arch/arm/mach-imx/mach-imx6q.c - SHIFTPHONES/mainline/linux - Gitiles

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */

 #include <linux/clk.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/pci.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

 #include "common.h"
 #include "cpuidle.h"
 #include "hardware.h"

 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
 			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);

 		/* max rx/tx clock delay, min rx/tx control delay */
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
 			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
 			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
 	}

 	return 0;
 }

 static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
 {
 	phy_write(dev, 0x0d, device);
 	phy_write(dev, 0x0e, reg);
 	phy_write(dev, 0x0d, (1 << 14) | device);
 	phy_write(dev, 0x0e, val);
 }

 static int ksz9031rn_phy_fixup(struct phy_device *dev)
 {
 	/*
 	 * min rx data delay, max rx/tx clock delay,
 	 * min rx/tx control delay
 	 */
 	mmd_write_reg(dev, 2, 4, 0);
 	mmd_write_reg(dev, 2, 5, 0);
 	mmd_write_reg(dev, 2, 8, 0x003ff);

 	return 0;
 }

 /*
  * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
  * as they are used for slots1-7 PERST#
  */
 static void ventana_pciesw_early_fixup(struct pci_dev *dev)
 {
 	u32 dw;

 	if (!of_machine_is_compatible("gw,ventana"))
 		return;

 	if (dev->devfn != 0)
 		return;

 	pci_read_config_dword(dev, 0x62c, &dw);
 	dw |= 0xaaa8; // GPIO1-7 outputs
 	pci_write_config_dword(dev, 0x62c, dw);

 	pci_read_config_dword(dev, 0x644, &dw);
 	dw |= 0xfe;   // GPIO1-7 output high
 	pci_write_config_dword(dev, 0x644, dw);

 	msleep(100);
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);

 static int ar8031_phy_fixup(struct phy_device *dev)
 {
 	u16 val;

 	/* To enable AR8031 output a 125MHz clk from CLK_25M */
 	phy_write(dev, 0xd, 0x7);
 	phy_write(dev, 0xe, 0x8016);
 	phy_write(dev, 0xd, 0x4007);

 	val = phy_read(dev, 0xe);
 	val &= 0xffe3;
 	val |= 0x18;
 	phy_write(dev, 0xe, val);

 	/* introduce tx clock delay */
 	phy_write(dev, 0x1d, 0x5);
 	val = phy_read(dev, 0x1e);
 	val |= 0x0100;
 	phy_write(dev, 0x1e, val);

 	return 0;
 }

 #define PHY_ID_AR8031	0x004dd074

 static int ar8035_phy_fixup(struct phy_device *dev)
 {
 	u16 val;

 	/* Ar803x phy SmartEEE feature cause link status generates glitch,
 	 * which cause ethernet link down/up issue, so disable SmartEEE
 	 */
 	phy_write(dev, 0xd, 0x3);
 	phy_write(dev, 0xe, 0x805d);
 	phy_write(dev, 0xd, 0x4003);

 	val = phy_read(dev, 0xe);
 	phy_write(dev, 0xe, val & ~(1 << 8));

 	/*
 	 * Enable 125MHz clock from CLK_25M on the AR8031.  This
 	 * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
 	 * Also, introduce a tx clock delay.
 	 *
 	 * This is the same as is the AR8031 fixup.
 	 */
 	ar8031_phy_fixup(dev);

 	/*check phy power*/
 	val = phy_read(dev, 0x0);
 	if (val & BMCR_PDOWN)
 		phy_write(dev, 0x0, val & ~BMCR_PDOWN);

 	return 0;
 }

 #define PHY_ID_AR8035 0x004dd072

 static void __init imx6q_enet_phy_init(void)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
 				ksz9031rn_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
 				ar8031_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
 				ar8035_phy_fixup);
 	}
 }

 static void __init imx6q_1588_init(void)
 {
 	struct device_node *np;
 	struct clk *ptp_clk;
 	struct clk *enet_ref;
 	struct regmap *gpr;
 	u32 clksel;

