| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * skl-topology.c - Implements Platform component ALSA controls/widget |
| * handlers. |
| * |
| * Copyright (C) 2014-2015 Intel Corp |
| * Author: Jeeja KP <jeeja.kp@intel.com> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/firmware.h> |
| #include <linux/uuid.h> |
| #include <sound/intel-nhlt.h> |
| #include <sound/soc.h> |
| #include <sound/soc-acpi.h> |
| #include <sound/soc-topology.h> |
| #include <uapi/sound/snd_sst_tokens.h> |
| #include <uapi/sound/skl-tplg-interface.h> |
| #include "skl-sst-dsp.h" |
| #include "skl-sst-ipc.h" |
| #include "skl-topology.h" |
| #include "skl.h" |
| #include "../common/sst-dsp.h" |
| #include "../common/sst-dsp-priv.h" |
| |
| #define SKL_CH_FIXUP_MASK (1 << 0) |
| #define SKL_RATE_FIXUP_MASK (1 << 1) |
| #define SKL_FMT_FIXUP_MASK (1 << 2) |
| #define SKL_IN_DIR_BIT_MASK BIT(0) |
| #define SKL_PIN_COUNT_MASK GENMASK(7, 4) |
| |
| static const int mic_mono_list[] = { |
| 0, 1, 2, 3, |
| }; |
| static const int mic_stereo_list[][SKL_CH_STEREO] = { |
| {0, 1}, {0, 2}, {0, 3}, {1, 2}, {1, 3}, {2, 3}, |
| }; |
| static const int mic_trio_list[][SKL_CH_TRIO] = { |
| {0, 1, 2}, {0, 1, 3}, {0, 2, 3}, {1, 2, 3}, |
| }; |
| static const int mic_quatro_list[][SKL_CH_QUATRO] = { |
| {0, 1, 2, 3}, |
| }; |
| |
| #define CHECK_HW_PARAMS(ch, freq, bps, prm_ch, prm_freq, prm_bps) \ |
| ((ch == prm_ch) && (bps == prm_bps) && (freq == prm_freq)) |
| |
| void skl_tplg_d0i3_get(struct skl_dev *skl, enum d0i3_capability caps) |
| { |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; |
| |
| switch (caps) { |
| case SKL_D0I3_NONE: |
| d0i3->non_d0i3++; |
| break; |
| |
| case SKL_D0I3_STREAMING: |
| d0i3->streaming++; |
| break; |
| |
| case SKL_D0I3_NON_STREAMING: |
| d0i3->non_streaming++; |
| break; |
| } |
| } |
| |
| void skl_tplg_d0i3_put(struct skl_dev *skl, enum d0i3_capability caps) |
| { |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; |
| |
| switch (caps) { |
| case SKL_D0I3_NONE: |
| d0i3->non_d0i3--; |
| break; |
| |
| case SKL_D0I3_STREAMING: |
| d0i3->streaming--; |
| break; |
| |
| case SKL_D0I3_NON_STREAMING: |
| d0i3->non_streaming--; |
| break; |
| } |
| } |
| |
| /* |
| * SKL DSP driver modelling uses only few DAPM widgets so for rest we will |
| * ignore. This helpers checks if the SKL driver handles this widget type |
| */ |
| static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w, |
| struct device *dev) |
| { |
| if (w->dapm->dev != dev) |
| return false; |
| |
| switch (w->id) { |
| case snd_soc_dapm_dai_link: |
| case snd_soc_dapm_dai_in: |
| case snd_soc_dapm_aif_in: |
| case snd_soc_dapm_aif_out: |
| case snd_soc_dapm_dai_out: |
| case snd_soc_dapm_switch: |
| case snd_soc_dapm_output: |
| case snd_soc_dapm_mux: |
| |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static void skl_dump_mconfig(struct skl_dev *skl, struct skl_module_cfg *mcfg) |
| { |
| struct skl_module_iface *iface = &mcfg->module->formats[mcfg->fmt_idx]; |
| |
| dev_dbg(skl->dev, "Dumping config\n"); |
| dev_dbg(skl->dev, "Input Format:\n"); |
| dev_dbg(skl->dev, "channels = %d\n", iface->inputs[0].fmt.channels); |
| dev_dbg(skl->dev, "s_freq = %d\n", iface->inputs[0].fmt.s_freq); |
| dev_dbg(skl->dev, "ch_cfg = %d\n", iface->inputs[0].fmt.ch_cfg); |
| dev_dbg(skl->dev, "valid bit depth = %d\n", |
| iface->inputs[0].fmt.valid_bit_depth); |
| dev_dbg(skl->dev, "Output Format:\n"); |
| dev_dbg(skl->dev, "channels = %d\n", iface->outputs[0].fmt.channels); |
| dev_dbg(skl->dev, "s_freq = %d\n", iface->outputs[0].fmt.s_freq); |
| dev_dbg(skl->dev, "valid bit depth = %d\n", |
| iface->outputs[0].fmt.valid_bit_depth); |
| dev_dbg(skl->dev, "ch_cfg = %d\n", iface->outputs[0].fmt.ch_cfg); |
| } |
| |
| static void skl_tplg_update_chmap(struct skl_module_fmt *fmt, int chs) |
| { |
| int slot_map = 0xFFFFFFFF; |
| int start_slot = 0; |
| int i; |
| |
| for (i = 0; i < chs; i++) { |
| /* |
| * For 2 channels with starting slot as 0, slot map will |
| * look like 0xFFFFFF10. |
| */ |
| slot_map &= (~(0xF << (4 * i)) | (start_slot << (4 * i))); |
| start_slot++; |
| } |
| fmt->ch_map = slot_map; |
| } |
| |
| static void skl_tplg_update_params(struct skl_module_fmt *fmt, |
| struct skl_pipe_params *params, int fixup) |
| { |
| if (fixup & SKL_RATE_FIXUP_MASK) |
| fmt->s_freq = params->s_freq; |
| if (fixup & SKL_CH_FIXUP_MASK) { |
| fmt->channels = params->ch; |
| skl_tplg_update_chmap(fmt, fmt->channels); |
| } |
| if (fixup & SKL_FMT_FIXUP_MASK) { |
| fmt->valid_bit_depth = skl_get_bit_depth(params->s_fmt); |
| |
| /* |
| * 16 bit is 16 bit container whereas 24 bit is in 32 bit |
| * container so update bit depth accordingly |
| */ |
| switch (fmt->valid_bit_depth) { |
| case SKL_DEPTH_16BIT: |
| fmt->bit_depth = fmt->valid_bit_depth; |
| break; |
| |
| default: |
| fmt->bit_depth = SKL_DEPTH_32BIT; |
| break; |
| } |
| } |
| |
| } |
| |
| /* |
| * A pipeline may have modules which impact the pcm parameters, like SRC, |
| * channel converter, format converter. |
| * We need to calculate the output params by applying the 'fixup' |
| * Topology will tell driver which type of fixup is to be applied by |
| * supplying the fixup mask, so based on that we calculate the output |
| * |
| * Now In FE the pcm hw_params is source/target format. Same is applicable |
| * for BE with its hw_params invoked. |
| * here based on FE, BE pipeline and direction we calculate the input and |
| * outfix and then apply that for a module |
| */ |
| static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg, |
| struct skl_pipe_params *params, bool is_fe) |
| { |
| int in_fixup, out_fixup; |
| struct skl_module_fmt *in_fmt, *out_fmt; |
| |
| /* Fixups will be applied to pin 0 only */ |
| in_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].inputs[0].fmt; |
| out_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].outputs[0].fmt; |
| |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| if (is_fe) { |
| in_fixup = m_cfg->params_fixup; |
| out_fixup = (~m_cfg->converter) & |
| m_cfg->params_fixup; |
| } else { |
| out_fixup = m_cfg->params_fixup; |
| in_fixup = (~m_cfg->converter) & |
| m_cfg->params_fixup; |
| } |
| } else { |
| if (is_fe) { |
| out_fixup = m_cfg->params_fixup; |
| in_fixup = (~m_cfg->converter) & |
| m_cfg->params_fixup; |
| } else { |
| in_fixup = m_cfg->params_fixup; |
| out_fixup = (~m_cfg->converter) & |
| m_cfg->params_fixup; |
| } |
| } |
| |
| skl_tplg_update_params(in_fmt, params, in_fixup); |
| skl_tplg_update_params(out_fmt, params, out_fixup); |
| } |
| |
| /* |
| * A module needs input and output buffers, which are dependent upon pcm |
| * params, so once we have calculate params, we need buffer calculation as |
| * well. |
| */ |
| static void skl_tplg_update_buffer_size(struct skl_dev *skl, |
| struct skl_module_cfg *mcfg) |
| { |
| int multiplier = 1; |
| struct skl_module_fmt *in_fmt, *out_fmt; |
| struct skl_module_res *res; |
| |
| /* Since fixups is applied to pin 0 only, ibs, obs needs |
| * change for pin 0 only |
| */ |
| res = &mcfg->module->resources[mcfg->res_idx]; |
| in_fmt = &mcfg->module->formats[mcfg->fmt_idx].inputs[0].fmt; |
| out_fmt = &mcfg->module->formats[mcfg->fmt_idx].outputs[0].fmt; |
| |
| if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) |
| multiplier = 5; |
| |
| res->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * |
| in_fmt->channels * (in_fmt->bit_depth >> 3) * |
| multiplier; |
| |
| res->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * |
| out_fmt->channels * (out_fmt->bit_depth >> 3) * |
| multiplier; |
| } |
| |
| static u8 skl_tplg_be_dev_type(int dev_type) |
| { |
| int ret; |
| |
| switch (dev_type) { |
| case SKL_DEVICE_BT: |
| ret = NHLT_DEVICE_BT; |
| break; |
| |
| case SKL_DEVICE_DMIC: |
| ret = NHLT_DEVICE_DMIC; |
| break; |
| |
| case SKL_DEVICE_I2S: |
| ret = NHLT_DEVICE_I2S; |
| break; |
| |
| default: |
| ret = NHLT_DEVICE_INVALID; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *m_cfg = w->priv; |
| int link_type, dir; |
| u32 ch, s_freq, s_fmt, s_cont; |
| struct nhlt_specific_cfg *cfg; |
| u8 dev_type = skl_tplg_be_dev_type(m_cfg->dev_type); |
| int fmt_idx = m_cfg->fmt_idx; |
| struct skl_module_iface *m_iface = &m_cfg->module->formats[fmt_idx]; |
| |
| /* check if we already have blob */ |
| if (m_cfg->formats_config[SKL_PARAM_INIT].caps_size > 0) |
| return 0; |
| |
| dev_dbg(skl->dev, "Applying default cfg blob\n"); |
| switch (m_cfg->dev_type) { |
| case SKL_DEVICE_DMIC: |
| link_type = NHLT_LINK_DMIC; |
| dir = SNDRV_PCM_STREAM_CAPTURE; |
| s_freq = m_iface->inputs[0].fmt.s_freq; |
| s_fmt = m_iface->inputs[0].fmt.valid_bit_depth; |
| s_cont = m_iface->inputs[0].fmt.bit_depth; |
| ch = m_iface->inputs[0].fmt.channels; |
| break; |
| |
| case SKL_DEVICE_I2S: |
| link_type = NHLT_LINK_SSP; |
| if (m_cfg->hw_conn_type == SKL_CONN_SOURCE) { |
| dir = SNDRV_PCM_STREAM_PLAYBACK; |
| s_freq = m_iface->outputs[0].fmt.s_freq; |
| s_fmt = m_iface->outputs[0].fmt.valid_bit_depth; |
| s_cont = m_iface->outputs[0].fmt.bit_depth; |
| ch = m_iface->outputs[0].fmt.channels; |
| } else { |
| dir = SNDRV_PCM_STREAM_CAPTURE; |
| s_freq = m_iface->inputs[0].fmt.s_freq; |
| s_fmt = m_iface->inputs[0].fmt.valid_bit_depth; |
| s_cont = m_iface->inputs[0].fmt.bit_depth; |
| ch = m_iface->inputs[0].fmt.channels; |
| } |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* update the blob based on virtual bus_id and default params */ |
| cfg = intel_nhlt_get_endpoint_blob(skl->dev, skl->nhlt, m_cfg->vbus_id, |
| link_type, s_fmt, s_cont, ch, |
| s_freq, dir, dev_type); |
| if (cfg) { |
| m_cfg->formats_config[SKL_PARAM_INIT].caps_size = cfg->size; |
| m_cfg->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps; |
| } else { |
| dev_err(skl->dev, "Blob NULL for id %x type %d dirn %d\n", |
| m_cfg->vbus_id, link_type, dir); |
| dev_err(skl->dev, "PCM: ch %d, freq %d, fmt %d/%d\n", |
| ch, s_freq, s_fmt, s_cont); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *m_cfg = w->priv; |
| struct skl_pipe_params *params = m_cfg->pipe->p_params; |
| int p_conn_type = m_cfg->pipe->conn_type; |
| bool is_fe; |
| |
| if (!m_cfg->params_fixup) |
| return; |
| |
| dev_dbg(skl->dev, "Mconfig for widget=%s BEFORE updation\n", |
| w->name); |
| |
| skl_dump_mconfig(skl, m_cfg); |
| |
| if (p_conn_type == SKL_PIPE_CONN_TYPE_FE) |
| is_fe = true; |
| else |
| is_fe = false; |
| |
| skl_tplg_update_params_fixup(m_cfg, params, is_fe); |
| skl_tplg_update_buffer_size(skl, m_cfg); |
| |
| dev_dbg(skl->dev, "Mconfig for widget=%s AFTER updation\n", |
| w->name); |
| |
| skl_dump_mconfig(skl, m_cfg); |
| } |
| |
| /* |
| * some modules can have multiple params set from user control and |
| * need to be set after module is initialized. If set_param flag is |
| * set module params will be done after module is initialised. |
| */ |
| static int skl_tplg_set_module_params(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| int i, ret; |
| struct skl_module_cfg *mconfig = w->priv; |
| const struct snd_kcontrol_new *k; |
| struct soc_bytes_ext *sb; |
| struct skl_algo_data *bc; |
| struct skl_specific_cfg *sp_cfg; |
| |
| if (mconfig->formats_config[SKL_PARAM_SET].caps_size > 0 && |
| mconfig->formats_config[SKL_PARAM_SET].set_params == SKL_PARAM_SET) { |
| sp_cfg = &mconfig->formats_config[SKL_PARAM_SET]; |
| ret = skl_set_module_params(skl, sp_cfg->caps, |
| sp_cfg->caps_size, |
| sp_cfg->param_id, mconfig); |
| if (ret < 0) |
| return ret; |
| } |
| |
| for (i = 0; i < w->num_kcontrols; i++) { |
| k = &w->kcontrol_news[i]; |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { |
| sb = (void *) k->private_value; |
| bc = (struct skl_algo_data *)sb->dobj.private; |
| |
| if (bc->set_params == SKL_PARAM_SET) { |
| ret = skl_set_module_params(skl, |
| (u32 *)bc->params, bc->size, |
| bc->param_id, mconfig); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * some module param can set from user control and this is required as |
| * when module is initailzed. if module param is required in init it is |
| * identifed by set_param flag. if set_param flag is not set, then this |
| * parameter needs to set as part of module init. |
| */ |
| static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w) |
| { |
| const struct snd_kcontrol_new *k; |
| struct soc_bytes_ext *sb; |
| struct skl_algo_data *bc; |
| struct skl_module_cfg *mconfig = w->priv; |
| int i; |
| |
| for (i = 0; i < w->num_kcontrols; i++) { |
| k = &w->kcontrol_news[i]; |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { |
| sb = (struct soc_bytes_ext *)k->private_value; |
| bc = (struct skl_algo_data *)sb->dobj.private; |
| |
| if (bc->set_params != SKL_PARAM_INIT) |
| continue; |
| |
| mconfig->formats_config[SKL_PARAM_INIT].caps = |
| (u32 *)bc->params; |
| mconfig->formats_config[SKL_PARAM_INIT].caps_size = |
| bc->size; |
| |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_module_prepare(struct skl_dev *skl, struct skl_pipe *pipe, |
| struct snd_soc_dapm_widget *w, struct skl_module_cfg *mcfg) |
| { |
| switch (mcfg->dev_type) { |
| case SKL_DEVICE_HDAHOST: |
| return skl_pcm_host_dma_prepare(skl->dev, pipe->p_params); |
| |
| case SKL_DEVICE_HDALINK: |
| return skl_pcm_link_dma_prepare(skl->dev, pipe->p_params); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Inside a pipe instance, we can have various modules. These modules need |
| * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by |
| * skl_init_module() routine, so invoke that for all modules in a pipeline |
| */ |
| static int |
| skl_tplg_init_pipe_modules(struct skl_dev *skl, struct skl_pipe *pipe) |
| { |
| struct skl_pipe_module *w_module; |
| struct snd_soc_dapm_widget *w; |
| struct skl_module_cfg *mconfig; |
| u8 cfg_idx; |
| int ret = 0; |
| |
| list_for_each_entry(w_module, &pipe->w_list, node) { |
| guid_t *uuid_mod; |
| w = w_module->w; |
| mconfig = w->priv; |
| |
| /* check if module ids are populated */ |
| if (mconfig->id.module_id < 0) { |
| dev_err(skl->dev, |
| "module %pUL id not populated\n", |
| (guid_t *)mconfig->guid); |
| return -EIO; |
| } |
| |
| cfg_idx = mconfig->pipe->cur_config_idx; |
| mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; |
| mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; |
| |
| if (mconfig->module->loadable && skl->dsp->fw_ops.load_mod) { |
| ret = skl->dsp->fw_ops.load_mod(skl->dsp, |
| mconfig->id.module_id, mconfig->guid); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* prepare the DMA if the module is gateway cpr */ |
| ret = skl_tplg_module_prepare(skl, pipe, w, mconfig); |
| if (ret < 0) |
| return ret; |
| |
| /* update blob if blob is null for be with default value */ |
| skl_tplg_update_be_blob(w, skl); |
| |
| /* |
| * apply fix/conversion to module params based on |
| * FE/BE params |
| */ |
| skl_tplg_update_module_params(w, skl); |
| uuid_mod = (guid_t *)mconfig->guid; |
| mconfig->id.pvt_id = skl_get_pvt_id(skl, uuid_mod, |
| mconfig->id.instance_id); |
| if (mconfig->id.pvt_id < 0) |
| return ret; |
| skl_tplg_set_module_init_data(w); |
| |
| ret = skl_dsp_get_core(skl->dsp, mconfig->core_id); |
| if (ret < 0) { |
| dev_err(skl->dev, "Failed to wake up core %d ret=%d\n", |
| mconfig->core_id, ret); |
| return ret; |
| } |
| |
| ret = skl_init_module(skl, mconfig); |
| if (ret < 0) { |
| skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id); |
| goto err; |
| } |
| |
| ret = skl_tplg_set_module_params(w, skl); |
| if (ret < 0) |
| goto err; |
| } |
| |
| return 0; |
| err: |
| skl_dsp_put_core(skl->dsp, mconfig->core_id); |
| return ret; |
| } |
| |
| static int skl_tplg_unload_pipe_modules(struct skl_dev *skl, |
| struct skl_pipe *pipe) |
| { |
| int ret = 0; |
| struct skl_pipe_module *w_module; |
| struct skl_module_cfg *mconfig; |
| |
| list_for_each_entry(w_module, &pipe->w_list, node) { |
| guid_t *uuid_mod; |
| mconfig = w_module->w->priv; |
| uuid_mod = (guid_t *)mconfig->guid; |
| |
| if (mconfig->module->loadable && skl->dsp->fw_ops.unload_mod) { |
| ret = skl->dsp->fw_ops.unload_mod(skl->dsp, |
| mconfig->id.module_id); |
| if (ret < 0) |
| return -EIO; |
| } |
| skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id); |
| |
| ret = skl_dsp_put_core(skl->dsp, mconfig->core_id); |
| if (ret < 0) { |
| /* don't return; continue with other modules */ |
| dev_err(skl->dev, "Failed to sleep core %d ret=%d\n", |
| mconfig->core_id, ret); |
| } |
| } |
| |
| /* no modules to unload in this path, so return */ |
| return ret; |
| } |
| |
| static bool skl_tplg_is_multi_fmt(struct skl_dev *skl, struct skl_pipe *pipe) |
| { |
| struct skl_pipe_fmt *cur_fmt; |
| struct skl_pipe_fmt *next_fmt; |
| int i; |
| |
| if (pipe->nr_cfgs <= 1) |
| return false; |
| |
| if (pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) |
| return true; |
| |
| for (i = 0; i < pipe->nr_cfgs - 1; i++) { |
| if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) { |
| cur_fmt = &pipe->configs[i].out_fmt; |
| next_fmt = &pipe->configs[i + 1].out_fmt; |
| } else { |
| cur_fmt = &pipe->configs[i].in_fmt; |
| next_fmt = &pipe->configs[i + 1].in_fmt; |
| } |
| |
| if (!CHECK_HW_PARAMS(cur_fmt->channels, cur_fmt->freq, |
| cur_fmt->bps, |
| next_fmt->channels, |
| next_fmt->freq, |
| next_fmt->bps)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Here, we select pipe format based on the pipe type and pipe |
| * direction to determine the current config index for the pipeline. |
| * The config index is then used to select proper module resources. |
| * Intermediate pipes currently have a fixed format hence we select the |
| * 0th configuratation by default for such pipes. |
| */ |
| static int |
| skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig) |
| { |
| struct skl_pipe *pipe = mconfig->pipe; |
| struct skl_pipe_params *params = pipe->p_params; |
| struct skl_path_config *pconfig = &pipe->configs[0]; |
| struct skl_pipe_fmt *fmt = NULL; |
| bool in_fmt = false; |
| int i; |
| |
| if (pipe->nr_cfgs == 0) { |
| pipe->cur_config_idx = 0; |
| return 0; |
| } |
| |
| if (skl_tplg_is_multi_fmt(skl, pipe)) { |
| pipe->cur_config_idx = pipe->pipe_config_idx; |
| pipe->memory_pages = pconfig->mem_pages; |
| dev_dbg(skl->dev, "found pipe config idx:%d\n", |
| pipe->cur_config_idx); |
| return 0; |
| } |
| |
| if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE || pipe->nr_cfgs == 1) { |
| dev_dbg(skl->dev, "No conn_type or just 1 pathcfg, taking 0th for %d\n", |
| pipe->ppl_id); |
| pipe->cur_config_idx = 0; |
| pipe->memory_pages = pconfig->mem_pages; |
| |
| return 0; |
| } |
| |
| if ((pipe->conn_type == SKL_PIPE_CONN_TYPE_FE && |
| pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) || |
| (pipe->conn_type == SKL_PIPE_CONN_TYPE_BE && |
| pipe->direction == SNDRV_PCM_STREAM_CAPTURE)) |
| in_fmt = true; |
| |
| for (i = 0; i < pipe->nr_cfgs; i++) { |
| pconfig = &pipe->configs[i]; |
| if (in_fmt) |
| fmt = &pconfig->in_fmt; |
| else |
| fmt = &pconfig->out_fmt; |
| |
| if (CHECK_HW_PARAMS(params->ch, params->s_freq, params->s_fmt, |
| fmt->channels, fmt->freq, fmt->bps)) { |
| pipe->cur_config_idx = i; |
| pipe->memory_pages = pconfig->mem_pages; |
| dev_dbg(skl->dev, "Using pipe config: %d\n", i); |
| |
| return 0; |
| } |
| } |
| |
| dev_err(skl->dev, "Invalid pipe config: %d %d %d for pipe: %d\n", |
| params->ch, params->s_freq, params->s_fmt, pipe->ppl_id); |
| return -EINVAL; |
| } |
| |
| /* |
| * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we |
| * need create the pipeline. So we do following: |
| * - Create the pipeline |
| * - Initialize the modules in pipeline |
| * - finally bind all modules together |
| */ |
| static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| int ret; |
| struct skl_module_cfg *mconfig = w->priv; |
| struct skl_pipe_module *w_module; |
| struct skl_pipe *s_pipe = mconfig->pipe; |
| struct skl_module_cfg *src_module = NULL, *dst_module, *module; |
| struct skl_module_deferred_bind *modules; |
| |
| ret = skl_tplg_get_pipe_config(skl, mconfig); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Create a list of modules for pipe. |
| * This list contains modules from source to sink |
| */ |
| ret = skl_create_pipeline(skl, mconfig->pipe); |
| if (ret < 0) |
| return ret; |
| |
| /* Init all pipe modules from source to sink */ |
| ret = skl_tplg_init_pipe_modules(skl, s_pipe); |
| if (ret < 0) |
| return ret; |
| |
| /* Bind modules from source to sink */ |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { |
| dst_module = w_module->w->priv; |
| |
| if (src_module == NULL) { |
| src_module = dst_module; |
| continue; |
| } |
| |
| ret = skl_bind_modules(skl, src_module, dst_module); |
| if (ret < 0) |
| return ret; |
| |
| src_module = dst_module; |
| } |
| |
| /* |
| * When the destination module is initialized, check for these modules |
| * in deferred bind list. If found, bind them. |
| */ |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { |
| if (list_empty(&skl->bind_list)) |
| break; |
| |
| list_for_each_entry(modules, &skl->bind_list, node) { |
| module = w_module->w->priv; |
| if (modules->dst == module) |
| skl_bind_modules(skl, modules->src, |
| modules->dst); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skl_fill_sink_instance_id(struct skl_dev *skl, u32 *params, |
| int size, struct skl_module_cfg *mcfg) |
| { |
| int i, pvt_id; |
| |
| if (mcfg->m_type == SKL_MODULE_TYPE_KPB) { |
| struct skl_kpb_params *kpb_params = |
| (struct skl_kpb_params *)params; |
| struct skl_mod_inst_map *inst = kpb_params->u.map; |
| |
| for (i = 0; i < kpb_params->num_modules; i++) { |
| pvt_id = skl_get_pvt_instance_id_map(skl, inst->mod_id, |
| inst->inst_id); |
| if (pvt_id < 0) |
| return -EINVAL; |
| |
| inst->inst_id = pvt_id; |
| inst++; |
| } |
| } |
| |
| return 0; |
| } |
| /* |
| * Some modules require params to be set after the module is bound to |
| * all pins connected. |
| * |
| * The module provider initializes set_param flag for such modules and we |
| * send params after binding |
| */ |
| static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, |
| struct skl_module_cfg *mcfg, struct skl_dev *skl) |
| { |
| int i, ret; |
| struct skl_module_cfg *mconfig = w->priv; |
| const struct snd_kcontrol_new *k; |
| struct soc_bytes_ext *sb; |
| struct skl_algo_data *bc; |
| struct skl_specific_cfg *sp_cfg; |
| u32 *params; |
| |
| /* |
| * check all out/in pins are in bind state. |
| * if so set the module param |
| */ |
| for (i = 0; i < mcfg->module->max_output_pins; i++) { |
| if (mcfg->m_out_pin[i].pin_state != SKL_PIN_BIND_DONE) |
| return 0; |
| } |
| |
| for (i = 0; i < mcfg->module->max_input_pins; i++) { |
| if (mcfg->m_in_pin[i].pin_state != SKL_PIN_BIND_DONE) |
| return 0; |
| } |
| |
| if (mconfig->formats_config[SKL_PARAM_BIND].caps_size > 0 && |
| mconfig->formats_config[SKL_PARAM_BIND].set_params == |
| SKL_PARAM_BIND) { |
| sp_cfg = &mconfig->formats_config[SKL_PARAM_BIND]; |
| ret = skl_set_module_params(skl, sp_cfg->caps, |
| sp_cfg->caps_size, |
| sp_cfg->param_id, mconfig); |
| if (ret < 0) |
| return ret; |
| } |
| |
| for (i = 0; i < w->num_kcontrols; i++) { |
| k = &w->kcontrol_news[i]; |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { |
| sb = (void *) k->private_value; |
| bc = (struct skl_algo_data *)sb->dobj.private; |
| |
| if (bc->set_params == SKL_PARAM_BIND) { |
| params = kmemdup(bc->params, bc->max, GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| skl_fill_sink_instance_id(skl, params, bc->max, |
| mconfig); |
| |
| ret = skl_set_module_params(skl, params, |
| bc->max, bc->param_id, mconfig); |
| kfree(params); |
| |
| if (ret < 0) |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skl_get_module_id(struct skl_dev *skl, guid_t *uuid) |
| { |
| struct uuid_module *module; |
| |
| list_for_each_entry(module, &skl->uuid_list, list) { |
| if (guid_equal(uuid, &module->uuid)) |
| return module->id; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int skl_tplg_find_moduleid_from_uuid(struct skl_dev *skl, |
| const struct snd_kcontrol_new *k) |
| { |
| struct soc_bytes_ext *sb = (void *) k->private_value; |
| struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private; |
| struct skl_kpb_params *uuid_params, *params; |
| struct hdac_bus *bus = skl_to_bus(skl); |
| int i, size, module_id; |
| |
| if (bc->set_params == SKL_PARAM_BIND && bc->max) { |
| uuid_params = (struct skl_kpb_params *)bc->params; |
| size = struct_size(params, u.map, uuid_params->num_modules); |
| |
| params = devm_kzalloc(bus->dev, size, GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| params->num_modules = uuid_params->num_modules; |
| |
| for (i = 0; i < uuid_params->num_modules; i++) { |
| module_id = skl_get_module_id(skl, |
| &uuid_params->u.map_uuid[i].mod_uuid); |
| if (module_id < 0) { |
| devm_kfree(bus->dev, params); |
| return -EINVAL; |
| } |
| |
| params->u.map[i].mod_id = module_id; |
| params->u.map[i].inst_id = |
| uuid_params->u.map_uuid[i].inst_id; |
| } |
| |
| devm_kfree(bus->dev, bc->params); |
| bc->params = (char *)params; |
