arch/powerpc/sysdev/dart_iommu.c - SHIFTPHONES/mainline/linux - Gitiles

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/powerpc/sysdev/dart_iommu.c
  *
  * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
  *                    IBM Corporation
  *
  * Based on pSeries_iommu.c:
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
  * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  *
  * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
  */

 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
 #include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <linux/kmemleak.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
 #include <asm/ppc-pci.h>

 #include "dart.h"

 /* DART table address and size */
 static u32 *dart_tablebase;
 static unsigned long dart_tablesize;

 /* Mapped base address for the dart */
 static unsigned int __iomem *dart;

 /* Dummy val that entries are set to when unused */
 static unsigned int dart_emptyval;

 static struct iommu_table iommu_table_dart;
 static int iommu_table_dart_inited;
 static int dart_dirty;
 static int dart_is_u4;

 #define DART_U4_BYPASS_BASE	0x8000000000ull

 #define DBG(...)

 static DEFINE_SPINLOCK(invalidate_lock);

 static inline void dart_tlb_invalidate_all(void)
 {
 	unsigned long l = 0;
 	unsigned int reg, inv_bit;
 	unsigned long limit;
 	unsigned long flags;

 	spin_lock_irqsave(&invalidate_lock, flags);

 	DBG("dart: flush\n");

 	/* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
 	 * control register and wait for it to clear.
 	 *
 	 * Gotcha: Sometimes, the DART won't detect that the bit gets
 	 * set. If so, clear it and set it again.
 	 */

 	limit = 0;

 	inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
 retry:
 	l = 0;
 	reg = DART_IN(DART_CNTL);
 	reg |= inv_bit;
 	DART_OUT(DART_CNTL, reg);

 	while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
 		l++;
 	if (l == (1L << limit)) {
 		if (limit < 4) {
 			limit++;
 			reg = DART_IN(DART_CNTL);
 			reg &= ~inv_bit;
 			DART_OUT(DART_CNTL, reg);
 			goto retry;
 		} else
 			panic("DART: TLB did not flush after waiting a long "
 			      "time. Buggy U3 ?");
 	}

 	spin_unlock_irqrestore(&invalidate_lock, flags);
 }

 static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
 {
 	unsigned int reg;
 	unsigned int l, limit;
 	unsigned long flags;

 	spin_lock_irqsave(&invalidate_lock, flags);

 	reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
 		(bus_rpn & DART_CNTL_U4_IONE_MASK);
 	DART_OUT(DART_CNTL, reg);

 	limit = 0;
 wait_more:
 	l = 0;
 	while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
 		rmb();
 		l++;
 	}

 	if (l == (1L << limit)) {
 		if (limit < 4) {
 			limit++;
 			goto wait_more;
 		} else
 			panic("DART: TLB did not flush after waiting a long "
 			      "time. Buggy U4 ?");
 	}

 	spin_unlock_irqrestore(&invalidate_lock, flags);
 }

 static void dart_cache_sync(unsigned int *base, unsigned int count)
 {
 	/*
 	 * We add 1 to the number of entries to flush, following a
 	 * comment in Darwin indicating that the memory controller
 	 * can prefetch unmapped memory under some circumstances.
 	 */
 	unsigned long start = (unsigned long)base;
 	unsigned long end = start + (count + 1) * sizeof(unsigned int);
 	unsigned int tmp;

 	/* Perform a standard cache flush */
 	flush_dcache_range(start, end);

 	/*
 	 * Perform the sequence described in the CPC925 manual to
 	 * ensure all the data gets to a point the cache incoherent
 	 * DART hardware will see.
 	 */
 	asm volatile(" sync;"
 		     " isync;"
 		     " dcbf 0,%1;"
 		     " sync;"
 		     " isync;"
 		     " lwz %0,0(%1);"
 		     " isync" : "=r" (tmp) : "r" (end) : "memory");
 }

 static void dart_flush(struct iommu_table *tbl)
 {
 	mb();
 	if (dart_dirty) {
 		dart_tlb_invalidate_all();
 		dart_dirty = 0;
 	}
 }

 static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
 		       enum dma_data_direction direction,
 		       unsigned long attrs)
 {
 	unsigned int *dp, *orig_dp;
 	unsigned int rpn;
 	long l;

