| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * ideapad-laptop.c - Lenovo IdeaPad ACPI Extras |
| * |
| * Copyright © 2010 Intel Corporation |
| * Copyright © 2010 David Woodhouse <dwmw2@infradead.org> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/backlight.h> |
| #include <linux/bitops.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/dmi.h> |
| #include <linux/fb.h> |
| #include <linux/i8042.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/input/sparse-keymap.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_profile.h> |
| #include <linux/rfkill.h> |
| #include <linux/seq_file.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| |
| #include <acpi/video.h> |
| |
| #define IDEAPAD_RFKILL_DEV_NUM (3) |
| |
| #define BM_CONSERVATION_BIT (5) |
| #define HA_FNLOCK_BIT (10) |
| |
| #define CFG_BT_BIT (16) |
| #define CFG_3G_BIT (17) |
| #define CFG_WIFI_BIT (18) |
| #define CFG_CAMERA_BIT (19) |
| |
| #if IS_ENABLED(CONFIG_ACPI_WMI) |
| static const char *const ideapad_wmi_fnesc_events[] = { |
| "26CAB2E5-5CF1-46AE-AAC3-4A12B6BA50E6", /* Yoga 3 */ |
| "56322276-8493-4CE8-A783-98C991274F5E", /* Yoga 700 */ |
| }; |
| #endif |
| |
| enum { |
| BMCMD_CONSERVATION_ON = 3, |
| BMCMD_CONSERVATION_OFF = 5, |
| HACMD_FNLOCK_ON = 0xe, |
| HACMD_FNLOCK_OFF = 0xf, |
| }; |
| |
| enum { |
| VPCCMD_R_VPC1 = 0x10, |
| VPCCMD_R_BL_MAX, |
| VPCCMD_R_BL, |
| VPCCMD_W_BL, |
| VPCCMD_R_WIFI, |
| VPCCMD_W_WIFI, |
| VPCCMD_R_BT, |
| VPCCMD_W_BT, |
| VPCCMD_R_BL_POWER, |
| VPCCMD_R_NOVO, |
| VPCCMD_R_VPC2, |
| VPCCMD_R_TOUCHPAD, |
| VPCCMD_W_TOUCHPAD, |
| VPCCMD_R_CAMERA, |
| VPCCMD_W_CAMERA, |
| VPCCMD_R_3G, |
| VPCCMD_W_3G, |
| VPCCMD_R_ODD, /* 0x21 */ |
| VPCCMD_W_FAN, |
| VPCCMD_R_RF, |
| VPCCMD_W_RF, |
| VPCCMD_R_FAN = 0x2B, |
| VPCCMD_R_SPECIAL_BUTTONS = 0x31, |
| VPCCMD_W_BL_POWER = 0x33, |
| }; |
| |
| struct ideapad_dytc_priv { |
| enum platform_profile_option current_profile; |
| struct platform_profile_handler pprof; |
| struct mutex mutex; |
| struct ideapad_private *priv; |
| }; |
| |
| struct ideapad_rfk_priv { |
| int dev; |
| struct ideapad_private *priv; |
| }; |
| |
| struct ideapad_private { |
| struct acpi_device *adev; |
| struct rfkill *rfk[IDEAPAD_RFKILL_DEV_NUM]; |
| struct ideapad_rfk_priv rfk_priv[IDEAPAD_RFKILL_DEV_NUM]; |
| struct platform_device *platform_device; |
| struct input_dev *inputdev; |
| struct backlight_device *blightdev; |
| struct ideapad_dytc_priv *dytc; |
| struct dentry *debug; |
| unsigned long cfg; |
| bool has_hw_rfkill_switch; |
| bool has_touchpad_switch; |
| const char *fnesc_guid; |
| }; |
| |
| static bool no_bt_rfkill; |
| module_param(no_bt_rfkill, bool, 0444); |
| MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth."); |
| |
| /* |
| * ACPI Helpers |
| */ |
| #define IDEAPAD_EC_TIMEOUT (200) /* in ms */ |
| |
| static int read_method_int(acpi_handle handle, const char *method, int *val) |
| { |
| acpi_status status; |
| unsigned long long result; |
| |
| status = acpi_evaluate_integer(handle, (char *)method, NULL, &result); |
| if (ACPI_FAILURE(status)) { |
| *val = -1; |
| return -1; |
| } |
| *val = result; |
| return 0; |
| |
| } |
| |
| static int method_gbmd(acpi_handle handle, unsigned long *ret) |
| { |
| int result, val; |
| |
| result = read_method_int(handle, "GBMD", &val); |
| *ret = val; |
| return result; |
| } |
| |
| static int method_int1(acpi_handle handle, char *method, int cmd) |
| { |
| acpi_status status; |
| |
| status = acpi_execute_simple_method(handle, method, cmd); |
| return ACPI_FAILURE(status) ? -1 : 0; |
| } |
| |
| static int method_dytc(acpi_handle handle, int cmd, int *ret) |
| { |
| acpi_status status; |
| unsigned long long result; |
| struct acpi_object_list params; |
| union acpi_object in_obj; |
| |
| params.count = 1; |
| params.pointer = &in_obj; |
| in_obj.type = ACPI_TYPE_INTEGER; |
| in_obj.integer.value = cmd; |
| |
| status = acpi_evaluate_integer(handle, "DYTC", ¶ms, &result); |
| |
| if (ACPI_FAILURE(status)) { |
| *ret = -1; |
| return -1; |
| } |
| *ret = result; |
| return 0; |
| } |
| |
| static int method_vpcr(acpi_handle handle, int cmd, int *ret) |
| { |
| acpi_status status; |
| unsigned long long result; |
| struct acpi_object_list params; |
| union acpi_object in_obj; |
| |
| params.count = 1; |
| params.pointer = &in_obj; |
| in_obj.type = ACPI_TYPE_INTEGER; |
| in_obj.integer.value = cmd; |
| |
| status = acpi_evaluate_integer(handle, "VPCR", ¶ms, &result); |
| |
| if (ACPI_FAILURE(status)) { |
| *ret = -1; |
| return -1; |
| } |
| *ret = result; |
| return 0; |
| |
| } |
| |
| static int method_vpcw(acpi_handle handle, int cmd, int data) |
| { |
| struct acpi_object_list params; |
| union acpi_object in_obj[2]; |
| acpi_status status; |
