| /* |
| * Generic ring buffer |
| * |
| * Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com> |
| */ |
| #include <linux/ring_buffer.h> |
| #include <linux/ftrace_irq.h> |
| #include <linux/spinlock.h> |
| #include <linux/debugfs.h> |
| #include <linux/uaccess.h> |
| #include <linux/hardirq.h> |
| #include <linux/module.h> |
| #include <linux/percpu.h> |
| #include <linux/mutex.h> |
| #include <linux/sched.h> /* used for sched_clock() (for now) */ |
| #include <linux/init.h> |
| #include <linux/hash.h> |
| #include <linux/list.h> |
| #include <linux/fs.h> |
| |
| #include "trace.h" |
| |
| /* |
| * A fast way to enable or disable all ring buffers is to |
| * call tracing_on or tracing_off. Turning off the ring buffers |
| * prevents all ring buffers from being recorded to. |
| * Turning this switch on, makes it OK to write to the |
| * ring buffer, if the ring buffer is enabled itself. |
| * |
| * There's three layers that must be on in order to write |
| * to the ring buffer. |
| * |
| * 1) This global flag must be set. |
| * 2) The ring buffer must be enabled for recording. |
| * 3) The per cpu buffer must be enabled for recording. |
| * |
| * In case of an anomaly, this global flag has a bit set that |
| * will permantly disable all ring buffers. |
| */ |
| |
| /* |
| * Global flag to disable all recording to ring buffers |
| * This has two bits: ON, DISABLED |
| * |
| * ON DISABLED |
| * ---- ---------- |
| * 0 0 : ring buffers are off |
| * 1 0 : ring buffers are on |
| * X 1 : ring buffers are permanently disabled |
| */ |
| |
| enum { |
| RB_BUFFERS_ON_BIT = 0, |
| RB_BUFFERS_DISABLED_BIT = 1, |
| }; |
| |
| enum { |
| RB_BUFFERS_ON = 1 << RB_BUFFERS_ON_BIT, |
| RB_BUFFERS_DISABLED = 1 << RB_BUFFERS_DISABLED_BIT, |
| }; |
| |
| static unsigned long ring_buffer_flags __read_mostly = RB_BUFFERS_ON; |
| |
| /** |
| * tracing_on - enable all tracing buffers |
| * |
| * This function enables all tracing buffers that may have been |
| * disabled with tracing_off. |
| */ |
| void tracing_on(void) |
| { |
| set_bit(RB_BUFFERS_ON_BIT, &ring_buffer_flags); |
| } |
| EXPORT_SYMBOL_GPL(tracing_on); |
| |
| /** |
| * tracing_off - turn off all tracing buffers |
| * |
| * This function stops all tracing buffers from recording data. |
| * It does not disable any overhead the tracers themselves may |
| * be causing. This function simply causes all recording to |
| * the ring buffers to fail. |
| */ |
| void tracing_off(void) |
| { |
| clear_bit(RB_BUFFERS_ON_BIT, &ring_buffer_flags); |
| } |
| EXPORT_SYMBOL_GPL(tracing_off); |
| |
| /** |
| * tracing_off_permanent - permanently disable ring buffers |
| * |
| * This function, once called, will disable all ring buffers |
| * permanently. |
| */ |
| void tracing_off_permanent(void) |
| { |
| set_bit(RB_BUFFERS_DISABLED_BIT, &ring_buffer_flags); |
| } |
| |
| #include "trace.h" |
| |
| /* Up this if you want to test the TIME_EXTENTS and normalization */ |
| #define DEBUG_SHIFT 0 |
| |
| /* FIXME!!! */ |
| u64 ring_buffer_time_stamp(int cpu) |
| { |
| u64 time; |
| |
| preempt_disable_notrace(); |
| /* shift to debug/test normalization and TIME_EXTENTS */ |
| time = sched_clock() << DEBUG_SHIFT; |
| preempt_enable_no_resched_notrace(); |
| |
| return time; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_time_stamp); |
| |
| void ring_buffer_normalize_time_stamp(int cpu, u64 *ts) |
| { |
| /* Just stupid testing the normalize function and deltas */ |
| *ts >>= DEBUG_SHIFT; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_normalize_time_stamp); |
