| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| /* |
| * LTC2992 - Dual Wide Range Power Monitor |
| * |
| * Copyright 2020 Analog Devices Inc. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/hwmon.h> |
| #include <linux/i2c.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| #define LTC2992_CTRLB 0x01 |
| #define LTC2992_FAULT1 0x03 |
| #define LTC2992_POWER1 0x05 |
| #define LTC2992_POWER1_MAX 0x08 |
| #define LTC2992_POWER1_MIN 0x0B |
| #define LTC2992_POWER1_MAX_THRESH 0x0E |
| #define LTC2992_POWER1_MIN_THRESH 0x11 |
| #define LTC2992_DSENSE1 0x14 |
| #define LTC2992_DSENSE1_MAX 0x16 |
| #define LTC2992_DSENSE1_MIN 0x18 |
| #define LTC2992_DSENSE1_MAX_THRESH 0x1A |
| #define LTC2992_DSENSE1_MIN_THRESH 0x1C |
| #define LTC2992_SENSE1 0x1E |
| #define LTC2992_SENSE1_MAX 0x20 |
| #define LTC2992_SENSE1_MIN 0x22 |
| #define LTC2992_SENSE1_MAX_THRESH 0x24 |
| #define LTC2992_SENSE1_MIN_THRESH 0x26 |
| #define LTC2992_G1 0x28 |
| #define LTC2992_G1_MAX 0x2A |
| #define LTC2992_G1_MIN 0x2C |
| #define LTC2992_G1_MAX_THRESH 0x2E |
| #define LTC2992_G1_MIN_THRESH 0x30 |
| #define LTC2992_FAULT2 0x35 |
| #define LTC2992_G2 0x5A |
| #define LTC2992_G2_MAX 0x5C |
| #define LTC2992_G2_MIN 0x5E |
| #define LTC2992_G2_MAX_THRESH 0x60 |
| #define LTC2992_G2_MIN_THRESH 0x62 |
| #define LTC2992_G3 0x64 |
| #define LTC2992_G3_MAX 0x66 |
| #define LTC2992_G3_MIN 0x68 |
| #define LTC2992_G3_MAX_THRESH 0x6A |
| #define LTC2992_G3_MIN_THRESH 0x6C |
| #define LTC2992_G4 0x6E |
| #define LTC2992_G4_MAX 0x70 |
| #define LTC2992_G4_MIN 0x72 |
| #define LTC2992_G4_MAX_THRESH 0x74 |
| #define LTC2992_G4_MIN_THRESH 0x76 |
| #define LTC2992_FAULT3 0x92 |
| #define LTC2992_GPIO_STATUS 0x95 |
| #define LTC2992_GPIO_IO_CTRL 0x96 |
| #define LTC2992_GPIO_CTRL 0x97 |
| |
| #define LTC2992_POWER(x) (LTC2992_POWER1 + ((x) * 0x32)) |
| #define LTC2992_POWER_MAX(x) (LTC2992_POWER1_MAX + ((x) * 0x32)) |
| #define LTC2992_POWER_MIN(x) (LTC2992_POWER1_MIN + ((x) * 0x32)) |
| #define LTC2992_POWER_MAX_THRESH(x) (LTC2992_POWER1_MAX_THRESH + ((x) * 0x32)) |
| #define LTC2992_POWER_MIN_THRESH(x) (LTC2992_POWER1_MIN_THRESH + ((x) * 0x32)) |
| #define LTC2992_DSENSE(x) (LTC2992_DSENSE1 + ((x) * 0x32)) |
| #define LTC2992_DSENSE_MAX(x) (LTC2992_DSENSE1_MAX + ((x) * 0x32)) |
| #define LTC2992_DSENSE_MIN(x) (LTC2992_DSENSE1_MIN + ((x) * 0x32)) |
| #define LTC2992_DSENSE_MAX_THRESH(x) (LTC2992_DSENSE1_MAX_THRESH + ((x) * 0x32)) |
| #define LTC2992_DSENSE_MIN_THRESH(x) (LTC2992_DSENSE1_MIN_THRESH + ((x) * 0x32)) |
| #define LTC2992_SENSE(x) (LTC2992_SENSE1 + ((x) * 0x32)) |
| #define LTC2992_SENSE_MAX(x) (LTC2992_SENSE1_MAX + ((x) * 0x32)) |
| #define LTC2992_SENSE_MIN(x) (LTC2992_SENSE1_MIN + ((x) * 0x32)) |
| #define LTC2992_SENSE_MAX_THRESH(x) (LTC2992_SENSE1_MAX_THRESH + ((x) * 0x32)) |
| #define LTC2992_SENSE_MIN_THRESH(x) (LTC2992_SENSE1_MIN_THRESH + ((x) * 0x32)) |
| #define LTC2992_POWER_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32)) |
| #define LTC2992_SENSE_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32)) |
| #define LTC2992_DSENSE_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32)) |
| |
| /* CTRLB register bitfields */ |
