| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * mma8452.c - Support for following Freescale / NXP 3-axis accelerometers: |
| * |
| * device name digital output 7-bit I2C slave address (pin selectable) |
| * --------------------------------------------------------------------- |
| * MMA8451Q 14 bit 0x1c / 0x1d |
| * MMA8452Q 12 bit 0x1c / 0x1d |
| * MMA8453Q 10 bit 0x1c / 0x1d |
| * MMA8652FC 12 bit 0x1d |
| * MMA8653FC 10 bit 0x1d |
| * FXLS8471Q 14 bit 0x1e / 0x1d / 0x1c / 0x1f |
| * |
| * Copyright 2015 Martin Kepplinger <martink@posteo.de> |
| * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net> |
| * |
| * |
| * TODO: orientation events |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/delay.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define MMA8452_STATUS 0x00 |
| #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) |
| #define MMA8452_OUT_X 0x01 /* MSB first */ |
| #define MMA8452_OUT_Y 0x03 |
| #define MMA8452_OUT_Z 0x05 |
| #define MMA8452_INT_SRC 0x0c |
| #define MMA8452_WHO_AM_I 0x0d |
| #define MMA8452_DATA_CFG 0x0e |
| #define MMA8452_DATA_CFG_FS_MASK GENMASK(1, 0) |
| #define MMA8452_DATA_CFG_FS_2G 0 |
| #define MMA8452_DATA_CFG_FS_4G 1 |
| #define MMA8452_DATA_CFG_FS_8G 2 |
| #define MMA8452_DATA_CFG_HPF_MASK BIT(4) |
| #define MMA8452_HP_FILTER_CUTOFF 0x0f |
| #define MMA8452_HP_FILTER_CUTOFF_SEL_MASK GENMASK(1, 0) |
| #define MMA8452_FF_MT_CFG 0x15 |
| #define MMA8452_FF_MT_CFG_OAE BIT(6) |
| #define MMA8452_FF_MT_CFG_ELE BIT(7) |
| #define MMA8452_FF_MT_SRC 0x16 |
| #define MMA8452_FF_MT_SRC_XHE BIT(1) |
| #define MMA8452_FF_MT_SRC_YHE BIT(3) |
| #define MMA8452_FF_MT_SRC_ZHE BIT(5) |
| #define MMA8452_FF_MT_THS 0x17 |
| #define MMA8452_FF_MT_THS_MASK 0x7f |
| #define MMA8452_FF_MT_COUNT 0x18 |
| #define MMA8452_FF_MT_CHAN_SHIFT 3 |
| #define MMA8452_TRANSIENT_CFG 0x1d |
| #define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1) |
| #define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0) |
| #define MMA8452_TRANSIENT_CFG_ELE BIT(4) |
| #define MMA8452_TRANSIENT_SRC 0x1e |
| #define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1) |
| #define MMA8452_TRANSIENT_SRC_YTRANSE BIT(3) |
| #define MMA8452_TRANSIENT_SRC_ZTRANSE BIT(5) |
| #define MMA8452_TRANSIENT_THS 0x1f |
| #define MMA8452_TRANSIENT_THS_MASK GENMASK(6, 0) |
| #define MMA8452_TRANSIENT_COUNT 0x20 |
| #define MMA8452_TRANSIENT_CHAN_SHIFT 1 |
| #define MMA8452_CTRL_REG1 0x2a |
| #define MMA8452_CTRL_ACTIVE BIT(0) |
| #define MMA8452_CTRL_DR_MASK GENMASK(5, 3) |
| #define MMA8452_CTRL_DR_SHIFT 3 |
| #define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */ |
| #define MMA8452_CTRL_REG2 0x2b |
| #define MMA8452_CTRL_REG2_RST BIT(6) |
| #define MMA8452_CTRL_REG2_MODS_SHIFT 3 |
| #define MMA8452_CTRL_REG2_MODS_MASK 0x1b |
| #define MMA8452_CTRL_REG4 0x2d |
| #define MMA8452_CTRL_REG5 0x2e |
| #define MMA8452_OFF_X 0x2f |
| #define MMA8452_OFF_Y 0x30 |
| #define MMA8452_OFF_Z 0x31 |
| |
| #define MMA8452_MAX_REG 0x31 |
| |
| #define MMA8452_INT_DRDY BIT(0) |
| #define MMA8452_INT_FF_MT BIT(2) |
| #define MMA8452_INT_TRANS BIT(5) |
| |
| #define MMA8451_DEVICE_ID 0x1a |
| #define MMA8452_DEVICE_ID 0x2a |
| #define MMA8453_DEVICE_ID 0x3a |
| #define MMA8652_DEVICE_ID 0x4a |
| #define MMA8653_DEVICE_ID 0x5a |
| #define FXLS8471_DEVICE_ID 0x6a |
| |
| #define MMA8452_AUTO_SUSPEND_DELAY_MS 2000 |
| |
| struct mma8452_data { |
| struct i2c_client *client; |
| struct mutex lock; |
| u8 ctrl_reg1; |
| u8 data_cfg; |
| const struct mma_chip_info *chip_info; |
| int sleep_val; |
| struct regulator *vdd_reg; |
| struct regulator *vddio_reg; |
| |
| /* Ensure correct alignment of time stamp when present */ |
| struct { |
| __be16 channels[3]; |
| s64 ts __aligned(8); |
| } buffer; |
| }; |
| |
| /** |
| * struct mma8452_event_regs - chip specific data related to events |
| * @ev_cfg: event config register address |
| * @ev_cfg_ele: latch bit in event config register |
| * @ev_cfg_chan_shift: number of the bit to enable events in X |
| * direction; in event config register |
| * @ev_src: event source register address |
| * @ev_ths: event threshold register address |
| * @ev_ths_mask: mask for the threshold value |
| * @ev_count: event count (period) register address |
| * |
| * Since not all chips supported by the driver support comparing high pass |
| * filtered data for events (interrupts), different interrupt sources are |
| * used for different chips and the relevant registers are included here. |
| */ |
| struct mma8452_event_regs { |
| u8 ev_cfg; |
| u8 ev_cfg_ele; |
| u8 ev_cfg_chan_shift; |
| u8 ev_src; |
| u8 ev_ths; |
| u8 ev_ths_mask; |
| u8 ev_count; |
| }; |
| |
| static const struct mma8452_event_regs ff_mt_ev_regs = { |
| .ev_cfg = MMA8452_FF_MT_CFG, |
| .ev_cfg_ele = MMA8452_FF_MT_CFG_ELE, |
| .ev_cfg_chan_shift = MMA8452_FF_MT_CHAN_SHIFT, |
| .ev_src = MMA8452_FF_MT_SRC, |
| .ev_ths = MMA8452_FF_MT_THS, |
| .ev_ths_mask = MMA8452_FF_MT_THS_MASK, |
| .ev_count = MMA8452_FF_MT_COUNT |
| }; |
| |
| static const struct mma8452_event_regs trans_ev_regs = { |
| .ev_cfg = MMA8452_TRANSIENT_CFG, |
| .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, |
| .ev_cfg_chan_shift = MMA8452_TRANSIENT_CHAN_SHIFT, |
| .ev_src = MMA8452_TRANSIENT_SRC, |
| .ev_ths = MMA8452_TRANSIENT_THS, |
| .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK, |
| .ev_count = MMA8452_TRANSIENT_COUNT, |
| }; |
| |
| /** |
| * struct mma_chip_info - chip specific data |
| * @chip_id: WHO_AM_I register's value |
| * @channels: struct iio_chan_spec matching the device's |
| * capabilities |