 	DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);

 	orig_dp = dp = ((unsigned int*)tbl->it_base) + index;

 	/* On U3, all memory is contiguous, so we can move this
 	 * out of the loop.
 	 */
 	l = npages;
 	while (l--) {
 		rpn = __pa(uaddr) >> DART_PAGE_SHIFT;

 		*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);

 		uaddr += DART_PAGE_SIZE;
 	}
 	dart_cache_sync(orig_dp, npages);

 	if (dart_is_u4) {
 		rpn = index;
 		while (npages--)
 			dart_tlb_invalidate_one(rpn++);
 	} else {
 		dart_dirty = 1;
 	}
 	return 0;
 }


 static void dart_free(struct iommu_table *tbl, long index, long npages)
 {
 	unsigned int *dp, *orig_dp;
 	long orig_npages = npages;

 	/* We don't worry about flushing the TLB cache. The only drawback of
 	 * not doing it is that we won't catch buggy device drivers doing
 	 * bad DMAs, but then no 32-bit architecture ever does either.
 	 */

 	DBG("dart: free at: %lx, %lx\n", index, npages);

 	orig_dp = dp  = ((unsigned int *)tbl->it_base) + index;

 	while (npages--)
 		*(dp++) = dart_emptyval;

 	dart_cache_sync(orig_dp, orig_npages);
 }

 static void __init allocate_dart(void)
 {
 	unsigned long tmp;

 	/* 512 pages (2MB) is max DART tablesize. */
 	dart_tablesize = 1UL << 21;

 	/*
 	 * 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
 	 * will blow up an entire large page anyway in the kernel mapping.
 	 */
 	dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
 					MEMBLOCK_LOW_LIMIT, SZ_2G,
 					NUMA_NO_NODE);
 	if (!dart_tablebase)
 		panic("Failed to allocate 16MB below 2GB for DART table\n");

 	/* There is no point scanning the DART space for leaks*/
 	kmemleak_no_scan((void *)dart_tablebase);

 	/* Allocate a spare page to map all invalid DART pages. We need to do
 	 * that to work around what looks like a problem with the HT bridge
 	 * prefetching into invalid pages and corrupting data
 	 */
 	tmp = memblock_phys_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 	if (!tmp)
 		panic("DART: table allocation failed\n");

 	dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
 					 DARTMAP_RPNMASK);

 	printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase);
 }

 static int __init dart_init(struct device_node *dart_node)
 {
 	unsigned int i;
 	unsigned long base, size;
 	struct resource r;

 	/* IOMMU disabled by the user ? bail out */
 	if (iommu_is_off)
 		return -ENODEV;

 	/*
 	 * Only use the DART if the machine has more than 1GB of RAM
 	 * or if requested with iommu=on on cmdline.
 	 *
 	 * 1GB of RAM is picked as limit because some default devices
 	 * (i.e. Airport Extreme) have 30 bit address range limits.
 	 */

 	if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
 		return -ENODEV;

 	/* Get DART registers */
 	if (of_address_to_resource(dart_node, 0, &r))
 		panic("DART: can't get register base ! ");

 	/* Map in DART registers */
 	dart = ioremap(r.start, resource_size(&r));
 	if (dart == NULL)
 		panic("DART: Cannot map registers!");

 	/* Allocate the DART and dummy page */
 	allocate_dart();

 	/* Fill initial table */
 	for (i = 0; i < dart_tablesize/4; i++)
 		dart_tablebase[i] = dart_emptyval;

 	/* Push to memory */
 	dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));

