| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* Copyright 2014-2016 Freescale Semiconductor Inc. |
| * Copyright 2016-2017 NXP |
| */ |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/etherdevice.h> |
| #include <linux/of_net.h> |
| #include <linux/interrupt.h> |
| #include <linux/msi.h> |
| #include <linux/kthread.h> |
| #include <linux/iommu.h> |
| #include <linux/net_tstamp.h> |
| #include <linux/fsl/mc.h> |
| #include <linux/bpf.h> |
| #include <linux/bpf_trace.h> |
| #include <net/sock.h> |
| |
| #include "dpaa2-eth.h" |
| |
| /* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files |
| * using trace events only need to #include <trace/events/sched.h> |
| */ |
| #define CREATE_TRACE_POINTS |
| #include "dpaa2-eth-trace.h" |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Freescale Semiconductor, Inc"); |
| MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver"); |
| |
| static void *dpaa2_iova_to_virt(struct iommu_domain *domain, |
| dma_addr_t iova_addr) |
| { |
| phys_addr_t phys_addr; |
| |
| phys_addr = domain ? iommu_iova_to_phys(domain, iova_addr) : iova_addr; |
| |
| return phys_to_virt(phys_addr); |
| } |
| |
| static void validate_rx_csum(struct dpaa2_eth_priv *priv, |
| u32 fd_status, |
| struct sk_buff *skb) |
| { |
| skb_checksum_none_assert(skb); |
| |
| /* HW checksum validation is disabled, nothing to do here */ |
| if (!(priv->net_dev->features & NETIF_F_RXCSUM)) |
| return; |
| |
| /* Read checksum validation bits */ |
| if (!((fd_status & DPAA2_FAS_L3CV) && |
| (fd_status & DPAA2_FAS_L4CV))) |
| return; |
| |
| /* Inform the stack there's no need to compute L3/L4 csum anymore */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| |
| /* Free a received FD. |
| * Not to be used for Tx conf FDs or on any other paths. |
| */ |
| static void free_rx_fd(struct dpaa2_eth_priv *priv, |
| const struct dpaa2_fd *fd, |
| void *vaddr) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| dma_addr_t addr = dpaa2_fd_get_addr(fd); |
| u8 fd_format = dpaa2_fd_get_format(fd); |
| struct dpaa2_sg_entry *sgt; |
| void *sg_vaddr; |
| int i; |
| |
| /* If single buffer frame, just free the data buffer */ |
| if (fd_format == dpaa2_fd_single) |
| goto free_buf; |
| else if (fd_format != dpaa2_fd_sg) |
| /* We don't support any other format */ |
| return; |
| |
| /* For S/G frames, we first need to free all SG entries |
| * except the first one, which was taken care of already |
| */ |
| sgt = vaddr + dpaa2_fd_get_offset(fd); |
| for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { |
| addr = dpaa2_sg_get_addr(&sgt[i]); |
| sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr); |
| dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| |
| skb_free_frag(sg_vaddr); |
| if (dpaa2_sg_is_final(&sgt[i])) |
| break; |
| } |
| |
| free_buf: |
| skb_free_frag(vaddr); |
| } |
| |
| /* Build a linear skb based on a single-buffer frame descriptor */ |
| static struct sk_buff *build_linear_skb(struct dpaa2_eth_channel *ch, |
| const struct dpaa2_fd *fd, |
| void *fd_vaddr) |
| { |
| struct sk_buff *skb = NULL; |
| u16 fd_offset = dpaa2_fd_get_offset(fd); |
| u32 fd_length = dpaa2_fd_get_len(fd); |
| |
| ch->buf_count--; |
| |
| skb = build_skb(fd_vaddr, DPAA2_ETH_SKB_SIZE); |
| if (unlikely(!skb)) |
| return NULL; |
| |
| skb_reserve(skb, fd_offset); |
| skb_put(skb, fd_length); |
| |
| return skb; |
| } |
| |
| /* Build a non linear (fragmented) skb based on a S/G table */ |
| static struct sk_buff *build_frag_skb(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, |
| struct dpaa2_sg_entry *sgt) |
| { |
| struct sk_buff *skb = NULL; |
| struct device *dev = priv->net_dev->dev.parent; |
| void *sg_vaddr; |
| dma_addr_t sg_addr; |
| u16 sg_offset; |
| u32 sg_length; |
| struct page *page, *head_page; |
| int page_offset; |
| int i; |
| |
| for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { |
| struct dpaa2_sg_entry *sge = &sgt[i]; |
| |
| /* NOTE: We only support SG entries in dpaa2_sg_single format, |
| * but this is the only format we may receive from HW anyway |
| */ |
| |
| /* Get the address and length from the S/G entry */ |
| sg_addr = dpaa2_sg_get_addr(sge); |
| sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr); |
| dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| |
| sg_length = dpaa2_sg_get_len(sge); |
| |
| if (i == 0) { |
| /* We build the skb around the first data buffer */ |
| skb = build_skb(sg_vaddr, DPAA2_ETH_SKB_SIZE); |
| if (unlikely(!skb)) { |
| /* Free the first SG entry now, since we already |
| * unmapped it and obtained the virtual address |
| */ |
| skb_free_frag(sg_vaddr); |
| |
| /* We still need to subtract the buffers used |
| * by this FD from our software counter |
| */ |
| while (!dpaa2_sg_is_final(&sgt[i]) && |
| i < DPAA2_ETH_MAX_SG_ENTRIES) |
| i++; |
| break; |
| } |
| |
| sg_offset = dpaa2_sg_get_offset(sge); |
| skb_reserve(skb, sg_offset); |
| skb_put(skb, sg_length); |
| } else { |
| /* Rest of the data buffers are stored as skb frags */ |
| page = virt_to_page(sg_vaddr); |
| head_page = virt_to_head_page(sg_vaddr); |
| |
| /* Offset in page (which may be compound). |
| * Data in subsequent SG entries is stored from the |
| * beginning of the buffer, so we don't need to add the |
| * sg_offset. |
| */ |
| page_offset = ((unsigned long)sg_vaddr & |
| (PAGE_SIZE - 1)) + |
| (page_address(page) - page_address(head_page)); |
| |
| skb_add_rx_frag(skb, i - 1, head_page, page_offset, |
| sg_length, DPAA2_ETH_RX_BUF_SIZE); |
| } |
| |
| if (dpaa2_sg_is_final(sge)) |
| break; |
| } |
| |
| WARN_ONCE(i == DPAA2_ETH_MAX_SG_ENTRIES, "Final bit not set in SGT"); |
| |
| /* Count all data buffers + SG table buffer */ |
| ch->buf_count -= i + 2; |
| |
| return skb; |
| } |
| |
| static u32 run_xdp(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, |
| struct dpaa2_fd *fd, void *vaddr) |
| { |
| struct bpf_prog *xdp_prog; |
| struct xdp_buff xdp; |
| u32 xdp_act = XDP_PASS; |
| |
| rcu_read_lock(); |
| |
| xdp_prog = READ_ONCE(ch->xdp.prog); |
| if (!xdp_prog) |
| goto out; |
| |
| xdp.data = vaddr + dpaa2_fd_get_offset(fd); |
| xdp.data_end = xdp.data + dpaa2_fd_get_len(fd); |
| xdp.data_hard_start = xdp.data; |
| xdp_set_data_meta_invalid(&xdp); |
| |
| xdp_act = bpf_prog_run_xdp(xdp_prog, &xdp); |
| |
| switch (xdp_act) { |
| case XDP_PASS: |
| break; |
| default: |
| bpf_warn_invalid_xdp_action(xdp_act); |
| case XDP_ABORTED: |
| trace_xdp_exception(priv->net_dev, xdp_prog, xdp_act); |
| case XDP_DROP: |
| ch->buf_count--; |
| free_rx_fd(priv, fd, vaddr); |
| break; |
| } |
| |
| out: |
| rcu_read_unlock(); |
| return xdp_act; |
| } |
| |
| /* Main Rx frame processing routine */ |
| static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, |
| const struct dpaa2_fd *fd, |
| struct dpaa2_eth_fq *fq) |
| { |
| dma_addr_t addr = dpaa2_fd_get_addr(fd); |
| u8 fd_format = dpaa2_fd_get_format(fd); |
| void *vaddr; |
| struct sk_buff *skb; |
| struct rtnl_link_stats64 *percpu_stats; |
| struct dpaa2_eth_drv_stats *percpu_extras; |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpaa2_fas *fas; |
| void *buf_data; |
| u32 status = 0; |
| u32 xdp_act; |
| |
| /* Tracing point */ |
| trace_dpaa2_rx_fd(priv->net_dev, fd); |
| |
| vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr); |
| dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, DMA_FROM_DEVICE); |
| |
| fas = dpaa2_get_fas(vaddr, false); |
| prefetch(fas); |
| buf_data = vaddr + dpaa2_fd_get_offset(fd); |
| prefetch(buf_data); |
| |
| percpu_stats = this_cpu_ptr(priv->percpu_stats); |
| percpu_extras = this_cpu_ptr(priv->percpu_extras); |
| |
| if (fd_format == dpaa2_fd_single) { |
| xdp_act = run_xdp(priv, ch, (struct dpaa2_fd *)fd, vaddr); |
| if (xdp_act != XDP_PASS) { |
| percpu_stats->rx_packets++; |
| percpu_stats->rx_bytes += dpaa2_fd_get_len(fd); |
| return; |
| } |
| |
| skb = build_linear_skb(ch, fd, vaddr); |
| } else if (fd_format == dpaa2_fd_sg) { |
| WARN_ON(priv->xdp_prog); |
| |
| skb = build_frag_skb(priv, ch, buf_data); |
| skb_free_frag(vaddr); |
| percpu_extras->rx_sg_frames++; |
| percpu_extras->rx_sg_bytes += dpaa2_fd_get_len(fd); |
| } else { |
| /* We don't support any other format */ |
| goto err_frame_format; |
| } |
| |
| if (unlikely(!skb)) |
| goto err_build_skb; |
| |
| prefetch(skb->data); |
| |
| /* Get the timestamp value */ |
| if (priv->rx_tstamp) { |
| struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); |
| __le64 *ts = dpaa2_get_ts(vaddr, false); |
| u64 ns; |
| |
| memset(shhwtstamps, 0, sizeof(*shhwtstamps)); |
| |
| ns = DPAA2_PTP_CLK_PERIOD_NS * le64_to_cpup(ts); |
| shhwtstamps->hwtstamp = ns_to_ktime(ns); |
| } |
| |
| /* Check if we need to validate the L4 csum */ |
| if (likely(dpaa2_fd_get_frc(fd) & DPAA2_FD_FRC_FASV)) { |
| status = le32_to_cpu(fas->status); |
| validate_rx_csum(priv, status, skb); |
| } |
| |
| skb->protocol = eth_type_trans(skb, priv->net_dev); |
| skb_record_rx_queue(skb, fq->flowid); |
| |
| percpu_stats->rx_packets++; |
| percpu_stats->rx_bytes += dpaa2_fd_get_len(fd); |
| |
| napi_gro_receive(&ch->napi, skb); |
| |
| return; |
| |
| err_build_skb: |
| free_rx_fd(priv, fd, vaddr); |
| err_frame_format: |
| percpu_stats->rx_dropped++; |
| } |
| |
| /* Consume all frames pull-dequeued into the store. This is the simplest way to |
| * make sure we don't accidentally issue another volatile dequeue which would |
| * overwrite (leak) frames already in the store. |
| * |
| * Observance of NAPI budget is not our concern, leaving that to the caller. |
| */ |
| static int consume_frames(struct dpaa2_eth_channel *ch, |
| struct dpaa2_eth_fq **src) |
| { |
| struct dpaa2_eth_priv *priv = ch->priv; |
| struct dpaa2_eth_fq *fq = NULL; |
| struct dpaa2_dq *dq; |
| const struct dpaa2_fd *fd; |
| int cleaned = 0; |
| int is_last; |
| |
| do { |
| dq = dpaa2_io_store_next(ch->store, &is_last); |
| if (unlikely(!dq)) { |
| /* If we're here, we *must* have placed a |
| * volatile dequeue comnmand, so keep reading through |
| * the store until we get some sort of valid response |
| * token (either a valid frame or an "empty dequeue") |
| */ |
| continue; |
| } |
| |
| fd = dpaa2_dq_fd(dq); |
| fq = (struct dpaa2_eth_fq *)(uintptr_t)dpaa2_dq_fqd_ctx(dq); |
| |
| fq->consume(priv, ch, fd, fq); |
| cleaned++; |
| } while (!is_last); |
| |
| if (!cleaned) |
| return 0; |
| |
| fq->stats.frames += cleaned; |
| ch->stats.frames += cleaned; |
| |
| /* A dequeue operation only pulls frames from a single queue |
| * into the store. Return the frame queue as an out param. |