| |
| params.count = 2; |
| params.pointer = in_obj; |
| in_obj[0].type = ACPI_TYPE_INTEGER; |
| in_obj[0].integer.value = cmd; |
| in_obj[1].type = ACPI_TYPE_INTEGER; |
| in_obj[1].integer.value = data; |
| |
| status = acpi_evaluate_object(handle, "VPCW", ¶ms, NULL); |
| if (status != AE_OK) |
| return -1; |
| return 0; |
| } |
| |
| static int read_ec_data(acpi_handle handle, int cmd, unsigned long *data) |
| { |
| int val; |
| unsigned long int end_jiffies; |
| |
| if (method_vpcw(handle, 1, cmd)) |
| return -1; |
| |
| end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; |
| |
| while (time_before(jiffies, end_jiffies)) { |
| schedule(); |
| if (method_vpcr(handle, 1, &val)) |
| return -1; |
| if (val == 0) { |
| if (method_vpcr(handle, 0, &val)) |
| return -1; |
| *data = val; |
| return 0; |
| } |
| } |
| acpi_handle_err(handle, "timeout in %s\n", __func__); |
| return -1; |
| } |
| |
| static int write_ec_cmd(acpi_handle handle, int cmd, unsigned long data) |
| { |
| int val; |
| unsigned long int end_jiffies; |
| |
| if (method_vpcw(handle, 0, data)) |
| return -1; |
| if (method_vpcw(handle, 1, cmd)) |
| return -1; |
| |
| end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; |
| |
| while (time_before(jiffies, end_jiffies)) { |
| schedule(); |
| if (method_vpcr(handle, 1, &val)) |
| return -1; |
| if (val == 0) |
| return 0; |
| } |
| acpi_handle_err(handle, "timeout in %s\n", __func__); |
| return -1; |
| } |
| |
| /* |
| * debugfs |
| */ |
| static int debugfs_status_show(struct seq_file *s, void *data) |
| { |
| struct ideapad_private *priv = s->private; |
| unsigned long value; |
| |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &value)) |
| seq_printf(s, "Backlight max:\t%lu\n", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL, &value)) |
| seq_printf(s, "Backlight now:\t%lu\n", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &value)) |
| seq_printf(s, "BL power value:\t%s\n", value ? "On" : "Off"); |
| seq_printf(s, "=====================\n"); |
| |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_RF, &value)) |
| seq_printf(s, "Radio status:\t%s(%lu)\n", |
| value ? "On" : "Off", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_WIFI, &value)) |
| seq_printf(s, "Wifi status:\t%s(%lu)\n", |
| value ? "On" : "Off", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_BT, &value)) |
| seq_printf(s, "BT status:\t%s(%lu)\n", |
| value ? "On" : "Off", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_3G, &value)) |
| seq_printf(s, "3G status:\t%s(%lu)\n", |
| value ? "On" : "Off", value); |
| seq_printf(s, "=====================\n"); |
| |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) |
| seq_printf(s, "Touchpad status:%s(%lu)\n", |
| value ? "On" : "Off", value); |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &value)) |
| seq_printf(s, "Camera status:\t%s(%lu)\n", |
| value ? "On" : "Off", value); |
| seq_puts(s, "=====================\n"); |
| |
| if (!method_gbmd(priv->adev->handle, &value)) { |
| seq_printf(s, "Conservation mode:\t%s(%lu)\n", |
| test_bit(BM_CONSERVATION_BIT, &value) ? "On" : "Off", |
| value); |
| } |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(debugfs_status); |
| |
| static int debugfs_cfg_show(struct seq_file *s, void *data) |
| { |
| struct ideapad_private *priv = s->private; |
| |
| seq_printf(s, "cfg: 0x%.8lX\n\nCapability: ", |
| priv->cfg); |
| if (test_bit(CFG_BT_BIT, &priv->cfg)) |
| seq_printf(s, "Bluetooth "); |
| if (test_bit(CFG_3G_BIT, &priv->cfg)) |
| seq_printf(s, "3G "); |
| if (test_bit(CFG_WIFI_BIT, &priv->cfg)) |
| seq_printf(s, "Wireless "); |
| if (test_bit(CFG_CAMERA_BIT, &priv->cfg)) |
| seq_printf(s, "Camera "); |
| seq_printf(s, "\nGraphic: "); |
| switch ((priv->cfg)&0x700) { |
| case 0x100: |
| seq_printf(s, "Intel"); |
| break; |
| case 0x200: |
| seq_printf(s, "ATI"); |
| break; |
| case 0x300: |
| seq_printf(s, "Nvidia"); |
| break; |
| case 0x400: |
| seq_printf(s, "Intel and ATI"); |
| break; |
| case 0x500: |
| seq_printf(s, "Intel and Nvidia"); |
| break; |
| } |
| seq_printf(s, "\n"); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(debugfs_cfg); |
| |
| static void ideapad_debugfs_init(struct ideapad_private *priv) |
| { |
| struct dentry *dir; |
| |
| dir = debugfs_create_dir("ideapad", NULL); |
| priv->debug = dir; |
| |
| debugfs_create_file("cfg", S_IRUGO, dir, priv, &debugfs_cfg_fops); |
| debugfs_create_file("status", S_IRUGO, dir, priv, &debugfs_status_fops); |
| } |
| |
| static void ideapad_debugfs_exit(struct ideapad_private *priv) |
| { |
| debugfs_remove_recursive(priv->debug); |
| priv->debug = NULL; |
| } |
| |
| /* |
| * sysfs |
| */ |