 	/* Initialize DART with table base and enable it. */
 	base = ((unsigned long)dart_tablebase) >> DART_PAGE_SHIFT;
 	size = dart_tablesize >> DART_PAGE_SHIFT;
 	if (dart_is_u4) {
 		size &= DART_SIZE_U4_SIZE_MASK;
 		DART_OUT(DART_BASE_U4, base);
 		DART_OUT(DART_SIZE_U4, size);
 		DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
 	} else {
 		size &= DART_CNTL_U3_SIZE_MASK;
 		DART_OUT(DART_CNTL,
 			 DART_CNTL_U3_ENABLE |
 			 (base << DART_CNTL_U3_BASE_SHIFT) |
 			 (size << DART_CNTL_U3_SIZE_SHIFT));
 	}

 	/* Invalidate DART to get rid of possible stale TLBs */
 	dart_tlb_invalidate_all();

 	printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
 	       dart_is_u4 ? "U4" : "U3");

 	return 0;
 }

 static struct iommu_table_ops iommu_dart_ops = {
 	.set = dart_build,
 	.clear = dart_free,
 	.flush = dart_flush,
 };

 static void iommu_table_dart_setup(void)
 {
 	iommu_table_dart.it_busno = 0;
 	iommu_table_dart.it_offset = 0;
 	/* it_size is in number of entries */
 	iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
 	iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K;

 	/* Initialize the common IOMMU code */
 	iommu_table_dart.it_base = (unsigned long)dart_tablebase;
 	iommu_table_dart.it_index = 0;
 	iommu_table_dart.it_blocksize = 1;
 	iommu_table_dart.it_ops = &iommu_dart_ops;
 	if (!iommu_init_table(&iommu_table_dart, -1, 0, 0))
 		panic("Failed to initialize iommu table");

 	/* Reserve the last page of the DART to avoid possible prefetch
 	 * past the DART mapped area
 	 */
 	set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
 }

 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
 {
 	if (!iommu_table_dart_inited) {
 		iommu_table_dart_inited = 1;
 		iommu_table_dart_setup();
 	}
 }

 static bool dart_device_on_pcie(struct device *dev)
 {
 	struct device_node *np = of_node_get(dev->of_node);

 	while(np) {
 		if (of_device_is_compatible(np, "U4-pcie") ||
 		    of_device_is_compatible(np, "u4-pcie")) {
 			of_node_put(np);
 			return true;
 		}
 		np = of_get_next_parent(np);
 	}
 	return false;
 }

 static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 {
 	if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
 		dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
 	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }

 static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
 {
 	return dart_is_u4 &&
 		dart_device_on_pcie(&dev->dev) &&
 		mask >= DMA_BIT_MASK(40);
 }

 void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
 {
 	struct device_node *dn;

 	/* Find the DART in the device-tree */
 	dn = of_find_compatible_node(NULL, "dart", "u3-dart");
 	if (dn == NULL) {
 		dn = of_find_compatible_node(NULL, "dart", "u4-dart");
 		if (dn == NULL)
 			return;	/* use default direct_dma_ops */
 		dart_is_u4 = 1;
 	}

 	/* Initialize the DART HW */
 	if (dart_init(dn) != 0)
 		return;

 	/*
 	 * U4 supports a DART bypass, we use it for 64-bit capable devices to
 	 * improve performance.  However, that only works for devices connected
 	 * to the U4 own PCIe interface, not bridged through hypertransport.
 	 * We need the device to support at least 40 bits of addresses.
 	 */
 	controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
 	controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
 	controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;

 	/* Setup pci_dma ops */
 	set_pci_dma_ops(&dma_iommu_ops);
 }

 #ifdef CONFIG_PM
 static void iommu_dart_restore(void)
 {
 	dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
 	dart_tlb_invalidate_all();
 }

 static int __init iommu_init_late_dart(void)
 {
 	if (!dart_tablebase)
 		return 0;

 	ppc_md.iommu_restore = iommu_dart_restore;

 	return 0;
 }

 late_initcall(iommu_init_late_dart);
 #endif /* CONFIG_PM */
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* arch/powerpc/sysdev/dart_iommu.c
	*
	* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
	* Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	* IBM Corporation
	*
	* Based on pSeries_iommu.c:
	* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
	* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
	*
	* Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
	*/

