| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Spreadtrum mailbox driver |
| * |
| * Copyright (c) 2020 Spreadtrum Communications Inc. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/mailbox_controller.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| |
| #define SPRD_MBOX_ID 0x0 |
| #define SPRD_MBOX_MSG_LOW 0x4 |
| #define SPRD_MBOX_MSG_HIGH 0x8 |
| #define SPRD_MBOX_TRIGGER 0xc |
| #define SPRD_MBOX_FIFO_RST 0x10 |
| #define SPRD_MBOX_FIFO_STS 0x14 |
| #define SPRD_MBOX_IRQ_STS 0x18 |
| #define SPRD_MBOX_IRQ_MSK 0x1c |
| #define SPRD_MBOX_LOCK 0x20 |
| #define SPRD_MBOX_FIFO_DEPTH 0x24 |
| |
| /* Bit and mask definiation for inbox's SPRD_MBOX_FIFO_STS register */ |
| #define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16) |
| #define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8) |
| #define SPRD_INBOX_FIFO_DELIVER_SHIFT 16 |
| #define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0) |
| |
| /* Bit and mask definiation for SPRD_MBOX_IRQ_STS register */ |
| #define SPRD_MBOX_IRQ_CLR BIT(0) |
| |
| /* Bit and mask definiation for outbox's SPRD_MBOX_FIFO_STS register */ |
| #define SPRD_OUTBOX_FIFO_FULL BIT(2) |
| #define SPRD_OUTBOX_FIFO_WR_SHIFT 16 |
| #define SPRD_OUTBOX_FIFO_RD_SHIFT 24 |
| #define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0) |
| |
| /* Bit and mask definiation for inbox's SPRD_MBOX_IRQ_MSK register */ |
| #define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0) |
| #define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1) |
| #define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2) |
| #define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0) |
| |
| /* Bit and mask definiation for outbox's SPRD_MBOX_IRQ_MSK register */ |
| #define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0) |
| #define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0) |
| |
| #define SPRD_MBOX_CHAN_MAX 8 |
| |
| struct sprd_mbox_priv { |
| struct mbox_controller mbox; |
| struct device *dev; |
| void __iomem *inbox_base; |
| void __iomem *outbox_base; |
| struct clk *clk; |
| u32 outbox_fifo_depth; |
| |
| struct mbox_chan chan[SPRD_MBOX_CHAN_MAX]; |
| }; |
| |
| static struct sprd_mbox_priv *to_sprd_mbox_priv(struct mbox_controller *mbox) |
| { |
| return container_of(mbox, struct sprd_mbox_priv, mbox); |
| } |
| |
| static u32 sprd_mbox_get_fifo_len(struct sprd_mbox_priv *priv, u32 fifo_sts) |
| { |
| u32 wr_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_WR_SHIFT) & |
| SPRD_OUTBOX_FIFO_POS_MASK; |
| u32 rd_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_RD_SHIFT) & |
| SPRD_OUTBOX_FIFO_POS_MASK; |
| u32 fifo_len; |
| |
| /* |
| * If the read pointer is equal with write pointer, which means the fifo |
| * is full or empty. |
| */ |
| if (wr_pos == rd_pos) { |
| if (fifo_sts & SPRD_OUTBOX_FIFO_FULL) |
| fifo_len = priv->outbox_fifo_depth; |
| else |
| fifo_len = 0; |
| } else if (wr_pos > rd_pos) { |
| fifo_len = wr_pos - rd_pos; |
| } else { |
| fifo_len = priv->outbox_fifo_depth - rd_pos + wr_pos; |
| } |
| |
| return fifo_len; |
| } |
| |
| static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data) |
| { |
| struct sprd_mbox_priv *priv = data; |
| struct mbox_chan *chan; |
| u32 fifo_sts, fifo_len, msg[2]; |
| int i, id; |
| |
| fifo_sts = readl(priv->outbox_base + SPRD_MBOX_FIFO_STS); |
| |
| fifo_len = sprd_mbox_get_fifo_len(priv, fifo_sts); |
| if (!fifo_len) { |
| dev_warn_ratelimited(priv->dev, "spurious outbox interrupt\n"); |
| return IRQ_NONE; |
| } |
| |
| for (i = 0; i < fifo_len; i++) { |