| */ |
| if (src) |
| *src = fq; |
| |
| return cleaned; |
| } |
| |
| /* Configure the egress frame annotation for timestamp update */ |
| static void enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) |
| { |
| struct dpaa2_faead *faead; |
| u32 ctrl, frc; |
| |
| /* Mark the egress frame annotation area as valid */ |
| frc = dpaa2_fd_get_frc(fd); |
| dpaa2_fd_set_frc(fd, frc | DPAA2_FD_FRC_FAEADV); |
| |
| /* Set hardware annotation size */ |
| ctrl = dpaa2_fd_get_ctrl(fd); |
| dpaa2_fd_set_ctrl(fd, ctrl | DPAA2_FD_CTRL_ASAL); |
| |
| /* enable UPD (update prepanded data) bit in FAEAD field of |
| * hardware frame annotation area |
| */ |
| ctrl = DPAA2_FAEAD_A2V | DPAA2_FAEAD_UPDV | DPAA2_FAEAD_UPD; |
| faead = dpaa2_get_faead(buf_start, true); |
| faead->ctrl = cpu_to_le32(ctrl); |
| } |
| |
| /* Create a frame descriptor based on a fragmented skb */ |
| static int build_sg_fd(struct dpaa2_eth_priv *priv, |
| struct sk_buff *skb, |
| struct dpaa2_fd *fd) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| void *sgt_buf = NULL; |
| dma_addr_t addr; |
| int nr_frags = skb_shinfo(skb)->nr_frags; |
| struct dpaa2_sg_entry *sgt; |
| int i, err; |
| int sgt_buf_size; |
| struct scatterlist *scl, *crt_scl; |
| int num_sg; |
| int num_dma_bufs; |
| struct dpaa2_eth_swa *swa; |
| |
| /* Create and map scatterlist. |
| * We don't advertise NETIF_F_FRAGLIST, so skb_to_sgvec() will not have |
| * to go beyond nr_frags+1. |
| * Note: We don't support chained scatterlists |
| */ |
| if (unlikely(PAGE_SIZE / sizeof(struct scatterlist) < nr_frags + 1)) |
| return -EINVAL; |
| |
| scl = kcalloc(nr_frags + 1, sizeof(struct scatterlist), GFP_ATOMIC); |
| if (unlikely(!scl)) |
| return -ENOMEM; |
| |
| sg_init_table(scl, nr_frags + 1); |
| num_sg = skb_to_sgvec(skb, scl, 0, skb->len); |
| num_dma_bufs = dma_map_sg(dev, scl, num_sg, DMA_BIDIRECTIONAL); |
| if (unlikely(!num_dma_bufs)) { |
| err = -ENOMEM; |
| goto dma_map_sg_failed; |
| } |
| |
| /* Prepare the HW SGT structure */ |
| sgt_buf_size = priv->tx_data_offset + |
| sizeof(struct dpaa2_sg_entry) * num_dma_bufs; |
| sgt_buf = netdev_alloc_frag(sgt_buf_size + DPAA2_ETH_TX_BUF_ALIGN); |
| if (unlikely(!sgt_buf)) { |
| err = -ENOMEM; |
| goto sgt_buf_alloc_failed; |
| } |
| sgt_buf = PTR_ALIGN(sgt_buf, DPAA2_ETH_TX_BUF_ALIGN); |
| memset(sgt_buf, 0, sgt_buf_size); |
| |
| sgt = (struct dpaa2_sg_entry *)(sgt_buf + priv->tx_data_offset); |
| |
| /* Fill in the HW SGT structure. |
| * |
| * sgt_buf is zeroed out, so the following fields are implicit |
| * in all sgt entries: |
| * - offset is 0 |
| * - format is 'dpaa2_sg_single' |
| */ |
| for_each_sg(scl, crt_scl, num_dma_bufs, i) { |
| dpaa2_sg_set_addr(&sgt[i], sg_dma_address(crt_scl)); |
| dpaa2_sg_set_len(&sgt[i], sg_dma_len(crt_scl)); |
| } |
| dpaa2_sg_set_final(&sgt[i - 1], true); |
| |
| /* Store the skb backpointer in the SGT buffer. |
| * Fit the scatterlist and the number of buffers alongside the |
| * skb backpointer in the software annotation area. We'll need |
| * all of them on Tx Conf. |
| */ |
| swa = (struct dpaa2_eth_swa *)sgt_buf; |
| swa->skb = skb; |
| swa->scl = scl; |
| swa->num_sg = num_sg; |
| swa->sgt_size = sgt_buf_size; |
| |
| /* Separately map the SGT buffer */ |
| addr = dma_map_single(dev, sgt_buf, sgt_buf_size, DMA_BIDIRECTIONAL); |
| if (unlikely(dma_mapping_error(dev, addr))) { |
| err = -ENOMEM; |
| goto dma_map_single_failed; |
| } |
| dpaa2_fd_set_offset(fd, priv->tx_data_offset); |
| dpaa2_fd_set_format(fd, dpaa2_fd_sg); |
| dpaa2_fd_set_addr(fd, addr); |
| dpaa2_fd_set_len(fd, skb->len); |
| dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA); |
| |
| if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) |
| enable_tx_tstamp(fd, sgt_buf); |
| |
| return 0; |
| |
| dma_map_single_failed: |
| skb_free_frag(sgt_buf); |
| sgt_buf_alloc_failed: |
| dma_unmap_sg(dev, scl, num_sg, DMA_BIDIRECTIONAL); |
| dma_map_sg_failed: |
| kfree(scl); |
| return err; |
| } |
| |
| /* Create a frame descriptor based on a linear skb */ |
| static int build_single_fd(struct dpaa2_eth_priv *priv, |
| struct sk_buff *skb, |
| struct dpaa2_fd *fd) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| u8 *buffer_start, *aligned_start; |
| struct sk_buff **skbh; |
| dma_addr_t addr; |
| |
| buffer_start = skb->data - dpaa2_eth_needed_headroom(priv, skb); |
| |
| /* If there's enough room to align the FD address, do it. |
| * It will help hardware optimize accesses. |
| */ |
| aligned_start = PTR_ALIGN(buffer_start - DPAA2_ETH_TX_BUF_ALIGN, |
| DPAA2_ETH_TX_BUF_ALIGN); |
| if (aligned_start >= skb->head) |
| buffer_start = aligned_start; |
| |
| /* Store a backpointer to the skb at the beginning of the buffer |
| * (in the private data area) such that we can release it |
| * on Tx confirm |
| */ |
| skbh = (struct sk_buff **)buffer_start; |
| *skbh = skb; |
| |
| addr = dma_map_single(dev, buffer_start, |
| skb_tail_pointer(skb) - buffer_start, |
| DMA_BIDIRECTIONAL); |
| if (unlikely(dma_mapping_error(dev, addr))) |
| return -ENOMEM; |
| |
| dpaa2_fd_set_addr(fd, addr); |
| dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start)); |
| dpaa2_fd_set_len(fd, skb->len); |
| dpaa2_fd_set_format(fd, dpaa2_fd_single); |
| dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA); |
| |
| if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) |
| enable_tx_tstamp(fd, buffer_start); |
| |
| return 0; |
| } |
| |
| /* FD freeing routine on the Tx path |
| * |
| * DMA-unmap and free FD and possibly SGT buffer allocated on Tx. The skb |
| * back-pointed to is also freed. |
| * This can be called either from dpaa2_eth_tx_conf() or on the error path of |
| * dpaa2_eth_tx(). |
| */ |
| static void free_tx_fd(const struct dpaa2_eth_priv *priv, |
| const struct dpaa2_fd *fd) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| dma_addr_t fd_addr; |
| struct sk_buff **skbh, *skb; |
| unsigned char *buffer_start; |
| struct dpaa2_eth_swa *swa; |
| u8 fd_format = dpaa2_fd_get_format(fd); |
| |
| fd_addr = dpaa2_fd_get_addr(fd); |
| skbh = dpaa2_iova_to_virt(priv->iommu_domain, fd_addr); |
| |
| if (fd_format == dpaa2_fd_single) { |
| skb = *skbh; |
| buffer_start = (unsigned char *)skbh; |
| /* Accessing the skb buffer is safe before dma unmap, because |
| * we didn't map the actual skb shell. |
| */ |
| dma_unmap_single(dev, fd_addr, |
| skb_tail_pointer(skb) - buffer_start, |
| DMA_BIDIRECTIONAL); |
| } else if (fd_format == dpaa2_fd_sg) { |
| swa = (struct dpaa2_eth_swa *)skbh; |
| skb = swa->skb; |
| |
| /* Unmap the scatterlist */ |
| dma_unmap_sg(dev, swa->scl, swa->num_sg, DMA_BIDIRECTIONAL); |
| kfree(swa->scl); |
| |
| /* Unmap the SGT buffer */ |
| dma_unmap_single(dev, fd_addr, swa->sgt_size, |
| DMA_BIDIRECTIONAL); |
| } else { |
| netdev_dbg(priv->net_dev, "Invalid FD format\n"); |
| return; |
| } |
| |
| /* Get the timestamp value */ |
| if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { |
| struct skb_shared_hwtstamps shhwtstamps; |
| __le64 *ts = dpaa2_get_ts(skbh, true); |
| u64 ns; |
| |
| memset(&shhwtstamps, 0, sizeof(shhwtstamps)); |
| |
| ns = DPAA2_PTP_CLK_PERIOD_NS * le64_to_cpup(ts); |
| shhwtstamps.hwtstamp = ns_to_ktime(ns); |
| skb_tstamp_tx(skb, &shhwtstamps); |
| } |
| |
| /* Free SGT buffer allocated on tx */ |
| if (fd_format != dpaa2_fd_single) |
| skb_free_frag(skbh); |
| |
| /* Move on with skb release */ |
| dev_kfree_skb(skb); |
| } |
| |
| static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| struct dpaa2_fd fd; |
| struct rtnl_link_stats64 *percpu_stats; |
| struct dpaa2_eth_drv_stats *percpu_extras; |
| struct dpaa2_eth_fq *fq; |
| struct netdev_queue *nq; |
| u16 queue_mapping; |
| unsigned int needed_headroom; |
| u32 fd_len; |
| int err, i; |
| |
| percpu_stats = this_cpu_ptr(priv->percpu_stats); |
| percpu_extras = this_cpu_ptr(priv->percpu_extras); |
| |
| needed_headroom = dpaa2_eth_needed_headroom(priv, skb); |
| if (skb_headroom(skb) < needed_headroom) { |
| struct sk_buff *ns; |
| |
| ns = skb_realloc_headroom(skb, needed_headroom); |
| if (unlikely(!ns)) { |
| percpu_stats->tx_dropped++; |
| goto err_alloc_headroom; |
| } |
| percpu_extras->tx_reallocs++; |
| |
| if (skb->sk) |
| skb_set_owner_w(ns, skb->sk); |
| |
| dev_kfree_skb(skb); |
| skb = ns; |
| } |
| |
| /* We'll be holding a back-reference to the skb until Tx Confirmation; |
| * we don't want that overwritten by a concurrent Tx with a cloned skb. |
| */ |
| skb = skb_unshare(skb, GFP_ATOMIC); |
| if (unlikely(!skb)) { |
| /* skb_unshare() has already freed the skb */ |
| percpu_stats->tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| /* Setup the FD fields */ |
| memset(&fd, 0, sizeof(fd)); |
| |
| if (skb_is_nonlinear(skb)) { |
| err = build_sg_fd(priv, skb, &fd); |
| percpu_extras->tx_sg_frames++; |
| percpu_extras->tx_sg_bytes += skb->len; |
| } else { |
| err = build_single_fd(priv, skb, &fd); |
| } |
| |
| if (unlikely(err)) { |
| percpu_stats->tx_dropped++; |
| goto err_build_fd; |
| } |
| |
| /* Tracing point */ |
| trace_dpaa2_tx_fd(net_dev, &fd); |
| |
| /* TxConf FQ selection relies on queue id from the stack. |
| * In case of a forwarded frame from another DPNI interface, we choose |
| * a queue affined to the same core that processed the Rx frame |
| */ |
| queue_mapping = skb_get_queue_mapping(skb); |
| fq = &priv->fq[queue_mapping]; |
| for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) { |
| err = dpaa2_io_service_enqueue_qd(fq->channel->dpio, |
| priv->tx_qdid, 0, |
| fq->tx_qdbin, &fd); |
| if (err != -EBUSY) |
| break; |
| } |
| percpu_extras->tx_portal_busy += i; |
| if (unlikely(err < 0)) { |
| percpu_stats->tx_errors++; |
| /* Clean up everything, including freeing the skb */ |
| free_tx_fd(priv, &fd); |
| } else { |
| fd_len = dpaa2_fd_get_len(&fd); |
| percpu_stats->tx_packets++; |
| percpu_stats->tx_bytes += fd_len; |
| |
| nq = netdev_get_tx_queue(net_dev, queue_mapping); |
| netdev_tx_sent_queue(nq, fd_len); |
| } |
| |
| return NETDEV_TX_OK; |
| |
| err_build_fd: |
| err_alloc_headroom: |
| dev_kfree_skb(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Tx confirmation frame processing routine */ |
| static void dpaa2_eth_tx_conf(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch __always_unused, |
| const struct dpaa2_fd *fd, |
| struct dpaa2_eth_fq *fq) |
| { |
| struct rtnl_link_stats64 *percpu_stats; |
| struct dpaa2_eth_drv_stats *percpu_extras; |
| u32 fd_len = dpaa2_fd_get_len(fd); |
| u32 fd_errors; |
| |
| /* Tracing point */ |
| trace_dpaa2_tx_conf_fd(priv->net_dev, fd); |
