| // SPDX-License-Identifier: GPL-2.0-only |
| /* ADC driver for AXP20X and AXP22X PMICs |
| * |
| * Copyright (c) 2016 Free Electrons NextThing Co. |
| * Quentin Schulz <quentin.schulz@free-electrons.com> |
| */ |
| |
| #include <linux/completion.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/thermal.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/driver.h> |
| #include <linux/iio/machine.h> |
| #include <linux/mfd/axp20x.h> |
| |
| #define AXP20X_ADC_EN1_MASK GENMASK(7, 0) |
| |
| #define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7)) |
| #define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0)) |
| |
| #define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0) |
| #define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1) |
| #define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0)) |
| #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) |
| |
| #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) |
| #define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) |
| #define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) |
| #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) |
| #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) |
| #define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) |
| #define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) |
| #define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) |
| |
| #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \ |
| { \ |
| .type = _type, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .address = _reg, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE), \ |
| .datasheet_name = _name, \ |
| } |
| |
| #define AXP20X_ADC_CHANNEL_OFFSET(_channel, _name, _type, _reg) \ |
| { \ |
| .type = _type, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .address = _reg, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) |\ |
| BIT(IIO_CHAN_INFO_OFFSET),\ |
| .datasheet_name = _name, \ |
| } |
| |
| struct axp_data; |
| |
| struct axp20x_adc_iio { |
| struct regmap *regmap; |
| const struct axp_data *data; |
| }; |
| |
| enum axp20x_adc_channel_v { |
| AXP20X_ACIN_V = 0, |
| AXP20X_VBUS_V, |
| AXP20X_TS_IN, |
| AXP20X_GPIO0_V, |
| AXP20X_GPIO1_V, |
| AXP20X_IPSOUT_V, |
| AXP20X_BATT_V, |
| }; |
| |
| enum axp20x_adc_channel_i { |
| AXP20X_ACIN_I = 0, |
| AXP20X_VBUS_I, |
| AXP20X_BATT_CHRG_I, |
| AXP20X_BATT_DISCHRG_I, |
| }; |
| |
| enum axp22x_adc_channel_v { |
| AXP22X_TS_IN = 0, |
| AXP22X_BATT_V, |
| }; |
| |
| enum axp22x_adc_channel_i { |
| AXP22X_BATT_CHRG_I = 1, |
| AXP22X_BATT_DISCHRG_I, |
| }; |
| |
| enum axp813_adc_channel_v { |
| AXP813_TS_IN = 0, |
| AXP813_GPIO0_V, |
| AXP813_BATT_V, |
| }; |
| |
| static struct iio_map axp20x_maps[] = { |
| { |
| .consumer_dev_name = "axp20x-usb-power-supply", |
| .consumer_channel = "vbus_v", |
| .adc_channel_label = "vbus_v", |
| }, { |
| .consumer_dev_name = "axp20x-usb-power-supply", |
| .consumer_channel = "vbus_i", |
| .adc_channel_label = "vbus_i", |
| }, { |
| .consumer_dev_name = "axp20x-ac-power-supply", |
| .consumer_channel = "acin_v", |
| .adc_channel_label = "acin_v", |
| }, { |
| .consumer_dev_name = "axp20x-ac-power-supply", |
| .consumer_channel = "acin_i", |
| .adc_channel_label = "acin_i", |
| }, { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_v", |
| .adc_channel_label = "batt_v", |
| }, { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_chrg_i", |
| .adc_channel_label = "batt_chrg_i", |
| }, { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_dischrg_i", |
| .adc_channel_label = "batt_dischrg_i", |
| }, { /* sentinel */ } |
| }; |
| |
| static struct iio_map axp22x_maps[] = { |
| { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_v", |
| .adc_channel_label = "batt_v", |
| }, { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_chrg_i", |
| .adc_channel_label = "batt_chrg_i", |
| }, { |
| .consumer_dev_name = "axp20x-battery-power-supply", |
| .consumer_channel = "batt_dischrg_i", |
| .adc_channel_label = "batt_dischrg_i", |
| }, { /* sentinel */ } |
| }; |
| |
| /* |
| * Channels are mapped by physical system. Their channels share the same index. |
| * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw. |
| * The only exception is for the battery. batt_v will be in_voltage6_raw and |
| * charge current in_current6_raw and discharge current will be in_current7_raw. |
| */ |
| static const struct iio_chan_spec axp20x_adc_channels[] = { |
| AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE, |
| AXP20X_ACIN_V_ADC_H), |
| AXP20X_ADC_CHANNEL(AXP20X_ACIN_I, "acin_i", IIO_CURRENT, |
| AXP20X_ACIN_I_ADC_H), |
| AXP20X_ADC_CHANNEL(AXP20X_VBUS_V, "vbus_v", IIO_VOLTAGE, |
| AXP20X_VBUS_V_ADC_H), |
| AXP20X_ADC_CHANNEL(AXP20X_VBUS_I, "vbus_i", IIO_CURRENT, |
| AXP20X_VBUS_I_ADC_H), |
| { |
| .type = IIO_TEMP, |
| .address = AXP20X_TEMP_ADC_H, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OFFSET), |
| .datasheet_name = "pmic_temp", |
| }, |
| AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO0_V, "gpio0_v", IIO_VOLTAGE, |
| AXP20X_GPIO0_V_ADC_H), |
| AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO1_V, "gpio1_v", IIO_VOLTAGE, |
| AXP20X_GPIO1_V_ADC_H), |
| AXP20X_ADC_CHANNEL(AXP20X_IPSOUT_V, "ipsout_v", IIO_VOLTAGE, |
| AXP20X_IPSOUT_V_HIGH_H), |
| AXP20X_ADC_CHANNEL(AXP20X_BATT_V, "batt_v", IIO_VOLTAGE, |
| AXP20X_BATT_V_H), |
| AXP20X_ADC_CHANNEL(AXP20X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, |
| AXP20X_BATT_CHRG_I_H), |
| AXP20X_ADC_CHANNEL(AXP20X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, |
| AXP20X_BATT_DISCHRG_I_H), |
| }; |
| |
| static const struct iio_chan_spec axp22x_adc_channels[] = { |
| { |
| .type = IIO_TEMP, |
| .address = AXP22X_PMIC_TEMP_H, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OFFSET), |
| .datasheet_name = "pmic_temp", |
| }, |
| AXP20X_ADC_CHANNEL(AXP22X_BATT_V, "batt_v", IIO_VOLTAGE, |
| AXP20X_BATT_V_H), |
| AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, |
| AXP20X_BATT_CHRG_I_H), |
| AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, |
| AXP20X_BATT_DISCHRG_I_H), |
| }; |
| |
| static const struct iio_chan_spec axp813_adc_channels[] = { |
| { |
| .type = IIO_TEMP, |
| .address = AXP22X_PMIC_TEMP_H, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OFFSET), |
| .datasheet_name = "pmic_temp", |
| }, |
| AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE, |
| AXP288_GP_ADC_H), |
| AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE, |
| AXP20X_BATT_V_H), |
| AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, |
| AXP20X_BATT_CHRG_I_H), |
| AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, |
| AXP20X_BATT_DISCHRG_I_H), |
| }; |
| |
| static int axp20x_adc_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| int size = 12; |
| |
| /* |
| * N.B.: Unlike the Chinese datasheets tell, the charging current is |
| * stored on 12 bits, not 13 bits. Only discharging current is on 13 |
| * bits. |
| */ |
| if (chan->type == IIO_CURRENT && chan->channel == AXP20X_BATT_DISCHRG_I) |
| size = 13; |
| else |
| size = 12; |
| |
| *val = axp20x_read_variable_width(info->regmap, chan->address, size); |
| if (*val < 0) |
| return *val; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int axp22x_adc_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| |
| *val = axp20x_read_variable_width(info->regmap, chan->address, 12); |
| if (*val < 0) |
| return *val; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int axp813_adc_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| |
| *val = axp20x_read_variable_width(info->regmap, chan->address, 12); |
| if (*val < 0) |
| return *val; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) |
| { |
| switch (channel) { |
| case AXP20X_ACIN_V: |
| case AXP20X_VBUS_V: |
| *val = 1; |
| *val2 = 700000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP20X_GPIO0_V: |
| case AXP20X_GPIO1_V: |
| *val = 0; |
| *val2 = 500000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP20X_BATT_V: |
| *val = 1; |
| *val2 = 100000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP20X_IPSOUT_V: |
| *val = 1; |
| *val2 = 400000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp813_adc_scale_voltage(int channel, int *val, int *val2) |
| { |
| switch (channel) { |
| case AXP813_GPIO0_V: |
| *val = 0; |
| *val2 = 800000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP813_BATT_V: |
| *val = 1; |
| *val2 = 100000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp20x_adc_scale_current(int channel, int *val, int *val2) |
| { |
| switch (channel) { |
| case AXP20X_ACIN_I: |
| *val = 0; |
| *val2 = 625000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP20X_VBUS_I: |
| *val = 0; |
| *val2 = 375000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case AXP20X_BATT_DISCHRG_I: |
| case AXP20X_BATT_CHRG_I: |
| *val = 0; |
| *val2 = 500000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val, |