| * @num_channels: number of channels |
| * @mma_scales: scale factors for converting register values |
| * to m/s^2; 3 modes: 2g, 4g, 8g; 2 integers |
| * per mode: m/s^2 and micro m/s^2 |
| * @all_events: all events supported by this chip |
| * @enabled_events: event flags enabled and handled by this driver |
| */ |
| struct mma_chip_info { |
| u8 chip_id; |
| const struct iio_chan_spec *channels; |
| int num_channels; |
| const int mma_scales[3][2]; |
| int all_events; |
| int enabled_events; |
| }; |
| |
| enum { |
| idx_x, |
| idx_y, |
| idx_z, |
| idx_ts, |
| }; |
| |
| static int mma8452_drdy(struct mma8452_data *data) |
| { |
| int tries = 150; |
| |
| while (tries-- > 0) { |
| int ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_STATUS); |
| if (ret < 0) |
| return ret; |
| if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY) |
| return 0; |
| |
| if (data->sleep_val <= 20) |
| usleep_range(data->sleep_val * 250, |
| data->sleep_val * 500); |
| else |
| msleep(20); |
| } |
| |
| dev_err(&data->client->dev, "data not ready\n"); |
| |
| return -EIO; |
| } |
| |
| static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on) |
| { |
| #ifdef CONFIG_PM |
| int ret; |
| |
| if (on) { |
| ret = pm_runtime_resume_and_get(&client->dev); |
| } else { |
| pm_runtime_mark_last_busy(&client->dev); |
| ret = pm_runtime_put_autosuspend(&client->dev); |
| } |
| |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "failed to change power state to %d\n", on); |
| |
| return ret; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int mma8452_read(struct mma8452_data *data, __be16 buf[3]) |
| { |
| int ret = mma8452_drdy(data); |
| |
| if (ret < 0) |
| return ret; |
| |
| ret = mma8452_set_runtime_pm_state(data->client, true); |
| if (ret) |
| return ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(data->client, MMA8452_OUT_X, |
| 3 * sizeof(__be16), (u8 *)buf); |
| |
| ret = mma8452_set_runtime_pm_state(data->client, false); |
| |
| return ret; |
| } |
| |
| static ssize_t mma8452_show_int_plus_micros(char *buf, const int (*vals)[2], |
| int n) |
| { |
| size_t len = 0; |
| |
| while (n-- > 0) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06d ", |
| vals[n][0], vals[n][1]); |
| |
| /* replace trailing space by newline */ |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n, |
| int val, int val2) |
| { |
| while (n-- > 0) |
| if (val == vals[n][0] && val2 == vals[n][1]) |
| return n; |
| |
| return -EINVAL; |
| } |
| |
| static unsigned int mma8452_get_odr_index(struct mma8452_data *data) |
| { |
| return (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >> |
| MMA8452_CTRL_DR_SHIFT; |
| } |
| |
| static const int mma8452_samp_freq[8][2] = { |
| {800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000}, |
| {6, 250000}, {1, 560000} |
| }; |
| |
| /* Datasheet table: step time "Relationship with the ODR" (sample frequency) */ |
| static const unsigned int mma8452_time_step_us[4][8] = { |
| { 1250, 2500, 5000, 10000, 20000, 20000, 20000, 20000 }, /* normal */ |
| { 1250, 2500, 5000, 10000, 20000, 80000, 80000, 80000 }, /* l p l n */ |
| { 1250, 2500, 2500, 2500, 2500, 2500, 2500, 2500 }, /* high res*/ |
| { 1250, 2500, 5000, 10000, 20000, 80000, 160000, 160000 } /* l p */ |
| }; |
| |
| /* Datasheet table "High-Pass Filter Cutoff Options" */ |
| static const int mma8452_hp_filter_cutoff[4][8][4][2] = { |
| { /* normal */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */ |
| { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */ |
| { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, /* 100 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 50 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */ |
| }, |
| { /* low noise low power */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, |
| { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, |
| { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} }, |
| { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} }, |
| { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} } |
| }, |
| { /* high resolution */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} } |
| }, |
| { /* low power */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, |
| { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, |
| { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, |
| { {1, 0}, {0, 500000}, {0, 250000}, {0, 125000} }, |
| { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} }, |
| { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} }, |
| { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} } |
| } |
| }; |
| |
| /* Datasheet table "MODS Oversampling modes averaging values at each ODR" */ |
| static const u16 mma8452_os_ratio[4][8] = { |
| /* 800 Hz, 400 Hz, ... , 1.56 Hz */ |
| { 2, 4, 4, 4, 4, 16, 32, 128 }, /* normal */ |
| { 2, 4, 4, 4, 4, 4, 8, 32 }, /* low power low noise */ |
| { 2, 4, 8, 16, 32, 128, 256, 1024 }, /* high resolution */ |
| { 2, 2, 2, 2, 2, 2, 4, 16 } /* low power */ |
| }; |
| |
| static int mma8452_get_power_mode(struct mma8452_data *data) |
| { |
| int reg; |
| |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_CTRL_REG2); |
| if (reg < 0) |
| return reg; |
| |
| return ((reg & MMA8452_CTRL_REG2_MODS_MASK) >> |
| MMA8452_CTRL_REG2_MODS_SHIFT); |
| } |
| |
| static ssize_t mma8452_show_samp_freq_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return mma8452_show_int_plus_micros(buf, mma8452_samp_freq, |
| ARRAY_SIZE(mma8452_samp_freq)); |
| } |
| |
| static ssize_t mma8452_show_scale_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct mma8452_data *data = iio_priv(i2c_get_clientdata( |
| to_i2c_client(dev))); |
| |
| return mma8452_show_int_plus_micros(buf, data->chip_info->mma_scales, |
| ARRAY_SIZE(data->chip_info->mma_scales)); |
| } |
| |
| static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int i, j; |
| |
| i = mma8452_get_odr_index(data); |
| j = mma8452_get_power_mode(data); |
| if (j < 0) |
| return j; |
| |
| return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[j][i], |
| ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0])); |
| } |
| |
| static ssize_t mma8452_show_os_ratio_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int i = mma8452_get_odr_index(data); |
| int j; |
| u16 val = 0; |
| size_t len = 0; |
| |
| for (j = 0; j < ARRAY_SIZE(mma8452_os_ratio); j++) { |
| if (val == mma8452_os_ratio[j][i]) |
| continue; |
| |
| val = mma8452_os_ratio[j][i]; |
| |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", val); |
| } |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail); |
| static IIO_DEVICE_ATTR(in_accel_scale_available, 0444, |
| mma8452_show_scale_avail, NULL, 0); |
| static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available, |
| 0444, mma8452_show_hp_cutoff_avail, NULL, 0); |
| static IIO_DEVICE_ATTR(in_accel_oversampling_ratio_available, 0444, |
| mma8452_show_os_ratio_avail, NULL, 0); |
| |
| static int mma8452_get_samp_freq_index(struct mma8452_data *data, |
| int val, int val2) |
| { |
| return mma8452_get_int_plus_micros_index(mma8452_samp_freq, |
| ARRAY_SIZE(mma8452_samp_freq), |
| val, val2); |
| } |
| |
| static int mma8452_get_scale_index(struct mma8452_data *data, int val, int val2) |
| { |
| return mma8452_get_int_plus_micros_index(data->chip_info->mma_scales, |
| ARRAY_SIZE(data->chip_info->mma_scales), val, val2); |
| } |
| |
| static int mma8452_get_hp_filter_index(struct mma8452_data *data, |
| int val, int val2) |
| { |
| int i, j; |
| |
| i = mma8452_get_odr_index(data); |
| j = mma8452_get_power_mode(data); |
| if (j < 0) |
| return j; |
| |
| return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[j][i], |
| ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0]), val, val2); |
| } |
| |
| static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz) |
| { |
| int j, i, ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF); |
| if (ret < 0) |
| return ret; |
| |
| i = mma8452_get_odr_index(data); |
| j = mma8452_get_power_mode(data); |
| if (j < 0) |
| return j; |
| |
| ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK; |
| *hz = mma8452_hp_filter_cutoff[j][i][ret][0]; |
| *uHz = mma8452_hp_filter_cutoff[j][i][ret][1]; |
| |
| return 0; |
| } |
| |
| static int mma8452_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| __be16 buffer[3]; |
| int i, ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->lock); |
| ret = mma8452_read(data, buffer); |
| mutex_unlock(&data->lock); |
| iio_device_release_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| *val = sign_extend32(be16_to_cpu( |
| buffer[chan->scan_index]) >> chan->scan_type.shift, |
| chan->scan_type.realbits - 1); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK; |
| *val = data->chip_info->mma_scales[i][0]; |
| *val2 = data->chip_info->mma_scales[i][1]; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| i = mma8452_get_odr_index(data); |
| *val = mma8452_samp_freq[i][0]; |
| *val2 = mma8452_samp_freq[i][1]; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_OFF_X + |
| chan->scan_index); |
| if (ret < 0) |
| return ret; |
| |
| *val = sign_extend32(ret, 7); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: |
| if (data->data_cfg & MMA8452_DATA_CFG_HPF_MASK) { |
| ret = mma8452_read_hp_filter(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } else { |
| *val = 0; |
| *val2 = 0; |
| } |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_OVERSAMPLING_RATIO: |
| ret = mma8452_get_power_mode(data); |
| if (ret < 0) |
| return ret; |
| |
| i = mma8452_get_odr_index(data); |
| |
| *val = mma8452_os_ratio[ret][i]; |
| return IIO_VAL_INT; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int mma8452_calculate_sleep(struct mma8452_data *data) |
| { |
| int ret, i = mma8452_get_odr_index(data); |
| |
| if (mma8452_samp_freq[i][0] > 0) |
| ret = 1000 / mma8452_samp_freq[i][0]; |
| else |
| ret = 1000; |
| |
| return ret == 0 ? 1 : ret; |
| } |
| |
| static int mma8452_standby(struct mma8452_data *data) |
| { |
| return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE); |
| } |
| |
| static int mma8452_active(struct mma8452_data *data) |
| { |
| return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| } |
| |
| /* returns >0 if active, 0 if in standby and <0 on error */ |
| static int mma8452_is_active(struct mma8452_data *data) |
| { |
| int reg; |
| |
| reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG1); |
| if (reg < 0) |
| return reg; |
| |
| return reg & MMA8452_CTRL_ACTIVE; |
| } |
| |
| static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val) |
| { |
| int ret; |
| int is_active; |
| |
| mutex_lock(&data->lock); |
| |
| is_active = mma8452_is_active(data); |
| if (is_active < 0) { |
| ret = is_active; |
| goto fail; |
| } |
| |
| /* config can only be changed when in standby */ |
| if (is_active > 0) { |
| ret = mma8452_standby(data); |
| if (ret < 0) |
| goto fail; |
| } |
| |
| ret = i2c_smbus_write_byte_data(data->client, reg, val); |
| if (ret < 0) |
| goto fail; |
| |
| if (is_active > 0) { |
| ret = mma8452_active(data); |
| if (ret < 0) |
| goto fail; |
| } |
| |
| ret = 0; |
| fail: |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode) |
