frag(primary_buf_len);
-		pad[2] = primary_buf_len;
+		sw_data[1] = primary_buf_len;
 
 		if (unlikely(!bufptr)) {
 			dev_warn_ratelimited(netcp->ndev_dev,
@@ -858,9 +870,10 @@
 		if (unlikely(dma_mapping_error(netcp->dev, dma)))
 			goto fail;
 
-		pad[0] = lower_32_bits((uintptr_t)bufptr);
-		pad[1] = upper_32_bits((uintptr_t)bufptr);
-
+		/* warning!!!! We are saving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		sw_data[0] = (u32)bufptr;
 	} else {
 		/* Allocate a secondary receive queue entry */
 		page = alloc_page(GFP_ATOMIC | GFP_DMA | __GFP_COLD);
@@ -870,9 +883,11 @@
 		}
 		buf_len = PAGE_SIZE;
 		dma = dma_map_page(netcp->dev, page, 0, buf_len, DMA_TO_DEVICE);
-		pad[0] = lower_32_bits(dma);
-		pad[1] = upper_32_bits(dma);
-		pad[2] = 0;
+		/* warning!!!! We are saving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		sw_data[0] = (u32)page;
+		sw_data[1] = 0;
 	}
 
 	desc_info =  KNAV_DMA_DESC_PS_INFO_IN_DESC;
@@ -882,7 +897,8 @@
 	pkt_info |= (netcp->rx_queue_id & KNAV_DMA_DESC_RETQ_MASK) <<
 		    KNAV_DMA_DESC_RETQ_SHIFT;
 	set_org_pkt_info(dma, buf_len, hwdesc);
-	set_pad_info(pad[0], pad[1], pad[2], hwdesc);
+	SET_SW_DATA0(sw_data[0], hwdesc);
+	SET_SW_DATA1(sw_data[1], hwdesc);
 	set_desc_info(desc_info, pkt_info, hwdesc);
 
 	/* Push to FDQs */
@@ -971,7 +987,6 @@
 					  unsigned int budget)
 {
 	struct knav_dma_desc *desc;
-	void *ptr;
 	struct sk_buff *skb;
 	unsigned int dma_sz;
 	dma_addr_t dma;
@@ -988,8 +1003,10 @@
 			continue;
 		}
 
-		get_pad_ptr(&ptr, desc);
-		skb = ptr;
+		/* warning!!!! We are retrieving the virtual ptr in the sw_data
+		 * field as a 32bit value. Will not work on 64bit machines
+		 */
+		skb = (struct sk_buff *)GET_SW_DATA0(desc);
 		netcp_free_tx_desc_chain(netcp, desc, dma_sz);
 		if (!skb) {
 			dev_err(netcp->ndev_dev, "No skb in Tx desc\n");
@@ -1194,10 +1211,10 @@
 	}
 
 	set_words(&tmp, 1, &desc->packet_info);
-	tmp = lower_32_bits((uintptr_t)&skb);
-	set_words(&tmp, 1, &desc->pad[0]);
-	tmp = upper_32_bits((uintptr_t)&skb);
-	set_words(&tmp, 1, &desc->pad[1]);
+	/* warning!!!! We are saving the virtual ptr in the sw_data
+	 * field as a 32bit value. Will not work on 64bit machines
+	 */
+	SET_SW_DATA0((u32)skb, desc);
 
 	if (tx_pipe->flags & SWITCH_TO_PORT_IN_TAGINFO) {
 		tmp = tx_pipe->switch_to_port;
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 8fa8388..bc5da35 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -1090,6 +1090,34 @@
 	return geneve_xmit_skb(skb, dev, info);
 }
 
