| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright (C) Paul Mackerras 1997. |
| * |
| * Adapted for 64 bit LE PowerPC by Andrew Tauferner |
| */ |
| |
| #include "ppc_asm.h" |
| |
| RELA = 7 |
| RELACOUNT = 0x6ffffff9 |
| |
| .data |
| /* A procedure descriptor used when booting this as a COFF file. |
| * When making COFF, this comes first in the link and we're |
| * linked at 0x500000. |
| */ |
| .globl _zimage_start_opd |
| _zimage_start_opd: |
| .long 0x500000, 0, 0, 0 |
| .text |
| b _zimage_start |
| |
| #ifdef __powerpc64__ |
| .balign 8 |
| p_start: .8byte _start |
| p_etext: .8byte _etext |
| p_bss_start: .8byte __bss_start |
| p_end: .8byte _end |
| |
| p_toc: .8byte .TOC. - p_base |
| p_dyn: .8byte __dynamic_start - p_base |
| p_rela: .8byte __rela_dyn_start - p_base |
| p_prom: .8byte 0 |
| .weak _platform_stack_top |
| p_pstack: .8byte _platform_stack_top |
| #else |
| p_start: .long _start |
| p_etext: .long _etext |
| p_bss_start: .long __bss_start |
| p_end: .long _end |
| |
| .weak _platform_stack_top |
| p_pstack: .long _platform_stack_top |
| #endif |
| |
| .weak _zimage_start |
| _zimage_start: |
| .globl _zimage_start_lib |
| _zimage_start_lib: |
| /* Work out the offset between the address we were linked at |
| and the address where we're running. */ |
| bl .+4 |
| p_base: mflr r10 /* r10 now points to runtime addr of p_base */ |
| #ifndef __powerpc64__ |
| /* grab the link address of the dynamic section in r11 */ |
| addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha |
| lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11) |
| cmpwi r11,0 |
| beq 3f /* if not linked -pie */ |
| /* get the runtime address of the dynamic section in r12 */ |
| .weak __dynamic_start |
| addis r12,r10,(__dynamic_start-p_base)@ha |
| addi r12,r12,(__dynamic_start-p_base)@l |
| subf r11,r11,r12 /* runtime - linktime offset */ |
| |
| /* The dynamic section contains a series of tagged entries. |
| * We need the RELA and RELACOUNT entries. */ |
| li r9,0 |
| li r0,0 |
| 9: lwz r8,0(r12) /* get tag */ |
| cmpwi r8,0 |
| beq 10f /* end of list */ |
| cmpwi r8,RELA |
| bne 11f |
| lwz r9,4(r12) /* get RELA pointer in r9 */ |
| b 12f |
| 11: addis r8,r8,(-RELACOUNT)@ha |
| cmpwi r8,RELACOUNT@l |
| bne 12f |
| lwz r0,4(r12) /* get RELACOUNT value in r0 */ |
| 12: addi r12,r12,8 |
| b 9b |
| |
| /* The relocation section contains a list of relocations. |
| * We now do the R_PPC_RELATIVE ones, which point to words |
| * which need to be initialized with addend + offset. |
| * The R_PPC_RELATIVE ones come first and there are RELACOUNT |
| * of them. */ |
| 10: /* skip relocation if we don't have both */ |
| cmpwi r0,0 |
| beq 3f |
| cmpwi r9,0 |
| beq 3f |
| |
| add r9,r9,r11 /* Relocate RELA pointer */ |
| mtctr r0 |
| 2: lbz r0,4+3(r9) /* ELF32_R_INFO(reloc->r_info) */ |
| cmpwi r0,22 /* R_PPC_RELATIVE */ |
| bne 3f |
| lwz r12,0(r9) /* reloc->r_offset */ |
| lwz r0,8(r9) /* reloc->r_addend */ |
| add r0,r0,r11 |
| stwx r0,r11,r12 |
| addi r9,r9,12 |
| bdnz 2b |
| |
| /* Do a cache flush for our text, in case the loader didn't */ |
| 3: lwz r9,p_start-p_base(r10) /* note: these are relocated now */ |
| lwz r8,p_etext-p_base(r10) |
| 4: dcbf r0,r9 |
| icbi r0,r9 |
| addi r9,r9,0x20 |
| cmplw cr0,r9,r8 |
| blt 4b |
| sync |
| isync |
| |
| /* Clear the BSS */ |
| lwz r9,p_bss_start-p_base(r10) |
| lwz r8,p_end-p_base(r10) |
| li r0,0 |
| 5: stw r0,0(r9) |
| addi r9,r9,4 |
| cmplw cr0,r9,r8 |
| blt 5b |
| |
| /* Possibly set up a custom stack */ |
| lwz r8,p_pstack-p_base(r10) |
| cmpwi r8,0 |
| beq 6f |
| lwz r1,0(r8) |
| li r0,0 |
| stwu r0,-16(r1) /* establish a stack frame */ |
