| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (C) STMicroelectronics 2018 |
| // Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics. |
| |
| #include <linux/interrupt.h> |
| #include <linux/mfd/stpmic1.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #include <dt-bindings/mfd/st,stpmic1.h> |
| |
| /** |
| * stpmic1 regulator description: this structure is used as driver data |
| * @desc: regulator framework description |
| * @mask_reset_reg: mask reset register address |
| * @mask_reset_mask: mask rank and mask reset register mask |
| * @icc_reg: icc register address |
| * @icc_mask: icc register mask |
| */ |
| struct stpmic1_regulator_cfg { |
| struct regulator_desc desc; |
| u8 mask_reset_reg; |
| u8 mask_reset_mask; |
| u8 icc_reg; |
| u8 icc_mask; |
| }; |
| |
| static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode); |
| static unsigned int stpmic1_get_mode(struct regulator_dev *rdev); |
| static int stpmic1_set_icc(struct regulator_dev *rdev); |
| static unsigned int stpmic1_map_mode(unsigned int mode); |
| |
| enum { |
| STPMIC1_BUCK1 = 0, |
| STPMIC1_BUCK2 = 1, |
| STPMIC1_BUCK3 = 2, |
| STPMIC1_BUCK4 = 3, |
| STPMIC1_LDO1 = 4, |
| STPMIC1_LDO2 = 5, |
| STPMIC1_LDO3 = 6, |
| STPMIC1_LDO4 = 7, |
| STPMIC1_LDO5 = 8, |
| STPMIC1_LDO6 = 9, |
| STPMIC1_VREF_DDR = 10, |
| STPMIC1_BOOST = 11, |
| STPMIC1_VBUS_OTG = 12, |
| STPMIC1_SW_OUT = 13, |
| }; |
| |
| /* Enable time worst case is 5000mV/(2250uV/uS) */ |
| #define PMIC_ENABLE_TIME_US 2200 |
| /* Ramp delay worst case is (2250uV/uS) */ |
| #define PMIC_RAMP_DELAY 2200 |
| |
| static const struct linear_range buck1_ranges[] = { |
| REGULATOR_LINEAR_RANGE(725000, 0, 4, 0), |
| REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000), |
| REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0), |
| }; |
| |
| static const struct linear_range buck2_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), |
| REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), |
| REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), |
| REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0), |
| REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0), |
| REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0), |
| REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), |
| REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), |
| REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), |
| REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), |
| REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), |
| }; |
| |
| static const struct linear_range buck3_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), |
| REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), |
| REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), |
| REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0), |
| REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0), |
| REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000), |
| REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), |
| }; |
| |
| static const struct linear_range buck4_ranges[] = { |
| REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), |
| REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), |
| REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), |
| REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), |
| REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), |
| REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000), |
| REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), |
| }; |
| |
| static const struct linear_range ldo1_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), |
| REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), |
| REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), |
| }; |
| |
| static const struct linear_range ldo2_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), |
| REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), |
| REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), |
| }; |
| |
| static const struct linear_range ldo3_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), |
| REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), |
| REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), |
| /* with index 31 LDO3 is in DDR mode */ |
| REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), |
| }; |
| |
| static const struct linear_range ldo5_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), |
| REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), |
| REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), |
| }; |
| |
| static const struct linear_range ldo6_ranges[] = { |
| REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), |
| REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), |
| }; |
| |
| static const struct regulator_ops stpmic1_ldo_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_over_current_protection = stpmic1_set_icc, |
| }; |
| |
| static const struct regulator_ops stpmic1_ldo3_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_iterate, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_bypass = regulator_get_bypass_regmap, |
| .set_bypass = regulator_set_bypass_regmap, |
| .set_over_current_protection = stpmic1_set_icc, |
| }; |
| |
| static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .set_over_current_protection = stpmic1_set_icc, |
| }; |
| |
| static const struct regulator_ops stpmic1_buck_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_pull_down = regulator_set_pull_down_regmap, |
| .set_mode = stpmic1_set_mode, |
| .get_mode = stpmic1_get_mode, |
| .set_over_current_protection = stpmic1_set_icc, |
| }; |
| |
| static const struct regulator_ops stpmic1_vref_ddr_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| }; |
| |
| static const struct regulator_ops stpmic1_boost_regul_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .set_over_current_protection = stpmic1_set_icc, |
| }; |
| |
| static const struct regulator_ops stpmic1_switch_regul_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .set_over_current_protection = stpmic1_set_icc, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| }; |
| |
| #define REG_LDO(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 32, \ |
| .ops = &stpmic1_ldo_ops, \ |
| .linear_ranges = base ## _ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = ids##_ACTIVE_CR, \ |
| .vsel_mask = LDO_VOLTAGE_MASK, \ |
| .enable_reg = ids##_ACTIVE_CR, \ |
| .enable_mask = LDO_ENABLE_MASK, \ |
| .enable_val = 1, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .ramp_delay = PMIC_RAMP_DELAY, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_LDO3(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 32, \ |
| .ops = &stpmic1_ldo3_ops, \ |
| .linear_ranges = ldo3_ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = LDO3_ACTIVE_CR, \ |
| .vsel_mask = LDO_VOLTAGE_MASK, \ |
| .enable_reg = LDO3_ACTIVE_CR, \ |
| .enable_mask = LDO_ENABLE_MASK, \ |
| .enable_val = 1, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .ramp_delay = PMIC_RAMP_DELAY, \ |
| .bypass_reg = LDO3_ACTIVE_CR, \ |
| .bypass_mask = LDO_BYPASS_MASK, \ |
| .bypass_val_on = LDO_BYPASS_MASK, \ |
| .bypass_val_off = 0, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_LDO4(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 1, \ |
| .ops = &stpmic1_ldo4_fixed_regul_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = 3300000, \ |
| .fixed_uV = 3300000, \ |
| .enable_reg = LDO4_ACTIVE_CR, \ |
| .enable_mask = LDO_ENABLE_MASK, \ |
| .enable_val = 1, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .ramp_delay = PMIC_RAMP_DELAY, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_BUCK(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .ops = &stpmic1_buck_ops, \ |
| .n_voltages = 64, \ |
| .linear_ranges = base ## _ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = ids##_ACTIVE_CR, \ |
| .vsel_mask = BUCK_VOLTAGE_MASK, \ |
| .enable_reg = ids##_ACTIVE_CR, \ |
| .enable_mask = BUCK_ENABLE_MASK, \ |
| .enable_val = 1, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .ramp_delay = PMIC_RAMP_DELAY, \ |
| .of_map_mode = stpmic1_map_mode, \ |
| .pull_down_reg = ids##_PULL_DOWN_REG, \ |
| .pull_down_mask = ids##_PULL_DOWN_MASK, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_VREF_DDR(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 1, \ |
| .ops = &stpmic1_vref_ddr_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = 500000, \ |
| .fixed_uV = 500000, \ |
| .enable_reg = VREF_DDR_ACTIVE_CR, \ |
| .enable_mask = BUCK_ENABLE_MASK, \ |
| .enable_val = 1, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_BOOST(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 1, \ |