 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
 	if (!np) {
 		pr_warn("%s: failed to find fec node\n", __func__);
 		return;
 	}

 	ptp_clk = of_clk_get(np, 2);
 	if (IS_ERR(ptp_clk)) {
 		pr_warn("%s: failed to get ptp clock\n", __func__);
 		goto put_node;
 	}

 	enet_ref = clk_get_sys(NULL, "enet_ref");
 	if (IS_ERR(enet_ref)) {
 		pr_warn("%s: failed to get enet clock\n", __func__);
 		goto put_ptp_clk;
 	}

 	/*
 	 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to
 	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
 	 * (external OSC), and we need to clear the bit.
 	 */
 	clksel = clk_is_match(ptp_clk, enet_ref) ?
 				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
 				IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
 				clksel);
 	else
 		pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");

 	clk_put(enet_ref);
 put_ptp_clk:
 	clk_put(ptp_clk);
 put_node:
 	of_node_put(np);
 }

 static void __init imx6q_axi_init(void)
 {
 	struct regmap *gpr;
 	unsigned int mask;

 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr)) {
 		/*
 		 * Enable the cacheable attribute of VPU and IPU
 		 * AXI transactions.
 		 */
 		mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
 			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
 			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
 			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
 			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
 			IMX6Q_GPR4_IPU_RD_CACHE_CTL;
 		regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);

 		/* Increase IPU read QoS priority */
 		regmap_update_bits(gpr, IOMUXC_GPR6,
 				IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
 				IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
 				(0xf << 16) | (0x7 << 20));
 		regmap_update_bits(gpr, IOMUXC_GPR7,
 				IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
 				IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
 				(0xf << 16) | (0x7 << 20));
 	} else {
 		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
 	}
 }

 static void __init imx6q_init_machine(void)
 {
 	if (cpu_is_imx6q() && imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0)
 		/*
 		 * SoCs that identify as i.MX6Q >= rev 2.0 are really i.MX6QP.
 		 * Quirk: i.MX6QP revision = i.MX6Q revision - (1, 0),
 		 * e.g. i.MX6QP rev 1.1 identifies as i.MX6Q rev 2.1.
 		 */
 		imx_print_silicon_rev("i.MX6QP", imx_get_soc_revision() - 0x10);
 	else
 		imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
 				imx_get_soc_revision());

 	imx6q_enet_phy_init();

 	of_platform_default_populate(NULL, NULL, NULL);

 	imx_anatop_init();
 	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();
 	imx6q_axi_init();
 }

 static void __init imx6q_init_late(void)
 {
 	/*
 	 * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
 	 * there is no point to run cpuidle on them.
 	 *
 	 * It does work on imx6 Solo/DualLite starting from 1.1
 	 */
 	if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
 	    (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
 		imx6q_cpuidle_init();

 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }

 static void __init imx6q_map_io(void)
 {
 	debug_ll_io_init();
 	imx_scu_map_io();
 }

 static void __init imx6q_init_irq(void)
 {
 	imx_gpc_check_dt();
 	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
 	irqchip_init();
 	imx6_pm_ccm_init("fsl,imx6q-ccm");
 }

 static const char * const imx6q_dt_compat[] __initconst = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
 	"fsl,imx6qp",
 	NULL,
 };

 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.l2c_aux_val 	= 0,
 	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
 MACHINE_END
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Copyright 2011-2013 Freescale Semiconductor, Inc.
	* Copyright 2011 Linaro Ltd.
	*/

	#include <linux/clk.h>
	#include <linux/irqchip.h>
	#include <linux/of_platform.h>
	#include <linux/pci.h>
	#include <linux/phy.h>
	#include <linux/regmap.h>
	#include <linux/micrel_phy.h>
	#include <linux/mfd/syscon.h>
	#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>

	#include "common.h"
	#include "cpuidle.h"
	#include "hardware.h"

	/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
	static int ksz9021rn_phy_fixup(struct phy_device *phydev)
	{
	if (IS_BUILTIN(CONFIG_PHYLIB)) {
	/* min rx data delay */
	phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
	0x8000 \| MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
	phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);

