| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright © 2018-2020 Intel Corporation |
| */ |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_plane_helper.h> |
| |
| #include "kmb_drv.h" |
| #include "kmb_plane.h" |
| #include "kmb_regs.h" |
| |
| const u32 layer_irqs[] = { |
| LCD_INT_VL0, |
| LCD_INT_VL1, |
| LCD_INT_GL0, |
| LCD_INT_GL1 |
| }; |
| |
| /* Conversion (yuv->rgb) matrix from myriadx */ |
| static const u32 csc_coef_lcd[] = { |
| 1024, 0, 1436, |
| 1024, -352, -731, |
| 1024, 1814, 0, |
| -179, 125, -226 |
| }; |
| |
| /* Graphics layer (layers 2 & 3) formats, only packed formats are supported */ |
| static const u32 kmb_formats_g[] = { |
| DRM_FORMAT_RGB332, |
| DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444, |
| DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444, |
| DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555, |
| DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555, |
| DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, |
| DRM_FORMAT_RGB888, DRM_FORMAT_BGR888, |
| DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888, |
| }; |
| |
| /* Video layer ( 0 & 1) formats, packed and planar formats are supported */ |
| static const u32 kmb_formats_v[] = { |
| /* packed formats */ |
| DRM_FORMAT_RGB332, |
| DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444, |
| DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444, |
| DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555, |
| DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555, |
| DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, |
| DRM_FORMAT_RGB888, DRM_FORMAT_BGR888, |
| DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888, |
| /*planar formats */ |
| DRM_FORMAT_YUV420, DRM_FORMAT_YVU420, |
| DRM_FORMAT_YUV422, DRM_FORMAT_YVU422, |
| DRM_FORMAT_YUV444, DRM_FORMAT_YVU444, |
| DRM_FORMAT_NV12, DRM_FORMAT_NV21, |
| }; |
| |
| static unsigned int check_pixel_format(struct drm_plane *plane, u32 format) |
| { |
| struct kmb_drm_private *kmb; |
| struct kmb_plane *kmb_plane = to_kmb_plane(plane); |
| int i; |
| int plane_id = kmb_plane->id; |
| struct disp_cfg init_disp_cfg; |
| |
| kmb = to_kmb(plane->dev); |
| init_disp_cfg = kmb->init_disp_cfg[plane_id]; |
| /* Due to HW limitations, changing pixel format after initial |
| * plane configuration is not supported. |
| */ |
| if (init_disp_cfg.format && init_disp_cfg.format != format) { |
| drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration"); |
| return -EINVAL; |
| } |
| for (i = 0; i < plane->format_count; i++) { |
| if (plane->format_types[i] == format) |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int kmb_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct kmb_drm_private *kmb; |
| struct kmb_plane *kmb_plane = to_kmb_plane(plane); |
| int plane_id = kmb_plane->id; |
| struct disp_cfg init_disp_cfg; |
| struct drm_framebuffer *fb; |
| int ret; |
| struct drm_crtc_state *crtc_state; |
| bool can_position; |
| |
| kmb = to_kmb(plane->dev); |
| init_disp_cfg = kmb->init_disp_cfg[plane_id]; |
| fb = new_plane_state->fb; |
| if (!fb || !new_plane_state->crtc) |
| return 0; |
| |
| ret = check_pixel_format(plane, fb->format->format); |
| if (ret) |
| return ret; |
| |
| if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH || |
| new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT || |
| new_plane_state->crtc_w < KMB_FB_MIN_WIDTH || |
| new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT) |
| return -EINVAL; |
| |
| /* Due to HW limitations, changing plane height or width after |
| * initial plane configuration is not supported. |
| */ |
| if ((init_disp_cfg.width && init_disp_cfg.height) && |
| (init_disp_cfg.width != fb->width || |
| init_disp_cfg.height != fb->height)) { |
| drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration"); |
