| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2015, 2016 Cavium, Inc. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/of_pci.h> |
| #include <linux/of.h> |
| #include <linux/pci-ecam.h> |
| #include <linux/platform_device.h> |
| |
| static void set_val(u32 v, int where, int size, u32 *val) |
| { |
| int shift = (where & 3) * 8; |
| |
| pr_debug("set_val %04x: %08x\n", (unsigned)(where & ~3), v); |
| v >>= shift; |
| if (size == 1) |
| v &= 0xff; |
| else if (size == 2) |
| v &= 0xffff; |
| *val = v; |
| } |
| |
| static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus, |
| unsigned int devfn, int where, int size, u32 *val) |
| { |
| void __iomem *addr; |
| u32 v; |
| |
| /* Entries are 16-byte aligned; bits[2,3] select word in entry */ |
| int where_a = where & 0xc; |
| |
| if (where_a == 0) { |
| set_val(e0, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0x4) { |
| addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| v = readl(addr); |
| v &= ~0xf; |
| v |= 2; /* EA entry-1. Base-L */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0x8) { |
| u32 barl_orig; |
| u32 barl_rb; |
| |
| addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| barl_orig = readl(addr + 0); |
| writel(0xffffffff, addr + 0); |
| barl_rb = readl(addr + 0); |
| writel(barl_orig, addr + 0); |
| /* zeros in unsettable bits */ |
| v = ~barl_rb & ~3; |
| v |= 0xc; /* EA entry-2. Offset-L */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xc) { |
| addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */ |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| v = readl(addr); /* EA entry-3. Base-H */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| struct pci_config_window *cfg = bus->sysdata; |
| int where_a = where & ~3; |
| void __iomem *addr; |
| u32 node_bits; |
| u32 v; |
| |
| /* EA Base[63:32] may be missing some bits ... */ |
| switch (where_a) { |
| case 0xa8: |
| case 0xbc: |
| case 0xd0: |
| case 0xe4: |
| break; |
| default: |
| return pci_generic_config_read(bus, devfn, where, size, val); |
| } |
| |
| addr = bus->ops->map_bus(bus, devfn, where_a); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| v = readl(addr); |
| |
| /* |
| * Bit 44 of the 64-bit Base must match the same bit in |
| * the config space access window. Since we are working with |
| * the high-order 32 bits, shift everything down by 32 bits. |
| */ |
| node_bits = (cfg->res.start >> 32) & (1 << 12); |
| |
| v |= node_bits; |
| set_val(v, where, size, val); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| u32 v; |
| u32 vendor_device; |
| u32 class_rev; |
| void __iomem *addr; |
| int cfg_type; |
| int where_a = where & ~3; |
| |
| addr = bus->ops->map_bus(bus, devfn, 0xc); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| v = readl(addr); |
| |
| /* Check for non type-00 header */ |
| cfg_type = (v >> 16) & 0x7f; |
| |
| addr = bus->ops->map_bus(bus, devfn, 8); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| class_rev = readl(addr); |
| if (class_rev == 0xffffffff) |
| goto no_emulation; |
| |
| if ((class_rev & 0xff) >= 8) { |
| /* Pass-2 handling */ |
| if (cfg_type) |
| goto no_emulation; |
| return thunder_ecam_p2_config_read(bus, devfn, where, |
| size, val); |
| } |
| |
| /* |
| * All BARs have fixed addresses specified by the EA |
| * capability; they must return zero on read. |
| */ |
| if (cfg_type == 0 && |
| ((where >= 0x10 && where < 0x2c) || |
| (where >= 0x1a4 && where < 0x1bc))) { |
| /* BAR or SR-IOV BAR */ |
| *val = 0; |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| addr = bus->ops->map_bus(bus, devfn, 0); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| vendor_device = readl(addr); |
| if (vendor_device == 0xffffffff) |
| goto no_emulation; |
| |
| pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n", |
| vendor_device & 0xffff, vendor_device >> 16, class_rev, |
| (unsigned) where, devfn); |
| |
| /* Check for non type-00 header */ |
| if (cfg_type == 0) { |
| bool has_msix; |
| bool is_nic = (vendor_device == 0xa01e177d); |
| bool is_tns = (vendor_device == 0xa01f177d); |
| |
| addr = bus->ops->map_bus(bus, devfn, 0x70); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| /* E_CAP */ |
| v = readl(addr); |
| has_msix = (v & 0xff00) != 0; |
| |
| if (!has_msix && where_a == 0x70) { |
| v |= 0xbc00; /* next capability is EA at 0xbc */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xb0) { |
| addr = bus->ops->map_bus(bus, devfn, where_a); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| v = readl(addr); |