| |
| percpu_extras = this_cpu_ptr(priv->percpu_extras); |
| percpu_extras->tx_conf_frames++; |
| percpu_extras->tx_conf_bytes += fd_len; |
| |
| fq->dq_frames++; |
| fq->dq_bytes += fd_len; |
| |
| /* Check frame errors in the FD field */ |
| fd_errors = dpaa2_fd_get_ctrl(fd) & DPAA2_FD_TX_ERR_MASK; |
| free_tx_fd(priv, fd); |
| |
| if (likely(!fd_errors)) |
| return; |
| |
| if (net_ratelimit()) |
| netdev_dbg(priv->net_dev, "TX frame FD error: 0x%08x\n", |
| fd_errors); |
| |
| percpu_stats = this_cpu_ptr(priv->percpu_stats); |
| /* Tx-conf logically pertains to the egress path. */ |
| percpu_stats->tx_errors++; |
| } |
| |
| static int set_rx_csum(struct dpaa2_eth_priv *priv, bool enable) |
| { |
| int err; |
| |
| err = dpni_set_offload(priv->mc_io, 0, priv->mc_token, |
| DPNI_OFF_RX_L3_CSUM, enable); |
| if (err) { |
| netdev_err(priv->net_dev, |
| "dpni_set_offload(RX_L3_CSUM) failed\n"); |
| return err; |
| } |
| |
| err = dpni_set_offload(priv->mc_io, 0, priv->mc_token, |
| DPNI_OFF_RX_L4_CSUM, enable); |
| if (err) { |
| netdev_err(priv->net_dev, |
| "dpni_set_offload(RX_L4_CSUM) failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int set_tx_csum(struct dpaa2_eth_priv *priv, bool enable) |
| { |
| int err; |
| |
| err = dpni_set_offload(priv->mc_io, 0, priv->mc_token, |
| DPNI_OFF_TX_L3_CSUM, enable); |
| if (err) { |
| netdev_err(priv->net_dev, "dpni_set_offload(TX_L3_CSUM) failed\n"); |
| return err; |
| } |
| |
| err = dpni_set_offload(priv->mc_io, 0, priv->mc_token, |
| DPNI_OFF_TX_L4_CSUM, enable); |
| if (err) { |
| netdev_err(priv->net_dev, "dpni_set_offload(TX_L4_CSUM) failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Free buffers acquired from the buffer pool or which were meant to |
| * be released in the pool |
| */ |
| static void free_bufs(struct dpaa2_eth_priv *priv, u64 *buf_array, int count) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| void *vaddr; |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]); |
| dma_unmap_single(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| skb_free_frag(vaddr); |
| } |
| } |
| |
| /* Perform a single release command to add buffers |
| * to the specified buffer pool |
| */ |
| static int add_bufs(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, u16 bpid) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| u64 buf_array[DPAA2_ETH_BUFS_PER_CMD]; |
| void *buf; |
| dma_addr_t addr; |
| int i, err; |
| |
| for (i = 0; i < DPAA2_ETH_BUFS_PER_CMD; i++) { |
| /* Allocate buffer visible to WRIOP + skb shared info + |
| * alignment padding |
| */ |
| buf = napi_alloc_frag(dpaa2_eth_buf_raw_size(priv)); |
| if (unlikely(!buf)) |
| goto err_alloc; |
| |
| buf = PTR_ALIGN(buf, priv->rx_buf_align); |
| |
| addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(dev, addr))) |
| goto err_map; |
| |
| buf_array[i] = addr; |
| |
| /* tracing point */ |
| trace_dpaa2_eth_buf_seed(priv->net_dev, |
| buf, dpaa2_eth_buf_raw_size(priv), |
| addr, DPAA2_ETH_RX_BUF_SIZE, |
| bpid); |
| } |
| |
| release_bufs: |
| /* In case the portal is busy, retry until successful */ |
| while ((err = dpaa2_io_service_release(ch->dpio, bpid, |
| buf_array, i)) == -EBUSY) |
| cpu_relax(); |
| |
| /* If release command failed, clean up and bail out; |
| * not much else we can do about it |
| */ |
| if (err) { |
| free_bufs(priv, buf_array, i); |
| return 0; |
| } |
| |
| return i; |
| |
| err_map: |
| skb_free_frag(buf); |
| err_alloc: |
| /* If we managed to allocate at least some buffers, |
| * release them to hardware |
| */ |
| if (i) |
| goto release_bufs; |
| |
| return 0; |
| } |
| |
| static int seed_pool(struct dpaa2_eth_priv *priv, u16 bpid) |
| { |
| int i, j; |
| int new_count; |
| |
| /* This is the lazy seeding of Rx buffer pools. |
| * dpaa2_add_bufs() is also used on the Rx hotpath and calls |
| * napi_alloc_frag(). The trouble with that is that it in turn ends up |
| * calling this_cpu_ptr(), which mandates execution in atomic context. |
| * Rather than splitting up the code, do a one-off preempt disable. |
| */ |
| preempt_disable(); |
| for (j = 0; j < priv->num_channels; j++) { |
| for (i = 0; i < DPAA2_ETH_NUM_BUFS; |
| i += DPAA2_ETH_BUFS_PER_CMD) { |
| new_count = add_bufs(priv, priv->channel[j], bpid); |
| priv->channel[j]->buf_count += new_count; |
| |
| if (new_count < DPAA2_ETH_BUFS_PER_CMD) { |
| preempt_enable(); |
| return -ENOMEM; |
| } |
| } |
| } |
| preempt_enable(); |
| |
| return 0; |
| } |
| |
| /** |
| * Drain the specified number of buffers from the DPNI's private buffer pool. |
| * @count must not exceeed DPAA2_ETH_BUFS_PER_CMD |
| */ |
| static void drain_bufs(struct dpaa2_eth_priv *priv, int count) |
| { |
| u64 buf_array[DPAA2_ETH_BUFS_PER_CMD]; |
| int ret; |
| |
| do { |
| ret = dpaa2_io_service_acquire(NULL, priv->bpid, |
| buf_array, count); |
| if (ret < 0) { |
| netdev_err(priv->net_dev, "dpaa2_io_service_acquire() failed\n"); |
| return; |
| } |
| free_bufs(priv, buf_array, ret); |
| } while (ret); |
| } |
| |
| static void drain_pool(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| |
| drain_bufs(priv, DPAA2_ETH_BUFS_PER_CMD); |
| drain_bufs(priv, 1); |
| |
| for (i = 0; i < priv->num_channels; i++) |
| priv->channel[i]->buf_count = 0; |
| } |
| |
| /* Function is called from softirq context only, so we don't need to guard |
| * the access to percpu count |
| */ |
| static int refill_pool(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *ch, |
| u16 bpid) |
| { |
| int new_count; |
| |
| if (likely(ch->buf_count >= DPAA2_ETH_REFILL_THRESH)) |
| return 0; |
| |
| do { |
| new_count = add_bufs(priv, ch, bpid); |
| if (unlikely(!new_count)) { |
| /* Out of memory; abort for now, we'll try later on */ |
| break; |
| } |
| ch->buf_count += new_count; |
| } while (ch->buf_count < DPAA2_ETH_NUM_BUFS); |
| |
| if (unlikely(ch->buf_count < DPAA2_ETH_NUM_BUFS)) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int pull_channel(struct dpaa2_eth_channel *ch) |
| { |
| int err; |
| int dequeues = -1; |
| |
| /* Retry while portal is busy */ |
| do { |
| err = dpaa2_io_service_pull_channel(ch->dpio, ch->ch_id, |
| ch->store); |
| dequeues++; |
| cpu_relax(); |
| } while (err == -EBUSY); |
| |
| ch->stats.dequeue_portal_busy += dequeues; |
| if (unlikely(err)) |
| ch->stats.pull_err++; |
| |
| return err; |
| } |
| |
| /* NAPI poll routine |
| * |
| * Frames are dequeued from the QMan channel associated with this NAPI context. |
| * Rx, Tx confirmation and (if configured) Rx error frames all count |
| * towards the NAPI budget. |
| */ |
| static int dpaa2_eth_poll(struct napi_struct *napi, int budget) |
| { |
| struct dpaa2_eth_channel *ch; |
| struct dpaa2_eth_priv *priv; |
| int rx_cleaned = 0, txconf_cleaned = 0; |
| struct dpaa2_eth_fq *fq, *txc_fq = NULL; |
| struct netdev_queue *nq; |
| int store_cleaned, work_done; |
| int err; |
| |
| ch = container_of(napi, struct dpaa2_eth_channel, napi); |
| priv = ch->priv; |
| |
| do { |
| err = pull_channel(ch); |
| if (unlikely(err)) |
| break; |
| |
| /* Refill pool if appropriate */ |
| refill_pool(priv, ch, priv->bpid); |
| |
| store_cleaned = consume_frames(ch, &fq); |
| if (!store_cleaned) |
| break; |
| if (fq->type == DPAA2_RX_FQ) { |
| rx_cleaned += store_cleaned; |
| } else { |
| txconf_cleaned += store_cleaned; |
| /* We have a single Tx conf FQ on this channel */ |
| txc_fq = fq; |
| } |
| |
| /* If we either consumed the whole NAPI budget with Rx frames |
| * or we reached the Tx confirmations threshold, we're done. |
| */ |
| if (rx_cleaned >= budget || |
| txconf_cleaned >= DPAA2_ETH_TXCONF_PER_NAPI) { |
| work_done = budget; |
| goto out; |
| } |
| } while (store_cleaned); |
| |
| /* We didn't consume the entire budget, so finish napi and |
| * re-enable data availability notifications |
| */ |
| napi_complete_done(napi, rx_cleaned); |
| do { |
| err = dpaa2_io_service_rearm(ch->dpio, &ch->nctx); |
| cpu_relax(); |
| } while (err == -EBUSY); |
| WARN_ONCE(err, "CDAN notifications rearm failed on core %d", |
| ch->nctx.desired_cpu); |
| |
| work_done = max(rx_cleaned, 1); |
| |
| out: |
| if (txc_fq) { |
| nq = netdev_get_tx_queue(priv->net_dev, txc_fq->flowid); |
| netdev_tx_completed_queue(nq, txc_fq->dq_frames, |
| txc_fq->dq_bytes); |
| txc_fq->dq_frames = 0; |
| txc_fq->dq_bytes = 0; |
| } |
| |
| return work_done; |
| } |
| |
| static void enable_ch_napi(struct dpaa2_eth_priv *priv) |
| { |
| struct dpaa2_eth_channel *ch; |
| int i; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| napi_enable(&ch->napi); |
| } |
| } |
| |
| static void disable_ch_napi(struct dpaa2_eth_priv *priv) |
| { |
| struct dpaa2_eth_channel *ch; |
| int i; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| napi_disable(&ch->napi); |
| } |
| } |
| |
| static int link_state_update(struct dpaa2_eth_priv *priv) |
| { |
| struct dpni_link_state state = {0}; |
| int err; |
| |
| err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state); |
| if (unlikely(err)) { |
| netdev_err(priv->net_dev, |
| "dpni_get_link_state() failed\n"); |
| return err; |
| } |
| |
| /* Chech link state; speed / duplex changes are not treated yet */ |
| if (priv->link_state.up == state.up) |
| return 0; |
| |
| priv->link_state = state; |
| if (state.up) { |
| netif_carrier_on(priv->net_dev); |
| netif_tx_start_all_queues(priv->net_dev); |
| } else { |
| netif_tx_stop_all_queues(priv->net_dev); |
| netif_carrier_off(priv->net_dev); |
| } |
| |
| netdev_info(priv->net_dev, "Link Event: state %s\n", |
| state.up ? "up" : "down"); |
| |
| return 0; |
| } |
| |
| static int dpaa2_eth_open(struct net_device *net_dev) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| int err; |
| |
| err = seed_pool(priv, priv->bpid); |
| if (err) { |
| /* Not much to do; the buffer pool, though not filled up, |
| * may still contain some buffers which would enable us |
| * to limp on. |
| */ |
| netdev_err(net_dev, "Buffer seeding failed for DPBP %d (bpid=%d)\n", |
| priv->dpbp_dev->obj_desc.id, priv->bpid); |
| } |
| |
| /* We'll only start the txqs when the link is actually ready; make sure |
| * we don't race against the link up notification, which may come |
| * immediately after dpni_enable(); |
| */ |
| netif_tx_stop_all_queues(net_dev); |
| enable_ch_napi(priv); |
| /* Also, explicitly set carrier off, otherwise netif_carrier_ok() will |
| * return true and cause 'ip link show' to report the LOWER_UP flag, |
| * even though the link notification wasn't even received. |
| */ |
| netif_carrier_off(net_dev); |
| |