| return -EINVAL; |
| } |
| can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY); |
| crtc_state = |
| drm_atomic_get_existing_crtc_state(state, |
| new_plane_state->crtc); |
| return drm_atomic_helper_check_plane_state(new_plane_state, |
| crtc_state, |
| DRM_PLANE_HELPER_NO_SCALING, |
| DRM_PLANE_HELPER_NO_SCALING, |
| can_position, true); |
| } |
| |
| static void kmb_plane_atomic_disable(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct kmb_plane *kmb_plane = to_kmb_plane(plane); |
| int plane_id = kmb_plane->id; |
| struct kmb_drm_private *kmb; |
| |
| kmb = to_kmb(plane->dev); |
| |
| if (WARN_ON(plane_id >= KMB_MAX_PLANES)) |
| return; |
| |
| switch (plane_id) { |
| case LAYER_0: |
| kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL1_ENABLE; |
| break; |
| case LAYER_1: |
| kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE; |
| break; |
| } |
| |
| kmb->plane_status[plane_id].disable = true; |
| } |
| |
| static unsigned int get_pixel_format(u32 format) |
| { |
| unsigned int val = 0; |
| |
| switch (format) { |
| /* planar formats */ |
| case DRM_FORMAT_YUV444: |
| val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE; |
| break; |
| case DRM_FORMAT_YVU444: |
| val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE |
| | LCD_LAYER_CRCB_ORDER; |
| break; |
| case DRM_FORMAT_YUV422: |
| val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE; |
| break; |
| case DRM_FORMAT_YVU422: |
| val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE |
| | LCD_LAYER_CRCB_ORDER; |
| break; |
| case DRM_FORMAT_YUV420: |
| val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE; |
| break; |
| case DRM_FORMAT_YVU420: |
| val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE |
| | LCD_LAYER_CRCB_ORDER; |
| break; |
| case DRM_FORMAT_NV12: |
| val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE; |
| break; |
| case DRM_FORMAT_NV21: |
| val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE |
| | LCD_LAYER_CRCB_ORDER; |
| break; |
| /* packed formats */ |
| /* looks hw requires B & G to be swapped when RGB */ |
| case DRM_FORMAT_RGB332: |
| val = LCD_LAYER_FORMAT_RGB332 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_XBGR4444: |
| val = LCD_LAYER_FORMAT_RGBX4444; |
| break; |
| case DRM_FORMAT_ARGB4444: |
| val = LCD_LAYER_FORMAT_RGBA4444 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_ABGR4444: |
| val = LCD_LAYER_FORMAT_RGBA4444; |
| break; |
| case DRM_FORMAT_XRGB1555: |
| val = LCD_LAYER_FORMAT_XRGB1555 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_XBGR1555: |
| val = LCD_LAYER_FORMAT_XRGB1555; |
| break; |
| case DRM_FORMAT_ARGB1555: |
| val = LCD_LAYER_FORMAT_RGBA1555 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_ABGR1555: |
| val = LCD_LAYER_FORMAT_RGBA1555; |
| break; |
| case DRM_FORMAT_RGB565: |
| val = LCD_LAYER_FORMAT_RGB565 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_BGR565: |
| val = LCD_LAYER_FORMAT_RGB565; |
| break; |
| case DRM_FORMAT_RGB888: |
| val = LCD_LAYER_FORMAT_RGB888 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_BGR888: |
| val = LCD_LAYER_FORMAT_RGB888; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| val = LCD_LAYER_FORMAT_RGBX8888 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_XBGR8888: |
| val = LCD_LAYER_FORMAT_RGBX8888; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| val = LCD_LAYER_FORMAT_RGBA8888 | LCD_LAYER_BGR_ORDER; |
| break; |
| case DRM_FORMAT_ABGR8888: |
| val = LCD_LAYER_FORMAT_RGBA8888; |
| break; |
| } |
| DRM_INFO_ONCE("%s : %d format=0x%x val=0x%x\n", |
| __func__, __LINE__, format, val); |
| return val; |
| } |
| |
| static unsigned int get_bits_per_pixel(const struct drm_format_info *format) |
| { |
| u32 bpp = 0; |
| unsigned int val = 0; |
| |
| if (format->num_planes > 1) { |
| val = LCD_LAYER_8BPP; |