| |
| #define RB_EVNT_HDR_SIZE (sizeof(struct ring_buffer_event)) |
| #define RB_ALIGNMENT 4U |
| #define RB_MAX_SMALL_DATA 28 |
| |
| enum { |
| RB_LEN_TIME_EXTEND = 8, |
| RB_LEN_TIME_STAMP = 16, |
| }; |
| |
| /* inline for ring buffer fast paths */ |
| static unsigned |
| rb_event_length(struct ring_buffer_event *event) |
| { |
| unsigned length; |
| |
| switch (event->type) { |
| case RINGBUF_TYPE_PADDING: |
| /* undefined */ |
| return -1; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| return RB_LEN_TIME_EXTEND; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| return RB_LEN_TIME_STAMP; |
| |
| case RINGBUF_TYPE_DATA: |
| if (event->len) |
| length = event->len * RB_ALIGNMENT; |
| else |
| length = event->array[0]; |
| return length + RB_EVNT_HDR_SIZE; |
| default: |
| BUG(); |
| } |
| /* not hit */ |
| return 0; |
| } |
| |
| /** |
| * ring_buffer_event_length - return the length of the event |
| * @event: the event to get the length of |
| */ |
| unsigned ring_buffer_event_length(struct ring_buffer_event *event) |
| { |
| unsigned length = rb_event_length(event); |
| if (event->type != RINGBUF_TYPE_DATA) |
| return length; |
| length -= RB_EVNT_HDR_SIZE; |
| if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0])) |
| length -= sizeof(event->array[0]); |
| return length; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_event_length); |
| |
| /* inline for ring buffer fast paths */ |
| static void * |
| rb_event_data(struct ring_buffer_event *event) |
| { |
| BUG_ON(event->type != RINGBUF_TYPE_DATA); |
| /* If length is in len field, then array[0] has the data */ |
| if (event->len) |
| return (void *)&event->array[0]; |
| /* Otherwise length is in array[0] and array[1] has the data */ |
| return (void *)&event->array[1]; |
| } |
| |
| /** |
| * ring_buffer_event_data - return the data of the event |
| * @event: the event to get the data from |
| */ |
| void *ring_buffer_event_data(struct ring_buffer_event *event) |
| { |
| return rb_event_data(event); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_event_data); |
| |
| #define for_each_buffer_cpu(buffer, cpu) \ |
| for_each_cpu(cpu, buffer->cpumask) |
| |
| #define TS_SHIFT 27 |
| #define TS_MASK ((1ULL << TS_SHIFT) - 1) |
| #define TS_DELTA_TEST (~TS_MASK) |
| |
| struct buffer_data_page { |
| u64 time_stamp; /* page time stamp */ |
| local_t commit; /* write committed index */ |
| unsigned char data[]; /* data of buffer page */ |
| }; |
| |
| struct buffer_page { |
| local_t write; /* index for next write */ |
| unsigned read; /* index for next read */ |
| struct list_head list; /* list of free pages */ |
| struct buffer_data_page *page; /* Actual data page */ |
| }; |
| |
| static void rb_init_page(struct buffer_data_page *bpage) |
| { |
| local_set(&bpage->commit, 0); |
| } |
| |
| /* |
| * Also stolen from mm/slob.c. Thanks to Mathieu Desnoyers for pointing |
| * this issue out. |
| */ |
| static void free_buffer_page(struct buffer_page *bpage) |
| { |
| free_page((unsigned long)bpage->page); |
| kfree(bpage); |
| } |
| |
| /* |
| * We need to fit the time_stamp delta into 27 bits. |
| */ |
| static inline int test_time_stamp(u64 delta) |
| { |
| if (delta & TS_DELTA_TEST) |
| return 1; |
| return 0; |
| } |
| |
| #define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data)) |
| |
| /* |
| * head_page == tail_page && head == tail then buffer is empty. |
| */ |
| struct ring_buffer_per_cpu { |
| int cpu; |
| struct ring_buffer *buffer; |