| int *val2) |
| { |
| switch (chan->type) { |
| case IIO_VOLTAGE: |
| return axp20x_adc_scale_voltage(chan->channel, val, val2); |
| |
| case IIO_CURRENT: |
| return axp20x_adc_scale_current(chan->channel, val, val2); |
| |
| case IIO_TEMP: |
| *val = 100; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val, |
| int *val2) |
| { |
| switch (chan->type) { |
| case IIO_VOLTAGE: |
| if (chan->channel != AXP22X_BATT_V) |
| return -EINVAL; |
| |
| *val = 1; |
| *val2 = 100000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case IIO_CURRENT: |
| *val = 1; |
| return IIO_VAL_INT; |
| |
| case IIO_TEMP: |
| *val = 100; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val, |
| int *val2) |
| { |
| switch (chan->type) { |
| case IIO_VOLTAGE: |
| return axp813_adc_scale_voltage(chan->channel, val, val2); |
| |
| case IIO_CURRENT: |
| *val = 1; |
| return IIO_VAL_INT; |
| |
| case IIO_TEMP: |
| *val = 100; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, |
| int *val) |
| { |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| int ret; |
| |
| ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val); |
| if (ret < 0) |
| return ret; |
| |
| switch (channel) { |
| case AXP20X_GPIO0_V: |
| *val &= AXP20X_GPIO10_IN_RANGE_GPIO0; |
| break; |
| |
| case AXP20X_GPIO1_V: |
| *val &= AXP20X_GPIO10_IN_RANGE_GPIO1; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| *val = *val ? 700000 : 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int axp20x_adc_offset(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| switch (chan->type) { |
| case IIO_VOLTAGE: |
| return axp20x_adc_offset_voltage(indio_dev, chan->channel, val); |
| |
| case IIO_TEMP: |
| *val = -1447; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp20x_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_OFFSET: |
| return axp20x_adc_offset(indio_dev, chan, val); |
| |
| case IIO_CHAN_INFO_SCALE: |
| return axp20x_adc_scale(chan, val, val2); |
| |
| case IIO_CHAN_INFO_RAW: |
| return axp20x_adc_raw(indio_dev, chan, val); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp22x_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_OFFSET: |
| *val = -2677; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| return axp22x_adc_scale(chan, val, val2); |
| |
| case IIO_CHAN_INFO_RAW: |
| return axp22x_adc_raw(indio_dev, chan, val); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp813_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_OFFSET: |
| *val = -2667; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| return axp813_adc_scale(chan, val, val2); |
| |
| case IIO_CHAN_INFO_RAW: |
| return axp813_adc_raw(indio_dev, chan, val); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int axp20x_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, int val2, |
| long mask) |
| { |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| unsigned int reg, regval; |
| |
| /* |
| * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets |
| * for (independently) GPIO0 and GPIO1 when in ADC mode. |
| */ |
| if (mask != IIO_CHAN_INFO_OFFSET) |
| return -EINVAL; |
| |
| if (val != 0 && val != 700000) |
| return -EINVAL; |
| |
| val = val ? 1 : 0; |
| |
| switch (chan->channel) { |
| case AXP20X_GPIO0_V: |
| reg = AXP20X_GPIO10_IN_RANGE_GPIO0; |
| regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val); |
| break; |
| |
| case AXP20X_GPIO1_V: |
| reg = AXP20X_GPIO10_IN_RANGE_GPIO1; |
| regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg, |
| regval); |
| } |
| |
| static const struct iio_info axp20x_adc_iio_info = { |
| .read_raw = axp20x_read_raw, |
| .write_raw = axp20x_write_raw, |
| }; |
| |
| static const struct iio_info axp22x_adc_iio_info = { |
| .read_raw = axp22x_read_raw, |
| }; |
| |
| static const struct iio_info axp813_adc_iio_info = { |
| .read_raw = axp813_read_raw, |
| }; |
| |
| static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate) |
| { |
| return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, |
| AXP20X_ADC_RATE_MASK, |
| AXP20X_ADC_RATE_HZ(rate)); |
| } |
| |
| static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate) |
| { |
| return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, |
| AXP20X_ADC_RATE_MASK, |
| AXP22X_ADC_RATE_HZ(rate)); |
| } |
| |
| static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate) |
| { |
| return regmap_update_bits(info->regmap, AXP813_ADC_RATE, |
| AXP813_ADC_RATE_MASK, |
