| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Apple GPIO controller |
| |
| maintainers: |
| - Mark Kettenis <kettenis@openbsd.org> |
| |
| description: | |
| The Apple GPIO controller is a simple combined pin and GPIO |
| controller present on Apple ARM SoC platforms, including various |
| iPhone and iPad devices and the "Apple Silicon" Macs. |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - apple,t8103-pinctrl |
| - apple,t6000-pinctrl |
| - const: apple,pinctrl |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| gpio-controller: true |
| |
| '#gpio-cells': |
| const: 2 |
| |
| gpio-ranges: |
| maxItems: 1 |
| |
| apple,npins: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: The number of pins in this GPIO controller. |
| |
| interrupts: |
| description: One interrupt for each of the (up to 7) interrupt |
| groups supported by the controller sorted by interrupt group |
| number in ascending order. |
| minItems: 1 |
| maxItems: 7 |
| |
| interrupt-controller: true |
| |
| '#interrupt-cells': |
| const: 2 |
| |
| power-domains: |
| maxItems: 1 |
| |
| patternProperties: |
| '-pins$': |
| type: object |
| $ref: pinmux-node.yaml# |
| |
| properties: |
| pinmux: |
| description: |
| Values are constructed from pin number and alternate function |
| configuration number using the APPLE_PINMUX() helper macro |
| defined in include/dt-bindings/pinctrl/apple.h. |
| |
| required: |
| - pinmux |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - gpio-controller |
| - '#gpio-cells' |
| - gpio-ranges |
| - apple,npins |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/apple-aic.h> |
| #include <dt-bindings/pinctrl/apple.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| pinctrl: pinctrl@23c100000 { |
| compatible = "apple,t8103-pinctrl", "apple,pinctrl"; |
| reg = <0x2 0x3c100000 0x0 0x100000>; |
| clocks = <&gpio_clk>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinctrl 0 0 212>; |
| apple,npins = <212>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&aic>; |
| interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, |
| <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; |
| |
| pcie_pins: pcie-pins { |
| pinmux = <APPLE_PINMUX(150, 1)>, |
| <APPLE_PINMUX(151, 1)>, |
| <APPLE_PINMUX(32, 1)>; |
| }; |
| }; |
| }; |