	/* max rx/tx clock delay, min rx/tx control delay */
	phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
	0x8000 \| MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
	phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
	phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
	MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
	}

	return 0;
	}

	static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
	{
	phy_write(dev, 0x0d, device);
	phy_write(dev, 0x0e, reg);
	phy_write(dev, 0x0d, (1 << 14) \| device);
	phy_write(dev, 0x0e, val);
	}

	static int ksz9031rn_phy_fixup(struct phy_device *dev)
	{
	/*
	* min rx data delay, max rx/tx clock delay,
	* min rx/tx control delay
	*/
	mmd_write_reg(dev, 2, 4, 0);
	mmd_write_reg(dev, 2, 5, 0);
	mmd_write_reg(dev, 2, 8, 0x003ff);

	return 0;
	}

	/*
	* fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
	* as they are used for slots1-7 PERST#
	*/
	static void ventana_pciesw_early_fixup(struct pci_dev *dev)
	{
	u32 dw;

	if (!of_machine_is_compatible("gw,ventana"))
	return;

	if (dev->devfn != 0)
	return;

	pci_read_config_dword(dev, 0x62c, &dw);
	dw \|= 0xaaa8; // GPIO1-7 outputs
	pci_write_config_dword(dev, 0x62c, dw);

	pci_read_config_dword(dev, 0x644, &dw);
	dw \|= 0xfe; // GPIO1-7 output high
	pci_write_config_dword(dev, 0x644, dw);

	msleep(100);
	}
	DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
	DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
	DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);

	static int ar8031_phy_fixup(struct phy_device *dev)
	{
	u16 val;

	/* To enable AR8031 output a 125MHz clk from CLK_25M */
	phy_write(dev, 0xd, 0x7);
	phy_write(dev, 0xe, 0x8016);
	phy_write(dev, 0xd, 0x4007);

	val = phy_read(dev, 0xe);
	val &= 0xffe3;
	val \|= 0x18;
	phy_write(dev, 0xe, val);

	/* introduce tx clock delay */
	phy_write(dev, 0x1d, 0x5);
	val = phy_read(dev, 0x1e);
	val \|= 0x0100;
	phy_write(dev, 0x1e, val);

	return 0;
	}

	#define PHY_ID_AR8031 0x004dd074

	static int ar8035_phy_fixup(struct phy_device *dev)
	{
	u16 val;

	/* Ar803x phy SmartEEE feature cause link status generates glitch,
	* which cause ethernet link down/up issue, so disable SmartEEE
	*/
	phy_write(dev, 0xd, 0x3);
	phy_write(dev, 0xe, 0x805d);
	phy_write(dev, 0xd, 0x4003);

	val = phy_read(dev, 0xe);
	phy_write(dev, 0xe, val & ~(1 << 8));

	/*
	* Enable 125MHz clock from CLK_25M on the AR8031. This
	* is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
	* Also, introduce a tx clock delay.
	*
	* This is the same as is the AR8031 fixup.
	*/
	ar8031_phy_fixup(dev);

	/check phy power/
	val = phy_read(dev, 0x0);
	if (val & BMCR_PDOWN)
	phy_write(dev, 0x0, val & ~BMCR_PDOWN);

	return 0;
	}

	#define PHY_ID_AR8035 0x004dd072

	static void __init imx6q_enet_phy_init(void)
	{
	if (IS_BUILTIN(CONFIG_PHYLIB)) {
	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
	ksz9021rn_phy_fixup);
	phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
	ksz9031rn_phy_fixup);
	phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
	ar8031_phy_fixup);
	phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
	ar8035_phy_fixup);
	}
	}

	static void __init imx6q_1588_init(void)
	{
	struct device_node *np;
	struct clk *ptp_clk;
	struct clk *enet_ref;
	struct regmap *gpr;
	u32 clksel;