| #define LTC2992_RESET_HISTORY BIT(3) |
| |
| /* FAULT1 FAULT2 registers common bitfields */ |
| #define LTC2992_POWER_FAULT_MSK(x) (BIT(6) << (x)) |
| #define LTC2992_DSENSE_FAULT_MSK(x) (BIT(4) << (x)) |
| #define LTC2992_SENSE_FAULT_MSK(x) (BIT(2) << (x)) |
| |
| /* FAULT1 bitfields */ |
| #define LTC2992_GPIO1_FAULT_MSK(x) (BIT(0) << (x)) |
| |
| /* FAULT2 bitfields */ |
| #define LTC2992_GPIO2_FAULT_MSK(x) (BIT(0) << (x)) |
| |
| /* FAULT3 bitfields */ |
| #define LTC2992_GPIO3_FAULT_MSK(x) (BIT(6) << (x)) |
| #define LTC2992_GPIO4_FAULT_MSK(x) (BIT(4) << (x)) |
| |
| #define LTC2992_IADC_NANOV_LSB 12500 |
| #define LTC2992_VADC_UV_LSB 25000 |
| #define LTC2992_VADC_GPIO_UV_LSB 500 |
| |
| #define LTC2992_GPIO_NR 4 |
| #define LTC2992_GPIO1_BIT 7 |
| #define LTC2992_GPIO2_BIT 6 |
| #define LTC2992_GPIO3_BIT 0 |
| #define LTC2992_GPIO4_BIT 6 |
| #define LTC2992_GPIO_BIT(x) (LTC2992_GPIO_NR - (x) - 1) |
| |
| struct ltc2992_state { |
| struct i2c_client *client; |
| struct gpio_chip gc; |
| struct mutex gpio_mutex; /* lock for gpio access */ |
| const char *gpio_names[LTC2992_GPIO_NR]; |
| struct regmap *regmap; |
| u32 r_sense_uohm[2]; |
| }; |
| |
| struct ltc2992_gpio_regs { |
| u8 data; |
| u8 max; |
| u8 min; |
| u8 max_thresh; |
| u8 min_thresh; |
| u8 alarm; |
| u8 min_alarm_msk; |
| u8 max_alarm_msk; |
| u8 ctrl; |
| u8 ctrl_bit; |
| }; |
| |
| static const struct ltc2992_gpio_regs ltc2992_gpio_addr_map[] = { |
| { |
| .data = LTC2992_G1, |
| .max = LTC2992_G1_MAX, |
| .min = LTC2992_G1_MIN, |
| .max_thresh = LTC2992_G1_MAX_THRESH, |
| .min_thresh = LTC2992_G1_MIN_THRESH, |
| .alarm = LTC2992_FAULT1, |
| .min_alarm_msk = LTC2992_GPIO1_FAULT_MSK(0), |
| .max_alarm_msk = LTC2992_GPIO1_FAULT_MSK(1), |
| .ctrl = LTC2992_GPIO_IO_CTRL, |
| .ctrl_bit = LTC2992_GPIO1_BIT, |
| }, |
| { |
| .data = LTC2992_G2, |
| .max = LTC2992_G2_MAX, |
| .min = LTC2992_G2_MIN, |
| .max_thresh = LTC2992_G2_MAX_THRESH, |
| .min_thresh = LTC2992_G2_MIN_THRESH, |
| .alarm = LTC2992_FAULT2, |
| .min_alarm_msk = LTC2992_GPIO2_FAULT_MSK(0), |
| .max_alarm_msk = LTC2992_GPIO2_FAULT_MSK(1), |
| .ctrl = LTC2992_GPIO_IO_CTRL, |
| .ctrl_bit = LTC2992_GPIO2_BIT, |
| }, |
| { |
| .data = LTC2992_G3, |
| .max = LTC2992_G3_MAX, |
| .min = LTC2992_G3_MIN, |
| .max_thresh = LTC2992_G3_MAX_THRESH, |
| .min_thresh = LTC2992_G3_MIN_THRESH, |
| .alarm = LTC2992_FAULT3, |
| .min_alarm_msk = LTC2992_GPIO3_FAULT_MSK(0), |
| .max_alarm_msk = LTC2992_GPIO3_FAULT_MSK(1), |
| .ctrl = LTC2992_GPIO_IO_CTRL, |
| .ctrl_bit = LTC2992_GPIO3_BIT, |
| }, |
| { |
| .data = LTC2992_G4, |
| .max = LTC2992_G4_MAX, |
| .min = LTC2992_G4_MIN, |
| .max_thresh = LTC2992_G4_MAX_THRESH, |
| .min_thresh = LTC2992_G4_MIN_THRESH, |
| .alarm = LTC2992_FAULT3, |
| .min_alarm_msk = LTC2992_GPIO4_FAULT_MSK(0), |
| .max_alarm_msk = LTC2992_GPIO4_FAULT_MSK(1), |
| .ctrl = LTC2992_GPIO_CTRL, |
| .ctrl_bit = LTC2992_GPIO4_BIT, |
| }, |
| }; |
| |
| static const char *ltc2992_gpio_names[LTC2992_GPIO_NR] = { |
| "GPIO1", "GPIO2", "GPIO3", "GPIO4", |
| }; |
| |
| static int ltc2992_read_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len) |
| { |
| u8 regvals[4]; |
| int val; |
| int ret; |
| int i; |
| |
| ret = regmap_bulk_read(st->regmap, addr, regvals, reg_len); |
| if (ret < 0) |
| return ret; |
| |
| val = 0; |
| for (i = 0; i < reg_len; i++) |
| val |= regvals[reg_len - i - 1] << (i * 8); |
| |
| return val; |
| } |
| |
| static int ltc2992_write_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len, u32 val) |
| { |
| u8 regvals[4]; |
| int i; |
| |
| for (i = 0; i < reg_len; i++) |
| regvals[reg_len - i - 1] = (val >> (i * 8)) & 0xFF; |
| |
| return regmap_bulk_write(st->regmap, addr, regvals, reg_len); |
| } |
| |
| static int ltc2992_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct ltc2992_state *st = gpiochip_get_data(chip); |
| unsigned long gpio_status; |
| int reg; |
| |
| mutex_lock(&st->gpio_mutex); |
| reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1); |
| mutex_unlock(&st->gpio_mutex); |
| |
| if (reg < 0) |
| return reg; |
| |
| gpio_status = reg; |
| |
| return !test_bit(LTC2992_GPIO_BIT(offset), &gpio_status); |
| } |
| |
| static int ltc2992_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, |
| unsigned long *bits) |
| { |
| struct ltc2992_state *st = gpiochip_get_data(chip); |
| unsigned long gpio_status; |
| unsigned int gpio_nr; |
| int reg; |
| |
| mutex_lock(&st->gpio_mutex); |
| reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1); |
| mutex_unlock(&st->gpio_mutex); |
| |
| if (reg < 0) |
| return reg; |
| |
| gpio_status = reg; |
| |
| gpio_nr = 0; |
| for_each_set_bit_from(gpio_nr, mask, LTC2992_GPIO_NR) { |
| if (test_bit(LTC2992_GPIO_BIT(gpio_nr), &gpio_status)) |
| set_bit(gpio_nr, bits); |
| } |
| |
| return 0; |
| } |
| |
| static void ltc2992_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) |
| { |
| struct ltc2992_state *st = gpiochip_get_data(chip); |
| unsigned long gpio_ctrl; |
| int reg; |
| |
| mutex_lock(&st->gpio_mutex); |
| reg = ltc2992_read_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1); |
| if (reg < 0) { |
| mutex_unlock(&st->gpio_mutex); |
| return; |
| } |
| |
| gpio_ctrl = reg; |
| assign_bit(ltc2992_gpio_addr_map[offset].ctrl_bit, &gpio_ctrl, value); |
| |
| ltc2992_write_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1, gpio_ctrl); |
| mutex_unlock(&st->gpio_mutex); |
| } |
| |
| static void ltc2992_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask, |
| unsigned long *bits) |
| { |
| struct ltc2992_state *st = gpiochip_get_data(chip); |
| unsigned long gpio_ctrl_io = 0; |
| unsigned long gpio_ctrl = 0; |
| unsigned int gpio_nr; |
| |
| for_each_set_bit(gpio_nr, mask, LTC2992_GPIO_NR) { |
| if (gpio_nr < 3) |
| assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl_io, true); |
| |
| if (gpio_nr == 3) |
| assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl, true); |
| } |
| |
| mutex_lock(&st->gpio_mutex); |
| ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, gpio_ctrl_io); |
| ltc2992_write_reg(st, LTC2992_GPIO_CTRL, 1, gpio_ctrl); |
| mutex_unlock(&st->gpio_mutex); |
| } |
| |
| static int ltc2992_config_gpio(struct ltc2992_state *st) |
| { |
| const char *name = dev_name(&st->client->dev); |
| char *gpio_name; |
| int ret; |
| int i; |
| |
