| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: MIPI DSI to eDP Video Format Converter Device Tree Bindings |
| |
| maintainers: |
| - Nicolas Boichat <drinkcat@chromium.org> |
| - Enric Balletbo i Serra <enric.balletbo@collabora.com> |
| |
| description: | |
| The PS8640 is a low power MIPI-to-eDP video format converter supporting |
| mobile devices with embedded panel resolutions up to 2048 x 1536. The |
| device accepts a single channel of MIPI DSI v1.1, with up to four lanes |
| plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The |
| device outputs eDP v1.4, one or two lanes, at a link rate of up to |
| 3.24Gbit/sec per lane. |
| |
| properties: |
| compatible: |
| const: parade,ps8640 |
| |
| reg: |
| maxItems: 1 |
| description: Base I2C address of the device. |
| |
| powerdown-gpios: |
| maxItems: 1 |
| description: GPIO connected to active low powerdown. |
| |
| reset-gpios: |
| maxItems: 1 |
| description: GPIO connected to active low reset. |
| |
| vdd12-supply: |
| description: Regulator for 1.2V digital core power. |
| |
| vdd33-supply: |
| description: Regulator for 3.3V digital core power. |
| |
| aux-bus: |
| $ref: /schemas/display/dp-aux-bus.yaml# |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Video port for DSI input |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Video port for eDP output (panel or connector). |
| |
| required: |
| - port@0 |
| |
| required: |
| - compatible |
| - reg |
| - powerdown-gpios |
| - reset-gpios |
| - vdd12-supply |
| - vdd33-supply |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ps8640: edp-bridge@18 { |
| compatible = "parade,ps8640"; |
| reg = <0x18>; |
| powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; |
| reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; |
| vdd12-supply = <&ps8640_fixed_1v2>; |
| vdd33-supply = <&mt6397_vgp2_reg>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| ps8640_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| ps8640_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| |
| aux-bus { |
| panel { |
| compatible = "boe,nv133fhm-n62"; |
| power-supply = <&pp3300_dx_edp>; |
| backlight = <&backlight>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&ps8640_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |