arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>

/dts-v1/;

#include "sun50i-h6.dtsi"
#include "sun50i-h6-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Tanix TX6";
	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	connector {
		compatible = "hdmi-connector";
		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	reg_vcc1v8: regulator-vcc1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vcc1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	reg_vcc3v3: regulator-vcc3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
		compatible = "regulator-fixed";
		regulator-name = "vdd-cpu-gpu";
		regulator-min-microvolt = <1135000>;
		regulator-max-microvolt = <1135000>;
	};
};

&cpu0 {
	cpu-supply = <&reg_vdd_cpu_gpu>;
};

&de {
	status = "okay";
};

&dwc3 {
	status = "okay";
};

&ehci0 {
	status = "okay";
};

&ehci3 {
	status = "okay";
};

&gpu {
	mali-supply = <&reg_vdd_cpu_gpu>;
	status = "okay";
};

&hdmi {
	status = "okay";
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&reg_vcc3v3>;
	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
	bus-width = <4>;
	status = "okay";
};

&mmc2 {
	vmmc-supply = <&reg_vcc3v3>;
	vqmmc-supply = <&reg_vcc1v8>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	mmc-hs200-1_8v;
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&ohci3 {
	status = "okay";
};

&pio {
	vcc-pc-supply = <&reg_vcc1v8>;
	vcc-pd-supply = <&reg_vcc3v3>;
	vcc-pg-supply = <&reg_vcc1v8>;
};

&r_ir {
	linux,rc-map-name = "rc-tanix-tx5max";
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_ph_pins>;
	status = "okay";
};

&usb2otg {
	dr_mode = "host";
	status = "okay";
};

&usb2phy {
	status = "okay";
};

&usb3phy {
	status = "okay";
};