| ret = ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, 0); |
| if (ret < 0) |
| return ret; |
| |
| mutex_init(&st->gpio_mutex); |
| |
| for (i = 0; i < ARRAY_SIZE(st->gpio_names); i++) { |
| gpio_name = devm_kasprintf(&st->client->dev, GFP_KERNEL, "ltc2992-%x-%s", |
| st->client->addr, ltc2992_gpio_names[i]); |
| if (!gpio_name) |
| return -ENOMEM; |
| |
| st->gpio_names[i] = gpio_name; |
| } |
| |
| st->gc.label = name; |
| st->gc.parent = &st->client->dev; |
| st->gc.owner = THIS_MODULE; |
| st->gc.base = -1; |
| st->gc.names = st->gpio_names; |
| st->gc.ngpio = ARRAY_SIZE(st->gpio_names); |
| st->gc.get = ltc2992_gpio_get; |
| st->gc.get_multiple = ltc2992_gpio_get_multiple; |
| st->gc.set = ltc2992_gpio_set; |
| st->gc.set_multiple = ltc2992_gpio_set_multiple; |
| |
| ret = devm_gpiochip_add_data(&st->client->dev, &st->gc, st); |
| if (ret) |
| dev_err(&st->client->dev, "GPIO registering failed (%d)\n", ret); |
| |
| return ret; |
| } |
| |
| static umode_t ltc2992_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, |
| int channel) |
| { |
| const struct ltc2992_state *st = data; |
| |
| switch (type) { |
| case hwmon_chip: |
| switch (attr) { |
| case hwmon_chip_in_reset_history: |
| return 0200; |
| } |
| break; |
| case hwmon_in: |
| switch (attr) { |
| case hwmon_in_input: |
| case hwmon_in_lowest: |
| case hwmon_in_highest: |
| case hwmon_in_min_alarm: |
| case hwmon_in_max_alarm: |
| return 0444; |
| case hwmon_in_min: |
| case hwmon_in_max: |
| return 0644; |
| } |
| break; |
| case hwmon_curr: |
| switch (attr) { |
| case hwmon_curr_input: |
| case hwmon_curr_lowest: |
| case hwmon_curr_highest: |
| case hwmon_curr_min_alarm: |
| case hwmon_curr_max_alarm: |
| if (st->r_sense_uohm[channel]) |
| return 0444; |
| break; |
| case hwmon_curr_min: |
| case hwmon_curr_max: |
| if (st->r_sense_uohm[channel]) |
| return 0644; |
| break; |
| } |
| break; |
| case hwmon_power: |
| switch (attr) { |
| case hwmon_power_input: |
| case hwmon_power_input_lowest: |
| case hwmon_power_input_highest: |
| case hwmon_power_min_alarm: |
| case hwmon_power_max_alarm: |
| if (st->r_sense_uohm[channel]) |
| return 0444; |
| break; |
| case hwmon_power_min: |
| case hwmon_power_max: |
| if (st->r_sense_uohm[channel]) |
| return 0644; |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ltc2992_get_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long *val) |
| { |
| int reg_val; |
| |
| reg_val = ltc2992_read_reg(st, reg, 2); |
| if (reg_val < 0) |
| return reg_val; |
| |
| reg_val = reg_val >> 4; |
| *val = DIV_ROUND_CLOSEST(reg_val * scale, 1000); |
| |
| return 0; |
| } |
| |
| static int ltc2992_set_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long val) |
| { |
| val = DIV_ROUND_CLOSEST(val * 1000, scale); |
| val = val << 4; |
| |
| return ltc2992_write_reg(st, reg, 2, val); |
| } |
| |
| static int ltc2992_read_gpio_alarm(struct ltc2992_state *st, int nr_gpio, u32 attr, long *val) |
| { |
| int reg_val; |
| u32 mask; |
| |
| if (attr == hwmon_in_max_alarm) |
| mask = ltc2992_gpio_addr_map[nr_gpio].max_alarm_msk; |
| else |
| mask = ltc2992_gpio_addr_map[nr_gpio].min_alarm_msk; |
| |
| reg_val = ltc2992_read_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1); |