| err = dpni_enable(priv->mc_io, 0, priv->mc_token); |
| if (err < 0) { |
| netdev_err(net_dev, "dpni_enable() failed\n"); |
| goto enable_err; |
| } |
| |
| /* If the DPMAC object has already processed the link up interrupt, |
| * we have to learn the link state ourselves. |
| */ |
| err = link_state_update(priv); |
| if (err < 0) { |
| netdev_err(net_dev, "Can't update link state\n"); |
| goto link_state_err; |
| } |
| |
| return 0; |
| |
| link_state_err: |
| enable_err: |
| disable_ch_napi(priv); |
| drain_pool(priv); |
| return err; |
| } |
| |
| /* The DPIO store must be empty when we call this, |
| * at the end of every NAPI cycle. |
| */ |
| static u32 drain_channel(struct dpaa2_eth_channel *ch) |
| { |
| u32 drained = 0, total = 0; |
| |
| do { |
| pull_channel(ch); |
| drained = consume_frames(ch, NULL); |
| total += drained; |
| } while (drained); |
| |
| return total; |
| } |
| |
| static u32 drain_ingress_frames(struct dpaa2_eth_priv *priv) |
| { |
| struct dpaa2_eth_channel *ch; |
| int i; |
| u32 drained = 0; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| drained += drain_channel(ch); |
| } |
| |
| return drained; |
| } |
| |
| static int dpaa2_eth_stop(struct net_device *net_dev) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| int dpni_enabled = 0; |
| int retries = 10; |
| u32 drained; |
| |
| netif_tx_stop_all_queues(net_dev); |
| netif_carrier_off(net_dev); |
| |
| /* Loop while dpni_disable() attempts to drain the egress FQs |
| * and confirm them back to us. |
| */ |
| do { |
| dpni_disable(priv->mc_io, 0, priv->mc_token); |
| dpni_is_enabled(priv->mc_io, 0, priv->mc_token, &dpni_enabled); |
| if (dpni_enabled) |
| /* Allow the hardware some slack */ |
| msleep(100); |
| } while (dpni_enabled && --retries); |
| if (!retries) { |
| netdev_warn(net_dev, "Retry count exceeded disabling DPNI\n"); |
| /* Must go on and disable NAPI nonetheless, so we don't crash at |
| * the next "ifconfig up" |
| */ |
| } |
| |
| /* Wait for NAPI to complete on every core and disable it. |
| * In particular, this will also prevent NAPI from being rescheduled if |
| * a new CDAN is serviced, effectively discarding the CDAN. We therefore |
| * don't even need to disarm the channels, except perhaps for the case |
| * of a huge coalescing value. |
| */ |
| disable_ch_napi(priv); |
| |
| /* Manually drain the Rx and TxConf queues */ |
| drained = drain_ingress_frames(priv); |
| if (drained) |
| netdev_dbg(net_dev, "Drained %d frames.\n", drained); |
| |
| /* Empty the buffer pool */ |
| drain_pool(priv); |
| |
| return 0; |
| } |
| |
| static int dpaa2_eth_set_addr(struct net_device *net_dev, void *addr) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| struct device *dev = net_dev->dev.parent; |
| int err; |
| |
| err = eth_mac_addr(net_dev, addr); |
| if (err < 0) { |
| dev_err(dev, "eth_mac_addr() failed (%d)\n", err); |
| return err; |
| } |
| |
| err = dpni_set_primary_mac_addr(priv->mc_io, 0, priv->mc_token, |
| net_dev->dev_addr); |
| if (err) { |
| dev_err(dev, "dpni_set_primary_mac_addr() failed (%d)\n", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /** Fill in counters maintained by the GPP driver. These may be different from |
| * the hardware counters obtained by ethtool. |
| */ |
| static void dpaa2_eth_get_stats(struct net_device *net_dev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| struct rtnl_link_stats64 *percpu_stats; |
| u64 *cpustats; |
| u64 *netstats = (u64 *)stats; |
| int i, j; |
| int num = sizeof(struct rtnl_link_stats64) / sizeof(u64); |
| |
| for_each_possible_cpu(i) { |
| percpu_stats = per_cpu_ptr(priv->percpu_stats, i); |
| cpustats = (u64 *)percpu_stats; |
| for (j = 0; j < num; j++) |
| netstats[j] += cpustats[j]; |
| } |
| } |
| |
| /* Copy mac unicast addresses from @net_dev to @priv. |
| * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. |
| */ |
| static void add_uc_hw_addr(const struct net_device *net_dev, |
| struct dpaa2_eth_priv *priv) |
| { |
| struct netdev_hw_addr *ha; |
| int err; |
| |
| netdev_for_each_uc_addr(ha, net_dev) { |
| err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, |
| ha->addr); |
| if (err) |
| netdev_warn(priv->net_dev, |
| "Could not add ucast MAC %pM to the filtering table (err %d)\n", |
| ha->addr, err); |
| } |
| } |
| |
| /* Copy mac multicast addresses from @net_dev to @priv |
| * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. |
| */ |
| static void add_mc_hw_addr(const struct net_device *net_dev, |
| struct dpaa2_eth_priv *priv) |
| { |
| struct netdev_hw_addr *ha; |
| int err; |
| |
| netdev_for_each_mc_addr(ha, net_dev) { |
| err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, |
| ha->addr); |
| if (err) |
| netdev_warn(priv->net_dev, |
| "Could not add mcast MAC %pM to the filtering table (err %d)\n", |
| ha->addr, err); |
| } |
| } |
| |
| static void dpaa2_eth_set_rx_mode(struct net_device *net_dev) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| int uc_count = netdev_uc_count(net_dev); |
| int mc_count = netdev_mc_count(net_dev); |
| u8 max_mac = priv->dpni_attrs.mac_filter_entries; |
| u32 options = priv->dpni_attrs.options; |
| u16 mc_token = priv->mc_token; |
| struct fsl_mc_io *mc_io = priv->mc_io; |
| int err; |
| |
| /* Basic sanity checks; these probably indicate a misconfiguration */ |
| if (options & DPNI_OPT_NO_MAC_FILTER && max_mac != 0) |
| netdev_info(net_dev, |
| "mac_filter_entries=%d, DPNI_OPT_NO_MAC_FILTER option must be disabled\n", |
| max_mac); |
| |
| /* Force promiscuous if the uc or mc counts exceed our capabilities. */ |
| if (uc_count > max_mac) { |
| netdev_info(net_dev, |
| "Unicast addr count reached %d, max allowed is %d; forcing promisc\n", |
| uc_count, max_mac); |
| goto force_promisc; |
| } |
| if (mc_count + uc_count > max_mac) { |
| netdev_info(net_dev, |
| "Unicast + multicast addr count reached %d, max allowed is %d; forcing promisc\n", |
| uc_count + mc_count, max_mac); |
| goto force_mc_promisc; |
| } |
| |
| /* Adjust promisc settings due to flag combinations */ |
| if (net_dev->flags & IFF_PROMISC) |
| goto force_promisc; |
| if (net_dev->flags & IFF_ALLMULTI) { |
| /* First, rebuild unicast filtering table. This should be done |
| * in promisc mode, in order to avoid frame loss while we |
| * progressively add entries to the table. |
| * We don't know whether we had been in promisc already, and |
| * making an MC call to find out is expensive; so set uc promisc |
| * nonetheless. |
| */ |
| err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't set uc promisc\n"); |
| |
| /* Actual uc table reconstruction. */ |
| err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 0); |
| if (err) |
| netdev_warn(net_dev, "Can't clear uc filters\n"); |
| add_uc_hw_addr(net_dev, priv); |
| |
| /* Finally, clear uc promisc and set mc promisc as requested. */ |
| err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); |
| if (err) |
| netdev_warn(net_dev, "Can't clear uc promisc\n"); |
| goto force_mc_promisc; |
| } |
| |
| /* Neither unicast, nor multicast promisc will be on... eventually. |
| * For now, rebuild mac filtering tables while forcing both of them on. |
| */ |
| err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't set uc promisc (%d)\n", err); |
| err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't set mc promisc (%d)\n", err); |
| |
| /* Actual mac filtering tables reconstruction */ |
| err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't clear mac filters\n"); |
| add_mc_hw_addr(net_dev, priv); |
| add_uc_hw_addr(net_dev, priv); |
| |
| /* Now we can clear both ucast and mcast promisc, without risking |
| * to drop legitimate frames anymore. |
| */ |
| err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); |
| if (err) |
| netdev_warn(net_dev, "Can't clear ucast promisc\n"); |
| err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 0); |
| if (err) |
| netdev_warn(net_dev, "Can't clear mcast promisc\n"); |
| |
| return; |
| |
| force_promisc: |
| err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't set ucast promisc\n"); |
| force_mc_promisc: |
| err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); |
| if (err) |
| netdev_warn(net_dev, "Can't set mcast promisc\n"); |
| } |
| |
| static int dpaa2_eth_set_features(struct net_device *net_dev, |
| netdev_features_t features) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| netdev_features_t changed = features ^ net_dev->features; |
| bool enable; |
| int err; |
| |
| if (changed & NETIF_F_RXCSUM) { |
| enable = !!(features & NETIF_F_RXCSUM); |
| err = set_rx_csum(priv, enable); |
| if (err) |
| return err; |
| } |
| |
| if (changed & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) { |
| enable = !!(features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)); |
| err = set_tx_csum(priv, enable); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(dev); |
| struct hwtstamp_config config; |
| |
| if (copy_from_user(&config, rq->ifr_data, sizeof(config))) |
| return -EFAULT; |
| |
| switch (config.tx_type) { |
| case HWTSTAMP_TX_OFF: |
| priv->tx_tstamp = false; |
| break; |
| case HWTSTAMP_TX_ON: |
| priv->tx_tstamp = true; |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| if (config.rx_filter == HWTSTAMP_FILTER_NONE) { |
| priv->rx_tstamp = false; |
| } else { |
| priv->rx_tstamp = true; |
| /* TS is set for all frame types, not only those requested */ |
| config.rx_filter = HWTSTAMP_FILTER_ALL; |
| } |
| |
| return copy_to_user(rq->ifr_data, &config, sizeof(config)) ? |
| -EFAULT : 0; |
| } |
| |
| static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| if (cmd == SIOCSHWTSTAMP) |
| return dpaa2_eth_ts_ioctl(dev, rq, cmd); |
| |
| return -EINVAL; |
| } |
| |
| static bool xdp_mtu_valid(struct dpaa2_eth_priv *priv, int mtu) |
| { |
| int mfl, linear_mfl; |
| |
| mfl = DPAA2_ETH_L2_MAX_FRM(mtu); |
| linear_mfl = DPAA2_ETH_RX_BUF_SIZE - DPAA2_ETH_RX_HWA_SIZE - |
| dpaa2_eth_rx_head_room(priv); |
| |
| if (mfl > linear_mfl) { |
| netdev_warn(priv->net_dev, "Maximum MTU for XDP is %d\n", |
| linear_mfl - VLAN_ETH_HLEN); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int set_rx_mfl(struct dpaa2_eth_priv *priv, int mtu, bool has_xdp) |
| { |
| int mfl, err; |
| |
| /* We enforce a maximum Rx frame length based on MTU only if we have |
| * an XDP program attached (in order to avoid Rx S/G frames). |
| * Otherwise, we accept all incoming frames as long as they are not |
| * larger than maximum size supported in hardware |
| */ |
| if (has_xdp) |
| mfl = DPAA2_ETH_L2_MAX_FRM(mtu); |