| bc->max = size; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Retrieve the module id from UUID mentioned in the |
| * post bind params |
| */ |
| void skl_tplg_add_moduleid_in_bind_params(struct skl_dev *skl, |
| struct snd_soc_dapm_widget *w) |
| { |
| struct skl_module_cfg *mconfig = w->priv; |
| int i; |
| |
| /* |
| * Post bind params are used for only for KPB |
| * to set copier instances to drain the data |
| * in fast mode |
| */ |
| if (mconfig->m_type != SKL_MODULE_TYPE_KPB) |
| return; |
| |
| for (i = 0; i < w->num_kcontrols; i++) |
| if ((w->kcontrol_news[i].access & |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) && |
| (skl_tplg_find_moduleid_from_uuid(skl, |
| &w->kcontrol_news[i]) < 0)) |
| dev_err(skl->dev, |
| "%s: invalid kpb post bind params\n", |
| __func__); |
| } |
| |
| static int skl_tplg_module_add_deferred_bind(struct skl_dev *skl, |
| struct skl_module_cfg *src, struct skl_module_cfg *dst) |
| { |
| struct skl_module_deferred_bind *m_list, *modules; |
| int i; |
| |
| /* only supported for module with static pin connection */ |
| for (i = 0; i < dst->module->max_input_pins; i++) { |
| struct skl_module_pin *pin = &dst->m_in_pin[i]; |
| |
| if (pin->is_dynamic) |
| continue; |
| |
| if ((pin->id.module_id == src->id.module_id) && |
| (pin->id.instance_id == src->id.instance_id)) { |
| |
| if (!list_empty(&skl->bind_list)) { |
| list_for_each_entry(modules, &skl->bind_list, node) { |
| if (modules->src == src && modules->dst == dst) |
| return 0; |
| } |
| } |
| |
| m_list = kzalloc(sizeof(*m_list), GFP_KERNEL); |
| if (!m_list) |
| return -ENOMEM; |
| |
| m_list->src = src; |
| m_list->dst = dst; |
| |
| list_add(&m_list->node, &skl->bind_list); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl, |
| struct snd_soc_dapm_widget *src_w, |
| struct skl_module_cfg *src_mconfig) |
| { |
| struct snd_soc_dapm_path *p; |
| struct snd_soc_dapm_widget *sink = NULL, *next_sink = NULL; |
| struct skl_module_cfg *sink_mconfig; |
| int ret; |
| |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { |
| if (!p->connect) |
| continue; |
| |
| dev_dbg(skl->dev, |
| "%s: src widget=%s\n", __func__, w->name); |
| dev_dbg(skl->dev, |
| "%s: sink widget=%s\n", __func__, p->sink->name); |
| |
| next_sink = p->sink; |
| |
| if (!is_skl_dsp_widget_type(p->sink, skl->dev)) |
| return skl_tplg_bind_sinks(p->sink, skl, src_w, src_mconfig); |
| |
| /* |
| * here we will check widgets in sink pipelines, so that |
| * can be any widgets type and we are only interested if |
| * they are ones used for SKL so check that first |
| */ |
| if ((p->sink->priv != NULL) && |
| is_skl_dsp_widget_type(p->sink, skl->dev)) { |
| |
| sink = p->sink; |
| sink_mconfig = sink->priv; |
| |
| /* |
| * Modules other than PGA leaf can be connected |
| * directly or via switch to a module in another |
| * pipeline. EX: reference path |
| * when the path is enabled, the dst module that needs |
| * to be bound may not be initialized. if the module is |
| * not initialized, add these modules in the deferred |
| * bind list and when the dst module is initialised, |
| * bind this module to the dst_module in deferred list. |
| */ |
| if (((src_mconfig->m_state == SKL_MODULE_INIT_DONE) |
| && (sink_mconfig->m_state == SKL_MODULE_UNINIT))) { |
| |
| ret = skl_tplg_module_add_deferred_bind(skl, |
| src_mconfig, sink_mconfig); |
| |
| if (ret < 0) |
| return ret; |
| |
| } |
| |
| |
| if (src_mconfig->m_state == SKL_MODULE_UNINIT || |
| sink_mconfig->m_state == SKL_MODULE_UNINIT) |
| continue; |
| |
| /* Bind source to sink, mixin is always source */ |
| ret = skl_bind_modules(skl, src_mconfig, sink_mconfig); |
| if (ret) |
| return ret; |
| |
| /* set module params after bind */ |
| skl_tplg_set_module_bind_params(src_w, |
| src_mconfig, skl); |
| skl_tplg_set_module_bind_params(sink, |
| sink_mconfig, skl); |
| |
| /* Start sinks pipe first */ |
| if (sink_mconfig->pipe->state != SKL_PIPE_STARTED) { |
| if (sink_mconfig->pipe->conn_type != |
| SKL_PIPE_CONN_TYPE_FE) |
| ret = skl_run_pipe(skl, |
| sink_mconfig->pipe); |
| if (ret) |
| return ret; |
| } |
| } |
| } |
| |
| if (!sink && next_sink) |
| return skl_tplg_bind_sinks(next_sink, skl, src_w, src_mconfig); |
| |
| return 0; |
| } |
| |
| /* |
| * A PGA represents a module in a pipeline. So in the Pre-PMU event of PGA |
| * we need to do following: |
| * - Bind to sink pipeline |
| * Since the sink pipes can be running and we don't get mixer event on |
| * connect for already running mixer, we need to find the sink pipes |
| * here and bind to them. This way dynamic connect works. |
| * - Start sink pipeline, if not running |
| * - Then run current pipe |
| */ |
| static int skl_tplg_pga_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *src_mconfig; |
| int ret = 0; |
| |
| src_mconfig = w->priv; |
| |
| /* |
| * find which sink it is connected to, bind with the sink, |
| * if sink is not started, start sink pipe first, then start |
| * this pipe |
| */ |
| ret = skl_tplg_bind_sinks(w, skl, w, src_mconfig); |
| if (ret) |
| return ret; |
| |
| /* Start source pipe last after starting all sinks */ |
| if (src_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) |
| return skl_run_pipe(skl, src_mconfig->pipe); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dapm_widget *skl_get_src_dsp_widget( |
| struct snd_soc_dapm_widget *w, struct skl_dev *skl) |
| { |
| struct snd_soc_dapm_path *p; |
| struct snd_soc_dapm_widget *src_w = NULL; |
| |
| snd_soc_dapm_widget_for_each_source_path(w, p) { |
| src_w = p->source; |
| if (!p->connect) |
| continue; |
| |
| dev_dbg(skl->dev, "sink widget=%s\n", w->name); |
| dev_dbg(skl->dev, "src widget=%s\n", p->source->name); |
| |
| /* |
| * here we will check widgets in sink pipelines, so that can |
| * be any widgets type and we are only interested if they are |
| * ones used for SKL so check that first |
| */ |
| if ((p->source->priv != NULL) && |
| is_skl_dsp_widget_type(p->source, skl->dev)) { |
| return p->source; |
| } |
| } |
| |
| if (src_w != NULL) |
| return skl_get_src_dsp_widget(src_w, skl); |
| |
| return NULL; |
| } |
| |
| /* |
| * in the Post-PMU event of mixer we need to do following: |
| * - Check if this pipe is running |
| * - if not, then |
| * - bind this pipeline to its source pipeline |
| * if source pipe is already running, this means it is a dynamic |
| * connection and we need to bind only to that pipe |
| * - start this pipeline |
| */ |
| static int skl_tplg_mixer_dapm_post_pmu_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| int ret = 0; |
| struct snd_soc_dapm_widget *source, *sink; |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; |
| int src_pipe_started = 0; |
| |
| sink = w; |
| sink_mconfig = sink->priv; |
| |
| /* |
| * If source pipe is already started, that means source is driving |
| * one more sink before this sink got connected, Since source is |
| * started, bind this sink to source and start this pipe. |
| */ |
| source = skl_get_src_dsp_widget(w, skl); |
| if (source != NULL) { |
| src_mconfig = source->priv; |
| sink_mconfig = sink->priv; |
| src_pipe_started = 1; |
| |
| /* |
| * check pipe state, then no need to bind or start the |
| * pipe |
| */ |
| if (src_mconfig->pipe->state != SKL_PIPE_STARTED) |
| src_pipe_started = 0; |
| } |
| |
| if (src_pipe_started) { |
| ret = skl_bind_modules(skl, src_mconfig, sink_mconfig); |
| if (ret) |
| return ret; |
| |
| /* set module params after bind */ |
| skl_tplg_set_module_bind_params(source, src_mconfig, skl); |
| skl_tplg_set_module_bind_params(sink, sink_mconfig, skl); |
| |
| if (sink_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) |
| ret = skl_run_pipe(skl, sink_mconfig->pipe); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * in the Pre-PMD event of mixer we need to do following: |
| * - Stop the pipe |
| * - find the source connections and remove that from dapm_path_list |
| * - unbind with source pipelines if still connected |
| */ |
| static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; |
| int ret = 0, i; |
| |
| sink_mconfig = w->priv; |
| |
| /* Stop the pipe */ |
| ret = skl_stop_pipe(skl, sink_mconfig->pipe); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < sink_mconfig->module->max_input_pins; i++) { |
| if (sink_mconfig->m_in_pin[i].pin_state == SKL_PIN_BIND_DONE) { |
| src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg; |
| if (!src_mconfig) |
| continue; |
| |
| ret = skl_unbind_modules(skl, |
| src_mconfig, sink_mconfig); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * in the Post-PMD event of mixer we need to do following: |
| * - Unbind the modules within the pipeline |
| * - Delete the pipeline (modules are not required to be explicitly |
| * deleted, pipeline delete is enough here |
| */ |
| static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *mconfig = w->priv; |
| struct skl_pipe_module *w_module; |
| struct skl_module_cfg *src_module = NULL, *dst_module; |
| struct skl_pipe *s_pipe = mconfig->pipe; |
| struct skl_module_deferred_bind *modules, *tmp; |
| |
| if (s_pipe->state == SKL_PIPE_INVALID) |
| return -EINVAL; |
| |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { |
| if (list_empty(&skl->bind_list)) |
| break; |
| |
| src_module = w_module->w->priv; |
| |
| list_for_each_entry_safe(modules, tmp, &skl->bind_list, node) { |
| /* |
| * When the destination module is deleted, Unbind the |
| * modules from deferred bind list. |
| */ |
| if (modules->dst == src_module) { |
| skl_unbind_modules(skl, modules->src, |
| modules->dst); |
| } |
| |
| /* |
| * When the source module is deleted, remove this entry |
| * from the deferred bind list. |
| */ |
| if (modules->src == src_module) { |
| list_del(&modules->node); |
| modules->src = NULL; |
| modules->dst = NULL; |
| kfree(modules); |
| } |
| } |
| } |
| |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { |
| dst_module = w_module->w->priv; |
| |
| if (src_module == NULL) { |
| src_module = dst_module; |
| continue; |
| } |
| |
| skl_unbind_modules(skl, src_module, dst_module); |
| src_module = dst_module; |
| } |
| |
| skl_delete_pipe(skl, mconfig->pipe); |
| |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { |
| src_module = w_module->w->priv; |
| src_module->m_state = SKL_MODULE_UNINIT; |
| } |
| |
| return skl_tplg_unload_pipe_modules(skl, s_pipe); |
| } |
| |
| /* |
| * in the Post-PMD event of PGA we need to do following: |
| * - Stop the pipeline |
| * - In source pipe is connected, unbind with source pipelines |
| */ |
| static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, |
| struct skl_dev *skl) |
| { |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; |
| int ret = 0, i; |
| |
| src_mconfig = w->priv; |
| |
| /* Stop the pipe since this is a mixin module */ |
| ret = skl_stop_pipe(skl, src_mconfig->pipe); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < src_mconfig->module->max_output_pins; i++) { |
| if (src_mconfig->m_out_pin[i].pin_state == SKL_PIN_BIND_DONE) { |
| sink_mconfig = src_mconfig->m_out_pin[i].tgt_mcfg; |
| if (!sink_mconfig) |
| continue; |
| /* |
| * This is a connecter and if path is found that means |
| * unbind between source and sink has not happened yet |
| */ |
| ret = skl_unbind_modules(skl, src_mconfig, |
| sink_mconfig); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * In modelling, we assume there will be ONLY one mixer in a pipeline. If a |
| * second one is required that is created as another pipe entity. |
| * The mixer is responsible for pipe management and represent a pipeline |
| * instance |
| */ |
| static int skl_tplg_mixer_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| struct snd_soc_dapm_context *dapm = w->dapm; |
| struct skl_dev *skl = get_skl_ctx(dapm->dev); |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| return skl_tplg_mixer_dapm_pre_pmu_event(w, skl); |
| |
| case SND_SOC_DAPM_POST_PMU: |
| return skl_tplg_mixer_dapm_post_pmu_event(w, skl); |
| |
| case SND_SOC_DAPM_PRE_PMD: |
| return skl_tplg_mixer_dapm_pre_pmd_event(w, skl); |
| |
| case SND_SOC_DAPM_POST_PMD: |
| return skl_tplg_mixer_dapm_post_pmd_event(w, skl); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * In modelling, we assumed rest of the modules in pipeline are PGA. But we |
| * are interested in last PGA (leaf PGA) in a pipeline to disconnect with |
| * the sink when it is running (two FE to one BE or one FE to two BE) |
| * scenarios |
| */ |
| static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| |
| { |
| struct snd_soc_dapm_context *dapm = w->dapm; |
