arch/arm/boot/dts/imx28.dtsi

/*
 * Copyright 2012 Freescale Semiconductor, Inc.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	interrupt-parent = <&icoll>;

	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	apb@80000000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80000000 0x80000>;
		ranges;

		apbh@80000000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x3c900>;
			ranges;

			icoll: interrupt-controller@80000000 {
				compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x80000000 0x2000>;
			};

			hsadc@80002000 {
				reg = <0x80002000 2000>;
				interrupts = <13 87>;
				status = "disabled";
			};

			dma-apbh@80004000 {
				compatible = "fsl,imx28-dma-apbh";
				reg = <0x80004000 2000>;
			};

			perfmon@80006000 {
				reg = <0x80006000 800>;
				interrupts = <27>;
				status = "disabled";
			};

			bch@8000a000 {
				reg = <0x8000a000 2000>;
				interrupts = <41>;
				status = "disabled";
			};

			gpmi@8000c000 {
				reg = <0x8000c000 2000>;
				interrupts = <42 88>;
				status = "disabled";
			};

			ssp0: ssp@80010000 {
				reg = <0x80010000 2000>;
				interrupts = <96 82>;
				status = "disabled";
			};

			ssp1: ssp@80012000 {
				reg = <0x80012000 2000>;
				interrupts = <97 83>;
				status = "disabled";
			};

			ssp2: ssp@80014000 {
				reg = <0x80014000 2000>;
				interrupts = <98 84>;
				status = "disabled";
			};

			ssp3: ssp@80016000 {
				reg = <0x80016000 2000>;
				interrupts = <99 85>;
				status = "disabled";
			};

			pinctrl@80018000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx28-pinctrl";
				reg = <0x80018000 2000>;

				duart_pins_a: duart@0 {
					reg = <0>;
					fsl,pinmux-ids = <0x3102 0x3112>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				mac0_pins_a: mac0@0 {
					reg = <0>;
					fsl,pinmux-ids = <0x4000 0x4010 0x4020
						0x4030 0x4040 0x4060 0x4070
						0x4080 0x4100>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};

				mac1_pins_a: mac1@0 {
					reg = <0>;
					fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
						0x40e1 0x40b1 0x40c1>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};
			};

			digctl@8001c000 {
				reg = <0x8001c000 2000>;
				interrupts = <89>;
				status = "disabled";
			};

			etm@80022000 {
				reg = <0x80022000 2000>;
				status = "disabled";
			};

			dma-apbx@80024000 {
				compatible = "fsl,imx28-dma-apbx";
				reg = <0x80024000 2000>;
			};

			dcp@80028000 {
				reg = <0x80028000 2000>;
				interrupts = <52 53 54>;
				status = "disabled";
			};

			pxp@8002a000 {
				reg = <0x8002a000 2000>;
				interrupts = <39>;
				status = "disabled";
			};

			ocotp@8002c000 {
				reg = <0x8002c000 2000>;
				status = "disabled";
			};

			axi-ahb@8002e000 {
				reg = <0x8002e000 2000>;
				status = "disabled";
			};

			lcdif@80030000 {
				reg = <0x80030000 2000>;
				interrupts = <38 86>;
				status = "disabled";
			};

			can0: can@80032000 {
				reg = <0x80032000 2000>;
				interrupts = <8>;
				status = "disabled";
			};

			can1: can@80034000 {
				reg = <0x80034000 2000>;
				interrupts = <9>;
				status = "disabled";
			};

			simdbg@8003c000 {
				reg = <0x8003c000 200>;
				status = "disabled";
			};

			simgpmisel@8003c200 {
				reg = <0x8003c200 100>;
				status = "disabled";
			};

			simsspsel@8003c300 {
				reg = <0x8003c300 100>;
				status = "disabled";
			};

			simmemsel@8003c400 {
				reg = <0x8003c400 100>;
				status = "disabled";
			};

			gpiomon@8003c500 {
				reg = <0x8003c500 100>;
				status = "disabled";
			};

			simenet@8003c700 {
				reg = <0x8003c700 100>;
				status = "disabled";
			};

			armjtag@8003c800 {
				reg = <0x8003c800 100>;
				status = "disabled";
			};
                };

		apbx@80040000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80040000 0x40000>;
			ranges;

			clkctl@80040000 {
				reg = <0x80040000 2000>;
				status = "disabled";
			};

			saif0: saif@80042000 {
				reg = <0x80042000 2000>;
				interrupts = <59 80>;
				status = "disabled";
			};

			power@80044000 {
				reg = <0x80044000 2000>;
				status = "disabled";
			};

			saif1: saif@80046000 {
				reg = <0x80046000 2000>;
				interrupts = <58 81>;
				status = "disabled";
			};

			lradc@80050000 {
				reg = <0x80050000 2000>;
				status = "disabled";
			};

			spdif@80054000 {
				reg = <0x80054000 2000>;
				interrupts = <45 66>;
				status = "disabled";
			};

			rtc@80056000 {
				reg = <0x80056000 2000>;
				interrupts = <28 29>;
				status = "disabled";
			};

			i2c0: i2c@80058000 {
				reg = <0x80058000 2000>;
				interrupts = <111 68>;
				status = "disabled";
			};

			i2c1: i2c@8005a000 {
				reg = <0x8005a000 2000>;
				interrupts = <110 69>;
				status = "disabled";
			};

			pwm@80064000 {
				reg = <0x80064000 2000>;
				status = "disabled";
			};

			timrot@80068000 {
				reg = <0x80068000 2000>;
				status = "disabled";
			};

			auart0: serial@8006a000 {
				reg = <0x8006a000 0x2000>;
				interrupts = <112 70 71>;
				status = "disabled";
			};

			auart1: serial@8006c000 {
				reg = <0x8006c000 0x2000>;
				interrupts = <113 72 73>;
				status = "disabled";
			};

			auart2: serial@8006e000 {
				reg = <0x8006e000 0x2000>;
				interrupts = <114 74 75>;
				status = "disabled";
			};

			auart3: serial@80070000 {
				reg = <0x80070000 0x2000>;
				interrupts = <115 76 77>;
				status = "disabled";
			};

			auart4: serial@80072000 {
				reg = <0x80072000 0x2000>;
				interrupts = <116 78 79>;
				status = "disabled";
			};

			duart: serial@80074000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x80074000 0x1000>;
				interrupts = <47>;
				status = "disabled";
			};

			usbphy0: usbphy@8007c000 {
				reg = <0x8007c000 0x2000>;
				status = "disabled";
			};

			usbphy1: usbphy@8007e000 {
				reg = <0x8007e000 0x2000>;
				status = "disabled";
			};
		};
	};

	ahb@80080000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80080000 0x80000>;
		ranges;

		usbctrl0: usbctrl@80080000 {
			reg = <0x80080000 0x10000>;
			status = "disabled";
		};

		usbctrl1: usbctrl@80090000 {
			reg = <0x80090000 0x10000>;
			status = "disabled";
		};

		dflpt@800c0000 {
			reg = <0x800c0000 0x10000>;
			status = "disabled";
		};

		mac0: ethernet@800f0000 {
			compatible = "fsl,imx28-fec";
			reg = <0x800f0000 0x4000>;
			interrupts = <101>;
			status = "disabled";
		};

		mac1: ethernet@800f4000 {
			compatible = "fsl,imx28-fec";
			reg = <0x800f4000 0x4000>;
			interrupts = <102>;
			status = "disabled";
		};

		switch@800f8000 {
			reg = <0x800f8000 0x8000>;
			status = "disabled";
		};

	};
};