| else |
| mfl = DPAA2_ETH_MFL; |
| |
| err = dpni_set_max_frame_length(priv->mc_io, 0, priv->mc_token, mfl); |
| if (err) { |
| netdev_err(priv->net_dev, "dpni_set_max_frame_length failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int dpaa2_eth_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(dev); |
| int err; |
| |
| if (!priv->xdp_prog) |
| goto out; |
| |
| if (!xdp_mtu_valid(priv, new_mtu)) |
| return -EINVAL; |
| |
| err = set_rx_mfl(priv, new_mtu, true); |
| if (err) |
| return err; |
| |
| out: |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| static int setup_xdp(struct net_device *dev, struct bpf_prog *prog) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(dev); |
| struct dpaa2_eth_channel *ch; |
| struct bpf_prog *old; |
| bool up, need_update; |
| int i, err; |
| |
| if (prog && !xdp_mtu_valid(priv, dev->mtu)) |
| return -EINVAL; |
| |
| if (prog) { |
| prog = bpf_prog_add(prog, priv->num_channels); |
| if (IS_ERR(prog)) |
| return PTR_ERR(prog); |
| } |
| |
| up = netif_running(dev); |
| need_update = (!!priv->xdp_prog != !!prog); |
| |
| if (up) |
| dpaa2_eth_stop(dev); |
| |
| /* While in xdp mode, enforce a maximum Rx frame size based on MTU */ |
| if (need_update) { |
| err = set_rx_mfl(priv, dev->mtu, !!prog); |
| if (err) |
| goto out_err; |
| } |
| |
| old = xchg(&priv->xdp_prog, prog); |
| if (old) |
| bpf_prog_put(old); |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| old = xchg(&ch->xdp.prog, prog); |
| if (old) |
| bpf_prog_put(old); |
| } |
| |
| if (up) { |
| err = dpaa2_eth_open(dev); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| |
| out_err: |
| if (prog) |
| bpf_prog_sub(prog, priv->num_channels); |
| if (up) |
| dpaa2_eth_open(dev); |
| |
| return err; |
| } |
| |
| static int dpaa2_eth_xdp(struct net_device *dev, struct netdev_bpf *xdp) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(dev); |
| |
| switch (xdp->command) { |
| case XDP_SETUP_PROG: |
| return setup_xdp(dev, xdp->prog); |
| case XDP_QUERY_PROG: |
| xdp->prog_id = priv->xdp_prog ? priv->xdp_prog->aux->id : 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops dpaa2_eth_ops = { |
| .ndo_open = dpaa2_eth_open, |
| .ndo_start_xmit = dpaa2_eth_tx, |
| .ndo_stop = dpaa2_eth_stop, |
| .ndo_set_mac_address = dpaa2_eth_set_addr, |
| .ndo_get_stats64 = dpaa2_eth_get_stats, |
| .ndo_set_rx_mode = dpaa2_eth_set_rx_mode, |
| .ndo_set_features = dpaa2_eth_set_features, |
| .ndo_do_ioctl = dpaa2_eth_ioctl, |
| .ndo_change_mtu = dpaa2_eth_change_mtu, |
| .ndo_bpf = dpaa2_eth_xdp, |
| }; |
| |
| static void cdan_cb(struct dpaa2_io_notification_ctx *ctx) |
| { |
| struct dpaa2_eth_channel *ch; |
| |
| ch = container_of(ctx, struct dpaa2_eth_channel, nctx); |
| |
| /* Update NAPI statistics */ |
| ch->stats.cdan++; |
| |
| napi_schedule_irqoff(&ch->napi); |
| } |
| |
| /* Allocate and configure a DPCON object */ |
| static struct fsl_mc_device *setup_dpcon(struct dpaa2_eth_priv *priv) |
| { |
| struct fsl_mc_device *dpcon; |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpcon_attr attrs; |
| int err; |
| |
| err = fsl_mc_object_allocate(to_fsl_mc_device(dev), |
| FSL_MC_POOL_DPCON, &dpcon); |
| if (err) { |
| if (err == -ENXIO) |
| err = -EPROBE_DEFER; |
| else |
| dev_info(dev, "Not enough DPCONs, will go on as-is\n"); |
| return ERR_PTR(err); |
| } |
| |
| err = dpcon_open(priv->mc_io, 0, dpcon->obj_desc.id, &dpcon->mc_handle); |
| if (err) { |
| dev_err(dev, "dpcon_open() failed\n"); |
| goto free; |
| } |
| |
| err = dpcon_reset(priv->mc_io, 0, dpcon->mc_handle); |
| if (err) { |
| dev_err(dev, "dpcon_reset() failed\n"); |
| goto close; |
| } |
| |
| err = dpcon_get_attributes(priv->mc_io, 0, dpcon->mc_handle, &attrs); |
| if (err) { |
| dev_err(dev, "dpcon_get_attributes() failed\n"); |
| goto close; |
| } |
| |
| err = dpcon_enable(priv->mc_io, 0, dpcon->mc_handle); |
| if (err) { |
| dev_err(dev, "dpcon_enable() failed\n"); |
| goto close; |
| } |
| |
| return dpcon; |
| |
| close: |
| dpcon_close(priv->mc_io, 0, dpcon->mc_handle); |
| free: |
| fsl_mc_object_free(dpcon); |
| |
| return NULL; |
| } |
| |
| static void free_dpcon(struct dpaa2_eth_priv *priv, |
| struct fsl_mc_device *dpcon) |
| { |
| dpcon_disable(priv->mc_io, 0, dpcon->mc_handle); |
| dpcon_close(priv->mc_io, 0, dpcon->mc_handle); |
| fsl_mc_object_free(dpcon); |
| } |
| |
| static struct dpaa2_eth_channel * |
| alloc_channel(struct dpaa2_eth_priv *priv) |
| { |
| struct dpaa2_eth_channel *channel; |
| struct dpcon_attr attr; |
| struct device *dev = priv->net_dev->dev.parent; |
| int err; |
| |
| channel = kzalloc(sizeof(*channel), GFP_KERNEL); |
| if (!channel) |
| return NULL; |
| |
| channel->dpcon = setup_dpcon(priv); |
| if (IS_ERR_OR_NULL(channel->dpcon)) { |
| err = PTR_ERR(channel->dpcon); |
| goto err_setup; |
| } |
| |
| err = dpcon_get_attributes(priv->mc_io, 0, channel->dpcon->mc_handle, |
| &attr); |
| if (err) { |
| dev_err(dev, "dpcon_get_attributes() failed\n"); |
| goto err_get_attr; |
| } |
| |
| channel->dpcon_id = attr.id; |
| channel->ch_id = attr.qbman_ch_id; |
| channel->priv = priv; |
| |
| return channel; |
| |
| err_get_attr: |
| free_dpcon(priv, channel->dpcon); |
| err_setup: |
| kfree(channel); |
| return ERR_PTR(err); |
| } |
| |
| static void free_channel(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_channel *channel) |
| { |
| free_dpcon(priv, channel->dpcon); |
| kfree(channel); |
| } |
| |
| /* DPIO setup: allocate and configure QBMan channels, setup core affinity |
| * and register data availability notifications |
| */ |
| static int setup_dpio(struct dpaa2_eth_priv *priv) |
| { |
| struct dpaa2_io_notification_ctx *nctx; |
| struct dpaa2_eth_channel *channel; |
| struct dpcon_notification_cfg dpcon_notif_cfg; |
| struct device *dev = priv->net_dev->dev.parent; |
| int i, err; |
| |
| /* We want the ability to spread ingress traffic (RX, TX conf) to as |
| * many cores as possible, so we need one channel for each core |
| * (unless there's fewer queues than cores, in which case the extra |
| * channels would be wasted). |
| * Allocate one channel per core and register it to the core's |
| * affine DPIO. If not enough channels are available for all cores |
| * or if some cores don't have an affine DPIO, there will be no |
| * ingress frame processing on those cores. |
| */ |
| cpumask_clear(&priv->dpio_cpumask); |
| for_each_online_cpu(i) { |
| /* Try to allocate a channel */ |
| channel = alloc_channel(priv); |
| if (IS_ERR_OR_NULL(channel)) { |
| err = PTR_ERR(channel); |
| if (err != -EPROBE_DEFER) |
| dev_info(dev, |
| "No affine channel for cpu %d and above\n", i); |
| goto err_alloc_ch; |
| } |
| |
| priv->channel[priv->num_channels] = channel; |
| |
| nctx = &channel->nctx; |
| nctx->is_cdan = 1; |
| nctx->cb = cdan_cb; |
| nctx->id = channel->ch_id; |
| nctx->desired_cpu = i; |
| |
| /* Register the new context */ |
| channel->dpio = dpaa2_io_service_select(i); |
| err = dpaa2_io_service_register(channel->dpio, nctx); |
| if (err) { |
| dev_dbg(dev, "No affine DPIO for cpu %d\n", i); |
| /* If no affine DPIO for this core, there's probably |
| * none available for next cores either. Signal we want |
| * to retry later, in case the DPIO devices weren't |
| * probed yet. |
| */ |
| err = -EPROBE_DEFER; |
| goto err_service_reg; |
| } |
| |
| /* Register DPCON notification with MC */ |
| dpcon_notif_cfg.dpio_id = nctx->dpio_id; |
| dpcon_notif_cfg.priority = 0; |
| dpcon_notif_cfg.user_ctx = nctx->qman64; |
| err = dpcon_set_notification(priv->mc_io, 0, |
| channel->dpcon->mc_handle, |
| &dpcon_notif_cfg); |
| if (err) { |
| dev_err(dev, "dpcon_set_notification failed()\n"); |
| goto err_set_cdan; |
| } |
| |
| /* If we managed to allocate a channel and also found an affine |
| * DPIO for this core, add it to the final mask |
| */ |
| cpumask_set_cpu(i, &priv->dpio_cpumask); |
| priv->num_channels++; |
| |
| /* Stop if we already have enough channels to accommodate all |
| * RX and TX conf queues |
| */ |
| if (priv->num_channels == priv->dpni_attrs.num_queues) |
| break; |
| } |
| |
| return 0; |
| |
| err_set_cdan: |
| dpaa2_io_service_deregister(channel->dpio, nctx); |
| err_service_reg: |
| free_channel(priv, channel); |
| err_alloc_ch: |
| if (err == -EPROBE_DEFER) |
| return err; |
| |
| if (cpumask_empty(&priv->dpio_cpumask)) { |
| dev_err(dev, "No cpu with an affine DPIO/DPCON\n"); |
| return -ENODEV; |
| } |
| |
| dev_info(dev, "Cores %*pbl available for processing ingress traffic\n", |
| cpumask_pr_args(&priv->dpio_cpumask)); |
| |
| return 0; |
| } |
| |
| static void free_dpio(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| struct dpaa2_eth_channel *ch; |
| |
| /* deregister CDAN notifications and free channels */ |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| dpaa2_io_service_deregister(ch->dpio, &ch->nctx); |
| free_channel(priv, ch); |
| } |
| } |
| |
| static struct dpaa2_eth_channel *get_affine_channel(struct dpaa2_eth_priv *priv, |
| int cpu) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| int i; |
| |
| for (i = 0; i < priv->num_channels; i++) |
| if (priv->channel[i]->nctx.desired_cpu == cpu) |
| return priv->channel[i]; |
| |
| /* We should never get here. Issue a warning and return |
| * the first channel, because it's still better than nothing |
| */ |
| dev_warn(dev, "No affine channel found for cpu %d\n", cpu); |
| |
| return priv->channel[0]; |
| } |
| |
| static void set_fq_affinity(struct dpaa2_eth_priv *priv) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct cpumask xps_mask; |
| struct dpaa2_eth_fq *fq; |
| int rx_cpu, txc_cpu; |
| int i, err; |
| |
| /* For each FQ, pick one channel/CPU to deliver frames to. |
| * This may well change at runtime, either through irqbalance or |
| * through direct user intervention. |
| */ |
| rx_cpu = txc_cpu = cpumask_first(&priv->dpio_cpumask); |
| |
| for (i = 0; i < priv->num_fqs; i++) { |
| fq = &priv->fq[i]; |
| switch (fq->type) { |
| case DPAA2_RX_FQ: |
| fq->target_cpu = rx_cpu; |
| rx_cpu = cpumask_next(rx_cpu, &priv->dpio_cpumask); |
| if (rx_cpu >= nr_cpu_ids) |
| rx_cpu = cpumask_first(&priv->dpio_cpumask); |
| break; |
| case DPAA2_TX_CONF_FQ: |
| fq->target_cpu = txc_cpu; |
| |
| /* Tell the stack to affine to txc_cpu the Tx queue |
| * associated with the confirmation one |
| */ |
| cpumask_clear(&xps_mask); |
| cpumask_set_cpu(txc_cpu, &xps_mask); |
| err = netif_set_xps_queue(priv->net_dev, &xps_mask, |
| fq->flowid); |
| if (err) |
| dev_err(dev, "Error setting XPS queue\n"); |
| |