| static ssize_t show_ideapad_cam(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long result; |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &result)) |
| return sysfs_emit(buf, "-1\n"); |
| return sysfs_emit(buf, "%lu\n", result); |
| } |
| |
| static ssize_t store_ideapad_cam(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret, state; |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| |
| if (!count) |
| return 0; |
| if (sscanf(buf, "%i", &state) != 1) |
| return -EINVAL; |
| ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state); |
| if (ret < 0) |
| return -EIO; |
| return count; |
| } |
| |
| static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam); |
| |
| static ssize_t show_ideapad_fan(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long result; |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_FAN, &result)) |
| return sysfs_emit(buf, "-1\n"); |
| return sysfs_emit(buf, "%lu\n", result); |
| } |
| |
| static ssize_t store_ideapad_fan(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret, state; |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| |
| if (!count) |
| return 0; |
| if (sscanf(buf, "%i", &state) != 1) |
| return -EINVAL; |
| if (state < 0 || state > 4 || state == 3) |
| return -EINVAL; |
| ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_FAN, state); |
| if (ret < 0) |
| return -EIO; |
| return count; |
| } |
| |
| static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan); |
| |
| static ssize_t touchpad_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| unsigned long result; |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &result)) |
| return sysfs_emit(buf, "-1\n"); |
| return sysfs_emit(buf, "%lu\n", result); |
| } |
| |
| /* Switch to RO for now: It might be revisited in the future */ |
| static ssize_t __maybe_unused touchpad_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| bool state; |
| int ret; |
| |
| ret = kstrtobool(buf, &state); |
| if (ret) |
| return ret; |
| |
| ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, state); |
| if (ret < 0) |
| return -EIO; |
| return count; |
| } |
| |
| static DEVICE_ATTR_RO(touchpad); |
| |
| static ssize_t conservation_mode_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| unsigned long result; |
| |
| if (method_gbmd(priv->adev->handle, &result)) |
| return sysfs_emit(buf, "-1\n"); |
| return sysfs_emit(buf, "%u\n", test_bit(BM_CONSERVATION_BIT, &result)); |
| } |
| |
| static ssize_t conservation_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| bool state; |
| int ret; |
| |
| ret = kstrtobool(buf, &state); |
| if (ret) |
| return ret; |
| |
| ret = method_int1(priv->adev->handle, "SBMC", state ? |
| BMCMD_CONSERVATION_ON : |
| BMCMD_CONSERVATION_OFF); |
| if (ret < 0) |
| return -EIO; |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(conservation_mode); |
| |
| static ssize_t fn_lock_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| unsigned long result; |
| int hals; |
| int fail = read_method_int(priv->adev->handle, "HALS", &hals); |
| |
| if (fail) |
| return sysfs_emit(buf, "-1\n"); |
| |
| result = hals; |
| return sysfs_emit(buf, "%u\n", test_bit(HA_FNLOCK_BIT, &result)); |
| } |
| |
| static ssize_t fn_lock_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| bool state; |
| int ret; |
| |
| ret = kstrtobool(buf, &state); |
| if (ret) |
| return ret; |
| |
| ret = method_int1(priv->adev->handle, "SALS", state ? |
| HACMD_FNLOCK_ON : |
| HACMD_FNLOCK_OFF); |
| if (ret < 0) |
| return -EIO; |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(fn_lock); |
| |
| |
| static struct attribute *ideapad_attributes[] = { |
| &dev_attr_camera_power.attr, |
| &dev_attr_fan_mode.attr, |
| &dev_attr_touchpad.attr, |
| &dev_attr_conservation_mode.attr, |
| &dev_attr_fn_lock.attr, |
| NULL |
| }; |
| |
| static umode_t ideapad_is_visible(struct kobject *kobj, |
| struct attribute *attr, |
| int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| bool supported; |
| |
| if (attr == &dev_attr_camera_power.attr) |
| supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg)); |
| else if (attr == &dev_attr_fan_mode.attr) { |
| unsigned long value; |
| supported = !read_ec_data(priv->adev->handle, VPCCMD_R_FAN, |
| &value); |
| } else if (attr == &dev_attr_conservation_mode.attr) { |
| supported = acpi_has_method(priv->adev->handle, "GBMD") && |
| acpi_has_method(priv->adev->handle, "SBMC"); |
| } else if (attr == &dev_attr_fn_lock.attr) { |
| supported = acpi_has_method(priv->adev->handle, "HALS") && |
| acpi_has_method(priv->adev->handle, "SALS"); |
| } else if (attr == &dev_attr_touchpad.attr) |
| supported = priv->has_touchpad_switch; |
| else |
| supported = true; |
| |
| return supported ? attr->mode : 0; |
| } |
| |
| static const struct attribute_group ideapad_attribute_group = { |