| .ops = &stpmic1_boost_regul_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = 0, \ |
| .fixed_uV = 5000000, \ |
| .enable_reg = BST_SW_CR, \ |
| .enable_mask = BOOST_ENABLED, \ |
| .enable_val = BOOST_ENABLED, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .supply_name = #base, \ |
| } |
| |
| #define REG_VBUS_OTG(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 1, \ |
| .ops = &stpmic1_switch_regul_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = 0, \ |
| .fixed_uV = 5000000, \ |
| .enable_reg = BST_SW_CR, \ |
| .enable_mask = USBSW_OTG_SWITCH_ENABLED, \ |
| .enable_val = USBSW_OTG_SWITCH_ENABLED, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .supply_name = #base, \ |
| .active_discharge_reg = BST_SW_CR, \ |
| .active_discharge_mask = VBUS_OTG_DISCHARGE, \ |
| .active_discharge_on = VBUS_OTG_DISCHARGE, \ |
| } |
| |
| #define REG_SW_OUT(ids, base) { \ |
| .name = #ids, \ |
| .id = STPMIC1_##ids, \ |
| .n_voltages = 1, \ |
| .ops = &stpmic1_switch_regul_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = 0, \ |
| .fixed_uV = 5000000, \ |
| .enable_reg = BST_SW_CR, \ |
| .enable_mask = SWIN_SWOUT_ENABLED, \ |
| .enable_val = SWIN_SWOUT_ENABLED, \ |
| .disable_val = 0, \ |
| .enable_time = PMIC_ENABLE_TIME_US, \ |
| .supply_name = #base, \ |
| .active_discharge_reg = BST_SW_CR, \ |
| .active_discharge_mask = SW_OUT_DISCHARGE, \ |
| .active_discharge_on = SW_OUT_DISCHARGE, \ |
| } |
| |
| static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = { |
| [STPMIC1_BUCK1] = { |
| .desc = REG_BUCK(BUCK1, buck1), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(0), |
| .mask_reset_reg = BUCKS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(0), |
| }, |
| [STPMIC1_BUCK2] = { |
| .desc = REG_BUCK(BUCK2, buck2), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(1), |
| .mask_reset_reg = BUCKS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(1), |
| }, |
| [STPMIC1_BUCK3] = { |
| .desc = REG_BUCK(BUCK3, buck3), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(2), |
| .mask_reset_reg = BUCKS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(2), |
| }, |
| [STPMIC1_BUCK4] = { |
| .desc = REG_BUCK(BUCK4, buck4), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(3), |
| .mask_reset_reg = BUCKS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(3), |
| }, |
| [STPMIC1_LDO1] = { |
| .desc = REG_LDO(LDO1, ldo1), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(0), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(0), |
| }, |
| [STPMIC1_LDO2] = { |
| .desc = REG_LDO(LDO2, ldo2), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(1), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(1), |
| }, |
| [STPMIC1_LDO3] = { |
| .desc = REG_LDO3(LDO3, ldo3), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(2), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(2), |
| }, |
| [STPMIC1_LDO4] = { |
| .desc = REG_LDO4(LDO4, ldo4), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(3), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(3), |
| }, |
| [STPMIC1_LDO5] = { |
| .desc = REG_LDO(LDO5, ldo5), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(4), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(4), |
| }, |
| [STPMIC1_LDO6] = { |
| .desc = REG_LDO(LDO6, ldo6), |
| .icc_reg = LDOS_ICCTO_CR, |
| .icc_mask = BIT(5), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(5), |
| }, |
| [STPMIC1_VREF_DDR] = { |
| .desc = REG_VREF_DDR(VREF_DDR, vref_ddr), |
| .mask_reset_reg = LDOS_MASK_RESET_CR, |
| .mask_reset_mask = BIT(6), |
| }, |
| [STPMIC1_BOOST] = { |
| .desc = REG_BOOST(BOOST, boost), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(6), |
| }, |
| [STPMIC1_VBUS_OTG] = { |
| .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(4), |
| }, |
| [STPMIC1_SW_OUT] = { |
| .desc = REG_SW_OUT(SW_OUT, pwr_sw2), |
| .icc_reg = BUCKS_ICCTO_CR, |
| .icc_mask = BIT(5), |
| }, |
| }; |
| |
| static unsigned int stpmic1_map_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case STPMIC1_BUCK_MODE_NORMAL: |
| return REGULATOR_MODE_NORMAL; |
| case STPMIC1_BUCK_MODE_LP: |
| return REGULATOR_MODE_STANDBY; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static unsigned int stpmic1_get_mode(struct regulator_dev *rdev) |
| { |
| int value; |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| |
| regmap_read(regmap, rdev->desc->enable_reg, &value); |
| |
| if (value & STPMIC1_BUCK_MODE_LP) |
| return REGULATOR_MODE_STANDBY; |
| |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| int value; |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| value = STPMIC1_BUCK_MODE_NORMAL; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| value = STPMIC1_BUCK_MODE_LP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(regmap, rdev->desc->enable_reg, |
| STPMIC1_BUCK_MODE_LP, value); |
| } |
| |
| static int stpmic1_set_icc(struct regulator_dev *rdev) |
| { |
| struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev); |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| |
| /* enable switch off in case of over current */ |
| return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask, |
| cfg->icc_mask); |
| } |
| |
| static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data) |
| { |
| struct regulator_dev *rdev = (struct regulator_dev *)data; |
| |
| regulator_lock(rdev); |
| |
| /* Send an overcurrent notification */ |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_OVER_CURRENT, |
| NULL); |
| |
| regulator_unlock(rdev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define MATCH(_name, _id) \ |
| [STPMIC1_##_id] = { \ |
| .name = #_name, \ |
| .desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \ |
| } |
| |
| static struct of_regulator_match stpmic1_matches[] = { |
| MATCH(buck1, BUCK1), |
| MATCH(buck2, BUCK2), |
| MATCH(buck3, BUCK3), |
| MATCH(buck4, BUCK4), |
| MATCH(ldo1, LDO1), |
| MATCH(ldo2, LDO2), |
| MATCH(ldo3, LDO3), |
| MATCH(ldo4, LDO4), |
| MATCH(ldo5, LDO5), |
| MATCH(ldo6, LDO6), |
| MATCH(vref_ddr, VREF_DDR), |
| MATCH(boost, BOOST), |
| MATCH(pwr_sw1, VBUS_OTG), |
| MATCH(pwr_sw2, SW_OUT), |
| }; |
| |
| static int stpmic1_regulator_register(struct platform_device *pdev, int id, |
| struct of_regulator_match *match, |
| const struct stpmic1_regulator_cfg *cfg) |
| { |
| struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_dev *rdev; |
| struct regulator_config config = {}; |
| int ret = 0; |
| int irq; |
| |
| config.dev = &pdev->dev; |
| config.init_data = match->init_data; |
| config.of_node = match->of_node; |
| config.regmap = pmic_dev->regmap; |
| config.driver_data = (void *)cfg; |
| |
| rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "failed to register %s regulator\n", |
| cfg->desc.name); |
| return PTR_ERR(rdev); |
| } |
| |
| /* set mask reset */ |
| if (of_get_property(config.of_node, "st,mask-reset", NULL) && |
| cfg->mask_reset_reg != 0) { |
| ret = regmap_update_bits(pmic_dev->regmap, |
| cfg->mask_reset_reg, |
| cfg->mask_reset_mask, |
| cfg->mask_reset_mask); |
| if (ret) { |
| dev_err(&pdev->dev, "set mask reset failed\n"); |
| return ret; |
| } |
| } |
| |
| /* setup an irq handler for over-current detection */ |
| irq = of_irq_get(config.of_node, 0); |
| if (irq > 0) { |
| ret = devm_request_threaded_irq(&pdev->dev, |
| irq, NULL, |
| stpmic1_curlim_irq_handler, |
| IRQF_ONESHOT | IRQF_SHARED, |
| pdev->name, rdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Request IRQ failed\n"); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static int stpmic1_regulator_probe(struct platform_device *pdev) |
| { |
| int i, ret; |
| |
| ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches, |
| ARRAY_SIZE(stpmic1_matches)); |
| if (ret < 0) { |
| dev_err(&pdev->dev, |
| "Error in PMIC regulator device tree node"); |
| return ret; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) { |
| ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i], |
| &stpmic1_regulator_cfgs[i]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_pmic_regulator_match[] = { |
| { .compatible = "st,stpmic1-regulators" }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, of_pmic_regulator_match); |
| |
| static struct platform_driver stpmic1_regulator_driver = { |
| .driver = { |
| .name = "stpmic1-regulator", |
| .of_match_table = of_match_ptr(of_pmic_regulator_match), |
| }, |
| .probe = stpmic1_regulator_probe, |
| }; |
| |
| module_platform_driver(stpmic1_regulator_driver); |
| |
| MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver"); |
| MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>"); |
| MODULE_LICENSE("GPL v2"); |