| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2012 Regents of the University of California |
| */ |
| |
| #include <asm/thread_info.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/asm.h> |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <asm/thread_info.h> |
| #include <asm/page.h> |
| #include <asm/csr.h> |
| #include <asm/hwcap.h> |
| #include <asm/image.h> |
| |
| __INIT |
| ENTRY(_start) |
| /* |
| * Image header expected by Linux boot-loaders. The image header data |
| * structure is described in asm/image.h. |
| * Do not modify it without modifying the structure and all bootloaders |
| * that expects this header format!! |
| */ |
| /* jump to start kernel */ |
| j _start_kernel |
| /* reserved */ |
| .word 0 |
| .balign 8 |
| #if __riscv_xlen == 64 |
| /* Image load offset(2MB) from start of RAM */ |
| .dword 0x200000 |
| #else |
| /* Image load offset(4MB) from start of RAM */ |
| .dword 0x400000 |
| #endif |
| /* Effective size of kernel image */ |
| .dword _end - _start |
| .dword __HEAD_FLAGS |
| .word RISCV_HEADER_VERSION |
| .word 0 |
| .dword 0 |
| .ascii RISCV_IMAGE_MAGIC |
| .balign 4 |
| .ascii RISCV_IMAGE_MAGIC2 |
| .word 0 |
| |
| .global _start_kernel |
| _start_kernel: |
| /* Mask all interrupts */ |
| csrw CSR_IE, zero |
| csrw CSR_IP, zero |
| |
| #ifdef CONFIG_RISCV_M_MODE |
| /* flush the instruction cache */ |
| fence.i |
| |
| /* Reset all registers except ra, a0, a1 */ |
| call reset_regs |
| |
| /* |
| * The hartid in a0 is expected later on, and we have no firmware |
| * to hand it to us. |
| */ |
| csrr a0, CSR_MHARTID |
| #endif /* CONFIG_RISCV_M_MODE */ |
| |
| /* Load the global pointer */ |
| .option push |
| .option norelax |
| la gp, __global_pointer$ |
| .option pop |
| |
| /* |
| * Disable FPU to detect illegal usage of |
| * floating point in kernel space |
| */ |
| li t0, SR_FS |
| csrc CSR_STATUS, t0 |
| |
| #ifdef CONFIG_SMP |
| li t0, CONFIG_NR_CPUS |
| blt a0, t0, .Lgood_cores |
| tail .Lsecondary_park |
| .Lgood_cores: |
| #endif |
| |
| /* Pick one hart to run the main boot sequence */ |
| la a3, hart_lottery |
| li a2, 1 |
| amoadd.w a3, a2, (a3) |
| bnez a3, .Lsecondary_start |
| |
| /* Clear BSS for flat non-ELF images */ |
| la a3, __bss_start |
| la a4, __bss_stop |
| ble a4, a3, clear_bss_done |
| clear_bss: |
| REG_S zero, (a3) |
| add a3, a3, RISCV_SZPTR |
| blt a3, a4, clear_bss |
| clear_bss_done: |
| |
| /* Save hart ID and DTB physical address */ |
| mv s0, a0 |
| mv s1, a1 |
| la a2, boot_cpu_hartid |
| REG_S a0, (a2) |
| |
| /* Initialize page tables and relocate to virtual addresses */ |
| la sp, init_thread_union + THREAD_SIZE |
| mv a0, s1 |
| call setup_vm |
| #ifdef CONFIG_MMU |
| la a0, early_pg_dir |
| call relocate |
| #endif /* CONFIG_MMU */ |
| |
| /* Restore C environment */ |
| la tp, init_task |
| sw zero, TASK_TI_CPU(tp) |
| la sp, init_thread_union + THREAD_SIZE |
| |
| #ifdef CONFIG_KASAN |
| call kasan_early_init |
| #endif |
| /* Start the kernel */ |
| call parse_dtb |
| tail start_kernel |
| |
| #ifdef CONFIG_MMU |
| relocate: |
| /* Relocate return address */ |
| li a1, PAGE_OFFSET |
| la a2, _start |
| sub a1, a1, a2 |
| add ra, ra, a1 |
| |
| /* Point stvec to virtual address of intruction after satp write */ |
| la a2, 1f |
| add a2, a2, a1 |
| csrw CSR_TVEC, a2 |
| |
| /* Compute satp for kernel page tables, but don't load it yet */ |
| srl a2, a0, PAGE_SHIFT |
| li a1, SATP_MODE |
| or a2, a2, a1 |
| |
| /* |
| * Load trampoline page directory, which will cause us to trap to |