| .is_visible = ideapad_is_visible, |
| .attrs = ideapad_attributes |
| }; |
| |
| /* |
| * DYTC Platform profile |
| */ |
| #define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ |
| #define DYTC_CMD_SET 1 /* To enable/disable IC function mode */ |
| #define DYTC_CMD_GET 2 /* To get current IC function and mode */ |
| #define DYTC_CMD_RESET 0x1ff /* To reset back to default */ |
| |
| #define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ |
| #define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ |
| #define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ |
| |
| #define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */ |
| #define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */ |
| |
| #define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */ |
| #define DYTC_SET_MODE_BIT 16 /* Bits 16-19 - mode setting */ |
| #define DYTC_SET_VALID_BIT 20 /* Bit 20 - 1 = on, 0 = off */ |
| |
| #define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */ |
| #define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */ |
| #define DYTC_FUNCTION_MMC 11 /* Function = 11, desk mode */ |
| |
| #define DYTC_MODE_PERFORM 2 /* High power mode aka performance */ |
| #define DYTC_MODE_LOW_POWER 3 /* Low power mode aka quiet */ |
| #define DYTC_MODE_BALANCE 0xF /* Default mode aka balanced */ |
| |
| #define DYTC_SET_COMMAND(function, mode, on) \ |
| (DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \ |
| (mode) << DYTC_SET_MODE_BIT | \ |
| (on) << DYTC_SET_VALID_BIT) |
| |
| #define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0) |
| |
| #define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1) |
| |
| static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile) |
| { |
| switch (dytcmode) { |
| case DYTC_MODE_LOW_POWER: |
| *profile = PLATFORM_PROFILE_LOW_POWER; |
| break; |
| case DYTC_MODE_BALANCE: |
| *profile = PLATFORM_PROFILE_BALANCED; |
| break; |
| case DYTC_MODE_PERFORM: |
| *profile = PLATFORM_PROFILE_PERFORMANCE; |
| break; |
| default: /* Unknown mode */ |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode) |
| { |
| switch (profile) { |
| case PLATFORM_PROFILE_LOW_POWER: |
| *perfmode = DYTC_MODE_LOW_POWER; |
| break; |
| case PLATFORM_PROFILE_BALANCED: |
| *perfmode = DYTC_MODE_BALANCE; |
| break; |
| case PLATFORM_PROFILE_PERFORMANCE: |
| *perfmode = DYTC_MODE_PERFORM; |
| break; |
| default: /* Unknown profile */ |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| /* |
| * dytc_profile_get: Function to register with platform_profile |
| * handler. Returns current platform profile. |
| */ |
| int dytc_profile_get(struct platform_profile_handler *pprof, |
| enum platform_profile_option *profile) |
| { |
| struct ideapad_dytc_priv *dytc; |
| |
| dytc = container_of(pprof, struct ideapad_dytc_priv, pprof); |
| *profile = dytc->current_profile; |
| return 0; |
| } |
| |
| /* |
| * Helper function - check if we are in CQL mode and if we are |
| * - disable CQL, |
| * - run the command |
| * - enable CQL |
| * If not in CQL mode, just run the command |
| */ |
| int dytc_cql_command(struct ideapad_private *priv, int command, int *output) |
| { |
| int err, cmd_err, dummy; |
| int cur_funcmode; |
| |
| /* Determine if we are in CQL mode. This alters the commands we do */ |
| err = method_dytc(priv->adev->handle, DYTC_CMD_GET, output); |
| if (err) |
| return err; |
| |
| cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF; |
| /* Check if we're OK to return immediately */ |
| if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL)) |
| return 0; |
| |
| if (cur_funcmode == DYTC_FUNCTION_CQL) { |
| err = method_dytc(priv->adev->handle, DYTC_DISABLE_CQL, &dummy); |
| if (err) |
| return err; |
| } |
| |
| cmd_err = method_dytc(priv->adev->handle, command, output); |
| /* Check return condition after we've restored CQL state */ |
| |
| if (cur_funcmode == DYTC_FUNCTION_CQL) { |
| err = method_dytc(priv->adev->handle, DYTC_ENABLE_CQL, &dummy); |
| if (err) |
| return err; |
| } |
| |
| return cmd_err; |
| } |
| |
| /* |
| * dytc_profile_set: Function to register with platform_profile |
| * handler. Sets current platform profile. |
| */ |
| int dytc_profile_set(struct platform_profile_handler *pprof, |
| enum platform_profile_option profile) |
| { |
| struct ideapad_dytc_priv *dytc; |
| struct ideapad_private *priv; |
| int output; |
| int err; |
| |
| dytc = container_of(pprof, struct ideapad_dytc_priv, pprof); |
| priv = dytc->priv; |
| |
| err = mutex_lock_interruptible(&dytc->mutex); |
| if (err) |
| return err; |
| |
| if (profile == PLATFORM_PROFILE_BALANCED) { |
| /* To get back to balanced mode we just issue a reset command */ |
| err = method_dytc(priv->adev->handle, DYTC_CMD_RESET, &output); |