| return val; |
| } |
| |
| bpp += 8 * format->cpp[0]; |
| |
| switch (bpp) { |
| case 8: |
| val = LCD_LAYER_8BPP; |
| break; |
| case 16: |
| val = LCD_LAYER_16BPP; |
| break; |
| case 24: |
| val = LCD_LAYER_24BPP; |
| break; |
| case 32: |
| val = LCD_LAYER_32BPP; |
| break; |
| } |
| |
| DRM_DEBUG("bpp=%d val=0x%x\n", bpp, val); |
| return val; |
| } |
| |
| static void config_csc(struct kmb_drm_private *kmb, int plane_id) |
| { |
| /* YUV to RGB conversion using the fixed matrix csc_coef_lcd */ |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF11(plane_id), csc_coef_lcd[0]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF12(plane_id), csc_coef_lcd[1]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF13(plane_id), csc_coef_lcd[2]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF21(plane_id), csc_coef_lcd[3]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF22(plane_id), csc_coef_lcd[4]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF23(plane_id), csc_coef_lcd[5]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF31(plane_id), csc_coef_lcd[6]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF32(plane_id), csc_coef_lcd[7]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF33(plane_id), csc_coef_lcd[8]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF1(plane_id), csc_coef_lcd[9]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF2(plane_id), csc_coef_lcd[10]); |
| kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]); |
| } |
| |
| static void kmb_plane_set_alpha(struct kmb_drm_private *kmb, |
| const struct drm_plane_state *state, |
| unsigned char plane_id, |
| unsigned int *val) |
| { |
| u16 plane_alpha = state->alpha; |
| u16 pixel_blend_mode = state->pixel_blend_mode; |
| int has_alpha = state->fb->format->has_alpha; |
| |
| if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE) |
| *val |= LCD_LAYER_ALPHA_STATIC; |
| |
| if (has_alpha) { |
| switch (pixel_blend_mode) { |
| case DRM_MODE_BLEND_PIXEL_NONE: |
| break; |
| case DRM_MODE_BLEND_PREMULTI: |
| *val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT; |
| break; |
| case DRM_MODE_BLEND_COVERAGE: |
| *val |= LCD_LAYER_ALPHA_EMBED; |
| break; |
| default: |
| DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n", |
| __stringify(pixel_blend_mode), |
| (long)pixel_blend_mode); |
| break; |
| } |
| } |
| |
| if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) { |
| *val &= LCD_LAYER_ALPHA_DISABLED; |
| return; |
| } |
| |
| kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha); |
| } |
| |
| static void kmb_plane_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, |
| plane); |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct drm_framebuffer *fb; |
| struct kmb_drm_private *kmb; |
| unsigned int width; |
| unsigned int height; |
| unsigned int dma_len; |
| struct kmb_plane *kmb_plane; |
| unsigned int dma_cfg; |
| unsigned int ctrl = 0, val = 0, out_format = 0; |
| unsigned int src_w, src_h, crtc_x, crtc_y; |
| unsigned char plane_id; |
| int num_planes; |
| static dma_addr_t addr[MAX_SUB_PLANES]; |
| struct disp_cfg *init_disp_cfg; |
| |
| if (!plane || !new_plane_state || !old_plane_state) |
| return; |
| |
| fb = new_plane_state->fb; |
| if (!fb) |
| return; |
| |
| num_planes = fb->format->num_planes; |
| kmb_plane = to_kmb_plane(plane); |
| |
| kmb = to_kmb(plane->dev); |
| plane_id = kmb_plane->id; |
| |
| spin_lock_irq(&kmb->irq_lock); |
| if (kmb->kmb_under_flow || kmb->kmb_flush_done) { |
| spin_unlock_irq(&kmb->irq_lock); |
| drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning"); |
| return; |
| } |
| spin_unlock_irq(&kmb->irq_lock); |
| |
| init_disp_cfg = &kmb->init_disp_cfg[plane_id]; |
| src_w = new_plane_state->src_w >> 16; |
| src_h = new_plane_state->src_h >> 16; |
| crtc_x = new_plane_state->crtc_x; |
| crtc_y = new_plane_state->crtc_y; |