+static int __geneve_change_mtu(struct net_device *dev, int new_mtu, bool strict)
+{
+	/* The max_mtu calculation does not take account of GENEVE
+	 * options, to avoid excluding potentially valid
+	 * configurations.
+	 */
+	int max_mtu = IP_MAX_MTU - GENEVE_BASE_HLEN - sizeof(struct iphdr)
+		- dev->hard_header_len;
+
+	if (new_mtu < 68)
+		return -EINVAL;
+
+	if (new_mtu > max_mtu) {
+		if (strict)
+			return -EINVAL;
+
+		new_mtu = max_mtu;
+	}
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static int geneve_change_mtu(struct net_device *dev, int new_mtu)
+{
+	return __geneve_change_mtu(dev, new_mtu, true);
+}
+
 static int geneve_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ip_tunnel_info *info = skb_tunnel_info(skb);
@@ -1134,7 +1162,7 @@
 	.ndo_stop		= geneve_stop,
 	.ndo_start_xmit		= geneve_xmit,
 	.ndo_get_stats64	= ip_tunnel_get_stats64,
-	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_change_mtu		= geneve_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_fill_metadata_dst	= geneve_fill_metadata_dst,
@@ -1201,6 +1229,7 @@
 	dev->hw_features |= NETIF_F_GSO_SOFTWARE;
 
 	netif_keep_dst(dev);
+	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
 	eth_hw_addr_random(dev);
 }
@@ -1494,12 +1523,23 @@
 		return dev;
 
 	err = geneve_configure(net, dev, &geneve_remote_unspec,
-			       0, 0, 0, htons(dst_port), true, 0);
-	if (err) {
-		free_netdev(dev);
-		return ERR_PTR(err);
-	}
+			       0, 0, 0, htons(dst_port), true,
+			       GENEVE_F_UDP_ZERO_CSUM6_RX);
+	if (err)
+		goto err;
+
+	/* openvswitch users expect packet sizes to be unrestricted,
+	 * so set the largest MTU we can.
+	 */
+	err = __geneve_change_mtu(dev, IP_MAX_MTU, false);
+	if (err)
+		goto err;
+
 	return dev;
+
+ err:
+	free_netdev(dev);
+	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(geneve_dev_create_fb);
 
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 202e2b1..2b6595e 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1095,6 +1095,9 @@
 	net->ethtool_ops = &ethtool_ops;
 	SET_NETDEV_DEV(net, &dev->device);
 
+	/* We always need headroom for rndis header */
+	net->needed_headroom = RNDIS_AND_PPI_SIZE;
+
 	/* Notify the netvsc driver of the new device */
 	memset(&device_info, 0, sizeof(device_info));
 	device_info.ring_size = ring_size;
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 9b31104..b881a7b1 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -250,10 +250,6 @@
 	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
 
-	/* Workaround only required for 100Mbits/sec capable PHYs */
-	if (phydev->supported & PHY_GBIT_FEATURES)
-		return 0;
-
 	/* set shadow mode 2 */
 	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
 			MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
@@ -270,7 +266,7 @@
 	phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
 
 	/* reset shadow mode 2 */
-	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
 	if (ret < 0)
 		return ret;
 
@@ -307,11 +303,6 @@
 	return 0;
 }
 
-static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
-{
-	return 0;
-}
-
 #define BCM7XXX_28NM_GPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -351,31 +342,7 @@
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
-{
-	.phy_id		= PHY_BCM_OUI_4,
-	.phy_id_mask	= 0xffff0000,
-	.name		= "Broadcom BCM7XXX 40nm",
-	.features	= PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
-}, {
-	.phy_id		= PHY_BCM_OUI_5,
-	.phy_id_mask	= 0xffffff00,
-	.name		= "Broadcom BCM7XXX 65nm",
-	.features	= PHY_BASIC_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_dummy_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
-} };
+};
 
 static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 	{ PHY_ID_BCM7250, 0xfffffff0, },
@@ -386,8 +353,6 @@
 	{ PHY_ID_BCM7439, 0xfffffff0, },
 	{ PHY_ID_BCM7435, 0xfffffff0, },
 	{ PHY_ID_BCM7445, 0xfffffff0, },
-	{ PHY_BCM_OUI_4, 0xffff0000 },
-	{ PHY_BCM_OUI_5, 0xffffff00 },
 	{ }
 };
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index d0168f1..9fb9d80a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -486,6 +486,12 @@
 	if (err < 0)
 		return err;
 
+	return 0;
+}
+
+static int marvell_config_init(struct phy_device *phydev)
+{
+	/* Set registers from marvell,reg-init DT property */
 	return marvell_of_reg_init(phydev);
 }
 
@@ -535,7 +541,7 @@
 
 	mdelay(500);
 