| if (err) |
| goto unlock; |
| } else { |
| int perfmode; |
| |
| err = convert_profile_to_dytc(profile, &perfmode); |
| if (err) |
| goto unlock; |
| |
| /* Determine if we are in CQL mode. This alters the commands we do */ |
| err = dytc_cql_command(priv, |
| DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), |
| &output); |
| if (err) |
| goto unlock; |
| } |
| /* Success - update current profile */ |
| dytc->current_profile = profile; |
| unlock: |
| mutex_unlock(&dytc->mutex); |
| return err; |
| } |
| |
| static void dytc_profile_refresh(struct ideapad_private *priv) |
| { |
| enum platform_profile_option profile; |
| int output, err; |
| int perfmode; |
| |
| mutex_lock(&priv->dytc->mutex); |
| err = dytc_cql_command(priv, DYTC_CMD_GET, &output); |
| mutex_unlock(&priv->dytc->mutex); |
| if (err) |
| return; |
| |
| perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF; |
| convert_dytc_to_profile(perfmode, &profile); |
| if (profile != priv->dytc->current_profile) { |
| priv->dytc->current_profile = profile; |
| platform_profile_notify(); |
| } |
| } |
| |
| static int ideapad_dytc_profile_init(struct ideapad_private *priv) |
| { |
| int err, output, dytc_version; |
| |
| err = method_dytc(priv->adev->handle, DYTC_CMD_QUERY, &output); |
| /* For all other errors we can flag the failure */ |
| if (err) |
| return err; |
| |
| /* Check DYTC is enabled and supports mode setting */ |
| if (!(output & BIT(DYTC_QUERY_ENABLE_BIT))) |
| return -ENODEV; |
| |
| dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; |
| if (dytc_version < 5) |
| return -ENODEV; |
| |
| priv->dytc = kzalloc(sizeof(struct ideapad_dytc_priv), GFP_KERNEL); |
| if (!priv->dytc) |
| return -ENOMEM; |
| |
| mutex_init(&priv->dytc->mutex); |
| |
| priv->dytc->priv = priv; |
| priv->dytc->pprof.profile_get = dytc_profile_get; |
| priv->dytc->pprof.profile_set = dytc_profile_set; |
| |
| /* Setup supported modes */ |
| set_bit(PLATFORM_PROFILE_LOW_POWER, priv->dytc->pprof.choices); |
| set_bit(PLATFORM_PROFILE_BALANCED, priv->dytc->pprof.choices); |
| set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->dytc->pprof.choices); |
| |
| /* Create platform_profile structure and register */ |
| err = platform_profile_register(&priv->dytc->pprof); |
| if (err) |
| goto mutex_destroy; |
| |
| /* Ensure initial values are correct */ |
| dytc_profile_refresh(priv); |
| |
| return 0; |
| |
| mutex_destroy: |
| mutex_destroy(&priv->dytc->mutex); |
| kfree(priv->dytc); |
| priv->dytc = NULL; |
| return err; |
| } |
| |
| static void ideapad_dytc_profile_exit(struct ideapad_private *priv) |
| { |
| if (!priv->dytc) |
| return; |
| |
| platform_profile_remove(); |
| mutex_destroy(&priv->dytc->mutex); |
| kfree(priv->dytc); |
| priv->dytc = NULL; |
| } |
| |
| /* |
| * Rfkill |
| */ |
| struct ideapad_rfk_data { |
| char *name; |
| int cfgbit; |
| int opcode; |
| int type; |
| }; |
| |
| static const struct ideapad_rfk_data ideapad_rfk_data[] = { |
| { "ideapad_wlan", CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN }, |
| { "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH }, |
| { "ideapad_3g", CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN }, |
| }; |
| |
| static int ideapad_rfk_set(void *data, bool blocked) |
| { |
| struct ideapad_rfk_priv *priv = data; |
| int opcode = ideapad_rfk_data[priv->dev].opcode; |
| |
| return write_ec_cmd(priv->priv->adev->handle, opcode, !blocked); |
| } |
| |
| static const struct rfkill_ops ideapad_rfk_ops = { |
| .set_block = ideapad_rfk_set, |
| }; |
| |
| static void ideapad_sync_rfk_state(struct ideapad_private *priv) |
| { |
| unsigned long hw_blocked = 0; |
| int i; |
| |
| if (priv->has_hw_rfkill_switch) { |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked)) |
| return; |
| hw_blocked = !hw_blocked; |
| } |
| |
| for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) |
| if (priv->rfk[i]) |
| rfkill_set_hw_state(priv->rfk[i], hw_blocked); |
| } |
| |
| static int ideapad_register_rfkill(struct ideapad_private *priv, int dev) |
| { |
| int ret; |
| unsigned long sw_blocked; |
| |
| if (no_bt_rfkill && |
| (ideapad_rfk_data[dev].type == RFKILL_TYPE_BLUETOOTH)) { |
| /* Force to enable bluetooth when no_bt_rfkill=1 */ |
| write_ec_cmd(priv->adev->handle, |
| ideapad_rfk_data[dev].opcode, 1); |
| return 0; |
| } |
| priv->rfk_priv[dev].dev = dev; |
| priv->rfk_priv[dev].priv = priv; |
| |
| priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev].name, |
| &priv->platform_device->dev, |
| ideapad_rfk_data[dev].type, |
| &ideapad_rfk_ops, |
| &priv->rfk_priv[dev]); |
| if (!priv->rfk[dev]) |
| return -ENOMEM; |
| |
| if (read_ec_data(priv->adev->handle, ideapad_rfk_data[dev].opcode-1, |
| &sw_blocked)) { |
