| // SPDX-License-Identifier: GPL-2.0 |
| #include <dt-bindings/clock/ingenic,jz4770-cgu.h> |
| #include <dt-bindings/clock/ingenic,tcu.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "ingenic,jz4770"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "ingenic,xburst-fpu1.0-mxu1.1"; |
| reg = <0>; |
| |
| clocks = <&cgu JZ4770_CLK_CCLK>; |
| clock-names = "cpu"; |
| }; |
| }; |
| |
| cpuintc: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| intc: interrupt-controller@10001000 { |
| compatible = "ingenic,jz4770-intc"; |
| reg = <0x10001000 0x40>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <2>; |
| }; |
| |
| ext: ext { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| osc32k: osc32k { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| |
| cgu: jz4770-cgu@10000000 { |
| compatible = "ingenic,jz4770-cgu", "simple-mfd"; |
| reg = <0x10000000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10000000 0x100>; |
| |
| clocks = <&ext>, <&osc32k>; |
| clock-names = "ext", "osc32k"; |
| |
| #clock-cells = <1>; |
| |
| otg_phy: usb-phy@3c { |
| compatible = "ingenic,jz4770-phy"; |
| reg = <0x3c 0x10>; |
| |
| clocks = <&cgu JZ4770_CLK_OTG_PHY>; |
| |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| tcu: timer@10002000 { |
| compatible = "ingenic,jz4770-tcu", "simple-mfd"; |
| reg = <0x10002000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10002000 0x1000>; |
| |
| #clock-cells = <1>; |
| |
| clocks = <&cgu JZ4770_CLK_RTC>, |
| <&cgu JZ4770_CLK_EXT>, |
| <&cgu JZ4770_CLK_PCLK>; |
| clock-names = "rtc", "ext", "pclk"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <27 26 25>; |
| |
| watchdog: watchdog@0 { |
| compatible = "ingenic,jz4770-watchdog", |
| "ingenic,jz4740-watchdog"; |
| reg = <0x0 0xc>; |
| |
| clocks = <&tcu TCU_CLK_WDT>; |
| clock-names = "wdt"; |
| }; |
| |
| pwm: pwm@40 { |
| compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm"; |
| reg = <0x40 0x80>; |
| |
| #pwm-cells = <3>; |
| |
| clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, |
| <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, |
| <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, |
| <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; |
| clock-names = "timer0", "timer1", "timer2", "timer3", |
| "timer4", "timer5", "timer6", "timer7"; |
| }; |
| |
| ost: timer@e0 { |
| compatible = "ingenic,jz4770-ost"; |
| reg = <0xe0 0x20>; |
| |
| clocks = <&tcu TCU_CLK_OST>; |
| clock-names = "ost"; |
| |
| interrupts = <15>; |
| }; |
| }; |
| |
| rtc: rtc@10003000 { |
| compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc"; |
| reg = <0x10003000 0x40>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <32>; |
| }; |
| |
| pinctrl: pin-controller@10010000 { |
| compatible = "ingenic,jz4770-pinctrl"; |
| reg = <0x10010000 0x600>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpa: gpio@0 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <0>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 0 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <17>; |
| }; |
| |
| gpb: gpio@1 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <1>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 32 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <16>; |
| }; |
| |
| gpc: gpio@2 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <2>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 64 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <15>; |
| }; |
| |
| gpd: gpio@3 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <3>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 96 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <14>; |
| }; |
| |
| gpe: gpio@4 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <4>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 128 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <13>; |
| }; |
| |
| gpf: gpio@5 { |
| compatible = "ingenic,jz4770-gpio"; |
| reg = <5>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 160 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <12>; |
| }; |
| }; |
| |
| aic: audio-controller@10020000 { |
| compatible = "ingenic,jz4770-i2s"; |
| reg = <0x10020000 0x94>; |
| |
| #sound-dai-cells = <0>; |
| |
| clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>, |
| <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>; |
| clock-names = "aic", "i2s", "ext", "pll half"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <34>; |
| |
| dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| codec: audio-codec@100200a0 { |
| compatible = "ingenic,jz4770-codec"; |
| reg = <0x100200a4 0x8>; |
| |
