| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * mchp23k256.c |
| * |
| * Driver for Microchip 23k256 SPI RAM chips |
| * |
| * Copyright © 2016 Andrew Lunn <andrew@lunn.ch> |
| */ |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mutex.h> |
| #include <linux/sched.h> |
| #include <linux/sizes.h> |
| #include <linux/spi/flash.h> |
| #include <linux/spi/spi.h> |
| #include <linux/of_device.h> |
| |
| #define MAX_CMD_SIZE 4 |
| |
| struct mchp23_caps { |
| u8 addr_width; |
| unsigned int size; |
| }; |
| |
| struct mchp23k256_flash { |
| struct spi_device *spi; |
| struct mutex lock; |
| struct mtd_info mtd; |
| const struct mchp23_caps *caps; |
| }; |
| |
| #define MCHP23K256_CMD_WRITE_STATUS 0x01 |
| #define MCHP23K256_CMD_WRITE 0x02 |
| #define MCHP23K256_CMD_READ 0x03 |
| #define MCHP23K256_MODE_SEQ BIT(6) |
| |
| #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd) |
| |
| static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash, |
| unsigned int addr, u8 *cmd) |
| { |
| int i; |
| |
| /* |
| * Address is sent in big endian (MSB first) and we skip |
| * the first entry of the cmd array which contains the cmd |
| * opcode. |
| */ |
| for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8) |
| cmd[i] = addr; |
| } |
| |
| static int mchp23k256_cmdsz(struct mchp23k256_flash *flash) |
| { |
| return 1 + flash->caps->addr_width; |
| } |
| |
| static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const unsigned char *buf) |
| { |
| struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); |
| struct spi_transfer transfer[2] = {}; |
| struct spi_message message; |
| unsigned char command[MAX_CMD_SIZE]; |
| int ret, cmd_len; |
| |
| spi_message_init(&message); |
| |
| cmd_len = mchp23k256_cmdsz(flash); |
| |
| command[0] = MCHP23K256_CMD_WRITE; |
| mchp23k256_addr2cmd(flash, to, command); |
| |
| transfer[0].tx_buf = command; |
| transfer[0].len = cmd_len; |
| spi_message_add_tail(&transfer[0], &message); |
| |
| transfer[1].tx_buf = buf; |
| transfer[1].len = len; |
| spi_message_add_tail(&transfer[1], &message); |
| |
| mutex_lock(&flash->lock); |
| |
| ret = spi_sync(flash->spi, &message); |
| |
| mutex_unlock(&flash->lock); |
| |
| if (ret) |
| return ret; |
| |
| if (retlen && message.actual_length > cmd_len) |
| *retlen += message.actual_length - cmd_len; |
| |
| return 0; |
| } |
| |
| static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, unsigned char *buf) |
| { |
| struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); |
| struct spi_transfer transfer[2] = {}; |
| struct spi_message message; |
| unsigned char command[MAX_CMD_SIZE]; |
| int ret, cmd_len; |
| |
| spi_message_init(&message); |
| |
| cmd_len = mchp23k256_cmdsz(flash); |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| command[0] = MCHP23K256_CMD_READ; |
| mchp23k256_addr2cmd(flash, from, command); |
| |
| transfer[0].tx_buf = command; |
| transfer[0].len = cmd_len; |
| spi_message_add_tail(&transfer[0], &message); |
| |
| transfer[1].rx_buf = buf; |
| transfer[1].len = len; |
| spi_message_add_tail(&transfer[1], &message); |
| |
| mutex_lock(&flash->lock); |
| |
| ret = spi_sync(flash->spi, &message); |
| |
| mutex_unlock(&flash->lock); |
| |
| if (ret) |
| return ret; |
| |
| if (retlen && message.actual_length > cmd_len) |
| *retlen += message.actual_length - cmd_len; |
| |
| return 0; |
| } |
| |
| /* |
| * Set the device into sequential mode. This allows read/writes to the |
| * entire SRAM in a single operation |
| */ |
| static int mchp23k256_set_mode(struct spi_device *spi) |
| { |
| struct spi_transfer transfer = {}; |
| struct spi_message message; |
| unsigned char command[2]; |
| |
| spi_message_init(&message); |
| |
| command[0] = MCHP23K256_CMD_WRITE_STATUS; |
| command[1] = MCHP23K256_MODE_SEQ; |
| |
| transfer.tx_buf = command; |
| transfer.len = sizeof(command); |
| spi_message_add_tail(&transfer, &message); |
| |
| return spi_sync(spi, &message); |
| } |
| |
| static const struct mchp23_caps mchp23k256_caps = { |
| .size = SZ_32K, |
| .addr_width = 2, |
| }; |
| |
| static const struct mchp23_caps mchp23lcv1024_caps = { |
| .size = SZ_128K, |
| .addr_width = 3, |
| }; |
| |
| static int mchp23k256_probe(struct spi_device *spi) |
| { |
| struct mchp23k256_flash *flash; |
| struct flash_platform_data *data; |
| int err; |
| |
| flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); |
| if (!flash) |
| return -ENOMEM; |
| |
| flash->spi = spi; |
| mutex_init(&flash->lock); |
| spi_set_drvdata(spi, flash); |
| |
| err = mchp23k256_set_mode(spi); |
| if (err) |
| return err; |
| |
| data = dev_get_platdata(&spi->dev); |
| |
| flash->caps = of_device_get_match_data(&spi->dev); |
| if (!flash->caps) |
| flash->caps = &mchp23k256_caps; |
| |
| mtd_set_of_node(&flash->mtd, spi->dev.of_node); |
| flash->mtd.dev.parent = &spi->dev; |
| flash->mtd.type = MTD_RAM; |
| flash->mtd.flags = MTD_CAP_RAM; |
| flash->mtd.writesize = 1; |
| flash->mtd.size = flash->caps->size; |
| flash->mtd._read = mchp23k256_read; |
| flash->mtd._write = mchp23k256_write; |
| |
| err = mtd_device_register(&flash->mtd, data ? data->parts : NULL, |
| data ? data->nr_parts : 0); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static int mchp23k256_remove(struct spi_device *spi) |
| { |
| struct mchp23k256_flash *flash = spi_get_drvdata(spi); |
| |
| WARN_ON(mtd_device_unregister(&flash->mtd)); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mchp23k256_of_table[] = { |
| { |
| .compatible = "microchip,mchp23k256", |
| .data = &mchp23k256_caps, |
| }, |
| { |
| .compatible = "microchip,mchp23lcv1024", |
| .data = &mchp23lcv1024_caps, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, mchp23k256_of_table); |
| |
| static struct spi_driver mchp23k256_driver = { |
| .driver = { |
| .name = "mchp23k256", |
| .of_match_table = of_match_ptr(mchp23k256_of_table), |
| }, |
| .probe = mchp23k256_probe, |
| .remove = mchp23k256_remove, |
| }; |
| |
| module_spi_driver(mchp23k256_driver); |
| |
| MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips"); |
| MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("spi:mchp23k256"); |