| rfkill_init_sw_state(priv->rfk[dev], 0); |
| } else { |
| sw_blocked = !sw_blocked; |
| rfkill_init_sw_state(priv->rfk[dev], sw_blocked); |
| } |
| |
| ret = rfkill_register(priv->rfk[dev]); |
| if (ret) { |
| rfkill_destroy(priv->rfk[dev]); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void ideapad_unregister_rfkill(struct ideapad_private *priv, int dev) |
| { |
| if (!priv->rfk[dev]) |
| return; |
| |
| rfkill_unregister(priv->rfk[dev]); |
| rfkill_destroy(priv->rfk[dev]); |
| } |
| |
| /* |
| * Platform device |
| */ |
| static int ideapad_sysfs_init(struct ideapad_private *priv) |
| { |
| return device_add_group(&priv->platform_device->dev, |
| &ideapad_attribute_group); |
| } |
| |
| static void ideapad_sysfs_exit(struct ideapad_private *priv) |
| { |
| device_remove_group(&priv->platform_device->dev, |
| &ideapad_attribute_group); |
| } |
| |
| /* |
| * input device |
| */ |
| static const struct key_entry ideapad_keymap[] = { |
| { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, |
| { KE_KEY, 7, { KEY_CAMERA } }, |
| { KE_KEY, 8, { KEY_MICMUTE } }, |
| { KE_KEY, 11, { KEY_F16 } }, |
| { KE_KEY, 13, { KEY_WLAN } }, |
| { KE_KEY, 16, { KEY_PROG1 } }, |
| { KE_KEY, 17, { KEY_PROG2 } }, |
| { KE_KEY, 64, { KEY_PROG3 } }, |
| { KE_KEY, 65, { KEY_PROG4 } }, |
| { KE_KEY, 66, { KEY_TOUCHPAD_OFF } }, |
| { KE_KEY, 67, { KEY_TOUCHPAD_ON } }, |
| { KE_KEY, 128, { KEY_ESC } }, |
| |
| { KE_END, 0 }, |
| }; |
| |
| static int ideapad_input_init(struct ideapad_private *priv) |
| { |
| struct input_dev *inputdev; |
| int error; |
| |
| inputdev = input_allocate_device(); |
| if (!inputdev) |
| return -ENOMEM; |
| |
| inputdev->name = "Ideapad extra buttons"; |
| inputdev->phys = "ideapad/input0"; |
| inputdev->id.bustype = BUS_HOST; |
| inputdev->dev.parent = &priv->platform_device->dev; |
| |
| error = sparse_keymap_setup(inputdev, ideapad_keymap, NULL); |
| if (error) { |
| dev_err(&priv->platform_device->dev, |
| "Unable to setup input device keymap\n"); |
| goto err_free_dev; |
| } |
| |
| error = input_register_device(inputdev); |
| if (error) { |
| dev_err(&priv->platform_device->dev, |
| "Unable to register input device\n"); |
| goto err_free_dev; |
| } |
| |
| priv->inputdev = inputdev; |
| return 0; |
| |
| err_free_dev: |
| input_free_device(inputdev); |
| return error; |
| } |
| |
| static void ideapad_input_exit(struct ideapad_private *priv) |
| { |
| input_unregister_device(priv->inputdev); |
| priv->inputdev = NULL; |
| } |
| |
| static void ideapad_input_report(struct ideapad_private *priv, |
| unsigned long scancode) |
| { |
| sparse_keymap_report_event(priv->inputdev, scancode, 1, true); |
| } |
| |
| static void ideapad_input_novokey(struct ideapad_private *priv) |
| { |
| unsigned long long_pressed; |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_NOVO, &long_pressed)) |
| return; |
| if (long_pressed) |
| ideapad_input_report(priv, 17); |
| else |
| ideapad_input_report(priv, 16); |
| } |
| |
| static void ideapad_check_special_buttons(struct ideapad_private *priv) |
| { |
| unsigned long bit, value; |
| |
| read_ec_data(priv->adev->handle, VPCCMD_R_SPECIAL_BUTTONS, &value); |
| |
| for_each_set_bit (bit, &value, 16) { |
| switch (bit) { |
| case 0: /* Z580 */ |
| case 6: /* Z570 */ |
| /* Thermal Management button */ |
| ideapad_input_report(priv, 65); |
| break; |
| case 1: |
| /* OneKey Theater button */ |
| ideapad_input_report(priv, 64); |
| break; |
| default: |
| dev_info(&priv->platform_device->dev, |
| "Unknown special button: %lu\n", bit); |
| break; |
| } |
| } |
| } |
| |
| /* |
| * backlight |
| */ |
| static int ideapad_backlight_get_brightness(struct backlight_device *blightdev) |
| { |
| struct ideapad_private *priv = bl_get_data(blightdev); |
| unsigned long now; |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now)) |
| return -EIO; |
| return now; |
| } |
| |
| static int ideapad_backlight_update_status(struct backlight_device *blightdev) |
| { |
| struct ideapad_private *priv = bl_get_data(blightdev); |
| |
| if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL, |
| blightdev->props.brightness)) |
| return -EIO; |
| if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL_POWER, |
| blightdev->props.power == FB_BLANK_POWERDOWN ? 0 : 1)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops ideapad_backlight_ops = { |
| .get_brightness = ideapad_backlight_get_brightness, |
| .update_status = ideapad_backlight_update_status, |
| }; |
| |
| static int ideapad_backlight_init(struct ideapad_private *priv) |
| { |
| struct backlight_device *blightdev; |
| struct backlight_properties props; |
| unsigned long max, now, power; |
| |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &max)) |