| |
| drm_dbg(&kmb->drm, |
| "src_w=%d src_h=%d, fb->format->format=0x%x fb->flags=0x%x\n", |
| src_w, src_h, fb->format->format, fb->flags); |
| |
| width = fb->width; |
| height = fb->height; |
| dma_len = (width * height * fb->format->cpp[0]); |
| drm_dbg(&kmb->drm, "dma_len=%d ", dma_len); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN(plane_id), dma_len); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id), |
| fb->pitches[0]); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_WIDTH(plane_id), |
| (width * fb->format->cpp[0])); |
| |
| addr[Y_PLANE] = drm_fb_cma_get_gem_addr(fb, new_plane_state, 0); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_START_ADDR(plane_id), |
| addr[Y_PLANE] + fb->offsets[0]); |
| val = get_pixel_format(fb->format->format); |
| val |= get_bits_per_pixel(fb->format); |
| /* Program Cb/Cr for planar formats */ |
| if (num_planes > 1) { |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id), |
| width * fb->format->cpp[0]); |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id), |
| (width * fb->format->cpp[0])); |
| |
| addr[U_PLANE] = drm_fb_cma_get_gem_addr(fb, new_plane_state, |
| U_PLANE); |
| /* check if Cb/Cr is swapped*/ |
| if (num_planes == 3 && (val & LCD_LAYER_CRCB_ORDER)) |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_START_CR_ADR(plane_id), |
| addr[U_PLANE]); |
| else |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_START_CB_ADR(plane_id), |
| addr[U_PLANE]); |
| |
| if (num_planes == 3) { |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id), |
| ((width) * fb->format->cpp[0])); |
| |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id), |
| ((width) * fb->format->cpp[0])); |
| |
| addr[V_PLANE] = drm_fb_cma_get_gem_addr(fb, |
| new_plane_state, |
| V_PLANE); |
| |
| /* check if Cb/Cr is swapped*/ |
| if (val & LCD_LAYER_CRCB_ORDER) |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_START_CB_ADR(plane_id), |
| addr[V_PLANE]); |
| else |
| kmb_write_lcd(kmb, |
| LCD_LAYERn_DMA_START_CR_ADR(plane_id), |
| addr[V_PLANE]); |
| } |
| } |
| |
| kmb_write_lcd(kmb, LCD_LAYERn_WIDTH(plane_id), src_w - 1); |
| kmb_write_lcd(kmb, LCD_LAYERn_HEIGHT(plane_id), src_h - 1); |
| kmb_write_lcd(kmb, LCD_LAYERn_COL_START(plane_id), crtc_x); |
| kmb_write_lcd(kmb, LCD_LAYERn_ROW_START(plane_id), crtc_y); |
| |
| val |= LCD_LAYER_FIFO_100; |
| |
| if (val & LCD_LAYER_PLANAR_STORAGE) { |
| val |= LCD_LAYER_CSC_EN; |
| |
| /* Enable CSC if input is planar and output is RGB */ |
| config_csc(kmb, plane_id); |
| } |
| |
| kmb_plane_set_alpha(kmb, plane->state, plane_id, &val); |
| |
| kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val); |
| |
| /* Configure LCD_CONTROL */ |
| ctrl = kmb_read_lcd(kmb, LCD_CONTROL); |
| |
| /* Set layer blending config */ |
| ctrl &= ~LCD_CTRL_ALPHA_ALL; |
| ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 | |
| LCD_CTRL_ALPHA_BLEND_VL2; |
| |
| ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE; |
| |
| switch (plane_id) { |
| case LAYER_0: |
| ctrl |= LCD_CTRL_VL1_ENABLE; |
| break; |
| case LAYER_1: |
| ctrl |= LCD_CTRL_VL2_ENABLE; |
| break; |
| case LAYER_2: |
| ctrl |= LCD_CTRL_GL1_ENABLE; |
| break; |
| case LAYER_3: |
| ctrl |= LCD_CTRL_GL2_ENABLE; |
| break; |
| } |
| |
| ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE |
| | LCD_CTRL_CONTINUOUS | LCD_CTRL_OUTPUT_ENABLED; |
| |
| /* LCD is connected to MIPI on kmb |
| * Therefore this bit is required for DSI Tx |
| */ |
| ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL; |
| |
| kmb_write_lcd(kmb, LCD_CONTROL, ctrl); |
| |
| /* Enable pipeline AXI read transactions for the DMA |
| * after setting graphics layers. This must be done |
| * in a separate write cycle. |
| */ |
| kmb_set_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA); |
| |