-	return 0;
+	return marvell_config_init(phydev);
 }
 
 static int m88e3016_config_init(struct phy_device *phydev)
@@ -554,7 +560,7 @@
 	if (reg < 0)
 		return reg;
 
-	return 0;
+	return marvell_config_init(phydev);
 }
 
 static int m88e1111_config_init(struct phy_device *phydev)
@@ -1118,6 +1124,7 @@
 		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &marvell_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1189,6 +1196,7 @@
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1121_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1207,6 +1215,7 @@
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1318,6 +1327,7 @@
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bad3f00..e551f3a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1410,7 +1410,7 @@
 
 	features = (SUPPORTED_TP | SUPPORTED_MII
 			| SUPPORTED_AUI | SUPPORTED_FIBRE |
-			SUPPORTED_BNC);
+			SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause);
 
 	/* Do we support autonegotiation? */
 	val = phy_read(phydev, MII_BMSR);
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index f3c6302..4ddae81 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -395,6 +395,8 @@
 
 		if (!__pppoe_xmit(sk_pppox(relay_po), skb))
 			goto abort_put;
+
+		sock_put(sk_pppox(relay_po));
 	} else {
 		if (sock_queue_rcv_skb(sk, skb))
 			goto abort_kfree;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 7f83504..cdde590 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -395,6 +395,10 @@
 	  The protocol specification is incomplete, and is controlled by
 	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
 
+config USB_NET_CDC_SUBSET_ENABLE
+	tristate
+	depends on USB_NET_CDC_SUBSET
+
 config USB_NET_CDC_SUBSET
 	tristate "Simple USB Network Links (CDC Ethernet subset)"
 	depends on USB_USBNET
@@ -413,6 +417,7 @@
 config USB_ALI_M5632
 	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design, which supports USB 2.0 high speed.
@@ -420,6 +425,7 @@
 config USB_AN2720
 	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design.  Note that AnchorChips is now a
@@ -428,6 +434,7 @@
 config USB_BELKIN
 	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	default y
 	help
 	  Choose this option if you're using a host-to-host cable
@@ -437,6 +444,7 @@
 config USB_ARMLINUX
 	bool "Embedded ARM Linux links (iPaq, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	default y
 	help
 	  Choose this option to support the "usb-eth" networking driver
@@ -454,6 +462,7 @@
 config USB_EPSON2888
 	bool "Epson 2888 based firmware (DEVELOPMENT)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
@@ -461,6 +470,7 @@
 config USB_KC2190
 	bool "KT Technology KC2190 based cables (InstaNet)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  with one of these chips.
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b5f0406..37fb46ae 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -23,7 +23,7 @@
 obj-$(CONFIG_USB_NET_NET1080)	+= net1080.o
 obj-$(CONFIG_USB_NET_PLUSB)	+= plusb.o
 obj-$(CONFIG_USB_NET_RNDIS_HOST)	+= rndis_host.o
-obj-$(CONFIG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
+obj-$(CONFIG_USB_NET_CDC_SUBSET_ENABLE)	+= cdc_subset.o
 obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 23e9880..570deef 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -637,6 +637,7 @@
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
+	{QMI_FIXED_INTF(0x05c6, 0x6001, 3)},	/* 4G LTE usb-modem U901 */
 	{QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
 	{QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
 	{QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
diff --git a/drivers/net/vmxnet3/vmxnet3_defs.h b/drivers/net/vmxnet3/vmxnet3_defs.h
index 221a530..72ba8ae 100644
--- a/drivers/net/vmxnet3/vmxnet3_defs.h
+++ b/drivers/net/vmxnet3/vmxnet3_defs.h
@@ -377,7 +377,7 @@
 #define VMXNET3_TX_RING_MAX_SIZE   4096
 #define VMXNET3_TC_RING_MAX_SIZE   4096
 #define VMXNET3_RX_RING_MAX_SIZE   4096
-#define VMXNET3_RX_RING2_MAX_SIZE  2048
+#define VMXNET3_RX_RING2_MAX_SIZE  4096
 #define VMXNET3_RC_RING_MAX_SIZE   8192
 
 /* a list of reasons for queue stop */
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index bdb8a6c..729c344 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -69,10 +69,10 @@
 /*
  * Version numbers
  */
-#define VMXNET3_DRIVER_VERSION_STRING   "1.4.5.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING   "1.4.6.0-k"
 