	#include <linux/init.h>
	#include <linux/types.h>
	#include <linux/mm.h>
	#include <linux/spinlock.h>
	#include <linux/string.h>
	#include <linux/pci.h>
	#include <linux/dma-mapping.h>
	#include <linux/vmalloc.h>
	#include <linux/suspend.h>
	#include <linux/memblock.h>
	#include <linux/gfp.h>
	#include <linux/kmemleak.h>
	#include <asm/io.h>
	#include <asm/prom.h>
	#include <asm/iommu.h>
	#include <asm/pci-bridge.h>
	#include <asm/machdep.h>
	#include <asm/cacheflush.h>
	#include <asm/ppc-pci.h>

	#include "dart.h"

	/* DART table address and size */
	static u32 *dart_tablebase;
	static unsigned long dart_tablesize;

	/* Mapped base address for the dart */
	static unsigned int __iomem *dart;

	/* Dummy val that entries are set to when unused */
	static unsigned int dart_emptyval;

	static struct iommu_table iommu_table_dart;
	static int iommu_table_dart_inited;
	static int dart_dirty;
	static int dart_is_u4;

	#define DART_U4_BYPASS_BASE 0x8000000000ull

	#define DBG(...)

	static DEFINE_SPINLOCK(invalidate_lock);

	static inline void dart_tlb_invalidate_all(void)
	{
	unsigned long l = 0;
	unsigned int reg, inv_bit;
	unsigned long limit;
	unsigned long flags;

	spin_lock_irqsave(&invalidate_lock, flags);

	DBG("dart: flush\n");

	/* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
	* control register and wait for it to clear.
	*
	* Gotcha: Sometimes, the DART won't detect that the bit gets
	* set. If so, clear it and set it again.
	*/

	limit = 0;

	inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
	retry:
	l = 0;
	reg = DART_IN(DART_CNTL);
	reg \|= inv_bit;
	DART_OUT(DART_CNTL, reg);

	while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
	l++;
	if (l == (1L << limit)) {
	if (limit < 4) {
	limit++;
	reg = DART_IN(DART_CNTL);
	reg &= ~inv_bit;
	DART_OUT(DART_CNTL, reg);
	goto retry;
	} else
	panic("DART: TLB did not flush after waiting a long "
	"time. Buggy U3 ?");
	}

	spin_unlock_irqrestore(&invalidate_lock, flags);
	}

	static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
	{
	unsigned int reg;
	unsigned int l, limit;
	unsigned long flags;

	spin_lock_irqsave(&invalidate_lock, flags);

	reg = DART_CNTL_U4_ENABLE \| DART_CNTL_U4_IONE \|
	(bus_rpn & DART_CNTL_U4_IONE_MASK);
	DART_OUT(DART_CNTL, reg);

	limit = 0;
	wait_more:
	l = 0;
	while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
	rmb();
	l++;
	}

	if (l == (1L << limit)) {
	if (limit < 4) {
	limit++;
	goto wait_more;
	} else
	panic("DART: TLB did not flush after waiting a long "
	"time. Buggy U4 ?");
	}

	spin_unlock_irqrestore(&invalidate_lock, flags);
	}

	static void dart_cache_sync(unsigned int *base, unsigned int count)
	{
	/*
	* We add 1 to the number of entries to flush, following a
	* comment in Darwin indicating that the memory controller
	* can prefetch unmapped memory under some circumstances.
	*/
	unsigned long start = (unsigned long)base;
	unsigned long end = start + (count + 1) * sizeof(unsigned int);
	unsigned int tmp;

	/* Perform a standard cache flush */
	flush_dcache_range(start, end);