| spinlock_t reader_lock; /* serialize readers */ |
| raw_spinlock_t lock; |
| struct lock_class_key lock_key; |
| struct list_head pages; |
| struct buffer_page *head_page; /* read from head */ |
| struct buffer_page *tail_page; /* write to tail */ |
| struct buffer_page *commit_page; /* committed pages */ |
| struct buffer_page *reader_page; |
| unsigned long overrun; |
| unsigned long entries; |
| u64 write_stamp; |
| u64 read_stamp; |
| atomic_t record_disabled; |
| }; |
| |
| struct ring_buffer { |
| unsigned pages; |
| unsigned flags; |
| int cpus; |
| cpumask_var_t cpumask; |
| atomic_t record_disabled; |
| |
| struct mutex mutex; |
| |
| struct ring_buffer_per_cpu **buffers; |
| }; |
| |
| struct ring_buffer_iter { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| unsigned long head; |
| struct buffer_page *head_page; |
| u64 read_stamp; |
| }; |
| |
| /* buffer may be either ring_buffer or ring_buffer_per_cpu */ |
| #define RB_WARN_ON(buffer, cond) \ |
| ({ \ |
| int _____ret = unlikely(cond); \ |
| if (_____ret) { \ |
| atomic_inc(&buffer->record_disabled); \ |
| WARN_ON(1); \ |
| } \ |
| _____ret; \ |
| }) |
| |
| /** |
| * check_pages - integrity check of buffer pages |
| * @cpu_buffer: CPU buffer with pages to test |
| * |
| * As a safety measure we check to make sure the data pages have not |
| * been corrupted. |
| */ |
| static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct list_head *head = &cpu_buffer->pages; |
| struct buffer_page *bpage, *tmp; |
| |
| if (RB_WARN_ON(cpu_buffer, head->next->prev != head)) |
| return -1; |
| if (RB_WARN_ON(cpu_buffer, head->prev->next != head)) |
| return -1; |
| |
| list_for_each_entry_safe(bpage, tmp, head, list) { |
| if (RB_WARN_ON(cpu_buffer, |
| bpage->list.next->prev != &bpage->list)) |
| return -1; |
| if (RB_WARN_ON(cpu_buffer, |
| bpage->list.prev->next != &bpage->list)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer, |
| unsigned nr_pages) |
| { |
| struct list_head *head = &cpu_buffer->pages; |
| struct buffer_page *bpage, *tmp; |
| unsigned long addr; |
| LIST_HEAD(pages); |
| unsigned i; |
| |
| for (i = 0; i < nr_pages; i++) { |
| bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()), |
| GFP_KERNEL, cpu_to_node(cpu_buffer->cpu)); |
| if (!bpage) |
| goto free_pages; |
| list_add(&bpage->list, &pages); |
| |
| addr = __get_free_page(GFP_KERNEL); |
| if (!addr) |
| goto free_pages; |
| bpage->page = (void *)addr; |
| rb_init_page(bpage->page); |
| } |
| |
| list_splice(&pages, head); |
| |
| rb_check_pages(cpu_buffer); |
| |
| return 0; |
| |
| free_pages: |
| list_for_each_entry_safe(bpage, tmp, &pages, list) { |
| list_del_init(&bpage->list); |
| free_buffer_page(bpage); |
| } |
| return -ENOMEM; |
| } |
| |
| static struct ring_buffer_per_cpu * |
| rb_allocate_cpu_buffer(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct buffer_page *bpage; |
| unsigned long addr; |
| int ret; |
| |
| cpu_buffer = kzalloc_node(ALIGN(sizeof(*cpu_buffer), cache_line_size()), |
| GFP_KERNEL, cpu_to_node(cpu)); |
| if (!cpu_buffer) |
| return NULL; |
| |
| cpu_buffer->cpu = cpu; |
| cpu_buffer->buffer = buffer; |
| spin_lock_init(&cpu_buffer->reader_lock); |
| cpu_buffer->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; |
| INIT_LIST_HEAD(&cpu_buffer->pages); |
| |
| bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()), |
| GFP_KERNEL, cpu_to_node(cpu)); |
| if (!bpage) |
| goto fail_free_buffer; |
| |
| cpu_buffer->reader_page = bpage; |
| addr = __get_free_page(GFP_KERNEL); |
| if (!addr) |