 /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM      0x01040500
+#define VMXNET3_DRIVER_VERSION_NUM      0x01040600
 
 #if defined(CONFIG_PCI_MSI)
 	/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 2ddc642..909f793 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2123,9 +2123,11 @@
 #endif
 	}
 
-	if (vxlan->flags & VXLAN_F_COLLECT_METADATA &&
-	    info && info->mode & IP_TUNNEL_INFO_TX) {
-		vxlan_xmit_one(skb, dev, NULL, false);
+	if (vxlan->flags & VXLAN_F_COLLECT_METADATA) {
+		if (info && info->mode & IP_TUNNEL_INFO_TX)
+			vxlan_xmit_one(skb, dev, NULL, false);
+		else
+			kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -2319,27 +2321,41 @@
 {
 }
 
+static int __vxlan_change_mtu(struct net_device *dev,
+			      struct net_device *lowerdev,
+			      struct vxlan_rdst *dst, int new_mtu, bool strict)
+{
+	int max_mtu = IP_MAX_MTU;
+
+	if (lowerdev)
+		max_mtu = lowerdev->mtu;
+
+	if (dst->remote_ip.sa.sa_family == AF_INET6)
+		max_mtu -= VXLAN6_HEADROOM;
+	else
+		max_mtu -= VXLAN_HEADROOM;
+
+	if (new_mtu < 68)
+		return -EINVAL;
+
+	if (new_mtu > max_mtu) {
+		if (strict)
+			return -EINVAL;
+
+		new_mtu = max_mtu;
+	}
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+
 static int vxlan_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	struct vxlan_rdst *dst = &vxlan->default_dst;
-	struct net_device *lowerdev;
-	int max_mtu;
-
-	lowerdev = __dev_get_by_index(vxlan->net, dst->remote_ifindex);
-	if (lowerdev == NULL)
-		return eth_change_mtu(dev, new_mtu);
-
-	if (dst->remote_ip.sa.sa_family == AF_INET6)
-		max_mtu = lowerdev->mtu - VXLAN6_HEADROOM;
-	else
-		max_mtu = lowerdev->mtu - VXLAN_HEADROOM;
-
-	if (new_mtu < 68 || new_mtu > max_mtu)
-		return -EINVAL;
-
-	dev->mtu = new_mtu;
-	return 0;
+	struct net_device *lowerdev = __dev_get_by_index(vxlan->net,
+							 dst->remote_ifindex);
+	return __vxlan_change_mtu(dev, lowerdev, dst, new_mtu, true);
 }
 
 static int vxlan_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
@@ -2456,6 +2472,7 @@
 	dev->hw_features |= NETIF_F_GSO_SOFTWARE;
 	dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX;
 	netif_keep_dst(dev);
+	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
 
 	INIT_LIST_HEAD(&vxlan->next);
@@ -2698,6 +2715,7 @@
 	int err;
 	bool use_ipv6 = false;
 	__be16 default_port = vxlan->cfg.dst_port;
+	struct net_device *lowerdev = NULL;
 
 	vxlan->net = src_net;
 
@@ -2718,9 +2736,7 @@
 	}
 
 	if (conf->remote_ifindex) {
-		struct net_device *lowerdev
-			 = __dev_get_by_index(src_net, conf->remote_ifindex);
-
+		lowerdev = __dev_get_by_index(src_net, conf->remote_ifindex);
 		dst->remote_ifindex = conf->remote_ifindex;
 
 		if (!lowerdev) {
@@ -2744,6 +2760,12 @@
 		needed_headroom = lowerdev->hard_header_len;
 	}
 
+	if (conf->mtu) {
+		err = __vxlan_change_mtu(dev, lowerdev, dst, conf->mtu, false);
+		if (err)
+			return err;
+	}
+
 	if (use_ipv6 || conf->flags & VXLAN_F_COLLECT_METADATA)
 		needed_headroom += VXLAN6_HEADROOM;
 	else
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 7a72407..6292259 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1626,7 +1626,7 @@
 		if (state & Xpr) {
 			void __iomem *scc_addr;
 			unsigned long ring;
-			int i;
+			unsigned int i;
 