| { |
| int reg; |
| |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_CTRL_REG2); |
| if (reg < 0) |
| return reg; |
| |
| reg &= ~MMA8452_CTRL_REG2_MODS_MASK; |
| reg |= mode << MMA8452_CTRL_REG2_MODS_SHIFT; |
| |
| return mma8452_change_config(data, MMA8452_CTRL_REG2, reg); |
| } |
| |
| /* returns >0 if in freefall mode, 0 if not or <0 if an error occurred */ |
| static int mma8452_freefall_mode_enabled(struct mma8452_data *data) |
| { |
| int val; |
| |
| val = i2c_smbus_read_byte_data(data->client, MMA8452_FF_MT_CFG); |
| if (val < 0) |
| return val; |
| |
| return !(val & MMA8452_FF_MT_CFG_OAE); |
| } |
| |
| static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state) |
| { |
| int val; |
| |
| if ((state && mma8452_freefall_mode_enabled(data)) || |
| (!state && !(mma8452_freefall_mode_enabled(data)))) |
| return 0; |
| |
| val = i2c_smbus_read_byte_data(data->client, MMA8452_FF_MT_CFG); |
| if (val < 0) |
| return val; |
| |
| if (state) { |
| val |= BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT); |
| val |= BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT); |
| val |= BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT); |
| val &= ~MMA8452_FF_MT_CFG_OAE; |
| } else { |
| val &= ~BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT); |
| val &= ~BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT); |
| val &= ~BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT); |
| val |= MMA8452_FF_MT_CFG_OAE; |
| } |
| |
| return mma8452_change_config(data, MMA8452_FF_MT_CFG, val); |
| } |
| |
| static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, |
| int val, int val2) |
| { |
| int i, reg; |
| |
| i = mma8452_get_hp_filter_index(data, val, val2); |
| if (i < 0) |
| return i; |
| |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_HP_FILTER_CUTOFF); |
| if (reg < 0) |
| return reg; |
| |
| reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK; |
| reg |= i; |
| |
| return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg); |
| } |
| |
| static int mma8452_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int i, ret; |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| i = mma8452_get_samp_freq_index(data, val, val2); |
| if (i < 0) { |
| ret = i; |
| break; |
| } |
| data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK; |
| data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT; |
| |
| data->sleep_val = mma8452_calculate_sleep(data); |
| |
| ret = mma8452_change_config(data, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| i = mma8452_get_scale_index(data, val, val2); |
| if (i < 0) { |
| ret = i; |
| break; |
| } |
| |
| data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK; |
| data->data_cfg |= i; |
| |
| ret = mma8452_change_config(data, MMA8452_DATA_CFG, |
| data->data_cfg); |
| break; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| if (val < -128 || val > 127) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| ret = mma8452_change_config(data, |
| MMA8452_OFF_X + chan->scan_index, |
| val); |
| break; |
| |
| case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: |
| if (val == 0 && val2 == 0) { |
| data->data_cfg &= ~MMA8452_DATA_CFG_HPF_MASK; |
| } else { |
| data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK; |
| ret = mma8452_set_hp_filter_frequency(data, val, val2); |
| if (ret < 0) |
| break; |
| } |
| |
| ret = mma8452_change_config(data, MMA8452_DATA_CFG, |
| data->data_cfg); |
| break; |
| |
| case IIO_CHAN_INFO_OVERSAMPLING_RATIO: |
| ret = mma8452_get_odr_index(data); |
| |
| for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) { |
| if (mma8452_os_ratio[i][ret] == val) { |
| ret = mma8452_set_power_mode(data, i); |
| break; |
| } |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| } |
| |
| static int mma8452_get_event_regs(struct mma8452_data *data, |
| const struct iio_chan_spec *chan, enum iio_event_direction dir, |
| const struct mma8452_event_regs **ev_reg) |
| { |
| if (!chan) |
| return -EINVAL; |
| |
| switch (chan->type) { |
| case IIO_ACCEL: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| if ((data->chip_info->all_events |
| & MMA8452_INT_TRANS) && |
| (data->chip_info->enabled_events |
| & MMA8452_INT_TRANS)) |
| *ev_reg = &trans_ev_regs; |
| else |
| *ev_reg = &ff_mt_ev_regs; |
| return 0; |
| case IIO_EV_DIR_FALLING: |
| *ev_reg = &ff_mt_ev_regs; |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_read_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret, us, power_mode; |
| const struct mma8452_event_regs *ev_regs; |
| |
| ret = mma8452_get_event_regs(data, chan, dir, &ev_regs); |
| if (ret) |
| return ret; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| ret = i2c_smbus_read_byte_data(data->client, ev_regs->ev_ths); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret & ev_regs->ev_ths_mask; |
| |
| return IIO_VAL_INT; |
| |
| case IIO_EV_INFO_PERIOD: |
| ret = i2c_smbus_read_byte_data(data->client, ev_regs->ev_count); |
| if (ret < 0) |
| return ret; |
| |
| power_mode = mma8452_get_power_mode(data); |
| if (power_mode < 0) |
| return power_mode; |
| |
| us = ret * mma8452_time_step_us[power_mode][ |
| mma8452_get_odr_index(data)]; |
| *val = us / USEC_PER_SEC; |
| *val2 = us % USEC_PER_SEC; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: |
| ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_CFG); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) { |
| *val = 0; |
| *val2 = 0; |
| } else { |
| ret = mma8452_read_hp_filter(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_write_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret, reg, steps; |
| const struct mma8452_event_regs *ev_regs; |
| |
| ret = mma8452_get_event_regs(data, chan, dir, &ev_regs); |
| if (ret) |
| return ret; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| if (val < 0 || val > ev_regs->ev_ths_mask) |
| return -EINVAL; |
| |
| return mma8452_change_config(data, ev_regs->ev_ths, val); |
| |
| case IIO_EV_INFO_PERIOD: |
| ret = mma8452_get_power_mode(data); |
| if (ret < 0) |
| return ret; |
| |
| steps = (val * USEC_PER_SEC + val2) / |
| mma8452_time_step_us[ret][ |
| mma8452_get_odr_index(data)]; |
| |
| if (steps < 0 || steps > 0xff) |
| return -EINVAL; |
| |
| return mma8452_change_config(data, ev_regs->ev_count, steps); |
| |
| case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_CFG); |
| if (reg < 0) |
| return reg; |
| |
| if (val == 0 && val2 == 0) { |
| reg |= MMA8452_TRANSIENT_CFG_HPF_BYP; |
| } else { |
| reg &= ~MMA8452_TRANSIENT_CFG_HPF_BYP; |
| ret = mma8452_set_hp_filter_frequency(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, reg); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret; |
| const struct mma8452_event_regs *ev_regs; |
| |
| ret = mma8452_get_event_regs(data, chan, dir, &ev_regs); |
| if (ret) |
| return ret; |
| |
| switch (dir) { |
| case IIO_EV_DIR_FALLING: |
| return mma8452_freefall_mode_enabled(data); |
| case IIO_EV_DIR_RISING: |
| ret = i2c_smbus_read_byte_data(data->client, |
| ev_regs->ev_cfg); |
| if (ret < 0) |
| return ret; |
| |
| return !!(ret & BIT(chan->scan_index + |
| ev_regs->ev_cfg_chan_shift)); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| int state) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int val, ret; |
| const struct mma8452_event_regs *ev_regs; |
| |
| ret = mma8452_get_event_regs(data, chan, dir, &ev_regs); |
| if (ret) |
| return ret; |
| |
| ret = mma8452_set_runtime_pm_state(data->client, state); |
| if (ret) |
| return ret; |
| |
| switch (dir) { |
| case IIO_EV_DIR_FALLING: |
| return mma8452_set_freefall_mode(data, state); |
| case IIO_EV_DIR_RISING: |
| val = i2c_smbus_read_byte_data(data->client, ev_regs->ev_cfg); |
| if (val < 0) |
| return val; |
| |
| if (state) { |
| if (mma8452_freefall_mode_enabled(data)) { |
| val &= ~BIT(idx_x + ev_regs->ev_cfg_chan_shift); |
| val &= ~BIT(idx_y + ev_regs->ev_cfg_chan_shift); |
| val &= ~BIT(idx_z + ev_regs->ev_cfg_chan_shift); |
| val |= MMA8452_FF_MT_CFG_OAE; |
| } |
| val |= BIT(chan->scan_index + |
| ev_regs->ev_cfg_chan_shift); |
| } else { |
| if (mma8452_freefall_mode_enabled(data)) |
| return 0; |
| |
| val &= ~BIT(chan->scan_index + |
| ev_regs->ev_cfg_chan_shift); |
| } |
| |
| val |= ev_regs->ev_cfg_ele; |
| |
| return mma8452_change_config(data, ev_regs->ev_cfg, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void mma8452_transient_interrupt(struct iio_dev *indio_dev) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| s64 ts = iio_get_time_ns(indio_dev); |
| int src; |
| |
| src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC); |
| if (src < 0) |
| return; |
| |
| if (src & MMA8452_TRANSIENT_SRC_XTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_RISING), |
| ts); |
| |
| if (src & MMA8452_TRANSIENT_SRC_YTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_RISING), |
| ts); |
| |
| if (src & MMA8452_TRANSIENT_SRC_ZTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_RISING), |
| ts); |
| } |
| |
| static irqreturn_t mma8452_interrupt(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret = IRQ_NONE; |
| int src; |
| |
| src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC); |
| if (src < 0) |
| return IRQ_NONE; |
| |
| if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY))) |
| return IRQ_NONE; |
| |
| if (src & MMA8452_INT_DRDY) { |
| iio_trigger_poll_chained(indio_dev->trig); |
| ret = IRQ_HANDLED; |
| } |
| |
| if (src & MMA8452_INT_FF_MT) { |
| if (mma8452_freefall_mode_enabled(data)) { |
| s64 ts = iio_get_time_ns(indio_dev); |
| |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, |
| IIO_MOD_X_AND_Y_AND_Z, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_FALLING), |
| ts); |
| } |
| ret = IRQ_HANDLED; |
| } |
| |
| if (src & MMA8452_INT_TRANS) { |
| mma8452_transient_interrupt(indio_dev); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t mma8452_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = mma8452_read(data, data->buffer.channels); |
| if (ret < 0) |
| goto done; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, |
| iio_get_time_ns(indio_dev)); |
| |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, |
| unsigned int reg, unsigned int writeval, |
| unsigned int *readval) |
| { |
| int ret; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| |
| if (reg > MMA8452_MAX_REG) |
| return -EINVAL; |
| |
| if (!readval) |
| return mma8452_change_config(data, reg, writeval); |
| |
| ret = i2c_smbus_read_byte_data(data->client, reg); |
| if (ret < 0) |
| return ret; |
| |
| *readval = ret; |
| |
| return 0; |
| } |
| |
| static const struct iio_event_spec mma8452_freefall_event[] = { |
| { |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD) | |
| BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) |
| }, |
| }; |
| |
| static const struct iio_event_spec mma8652_freefall_event[] = { |
| { |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD) |
| }, |
| }; |
| |
| static const struct iio_event_spec mma8452_transient_event[] = { |
| { |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD) | |
| BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) |
| }, |
| }; |
| |