| if (v & 0xff00) |
| pr_err("Bad MSIX cap header: %08x\n", v); |
| v |= 0xbc00; /* next capability is EA at 0xbc */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xbc) { |
| if (is_nic) |
| v = 0x40014; /* EA last in chain, 4 entries */ |
| else if (is_tns) |
| v = 0x30014; /* EA last in chain, 3 entries */ |
| else if (has_msix) |
| v = 0x20014; /* EA last in chain, 2 entries */ |
| else |
| v = 0x10014; /* EA last in chain, 1 entry */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a >= 0xc0 && where_a < 0xd0) |
| /* EA entry-0. PP=0, BAR0 Size:3 */ |
| return handle_ea_bar(0x80ff0003, |
| 0x10, bus, devfn, where, |
| size, val); |
| if (where_a >= 0xd0 && where_a < 0xe0 && has_msix) |
| /* EA entry-1. PP=0, BAR4 Size:3 */ |
| return handle_ea_bar(0x80ff0043, |
| 0x20, bus, devfn, where, |
| size, val); |
| if (where_a >= 0xe0 && where_a < 0xf0 && is_tns) |
| /* EA entry-2. PP=0, BAR2, Size:3 */ |
| return handle_ea_bar(0x80ff0023, |
| 0x18, bus, devfn, where, |
| size, val); |
| if (where_a >= 0xe0 && where_a < 0xf0 && is_nic) |
| /* EA entry-2. PP=4, VF_BAR0 (9), Size:3 */ |
| return handle_ea_bar(0x80ff0493, |
| 0x1a4, bus, devfn, where, |
| size, val); |
| if (where_a >= 0xf0 && where_a < 0x100 && is_nic) |
| /* EA entry-3. PP=4, VF_BAR4 (d), Size:3 */ |
| return handle_ea_bar(0x80ff04d3, |
| 0x1b4, bus, devfn, where, |
| size, val); |
| } else if (cfg_type == 1) { |
| bool is_rsl_bridge = devfn == 0x08; |
| bool is_rad_bridge = devfn == 0xa0; |
| bool is_zip_bridge = devfn == 0xa8; |
| bool is_dfa_bridge = devfn == 0xb0; |
| bool is_nic_bridge = devfn == 0x10; |
| |
| if (where_a == 0x70) { |
| addr = bus->ops->map_bus(bus, devfn, where_a); |
| if (!addr) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| v = readl(addr); |
| if (v & 0xff00) |
| pr_err("Bad PCIe cap header: %08x\n", v); |
| v |= 0xbc00; /* next capability is EA at 0xbc */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xbc) { |
| if (is_nic_bridge) |
| v = 0x10014; /* EA last in chain, 1 entry */ |
| else |
| v = 0x00014; /* EA last in chain, no entries */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xc0) { |
| if (is_rsl_bridge || is_nic_bridge) |
| v = 0x0101; /* subordinate:secondary = 1:1 */ |
| else if (is_rad_bridge) |
| v = 0x0202; /* subordinate:secondary = 2:2 */ |
| else if (is_zip_bridge) |
| v = 0x0303; /* subordinate:secondary = 3:3 */ |
| else if (is_dfa_bridge) |
| v = 0x0404; /* subordinate:secondary = 4:4 */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xc4 && is_nic_bridge) { |
| /* Enabled, not-Write, SP=ff, PP=05, BEI=6, ES=4 */ |
| v = 0x80ff0564; |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xc8 && is_nic_bridge) { |
| v = 0x00000002; /* Base-L 64-bit */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xcc && is_nic_bridge) { |
| v = 0xfffffffe; /* MaxOffset-L 64-bit */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xd0 && is_nic_bridge) { |
| v = 0x00008430; /* NIC Base-H */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| if (where_a == 0xd4 && is_nic_bridge) { |
| v = 0x0000000f; /* MaxOffset-H */ |
| set_val(v, where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| } |
| no_emulation: |
| return pci_generic_config_read(bus, devfn, where, size, val); |
| } |
| |
| static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| /* |
| * All BARs have fixed addresses; ignore BAR writes so they |
| * don't get corrupted. |
| */ |
| if ((where >= 0x10 && where < 0x2c) || |
| (where >= 0x1a4 && where < 0x1bc)) |
| /* BAR or SR-IOV BAR */ |
| return PCIBIOS_SUCCESSFUL; |
| |
| return pci_generic_config_write(bus, devfn, where, size, val); |
| } |
| |
| static struct pci_ecam_ops pci_thunder_ecam_ops = { |
| .bus_shift = 20, |
| .pci_ops = { |
| .map_bus = pci_ecam_map_bus, |
| .read = thunder_ecam_config_read, |
| .write = thunder_ecam_config_write, |
| } |
| }; |
| |
| static const struct of_device_id thunder_ecam_of_match[] = { |
| { .compatible = "cavium,pci-host-thunder-ecam" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, thunder_ecam_of_match); |
| |
| static int thunder_ecam_probe(struct platform_device *pdev) |
| { |
| return pci_host_common_probe(pdev, &pci_thunder_ecam_ops); |
| } |
| |
| static struct platform_driver thunder_ecam_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = thunder_ecam_of_match, |
| }, |
| .probe = thunder_ecam_probe, |
| }; |
| module_platform_driver(thunder_ecam_driver); |
| |
| MODULE_DESCRIPTION("Thunder ECAM PCI host driver"); |
| MODULE_LICENSE("GPL v2"); |