 			/*
 			 * - the busy condition happens (sometimes);
diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 11932d5..16c4f38 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -53,7 +53,6 @@
 
 config IWLDVM
 	tristate "Intel Wireless WiFi DVM Firmware support"
-	depends on m
 	help
 	  This is the driver that supports the DVM firmware. The list
 	  of the devices that use this firmware is available here:
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
index c84a029..bce9b3420 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
@@ -7,6 +7,7 @@
  *
  * Copyright(c) 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -70,12 +71,15 @@
 
 /* Highest firmware API version supported */
 #define IWL8000_UCODE_API_MAX	20
+#define IWL8265_UCODE_API_MAX	20
 
 /* Oldest version we won't warn about */
 #define IWL8000_UCODE_API_OK	13
+#define IWL8265_UCODE_API_OK	20
 
 /* Lowest firmware API version supported */
 #define IWL8000_UCODE_API_MIN	13
+#define IWL8265_UCODE_API_MIN	20
 
 /* NVM versions */
 #define IWL8000_NVM_VERSION		0x0a1d
@@ -93,6 +97,10 @@
 #define IWL8000_MODULE_FIRMWARE(api) \
 	IWL8000_FW_PRE "-" __stringify(api) ".ucode"
 
+#define IWL8265_FW_PRE "iwlwifi-8265-"
+#define IWL8265_MODULE_FIRMWARE(api) \
+	IWL8265_FW_PRE __stringify(api) ".ucode"
+
 #define NVM_HW_SECTION_NUM_FAMILY_8000		10
 #define DEFAULT_NVM_FILE_FAMILY_8000B		"nvmData-8000B"
 #define DEFAULT_NVM_FILE_FAMILY_8000C		"nvmData-8000C"
@@ -144,10 +152,7 @@
 	.support_tx_backoff = true,
 };
 
-#define IWL_DEVICE_8000							\
-	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
-	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
-	.ucode_api_min = IWL8000_UCODE_API_MIN,				\
+#define IWL_DEVICE_8000_COMMON						\
 	.device_family = IWL_DEVICE_FAMILY_8000,			\
 	.max_inst_size = IWL60_RTC_INST_SIZE,				\
 	.max_data_size = IWL60_RTC_DATA_SIZE,				\
@@ -167,10 +172,28 @@
 	.thermal_params = &iwl8000_tt_params,				\
 	.apmg_not_supported = true
 
+#define IWL_DEVICE_8000							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
+	.ucode_api_min = IWL8000_UCODE_API_MIN				\
+
+#define IWL_DEVICE_8260							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
+	.ucode_api_min = IWL8000_UCODE_API_MIN				\
+
+#define IWL_DEVICE_8265							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8265_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8265_UCODE_API_OK,				\
+	.ucode_api_min = IWL8265_UCODE_API_MIN				\
+
 const struct iwl_cfg iwl8260_2n_cfg = {
 	.name = "Intel(R) Dual Band Wireless N 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -179,7 +202,7 @@
 const struct iwl_cfg iwl8260_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -188,8 +211,8 @@
 
 const struct iwl_cfg iwl8265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8265",
-	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	.fw_name_pre = IWL8265_FW_PRE,
+	IWL_DEVICE_8265,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -209,7 +232,7 @@
 const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
 	.name = "Intel(R) Dual Band Wireless-AC 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -236,3 +259,4 @@
 };
 
 MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL8265_MODULE_FIRMWARE(IWL8265_UCODE_API_OK));
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 7acb490..ab4c2a0 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -243,8 +243,10 @@
 	if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) {
 		char rev_step = 'A' + CSR_HW_REV_STEP(drv->trans->hw_rev);
 
-		snprintf(drv->firmware_name, sizeof(drv->firmware_name),
-			 "%s%c-%s.ucode", name_pre, rev_step, tag);
+		if (rev_step != 'A')
+			snprintf(drv->firmware_name,
+				 sizeof(drv->firmware_name), "%s%c-%s.ucode",
+				 name_pre, rev_step, tag);
 	}
 
 	IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n",
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 1e1ab9d..aa6d807 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1301,6 +1301,10 @@
 		return -EBUSY;
 	}
 