	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
	if (!np) {
	pr_warn("%s: failed to find fec node\n", __func__);
	return;
	}

	ptp_clk = of_clk_get(np, 2);
	if (IS_ERR(ptp_clk)) {
	pr_warn("%s: failed to get ptp clock\n", __func__);
	goto put_node;
	}

	enet_ref = clk_get_sys(NULL, "enet_ref");
	if (IS_ERR(enet_ref)) {
	pr_warn("%s: failed to get enet clock\n", __func__);
	goto put_ptp_clk;
	}

	/*
	* If enet_ref from ANATOP/CCM is the PTP clock source, we need to
	* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
	* (external OSC), and we need to clear the bit.
	*/
	clksel = clk_is_match(ptp_clk, enet_ref) ?
	IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
	IMX6Q_GPR1_ENET_CLK_SEL_PAD;
	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
	if (!IS_ERR(gpr))
	regmap_update_bits(gpr, IOMUXC_GPR1,
	IMX6Q_GPR1_ENET_CLK_SEL_MASK,
	clksel);
	else
	pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");

	clk_put(enet_ref);
	put_ptp_clk:
	clk_put(ptp_clk);
	put_node:
	of_node_put(np);
	}

	static void __init imx6q_axi_init(void)
	{
	struct regmap *gpr;
	unsigned int mask;

	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
	if (!IS_ERR(gpr)) {
	/*
	* Enable the cacheable attribute of VPU and IPU
	* AXI transactions.
	*/
	mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL \|
	IMX6Q_GPR4_VPU_RD_CACHE_SEL \|
	IMX6Q_GPR4_VPU_P_WR_CACHE_VAL \|
	IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK \|
	IMX6Q_GPR4_IPU_WR_CACHE_CTL \|
	IMX6Q_GPR4_IPU_RD_CACHE_CTL;
	regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);

	/* Increase IPU read QoS priority */
	regmap_update_bits(gpr, IOMUXC_GPR6,
	IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK \|
	IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
	(0xf << 16) \| (0x7 << 20));
	regmap_update_bits(gpr, IOMUXC_GPR7,
	IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK \|
	IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
	(0xf << 16) \| (0x7 << 20));
	} else {
	pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
	}
	}

	static void __init imx6q_init_machine(void)
	{
	if (cpu_is_imx6q() && imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0)
	/*
	* SoCs that identify as i.MX6Q >= rev 2.0 are really i.MX6QP.
	* Quirk: i.MX6QP revision = i.MX6Q revision - (1, 0),
	* e.g. i.MX6QP rev 1.1 identifies as i.MX6Q rev 2.1.
	*/
	imx_print_silicon_rev("i.MX6QP", imx_get_soc_revision() - 0x10);
	else
	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
	imx_get_soc_revision());

	imx6q_enet_phy_init();

	of_platform_default_populate(NULL, NULL, NULL);

	imx_anatop_init();
	cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
	imx6q_1588_init();
	imx6q_axi_init();
	}

	static void __init imx6q_init_late(void)
	{
	/*
	* WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
	* there is no point to run cpuidle on them.
	*
	* It does work on imx6 Solo/DualLite starting from 1.1
	*/
	if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) \|\|
	(cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
	imx6q_cpuidle_init();

	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
	platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
	}

	static void __init imx6q_map_io(void)
	{
	debug_ll_io_init();
	imx_scu_map_io();
	}

	static void __init imx6q_init_irq(void)
	{
	imx_gpc_check_dt();
	imx_init_revision_from_anatop();
	imx_init_l2cache();
	imx_src_init();
	irqchip_init();
	imx6_pm_ccm_init("fsl,imx6q-ccm");
	}

	static const char * const imx6q_dt_compat[] __initconst = {
	"fsl,imx6dl",
	"fsl,imx6q",
	"fsl,imx6qp",
	NULL,
	};

	DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
	.l2c_aux_val = 0,
	.l2c_aux_mask = ~0,
	.smp = smp_ops(imx_smp_ops),
	.map_io = imx6q_map_io,
	.init_irq = imx6q_init_irq,
	.init_machine = imx6q_init_machine,
	.init_late = imx6q_init_late,
	.dt_compat = imx6q_dt_compat,
	MACHINE_END