| /* FIXME no doc on how to set output format, these values are taken |
| * from the Myriadx tests |
| */ |
| out_format |= LCD_OUTF_FORMAT_RGB888; |
| |
| /* Leave RGB order,conversion mode and clip mode to default */ |
| /* do not interleave RGB channels for mipi Tx compatibility */ |
| out_format |= LCD_OUTF_MIPI_RGB_MODE; |
| kmb_write_lcd(kmb, LCD_OUT_FORMAT_CFG, out_format); |
| |
| dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_VSTRIDE_EN | |
| LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_16; |
| |
| /* Enable DMA */ |
| kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg); |
| |
| /* Save initial display config */ |
| if (!init_disp_cfg->width || |
| !init_disp_cfg->height || |
| !init_disp_cfg->format) { |
| init_disp_cfg->width = width; |
| init_disp_cfg->height = height; |
| init_disp_cfg->format = fb->format->format; |
| } |
| |
| drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg, |
| kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id))); |
| |
| kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF | |
| LCD_INT_DMA_ERR); |
| kmb_set_bitmask_lcd(kmb, LCD_INT_ENABLE, LCD_INT_EOF | |
| LCD_INT_DMA_ERR); |
| } |
| |
| static const struct drm_plane_helper_funcs kmb_plane_helper_funcs = { |
| .atomic_check = kmb_plane_atomic_check, |
| .atomic_update = kmb_plane_atomic_update, |
| .atomic_disable = kmb_plane_atomic_disable |
| }; |
| |
| void kmb_plane_destroy(struct drm_plane *plane) |
| { |
| struct kmb_plane *kmb_plane = to_kmb_plane(plane); |
| |
| drm_plane_cleanup(plane); |
| kfree(kmb_plane); |
| } |
| |
| static const struct drm_plane_funcs kmb_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = kmb_plane_destroy, |
| .reset = drm_atomic_helper_plane_reset, |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| }; |
| |
| struct kmb_plane *kmb_plane_init(struct drm_device *drm) |
| { |
| struct kmb_drm_private *kmb = to_kmb(drm); |
| struct kmb_plane *plane = NULL; |
| struct kmb_plane *primary = NULL; |
| int i = 0; |
| int ret = 0; |
| enum drm_plane_type plane_type; |
| const u32 *plane_formats; |
| int num_plane_formats; |
| unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | |
| BIT(DRM_MODE_BLEND_PREMULTI) | |
| BIT(DRM_MODE_BLEND_COVERAGE); |
| |
| for (i = 0; i < KMB_MAX_PLANES; i++) { |
| plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL); |
| |
| if (!plane) { |
| drm_err(drm, "Failed to allocate plane\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : |
| DRM_PLANE_TYPE_OVERLAY; |
| if (i < 2) { |
| plane_formats = kmb_formats_v; |
| num_plane_formats = ARRAY_SIZE(kmb_formats_v); |
| } else { |
| plane_formats = kmb_formats_g; |
| num_plane_formats = ARRAY_SIZE(kmb_formats_g); |
| } |
| |
| ret = drm_universal_plane_init(drm, &plane->base_plane, |
| POSSIBLE_CRTCS, &kmb_plane_funcs, |
| plane_formats, num_plane_formats, |
| NULL, plane_type, "plane %d", i); |
| if (ret < 0) { |
| drm_err(drm, "drm_universal_plane_init failed (ret=%d)", |
| ret); |
| goto cleanup; |
| } |
| drm_dbg(drm, "%s : %d i=%d type=%d", |
| __func__, __LINE__, |
| i, plane_type); |
| drm_plane_create_alpha_property(&plane->base_plane); |
| |
| drm_plane_create_blend_mode_property(&plane->base_plane, |
| blend_caps); |
| |
| drm_plane_create_zpos_immutable_property(&plane->base_plane, i); |
| |
| drm_plane_helper_add(&plane->base_plane, |
| &kmb_plane_helper_funcs); |
| |
| if (plane_type == DRM_PLANE_TYPE_PRIMARY) { |
| primary = plane; |
| kmb->plane = plane; |
| } |
| drm_dbg(drm, "%s : %d primary=%p\n", __func__, __LINE__, |
| &primary->base_plane); |
| plane->id = i; |
| } |
| |
| /* Disable pipeline AXI read transactions for the DMA |
| * prior to setting graphics layers |
| */ |
| kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA); |
| |
| return primary; |
| cleanup: |
| drmm_kfree(drm, plane); |
| return ERR_PTR(ret); |
| } |