+	/* we don't support "match all" in the firmware */
+	if (!req->n_match_sets)
+		return -EOPNOTSUPP;
+
 	ret = iwl_mvm_check_running_scans(mvm, type);
 	if (ret)
 		return ret;
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index 2f95916..542bbc5 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -507,6 +507,15 @@
 	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
 }
 
+static inline void iwl_enable_fw_load_int(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	IWL_DEBUG_ISR(trans, "Enabling FW load interrupt\n");
+	trans_pcie->inta_mask = CSR_INT_BIT_FH_TX;
+	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
+}
+
 static inline void iwl_enable_rfkill_int(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 51314e56..07973ef 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1614,9 +1614,11 @@
 			 inta & ~trans_pcie->inta_mask);
 	}
 
-	/* Re-enable all interrupts */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &trans->status))
+	/* we are loading the firmware, enable FH_TX interrupt only */
+	if (handled & CSR_INT_BIT_FH_TX)
+		iwl_enable_fw_load_int(trans);
+	/* only Re-enable all interrupt if disabled by irq */
+	else if (test_bit(STATUS_INT_ENABLED, &trans->status))
 		iwl_enable_interrupts(trans);
 	/* Re-enable RF_KILL if it occurred */
 	else if (handled & CSR_INT_BIT_RF_KILL)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index b796952..58591ca 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1022,82 +1022,6 @@
 					       &first_ucode_section);
 }
 
-static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
-				   const struct fw_img *fw, bool run_in_rfkill)
-{
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	bool hw_rfkill;
-	int ret;
-
-	mutex_lock(&trans_pcie->mutex);
-
-	/* Someone called stop_device, don't try to start_fw */
-	if (trans_pcie->is_down) {
-		IWL_WARN(trans,
-			 "Can't start_fw since the HW hasn't been started\n");
-		ret = EIO;
-		goto out;
-	}
-
-	/* This may fail if AMT took ownership of the device */
-	if (iwl_pcie_prepare_card_hw(trans)) {
-		IWL_WARN(trans, "Exit HW not ready\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	iwl_enable_rfkill_int(trans);
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	hw_rfkill = iwl_is_rfkill_set(trans);
-	if (hw_rfkill)
-		set_bit(STATUS_RFKILL, &trans->status);
-	else
-		clear_bit(STATUS_RFKILL, &trans->status);
-	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
-	if (hw_rfkill && !run_in_rfkill) {
-		ret = -ERFKILL;
-		goto out;
-	}
-
-	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
-
-	ret = iwl_pcie_nic_init(trans);
-	if (ret) {
-		IWL_ERR(trans, "Unable to init nic\n");
-		goto out;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(trans);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-	/* Load the given image to the HW */
-	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
-		ret = iwl_pcie_load_given_ucode_8000(trans, fw);
-	else
-		ret = iwl_pcie_load_given_ucode(trans, fw);
-
-out:
-	mutex_unlock(&trans_pcie->mutex);
-	return ret;
-}
-
-static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
-{
-	iwl_pcie_reset_ict(trans);
-	iwl_pcie_tx_start(trans, scd_addr);
-}
-
 static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -1128,7 +1052,8 @@
 	 * already dead.
 	 */
 	if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
-		IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n");
+		IWL_DEBUG_INFO(trans,
+			       "DEVICE_ENABLED bit was set and is now cleared\n");
 		iwl_pcie_tx_stop(trans);
 		iwl_pcie_rx_stop(trans);
 
@@ -1162,7 +1087,6 @@
 	iwl_disable_interrupts(trans);
 	spin_unlock(&trans_pcie->irq_lock);
 
-
 	/* clear all status bits */
 	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 	clear_bit(STATUS_INT_ENABLED, &trans->status);
@@ -1195,10 +1119,116 @@
 	if (hw_rfkill != was_hw_rfkill)
 		iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 
-	/* re-take ownership to prevent other users from stealing the deivce */
+	/* re-take ownership to prevent other users from stealing the device */
 	iwl_pcie_prepare_card_hw(trans);
 }
 