| static const struct iio_event_spec mma8452_motion_event[] = { |
| { |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD) |
| }, |
| }; |
| |
| /* |
| * Threshold is configured in fixed 8G/127 steps regardless of |
| * currently selected scale for measurement. |
| */ |
| static IIO_CONST_ATTR_NAMED(accel_transient_scale, in_accel_scale, "0.617742"); |
| |
| static struct attribute *mma8452_event_attributes[] = { |
| &iio_const_attr_accel_transient_scale.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group mma8452_event_attribute_group = { |
| .attrs = mma8452_event_attributes, |
| }; |
| |
| #define MMA8452_FREEFALL_CHANNEL(modifier) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = modifier, \ |
| .scan_index = -1, \ |
| .event_spec = mma8452_freefall_event, \ |
| .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \ |
| } |
| |
| #define MMA8652_FREEFALL_CHANNEL(modifier) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = modifier, \ |
| .scan_index = -1, \ |
| .event_spec = mma8652_freefall_event, \ |
| .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \ |
| } |
| |
| #define MMA8452_CHANNEL(axis, idx, bits) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \ |
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = (bits), \ |
| .storagebits = 16, \ |
| .shift = 16 - (bits), \ |
| .endianness = IIO_BE, \ |
| }, \ |
| .event_spec = mma8452_transient_event, \ |
| .num_event_specs = ARRAY_SIZE(mma8452_transient_event), \ |
| } |
| |
| #define MMA8652_CHANNEL(axis, idx, bits) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = (bits), \ |
| .storagebits = 16, \ |
| .shift = 16 - (bits), \ |
| .endianness = IIO_BE, \ |
| }, \ |
| .event_spec = mma8452_motion_event, \ |
| .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \ |
| } |
| |
| static const struct iio_chan_spec mma8451_channels[] = { |
| MMA8452_CHANNEL(X, idx_x, 14), |
| MMA8452_CHANNEL(Y, idx_y, 14), |
| MMA8452_CHANNEL(Z, idx_z, 14), |
| IIO_CHAN_SOFT_TIMESTAMP(idx_ts), |
| MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), |
| }; |
| |
| static const struct iio_chan_spec mma8452_channels[] = { |
| MMA8452_CHANNEL(X, idx_x, 12), |
| MMA8452_CHANNEL(Y, idx_y, 12), |
| MMA8452_CHANNEL(Z, idx_z, 12), |
| IIO_CHAN_SOFT_TIMESTAMP(idx_ts), |
| MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), |
| }; |
| |
| static const struct iio_chan_spec mma8453_channels[] = { |
| MMA8452_CHANNEL(X, idx_x, 10), |
| MMA8452_CHANNEL(Y, idx_y, 10), |
| MMA8452_CHANNEL(Z, idx_z, 10), |
| IIO_CHAN_SOFT_TIMESTAMP(idx_ts), |
| MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), |
| }; |
| |
| static const struct iio_chan_spec mma8652_channels[] = { |
| MMA8652_CHANNEL(X, idx_x, 12), |
| MMA8652_CHANNEL(Y, idx_y, 12), |
| MMA8652_CHANNEL(Z, idx_z, 12), |
| IIO_CHAN_SOFT_TIMESTAMP(idx_ts), |
| MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), |
| }; |
| |
| static const struct iio_chan_spec mma8653_channels[] = { |
| MMA8652_CHANNEL(X, idx_x, 10), |
| MMA8652_CHANNEL(Y, idx_y, 10), |
| MMA8652_CHANNEL(Z, idx_z, 10), |
| IIO_CHAN_SOFT_TIMESTAMP(idx_ts), |
| MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), |
| }; |
| |
| enum { |
| mma8451, |
| mma8452, |
| mma8453, |
| mma8652, |
| mma8653, |
| fxls8471, |
| }; |
| |
| static const struct mma_chip_info mma_chip_info_table[] = { |
| [mma8451] = { |
| .chip_id = MMA8451_DEVICE_ID, |
| .channels = mma8451_channels, |
| .num_channels = ARRAY_SIZE(mma8451_channels), |
| /* |
| * Hardware has fullscale of -2G, -4G, -8G corresponding to |
| * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10 |
| * bit. |
| * The userspace interface uses m/s^2 and we declare micro units |
| * So scale factor for 12 bit here is given by: |
| * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 |
| */ |
| .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, |
| /* |
| * Although we enable the interrupt sources once and for |
| * all here the event detection itself is not enabled until |
| * userspace asks for it by mma8452_write_event_config() |
| */ |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| }, |
| [mma8452] = { |
| .chip_id = MMA8452_DEVICE_ID, |
| .channels = mma8452_channels, |
| .num_channels = ARRAY_SIZE(mma8452_channels), |
| .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, |
| /* |
| * Although we enable the interrupt sources once and for |
| * all here the event detection itself is not enabled until |
| * userspace asks for it by mma8452_write_event_config() |
| */ |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| }, |
| [mma8453] = { |
| .chip_id = MMA8453_DEVICE_ID, |
| .channels = mma8453_channels, |
| .num_channels = ARRAY_SIZE(mma8453_channels), |
| .mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} }, |
| /* |
| * Although we enable the interrupt sources once and for |
| * all here the event detection itself is not enabled until |
| * userspace asks for it by mma8452_write_event_config() |
| */ |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| }, |
| [mma8652] = { |
| .chip_id = MMA8652_DEVICE_ID, |
| .channels = mma8652_channels, |
| .num_channels = ARRAY_SIZE(mma8652_channels), |
| .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_FF_MT, |
| }, |
| [mma8653] = { |
| .chip_id = MMA8653_DEVICE_ID, |
| .channels = mma8653_channels, |
| .num_channels = ARRAY_SIZE(mma8653_channels), |
| .mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} }, |
| /* |
| * Although we enable the interrupt sources once and for |
| * all here the event detection itself is not enabled until |
| * userspace asks for it by mma8452_write_event_config() |