| txc_cpu = cpumask_next(txc_cpu, &priv->dpio_cpumask); |
| if (txc_cpu >= nr_cpu_ids) |
| txc_cpu = cpumask_first(&priv->dpio_cpumask); |
| break; |
| default: |
| dev_err(dev, "Unknown FQ type: %d\n", fq->type); |
| } |
| fq->channel = get_affine_channel(priv, fq->target_cpu); |
| } |
| } |
| |
| static void setup_fqs(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| |
| /* We have one TxConf FQ per Tx flow. |
| * The number of Tx and Rx queues is the same. |
| * Tx queues come first in the fq array. |
| */ |
| for (i = 0; i < dpaa2_eth_queue_count(priv); i++) { |
| priv->fq[priv->num_fqs].type = DPAA2_TX_CONF_FQ; |
| priv->fq[priv->num_fqs].consume = dpaa2_eth_tx_conf; |
| priv->fq[priv->num_fqs++].flowid = (u16)i; |
| } |
| |
| for (i = 0; i < dpaa2_eth_queue_count(priv); i++) { |
| priv->fq[priv->num_fqs].type = DPAA2_RX_FQ; |
| priv->fq[priv->num_fqs].consume = dpaa2_eth_rx; |
| priv->fq[priv->num_fqs++].flowid = (u16)i; |
| } |
| |
| /* For each FQ, decide on which core to process incoming frames */ |
| set_fq_affinity(priv); |
| } |
| |
| /* Allocate and configure one buffer pool for each interface */ |
| static int setup_dpbp(struct dpaa2_eth_priv *priv) |
| { |
| int err; |
| struct fsl_mc_device *dpbp_dev; |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpbp_attr dpbp_attrs; |
| |
| err = fsl_mc_object_allocate(to_fsl_mc_device(dev), FSL_MC_POOL_DPBP, |
| &dpbp_dev); |
| if (err) { |
| if (err == -ENXIO) |
| err = -EPROBE_DEFER; |
| else |
| dev_err(dev, "DPBP device allocation failed\n"); |
| return err; |
| } |
| |
| priv->dpbp_dev = dpbp_dev; |
| |
| err = dpbp_open(priv->mc_io, 0, priv->dpbp_dev->obj_desc.id, |
| &dpbp_dev->mc_handle); |
| if (err) { |
| dev_err(dev, "dpbp_open() failed\n"); |
| goto err_open; |
| } |
| |
| err = dpbp_reset(priv->mc_io, 0, dpbp_dev->mc_handle); |
| if (err) { |
| dev_err(dev, "dpbp_reset() failed\n"); |
| goto err_reset; |
| } |
| |
| err = dpbp_enable(priv->mc_io, 0, dpbp_dev->mc_handle); |
| if (err) { |
| dev_err(dev, "dpbp_enable() failed\n"); |
| goto err_enable; |
| } |
| |
| err = dpbp_get_attributes(priv->mc_io, 0, dpbp_dev->mc_handle, |
| &dpbp_attrs); |
| if (err) { |
| dev_err(dev, "dpbp_get_attributes() failed\n"); |
| goto err_get_attr; |
| } |
| priv->bpid = dpbp_attrs.bpid; |
| |
| return 0; |
| |
| err_get_attr: |
| dpbp_disable(priv->mc_io, 0, dpbp_dev->mc_handle); |
| err_enable: |
| err_reset: |
| dpbp_close(priv->mc_io, 0, dpbp_dev->mc_handle); |
| err_open: |
| fsl_mc_object_free(dpbp_dev); |
| |
| return err; |
| } |
| |
| static void free_dpbp(struct dpaa2_eth_priv *priv) |
| { |
| drain_pool(priv); |
| dpbp_disable(priv->mc_io, 0, priv->dpbp_dev->mc_handle); |
| dpbp_close(priv->mc_io, 0, priv->dpbp_dev->mc_handle); |
| fsl_mc_object_free(priv->dpbp_dev); |
| } |
| |
| static int set_buffer_layout(struct dpaa2_eth_priv *priv) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_buffer_layout buf_layout = {0}; |
| int err; |
| |
| /* We need to check for WRIOP version 1.0.0, but depending on the MC |
| * version, this number is not always provided correctly on rev1. |
| * We need to check for both alternatives in this situation. |
| */ |
| if (priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(0, 0, 0) || |
| priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(1, 0, 0)) |
| priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN_REV1; |
| else |
| priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN; |
| |
| /* tx buffer */ |
| buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; |
| buf_layout.pass_timestamp = true; |
| buf_layout.options = DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | |
| DPNI_BUF_LAYOUT_OPT_TIMESTAMP; |
| err = dpni_set_buffer_layout(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX, &buf_layout); |
| if (err) { |
| dev_err(dev, "dpni_set_buffer_layout(TX) failed\n"); |
| return err; |
| } |
| |
| /* tx-confirm buffer */ |
| buf_layout.options = DPNI_BUF_LAYOUT_OPT_TIMESTAMP; |
| err = dpni_set_buffer_layout(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX_CONFIRM, &buf_layout); |
| if (err) { |
| dev_err(dev, "dpni_set_buffer_layout(TX_CONF) failed\n"); |
| return err; |
| } |
| |
| /* Now that we've set our tx buffer layout, retrieve the minimum |
| * required tx data offset. |
| */ |
| err = dpni_get_tx_data_offset(priv->mc_io, 0, priv->mc_token, |
| &priv->tx_data_offset); |
| if (err) { |
| dev_err(dev, "dpni_get_tx_data_offset() failed\n"); |
| return err; |
| } |
| |
| if ((priv->tx_data_offset % 64) != 0) |
| dev_warn(dev, "Tx data offset (%d) not a multiple of 64B\n", |
| priv->tx_data_offset); |
| |
| /* rx buffer */ |
| buf_layout.pass_frame_status = true; |
| buf_layout.pass_parser_result = true; |
| buf_layout.data_align = priv->rx_buf_align; |
| buf_layout.data_head_room = dpaa2_eth_rx_head_room(priv); |
| buf_layout.private_data_size = 0; |
| buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT | |
| DPNI_BUF_LAYOUT_OPT_FRAME_STATUS | |
| DPNI_BUF_LAYOUT_OPT_DATA_ALIGN | |
| DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM | |
| DPNI_BUF_LAYOUT_OPT_TIMESTAMP; |
| err = dpni_set_buffer_layout(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_RX, &buf_layout); |
| if (err) { |
| dev_err(dev, "dpni_set_buffer_layout(RX) failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Configure the DPNI object this interface is associated with */ |
| static int setup_dpni(struct fsl_mc_device *ls_dev) |
| { |
| struct device *dev = &ls_dev->dev; |
| struct dpaa2_eth_priv *priv; |
| struct net_device *net_dev; |
| int err; |
| |
| net_dev = dev_get_drvdata(dev); |
| priv = netdev_priv(net_dev); |
| |
| /* get a handle for the DPNI object */ |
| err = dpni_open(priv->mc_io, 0, ls_dev->obj_desc.id, &priv->mc_token); |
| if (err) { |
| dev_err(dev, "dpni_open() failed\n"); |
| return err; |
| } |
| |
| /* Check if we can work with this DPNI object */ |
| err = dpni_get_api_version(priv->mc_io, 0, &priv->dpni_ver_major, |
| &priv->dpni_ver_minor); |
| if (err) { |
| dev_err(dev, "dpni_get_api_version() failed\n"); |
| goto close; |
| } |
| if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_VER_MAJOR, DPNI_VER_MINOR) < 0) { |
| dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n", |
| priv->dpni_ver_major, priv->dpni_ver_minor, |
| DPNI_VER_MAJOR, DPNI_VER_MINOR); |
| err = -ENOTSUPP; |
| goto close; |
| } |
| |
| ls_dev->mc_io = priv->mc_io; |
| ls_dev->mc_handle = priv->mc_token; |
| |
| err = dpni_reset(priv->mc_io, 0, priv->mc_token); |
| if (err) { |
| dev_err(dev, "dpni_reset() failed\n"); |
| goto close; |
| } |
| |
| err = dpni_get_attributes(priv->mc_io, 0, priv->mc_token, |
| &priv->dpni_attrs); |
| if (err) { |
| dev_err(dev, "dpni_get_attributes() failed (err=%d)\n", err); |
| goto close; |
| } |
| |
| err = set_buffer_layout(priv); |
| if (err) |
| goto close; |
| |
| priv->cls_rules = devm_kzalloc(dev, sizeof(struct dpaa2_eth_cls_rule) * |
| dpaa2_eth_fs_count(priv), GFP_KERNEL); |
| if (!priv->cls_rules) |
| goto close; |
| |
| return 0; |
| |
| close: |
| dpni_close(priv->mc_io, 0, priv->mc_token); |
| |
| return err; |
| } |
| |
| static void free_dpni(struct dpaa2_eth_priv *priv) |
| { |
| int err; |
| |
| err = dpni_reset(priv->mc_io, 0, priv->mc_token); |
| if (err) |
| netdev_warn(priv->net_dev, "dpni_reset() failed (err %d)\n", |
| err); |
| |
| dpni_close(priv->mc_io, 0, priv->mc_token); |
| } |
| |
| static int setup_rx_flow(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_fq *fq) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_queue queue; |
| struct dpni_queue_id qid; |
| struct dpni_taildrop td; |
| int err; |
| |
| err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_RX, 0, fq->flowid, &queue, &qid); |
| if (err) { |
| dev_err(dev, "dpni_get_queue(RX) failed\n"); |
| return err; |
| } |
| |
| fq->fqid = qid.fqid; |
| |
| queue.destination.id = fq->channel->dpcon_id; |
| queue.destination.type = DPNI_DEST_DPCON; |
| queue.destination.priority = 1; |
| queue.user_context = (u64)(uintptr_t)fq; |
| err = dpni_set_queue(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_RX, 0, fq->flowid, |
| DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST, |
| &queue); |
| if (err) { |
| dev_err(dev, "dpni_set_queue(RX) failed\n"); |
| return err; |
| } |
| |
| td.enable = 1; |
| td.threshold = DPAA2_ETH_TAILDROP_THRESH; |
| err = dpni_set_taildrop(priv->mc_io, 0, priv->mc_token, DPNI_CP_QUEUE, |
| DPNI_QUEUE_RX, 0, fq->flowid, &td); |
| if (err) { |
| dev_err(dev, "dpni_set_threshold() failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int setup_tx_flow(struct dpaa2_eth_priv *priv, |
| struct dpaa2_eth_fq *fq) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_queue queue; |
| struct dpni_queue_id qid; |
| int err; |
| |
| err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX, 0, fq->flowid, &queue, &qid); |
| if (err) { |
| dev_err(dev, "dpni_get_queue(TX) failed\n"); |
| return err; |
| } |
| |
| fq->tx_qdbin = qid.qdbin; |
| |
| err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX_CONFIRM, 0, fq->flowid, |
| &queue, &qid); |
| if (err) { |
| dev_err(dev, "dpni_get_queue(TX_CONF) failed\n"); |
| return err; |
| } |
| |
| fq->fqid = qid.fqid; |
| |
| queue.destination.id = fq->channel->dpcon_id; |
| queue.destination.type = DPNI_DEST_DPCON; |
| queue.destination.priority = 0; |
| queue.user_context = (u64)(uintptr_t)fq; |
| err = dpni_set_queue(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX_CONFIRM, 0, fq->flowid, |
| DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST, |
| &queue); |
| if (err) { |
| dev_err(dev, "dpni_set_queue(TX_CONF) failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Supported header fields for Rx hash distribution key */ |
| static const struct dpaa2_eth_dist_fields dist_fields[] = { |
| { |
| /* L2 header */ |
| .rxnfc_field = RXH_L2DA, |
| .cls_prot = NET_PROT_ETH, |
| .cls_field = NH_FLD_ETH_DA, |
| .size = 6, |
| }, { |
| .cls_prot = NET_PROT_ETH, |
| .cls_field = NH_FLD_ETH_SA, |
| .size = 6, |
| }, { |
| /* This is the last ethertype field parsed: |
| * depending on frame format, it can be the MAC ethertype |
| * or the VLAN etype. |
| */ |
| .cls_prot = NET_PROT_ETH, |
| .cls_field = NH_FLD_ETH_TYPE, |
| .size = 2, |
| }, { |
| /* VLAN header */ |
| .rxnfc_field = RXH_VLAN, |
| .cls_prot = NET_PROT_VLAN, |
| .cls_field = NH_FLD_VLAN_TCI, |
| .size = 2, |
| }, { |
| /* IP header */ |
| .rxnfc_field = RXH_IP_SRC, |
| .cls_prot = NET_PROT_IP, |
| .cls_field = NH_FLD_IP_SRC, |
| .size = 4, |
| }, { |