	/*
	* Perform the sequence described in the CPC925 manual to
	* ensure all the data gets to a point the cache incoherent
	* DART hardware will see.
	*/
	asm volatile(" sync;"
	" isync;"
	" dcbf 0,%1;"
	" sync;"
	" isync;"
	" lwz %0,0(%1);"
	" isync" : "=r" (tmp) : "r" (end) : "memory");
	}

	static void dart_flush(struct iommu_table *tbl)
	{
	mb();
	if (dart_dirty) {
	dart_tlb_invalidate_all();
	dart_dirty = 0;
	}
	}

	static int dart_build(struct iommu_table *tbl, long index,
	long npages, unsigned long uaddr,
	enum dma_data_direction direction,
	unsigned long attrs)
	{
	unsigned int dp, orig_dp;
	unsigned int rpn;
	long l;

	DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);

	orig_dp = dp = ((unsigned int*)tbl->it_base) + index;

	/* On U3, all memory is contiguous, so we can move this
	* out of the loop.
	*/
	l = npages;
	while (l--) {
	rpn = __pa(uaddr) >> DART_PAGE_SHIFT;

	*(dp++) = DARTMAP_VALID \| (rpn & DARTMAP_RPNMASK);

	uaddr += DART_PAGE_SIZE;
	}
	dart_cache_sync(orig_dp, npages);

	if (dart_is_u4) {
	rpn = index;
	while (npages--)
	dart_tlb_invalidate_one(rpn++);
	} else {
	dart_dirty = 1;
	}
	return 0;
	}


	static void dart_free(struct iommu_table *tbl, long index, long npages)
	{
	unsigned int dp, orig_dp;
	long orig_npages = npages;

	/* We don't worry about flushing the TLB cache. The only drawback of
	* not doing it is that we won't catch buggy device drivers doing
	* bad DMAs, but then no 32-bit architecture ever does either.
	*/

	DBG("dart: free at: %lx, %lx\n", index, npages);

	orig_dp = dp = ((unsigned int *)tbl->it_base) + index;

	while (npages--)
	*(dp++) = dart_emptyval;

	dart_cache_sync(orig_dp, orig_npages);
	}

	static void __init allocate_dart(void)
	{
	unsigned long tmp;

	/* 512 pages (2MB) is max DART tablesize. */
	dart_tablesize = 1UL << 21;

	/*
	* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
	* will blow up an entire large page anyway in the kernel mapping.
	*/
	dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
	MEMBLOCK_LOW_LIMIT, SZ_2G,
	NUMA_NO_NODE);
	if (!dart_tablebase)
	panic("Failed to allocate 16MB below 2GB for DART table\n");

	/* There is no point scanning the DART space for leaks*/
	kmemleak_no_scan((void *)dart_tablebase);

	/* Allocate a spare page to map all invalid DART pages. We need to do
	* that to work around what looks like a problem with the HT bridge
	* prefetching into invalid pages and corrupting data
	*/
	tmp = memblock_phys_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
	if (!tmp)
	panic("DART: table allocation failed\n");

	dart_emptyval = DARTMAP_VALID \| ((tmp >> DART_PAGE_SHIFT) &
	DARTMAP_RPNMASK);

	printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase);
	}

	static int __init dart_init(struct device_node *dart_node)
	{
	unsigned int i;
	unsigned long base, size;
	struct resource r;

	/* IOMMU disabled by the user ? bail out */
	if (iommu_is_off)
	return -ENODEV;

	/*
	* Only use the DART if the machine has more than 1GB of RAM
	* or if requested with iommu=on on cmdline.
	*
	* 1GB of RAM is picked as limit because some default devices
	* (i.e. Airport Extreme) have 30 bit address range limits.
	*/

	if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
	return -ENODEV;

	/* Get DART registers */
	if (of_address_to_resource(dart_node, 0, &r))
	panic("DART: can't get register base ! ");

	/* Map in DART registers */
	dart = ioremap(r.start, resource_size(&r));
	if (dart == NULL)
	panic("DART: Cannot map registers!");

	/* Allocate the DART and dummy page */
	allocate_dart();

	/* Fill initial table */
	for (i = 0; i < dart_tablesize/4; i++)
	dart_tablebase[i] = dart_emptyval;

	/* Push to memory */
	dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));