| 6: |
| #else /* __powerpc64__ */ |
| /* Save the prom pointer at p_prom. */ |
| std r5,(p_prom-p_base)(r10) |
| |
| /* Set r2 to the TOC. */ |
| ld r2,(p_toc-p_base)(r10) |
| add r2,r2,r10 |
| |
| /* Grab the link address of the dynamic section in r11. */ |
| ld r11,-32768(r2) |
| cmpwi r11,0 |
| beq 3f /* if not linked -pie then no dynamic section */ |
| |
| ld r11,(p_dyn-p_base)(r10) |
| add r11,r11,r10 |
| ld r9,(p_rela-p_base)(r10) |
| add r9,r9,r10 |
| |
| li r13,0 |
| li r8,0 |
| 9: ld r12,0(r11) /* get tag */ |
| cmpdi r12,0 |
| beq 12f /* end of list */ |
| cmpdi r12,RELA |
| bne 10f |
| ld r13,8(r11) /* get RELA pointer in r13 */ |
| b 11f |
| 10: addis r12,r12,(-RELACOUNT)@ha |
| cmpdi r12,RELACOUNT@l |
| bne 11f |
| ld r8,8(r11) /* get RELACOUNT value in r8 */ |
| 11: addi r11,r11,16 |
| b 9b |
| 12: |
| cmpdi r13,0 /* check we have both RELA and RELACOUNT */ |
| cmpdi cr1,r8,0 |
| beq 3f |
| beq cr1,3f |
| |
| /* Calcuate the runtime offset. */ |
| subf r13,r13,r9 |
| |
| /* Run through the list of relocations and process the |
| * R_PPC64_RELATIVE ones. */ |
| mtctr r8 |
| 13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */ |
| cmpdi r0,22 /* R_PPC64_RELATIVE */ |
| bne 3f |
| ld r12,0(r9) /* reloc->r_offset */ |
| ld r0,16(r9) /* reloc->r_addend */ |
| add r0,r0,r13 |
| stdx r0,r13,r12 |
| addi r9,r9,24 |
| bdnz 13b |
| |
| /* Do a cache flush for our text, in case the loader didn't */ |
| 3: ld r9,p_start-p_base(r10) /* note: these are relocated now */ |
| ld r8,p_etext-p_base(r10) |
| 4: dcbf r0,r9 |
| icbi r0,r9 |
| addi r9,r9,0x20 |
| cmpld cr0,r9,r8 |
| blt 4b |
| sync |
| isync |
| |
| /* Clear the BSS */ |
| ld r9,p_bss_start-p_base(r10) |
| ld r8,p_end-p_base(r10) |
| li r0,0 |
| 5: std r0,0(r9) |
| addi r9,r9,8 |
| cmpld cr0,r9,r8 |
| blt 5b |
| |
| /* Possibly set up a custom stack */ |
| ld r8,p_pstack-p_base(r10) |
| cmpdi r8,0 |
| beq 6f |
| ld r1,0(r8) |
| li r0,0 |
| stdu r0,-112(r1) /* establish a stack frame */ |
| 6: |
| #endif /* __powerpc64__ */ |
| /* Call platform_init() */ |
| bl platform_init |
| |
| /* Call start */ |
| b start |
| |
| #ifdef __powerpc64__ |
| |
| #define PROM_FRAME_SIZE 512 |
| |
| .macro OP_REGS op, width, start, end, base, offset |
| .Lreg=\start |
| .rept (\end - \start + 1) |
| \op .Lreg,\offset+\width*.Lreg(\base) |
| .Lreg=.Lreg+1 |
| .endr |
| .endm |
| |
| #define SAVE_GPRS(start, end, base) OP_REGS std, 8, start, end, base, 0 |
| #define REST_GPRS(start, end, base) OP_REGS ld, 8, start, end, base, 0 |
| #define SAVE_GPR(n, base) SAVE_GPRS(n, n, base) |
| #define REST_GPR(n, base) REST_GPRS(n, n, base) |
| |
| /* prom handles the jump into and return from firmware. The prom args pointer |
| is loaded in r3. */ |
| .globl prom |
| prom: |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ |
| |
| SAVE_GPR(2, r1) |
| SAVE_GPRS(13, 31, r1) |
| mfcr r10 |
| std r10,8*32(r1) |
| mfmsr r10 |
| std r10,8*33(r1) |
| |
| /* remove MSR_LE from msr but keep MSR_SF */ |
| mfmsr r10 |
| rldicr r10,r10,0,62 |
| mtsrr1 r10 |
| |
| /* Load FW address, set LR to label 1, and jump to FW */ |
| bl 0f |
| 0: mflr r10 |
| addi r11,r10,(1f-0b) |
| mtlr r11 |
| |
| ld r10,(p_prom-0b)(r10) |
| mtsrr0 r10 |
| |
| rfid |
| |
| 1: /* Return from OF */ |
| FIXUP_ENDIAN |
| |
| /* Restore registers and return. */ |
| rldicl r1,r1,0,32 |
| |
| /* Restore the MSR (back to 64 bits) */ |
| ld r10,8*(33)(r1) |
| mtmsr r10 |
| isync |
| |
| /* Restore other registers */ |
| REST_GPR(2, r1) |
| REST_GPRS(13, 31, r1) |
| ld r10,8*32(r1) |
| mtcr r10 |
| |
| addi r1,r1,PROM_FRAME_SIZE |
| ld r0,16(r1) |
| mtlr r0 |
| blr |
| #endif |