| .rxnfc_field = RXH_IP_DST, |
| .cls_prot = NET_PROT_IP, |
| .cls_field = NH_FLD_IP_DST, |
| .size = 4, |
| }, { |
| .rxnfc_field = RXH_L3_PROTO, |
| .cls_prot = NET_PROT_IP, |
| .cls_field = NH_FLD_IP_PROTO, |
| .size = 1, |
| }, { |
| /* Using UDP ports, this is functionally equivalent to raw |
| * byte pairs from L4 header. |
| */ |
| .rxnfc_field = RXH_L4_B_0_1, |
| .cls_prot = NET_PROT_UDP, |
| .cls_field = NH_FLD_UDP_PORT_SRC, |
| .size = 2, |
| }, { |
| .rxnfc_field = RXH_L4_B_2_3, |
| .cls_prot = NET_PROT_UDP, |
| .cls_field = NH_FLD_UDP_PORT_DST, |
| .size = 2, |
| }, |
| }; |
| |
| /* Configure the Rx hash key using the legacy API */ |
| static int config_legacy_hash_key(struct dpaa2_eth_priv *priv, dma_addr_t key) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_rx_tc_dist_cfg dist_cfg; |
| int err; |
| |
| memset(&dist_cfg, 0, sizeof(dist_cfg)); |
| |
| dist_cfg.key_cfg_iova = key; |
| dist_cfg.dist_size = dpaa2_eth_queue_count(priv); |
| dist_cfg.dist_mode = DPNI_DIST_MODE_HASH; |
| |
| err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg); |
| if (err) |
| dev_err(dev, "dpni_set_rx_tc_dist failed\n"); |
| |
| return err; |
| } |
| |
| /* Configure the Rx hash key using the new API */ |
| static int config_hash_key(struct dpaa2_eth_priv *priv, dma_addr_t key) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_rx_dist_cfg dist_cfg; |
| int err; |
| |
| memset(&dist_cfg, 0, sizeof(dist_cfg)); |
| |
| dist_cfg.key_cfg_iova = key; |
| dist_cfg.dist_size = dpaa2_eth_queue_count(priv); |
| dist_cfg.enable = 1; |
| |
| err = dpni_set_rx_hash_dist(priv->mc_io, 0, priv->mc_token, &dist_cfg); |
| if (err) |
| dev_err(dev, "dpni_set_rx_hash_dist failed\n"); |
| |
| return err; |
| } |
| |
| /* Configure the Rx flow classification key */ |
| static int config_cls_key(struct dpaa2_eth_priv *priv, dma_addr_t key) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| struct dpni_rx_dist_cfg dist_cfg; |
| int err; |
| |
| memset(&dist_cfg, 0, sizeof(dist_cfg)); |
| |
| dist_cfg.key_cfg_iova = key; |
| dist_cfg.dist_size = dpaa2_eth_queue_count(priv); |
| dist_cfg.enable = 1; |
| |
| err = dpni_set_rx_fs_dist(priv->mc_io, 0, priv->mc_token, &dist_cfg); |
| if (err) |
| dev_err(dev, "dpni_set_rx_fs_dist failed\n"); |
| |
| return err; |
| } |
| |
| /* Size of the Rx flow classification key */ |
| int dpaa2_eth_cls_key_size(void) |
| { |
| int i, size = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(dist_fields); i++) |
| size += dist_fields[i].size; |
| |
| return size; |
| } |
| |
| /* Offset of header field in Rx classification key */ |
| int dpaa2_eth_cls_fld_off(int prot, int field) |
| { |
| int i, off = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { |
| if (dist_fields[i].cls_prot == prot && |
| dist_fields[i].cls_field == field) |
| return off; |
| off += dist_fields[i].size; |
| } |
| |
| WARN_ONCE(1, "Unsupported header field used for Rx flow cls\n"); |
| return 0; |
| } |
| |
| /* Set Rx distribution (hash or flow classification) key |
| * flags is a combination of RXH_ bits |
| */ |
| static int dpaa2_eth_set_dist_key(struct net_device *net_dev, |
| enum dpaa2_eth_rx_dist type, u64 flags) |
| { |
| struct device *dev = net_dev->dev.parent; |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| struct dpkg_profile_cfg cls_cfg; |
| u32 rx_hash_fields = 0; |
| dma_addr_t key_iova; |
| u8 *dma_mem; |
| int i; |
| int err = 0; |
| |
| memset(&cls_cfg, 0, sizeof(cls_cfg)); |
| |
| for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { |
| struct dpkg_extract *key = |
| &cls_cfg.extracts[cls_cfg.num_extracts]; |
| |
| /* For Rx hashing key we set only the selected fields. |
| * For Rx flow classification key we set all supported fields |
| */ |
| if (type == DPAA2_ETH_RX_DIST_HASH) { |
| if (!(flags & dist_fields[i].rxnfc_field)) |
| continue; |
| rx_hash_fields |= dist_fields[i].rxnfc_field; |
| } |
| |
| if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) { |
| dev_err(dev, "error adding key extraction rule, too many rules?\n"); |
| return -E2BIG; |
| } |
| |
| key->type = DPKG_EXTRACT_FROM_HDR; |
| key->extract.from_hdr.prot = dist_fields[i].cls_prot; |
| key->extract.from_hdr.type = DPKG_FULL_FIELD; |
| key->extract.from_hdr.field = dist_fields[i].cls_field; |
| cls_cfg.num_extracts++; |
| } |
| |
| dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL); |
| if (!dma_mem) |
| return -ENOMEM; |
| |
| err = dpni_prepare_key_cfg(&cls_cfg, dma_mem); |
| if (err) { |
| dev_err(dev, "dpni_prepare_key_cfg error %d\n", err); |
| goto free_key; |
| } |
| |
| /* Prepare for setting the rx dist */ |
| key_iova = dma_map_single(dev, dma_mem, DPAA2_CLASSIFIER_DMA_SIZE, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(dev, key_iova)) { |
| dev_err(dev, "DMA mapping failed\n"); |
| err = -ENOMEM; |
| goto free_key; |
| } |
| |
| if (type == DPAA2_ETH_RX_DIST_HASH) { |
| if (dpaa2_eth_has_legacy_dist(priv)) |
| err = config_legacy_hash_key(priv, key_iova); |
| else |
| err = config_hash_key(priv, key_iova); |
| } else { |
| err = config_cls_key(priv, key_iova); |
| } |
| |
| dma_unmap_single(dev, key_iova, DPAA2_CLASSIFIER_DMA_SIZE, |
| DMA_TO_DEVICE); |
| if (!err && type == DPAA2_ETH_RX_DIST_HASH) |
| priv->rx_hash_fields = rx_hash_fields; |
| |
| free_key: |
| kfree(dma_mem); |
| return err; |
| } |
| |
| int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags) |
| { |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| |
| if (!dpaa2_eth_hash_enabled(priv)) |
| return -EOPNOTSUPP; |
| |
| return dpaa2_eth_set_dist_key(net_dev, DPAA2_ETH_RX_DIST_HASH, flags); |
| } |
| |
| static int dpaa2_eth_set_cls(struct dpaa2_eth_priv *priv) |
| { |
| struct device *dev = priv->net_dev->dev.parent; |
| |
| /* Check if we actually support Rx flow classification */ |
| if (dpaa2_eth_has_legacy_dist(priv)) { |
| dev_dbg(dev, "Rx cls not supported by current MC version\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (priv->dpni_attrs.options & DPNI_OPT_NO_FS || |
| !(priv->dpni_attrs.options & DPNI_OPT_HAS_KEY_MASKING)) { |
| dev_dbg(dev, "Rx cls disabled in DPNI options\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (!dpaa2_eth_hash_enabled(priv)) { |
| dev_dbg(dev, "Rx cls disabled for single queue DPNIs\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| priv->rx_cls_enabled = 1; |
| |
| return dpaa2_eth_set_dist_key(priv->net_dev, DPAA2_ETH_RX_DIST_CLS, 0); |
| } |
| |
| /* Bind the DPNI to its needed objects and resources: buffer pool, DPIOs, |
| * frame queues and channels |
| */ |
| static int bind_dpni(struct dpaa2_eth_priv *priv) |
| { |
| struct net_device *net_dev = priv->net_dev; |
| struct device *dev = net_dev->dev.parent; |
| struct dpni_pools_cfg pools_params; |
| struct dpni_error_cfg err_cfg; |
| int err = 0; |
| int i; |
| |
| pools_params.num_dpbp = 1; |
| pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id; |
| pools_params.pools[0].backup_pool = 0; |
| pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE; |
| err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params); |
| if (err) { |
| dev_err(dev, "dpni_set_pools() failed\n"); |
| return err; |
| } |
| |
| /* have the interface implicitly distribute traffic based on |
| * the default hash key |
| */ |
| err = dpaa2_eth_set_hash(net_dev, DPAA2_RXH_DEFAULT); |
| if (err && err != -EOPNOTSUPP) |
| dev_err(dev, "Failed to configure hashing\n"); |
| |
| /* Configure the flow classification key; it includes all |
| * supported header fields and cannot be modified at runtime |
| */ |
| err = dpaa2_eth_set_cls(priv); |
| if (err && err != -EOPNOTSUPP) |
| dev_err(dev, "Failed to configure Rx classification key\n"); |
| |
| /* Configure handling of error frames */ |
| err_cfg.errors = DPAA2_FAS_RX_ERR_MASK; |
| err_cfg.set_frame_annotation = 1; |
| err_cfg.error_action = DPNI_ERROR_ACTION_DISCARD; |
| err = dpni_set_errors_behavior(priv->mc_io, 0, priv->mc_token, |
| &err_cfg); |
| if (err) { |
| dev_err(dev, "dpni_set_errors_behavior failed\n"); |
| return err; |
| } |
| |
| /* Configure Rx and Tx conf queues to generate CDANs */ |
| for (i = 0; i < priv->num_fqs; i++) { |
| switch (priv->fq[i].type) { |
| case DPAA2_RX_FQ: |
| err = setup_rx_flow(priv, &priv->fq[i]); |
| break; |
| case DPAA2_TX_CONF_FQ: |
| err = setup_tx_flow(priv, &priv->fq[i]); |
| break; |
| default: |
| dev_err(dev, "Invalid FQ type %d\n", priv->fq[i].type); |
| return -EINVAL; |
| } |
| if (err) |
| return err; |
| } |
| |
| err = dpni_get_qdid(priv->mc_io, 0, priv->mc_token, |
| DPNI_QUEUE_TX, &priv->tx_qdid); |
| if (err) { |
| dev_err(dev, "dpni_get_qdid() failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Allocate rings for storing incoming frame descriptors */ |
| static int alloc_rings(struct dpaa2_eth_priv *priv) |
| { |
| struct net_device *net_dev = priv->net_dev; |
| struct device *dev = net_dev->dev.parent; |
| int i; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| priv->channel[i]->store = |
| dpaa2_io_store_create(DPAA2_ETH_STORE_SIZE, dev); |
| if (!priv->channel[i]->store) { |
| netdev_err(net_dev, "dpaa2_io_store_create() failed\n"); |
| goto err_ring; |
| } |
| } |
| |
| return 0; |
| |
| err_ring: |
| for (i = 0; i < priv->num_channels; i++) { |
| if (!priv->channel[i]->store) |
| break; |
| dpaa2_io_store_destroy(priv->channel[i]->store); |
| } |
| |
| return -ENOMEM; |
| } |
| |
| static void free_rings(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| |
| for (i = 0; i < priv->num_channels; i++) |
| dpaa2_io_store_destroy(priv->channel[i]->store); |
| } |
| |
| static int set_mac_addr(struct dpaa2_eth_priv *priv) |
| { |
| struct net_device *net_dev = priv->net_dev; |
| struct device *dev = net_dev->dev.parent; |
| u8 mac_addr[ETH_ALEN], dpni_mac_addr[ETH_ALEN]; |
| int err; |
| |
| /* Get firmware address, if any */ |
| err = dpni_get_port_mac_addr(priv->mc_io, 0, priv->mc_token, mac_addr); |
| if (err) { |
| dev_err(dev, "dpni_get_port_mac_addr() failed\n"); |
| return err; |
| } |
| |
| /* Get DPNI attributes address, if any */ |
| err = dpni_get_primary_mac_addr(priv->mc_io, 0, priv->mc_token, |
| dpni_mac_addr); |
| if (err) { |
| dev_err(dev, "dpni_get_primary_mac_addr() failed\n"); |
| return err; |
| } |
| |
| /* First check if firmware has any address configured by bootloader */ |
| if (!is_zero_ether_addr(mac_addr)) { |
| /* If the DPMAC addr != DPNI addr, update it */ |
| if (!ether_addr_equal(mac_addr, dpni_mac_addr)) { |
| err = dpni_set_primary_mac_addr(priv->mc_io, 0, |
| priv->mc_token, |
| mac_addr); |
| if (err) { |