	/* Initialize DART with table base and enable it. */
	base = ((unsigned long)dart_tablebase) >> DART_PAGE_SHIFT;
	size = dart_tablesize >> DART_PAGE_SHIFT;
	if (dart_is_u4) {
	size &= DART_SIZE_U4_SIZE_MASK;
	DART_OUT(DART_BASE_U4, base);
	DART_OUT(DART_SIZE_U4, size);
	DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
	} else {
	size &= DART_CNTL_U3_SIZE_MASK;
	DART_OUT(DART_CNTL,
	DART_CNTL_U3_ENABLE \|
	(base << DART_CNTL_U3_BASE_SHIFT) \|
	(size << DART_CNTL_U3_SIZE_SHIFT));
	}

	/* Invalidate DART to get rid of possible stale TLBs */
	dart_tlb_invalidate_all();

	printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
	dart_is_u4 ? "U4" : "U3");

	return 0;
	}

	static struct iommu_table_ops iommu_dart_ops = {
	.set = dart_build,
	.clear = dart_free,
	.flush = dart_flush,
	};

	static void iommu_table_dart_setup(void)
	{
	iommu_table_dart.it_busno = 0;
	iommu_table_dart.it_offset = 0;
	/* it_size is in number of entries */
	iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
	iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K;

	/* Initialize the common IOMMU code */
	iommu_table_dart.it_base = (unsigned long)dart_tablebase;
	iommu_table_dart.it_index = 0;
	iommu_table_dart.it_blocksize = 1;
	iommu_table_dart.it_ops = &iommu_dart_ops;
	if (!iommu_init_table(&iommu_table_dart, -1, 0, 0))
	panic("Failed to initialize iommu table");

	/* Reserve the last page of the DART to avoid possible prefetch
	* past the DART mapped area
	*/
	set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
	}

	static void pci_dma_bus_setup_dart(struct pci_bus *bus)
	{
	if (!iommu_table_dart_inited) {
	iommu_table_dart_inited = 1;
	iommu_table_dart_setup();
	}
	}

	static bool dart_device_on_pcie(struct device *dev)
	{
	struct device_node *np = of_node_get(dev->of_node);

	while(np) {
	if (of_device_is_compatible(np, "U4-pcie") \|\|
	of_device_is_compatible(np, "u4-pcie")) {
	of_node_put(np);
	return true;
	}
	np = of_get_next_parent(np);
	}
	return false;
	}

	static void pci_dma_dev_setup_dart(struct pci_dev *dev)
	{
	if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
	dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
	set_iommu_table_base(&dev->dev, &iommu_table_dart);
	}

	static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
	{
	return dart_is_u4 &&
	dart_device_on_pcie(&dev->dev) &&
	mask >= DMA_BIT_MASK(40);
	}

	void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
	{
	struct device_node *dn;

	/* Find the DART in the device-tree */
	dn = of_find_compatible_node(NULL, "dart", "u3-dart");
	if (dn == NULL) {
	dn = of_find_compatible_node(NULL, "dart", "u4-dart");
	if (dn == NULL)
	return; /* use default direct_dma_ops */
	dart_is_u4 = 1;
	}

	/* Initialize the DART HW */
	if (dart_init(dn) != 0)
	return;

	/*
	* U4 supports a DART bypass, we use it for 64-bit capable devices to
	* improve performance. However, that only works for devices connected
	* to the U4 own PCIe interface, not bridged through hypertransport.
	* We need the device to support at least 40 bits of addresses.
	*/
	controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
	controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
	controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;

	/* Setup pci_dma ops */
	set_pci_dma_ops(&dma_iommu_ops);
	}

	#ifdef CONFIG_PM
	static void iommu_dart_restore(void)
	{
	dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
	dart_tlb_invalidate_all();
	}

	static int __init iommu_init_late_dart(void)
	{
	if (!dart_tablebase)
	return 0;

	ppc_md.iommu_restore = iommu_dart_restore;

	return 0;
	}

	late_initcall(iommu_init_late_dart);
	#endif /* CONFIG_PM */