| goto fail_free_reader; |
| bpage->page = (void *)addr; |
| rb_init_page(bpage->page); |
| |
| INIT_LIST_HEAD(&cpu_buffer->reader_page->list); |
| |
| ret = rb_allocate_pages(cpu_buffer, buffer->pages); |
| if (ret < 0) |
| goto fail_free_reader; |
| |
| cpu_buffer->head_page |
| = list_entry(cpu_buffer->pages.next, struct buffer_page, list); |
| cpu_buffer->tail_page = cpu_buffer->commit_page = cpu_buffer->head_page; |
| |
| return cpu_buffer; |
| |
| fail_free_reader: |
| free_buffer_page(cpu_buffer->reader_page); |
| |
| fail_free_buffer: |
| kfree(cpu_buffer); |
| return NULL; |
| } |
| |
| static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct list_head *head = &cpu_buffer->pages; |
| struct buffer_page *bpage, *tmp; |
| |
| list_del_init(&cpu_buffer->reader_page->list); |
| free_buffer_page(cpu_buffer->reader_page); |
| |
| list_for_each_entry_safe(bpage, tmp, head, list) { |
| list_del_init(&bpage->list); |
| free_buffer_page(bpage); |
| } |
| kfree(cpu_buffer); |
| } |
| |
| /* |
| * Causes compile errors if the struct buffer_page gets bigger |
| * than the struct page. |
| */ |
| extern int ring_buffer_page_too_big(void); |
| |
| /** |
| * ring_buffer_alloc - allocate a new ring_buffer |
| * @size: the size in bytes per cpu that is needed. |
| * @flags: attributes to set for the ring buffer. |
| * |
| * Currently the only flag that is available is the RB_FL_OVERWRITE |
| * flag. This flag means that the buffer will overwrite old data |
| * when the buffer wraps. If this flag is not set, the buffer will |
| * drop data when the tail hits the head. |
| */ |
| struct ring_buffer *ring_buffer_alloc(unsigned long size, unsigned flags) |
| { |
| struct ring_buffer *buffer; |
| int bsize; |
| int cpu; |
| |
| /* Paranoid! Optimizes out when all is well */ |
| if (sizeof(struct buffer_page) > sizeof(struct page)) |
| ring_buffer_page_too_big(); |
| |
| |
| /* keep it in its own cache line */ |
| buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()), |
| GFP_KERNEL); |
| if (!buffer) |
| return NULL; |
| |
| if (!alloc_cpumask_var(&buffer->cpumask, GFP_KERNEL)) |
| goto fail_free_buffer; |
| |
| buffer->pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE); |
| buffer->flags = flags; |
| |
| /* need at least two pages */ |
| if (buffer->pages == 1) |
| buffer->pages++; |
| |
| cpumask_copy(buffer->cpumask, cpu_possible_mask); |
| buffer->cpus = nr_cpu_ids; |
| |
| bsize = sizeof(void *) * nr_cpu_ids; |
| buffer->buffers = kzalloc(ALIGN(bsize, cache_line_size()), |
| GFP_KERNEL); |
| if (!buffer->buffers) |
| goto fail_free_cpumask; |
| |
| for_each_buffer_cpu(buffer, cpu) { |
| buffer->buffers[cpu] = |
| rb_allocate_cpu_buffer(buffer, cpu); |
| if (!buffer->buffers[cpu]) |
| goto fail_free_buffers; |
| } |
| |
| mutex_init(&buffer->mutex); |
| |
| return buffer; |
| |
| fail_free_buffers: |
| for_each_buffer_cpu(buffer, cpu) { |
| if (buffer->buffers[cpu]) |
| rb_free_cpu_buffer(buffer->buffers[cpu]); |
| } |
| kfree(buffer->buffers); |
| |
| fail_free_cpumask: |
| free_cpumask_var(buffer->cpumask); |
| |
| fail_free_buffer: |
| kfree(buffer); |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_alloc); |
| |
| /** |
| * ring_buffer_free - free a ring buffer. |
| * @buffer: the buffer to free. |
| */ |
| void |
| ring_buffer_free(struct ring_buffer *buffer) |
| { |
| int cpu; |
| |
| for_each_buffer_cpu(buffer, cpu) |
| rb_free_cpu_buffer(buffer->buffers[cpu]); |
| |
| free_cpumask_var(buffer->cpumask); |
| |