| */ |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_FF_MT, |
| }, |
| [fxls8471] = { |
| .chip_id = FXLS8471_DEVICE_ID, |
| .channels = mma8451_channels, |
| .num_channels = ARRAY_SIZE(mma8451_channels), |
| .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, |
| /* |
| * Although we enable the interrupt sources once and for |
| * all here the event detection itself is not enabled until |
| * userspace asks for it by mma8452_write_event_config() |
| */ |
| .all_events = MMA8452_INT_DRDY | |
| MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| .enabled_events = MMA8452_INT_TRANS | |
| MMA8452_INT_FF_MT, |
| }, |
| }; |
| |
| static struct attribute *mma8452_attributes[] = { |
| &iio_dev_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_oversampling_ratio_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group mma8452_group = { |
| .attrs = mma8452_attributes, |
| }; |
| |
| static const struct iio_info mma8452_info = { |
| .attrs = &mma8452_group, |
| .read_raw = &mma8452_read_raw, |
| .write_raw = &mma8452_write_raw, |
| .event_attrs = &mma8452_event_attribute_group, |
| .read_event_value = &mma8452_read_event_value, |
| .write_event_value = &mma8452_write_event_value, |
| .read_event_config = &mma8452_read_event_config, |
| .write_event_config = &mma8452_write_event_config, |
| .debugfs_reg_access = &mma8452_reg_access_dbg, |
| }; |
| |
| static const unsigned long mma8452_scan_masks[] = {0x7, 0}; |
| |
| static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig, |
| bool state) |
| { |
| struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int reg, ret; |
| |
| ret = mma8452_set_runtime_pm_state(data->client, state); |
| if (ret) |
| return ret; |
| |
| reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4); |
| if (reg < 0) |
| return reg; |
| |
| if (state) |
| reg |= MMA8452_INT_DRDY; |
| else |
| reg &= ~MMA8452_INT_DRDY; |
| |
| return mma8452_change_config(data, MMA8452_CTRL_REG4, reg); |
| } |
| |
| static const struct iio_trigger_ops mma8452_trigger_ops = { |
| .set_trigger_state = mma8452_data_rdy_trigger_set_state, |
| .validate_device = iio_trigger_validate_own_device, |
| }; |
| |
| static int mma8452_trigger_setup(struct iio_dev *indio_dev) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| struct iio_trigger *trig; |
| int ret; |
| |
| trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d", |
| indio_dev->name, |
| iio_device_id(indio_dev)); |
| if (!trig) |
| return -ENOMEM; |
| |
| trig->ops = &mma8452_trigger_ops; |
| iio_trigger_set_drvdata(trig, indio_dev); |
| |
| ret = iio_trigger_register(trig); |
| if (ret) |
| return ret; |
| |
| indio_dev->trig = iio_trigger_get(trig); |
| |
| return 0; |
| } |
| |
| static void mma8452_trigger_cleanup(struct iio_dev *indio_dev) |
| { |
| if (indio_dev->trig) |
| iio_trigger_unregister(indio_dev->trig); |
| } |
| |
| static int mma8452_reset(struct i2c_client *client) |
| { |
| int i; |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, |
| MMA8452_CTRL_REG2_RST); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < 10; i++) { |
| usleep_range(100, 200); |
| ret = i2c_smbus_read_byte_data(client, MMA8452_CTRL_REG2); |
| if (ret == -EIO) |
| continue; /* I2C comm reset */ |
| if (ret < 0) |
| return ret; |
| if (!(ret & MMA8452_CTRL_REG2_RST)) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static const struct of_device_id mma8452_dt_ids[] = { |
| { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, |
| { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, |
| { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, |
| { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, |
| { .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] }, |
| { .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mma8452_dt_ids); |
| |
| static int mma8452_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mma8452_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| const struct of_device_id *match; |
| |
| match = of_match_device(mma8452_dt_ids, &client->dev); |
| if (!match) { |
| dev_err(&client->dev, "unknown device model\n"); |
| return -ENODEV; |
| } |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->client = client; |
| mutex_init(&data->lock); |
| data->chip_info = match->data; |
| |
| data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); |
| if (IS_ERR(data->vdd_reg)) |
| return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg), |
| "failed to get VDD regulator!\n"); |
| |
| data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); |
| if (IS_ERR(data->vddio_reg)) |
| return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg), |
| "failed to get VDDIO regulator!\n"); |
| |
| ret = regulator_enable(data->vdd_reg); |
| if (ret) { |
| dev_err(&client->dev, "failed to enable VDD regulator!\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(data->vddio_reg); |
| if (ret) { |
| dev_err(&client->dev, "failed to enable VDDIO regulator!\n"); |
| goto disable_regulator_vdd; |
| } |
| |
| ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| switch (ret) { |
| case MMA8451_DEVICE_ID: |
| case MMA8452_DEVICE_ID: |
| case MMA8453_DEVICE_ID: |
| case MMA8652_DEVICE_ID: |
| case MMA8653_DEVICE_ID: |
| case FXLS8471_DEVICE_ID: |
| if (ret == data->chip_info->chip_id) |
| break; |
| fallthrough; |
| default: |
| ret = -ENODEV; |
| goto disable_regulators; |
| } |
| |
| dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n", |
| match->compatible, data->chip_info->chip_id); |
| |
| i2c_set_clientdata(client, indio_dev); |
| indio_dev->info = &mma8452_info; |