+static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
+				   const struct fw_img *fw, bool run_in_rfkill)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	bool hw_rfkill;
+	int ret;
+
+	/* This may fail if AMT took ownership of the device */
+	if (iwl_pcie_prepare_card_hw(trans)) {
+		IWL_WARN(trans, "Exit HW not ready\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	iwl_enable_rfkill_int(trans);
+
+	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+	/*
+	 * We enabled the RF-Kill interrupt and the handler may very
+	 * well be running. Disable the interrupts to make sure no other
+	 * interrupt can be fired.
+	 */
+	iwl_disable_interrupts(trans);
+
+	/* Make sure it finished running */
+	synchronize_irq(trans_pcie->pci_dev->irq);
+
+	mutex_lock(&trans_pcie->mutex);
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	hw_rfkill = iwl_is_rfkill_set(trans);
+	if (hw_rfkill)
+		set_bit(STATUS_RFKILL, &trans->status);
+	else
+		clear_bit(STATUS_RFKILL, &trans->status);
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+	if (hw_rfkill && !run_in_rfkill) {
+		ret = -ERFKILL;
+		goto out;
+	}
+
+	/* Someone called stop_device, don't try to start_fw */
+	if (trans_pcie->is_down) {
+		IWL_WARN(trans,
+			 "Can't start_fw since the HW hasn't been started\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+	ret = iwl_pcie_nic_init(trans);
+	if (ret) {
+		IWL_ERR(trans, "Unable to init nic\n");
+		goto out;
+	}
+
+	/*
+	 * Now, we load the firmware and don't want to be interrupted, even
+	 * by the RF-Kill interrupt (hence mask all the interrupt besides the
+	 * FH_TX interrupt which is needed to load the firmware). If the
+	 * RF-Kill switch is toggled, we will find out after having loaded
+	 * the firmware and return the proper value to the caller.
+	 */
+	iwl_enable_fw_load_int(trans);
+
+	/* really make sure rfkill handshake bits are cleared */
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	/* Load the given image to the HW */
+	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+		ret = iwl_pcie_load_given_ucode_8000(trans, fw);
+	else
+		ret = iwl_pcie_load_given_ucode(trans, fw);
+	iwl_enable_interrupts(trans);
+
+	/* re-check RF-Kill state since we may have missed the interrupt */
+	hw_rfkill = iwl_is_rfkill_set(trans);
+	if (hw_rfkill)
+		set_bit(STATUS_RFKILL, &trans->status);
+	else
+		clear_bit(STATUS_RFKILL, &trans->status);
+
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+	if (hw_rfkill && !run_in_rfkill)
+		ret = -ERFKILL;
+
+out:
+	mutex_unlock(&trans_pcie->mutex);
+	return ret;
+}
+
+static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
+{
+	iwl_pcie_reset_ict(trans);
+	iwl_pcie_tx_start(trans, scd_addr);
+}
+
 static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rc.c b/drivers/net/wireless/realtek/rtlwifi/rc.c
index 74c14ce..28f7010 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rc.c
@@ -138,6 +138,11 @@
 		    ((wireless_mode == WIRELESS_MODE_N_5G) ||
 		     (wireless_mode == WIRELESS_MODE_N_24G)))
 			rate->flags |= IEEE80211_TX_RC_MCS;
+		if (sta && sta->vht_cap.vht_supported &&
+		    (wireless_mode == WIRELESS_MODE_AC_5G ||
+		     wireless_mode == WIRELESS_MODE_AC_24G ||
+		     wireless_mode == WIRELESS_MODE_AC_ONLY))
+			rate->flags |= IEEE80211_TX_RC_VHT_MCS;
 	}
 }
 
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
index 9ac118e..564ca75 100644
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -175,14 +175,14 @@
 	if (ret < 0)
 		goto out;
 
+	/* We don't need the size of the last partition, as it is
+	 * automatically calculated based on the total memory size and
+	 * the sizes of the previous partitions.
+	 */
 	ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
 	if (ret < 0)
 		goto out;
 
-	ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size);
-	if (ret < 0)
-		goto out;
-
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 6c257b54..10cf374 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -36,8 +36,8 @@
 #define HW_PART1_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 12)
 #define HW_PART2_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 16)
 #define HW_PART2_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 20)
-#define HW_PART3_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 24)
-#define HW_PART3_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 28)
+#define HW_PART3_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 24)
+
 #define HW_ACCESS_REGISTER_SIZE         4
 
 #define HW_ACCESS_PRAM_MAX_RANGE	0x3c000