| kfree(buffer); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_free); |
| |
| static void rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer); |
| |
| static void |
| rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) |
| { |
| struct buffer_page *bpage; |
| struct list_head *p; |
| unsigned i; |
| |
| atomic_inc(&cpu_buffer->record_disabled); |
| synchronize_sched(); |
| |
| for (i = 0; i < nr_pages; i++) { |
| if (RB_WARN_ON(cpu_buffer, list_empty(&cpu_buffer->pages))) |
| return; |
| p = cpu_buffer->pages.next; |
| bpage = list_entry(p, struct buffer_page, list); |
| list_del_init(&bpage->list); |
| free_buffer_page(bpage); |
| } |
| if (RB_WARN_ON(cpu_buffer, list_empty(&cpu_buffer->pages))) |
| return; |
| |
| rb_reset_cpu(cpu_buffer); |
| |
| rb_check_pages(cpu_buffer); |
| |
| atomic_dec(&cpu_buffer->record_disabled); |
| |
| } |
| |
| static void |
| rb_insert_pages(struct ring_buffer_per_cpu *cpu_buffer, |
| struct list_head *pages, unsigned nr_pages) |
| { |
| struct buffer_page *bpage; |
| struct list_head *p; |
| unsigned i; |
| |
| atomic_inc(&cpu_buffer->record_disabled); |
| synchronize_sched(); |
| |
| for (i = 0; i < nr_pages; i++) { |
| if (RB_WARN_ON(cpu_buffer, list_empty(pages))) |
| return; |
| p = pages->next; |
| bpage = list_entry(p, struct buffer_page, list); |
| list_del_init(&bpage->list); |
| list_add_tail(&bpage->list, &cpu_buffer->pages); |
| } |
| rb_reset_cpu(cpu_buffer); |
| |
| rb_check_pages(cpu_buffer); |
| |
| atomic_dec(&cpu_buffer->record_disabled); |
| } |
| |
| /** |
| * ring_buffer_resize - resize the ring buffer |
| * @buffer: the buffer to resize. |
| * @size: the new size. |
| * |
| * The tracer is responsible for making sure that the buffer is |
| * not being used while changing the size. |
| * Note: We may be able to change the above requirement by using |
| * RCU synchronizations. |
| * |
| * Minimum size is 2 * BUF_PAGE_SIZE. |
| * |
| * Returns -1 on failure. |
| */ |
| int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| unsigned nr_pages, rm_pages, new_pages; |
| struct buffer_page *bpage, *tmp; |
| unsigned long buffer_size; |
| unsigned long addr; |
| LIST_HEAD(pages); |
| int i, cpu; |
| |
| /* |
| * Always succeed at resizing a non-existent buffer: |
| */ |
| if (!buffer) |
| return size; |
| |
| size = DIV_ROUND_UP(size, BUF_PAGE_SIZE); |
| size *= BUF_PAGE_SIZE; |
| buffer_size = buffer->pages * BUF_PAGE_SIZE; |
| |
| /* we need a minimum of two pages */ |
| if (size < BUF_PAGE_SIZE * 2) |
| size = BUF_PAGE_SIZE * 2; |
| |
| if (size == buffer_size) |
| return size; |
| |
| mutex_lock(&buffer->mutex); |
| |
| nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE); |
| |
| if (size < buffer_size) { |
| |
| /* easy case, just free pages */ |
| if (RB_WARN_ON(buffer, nr_pages >= buffer->pages)) { |
| mutex_unlock(&buffer->mutex); |
| return -1; |
| } |
| |
| rm_pages = buffer->pages - nr_pages; |
| |
| for_each_buffer_cpu(buffer, cpu) { |
| cpu_buffer = buffer->buffers[cpu]; |
| rb_remove_pages(cpu_buffer, rm_pages); |
| } |
| goto out; |
| } |
| |
| /* |
| * This is a bit more difficult. We only want to add pages |
| * when we can allocate enough for all CPUs. We do this |
| * by allocating all the pages and storing them on a local |
| * link list. If we succeed in our allocation, then we |
| * add these pages to the cpu_buffers. Otherwise we just free |
| * them all and return -ENOMEM; |
| */ |
| if (RB_WARN_ON(buffer, nr_pages <= buffer->pages)) { |
| mutex_unlock(&buffer->mutex); |
| return -1; |
| } |
| |