| indio_dev->name = id->name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = data->chip_info->channels; |
| indio_dev->num_channels = data->chip_info->num_channels; |
| indio_dev->available_scan_masks = mma8452_scan_masks; |
| |
| ret = mma8452_reset(client); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| data->data_cfg = MMA8452_DATA_CFG_FS_2G; |
| ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG, |
| data->data_cfg); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| /* |
| * By default set transient threshold to max to avoid events if |
| * enabling without configuring threshold. |
| */ |
| ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS, |
| MMA8452_TRANSIENT_THS_MASK); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| if (client->irq) { |
| int irq2; |
| |
| irq2 = of_irq_get_byname(client->dev.of_node, "INT2"); |
| |
| if (irq2 == client->irq) { |
| dev_dbg(&client->dev, "using interrupt line INT2\n"); |
| } else { |
| ret = i2c_smbus_write_byte_data(client, |
| MMA8452_CTRL_REG5, |
| data->chip_info->all_events); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| dev_dbg(&client->dev, "using interrupt line INT1\n"); |
| } |
| |
| ret = i2c_smbus_write_byte_data(client, |
| MMA8452_CTRL_REG4, |
| data->chip_info->enabled_events); |
| if (ret < 0) |
| goto disable_regulators; |
| |
| ret = mma8452_trigger_setup(indio_dev); |
| if (ret < 0) |
| goto disable_regulators; |
| } |
| |
| data->ctrl_reg1 = MMA8452_CTRL_ACTIVE | |
| (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT); |
| |
| data->sleep_val = mma8452_calculate_sleep(data); |
| |
| ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| if (ret < 0) |
| goto trigger_cleanup; |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| mma8452_trigger_handler, NULL); |
| if (ret < 0) |
| goto trigger_cleanup; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(&client->dev, |
| client->irq, |
| NULL, mma8452_interrupt, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| client->name, indio_dev); |
| if (ret) |
| goto buffer_cleanup; |
| } |
| |
| ret = pm_runtime_set_active(&client->dev); |
| if (ret < 0) |
| goto buffer_cleanup; |
| |
| pm_runtime_enable(&client->dev); |
| pm_runtime_set_autosuspend_delay(&client->dev, |
| MMA8452_AUTO_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(&client->dev); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) |
| goto buffer_cleanup; |
| |
| ret = mma8452_set_freefall_mode(data, false); |
| if (ret < 0) |
| goto unregister_device; |
| |
| return 0; |
| |
| unregister_device: |
| iio_device_unregister(indio_dev); |
| |
| buffer_cleanup: |
| iio_triggered_buffer_cleanup(indio_dev); |
| |
| trigger_cleanup: |
| mma8452_trigger_cleanup(indio_dev); |
| |
| disable_regulators: |
| regulator_disable(data->vddio_reg); |
| |
| disable_regulator_vdd: |
| regulator_disable(data->vdd_reg); |
| |
| return ret; |
| } |
| |
| static int mma8452_remove(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| |
| iio_triggered_buffer_cleanup(indio_dev); |
| mma8452_trigger_cleanup(indio_dev); |
| mma8452_standby(iio_priv(indio_dev)); |
| |
| regulator_disable(data->vddio_reg); |
| regulator_disable(data->vdd_reg); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int mma8452_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->lock); |
| ret = mma8452_standby(data); |
| mutex_unlock(&data->lock); |
| if (ret < 0) { |
| dev_err(&data->client->dev, "powering off device failed\n"); |
| return -EAGAIN; |
| } |
| |
| ret = regulator_disable(data->vddio_reg); |
| if (ret) { |
| dev_err(dev, "failed to disable VDDIO regulator\n"); |
| return ret; |
| } |
| |
| ret = regulator_disable(data->vdd_reg); |
| if (ret) { |
| dev_err(dev, "failed to disable VDD regulator\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int mma8452_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret, sleep_val; |
| |
| ret = regulator_enable(data->vdd_reg); |
| if (ret) { |
| dev_err(dev, "failed to enable VDD regulator\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(data->vddio_reg); |
| if (ret) { |
| dev_err(dev, "failed to enable VDDIO regulator\n"); |
| regulator_disable(data->vdd_reg); |
| return ret; |
| } |
| |
| ret = mma8452_active(data); |
| if (ret < 0) |
| goto runtime_resume_failed; |
| |
| ret = mma8452_get_odr_index(data); |
| sleep_val = 1000 / mma8452_samp_freq[ret][0]; |
| if (sleep_val < 20) |
| usleep_range(sleep_val * 1000, 20000); |
| else |
| msleep_interruptible(sleep_val); |
| |
| return 0; |
| |
| runtime_resume_failed: |
| regulator_disable(data->vddio_reg); |
| regulator_disable(data->vdd_reg); |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct dev_pm_ops mma8452_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(mma8452_runtime_suspend, |
| mma8452_runtime_resume, NULL) |
| }; |
| |
| static const struct i2c_device_id mma8452_id[] = { |
| { "mma8451", mma8451 }, |
| { "mma8452", mma8452 }, |
| { "mma8453", mma8453 }, |
| { "mma8652", mma8652 }, |
| { "mma8653", mma8653 }, |
| { "fxls8471", fxls8471 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mma8452_id); |
| |
| static struct i2c_driver mma8452_driver = { |
| .driver = { |
| .name = "mma8452", |
| .of_match_table = of_match_ptr(mma8452_dt_ids), |
| .pm = &mma8452_pm_ops, |
| }, |
| .probe = mma8452_probe, |
| .remove = mma8452_remove, |
| .id_table = mma8452_id, |
| }; |
| module_i2c_driver(mma8452_driver); |
| |
| MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); |
| MODULE_DESCRIPTION("Freescale / NXP MMA8452 accelerometer driver"); |
| MODULE_LICENSE("GPL"); |