| return -EIO; |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now)) |
| return -EIO; |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power)) |
| return -EIO; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = max; |
| props.type = BACKLIGHT_PLATFORM; |
| blightdev = backlight_device_register("ideapad", |
| &priv->platform_device->dev, |
| priv, |
| &ideapad_backlight_ops, |
| &props); |
| if (IS_ERR(blightdev)) { |
| dev_err(&priv->platform_device->dev, |
| "Could not register backlight device\n"); |
| return PTR_ERR(blightdev); |
| } |
| |
| priv->blightdev = blightdev; |
| blightdev->props.brightness = now; |
| blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; |
| backlight_update_status(blightdev); |
| |
| return 0; |
| } |
| |
| static void ideapad_backlight_exit(struct ideapad_private *priv) |
| { |
| backlight_device_unregister(priv->blightdev); |
| priv->blightdev = NULL; |
| } |
| |
| static void ideapad_backlight_notify_power(struct ideapad_private *priv) |
| { |
| unsigned long power; |
| struct backlight_device *blightdev = priv->blightdev; |
| |
| if (!blightdev) |
| return; |
| if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power)) |
| return; |
| blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; |
| } |
| |
| static void ideapad_backlight_notify_brightness(struct ideapad_private *priv) |
| { |
| unsigned long now; |
| |
| /* if we control brightness via acpi video driver */ |
| if (priv->blightdev == NULL) { |
| read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now); |
| return; |
| } |
| |
| backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY); |
| } |
| |
| /* |
| * module init/exit |
| */ |
| static void ideapad_sync_touchpad_state(struct ideapad_private *priv) |
| { |
| unsigned long value; |
| |
| if (!priv->has_touchpad_switch) |
| return; |
| |
| /* Without reading from EC touchpad LED doesn't switch state */ |
| if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) { |
| /* Some IdeaPads don't really turn off touchpad - they only |
| * switch the LED state. We (de)activate KBC AUX port to turn |
| * touchpad off and on. We send KEY_TOUCHPAD_OFF and |
| * KEY_TOUCHPAD_ON to not to get out of sync with LED */ |
| unsigned char param; |
| i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : |
| I8042_CMD_AUX_DISABLE); |
| ideapad_input_report(priv, value ? 67 : 66); |
| } |
| } |
| |
| static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) |
| { |
| struct ideapad_private *priv = data; |
| unsigned long vpc1, vpc2, bit; |
| |
| if (read_ec_data(handle, VPCCMD_R_VPC1, &vpc1)) |
| return; |
| if (read_ec_data(handle, VPCCMD_R_VPC2, &vpc2)) |
| return; |
| |
| vpc1 = (vpc2 << 8) | vpc1; |
| |
| for_each_set_bit (bit, &vpc1, 16) { |
| switch (bit) { |
| case 9: |
| ideapad_sync_rfk_state(priv); |
| break; |
| case 13: |
| case 11: |
| case 8: |
| case 7: |
| case 6: |
| ideapad_input_report(priv, bit); |
| break; |
| case 5: |
| ideapad_sync_touchpad_state(priv); |
| break; |
| case 4: |
| ideapad_backlight_notify_brightness(priv); |
| break; |
| case 3: |
| ideapad_input_novokey(priv); |
| break; |
| case 2: |
| ideapad_backlight_notify_power(priv); |
| break; |
| case 0: |
| ideapad_check_special_buttons(priv); |
| break; |
| case 1: |
| /* Some IdeaPads report event 1 every ~20 |
| * seconds while on battery power; some |
| * report this when changing to/from tablet |
| * mode. Squelch this event. |
| */ |
| break; |
| default: |
| dev_info(&priv->platform_device->dev, |
| "Unknown event: %lu\n", bit); |
| } |
| } |
| } |
| |
| #if IS_ENABLED(CONFIG_ACPI_WMI) |
| static void ideapad_wmi_notify(u32 value, void *context) |
| { |
| struct ideapad_private *priv = context; |
| |
| switch (value) { |
| case 128: |
| ideapad_input_report(priv, value); |
| break; |
| default: |
| dev_info(&priv->platform_device->dev, |
| "Unknown WMI event: %u\n", value); |
| } |
| } |
| #endif |
| |
| /* |
| * Some ideapads have a hardware rfkill switch, but most do not have one. |
| * Reading VPCCMD_R_RF always results in 0 on models without a hardware rfkill, |
| * switch causing ideapad_laptop to wrongly report all radios as hw-blocked. |
| * There used to be a long list of DMI ids for models without a hw rfkill |
| * switch here, but that resulted in playing whack a mole. |
| * More importantly wrongly reporting the wifi radio as hw-blocked, results in |
| * non working wifi. Whereas not reporting it hw-blocked, when it actually is |
| * hw-blocked results in an empty SSID list, which is a much more benign |
| * failure mode. |
| * So the default now is the much safer option of assuming there is no |
| * hardware rfkill switch. This default also actually matches most hardware, |