| if (reg_val < 0) |
| return reg_val; |
| |
| *val = !!(reg_val & mask); |
| reg_val &= ~mask; |
| |
| return ltc2992_write_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1, reg_val); |
| } |
| |
| static int ltc2992_read_gpios_in(struct device *dev, u32 attr, int nr_gpio, long *val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_in_input: |
| reg = ltc2992_gpio_addr_map[nr_gpio].data; |
| break; |
| case hwmon_in_lowest: |
| reg = ltc2992_gpio_addr_map[nr_gpio].min; |
| break; |
| case hwmon_in_highest: |
| reg = ltc2992_gpio_addr_map[nr_gpio].max; |
| break; |
| case hwmon_in_min: |
| reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh; |
| break; |
| case hwmon_in_max: |
| reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh; |
| break; |
| case hwmon_in_min_alarm: |
| case hwmon_in_max_alarm: |
| return ltc2992_read_gpio_alarm(st, nr_gpio, attr, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_get_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val); |
| } |
| |
| static int ltc2992_read_in_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr) |
| { |
| int reg_val; |
| u32 mask; |
| |
| if (attr == hwmon_in_max_alarm) |
| mask = LTC2992_SENSE_FAULT_MSK(1); |
| else |
| mask = LTC2992_SENSE_FAULT_MSK(0); |
| |
| reg_val = ltc2992_read_reg(st, LTC2992_SENSE_FAULT(channel), 1); |
| if (reg_val < 0) |
| return reg_val; |
| |
| *val = !!(reg_val & mask); |
| reg_val &= ~mask; |
| |
| return ltc2992_write_reg(st, LTC2992_SENSE_FAULT(channel), 1, reg_val); |
| } |
| |
| static int ltc2992_read_in(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| if (channel > 1) |
| return ltc2992_read_gpios_in(dev, attr, channel - 2, val); |
| |
| switch (attr) { |
| case hwmon_in_input: |
| reg = LTC2992_SENSE(channel); |
| break; |
| case hwmon_in_lowest: |
| reg = LTC2992_SENSE_MIN(channel); |
| break; |
| case hwmon_in_highest: |
| reg = LTC2992_SENSE_MAX(channel); |
| break; |
| case hwmon_in_min: |
| reg = LTC2992_SENSE_MIN_THRESH(channel); |
| break; |
| case hwmon_in_max: |
| reg = LTC2992_SENSE_MAX_THRESH(channel); |
| break; |
| case hwmon_in_min_alarm: |
| case hwmon_in_max_alarm: |
| return ltc2992_read_in_alarm(st, channel, val, attr); |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_get_voltage(st, reg, LTC2992_VADC_UV_LSB, val); |
| } |
| |
| static int ltc2992_get_current(struct ltc2992_state *st, u32 reg, u32 channel, long *val) |
| { |
| int reg_val; |
| |
| reg_val = ltc2992_read_reg(st, reg, 2); |
| if (reg_val < 0) |
| return reg_val; |
| |
| reg_val = reg_val >> 4; |
| *val = DIV_ROUND_CLOSEST(reg_val * LTC2992_IADC_NANOV_LSB, st->r_sense_uohm[channel]); |
| |
| return 0; |
| } |
| |
| static int ltc2992_set_current(struct ltc2992_state *st, u32 reg, u32 channel, long val) |
| { |
| u32 reg_val; |
| |
| reg_val = DIV_ROUND_CLOSEST(val * st->r_sense_uohm[channel], LTC2992_IADC_NANOV_LSB); |
| reg_val = reg_val << 4; |
| |
| return ltc2992_write_reg(st, reg, 2, reg_val); |
| } |
| |
| static int ltc2992_read_curr_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr) |
| { |
| int reg_val; |
| u32 mask; |
| |
| if (attr == hwmon_curr_max_alarm) |