| struct skl_dev *skl = get_skl_ctx(dapm->dev); |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| return skl_tplg_pga_dapm_pre_pmu_event(w, skl); |
| |
| case SND_SOC_DAPM_POST_PMD: |
| return skl_tplg_pga_dapm_post_pmd_event(w, skl); |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol, |
| bool is_set) |
| { |
| struct snd_soc_component *component = |
| snd_soc_kcontrol_component(kcontrol); |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(component); |
| struct skl_dev *skl = bus_to_skl(bus); |
| struct skl_pipeline *ppl; |
| struct skl_pipe *pipe = NULL; |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; |
| u32 *pipe_id; |
| |
| if (!ec) |
| return -EINVAL; |
| |
| if (is_set && ucontrol->value.enumerated.item[0] > ec->items) |
| return -EINVAL; |
| |
| pipe_id = ec->dobj.private; |
| |
| list_for_each_entry(ppl, &skl->ppl_list, node) { |
| if (ppl->pipe->ppl_id == *pipe_id) { |
| pipe = ppl->pipe; |
| break; |
| } |
| } |
| if (!pipe) |
| return -EIO; |
| |
| if (is_set) |
| pipe->pipe_config_idx = ucontrol->value.enumerated.item[0]; |
| else |
| ucontrol->value.enumerated.item[0] = pipe->pipe_config_idx; |
| |
| return 0; |
| } |
| |
| static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); |
| } |
| |
| static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); |
| } |
| |
| static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); |
| } |
| |
| static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); |
| } |
| |
| static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, |
| unsigned int __user *data, unsigned int size) |
| { |
| struct soc_bytes_ext *sb = |
| (struct soc_bytes_ext *)kcontrol->private_value; |
| struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private; |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); |
| struct skl_module_cfg *mconfig = w->priv; |
| struct skl_dev *skl = get_skl_ctx(w->dapm->dev); |
| |
| if (w->power) |
| skl_get_module_params(skl, (u32 *)bc->params, |
| bc->size, bc->param_id, mconfig); |
| |
| /* decrement size for TLV header */ |
| size -= 2 * sizeof(u32); |
| |
| /* check size as we don't want to send kernel data */ |
| if (size > bc->max) |
| size = bc->max; |
| |
| if (bc->params) { |
| if (copy_to_user(data, &bc->param_id, sizeof(u32))) |
| return -EFAULT; |
| if (copy_to_user(data + 1, &size, sizeof(u32))) |
| return -EFAULT; |
| if (copy_to_user(data + 2, bc->params, size)) |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| #define SKL_PARAM_VENDOR_ID 0xff |
| |
| static int skl_tplg_tlv_control_set(struct snd_kcontrol *kcontrol, |
| const unsigned int __user *data, unsigned int size) |
| { |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); |
| struct skl_module_cfg *mconfig = w->priv; |
| struct soc_bytes_ext *sb = |
| (struct soc_bytes_ext *)kcontrol->private_value; |
| struct skl_algo_data *ac = (struct skl_algo_data *)sb->dobj.private; |
| struct skl_dev *skl = get_skl_ctx(w->dapm->dev); |
| |
| if (ac->params) { |
| if (size > ac->max) |
| return -EINVAL; |
| ac->size = size; |
| |
| if (copy_from_user(ac->params, data, size)) |
| return -EFAULT; |
| |
| if (w->power) |
| return skl_set_module_params(skl, |
| (u32 *)ac->params, ac->size, |
| ac->param_id, mconfig); |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_mic_control_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); |
| struct skl_module_cfg *mconfig = w->priv; |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; |
| u32 ch_type = *((u32 *)ec->dobj.private); |
| |
| if (mconfig->dmic_ch_type == ch_type) |
| ucontrol->value.enumerated.item[0] = |
| mconfig->dmic_ch_combo_index; |
| else |
| ucontrol->value.enumerated.item[0] = 0; |
| |
| return 0; |
| } |
| |
| static int skl_fill_mic_sel_params(struct skl_module_cfg *mconfig, |
| struct skl_mic_sel_config *mic_cfg, struct device *dev) |
| { |
| struct skl_specific_cfg *sp_cfg = |
| &mconfig->formats_config[SKL_PARAM_INIT]; |
| |
| sp_cfg->caps_size = sizeof(struct skl_mic_sel_config); |
| sp_cfg->set_params = SKL_PARAM_SET; |
| sp_cfg->param_id = 0x00; |
| if (!sp_cfg->caps) { |
| sp_cfg->caps = devm_kzalloc(dev, sp_cfg->caps_size, GFP_KERNEL); |
| if (!sp_cfg->caps) |
| return -ENOMEM; |
| } |
| |
| mic_cfg->mic_switch = SKL_MIC_SEL_SWITCH; |
| mic_cfg->flags = 0; |
| memcpy(sp_cfg->caps, mic_cfg, sp_cfg->caps_size); |
| |
| return 0; |
| } |
| |
| static int skl_tplg_mic_control_set(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); |
| struct skl_module_cfg *mconfig = w->priv; |
| struct skl_mic_sel_config mic_cfg = {0}; |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; |
| u32 ch_type = *((u32 *)ec->dobj.private); |
| const int *list; |
| u8 in_ch, out_ch, index; |
| |
| mconfig->dmic_ch_type = ch_type; |
| mconfig->dmic_ch_combo_index = ucontrol->value.enumerated.item[0]; |
| |
| /* enum control index 0 is INVALID, so no channels to be set */ |
| if (mconfig->dmic_ch_combo_index == 0) |
| return 0; |
| |
| /* No valid channel selection map for index 0, so offset by 1 */ |
| index = mconfig->dmic_ch_combo_index - 1; |
| |
| switch (ch_type) { |
| case SKL_CH_MONO: |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_mono_list)) |
| return -EINVAL; |
| |
| list = &mic_mono_list[index]; |
| break; |
| |
| case SKL_CH_STEREO: |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_stereo_list)) |
| return -EINVAL; |
| |
| list = mic_stereo_list[index]; |
| break; |
| |
| case SKL_CH_TRIO: |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_trio_list)) |
| return -EINVAL; |
| |
| list = mic_trio_list[index]; |
| break; |
| |
| case SKL_CH_QUATRO: |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_quatro_list)) |
| return -EINVAL; |
| |
| list = mic_quatro_list[index]; |
| break; |
| |
| default: |
| dev_err(w->dapm->dev, |
| "Invalid channel %d for mic_select module\n", |
| ch_type); |
| return -EINVAL; |
| |
| } |
| |
| /* channel type enum map to number of chanels for that type */ |
| for (out_ch = 0; out_ch < ch_type; out_ch++) { |
| in_ch = list[out_ch]; |
| mic_cfg.blob[out_ch][in_ch] = SKL_DEFAULT_MIC_SEL_GAIN; |
| } |
| |
| return skl_fill_mic_sel_params(mconfig, &mic_cfg, w->dapm->dev); |
| } |
| |
| /* |
| * Fill the dma id for host and link. In case of passthrough |
| * pipeline, this will both host and link in the same |
| * pipeline, so need to copy the link and host based on dev_type |
| */ |
| static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg, |
| struct skl_pipe_params *params) |
| { |
| struct skl_pipe *pipe = mcfg->pipe; |
| |
| if (pipe->passthru) { |
| switch (mcfg->dev_type) { |
| case SKL_DEVICE_HDALINK: |
| pipe->p_params->link_dma_id = params->link_dma_id; |
| pipe->p_params->link_index = params->link_index; |
| pipe->p_params->link_bps = params->link_bps; |
| break; |
| |
| case SKL_DEVICE_HDAHOST: |
| pipe->p_params->host_dma_id = params->host_dma_id; |
| pipe->p_params->host_bps = params->host_bps; |
| break; |
| |
| default: |
| break; |
| } |
| pipe->p_params->s_fmt = params->s_fmt; |
| pipe->p_params->ch = params->ch; |
| pipe->p_params->s_freq = params->s_freq; |
| pipe->p_params->stream = params->stream; |
| pipe->p_params->format = params->format; |
| |
| } else { |
| memcpy(pipe->p_params, params, sizeof(*params)); |
| } |
| } |
| |
| /* |
| * The FE params are passed by hw_params of the DAI. |
| * On hw_params, the params are stored in Gateway module of the FE and we |
| * need to calculate the format in DSP module configuration, that |
| * conversion is done here |
| */ |
| int skl_tplg_update_pipe_params(struct device *dev, |
| struct skl_module_cfg *mconfig, |
| struct skl_pipe_params *params) |
| { |
| struct skl_module_res *res; |
| struct skl_dev *skl = get_skl_ctx(dev); |
| struct skl_module_fmt *format = NULL; |
| u8 cfg_idx = mconfig->pipe->cur_config_idx; |
| |
| res = &mconfig->module->resources[mconfig->res_idx]; |
| skl_tplg_fill_dma_id(mconfig, params); |
| mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; |
| mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; |
| |
| if (skl->nr_modules) |
| return 0; |
| |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| format = &mconfig->module->formats[mconfig->fmt_idx].inputs[0].fmt; |
| else |
| format = &mconfig->module->formats[mconfig->fmt_idx].outputs[0].fmt; |
| |
| /* set the hw_params */ |
| format->s_freq = params->s_freq; |
| format->channels = params->ch; |
| format->valid_bit_depth = skl_get_bit_depth(params->s_fmt); |
| |
| /* |
| * 16 bit is 16 bit container whereas 24 bit is in 32 bit |
| * container so update bit depth accordingly |
| */ |
| switch (format->valid_bit_depth) { |
| case SKL_DEPTH_16BIT: |
| format->bit_depth = format->valid_bit_depth; |
| break; |
| |
| case SKL_DEPTH_24BIT: |
| case SKL_DEPTH_32BIT: |
| format->bit_depth = SKL_DEPTH_32BIT; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid bit depth %x for pipe\n", |
| format->valid_bit_depth); |
| return -EINVAL; |
| } |
| |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| res->ibs = (format->s_freq / 1000) * |
| (format->channels) * |
| (format->bit_depth >> 3); |
| } else { |
| res->obs = (format->s_freq / 1000) * |
| (format->channels) * |
| (format->bit_depth >> 3); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Query the module config for the FE DAI |
| * This is used to find the hw_params set for that DAI and apply to FE |
| * pipeline |
| */ |
| struct skl_module_cfg * |
| skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream) |
| { |
| struct snd_soc_dapm_widget *w; |
| struct snd_soc_dapm_path *p = NULL; |
| |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| w = dai->playback_widget; |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { |
| if (p->connect && p->sink->power && |
| !is_skl_dsp_widget_type(p->sink, dai->dev)) |
| continue; |
| |
| if (p->sink->priv) { |
| dev_dbg(dai->dev, "set params for %s\n", |
| p->sink->name); |
| return p->sink->priv; |
| } |
| } |
| } else { |
| w = dai->capture_widget; |
| snd_soc_dapm_widget_for_each_source_path(w, p) { |
| if (p->connect && p->source->power && |
| !is_skl_dsp_widget_type(p->source, dai->dev)) |
| continue; |
| |
| if (p->source->priv) { |
| dev_dbg(dai->dev, "set params for %s\n", |
| p->source->name); |
| return p->source->priv; |
| } |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static struct skl_module_cfg *skl_get_mconfig_pb_cpr( |
| struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w) |
| { |
| struct snd_soc_dapm_path *p; |
| struct skl_module_cfg *mconfig = NULL; |
| |
| snd_soc_dapm_widget_for_each_source_path(w, p) { |
| if (w->endpoints[SND_SOC_DAPM_DIR_OUT] > 0) { |
| if (p->connect && |
| (p->sink->id == snd_soc_dapm_aif_out) && |
| p->source->priv) { |
| mconfig = p->source->priv; |
| return mconfig; |
| } |
| mconfig = skl_get_mconfig_pb_cpr(dai, p->source); |
| if (mconfig) |
| return mconfig; |
| } |
| } |
| return mconfig; |
| } |
| |
| static struct skl_module_cfg *skl_get_mconfig_cap_cpr( |
| struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w) |
| { |
| struct snd_soc_dapm_path *p; |
| struct skl_module_cfg *mconfig = NULL; |
| |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { |
| if (w->endpoints[SND_SOC_DAPM_DIR_IN] > 0) { |
| if (p->connect && |
| (p->source->id == snd_soc_dapm_aif_in) && |
| p->sink->priv) { |
| mconfig = p->sink->priv; |
| return mconfig; |
| } |
| mconfig = skl_get_mconfig_cap_cpr(dai, p->sink); |
| if (mconfig) |
| return mconfig; |
| } |
| } |
| return mconfig; |
| } |
| |
| struct skl_module_cfg * |
| skl_tplg_be_get_cpr_module(struct snd_soc_dai *dai, int stream) |
| { |
| struct snd_soc_dapm_widget *w; |
| struct skl_module_cfg *mconfig; |
| |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| w = dai->playback_widget; |
| mconfig = skl_get_mconfig_pb_cpr(dai, w); |
| } else { |
| w = dai->capture_widget; |
| mconfig = skl_get_mconfig_cap_cpr(dai, w); |
| } |
| return mconfig; |
| } |
| |
| static u8 skl_tplg_be_link_type(int dev_type) |
| { |
| int ret; |
| |
| switch (dev_type) { |
| case SKL_DEVICE_BT: |
| ret = NHLT_LINK_SSP; |
| break; |
| |
| case SKL_DEVICE_DMIC: |
| ret = NHLT_LINK_DMIC; |
| break; |
| |
| case SKL_DEVICE_I2S: |
| ret = NHLT_LINK_SSP; |
| break; |
| |
| case SKL_DEVICE_HDALINK: |
| ret = NHLT_LINK_HDA; |
| break; |
| |
| default: |
| ret = NHLT_LINK_INVALID; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Fill the BE gateway parameters |
| * The BE gateway expects a blob of parameters which are kept in the ACPI |
| * NHLT blob, so query the blob for interface type (i2s/pdm) and instance. |