| new_pages = nr_pages - buffer->pages; |
| |
| for_each_buffer_cpu(buffer, cpu) { |
| for (i = 0; i < new_pages; i++) { |
| bpage = kzalloc_node(ALIGN(sizeof(*bpage), |
| cache_line_size()), |
| GFP_KERNEL, cpu_to_node(cpu)); |
| if (!bpage) |
| goto free_pages; |
| list_add(&bpage->list, &pages); |
| addr = __get_free_page(GFP_KERNEL); |
| if (!addr) |
| goto free_pages; |
| bpage->page = (void *)addr; |
| rb_init_page(bpage->page); |
| } |
| } |
| |
| for_each_buffer_cpu(buffer, cpu) { |
| cpu_buffer = buffer->buffers[cpu]; |
| rb_insert_pages(cpu_buffer, &pages, new_pages); |
| } |
| |
| if (RB_WARN_ON(buffer, !list_empty(&pages))) { |
| mutex_unlock(&buffer->mutex); |
| return -1; |
| } |
| |
| out: |
| buffer->pages = nr_pages; |
| mutex_unlock(&buffer->mutex); |
| |
| return size; |
| |
| free_pages: |
| list_for_each_entry_safe(bpage, tmp, &pages, list) { |
| list_del_init(&bpage->list); |
| free_buffer_page(bpage); |
| } |
| mutex_unlock(&buffer->mutex); |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_resize); |
| |
| static inline int rb_null_event(struct ring_buffer_event *event) |
| { |
| return event->type == RINGBUF_TYPE_PADDING; |
| } |
| |
| static inline void * |
| __rb_data_page_index(struct buffer_data_page *bpage, unsigned index) |
| { |
| return bpage->data + index; |
| } |
| |
| static inline void *__rb_page_index(struct buffer_page *bpage, unsigned index) |
| { |
| return bpage->page->data + index; |
| } |
| |
| static inline struct ring_buffer_event * |
| rb_reader_event(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| return __rb_page_index(cpu_buffer->reader_page, |
| cpu_buffer->reader_page->read); |
| } |
| |
| static inline struct ring_buffer_event * |
| rb_head_event(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| return __rb_page_index(cpu_buffer->head_page, |
| cpu_buffer->head_page->read); |
| } |
| |
| static inline struct ring_buffer_event * |
| rb_iter_head_event(struct ring_buffer_iter *iter) |
| { |
| return __rb_page_index(iter->head_page, iter->head); |
| } |
| |
| static inline unsigned rb_page_write(struct buffer_page *bpage) |
| { |
| return local_read(&bpage->write); |
| } |
| |
| static inline unsigned rb_page_commit(struct buffer_page *bpage) |
| { |
| return local_read(&bpage->page->commit); |
| } |
| |
| /* Size is determined by what has been commited */ |
| static inline unsigned rb_page_size(struct buffer_page *bpage) |
| { |
| return rb_page_commit(bpage); |
| } |
| |
| static inline unsigned |
| rb_commit_index(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| return rb_page_commit(cpu_buffer->commit_page); |
| } |
| |
| static inline unsigned rb_head_size(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| return rb_page_commit(cpu_buffer->head_page); |
| } |
| |
| /* |
| * When the tail hits the head and the buffer is in overwrite mode, |
| * the head jumps to the next page and all content on the previous |
| * page is discarded. But before doing so, we update the overrun |
| * variable of the buffer. |
| */ |
| static void rb_update_overflow(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct ring_buffer_event *event; |
| unsigned long head; |
| |
| for (head = 0; head < rb_head_size(cpu_buffer); |
| head += rb_event_length(event)) { |
| |
| event = __rb_page_index(cpu_buffer->head_page, head); |
| if (RB_WARN_ON(cpu_buffer, rb_null_event(event))) |
| return; |
| /* Only count data entries */ |
| if (event->type != RINGBUF_TYPE_DATA) |
| continue; |
| cpu_buffer->overrun++; |