| mask = LTC2992_DSENSE_FAULT_MSK(1); |
| else |
| mask = LTC2992_DSENSE_FAULT_MSK(0); |
| |
| reg_val = ltc2992_read_reg(st, LTC2992_DSENSE_FAULT(channel), 1); |
| if (reg_val < 0) |
| return reg_val; |
| |
| *val = !!(reg_val & mask); |
| |
| reg_val &= ~mask; |
| return ltc2992_write_reg(st, LTC2992_DSENSE_FAULT(channel), 1, reg_val); |
| } |
| |
| static int ltc2992_read_curr(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_curr_input: |
| reg = LTC2992_DSENSE(channel); |
| break; |
| case hwmon_curr_lowest: |
| reg = LTC2992_DSENSE_MIN(channel); |
| break; |
| case hwmon_curr_highest: |
| reg = LTC2992_DSENSE_MAX(channel); |
| break; |
| case hwmon_curr_min: |
| reg = LTC2992_DSENSE_MIN_THRESH(channel); |
| break; |
| case hwmon_curr_max: |
| reg = LTC2992_DSENSE_MAX_THRESH(channel); |
| break; |
| case hwmon_curr_min_alarm: |
| case hwmon_curr_max_alarm: |
| return ltc2992_read_curr_alarm(st, channel, val, attr); |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_get_current(st, reg, channel, val); |
| } |
| |
| static int ltc2992_get_power(struct ltc2992_state *st, u32 reg, u32 channel, long *val) |
| { |
| int reg_val; |
| |
| reg_val = ltc2992_read_reg(st, reg, 3); |
| if (reg_val < 0) |
| return reg_val; |
| |
| *val = mul_u64_u32_div(reg_val, LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB, |
| st->r_sense_uohm[channel] * 1000); |
| |
| return 0; |
| } |
| |
| static int ltc2992_set_power(struct ltc2992_state *st, u32 reg, u32 channel, long val) |
| { |
| u32 reg_val; |
| |
| reg_val = mul_u64_u32_div(val, st->r_sense_uohm[channel] * 1000, |
| LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB); |
| |
| return ltc2992_write_reg(st, reg, 3, reg_val); |
| } |
| |
| static int ltc2992_read_power_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr) |
| { |
| int reg_val; |
| u32 mask; |
| |
| if (attr == hwmon_power_max_alarm) |
| mask = LTC2992_POWER_FAULT_MSK(1); |
| else |
| mask = LTC2992_POWER_FAULT_MSK(0); |
| |
| reg_val = ltc2992_read_reg(st, LTC2992_POWER_FAULT(channel), 1); |
| if (reg_val < 0) |
| return reg_val; |
| |
| *val = !!(reg_val & mask); |
| reg_val &= ~mask; |
| |
| return ltc2992_write_reg(st, LTC2992_POWER_FAULT(channel), 1, reg_val); |
| } |
| |
| static int ltc2992_read_power(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_power_input: |
| reg = LTC2992_POWER(channel); |
| break; |
| case hwmon_power_input_lowest: |
| reg = LTC2992_POWER_MIN(channel); |
| break; |
| case hwmon_power_input_highest: |
| reg = LTC2992_POWER_MAX(channel); |
| break; |
| case hwmon_power_min: |
| reg = LTC2992_POWER_MIN_THRESH(channel); |
| break; |
| case hwmon_power_max: |
| reg = LTC2992_POWER_MAX_THRESH(channel); |
| break; |
| case hwmon_power_min_alarm: |
| case hwmon_power_max_alarm: |
| return ltc2992_read_power_alarm(st, channel, val, attr); |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_get_power(st, reg, channel, val); |
| } |
| |
| static int ltc2992_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, |
| long *val) |
| { |
| switch (type) { |
| case hwmon_in: |
| return ltc2992_read_in(dev, attr, channel, val); |
| case hwmon_curr: |