| * The port can have multiple settings so pick based on the pipeline |
| * parameters |
| */ |
| static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai, |
| struct skl_module_cfg *mconfig, |
| struct skl_pipe_params *params) |
| { |
| struct nhlt_specific_cfg *cfg; |
| struct skl_pipe *pipe = mconfig->pipe; |
| struct skl_pipe_fmt *pipe_fmt; |
| struct skl_dev *skl = get_skl_ctx(dai->dev); |
| int link_type = skl_tplg_be_link_type(mconfig->dev_type); |
| u8 dev_type = skl_tplg_be_dev_type(mconfig->dev_type); |
| |
| skl_tplg_fill_dma_id(mconfig, params); |
| |
| if (link_type == NHLT_LINK_HDA) |
| return 0; |
| |
| if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) |
| pipe_fmt = &pipe->configs[pipe->pipe_config_idx].out_fmt; |
| else |
| pipe_fmt = &pipe->configs[pipe->pipe_config_idx].in_fmt; |
| |
| /* update the blob based on virtual bus_id*/ |
| cfg = intel_nhlt_get_endpoint_blob(dai->dev, skl->nhlt, |
| mconfig->vbus_id, link_type, |
| pipe_fmt->bps, params->s_cont, |
| pipe_fmt->channels, pipe_fmt->freq, |
| pipe->direction, dev_type); |
| if (cfg) { |
| mconfig->formats_config[SKL_PARAM_INIT].caps_size = cfg->size; |
| mconfig->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps; |
| } else { |
| dev_err(dai->dev, "Blob NULL for id:%d type:%d dirn:%d ch:%d, freq:%d, fmt:%d\n", |
| mconfig->vbus_id, link_type, params->stream, |
| params->ch, params->s_freq, params->s_fmt); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai, |
| struct snd_soc_dapm_widget *w, |
| struct skl_pipe_params *params) |
| { |
| struct snd_soc_dapm_path *p; |
| int ret = -EIO; |
| |
| snd_soc_dapm_widget_for_each_source_path(w, p) { |
| if (p->connect && is_skl_dsp_widget_type(p->source, dai->dev) && |
| p->source->priv) { |
| |
| ret = skl_tplg_be_fill_pipe_params(dai, |
| p->source->priv, params); |
| if (ret < 0) |
| return ret; |
| } else { |
| ret = skl_tplg_be_set_src_pipe_params(dai, |
| p->source, params); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai, |
| struct snd_soc_dapm_widget *w, struct skl_pipe_params *params) |
| { |
| struct snd_soc_dapm_path *p; |
| int ret = -EIO; |
| |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { |
| if (p->connect && is_skl_dsp_widget_type(p->sink, dai->dev) && |
| p->sink->priv) { |
| |
| ret = skl_tplg_be_fill_pipe_params(dai, |
| p->sink->priv, params); |
| if (ret < 0) |
| return ret; |
| } else { |
| ret = skl_tplg_be_set_sink_pipe_params( |
| dai, p->sink, params); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * BE hw_params can be a source parameters (capture) or sink parameters |
| * (playback). Based on sink and source we need to either find the source |
| * list or the sink list and set the pipeline parameters |
| */ |
| int skl_tplg_be_update_params(struct snd_soc_dai *dai, |
| struct skl_pipe_params *params) |
| { |
| struct snd_soc_dapm_widget *w; |
| |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| w = dai->playback_widget; |
| |
| return skl_tplg_be_set_src_pipe_params(dai, w, params); |
| |
| } else { |
| w = dai->capture_widget; |
| |
| return skl_tplg_be_set_sink_pipe_params(dai, w, params); |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = { |
| {SKL_MIXER_EVENT, skl_tplg_mixer_event}, |
| {SKL_VMIXER_EVENT, skl_tplg_mixer_event}, |
| {SKL_PGA_EVENT, skl_tplg_pga_event}, |
| }; |
| |
| static const struct snd_soc_tplg_bytes_ext_ops skl_tlv_ops[] = { |
| {SKL_CONTROL_TYPE_BYTE_TLV, skl_tplg_tlv_control_get, |
| skl_tplg_tlv_control_set}, |
| }; |
| |
| static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = { |
| { |
| .id = SKL_CONTROL_TYPE_MIC_SELECT, |
| .get = skl_tplg_mic_control_get, |
| .put = skl_tplg_mic_control_set, |
| }, |
| { |
| .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT, |
| .get = skl_tplg_multi_config_get, |
| .put = skl_tplg_multi_config_set, |
| }, |
| { |
| .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC, |
| .get = skl_tplg_multi_config_get_dmic, |
| .put = skl_tplg_multi_config_set_dmic, |
| } |
| }; |
| |
| static int skl_tplg_fill_pipe_cfg(struct device *dev, |
| struct skl_pipe *pipe, u32 tkn, |
| u32 tkn_val, int conf_idx, int dir) |
| { |
| struct skl_pipe_fmt *fmt; |
| struct skl_path_config *config; |
| |
| switch (dir) { |
| case SKL_DIR_IN: |
| fmt = &pipe->configs[conf_idx].in_fmt; |
| break; |
| |
| case SKL_DIR_OUT: |
| fmt = &pipe->configs[conf_idx].out_fmt; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid direction: %d\n", dir); |
| return -EINVAL; |
| } |
| |
| config = &pipe->configs[conf_idx]; |
| |
| switch (tkn) { |
| case SKL_TKN_U32_CFG_FREQ: |
| fmt->freq = tkn_val; |
| break; |
| |
| case SKL_TKN_U8_CFG_CHAN: |
| fmt->channels = tkn_val; |
| break; |
| |
| case SKL_TKN_U8_CFG_BPS: |
| fmt->bps = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_PATH_MEM_PGS: |
| config->mem_pages = tkn_val; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid token config: %d\n", tkn); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_fill_pipe_tkn(struct device *dev, |
| struct skl_pipe *pipe, u32 tkn, |
| u32 tkn_val) |
| { |
| |
| switch (tkn) { |
| case SKL_TKN_U32_PIPE_CONN_TYPE: |
| pipe->conn_type = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_PIPE_PRIORITY: |
| pipe->pipe_priority = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_PIPE_MEM_PGS: |
| pipe->memory_pages = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_PMODE: |
| pipe->lp_mode = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_PIPE_DIRECTION: |
| pipe->direction = tkn_val; |
| break; |
| |
| case SKL_TKN_U32_NUM_CONFIGS: |
| pipe->nr_cfgs = tkn_val; |
| break; |
| |
| default: |
| dev_err(dev, "Token not handled %d\n", tkn); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Add pipeline by parsing the relevant tokens |
| * Return an existing pipe if the pipe already exists. |
| */ |
| static int skl_tplg_add_pipe(struct device *dev, |
| struct skl_module_cfg *mconfig, struct skl_dev *skl, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem) |
| { |
| struct skl_pipeline *ppl; |
| struct skl_pipe *pipe; |
| struct skl_pipe_params *params; |
| |
| list_for_each_entry(ppl, &skl->ppl_list, node) { |
| if (ppl->pipe->ppl_id == tkn_elem->value) { |
| mconfig->pipe = ppl->pipe; |
| return -EEXIST; |
| } |
| } |
| |
| ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL); |
| if (!ppl) |
| return -ENOMEM; |
| |
| pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL); |
| if (!pipe) |
| return -ENOMEM; |
| |
| params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| pipe->p_params = params; |
| pipe->ppl_id = tkn_elem->value; |
| INIT_LIST_HEAD(&pipe->w_list); |
| |
| ppl->pipe = pipe; |
| list_add(&ppl->node, &skl->ppl_list); |
| |
| mconfig->pipe = pipe; |
| mconfig->pipe->state = SKL_PIPE_INVALID; |
| |
| return 0; |
| } |
| |
| static int skl_tplg_get_uuid(struct device *dev, guid_t *guid, |
| struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) |
| { |
| if (uuid_tkn->token == SKL_TKN_UUID) { |
| import_guid(guid, uuid_tkn->uuid); |
| return 0; |
| } |
| |
| dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token); |
| |
| return -EINVAL; |
| } |
| |
| static int skl_tplg_fill_pin(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_module_pin *m_pin, |
| int pin_index) |
| { |
| int ret; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_U32_PIN_MOD_ID: |
| m_pin[pin_index].id.module_id = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_PIN_INST_ID: |
| m_pin[pin_index].id.instance_id = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_UUID: |
| ret = skl_tplg_get_uuid(dev, &m_pin[pin_index].id.mod_uuid, |
| (struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| default: |
| dev_err(dev, "%d Not a pin token\n", tkn_elem->token); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Parse for pin config specific tokens to fill up the |
| * module private data |
| */ |
| static int skl_tplg_fill_pins_info(struct device *dev, |
| struct skl_module_cfg *mconfig, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| int dir, int pin_count) |
| { |
| int ret; |
| struct skl_module_pin *m_pin; |
| |
| switch (dir) { |
| case SKL_DIR_IN: |
| m_pin = mconfig->m_in_pin; |
| break; |
| |
| case SKL_DIR_OUT: |
| m_pin = mconfig->m_out_pin; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid direction value\n"); |
| return -EINVAL; |
| } |
| |
| ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count); |
| if (ret < 0) |
| return ret; |
| |
| m_pin[pin_count].in_use = false; |
| m_pin[pin_count].pin_state = SKL_PIN_UNBIND; |
| |
| return 0; |
| } |
| |
| /* |
| * Fill up input/output module config format based |
| * on the direction |
| */ |
| static int skl_tplg_fill_fmt(struct device *dev, |
| struct skl_module_fmt *dst_fmt, |
| u32 tkn, u32 value) |
| { |
| switch (tkn) { |
| case SKL_TKN_U32_FMT_CH: |
| dst_fmt->channels = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_FREQ: |
| dst_fmt->s_freq = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_BIT_DEPTH: |
| dst_fmt->bit_depth = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: |
| dst_fmt->valid_bit_depth = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_CH_CONFIG: |
| dst_fmt->ch_cfg = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_INTERLEAVE: |
| dst_fmt->interleaving_style = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: |
| dst_fmt->sample_type = value; |
| break; |
| |
| case SKL_TKN_U32_FMT_CH_MAP: |
| dst_fmt->ch_map = value; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid token %d\n", tkn); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_widget_fill_fmt(struct device *dev, |
| struct skl_module_iface *fmt, |
| u32 tkn, u32 val, u32 dir, int fmt_idx) |
| { |
| struct skl_module_fmt *dst_fmt; |
| |
| if (!fmt) |
| return -EINVAL; |
| |
| switch (dir) { |
| case SKL_DIR_IN: |
| dst_fmt = &fmt->inputs[fmt_idx].fmt; |
| break; |
| |
| case SKL_DIR_OUT: |
| dst_fmt = &fmt->outputs[fmt_idx].fmt; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid direction: %d\n", dir); |
| return -EINVAL; |
| } |
| |
| return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val); |
| } |
| |
| static void skl_tplg_fill_pin_dynamic_val( |
| struct skl_module_pin *mpin, u32 pin_count, u32 value) |
| { |
| int i; |
| |
| for (i = 0; i < pin_count; i++) |
| mpin[i].is_dynamic = value; |
| } |
| |
| /* |
| * Resource table in the manifest has pin specific resources |
| * like pin and pin buffer size |
| */ |
| static int skl_tplg_manifest_pin_res_tkn(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_module_res *res, int pin_idx, int dir) |
| { |
| struct skl_module_pin_resources *m_pin; |
| |
| switch (dir) { |
| case SKL_DIR_IN: |
| m_pin = &res->input[pin_idx]; |
| break; |
| |
| case SKL_DIR_OUT: |
| m_pin = &res->output[pin_idx]; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid pin direction: %d\n", dir); |
| return -EINVAL; |
| } |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_MM_U32_RES_PIN_ID: |
| m_pin->pin_index = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_PIN_BUF: |
| m_pin->buf_size = tkn_elem->value; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid token: %d\n", tkn_elem->token); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Fill module specific resources from the manifest's resource |
| * table like CPS, DMA size, mem_pages. |
| */ |
| static int skl_tplg_fill_res_tkn(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_module_res *res, |
| int pin_idx, int dir) |
| { |
| int ret, tkn_count = 0; |
| |
| if (!res) |
| return -EINVAL; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_MM_U32_DMA_SIZE: |
| res->dma_buffer_size = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_CPC: |
| res->cpc = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_MEM_PAGES: |
| res->is_pages = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_OBS: |
| res->obs = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_IBS: |
| res->ibs = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_RES_PIN_ID: |
| case SKL_TKN_MM_U32_PIN_BUF: |
| ret = skl_tplg_manifest_pin_res_tkn(dev, tkn_elem, res, |
| pin_idx, dir); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case SKL_TKN_MM_U32_CPS: |
| case SKL_TKN_U32_MAX_MCPS: |
| /* ignore unused tokens */ |
| break; |
| |
| default: |
| dev_err(dev, "Not a res type token: %d", tkn_elem->token); |
| return -EINVAL; |
| |
| } |
| tkn_count++; |
| |
| return tkn_count; |
| } |
| |
| /* |
| * Parse tokens to fill up the module private data |
| */ |