| cpu_buffer->entries--; |
| } |
| } |
| |
| static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer, |
| struct buffer_page **bpage) |
| { |
| struct list_head *p = (*bpage)->list.next; |
| |
| if (p == &cpu_buffer->pages) |
| p = p->next; |
| |
| *bpage = list_entry(p, struct buffer_page, list); |
| } |
| |
| static inline unsigned |
| rb_event_index(struct ring_buffer_event *event) |
| { |
| unsigned long addr = (unsigned long)event; |
| |
| return (addr & ~PAGE_MASK) - (PAGE_SIZE - BUF_PAGE_SIZE); |
| } |
| |
| static int |
| rb_is_commit(struct ring_buffer_per_cpu *cpu_buffer, |
| struct ring_buffer_event *event) |
| { |
| unsigned long addr = (unsigned long)event; |
| unsigned long index; |
| |
| index = rb_event_index(event); |
| addr &= PAGE_MASK; |
| |
| return cpu_buffer->commit_page->page == (void *)addr && |
| rb_commit_index(cpu_buffer) == index; |
| } |
| |
| static void |
| rb_set_commit_event(struct ring_buffer_per_cpu *cpu_buffer, |
| struct ring_buffer_event *event) |
| { |
| unsigned long addr = (unsigned long)event; |
| unsigned long index; |
| |
| index = rb_event_index(event); |
| addr &= PAGE_MASK; |
| |
| while (cpu_buffer->commit_page->page != (void *)addr) { |
| if (RB_WARN_ON(cpu_buffer, |
| cpu_buffer->commit_page == cpu_buffer->tail_page)) |
| return; |
| cpu_buffer->commit_page->page->commit = |
| cpu_buffer->commit_page->write; |
| rb_inc_page(cpu_buffer, &cpu_buffer->commit_page); |
| cpu_buffer->write_stamp = |
| cpu_buffer->commit_page->page->time_stamp; |
| } |
| |
| /* Now set the commit to the event's index */ |
| local_set(&cpu_buffer->commit_page->page->commit, index); |
| } |
| |
| static void |
| rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| /* |
| * We only race with interrupts and NMIs on this CPU. |
| * If we own the commit event, then we can commit |
| * all others that interrupted us, since the interruptions |
| * are in stack format (they finish before they come |
| * back to us). This allows us to do a simple loop to |
| * assign the commit to the tail. |
| */ |
| again: |
| while (cpu_buffer->commit_page != cpu_buffer->tail_page) { |
| cpu_buffer->commit_page->page->commit = |
| cpu_buffer->commit_page->write; |
| rb_inc_page(cpu_buffer, &cpu_buffer->commit_page); |
| cpu_buffer->write_stamp = |
| cpu_buffer->commit_page->page->time_stamp; |
| /* add barrier to keep gcc from optimizing too much */ |
| barrier(); |
| } |
| while (rb_commit_index(cpu_buffer) != |
| rb_page_write(cpu_buffer->commit_page)) { |
| cpu_buffer->commit_page->page->commit = |
| cpu_buffer->commit_page->write; |
| barrier(); |
| } |
| |
| /* again, keep gcc from optimizing */ |
| barrier(); |
| |
| /* |
| * If an interrupt came in just after the first while loop |
| * and pushed the tail page forward, we will be left with |
| * a dangling commit that will never go forward. |
| */ |
| if (unlikely(cpu_buffer->commit_page != cpu_buffer->tail_page)) |
| goto again; |
| } |
| |
| static void rb_reset_reader_page(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| cpu_buffer->read_stamp = cpu_buffer->reader_page->page->time_stamp; |
| cpu_buffer->reader_page->read = 0; |
| } |
| |
| static void rb_inc_iter(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| |
| /* |
| * The iterator could be on the reader page (it starts there). |
| * But the head could have moved, since the reader was |
| * found. Check for this case and assign the iterator |
| * to the head page instead of next. |
| */ |
| if (iter->head_page == cpu_buffer->reader_page) |
