| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 exceet electronics GmbH |
| * Copyright (C) 2018 Kontron Electronics GmbH |
| * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> |
| */ |
| |
| #include "imx6ul.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Kontron N6310 SOM"; |
| compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul"; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x10000000>; |
| device_type = "memory"; |
| }; |
| }; |
| |
| &ecspi2 { |
| cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| status = "okay"; |
| |
| spi-flash@0 { |
| compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy1>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@1 { |
| reg = <1>; |
| micrel,led-mode = <0>; |
| clocks = <&clks IMX6UL_CLK_ENET_REF>; |
| clock-names = "rmii-ref"; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| phy-mode = "rmii"; |
| status = "disabled"; |
| }; |
| |
| &qspi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi>; |
| status = "okay"; |
| |
| spi-flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spi-nand"; |
| spi-max-frequency = <108000000>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| reg = <0>; |
| |
| partition@0 { |
| label = "ubi1"; |
| reg = <0x00000000 0x08000000>; |
| }; |
| |
| partition@8000000 { |
| label = "ubi2"; |
| reg = <0x08000000 0x08000000>; |
| }; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reset_out>; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 |
| MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 |
| MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 |
| MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 |
| >; |
| }; |
| |
| pinctrl_enet1_mdio: enet1mdiogrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 |
| MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_qspi: qspigrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 |
| MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 |
| MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 |
| MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 |
| MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 |
| MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 |
| >; |
| }; |
| |
| pinctrl_reset_out: rstoutgrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 |
| >; |
| }; |
| }; |