| * stvec if VA != PA, or simply fall through if VA == PA. We need a |
| * full fence here because setup_vm() just wrote these PTEs and we need |
| * to ensure the new translations are in use. |
| */ |
| la a0, trampoline_pg_dir |
| srl a0, a0, PAGE_SHIFT |
| or a0, a0, a1 |
| sfence.vma |
| csrw CSR_SATP, a0 |
| .align 2 |
| 1: |
| /* Set trap vector to spin forever to help debug */ |
| la a0, .Lsecondary_park |
| csrw CSR_TVEC, a0 |
| |
| /* Reload the global pointer */ |
| .option push |
| .option norelax |
| la gp, __global_pointer$ |
| .option pop |
| |
| /* |
| * Switch to kernel page tables. A full fence is necessary in order to |
| * avoid using the trampoline translations, which are only correct for |
| * the first superpage. Fetching the fence is guarnteed to work |
| * because that first superpage is translated the same way. |
| */ |
| csrw CSR_SATP, a2 |
| sfence.vma |
| |
| ret |
| #endif /* CONFIG_MMU */ |
| |
| .Lsecondary_start: |
| #ifdef CONFIG_SMP |
| /* Set trap vector to spin forever to help debug */ |
| la a3, .Lsecondary_park |
| csrw CSR_TVEC, a3 |
| |
| slli a3, a0, LGREG |
| la a1, __cpu_up_stack_pointer |
| la a2, __cpu_up_task_pointer |
| add a1, a3, a1 |
| add a2, a3, a2 |
| |
| /* |
| * This hart didn't win the lottery, so we wait for the winning hart to |
| * get far enough along the boot process that it should continue. |
| */ |
| .Lwait_for_cpu_up: |
| /* FIXME: We should WFI to save some energy here. */ |
| REG_L sp, (a1) |
| REG_L tp, (a2) |
| beqz sp, .Lwait_for_cpu_up |
| beqz tp, .Lwait_for_cpu_up |
| fence |
| |
| #ifdef CONFIG_MMU |
| /* Enable virtual memory and relocate to virtual address */ |
| la a0, swapper_pg_dir |
| call relocate |
| #endif |
| |
| tail smp_callin |
| #endif |
| |
| END(_start) |
| |
| #ifdef CONFIG_RISCV_M_MODE |
| ENTRY(reset_regs) |
| li sp, 0 |
| li gp, 0 |
| li tp, 0 |
| li t0, 0 |
| li t1, 0 |
| li t2, 0 |
| li s0, 0 |
| li s1, 0 |
| li a2, 0 |
| li a3, 0 |
| li a4, 0 |
| li a5, 0 |
| li a6, 0 |
| li a7, 0 |
| li s2, 0 |
| li s3, 0 |
| li s4, 0 |
| li s5, 0 |
| li s6, 0 |
| li s7, 0 |
| li s8, 0 |
| li s9, 0 |
| li s10, 0 |
| li s11, 0 |
| li t3, 0 |
| li t4, 0 |
| li t5, 0 |
| li t6, 0 |
| csrw CSR_SCRATCH, 0 |
| |
| #ifdef CONFIG_FPU |
| csrr t0, CSR_MISA |
| andi t0, t0, (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D) |
| beqz t0, .Lreset_regs_done |
| |
| li t1, SR_FS |
| csrs CSR_STATUS, t1 |
| fmv.s.x f0, zero |
| fmv.s.x f1, zero |
| fmv.s.x f2, zero |
| fmv.s.x f3, zero |
| fmv.s.x f4, zero |
| fmv.s.x f5, zero |
| fmv.s.x f6, zero |
| fmv.s.x f7, zero |
| fmv.s.x f8, zero |
| fmv.s.x f9, zero |
| fmv.s.x f10, zero |
| fmv.s.x f11, zero |
| fmv.s.x f12, zero |
| fmv.s.x f13, zero |
| fmv.s.x f14, zero |
| fmv.s.x f15, zero |
| fmv.s.x f16, zero |
| fmv.s.x f17, zero |
| fmv.s.x f18, zero |
| fmv.s.x f19, zero |
| fmv.s.x f20, zero |
| fmv.s.x f21, zero |
| fmv.s.x f22, zero |
| fmv.s.x f23, zero |
| fmv.s.x f24, zero |
| fmv.s.x f25, zero |
| fmv.s.x f26, zero |
| fmv.s.x f27, zero |
| fmv.s.x f28, zero |
| fmv.s.x f29, zero |
| fmv.s.x f30, zero |
| fmv.s.x f31, zero |
| csrw fcsr, 0 |
| /* note that the caller must clear SR_FS */ |
| #endif /* CONFIG_FPU */ |
| .Lreset_regs_done: |
| ret |
| END(reset_regs) |
| #endif /* CONFIG_RISCV_M_MODE */ |
| |
| .section ".text", "ax",@progbits |
| .align 2 |
| .Lsecondary_park: |
| /* We lack SMP support or have too many harts, so park this hart */ |
| wfi |
| j .Lsecondary_park |
| |
| __PAGE_ALIGNED_BSS |
| /* Empty zero page */ |
| .balign PAGE_SIZE |