| static int skl_tplg_get_token(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_dev *skl, struct skl_module_cfg *mconfig) |
| { |
| int tkn_count = 0; |
| int ret; |
| static int is_pipe_exists; |
| static int pin_index, dir, conf_idx; |
| struct skl_module_iface *iface = NULL; |
| struct skl_module_res *res = NULL; |
| int res_idx = mconfig->res_idx; |
| int fmt_idx = mconfig->fmt_idx; |
| |
| /* |
| * If the manifest structure contains no modules, fill all |
| * the module data to 0th index. |
| * res_idx and fmt_idx are default set to 0. |
| */ |
| if (skl->nr_modules == 0) { |
| res = &mconfig->module->resources[res_idx]; |
| iface = &mconfig->module->formats[fmt_idx]; |
| } |
| |
| if (tkn_elem->token > SKL_TKN_MAX) |
| return -EINVAL; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_U8_IN_QUEUE_COUNT: |
| mconfig->module->max_input_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: |
| mconfig->module->max_output_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_DYN_IN_PIN: |
| if (!mconfig->m_in_pin) |
| mconfig->m_in_pin = |
| devm_kcalloc(dev, MAX_IN_QUEUE, |
| sizeof(*mconfig->m_in_pin), |
| GFP_KERNEL); |
| if (!mconfig->m_in_pin) |
| return -ENOMEM; |
| |
| skl_tplg_fill_pin_dynamic_val(mconfig->m_in_pin, MAX_IN_QUEUE, |
| tkn_elem->value); |
| break; |
| |
| case SKL_TKN_U8_DYN_OUT_PIN: |
| if (!mconfig->m_out_pin) |
| mconfig->m_out_pin = |
| devm_kcalloc(dev, MAX_IN_QUEUE, |
| sizeof(*mconfig->m_in_pin), |
| GFP_KERNEL); |
| if (!mconfig->m_out_pin) |
| return -ENOMEM; |
| |
| skl_tplg_fill_pin_dynamic_val(mconfig->m_out_pin, MAX_OUT_QUEUE, |
| tkn_elem->value); |
| break; |
| |
| case SKL_TKN_U8_TIME_SLOT: |
| mconfig->time_slot = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_CORE_ID: |
| mconfig->core_id = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_MOD_TYPE: |
| mconfig->m_type = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_DEV_TYPE: |
| mconfig->dev_type = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_HW_CONN_TYPE: |
| mconfig->hw_conn_type = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U16_MOD_INST_ID: |
| mconfig->id.instance_id = |
| tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_MEM_PAGES: |
| case SKL_TKN_U32_MAX_MCPS: |
| case SKL_TKN_U32_OBS: |
| case SKL_TKN_U32_IBS: |
| ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_index, dir); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| case SKL_TKN_U32_VBUS_ID: |
| mconfig->vbus_id = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_PARAMS_FIXUP: |
| mconfig->params_fixup = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_CONVERTER: |
| mconfig->converter = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_D0I3_CAPS: |
| mconfig->d0i3_caps = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_PIPE_ID: |
| ret = skl_tplg_add_pipe(dev, |
| mconfig, skl, tkn_elem); |
| |
| if (ret < 0) { |
| if (ret == -EEXIST) { |
| is_pipe_exists = 1; |
| break; |
| } |
| return is_pipe_exists; |
| } |
| |
| break; |
| |
| case SKL_TKN_U32_PIPE_CONFIG_ID: |
| conf_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_PIPE_CONN_TYPE: |
| case SKL_TKN_U32_PIPE_PRIORITY: |
| case SKL_TKN_U32_PIPE_MEM_PGS: |
| case SKL_TKN_U32_PMODE: |
| case SKL_TKN_U32_PIPE_DIRECTION: |
| case SKL_TKN_U32_NUM_CONFIGS: |
| if (is_pipe_exists) { |
| ret = skl_tplg_fill_pipe_tkn(dev, mconfig->pipe, |
| tkn_elem->token, tkn_elem->value); |
| if (ret < 0) |
| return ret; |
| } |
| |
| break; |
| |
| case SKL_TKN_U32_PATH_MEM_PGS: |
| case SKL_TKN_U32_CFG_FREQ: |
| case SKL_TKN_U8_CFG_CHAN: |
| case SKL_TKN_U8_CFG_BPS: |
| if (mconfig->pipe->nr_cfgs) { |
| ret = skl_tplg_fill_pipe_cfg(dev, mconfig->pipe, |
| tkn_elem->token, tkn_elem->value, |
| conf_idx, dir); |
| if (ret < 0) |
| return ret; |
| } |
| break; |
| |
| case SKL_TKN_CFG_MOD_RES_ID: |
| mconfig->mod_cfg[conf_idx].res_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_CFG_MOD_FMT_ID: |
| mconfig->mod_cfg[conf_idx].fmt_idx = tkn_elem->value; |
| break; |
| |
| /* |
| * SKL_TKN_U32_DIR_PIN_COUNT token has the value for both |
| * direction and the pin count. The first four bits represent |
| * direction and next four the pin count. |
| */ |
| case SKL_TKN_U32_DIR_PIN_COUNT: |
| dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK; |
| pin_index = (tkn_elem->value & |
| SKL_PIN_COUNT_MASK) >> 4; |
| |
| break; |
| |
| case SKL_TKN_U32_FMT_CH: |
| case SKL_TKN_U32_FMT_FREQ: |
| case SKL_TKN_U32_FMT_BIT_DEPTH: |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: |
| case SKL_TKN_U32_FMT_CH_CONFIG: |
| case SKL_TKN_U32_FMT_INTERLEAVE: |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: |
| case SKL_TKN_U32_FMT_CH_MAP: |
| ret = skl_tplg_widget_fill_fmt(dev, iface, tkn_elem->token, |
| tkn_elem->value, dir, pin_index); |
| |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| case SKL_TKN_U32_PIN_MOD_ID: |
| case SKL_TKN_U32_PIN_INST_ID: |
| case SKL_TKN_UUID: |
| ret = skl_tplg_fill_pins_info(dev, |
| mconfig, tkn_elem, dir, |
| pin_index); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| case SKL_TKN_U32_FMT_CFG_IDX: |
| if (tkn_elem->value > SKL_MAX_PARAMS_TYPES) |
| return -EINVAL; |
| |
| mconfig->fmt_cfg_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_CAPS_SIZE: |
| mconfig->formats_config[mconfig->fmt_cfg_idx].caps_size = |
| tkn_elem->value; |
| |
| break; |
| |
| case SKL_TKN_U32_CAPS_SET_PARAMS: |
| mconfig->formats_config[mconfig->fmt_cfg_idx].set_params = |
| tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_CAPS_PARAMS_ID: |
| mconfig->formats_config[mconfig->fmt_cfg_idx].param_id = |
| tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_PROC_DOMAIN: |
| mconfig->domain = |
| tkn_elem->value; |
| |
| break; |
| |
| case SKL_TKN_U32_DMA_BUF_SIZE: |
| mconfig->dma_buffer_size = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_IN_PIN_TYPE: |
| case SKL_TKN_U8_OUT_PIN_TYPE: |
| case SKL_TKN_U8_CONN_TYPE: |
| break; |
| |
| default: |
| dev_err(dev, "Token %d not handled\n", |
| tkn_elem->token); |
| return -EINVAL; |
| } |
| |
| tkn_count++; |
| |
| return tkn_count; |
| } |
| |
| /* |
| * Parse the vendor array for specific tokens to construct |
| * module private data |
| */ |
| static int skl_tplg_get_tokens(struct device *dev, |
| char *pvt_data, struct skl_dev *skl, |
| struct skl_module_cfg *mconfig, int block_size) |
| { |
| struct snd_soc_tplg_vendor_array *array; |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; |
| int tkn_count = 0, ret; |
| int off = 0, tuple_size = 0; |
| bool is_module_guid = true; |
| |
| if (block_size <= 0) |
| return -EINVAL; |
| |
| while (tuple_size < block_size) { |
| array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off); |
| |
| off += array->size; |
| |
| switch (array->type) { |
| case SND_SOC_TPLG_TUPLE_TYPE_STRING: |
| dev_warn(dev, "no string tokens expected for skl tplg\n"); |
| continue; |
| |
| case SND_SOC_TPLG_TUPLE_TYPE_UUID: |
| if (is_module_guid) { |
| ret = skl_tplg_get_uuid(dev, (guid_t *)mconfig->guid, |
| array->uuid); |
| is_module_guid = false; |
| } else { |
| ret = skl_tplg_get_token(dev, array->value, skl, |
| mconfig); |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| tuple_size += sizeof(*array->uuid); |
| |
| continue; |
| |
| default: |
| tkn_elem = array->value; |
| tkn_count = 0; |
| break; |
| } |
| |
| while (tkn_count <= (array->num_elems - 1)) { |
| ret = skl_tplg_get_token(dev, tkn_elem, |
| skl, mconfig); |
| |
| if (ret < 0) |
| return ret; |
| |
| tkn_count = tkn_count + ret; |
| tkn_elem++; |
| } |
| |
| tuple_size += tkn_count * sizeof(*tkn_elem); |
| } |
| |
| return off; |
| } |
| |
| /* |
| * Every data block is preceded by a descriptor to read the number |
| * of data blocks, they type of the block and it's size |
| */ |
| static int skl_tplg_get_desc_blocks(struct device *dev, |
| struct snd_soc_tplg_vendor_array *array) |
| { |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; |
| |
| tkn_elem = array->value; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_U8_NUM_BLOCKS: |
| case SKL_TKN_U8_BLOCK_TYPE: |
| case SKL_TKN_U16_BLOCK_SIZE: |
| return tkn_elem->value; |
| |
| default: |
| dev_err(dev, "Invalid descriptor token %d\n", tkn_elem->token); |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* Functions to parse private data from configuration file format v4 */ |
| |
| /* |
| * Add pipeline from topology binary into driver pipeline list |
| * |
| * If already added we return that instance |
| * Otherwise we create a new instance and add into driver list |
| */ |
| static int skl_tplg_add_pipe_v4(struct device *dev, |
| struct skl_module_cfg *mconfig, struct skl_dev *skl, |
| struct skl_dfw_v4_pipe *dfw_pipe) |
| { |
| struct skl_pipeline *ppl; |
| struct skl_pipe *pipe; |
| struct skl_pipe_params *params; |
| |
| list_for_each_entry(ppl, &skl->ppl_list, node) { |
| if (ppl->pipe->ppl_id == dfw_pipe->pipe_id) { |
| mconfig->pipe = ppl->pipe; |
| return 0; |
| } |
| } |
| |
| ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL); |
| if (!ppl) |
| return -ENOMEM; |
| |
| pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL); |
| if (!pipe) |
| return -ENOMEM; |
| |
| params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| pipe->ppl_id = dfw_pipe->pipe_id; |
| pipe->memory_pages = dfw_pipe->memory_pages; |
| pipe->pipe_priority = dfw_pipe->pipe_priority; |
| pipe->conn_type = dfw_pipe->conn_type; |
| pipe->state = SKL_PIPE_INVALID; |
| pipe->p_params = params; |
| INIT_LIST_HEAD(&pipe->w_list); |
| |
| ppl->pipe = pipe; |
| list_add(&ppl->node, &skl->ppl_list); |
| |
| mconfig->pipe = pipe; |
| |
| return 0; |
| } |
| |
| static void skl_fill_module_pin_info_v4(struct skl_dfw_v4_module_pin *dfw_pin, |
| struct skl_module_pin *m_pin, |
| bool is_dynamic, int max_pin) |
| { |
| int i; |
| |
| for (i = 0; i < max_pin; i++) { |
| m_pin[i].id.module_id = dfw_pin[i].module_id; |
| m_pin[i].id.instance_id = dfw_pin[i].instance_id; |
| m_pin[i].in_use = false; |
| m_pin[i].is_dynamic = is_dynamic; |
| m_pin[i].pin_state = SKL_PIN_UNBIND; |
| } |
| } |
| |
| static void skl_tplg_fill_fmt_v4(struct skl_module_pin_fmt *dst_fmt, |
| struct skl_dfw_v4_module_fmt *src_fmt, |
| int pins) |
| { |
| int i; |
| |
| for (i = 0; i < pins; i++) { |
| dst_fmt[i].fmt.channels = src_fmt[i].channels; |
| dst_fmt[i].fmt.s_freq = src_fmt[i].freq; |
| dst_fmt[i].fmt.bit_depth = src_fmt[i].bit_depth; |
| dst_fmt[i].fmt.valid_bit_depth = src_fmt[i].valid_bit_depth; |
| dst_fmt[i].fmt.ch_cfg = src_fmt[i].ch_cfg; |
| dst_fmt[i].fmt.ch_map = src_fmt[i].ch_map; |
| dst_fmt[i].fmt.interleaving_style = |
| src_fmt[i].interleaving_style; |
| dst_fmt[i].fmt.sample_type = src_fmt[i].sample_type; |
| } |
| } |
| |
| static int skl_tplg_get_pvt_data_v4(struct snd_soc_tplg_dapm_widget *tplg_w, |
| struct skl_dev *skl, struct device *dev, |
| struct skl_module_cfg *mconfig) |
| { |
| struct skl_dfw_v4_module *dfw = |
| (struct skl_dfw_v4_module *)tplg_w->priv.data; |
| int ret; |
| int idx = mconfig->fmt_cfg_idx; |
| |
| dev_dbg(dev, "Parsing Skylake v4 widget topology data\n"); |
| |
| ret = guid_parse(dfw->uuid, (guid_t *)mconfig->guid); |
| if (ret) |
| return ret; |
| mconfig->id.module_id = -1; |
| mconfig->id.instance_id = dfw->instance_id; |
| mconfig->module->resources[0].cpc = dfw->max_mcps / 1000; |
| mconfig->module->resources[0].ibs = dfw->ibs; |
| mconfig->module->resources[0].obs = dfw->obs; |
| mconfig->core_id = dfw->core_id; |
| mconfig->module->max_input_pins = dfw->max_in_queue; |
| mconfig->module->max_output_pins = dfw->max_out_queue; |
| mconfig->module->loadable = dfw->is_loadable; |
| skl_tplg_fill_fmt_v4(mconfig->module->formats[0].inputs, dfw->in_fmt, |
| MAX_IN_QUEUE); |
| skl_tplg_fill_fmt_v4(mconfig->module->formats[0].outputs, dfw->out_fmt, |
| MAX_OUT_QUEUE); |
| |
| mconfig->params_fixup = dfw->params_fixup; |
| mconfig->converter = dfw->converter; |
| mconfig->m_type = dfw->module_type; |
| mconfig->vbus_id = dfw->vbus_id; |
| mconfig->module->resources[0].is_pages = dfw->mem_pages; |
| |
| ret = skl_tplg_add_pipe_v4(dev, mconfig, skl, &dfw->pipe); |
| if (ret) |
| return ret; |
| |
| mconfig->dev_type = dfw->dev_type; |
| mconfig->hw_conn_type = dfw->hw_conn_type; |
| mconfig->time_slot = dfw->time_slot; |
| mconfig->formats_config[idx].caps_size = dfw->caps.caps_size; |
| |
| mconfig->m_in_pin = devm_kcalloc(dev, |
| MAX_IN_QUEUE, sizeof(*mconfig->m_in_pin), |
| GFP_KERNEL); |
| if (!mconfig->m_in_pin) |
| return -ENOMEM; |
| |
| mconfig->m_out_pin = devm_kcalloc(dev, |
| MAX_OUT_QUEUE, sizeof(*mconfig->m_out_pin), |
