| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ |
| %YAML 1.2 |
| --- |
| $id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#" |
| $schema: "http://devicetree.org/meta-schemas/core.yaml#" |
| |
| title: TI J721E PCI Host (PCIe Wrapper) |
| |
| maintainers: |
| - Kishon Vijay Abraham I <kishon@ti.com> |
| |
| allOf: |
| - $ref: "cdns-pcie-host.yaml#" |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: ti,j721e-pcie-host |
| - description: PCIe controller in AM64 |
| items: |
| - const: ti,am64-pcie-host |
| - const: ti,j721e-pcie-host |
| - description: PCIe controller in J7200 |
| items: |
| - const: ti,j7200-pcie-host |
| - const: ti,j721e-pcie-host |
| |
| reg: |
| maxItems: 4 |
| |
| reg-names: |
| items: |
| - const: intd_cfg |
| - const: user_cfg |
| - const: reg |
| - const: cfg |
| |
| ti,syscon-pcie-ctrl: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| items: |
| - items: |
| - description: Phandle to the SYSCON entry |
| - description: pcie_ctrl register offset within SYSCON |
| description: Specifier for configuring PCIe mode and link speed. |
| |
| power-domains: |
| maxItems: 1 |
| |
| clocks: |
| minItems: 1 |
| maxItems: 2 |
| description: |+ |
| clock-specifier to represent input to the PCIe for 1 item. |
| 2nd item if present represents reference clock to the connector. |
| |
| clock-names: |
| minItems: 1 |
| items: |
| - const: fck |
| - const: pcie_refclk |
| |
| dma-coherent: true |
| |
| vendor-id: |
| const: 0x104c |
| |
| device-id: |
| oneOf: |
| - items: |
| - const: 0xb00d |
| - items: |
| - const: 0xb00f |
| - items: |
| - const: 0xb010 |
| |
| msi-map: true |
| |
| required: |
| - compatible |
| - reg |
| - reg-names |
| - ti,syscon-pcie-ctrl |
| - max-link-speed |
| - num-lanes |
| - power-domains |
| - clocks |
| - clock-names |
| - vendor-id |
| - device-id |
| - msi-map |
| - dma-ranges |
| - ranges |
| - reset-gpios |
| - phys |
| - phy-names |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/soc/ti,sci_pm_domain.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| bus { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| pcie0_rc: pcie@2900000 { |
| compatible = "ti,j721e-pcie-host"; |
| reg = <0x00 0x02900000 0x00 0x1000>, |
| <0x00 0x02907000 0x00 0x400>, |
| <0x00 0x0d000000 0x00 0x00800000>, |
| <0x00 0x10000000 0x00 0x00001000>; |
| reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; |
| ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; |
| max-link-speed = <3>; |
| num-lanes = <2>; |
| power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 239 1>; |
| clock-names = "fck"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| bus-range = <0x0 0xf>; |
| vendor-id = <0x104c>; |
| device-id = <0xb00d>; |
| msi-map = <0x0 &gic_its 0x0 0x10000>; |
| dma-coherent; |
| reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; |
| phys = <&serdes0_pcie_link>; |
| phy-names = "pcie-phy"; |
| ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>, |
| <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>; |
| dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; |
| }; |
| }; |