| return ltc2992_read_curr(dev, attr, channel, val); |
| case hwmon_power: |
| return ltc2992_read_power(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int ltc2992_write_curr(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_curr_min: |
| reg = LTC2992_DSENSE_MIN_THRESH(channel); |
| break; |
| case hwmon_curr_max: |
| reg = LTC2992_DSENSE_MAX_THRESH(channel); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_set_current(st, reg, channel, val); |
| } |
| |
| static int ltc2992_write_gpios_in(struct device *dev, u32 attr, int nr_gpio, long val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_in_min: |
| reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh; |
| break; |
| case hwmon_in_max: |
| reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_set_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val); |
| } |
| |
| static int ltc2992_write_in(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| if (channel > 1) |
| return ltc2992_write_gpios_in(dev, attr, channel - 2, val); |
| |
| switch (attr) { |
| case hwmon_in_min: |
| reg = LTC2992_SENSE_MIN_THRESH(channel); |
| break; |
| case hwmon_in_max: |
| reg = LTC2992_SENSE_MAX_THRESH(channel); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_set_voltage(st, reg, LTC2992_VADC_UV_LSB, val); |
| } |
| |
| static int ltc2992_write_power(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| u32 reg; |
| |
| switch (attr) { |
| case hwmon_power_min: |
| reg = LTC2992_POWER_MIN_THRESH(channel); |
| break; |
| case hwmon_power_max: |
| reg = LTC2992_POWER_MAX_THRESH(channel); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return ltc2992_set_power(st, reg, channel, val); |
| } |
| |
| static int ltc2992_write_chip(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct ltc2992_state *st = dev_get_drvdata(dev); |
| |
| switch (attr) { |
| case hwmon_chip_in_reset_history: |
| return regmap_update_bits(st->regmap, LTC2992_CTRLB, LTC2992_RESET_HISTORY, |
| LTC2992_RESET_HISTORY); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int ltc2992_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, |
| long val) |
| { |
| switch (type) { |
| case hwmon_chip: |
| return ltc2992_write_chip(dev, attr, channel, val); |
| case hwmon_in: |
| return ltc2992_write_in(dev, attr, channel, val); |
| case hwmon_curr: |
| return ltc2992_write_curr(dev, attr, channel, val); |
| case hwmon_power: |
| return ltc2992_write_power(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static const struct hwmon_ops ltc2992_hwmon_ops = { |
| .is_visible = ltc2992_is_visible, |
| .read = ltc2992_read, |
| .write = ltc2992_write, |
| }; |
| |
| static const u32 ltc2992_chip_config[] = { |
| HWMON_C_IN_RESET_HISTORY, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ltc2992_chip = { |
| .type = hwmon_chip, |
| .config = ltc2992_chip_config, |
| }; |
| |
| static const u32 ltc2992_in_config[] = { |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN | HWMON_I_MAX | |
| HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ltc2992_in = { |
| .type = hwmon_in, |
| .config = ltc2992_in_config, |
| }; |
| |
| static const u32 ltc2992_curr_config[] = { |
| HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN | HWMON_C_MAX | |
| HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM, |
| HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN | HWMON_C_MAX | |
| HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ltc2992_curr = { |
| .type = hwmon_curr, |
| .config = ltc2992_curr_config, |
| }; |
| |
| static const u32 ltc2992_power_config[] = { |
| HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST | HWMON_P_MIN | HWMON_P_MAX | |
| HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM, |
| HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST | HWMON_P_MIN | HWMON_P_MAX | |
| HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ltc2992_power = { |
| .type = hwmon_power, |
| .config = ltc2992_power_config, |
| }; |
| |
| static const struct hwmon_channel_info *ltc2992_info[] = { |
| <c2992_chip, |
| <c2992_in, |
| <c2992_curr, |
| <c2992_power, |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info ltc2992_chip_info = { |
| .ops = <c2992_hwmon_ops, |
| .info = ltc2992_info, |
| }; |
| |
| static const struct regmap_config ltc2992_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0xE8, |
| }; |
| |
| static int ltc2992_parse_dt(struct ltc2992_state *st) |
| { |
| struct fwnode_handle *fwnode; |
| struct fwnode_handle *child; |
| u32 addr; |
| u32 val; |
| int ret; |
| |
| fwnode = dev_fwnode(&st->client->dev); |
| |
| fwnode_for_each_available_child_node(fwnode, child) { |
| ret = fwnode_property_read_u32(child, "reg", &addr); |
| if (ret < 0) |
| return ret; |
| |
| if (addr > 1) |
| return -EINVAL; |
| |
| ret = fwnode_property_read_u32(child, "shunt-resistor-micro-ohms", &val); |
| if (!ret) |
| st->r_sense_uohm[addr] = val; |
| } |
| |
| return 0; |
| } |
| |
| static int ltc2992_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| { |
| struct device *hwmon_dev; |
| struct ltc2992_state *st; |
| int ret; |
| |
| st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL); |
| if (!st) |
| return -ENOMEM; |
| |
| st->client = client; |
| st->regmap = devm_regmap_init_i2c(client, <c2992_regmap_config); |
| if (IS_ERR(st->regmap)) |
| return PTR_ERR(st->regmap); |
| |
| ret = ltc2992_parse_dt(st); |
| if (ret < 0) |
| return ret; |
| |
| ret = ltc2992_config_gpio(st); |
| if (ret < 0) |
| return ret; |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, client->name, st, |
| <c2992_chip_info, NULL); |
| |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct of_device_id ltc2992_of_match[] = { |
| { .compatible = "adi,ltc2992" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ltc2992_of_match); |
| |
| static const struct i2c_device_id ltc2992_i2c_id[] = { |
| {"ltc2992", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc2992_i2c_id); |
| |
| static struct i2c_driver ltc2992_i2c_driver = { |
| .driver = { |
| .name = "ltc2992", |
| .of_match_table = ltc2992_of_match, |
| }, |
| .probe = ltc2992_i2c_probe, |
| .id_table = ltc2992_i2c_id, |
| }; |
| |
| module_i2c_driver(ltc2992_i2c_driver); |
| |
| MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>"); |
| MODULE_DESCRIPTION("Hwmon driver for Linear Technology 2992"); |
| MODULE_LICENSE("Dual BSD/GPL"); |