| AXP813_ADC_RATE_HZ(rate)); |
| } |
| |
| struct axp_data { |
| const struct iio_info *iio_info; |
| int num_channels; |
| struct iio_chan_spec const *channels; |
| unsigned long adc_en1_mask; |
| int (*adc_rate)(struct axp20x_adc_iio *info, |
| int rate); |
| bool adc_en2; |
| struct iio_map *maps; |
| }; |
| |
| static const struct axp_data axp20x_data = { |
| .iio_info = &axp20x_adc_iio_info, |
| .num_channels = ARRAY_SIZE(axp20x_adc_channels), |
| .channels = axp20x_adc_channels, |
| .adc_en1_mask = AXP20X_ADC_EN1_MASK, |
| .adc_rate = axp20x_adc_rate, |
| .adc_en2 = true, |
| .maps = axp20x_maps, |
| }; |
| |
| static const struct axp_data axp22x_data = { |
| .iio_info = &axp22x_adc_iio_info, |
| .num_channels = ARRAY_SIZE(axp22x_adc_channels), |
| .channels = axp22x_adc_channels, |
| .adc_en1_mask = AXP22X_ADC_EN1_MASK, |
| .adc_rate = axp22x_adc_rate, |
| .adc_en2 = false, |
| .maps = axp22x_maps, |
| }; |
| |
| static const struct axp_data axp813_data = { |
| .iio_info = &axp813_adc_iio_info, |
| .num_channels = ARRAY_SIZE(axp813_adc_channels), |
| .channels = axp813_adc_channels, |
| .adc_en1_mask = AXP22X_ADC_EN1_MASK, |
| .adc_rate = axp813_adc_rate, |
| .adc_en2 = false, |
| .maps = axp22x_maps, |
| }; |
| |
| static const struct of_device_id axp20x_adc_of_match[] = { |
| { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, |
| { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, |
| { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); |
| |
| static const struct platform_device_id axp20x_adc_id_match[] = { |
| { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, }, |
| { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, }, |
| { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match); |
| |
| static int axp20x_probe(struct platform_device *pdev) |
| { |
| struct axp20x_adc_iio *info; |
| struct iio_dev *indio_dev; |
| struct axp20x_dev *axp20x_dev; |
| int ret; |
| |
| axp20x_dev = dev_get_drvdata(pdev->dev.parent); |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| info = iio_priv(indio_dev); |
| platform_set_drvdata(pdev, indio_dev); |
| |
| info->regmap = axp20x_dev->regmap; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| if (!dev_fwnode(&pdev->dev)) { |
| const struct platform_device_id *id; |
| |
| id = platform_get_device_id(pdev); |
| info->data = (const struct axp_data *)id->driver_data; |
| } else { |
| struct device *dev = &pdev->dev; |
| |
| info->data = device_get_match_data(dev); |
| } |
| |
| indio_dev->name = platform_get_device_id(pdev)->name; |
| indio_dev->info = info->data->iio_info; |
| indio_dev->num_channels = info->data->num_channels; |
| indio_dev->channels = info->data->channels; |
| |
| /* Enable the ADCs on IP */ |
| regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask); |
| |
| if (info->data->adc_en2) |
| /* Enable GPIO0/1 and internal temperature ADCs */ |
| regmap_update_bits(info->regmap, AXP20X_ADC_EN2, |
| AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); |
| |
| /* Configure ADCs rate */ |
| info->data->adc_rate(info, 100); |
| |
| ret = iio_map_array_register(indio_dev, info->data->maps); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to register IIO maps: %d\n", ret); |
| goto fail_map; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "could not register the device\n"); |
| goto fail_register; |
| } |
| |
| return 0; |
| |
| fail_register: |
| iio_map_array_unregister(indio_dev); |
| |
| fail_map: |
| regmap_write(info->regmap, AXP20X_ADC_EN1, 0); |
| |
| if (info->data->adc_en2) |
| regmap_write(info->regmap, AXP20X_ADC_EN2, 0); |
| |
| return ret; |
| } |
| |
| static int axp20x_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct axp20x_adc_iio *info = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| iio_map_array_unregister(indio_dev); |
| |
| regmap_write(info->regmap, AXP20X_ADC_EN1, 0); |
| |
| if (info->data->adc_en2) |
| regmap_write(info->regmap, AXP20X_ADC_EN2, 0); |
| |
| return 0; |
| } |
| |
| static struct platform_driver axp20x_adc_driver = { |
| .driver = { |
| .name = "axp20x-adc", |
| .of_match_table = axp20x_adc_of_match, |
| }, |
| .id_table = axp20x_adc_id_match, |
| .probe = axp20x_probe, |
| .remove = axp20x_remove, |
| }; |
| |
| module_platform_driver(axp20x_adc_driver); |
| |
| MODULE_DESCRIPTION("ADC driver for AXP20X and AXP22X PMICs"); |
| MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); |
| MODULE_LICENSE("GPL"); |