| #sound-dai-cells = <0>; |
| |
| clocks = <&cgu JZ4770_CLK_AIC>; |
| clock-names = "aic"; |
| }; |
| |
| mmc0: mmc@10021000 { |
| compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; |
| reg = <0x10021000 0x1000>; |
| |
| clocks = <&cgu JZ4770_CLK_MMC0>; |
| clock-names = "mmc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <37>; |
| |
| dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>; |
| dma-names = "rx", "tx"; |
| |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| cap-sdio-irq; |
| |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@10022000 { |
| compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; |
| reg = <0x10022000 0x1000>; |
| |
| clocks = <&cgu JZ4770_CLK_MMC1>; |
| clock-names = "mmc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <36>; |
| |
| dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>; |
| dma-names = "rx", "tx"; |
| |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| cap-sdio-irq; |
| |
| status = "disabled"; |
| }; |
| |
| mmc2: mmc@10023000 { |
| compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; |
| reg = <0x10023000 0x1000>; |
| |
| clocks = <&cgu JZ4770_CLK_MMC2>; |
| clock-names = "mmc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <35>; |
| |
| dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>; |
| dma-names = "rx", "tx"; |
| |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| cap-sdio-irq; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@10030000 { |
| compatible = "ingenic,jz4770-uart"; |
| reg = <0x10030000 0x100>; |
| |
| clocks = <&ext>, <&cgu JZ4770_CLK_UART0>; |
| clock-names = "baud", "module"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <5>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@10031000 { |
| compatible = "ingenic,jz4770-uart"; |
| reg = <0x10031000 0x100>; |
| |
| clocks = <&ext>, <&cgu JZ4770_CLK_UART1>; |
| clock-names = "baud", "module"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| uart2: serial@10032000 { |
| compatible = "ingenic,jz4770-uart"; |
| reg = <0x10032000 0x100>; |
| |
| clocks = <&ext>, <&cgu JZ4770_CLK_UART2>; |
| clock-names = "baud", "module"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <3>; |
| |
| status = "disabled"; |
| }; |
| |
| uart3: serial@10033000 { |
| compatible = "ingenic,jz4770-uart"; |
| reg = <0x10033000 0x100>; |
| |
| clocks = <&ext>, <&cgu JZ4770_CLK_UART3>; |
| clock-names = "baud", "module"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| adc: adc@10070000 { |
| compatible = "ingenic,jz4770-adc"; |
| reg = <0x10070000 0x30>; |
| |
| #io-channel-cells = <1>; |
| |
| clocks = <&cgu JZ4770_CLK_ADC>; |
| clock-names = "adc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <18>; |
| }; |
| |
| gpu: gpu@13040000 { |
| compatible = "vivante,gc"; |
| reg = <0x13040000 0x10000>; |
| |
| clocks = <&cgu JZ4770_CLK_GPU>, |
| <&cgu JZ4770_CLK_GPU>, |
| <&cgu JZ4770_CLK_GPU>; |
| clock-names = "bus", "core", "shader"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <6>; |
| }; |
| |
| lcd: lcd-controller@13050000 { |
| compatible = "ingenic,jz4770-lcd"; |
| reg = <0x13050000 0x130>; /* tbc */ |
| |
| interrupt-parent = <&intc>; |
| interrupts = <31>; |
| |
| clocks = <&cgu JZ4770_CLK_LPCLK_MUX>; |
| clock-names = "lcd_pclk"; |
| }; |
| |
| dmac0: dma-controller@13420000 { |
| compatible = "ingenic,jz4770-dma"; |
| reg = <0x13420000 0xC0>, <0x13420300 0x20>; |
| |
| #dma-cells = <2>; |
| |
| clocks = <&cgu JZ4770_CLK_DMA>; |
| interrupt-parent = <&intc>; |
| interrupts = <24>; |
| }; |
| |
| dmac1: dma-controller@13420100 { |
| compatible = "ingenic,jz4770-dma"; |
| reg = <0x13420100 0xC0>, <0x13420400 0x20>; |
| |
| #dma-cells = <2>; |
| |
| clocks = <&cgu JZ4770_CLK_DMA>; |
| interrupt-parent = <&intc>; |
| interrupts = <23>; |
| }; |
| |
| uhc: usb@13430000 { |
| compatible = "generic-ohci"; |
| reg = <0x13430000 0x1000>; |
| |
| clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>; |
| assigned-clocks = <&cgu JZ4770_CLK_UHC>; |
| assigned-clock-rates = <48000000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <20>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_otg: usb@13440000 { |
| compatible = "ingenic,jz4770-musb"; |
| reg = <0x13440000 0x10000>; |
| |
| clocks = <&cgu JZ4770_CLK_OTG>; |
| clock-names = "udc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <21>; |
| interrupt-names = "mc"; |
| |
| phys = <&otg_phy>; |
| |
| usb-role-switch; |
| }; |
| |
| rom: memory@1fc00000 { |
| compatible = "mtd-rom"; |
| probe-type = "map_rom"; |
| reg = <0x1fc00000 0x2000>; |
| |
| bank-width = <4>; |
| device-width = <1>; |
| }; |
| }; |