| msg[0] = readl(priv->outbox_base + SPRD_MBOX_MSG_LOW); |
| msg[1] = readl(priv->outbox_base + SPRD_MBOX_MSG_HIGH); |
| id = readl(priv->outbox_base + SPRD_MBOX_ID); |
| |
| chan = &priv->chan[id]; |
| mbox_chan_received_data(chan, (void *)msg); |
| |
| /* Trigger to update outbox FIFO pointer */ |
| writel(0x1, priv->outbox_base + SPRD_MBOX_TRIGGER); |
| } |
| |
| /* Clear irq status after reading all message. */ |
| writel(SPRD_MBOX_IRQ_CLR, priv->outbox_base + SPRD_MBOX_IRQ_STS); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data) |
| { |
| struct sprd_mbox_priv *priv = data; |
| struct mbox_chan *chan; |
| u32 fifo_sts, send_sts, busy, id; |
| |
| fifo_sts = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS); |
| |
| /* Get the inbox data delivery status */ |
| send_sts = (fifo_sts & SPRD_INBOX_FIFO_DELIVER_MASK) >> |
| SPRD_INBOX_FIFO_DELIVER_SHIFT; |
| if (!send_sts) { |
| dev_warn_ratelimited(priv->dev, "spurious inbox interrupt\n"); |
| return IRQ_NONE; |
| } |
| |
| while (send_sts) { |
| id = __ffs(send_sts); |
| send_sts &= (send_sts - 1); |
| |
| chan = &priv->chan[id]; |
| |
| /* |
| * Check if the message was fetched by remote traget, if yes, |
| * that means the transmission has been completed. |
| */ |
| busy = fifo_sts & SPRD_INBOX_FIFO_BUSY_MASK; |
| if (!(busy & BIT(id))) |
| mbox_chan_txdone(chan, 0); |
| } |
| |
| /* Clear FIFO delivery and overflow status */ |
| writel(fifo_sts & |
| (SPRD_INBOX_FIFO_DELIVER_MASK | SPRD_INBOX_FIFO_OVERLOW_MASK), |
| priv->inbox_base + SPRD_MBOX_FIFO_RST); |
| |
| /* Clear irq status */ |
| writel(SPRD_MBOX_IRQ_CLR, priv->inbox_base + SPRD_MBOX_IRQ_STS); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sprd_mbox_send_data(struct mbox_chan *chan, void *msg) |
| { |
| struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); |
| unsigned long id = (unsigned long)chan->con_priv; |
| u32 *data = msg; |
| |
| /* Write data into inbox FIFO, and only support 8 bytes every time */ |
| writel(data[0], priv->inbox_base + SPRD_MBOX_MSG_LOW); |
| writel(data[1], priv->inbox_base + SPRD_MBOX_MSG_HIGH); |
| |
| /* Set target core id */ |
| writel(id, priv->inbox_base + SPRD_MBOX_ID); |
| |
| /* Trigger remote request */ |
| writel(0x1, priv->inbox_base + SPRD_MBOX_TRIGGER); |
| |
| return 0; |
| } |
| |
| static int sprd_mbox_flush(struct mbox_chan *chan, unsigned long timeout) |
| { |
| struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); |
| unsigned long id = (unsigned long)chan->con_priv; |
| u32 busy; |
| |
| timeout = jiffies + msecs_to_jiffies(timeout); |
| |
| while (time_before(jiffies, timeout)) { |
| busy = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS) & |
| SPRD_INBOX_FIFO_BUSY_MASK; |
| if (!(busy & BIT(id))) { |
| mbox_chan_txdone(chan, 0); |
| return 0; |
| } |
| |
| udelay(1); |
| } |
| |
| return -ETIME; |
| } |
| |
| static int sprd_mbox_startup(struct mbox_chan *chan) |
| { |
| struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); |
| u32 val; |
| |
| /* Select outbox FIFO mode and reset the outbox FIFO status */ |
| writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST); |
| |
| /* Enable inbox FIFO overflow and delivery interrupt */ |
| val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK); |
| val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ); |
| writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK); |
| |
| /* Enable outbox FIFO not empty interrupt */ |
| val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK); |
| val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ; |
| writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK); |
| |
| return 0; |
| } |
| |
| static void sprd_mbox_shutdown(struct mbox_chan *chan) |
| { |
| struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); |
| |
| /* Disable inbox & outbox interrupt */ |
| writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK); |
| writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK); |
| } |
| |
| static const struct mbox_chan_ops sprd_mbox_ops = { |
| .send_data = sprd_mbox_send_data, |
| .flush = sprd_mbox_flush, |
| .startup = sprd_mbox_startup, |
| .shutdown = sprd_mbox_shutdown, |
| }; |
| |
| static void sprd_mbox_disable(void *data) |
| { |
| struct sprd_mbox_priv *priv = data; |
| |
| clk_disable_unprepare(priv->clk); |
| } |
| |
| static int sprd_mbox_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct sprd_mbox_priv *priv; |
| int ret, inbox_irq, outbox_irq; |
| unsigned long id; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = dev; |
| |
| /* |
| * The Spreadtrum mailbox uses an inbox to send messages to the target |
| * core, and uses an outbox to receive messages from other cores. |
| * |
| * Thus the mailbox controller supplies 2 different register addresses |
| * and IRQ numbers for inbox and outbox. |
| */ |
| priv->inbox_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->inbox_base)) |
| return PTR_ERR(priv->inbox_base); |
| |
| priv->outbox_base = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(priv->outbox_base)) |
| return PTR_ERR(priv->outbox_base); |
| |
| priv->clk = devm_clk_get(dev, "enable"); |
| if (IS_ERR(priv->clk)) { |
| dev_err(dev, "failed to get mailbox clock\n"); |
| return PTR_ERR(priv->clk); |
| } |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(dev, sprd_mbox_disable, priv); |
| if (ret) { |
| dev_err(dev, "failed to add mailbox disable action\n"); |
| return ret; |
| } |
| |
| inbox_irq = platform_get_irq(pdev, 0); |
| if (inbox_irq < 0) |
| return inbox_irq; |
| |
| ret = devm_request_irq(dev, inbox_irq, sprd_mbox_inbox_isr, |
| IRQF_NO_SUSPEND, dev_name(dev), priv); |
| if (ret) { |
| dev_err(dev, "failed to request inbox IRQ: %d\n", ret); |
| return ret; |
| } |
| |
| outbox_irq = platform_get_irq(pdev, 1); |
| if (outbox_irq < 0) |
| return outbox_irq; |
| |
| ret = devm_request_irq(dev, outbox_irq, sprd_mbox_outbox_isr, |
| IRQF_NO_SUSPEND, dev_name(dev), priv); |
| if (ret) { |
| dev_err(dev, "failed to request outbox IRQ: %d\n", ret); |
| return ret; |
| } |
| |
| /* Get the default outbox FIFO depth */ |
| priv->outbox_fifo_depth = |
| readl(priv->outbox_base + SPRD_MBOX_FIFO_DEPTH) + 1; |
| priv->mbox.dev = dev; |
| priv->mbox.chans = &priv->chan[0]; |
| priv->mbox.num_chans = SPRD_MBOX_CHAN_MAX; |
| priv->mbox.ops = &sprd_mbox_ops; |
| priv->mbox.txdone_irq = true; |
| |
| for (id = 0; id < SPRD_MBOX_CHAN_MAX; id++) |
| priv->chan[id].con_priv = (void *)id; |
| |
| ret = devm_mbox_controller_register(dev, &priv->mbox); |
| if (ret) { |
| dev_err(dev, "failed to register mailbox: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sprd_mbox_of_match[] = { |
| { .compatible = "sprd,sc9860-mailbox", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, sprd_mbox_of_match); |
| |
| static struct platform_driver sprd_mbox_driver = { |
| .driver = { |
| .name = "sprd-mailbox", |
| .of_match_table = sprd_mbox_of_match, |
| }, |
| .probe = sprd_mbox_probe, |
| }; |
| module_platform_driver(sprd_mbox_driver); |
| |
| MODULE_AUTHOR("Baolin Wang <baolin.wang@unisoc.com>"); |
| MODULE_DESCRIPTION("Spreadtrum mailbox driver"); |
| MODULE_LICENSE("GPL v2"); |