| * since having a hw rfkill switch is quite rare on modern hardware, so this |
| * also leads to a much shorter list. |
| */ |
| static const struct dmi_system_id hw_rfkill_list[] = { |
| {} |
| }; |
| |
| static int ideapad_acpi_add(struct platform_device *pdev) |
| { |
| int ret, i; |
| int cfg; |
| struct ideapad_private *priv; |
| struct acpi_device *adev; |
| acpi_status status; |
| |
| ret = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev); |
| if (ret) |
| return -ENODEV; |
| |
| if (read_method_int(adev->handle, "_CFG", &cfg)) |
| return -ENODEV; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| dev_set_drvdata(&pdev->dev, priv); |
| priv->cfg = cfg; |
| priv->adev = adev; |
| priv->platform_device = pdev; |
| priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list); |
| |
| /* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */ |
| priv->has_touchpad_switch = !acpi_dev_present("ELAN0634", NULL, -1); |
| |
| ret = ideapad_sysfs_init(priv); |
| if (ret) |
| return ret; |
| |
| ideapad_debugfs_init(priv); |
| |
| ret = ideapad_input_init(priv); |
| if (ret) |
| goto input_failed; |
| |
| /* |
| * On some models without a hw-switch (the yoga 2 13 at least) |
| * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work. |
| */ |
| if (!priv->has_hw_rfkill_switch) |
| write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1); |
| |
| /* The same for Touchpad */ |
| if (!priv->has_touchpad_switch) |
| write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1); |
| |
| for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) |
| if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg)) |
| ideapad_register_rfkill(priv, i); |
| |
| ideapad_sync_rfk_state(priv); |
| ideapad_sync_touchpad_state(priv); |
| |
| ideapad_dytc_profile_init(priv); |
| |
| if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { |
| ret = ideapad_backlight_init(priv); |
| if (ret && ret != -ENODEV) |
| goto backlight_failed; |
| } |
| status = acpi_install_notify_handler(adev->handle, |
| ACPI_DEVICE_NOTIFY, |
| ideapad_acpi_notify, priv); |
| if (ACPI_FAILURE(status)) { |
| ret = -EIO; |
| goto notification_failed; |
| } |
| |
| #if IS_ENABLED(CONFIG_ACPI_WMI) |
| for (i = 0; i < ARRAY_SIZE(ideapad_wmi_fnesc_events); i++) { |
| status = wmi_install_notify_handler(ideapad_wmi_fnesc_events[i], |
| ideapad_wmi_notify, priv); |
| if (ACPI_SUCCESS(status)) { |
| priv->fnesc_guid = ideapad_wmi_fnesc_events[i]; |
| break; |
| } |
| } |
| if (ACPI_FAILURE(status) && status != AE_NOT_EXIST) { |
| ret = -EIO; |
| goto notification_failed_wmi; |
| } |
| #endif |
| |
| return 0; |
| #if IS_ENABLED(CONFIG_ACPI_WMI) |
| notification_failed_wmi: |
| acpi_remove_notify_handler(priv->adev->handle, |
| ACPI_DEVICE_NOTIFY, ideapad_acpi_notify); |
| #endif |
| notification_failed: |
| ideapad_backlight_exit(priv); |
| backlight_failed: |
| ideapad_dytc_profile_exit(priv); |
| for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) |
| ideapad_unregister_rfkill(priv, i); |
| ideapad_input_exit(priv); |
| input_failed: |
| ideapad_debugfs_exit(priv); |
| ideapad_sysfs_exit(priv); |
| return ret; |
| } |
| |
| static int ideapad_acpi_remove(struct platform_device *pdev) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(&pdev->dev); |
| int i; |
| |
| #if IS_ENABLED(CONFIG_ACPI_WMI) |
| if (priv->fnesc_guid) |
| wmi_remove_notify_handler(priv->fnesc_guid); |
| #endif |
| acpi_remove_notify_handler(priv->adev->handle, |
| ACPI_DEVICE_NOTIFY, ideapad_acpi_notify); |
| ideapad_backlight_exit(priv); |
| ideapad_dytc_profile_exit(priv); |
| for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) |
| ideapad_unregister_rfkill(priv, i); |
| ideapad_input_exit(priv); |
| ideapad_debugfs_exit(priv); |
| ideapad_sysfs_exit(priv); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int ideapad_acpi_resume(struct device *dev) |
| { |
| struct ideapad_private *priv = dev_get_drvdata(dev); |
| |
| ideapad_sync_rfk_state(priv); |
| ideapad_sync_touchpad_state(priv); |
| |
| if (priv->dytc) |
| dytc_profile_refresh(priv); |
| |
| return 0; |
| } |
| #endif |
| static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); |
| |
| static const struct acpi_device_id ideapad_device_ids[] = { |
| { "VPC2004", 0}, |
| { "", 0}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); |
| |
| static struct platform_driver ideapad_acpi_driver = { |
| .probe = ideapad_acpi_add, |
| .remove = ideapad_acpi_remove, |
| .driver = { |
| .name = "ideapad_acpi", |
| .pm = &ideapad_pm, |
| .acpi_match_table = ACPI_PTR(ideapad_device_ids), |
| }, |
| }; |
| |
| module_platform_driver(ideapad_acpi_driver); |
| |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); |
| MODULE_DESCRIPTION("IdeaPad ACPI Extras"); |
| MODULE_LICENSE("GPL"); |