| dev_err(dev, "dpni_set_primary_mac_addr() failed\n"); |
| return err; |
| } |
| } |
| memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len); |
| } else if (is_zero_ether_addr(dpni_mac_addr)) { |
| /* No MAC address configured, fill in net_dev->dev_addr |
| * with a random one |
| */ |
| eth_hw_addr_random(net_dev); |
| dev_dbg_once(dev, "device(s) have all-zero hwaddr, replaced with random\n"); |
| |
| err = dpni_set_primary_mac_addr(priv->mc_io, 0, priv->mc_token, |
| net_dev->dev_addr); |
| if (err) { |
| dev_err(dev, "dpni_set_primary_mac_addr() failed\n"); |
| return err; |
| } |
| |
| /* Override NET_ADDR_RANDOM set by eth_hw_addr_random(); for all |
| * practical purposes, this will be our "permanent" mac address, |
| * at least until the next reboot. This move will also permit |
| * register_netdevice() to properly fill up net_dev->perm_addr. |
| */ |
| net_dev->addr_assign_type = NET_ADDR_PERM; |
| } else { |
| /* NET_ADDR_PERM is default, all we have to do is |
| * fill in the device addr. |
| */ |
| memcpy(net_dev->dev_addr, dpni_mac_addr, net_dev->addr_len); |
| } |
| |
| return 0; |
| } |
| |
| static int netdev_init(struct net_device *net_dev) |
| { |
| struct device *dev = net_dev->dev.parent; |
| struct dpaa2_eth_priv *priv = netdev_priv(net_dev); |
| u32 options = priv->dpni_attrs.options; |
| u64 supported = 0, not_supported = 0; |
| u8 bcast_addr[ETH_ALEN]; |
| u8 num_queues; |
| int err; |
| |
| net_dev->netdev_ops = &dpaa2_eth_ops; |
| net_dev->ethtool_ops = &dpaa2_ethtool_ops; |
| |
| err = set_mac_addr(priv); |
| if (err) |
| return err; |
| |
| /* Explicitly add the broadcast address to the MAC filtering table */ |
| eth_broadcast_addr(bcast_addr); |
| err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, bcast_addr); |
| if (err) { |
| dev_err(dev, "dpni_add_mac_addr() failed\n"); |
| return err; |
| } |
| |
| /* Set MTU upper limit; lower limit is 68B (default value) */ |
| net_dev->max_mtu = DPAA2_ETH_MAX_MTU; |
| err = dpni_set_max_frame_length(priv->mc_io, 0, priv->mc_token, |
| DPAA2_ETH_MFL); |
| if (err) { |
| dev_err(dev, "dpni_set_max_frame_length() failed\n"); |
| return err; |
| } |
| |
| /* Set actual number of queues in the net device */ |
| num_queues = dpaa2_eth_queue_count(priv); |
| err = netif_set_real_num_tx_queues(net_dev, num_queues); |
| if (err) { |
| dev_err(dev, "netif_set_real_num_tx_queues() failed\n"); |
| return err; |
| } |
| err = netif_set_real_num_rx_queues(net_dev, num_queues); |
| if (err) { |
| dev_err(dev, "netif_set_real_num_rx_queues() failed\n"); |
| return err; |
| } |
| |
| /* Capabilities listing */ |
| supported |= IFF_LIVE_ADDR_CHANGE; |
| |
| if (options & DPNI_OPT_NO_MAC_FILTER) |
| not_supported |= IFF_UNICAST_FLT; |
| else |
| supported |= IFF_UNICAST_FLT; |
| |
| net_dev->priv_flags |= supported; |
| net_dev->priv_flags &= ~not_supported; |
| |
| /* Features */ |
| net_dev->features = NETIF_F_RXCSUM | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | |
| NETIF_F_SG | NETIF_F_HIGHDMA | |
| NETIF_F_LLTX; |
| net_dev->hw_features = net_dev->features; |
| |
| return 0; |
| } |
| |
| static int poll_link_state(void *arg) |
| { |
| struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)arg; |
| int err; |
| |
| while (!kthread_should_stop()) { |
| err = link_state_update(priv); |
| if (unlikely(err)) |
| return err; |
| |
| msleep(DPAA2_ETH_LINK_STATE_REFRESH); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) |
| { |
| u32 status = ~0; |
| struct device *dev = (struct device *)arg; |
| struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev); |
| struct net_device *net_dev = dev_get_drvdata(dev); |
| int err; |
| |
| err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle, |
| DPNI_IRQ_INDEX, &status); |
| if (unlikely(err)) { |
| netdev_err(net_dev, "Can't get irq status (err %d)\n", err); |
| return IRQ_HANDLED; |
| } |
| |
| if (status & DPNI_IRQ_EVENT_LINK_CHANGED) |
| link_state_update(netdev_priv(net_dev)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int setup_irqs(struct fsl_mc_device *ls_dev) |
| { |
| int err = 0; |
| struct fsl_mc_device_irq *irq; |
| |
| err = fsl_mc_allocate_irqs(ls_dev); |
| if (err) { |
| dev_err(&ls_dev->dev, "MC irqs allocation failed\n"); |
| return err; |
| } |
| |
| irq = ls_dev->irqs[0]; |
| err = devm_request_threaded_irq(&ls_dev->dev, irq->msi_desc->irq, |
| NULL, dpni_irq0_handler_thread, |
| IRQF_NO_SUSPEND | IRQF_ONESHOT, |
| dev_name(&ls_dev->dev), &ls_dev->dev); |
| if (err < 0) { |
| dev_err(&ls_dev->dev, "devm_request_threaded_irq(): %d\n", err); |
| goto free_mc_irq; |
| } |
| |
| err = dpni_set_irq_mask(ls_dev->mc_io, 0, ls_dev->mc_handle, |
| DPNI_IRQ_INDEX, DPNI_IRQ_EVENT_LINK_CHANGED); |
| if (err < 0) { |
| dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d\n", err); |
| goto free_irq; |
| } |
| |
| err = dpni_set_irq_enable(ls_dev->mc_io, 0, ls_dev->mc_handle, |
| DPNI_IRQ_INDEX, 1); |
| if (err < 0) { |
| dev_err(&ls_dev->dev, "dpni_set_irq_enable(): %d\n", err); |
| goto free_irq; |
| } |
| |
| return 0; |
| |
| free_irq: |
| devm_free_irq(&ls_dev->dev, irq->msi_desc->irq, &ls_dev->dev); |
| free_mc_irq: |
| fsl_mc_free_irqs(ls_dev); |
| |
| return err; |
| } |
| |
| static void add_ch_napi(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| struct dpaa2_eth_channel *ch; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| /* NAPI weight *MUST* be a multiple of DPAA2_ETH_STORE_SIZE */ |
| netif_napi_add(priv->net_dev, &ch->napi, dpaa2_eth_poll, |
| NAPI_POLL_WEIGHT); |
| } |
| } |
| |
| static void del_ch_napi(struct dpaa2_eth_priv *priv) |
| { |
| int i; |
| struct dpaa2_eth_channel *ch; |
| |
| for (i = 0; i < priv->num_channels; i++) { |
| ch = priv->channel[i]; |
| netif_napi_del(&ch->napi); |
| } |
| } |
| |
| static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) |
| { |
| struct device *dev; |
| struct net_device *net_dev = NULL; |
| struct dpaa2_eth_priv *priv = NULL; |
| int err = 0; |
| |
| dev = &dpni_dev->dev; |
| |
| /* Net device */ |
| net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA2_ETH_MAX_TX_QUEUES); |
| if (!net_dev) { |
| dev_err(dev, "alloc_etherdev_mq() failed\n"); |
| return -ENOMEM; |
| } |
| |
| SET_NETDEV_DEV(net_dev, dev); |
| dev_set_drvdata(dev, net_dev); |
| |
| priv = netdev_priv(net_dev); |
| priv->net_dev = net_dev; |
| |
| priv->iommu_domain = iommu_get_domain_for_dev(dev); |
| |
| /* Obtain a MC portal */ |
| err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, |
| &priv->mc_io); |
| if (err) { |
| if (err == -ENXIO) |
| err = -EPROBE_DEFER; |
| else |
| dev_err(dev, "MC portal allocation failed\n"); |
| goto err_portal_alloc; |
| } |
| |
| /* MC objects initialization and configuration */ |
| err = setup_dpni(dpni_dev); |
| if (err) |
| goto err_dpni_setup; |
| |
| err = setup_dpio(priv); |
| if (err) |
| goto err_dpio_setup; |
| |
| setup_fqs(priv); |
| |
| err = setup_dpbp(priv); |
| if (err) |
| goto err_dpbp_setup; |
| |
| err = bind_dpni(priv); |
| if (err) |
| goto err_bind; |
| |
| /* Add a NAPI context for each channel */ |
| add_ch_napi(priv); |
| |
| /* Percpu statistics */ |
| priv->percpu_stats = alloc_percpu(*priv->percpu_stats); |
| if (!priv->percpu_stats) { |
| dev_err(dev, "alloc_percpu(percpu_stats) failed\n"); |
| err = -ENOMEM; |
| goto err_alloc_percpu_stats; |
| } |
| priv->percpu_extras = alloc_percpu(*priv->percpu_extras); |
| if (!priv->percpu_extras) { |
| dev_err(dev, "alloc_percpu(percpu_extras) failed\n"); |
| err = -ENOMEM; |
| goto err_alloc_percpu_extras; |
| } |
| |
| err = netdev_init(net_dev); |
| if (err) |
| goto err_netdev_init; |
| |
| /* Configure checksum offload based on current interface flags */ |
| err = set_rx_csum(priv, !!(net_dev->features & NETIF_F_RXCSUM)); |
| if (err) |
| goto err_csum; |
| |
| err = set_tx_csum(priv, !!(net_dev->features & |
| (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))); |
| if (err) |
| goto err_csum; |
| |
| err = alloc_rings(priv); |
| if (err) |
| goto err_alloc_rings; |
| |
| err = setup_irqs(dpni_dev); |
| if (err) { |
| netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n"); |
| priv->poll_thread = kthread_run(poll_link_state, priv, |
| "%s_poll_link", net_dev->name); |
| if (IS_ERR(priv->poll_thread)) { |
| dev_err(dev, "Error starting polling thread\n"); |
| goto err_poll_thread; |
| } |
| priv->do_link_poll = true; |
| } |
| |
| err = register_netdev(net_dev); |
| if (err < 0) { |
| dev_err(dev, "register_netdev() failed\n"); |
| goto err_netdev_reg; |
| } |
| |
| dev_info(dev, "Probed interface %s\n", net_dev->name); |
| return 0; |
| |
| err_netdev_reg: |
| if (priv->do_link_poll) |
| kthread_stop(priv->poll_thread); |
| else |
| fsl_mc_free_irqs(dpni_dev); |
| err_poll_thread: |
| free_rings(priv); |
| err_alloc_rings: |
| err_csum: |
| err_netdev_init: |
| free_percpu(priv->percpu_extras); |
| err_alloc_percpu_extras: |
| free_percpu(priv->percpu_stats); |
| err_alloc_percpu_stats: |
| del_ch_napi(priv); |
| err_bind: |
| free_dpbp(priv); |
| err_dpbp_setup: |
| free_dpio(priv); |
| err_dpio_setup: |
| free_dpni(priv); |
| err_dpni_setup: |
| fsl_mc_portal_free(priv->mc_io); |
| err_portal_alloc: |
| dev_set_drvdata(dev, NULL); |
| free_netdev(net_dev); |
| |
| return err; |
| } |
| |
| static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev) |
| { |
| struct device *dev; |
| struct net_device *net_dev; |
| struct dpaa2_eth_priv *priv; |
| |
| dev = &ls_dev->dev; |
| net_dev = dev_get_drvdata(dev); |
| priv = netdev_priv(net_dev); |
| |
| unregister_netdev(net_dev); |
| |
| if (priv->do_link_poll) |
| kthread_stop(priv->poll_thread); |
| else |
| fsl_mc_free_irqs(ls_dev); |
| |
| free_rings(priv); |
| free_percpu(priv->percpu_stats); |
| free_percpu(priv->percpu_extras); |
| |
| del_ch_napi(priv); |
| free_dpbp(priv); |
| free_dpio(priv); |
| free_dpni(priv); |
| |
| fsl_mc_portal_free(priv->mc_io); |
| |
| free_netdev(net_dev); |
| |
| dev_dbg(net_dev->dev.parent, "Removed interface %s\n", net_dev->name); |
| |
| return 0; |
| } |
| |
| static const struct fsl_mc_device_id dpaa2_eth_match_id_table[] = { |
| { |
| .vendor = FSL_MC_VENDOR_FREESCALE, |
| .obj_type = "dpni", |
| }, |
| { .vendor = 0x0 } |
| }; |
| MODULE_DEVICE_TABLE(fslmc, dpaa2_eth_match_id_table); |
| |
| static struct fsl_mc_driver dpaa2_eth_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| }, |
| .probe = dpaa2_eth_probe, |
| .remove = dpaa2_eth_remove, |
| .match_id_table = dpaa2_eth_match_id_table |
| }; |
| |
| module_fsl_mc_driver(dpaa2_eth_driver); |