| GFP_KERNEL); |
| if (!mconfig->m_out_pin) |
| return -ENOMEM; |
| |
| skl_fill_module_pin_info_v4(dfw->in_pin, mconfig->m_in_pin, |
| dfw->is_dynamic_in_pin, |
| mconfig->module->max_input_pins); |
| skl_fill_module_pin_info_v4(dfw->out_pin, mconfig->m_out_pin, |
| dfw->is_dynamic_out_pin, |
| mconfig->module->max_output_pins); |
| |
| if (mconfig->formats_config[idx].caps_size) { |
| mconfig->formats_config[idx].set_params = dfw->caps.set_params; |
| mconfig->formats_config[idx].param_id = dfw->caps.param_id; |
| mconfig->formats_config[idx].caps = |
| devm_kzalloc(dev, mconfig->formats_config[idx].caps_size, |
| GFP_KERNEL); |
| if (!mconfig->formats_config[idx].caps) |
| return -ENOMEM; |
| memcpy(mconfig->formats_config[idx].caps, dfw->caps.caps, |
| dfw->caps.caps_size); |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_get_caps_data(struct device *dev, char *data, |
| struct skl_module_cfg *mconfig) |
| { |
| int idx = mconfig->fmt_cfg_idx; |
| |
| if (mconfig->formats_config[idx].caps_size > 0) { |
| mconfig->formats_config[idx].caps = |
| devm_kzalloc(dev, mconfig->formats_config[idx].caps_size, |
| GFP_KERNEL); |
| if (!mconfig->formats_config[idx].caps) |
| return -ENOMEM; |
| memcpy(mconfig->formats_config[idx].caps, data, |
| mconfig->formats_config[idx].caps_size); |
| } |
| |
| return mconfig->formats_config[idx].caps_size; |
| } |
| |
| /* |
| * Parse the private data for the token and corresponding value. |
| * The private data can have multiple data blocks. So, a data block |
| * is preceded by a descriptor for number of blocks and a descriptor |
| * for the type and size of the suceeding data block. |
| */ |
| static int skl_tplg_get_pvt_data(struct snd_soc_tplg_dapm_widget *tplg_w, |
| struct skl_dev *skl, struct device *dev, |
| struct skl_module_cfg *mconfig) |
| { |
| struct snd_soc_tplg_vendor_array *array; |
| int num_blocks, block_size, block_type, off = 0; |
| char *data; |
| int ret; |
| |
| /* |
| * v4 configuration files have a valid UUID at the start of |
| * the widget's private data. |
| */ |
| if (uuid_is_valid((char *)tplg_w->priv.data)) |
| return skl_tplg_get_pvt_data_v4(tplg_w, skl, dev, mconfig); |
| |
| /* Read the NUM_DATA_BLOCKS descriptor */ |
| array = (struct snd_soc_tplg_vendor_array *)tplg_w->priv.data; |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| if (ret < 0) |
| return ret; |
| num_blocks = ret; |
| |
| off += array->size; |
| /* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */ |
| while (num_blocks > 0) { |
| array = (struct snd_soc_tplg_vendor_array *) |
| (tplg_w->priv.data + off); |
| |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| |
| if (ret < 0) |
| return ret; |
| block_type = ret; |
| off += array->size; |
| |
| array = (struct snd_soc_tplg_vendor_array *) |
| (tplg_w->priv.data + off); |
| |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| |
| if (ret < 0) |
| return ret; |
| block_size = ret; |
| off += array->size; |
| |
| array = (struct snd_soc_tplg_vendor_array *) |
| (tplg_w->priv.data + off); |
| |
| data = (tplg_w->priv.data + off); |
| |
| if (block_type == SKL_TYPE_TUPLE) { |
| ret = skl_tplg_get_tokens(dev, data, |
| skl, mconfig, block_size); |
| } else { |
| ret = skl_tplg_get_caps_data(dev, data, mconfig); |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| --num_blocks; |
| off += ret; |
| } |
| |
| return 0; |
| } |
| |
| static void skl_clear_pin_config(struct snd_soc_component *component, |
| struct snd_soc_dapm_widget *w) |
| { |
| int i; |
| struct skl_module_cfg *mconfig; |
| struct skl_pipe *pipe; |
| |
| if (!strncmp(w->dapm->component->name, component->name, |
| strlen(component->name))) { |
| mconfig = w->priv; |
| pipe = mconfig->pipe; |
| for (i = 0; i < mconfig->module->max_input_pins; i++) { |
| mconfig->m_in_pin[i].in_use = false; |
| mconfig->m_in_pin[i].pin_state = SKL_PIN_UNBIND; |
| } |
| for (i = 0; i < mconfig->module->max_output_pins; i++) { |
| mconfig->m_out_pin[i].in_use = false; |
| mconfig->m_out_pin[i].pin_state = SKL_PIN_UNBIND; |
| } |
| pipe->state = SKL_PIPE_INVALID; |
| mconfig->m_state = SKL_MODULE_UNINIT; |
| } |
| } |
| |
| void skl_cleanup_resources(struct skl_dev *skl) |
| { |
| struct snd_soc_component *soc_component = skl->component; |
| struct snd_soc_dapm_widget *w; |
| struct snd_soc_card *card; |
| |
| if (soc_component == NULL) |
| return; |
| |
| card = soc_component->card; |
| if (!card || !card->instantiated) |
| return; |
| |
| list_for_each_entry(w, &card->widgets, list) { |
| if (is_skl_dsp_widget_type(w, skl->dev) && w->priv != NULL) |
| skl_clear_pin_config(soc_component, w); |
| } |
| |
| skl_clear_module_cnt(skl->dsp); |
| } |
| |
| /* |
| * Topology core widget load callback |
| * |
| * This is used to save the private data for each widget which gives |
| * information to the driver about module and pipeline parameters which DSP |
| * FW expects like ids, resource values, formats etc |
| */ |
| static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, int index, |
| struct snd_soc_dapm_widget *w, |
| struct snd_soc_tplg_dapm_widget *tplg_w) |
| { |
| int ret; |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); |
| struct skl_dev *skl = bus_to_skl(bus); |
| struct skl_module_cfg *mconfig; |
| |
| if (!tplg_w->priv.size) |
| goto bind_event; |
| |
| mconfig = devm_kzalloc(bus->dev, sizeof(*mconfig), GFP_KERNEL); |
| |
| if (!mconfig) |
| return -ENOMEM; |
| |
| if (skl->nr_modules == 0) { |
| mconfig->module = devm_kzalloc(bus->dev, |
| sizeof(*mconfig->module), GFP_KERNEL); |
| if (!mconfig->module) |
| return -ENOMEM; |
| } |
| |
| w->priv = mconfig; |
| |
| /* |
| * module binary can be loaded later, so set it to query when |
| * module is load for a use case |
| */ |
| mconfig->id.module_id = -1; |
| |
| /* To provide backward compatibility, set default as SKL_PARAM_INIT */ |
| mconfig->fmt_cfg_idx = SKL_PARAM_INIT; |
| |
| /* Parse private data for tuples */ |
| ret = skl_tplg_get_pvt_data(tplg_w, skl, bus->dev, mconfig); |
| if (ret < 0) |
| return ret; |
| |
| skl_debug_init_module(skl->debugfs, w, mconfig); |
| |
| bind_event: |
| if (tplg_w->event_type == 0) { |
| dev_dbg(bus->dev, "ASoC: No event handler required\n"); |
| return 0; |
| } |
| |
| ret = snd_soc_tplg_widget_bind_event(w, skl_tplg_widget_ops, |
| ARRAY_SIZE(skl_tplg_widget_ops), |
| tplg_w->event_type); |
| |
| if (ret) { |
| dev_err(bus->dev, "%s: No matching event handlers found for %d\n", |
| __func__, tplg_w->event_type); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_init_algo_data(struct device *dev, struct soc_bytes_ext *be, |
| struct snd_soc_tplg_bytes_control *bc) |
| { |
| struct skl_algo_data *ac; |
| struct skl_dfw_algo_data *dfw_ac = |
| (struct skl_dfw_algo_data *)bc->priv.data; |
| |
| ac = devm_kzalloc(dev, sizeof(*ac), GFP_KERNEL); |
| if (!ac) |
| return -ENOMEM; |
| |
| /* Fill private data */ |
| ac->max = dfw_ac->max; |
| ac->param_id = dfw_ac->param_id; |
| ac->set_params = dfw_ac->set_params; |
| ac->size = dfw_ac->max; |
| |
| if (ac->max) { |
| ac->params = devm_kzalloc(dev, ac->max, GFP_KERNEL); |
| if (!ac->params) |
| return -ENOMEM; |
| |
| memcpy(ac->params, dfw_ac->params, ac->max); |
| } |
| |
| be->dobj.private = ac; |
| return 0; |
| } |
| |
| static int skl_init_enum_data(struct device *dev, struct soc_enum *se, |
| struct snd_soc_tplg_enum_control *ec) |
| { |
| |
| void *data; |
| |
| if (ec->priv.size) { |
| data = devm_kzalloc(dev, sizeof(ec->priv.size), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| memcpy(data, ec->priv.data, ec->priv.size); |
| se->dobj.private = data; |
| } |
| |
| return 0; |
| |
| } |
| |
| static int skl_tplg_control_load(struct snd_soc_component *cmpnt, |
| int index, |
| struct snd_kcontrol_new *kctl, |
| struct snd_soc_tplg_ctl_hdr *hdr) |
| { |
| struct soc_bytes_ext *sb; |
| struct snd_soc_tplg_bytes_control *tplg_bc; |
| struct snd_soc_tplg_enum_control *tplg_ec; |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); |
| struct soc_enum *se; |
| |
| switch (hdr->ops.info) { |
| case SND_SOC_TPLG_CTL_BYTES: |
| tplg_bc = container_of(hdr, |
| struct snd_soc_tplg_bytes_control, hdr); |
| if (kctl->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { |
| sb = (struct soc_bytes_ext *)kctl->private_value; |
| if (tplg_bc->priv.size) |
| return skl_init_algo_data( |
| bus->dev, sb, tplg_bc); |
| } |
| break; |
| |
| case SND_SOC_TPLG_CTL_ENUM: |
| tplg_ec = container_of(hdr, |
| struct snd_soc_tplg_enum_control, hdr); |
| if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) { |
| se = (struct soc_enum *)kctl->private_value; |
| if (tplg_ec->priv.size) |
| skl_init_enum_data(bus->dev, se, tplg_ec); |
| } |
| |
| /* |
| * now that the control initializations are done, remove |
| * write permission for the DMIC configuration enums to |
| * avoid conflicts between NHLT settings and user interaction |
| */ |
| |
| if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC) |
| kctl->access = SNDRV_CTL_ELEM_ACCESS_READ; |
| |
| break; |
| |
| default: |
| dev_dbg(bus->dev, "Control load not supported %d:%d:%d\n", |
| hdr->ops.get, hdr->ops.put, hdr->ops.info); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_fill_str_mfest_tkn(struct device *dev, |
| struct snd_soc_tplg_vendor_string_elem *str_elem, |
| struct skl_dev *skl) |
| { |
| int tkn_count = 0; |
| static int ref_count; |
| |
| switch (str_elem->token) { |
| case SKL_TKN_STR_LIB_NAME: |
| if (ref_count > skl->lib_count - 1) { |
| ref_count = 0; |
| return -EINVAL; |
| } |
| |
| strncpy(skl->lib_info[ref_count].name, |
| str_elem->string, |
| ARRAY_SIZE(skl->lib_info[ref_count].name)); |
| ref_count++; |
| break; |
| |
| default: |
| dev_err(dev, "Not a string token %d\n", str_elem->token); |
| break; |
| } |
| tkn_count++; |
| |
| return tkn_count; |
| } |
| |
| static int skl_tplg_get_str_tkn(struct device *dev, |
| struct snd_soc_tplg_vendor_array *array, |
| struct skl_dev *skl) |
| { |
| int tkn_count = 0, ret; |
| struct snd_soc_tplg_vendor_string_elem *str_elem; |
| |
| str_elem = (struct snd_soc_tplg_vendor_string_elem *)array->value; |
| while (tkn_count < array->num_elems) { |
| ret = skl_tplg_fill_str_mfest_tkn(dev, str_elem, skl); |
| str_elem++; |
| |
| if (ret < 0) |
| return ret; |
| |
| tkn_count = tkn_count + ret; |
| } |
| |
| return tkn_count; |
| } |
| |
| static int skl_tplg_manifest_fill_fmt(struct device *dev, |
| struct skl_module_iface *fmt, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| u32 dir, int fmt_idx) |
| { |
| struct skl_module_pin_fmt *dst_fmt; |
| struct skl_module_fmt *mod_fmt; |
| int ret; |
| |
| if (!fmt) |
| return -EINVAL; |
| |
| switch (dir) { |
| case SKL_DIR_IN: |
| dst_fmt = &fmt->inputs[fmt_idx]; |
| break; |
| |
| case SKL_DIR_OUT: |
| dst_fmt = &fmt->outputs[fmt_idx]; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid direction: %d\n", dir); |
| return -EINVAL; |
| } |
| |
| mod_fmt = &dst_fmt->fmt; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_MM_U32_INTF_PIN_ID: |
| dst_fmt->id = tkn_elem->value; |
| break; |
| |
| default: |
| ret = skl_tplg_fill_fmt(dev, mod_fmt, tkn_elem->token, |
| tkn_elem->value); |
| if (ret < 0) |
| return ret; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_fill_mod_info(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_module *mod) |
| { |
| |
| if (!mod) |
| return -EINVAL; |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_U8_IN_PIN_TYPE: |
| mod->input_pin_type = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_OUT_PIN_TYPE: |
| mod->output_pin_type = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_IN_QUEUE_COUNT: |
| mod->max_input_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: |
| mod->max_output_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U8_NUM_RES: |
| mod->nr_resources = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U8_NUM_INTF: |
| mod->nr_interfaces = tkn_elem->value; |
| break; |
| |
| default: |
| dev_err(dev, "Invalid mod info token %d", tkn_elem->token); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int skl_tplg_get_int_tkn(struct device *dev, |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, |
| struct skl_dev *skl) |
| { |
| int tkn_count = 0, ret; |
| static int mod_idx, res_val_idx, intf_val_idx, dir, pin_idx; |
| struct skl_module_res *res = NULL; |
| struct skl_module_iface *fmt = NULL; |
| struct skl_module *mod = NULL; |
| static struct skl_astate_param *astate_table; |
| static int astate_cfg_idx, count; |
| int i; |
| size_t size; |
| |
| if (skl->modules) { |
| mod = skl->modules[mod_idx]; |
| res = &mod->resources[res_val_idx]; |
| fmt = &mod->formats[intf_val_idx]; |
| } |
| |
| switch (tkn_elem->token) { |
| case SKL_TKN_U32_LIB_COUNT: |
| skl->lib_count = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_NUM_MOD: |
| skl->nr_modules = tkn_elem->value; |
| skl->modules = devm_kcalloc(dev, skl->nr_modules, |
| sizeof(*skl->modules), GFP_KERNEL); |
| if (!skl->modules) |
| return -ENOMEM; |
| |
| for (i = 0; i < skl->nr_modules; i++) { |
| skl->modules[i] = devm_kzalloc(dev, |
| sizeof(struct skl_module), GFP_KERNEL); |
| if (!skl->modules[i]) |
| return -ENOMEM; |
| } |
| break; |
| |
| case SKL_TKN_MM_U8_MOD_IDX: |
| mod_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_ASTATE_COUNT: |
| if (astate_table != NULL) { |
| dev_err(dev, "More than one entry for A-State count"); |
| return -EINVAL; |
| } |
| |
| if (tkn_elem->value > SKL_MAX_ASTATE_CFG) { |
| dev_err(dev, "Invalid A-State count %d\n", |
| tkn_elem->value); |
| return -EINVAL; |
| } |
| |
| size = struct_size(skl->cfg.astate_cfg, astate_table, |
| tkn_elem->value); |
| skl->cfg.astate_cfg = devm_kzalloc(dev, size, GFP_KERNEL); |
| if (!skl->cfg.astate_cfg) |
| return -ENOMEM; |
| |
| astate_table = skl->cfg.astate_cfg->astate_table; |
| count = skl->cfg.astate_cfg->count = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_ASTATE_IDX: |
| if (tkn_elem->value >= count) { |
| dev_err(dev, "Invalid A-State index %d\n", |
| tkn_elem->value); |
| return -EINVAL; |
| } |
| |
| astate_cfg_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_ASTATE_KCPS: |
| astate_table[astate_cfg_idx].kcps = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_ASTATE_CLK_SRC: |
| astate_table[astate_cfg_idx].clk_src = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U8_IN_PIN_TYPE: |
| case SKL_TKN_U8_OUT_PIN_TYPE: |
| case SKL_TKN_U8_IN_QUEUE_COUNT: |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: |
| case SKL_TKN_MM_U8_NUM_RES: |
| case SKL_TKN_MM_U8_NUM_INTF: |
| ret = skl_tplg_fill_mod_info(dev, tkn_elem, mod); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case SKL_TKN_U32_DIR_PIN_COUNT: |
| dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK; |
| pin_idx = (tkn_elem->value & SKL_PIN_COUNT_MASK) >> 4; |
| break; |
| |
| case SKL_TKN_MM_U32_RES_ID: |
| if (!res) |
| return -EINVAL; |
| |
| res->id = tkn_elem->value; |
| res_val_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_FMT_ID: |
| if (!fmt) |
| return -EINVAL; |
| |
| fmt->fmt_idx = tkn_elem->value; |
| intf_val_idx = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_CPS: |
| case SKL_TKN_MM_U32_DMA_SIZE: |
| case SKL_TKN_MM_U32_CPC: |
| case SKL_TKN_U32_MEM_PAGES: |
| case SKL_TKN_U32_OBS: |
| case SKL_TKN_U32_IBS: |
| case SKL_TKN_MM_U32_RES_PIN_ID: |
| case SKL_TKN_MM_U32_PIN_BUF: |
| ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_idx, dir); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| case SKL_TKN_MM_U32_NUM_IN_FMT: |
| if (!fmt) |
| return -EINVAL; |
| |
| res->nr_input_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_MM_U32_NUM_OUT_FMT: |
| if (!fmt) |
| return -EINVAL; |
| |
| res->nr_output_pins = tkn_elem->value; |
| break; |
| |
| case SKL_TKN_U32_FMT_CH: |
| case SKL_TKN_U32_FMT_FREQ: |
| case SKL_TKN_U32_FMT_BIT_DEPTH: |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: |
| case SKL_TKN_U32_FMT_CH_CONFIG: |
| case SKL_TKN_U32_FMT_INTERLEAVE: |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: |
| case SKL_TKN_U32_FMT_CH_MAP: |
| case SKL_TKN_MM_U32_INTF_PIN_ID: |
| ret = skl_tplg_manifest_fill_fmt(dev, fmt, tkn_elem, |
| dir, pin_idx); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| default: |
| dev_err(dev, "Not a manifest token %d\n", tkn_elem->token); |
| return -EINVAL; |
| } |
| tkn_count++; |
| |
| return tkn_count; |
| } |
| |
| /* |
| * Fill the manifest structure by parsing the tokens based on the |
| * type. |
| */ |
| static int skl_tplg_get_manifest_tkn(struct device *dev, |
| char *pvt_data, struct skl_dev *skl, |
| int block_size) |
| { |
| int tkn_count = 0, ret; |
| int off = 0, tuple_size = 0; |
| u8 uuid_index = 0; |
| struct snd_soc_tplg_vendor_array *array; |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; |
| |
| if (block_size <= 0) |
| return -EINVAL; |
| |
| while (tuple_size < block_size) { |
| array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off); |
| off += array->size; |
| switch (array->type) { |
| case SND_SOC_TPLG_TUPLE_TYPE_STRING: |
| ret = skl_tplg_get_str_tkn(dev, array, skl); |
| |
| if (ret < 0) |
| return ret; |
| tkn_count = ret; |
| |
| tuple_size += tkn_count * |
| sizeof(struct snd_soc_tplg_vendor_string_elem); |
| continue; |
| |
| case SND_SOC_TPLG_TUPLE_TYPE_UUID: |
| if (array->uuid->token != SKL_TKN_UUID) { |
| dev_err(dev, "Not an UUID token: %d\n", |
| array->uuid->token); |
| return -EINVAL; |
| } |
| if (uuid_index >= skl->nr_modules) { |
| dev_err(dev, "Too many UUID tokens\n"); |
| return -EINVAL; |
| } |
| import_guid(&skl->modules[uuid_index++]->uuid, |
| array->uuid->uuid); |
| |
| tuple_size += sizeof(*array->uuid); |
| continue; |
| |
| default: |
| tkn_elem = array->value; |
| tkn_count = 0; |
| break; |
| } |
| |
| while (tkn_count <= array->num_elems - 1) { |
| ret = skl_tplg_get_int_tkn(dev, |
| tkn_elem, skl); |
| if (ret < 0) |
| return ret; |
| |
| tkn_count = tkn_count + ret; |
| tkn_elem++; |
| } |
| tuple_size += (tkn_count * sizeof(*tkn_elem)); |
| tkn_count = 0; |
| } |
| |
| return off; |
| } |
| |
| /* |
| * Parse manifest private data for tokens. The private data block is |
| * preceded by descriptors for type and size of data block. |
| */ |
| static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, |
| struct device *dev, struct skl_dev *skl) |
| { |
| struct snd_soc_tplg_vendor_array *array; |
| int num_blocks, block_size = 0, block_type, off = 0; |
| char *data; |
| int ret; |
| |
| /* Read the NUM_DATA_BLOCKS descriptor */ |
| array = (struct snd_soc_tplg_vendor_array *)manifest->priv.data; |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| if (ret < 0) |
| return ret; |
| num_blocks = ret; |
| |
| off += array->size; |
| /* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */ |
| while (num_blocks > 0) { |
| array = (struct snd_soc_tplg_vendor_array *) |
| (manifest->priv.data + off); |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| |
| if (ret < 0) |
| return ret; |
| block_type = ret; |
| off += array->size; |
| |
| array = (struct snd_soc_tplg_vendor_array *) |
| (manifest->priv.data + off); |
| |
| ret = skl_tplg_get_desc_blocks(dev, array); |
| |
| if (ret < 0) |
| return ret; |
| block_size = ret; |
| off += array->size; |
| |
| array = (struct snd_soc_tplg_vendor_array *) |
| (manifest->priv.data + off); |
| |
| data = (manifest->priv.data + off); |
| |
| if (block_type == SKL_TYPE_TUPLE) { |
| ret = skl_tplg_get_manifest_tkn(dev, data, skl, |
| block_size); |
| |
| if (ret < 0) |
| return ret; |
| |
| --num_blocks; |
| } else { |
| return -EINVAL; |
| } |
| off += ret; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_manifest_load(struct snd_soc_component *cmpnt, int index, |
| struct snd_soc_tplg_manifest *manifest) |
| { |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); |
| struct skl_dev *skl = bus_to_skl(bus); |
| |
| /* proceed only if we have private data defined */ |
| if (manifest->priv.size == 0) |
| return 0; |
| |
| skl_tplg_get_manifest_data(manifest, bus->dev, skl); |
| |
| if (skl->lib_count > SKL_MAX_LIB) { |
| dev_err(bus->dev, "Exceeding max Library count. Got:%d\n", |
| skl->lib_count); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int skl_tplg_complete(struct snd_soc_component *component) |
| { |
| struct snd_soc_dobj *dobj; |
| struct snd_soc_acpi_mach *mach; |
| struct snd_ctl_elem_value *val; |
| int i; |
| |
| val = kmalloc(sizeof(*val), GFP_KERNEL); |
| if (!val) |
| return -ENOMEM; |
| |
| mach = dev_get_platdata(component->card->dev); |
| list_for_each_entry(dobj, &component->dobj_list, list) { |
| struct snd_kcontrol *kcontrol = dobj->control.kcontrol; |
| struct soc_enum *se; |
| char **texts; |
| char chan_text[4]; |
| |
| if (dobj->type != SND_SOC_DOBJ_ENUM || !kcontrol || |
| kcontrol->put != skl_tplg_multi_config_set_dmic) |
| continue; |
| |
| se = (struct soc_enum *)kcontrol->private_value; |
| texts = dobj->control.dtexts; |
| sprintf(chan_text, "c%d", mach->mach_params.dmic_num); |
| |
| for (i = 0; i < se->items; i++) { |
| if (strstr(texts[i], chan_text)) { |
| memset(val, 0, sizeof(*val)); |
| val->value.enumerated.item[0] = i; |
| kcontrol->put(kcontrol, val); |
| } |
| } |
| } |
| |
| kfree(val); |
| return 0; |
| } |
| |
| static struct snd_soc_tplg_ops skl_tplg_ops = { |
| .widget_load = skl_tplg_widget_load, |
| .control_load = skl_tplg_control_load, |
| .bytes_ext_ops = skl_tlv_ops, |
| .bytes_ext_ops_count = ARRAY_SIZE(skl_tlv_ops), |
| .io_ops = skl_tplg_kcontrol_ops, |
| .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), |
| .manifest = skl_manifest_load, |
| .dai_load = skl_dai_load, |
| .complete = skl_tplg_complete, |
| }; |
| |
| /* |
| * A pipe can have multiple modules, each of them will be a DAPM widget as |
| * well. While managing a pipeline we need to get the list of all the |
| * widgets in a pipelines, so this helper - skl_tplg_create_pipe_widget_list() |
| * helps to get the SKL type widgets in that pipeline |
| */ |
| static int skl_tplg_create_pipe_widget_list(struct snd_soc_component *component) |
| { |
| struct snd_soc_dapm_widget *w; |
| struct skl_module_cfg *mcfg = NULL; |
| struct skl_pipe_module *p_module = NULL; |
| struct skl_pipe *pipe; |
| |
| list_for_each_entry(w, &component->card->widgets, list) { |
| if (is_skl_dsp_widget_type(w, component->dev) && w->priv) { |
| mcfg = w->priv; |
| pipe = mcfg->pipe; |
| |
| p_module = devm_kzalloc(component->dev, |
| sizeof(*p_module), GFP_KERNEL); |
| if (!p_module) |
| return -ENOMEM; |
| |
| p_module->w = w; |
| list_add_tail(&p_module->node, &pipe->w_list); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void skl_tplg_set_pipe_type(struct skl_dev *skl, struct skl_pipe *pipe) |
| { |
| struct skl_pipe_module *w_module; |
| struct snd_soc_dapm_widget *w; |
| struct skl_module_cfg *mconfig; |
| bool host_found = false, link_found = false; |
| |
| list_for_each_entry(w_module, &pipe->w_list, node) { |
| w = w_module->w; |
| mconfig = w->priv; |
| |
| if (mconfig->dev_type == SKL_DEVICE_HDAHOST) |
| host_found = true; |
| else if (mconfig->dev_type != SKL_DEVICE_NONE) |
| link_found = true; |
| } |
| |
| if (host_found && link_found) |
| pipe->passthru = true; |
| else |
| pipe->passthru = false; |
| } |
| |
| /* |
| * SKL topology init routine |
| */ |
| int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus) |
| { |
| int ret; |
| const struct firmware *fw; |
| struct skl_dev *skl = bus_to_skl(bus); |
| struct skl_pipeline *ppl; |
| |
| ret = request_firmware(&fw, skl->tplg_name, bus->dev); |
| if (ret < 0) { |
| char alt_tplg_name[64]; |
| |
| snprintf(alt_tplg_name, sizeof(alt_tplg_name), "%s-tplg.bin", |
| skl->mach->drv_name); |
| dev_info(bus->dev, "tplg fw %s load failed with %d, trying alternative tplg name %s", |
| skl->tplg_name, ret, alt_tplg_name); |
| |
| ret = request_firmware(&fw, alt_tplg_name, bus->dev); |
| if (!ret) |
| goto component_load; |
| |
| dev_info(bus->dev, "tplg %s failed with %d, falling back to dfw_sst.bin", |
| alt_tplg_name, ret); |
| |
| ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); |
| if (ret < 0) { |
| dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n", |
| "dfw_sst.bin", ret); |
| return ret; |
| } |
| } |
| |
| component_load: |
| ret = snd_soc_tplg_component_load(component, &skl_tplg_ops, fw); |
| if (ret < 0) { |
| dev_err(bus->dev, "tplg component load failed%d\n", ret); |
| goto err; |
| } |
| |
| ret = skl_tplg_create_pipe_widget_list(component); |
| if (ret < 0) { |
| dev_err(bus->dev, "tplg create pipe widget list failed%d\n", |
| ret); |
| goto err; |
| } |
| |
| list_for_each_entry(ppl, &skl->ppl_list, node) |
| skl_tplg_set_pipe_type(skl, ppl->pipe); |
| |
| err: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| void skl_tplg_exit(struct snd_soc_component *component, struct hdac_bus *bus) |
| { |
| struct skl_dev *skl = bus_to_skl(bus); |
| struct skl_pipeline *ppl, *tmp; |
| |
| list_for_each_entry_safe(ppl, tmp, &skl->ppl_list, node) |
| list_del(&ppl->node); |
| |
| /* clean up topology */ |
| snd_soc_tplg_component_remove(component); |
| } |