| iter->head_page = cpu_buffer->head_page; |
| else |
| rb_inc_page(cpu_buffer, &iter->head_page); |
| |
| iter->read_stamp = iter->head_page->page->time_stamp; |
| iter->head = 0; |
| } |
| |
| /** |
| * ring_buffer_update_event - update event type and data |
| * @event: the even to update |
| * @type: the type of event |
| * @length: the size of the event field in the ring buffer |
| * |
| * Update the type and data fields of the event. The length |
| * is the actual size that is written to the ring buffer, |
| * and with this, we can determine what to place into the |
| * data field. |
| */ |
| static void |
| rb_update_event(struct ring_buffer_event *event, |
| unsigned type, unsigned length) |
| { |
| event->type = type; |
| |
| switch (type) { |
| |
| case RINGBUF_TYPE_PADDING: |
| break; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| event->len = DIV_ROUND_UP(RB_LEN_TIME_EXTEND, RB_ALIGNMENT); |
| break; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| event->len = DIV_ROUND_UP(RB_LEN_TIME_STAMP, RB_ALIGNMENT); |
| break; |
| |
| case RINGBUF_TYPE_DATA: |
| length -= RB_EVNT_HDR_SIZE; |
| if (length > RB_MAX_SMALL_DATA) { |
| event->len = 0; |
| event->array[0] = length; |
| } else |
| event->len = DIV_ROUND_UP(length, RB_ALIGNMENT); |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| static unsigned rb_calculate_event_length(unsigned length) |
| { |
| struct ring_buffer_event event; /* Used only for sizeof array */ |
| |
| /* zero length can cause confusions */ |
| if (!length) |
| length = 1; |
| |
| if (length > RB_MAX_SMALL_DATA) |
| length += sizeof(event.array[0]); |
| |
| length += RB_EVNT_HDR_SIZE; |
| length = ALIGN(length, RB_ALIGNMENT); |
| |
| return length; |
| } |
| |
| static struct ring_buffer_event * |
| __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, |
| unsigned type, unsigned long length, u64 *ts) |
| { |
| struct buffer_page *tail_page, *head_page, *reader_page, *commit_page; |
| unsigned long tail, write; |
| struct ring_buffer *buffer = cpu_buffer->buffer; |
| struct ring_buffer_event *event; |
| unsigned long flags; |
| bool lock_taken = false; |
| |
| commit_page = cpu_buffer->commit_page; |
| /* we just need to protect against interrupts */ |
| barrier(); |
| tail_page = cpu_buffer->tail_page; |
| write = local_add_return(length, &tail_page->write); |
| tail = write - length; |
| |
| /* See if we shot pass the end of this buffer page */ |
| if (write > BUF_PAGE_SIZE) { |
| struct buffer_page *next_page = tail_page; |
| |
| local_irq_save(flags); |
| /* |
| * Since the write to the buffer is still not |
| * fully lockless, we must be careful with NMIs. |
| * The locks in the writers are taken when a write |
| * crosses to a new page. The locks protect against |
| * races with the readers (this will soon be fixed |
| * with a lockless solution). |
| * |
| * Because we can not protect against NMIs, and we |
| * want to keep traces reentrant, we need to manage |
| * what happens when we are in an NMI. |
| * |
| * NMIs can happen after we take the lock. |
| * If we are in an NMI, only take the lock |
| * if it is not already taken. Otherwise |
| * simply fail. |
| */ |
| if (unlikely(in_nmi())) { |
| if (!__raw_spin_trylock(&cpu_buffer->lock)) |
| goto out_unlock; |
| } else |
| __raw_spin_lock(&cpu_buffer->lock); |
| |
| lock_taken = true; |
| |
| rb_inc_page(cpu_buffer, &next_page); |
| |
| head_page = cpu_buffer->head_page; |
| reader_page = cpu_buffer->reader_page; |
| |
| /* we grabbed the lock before incrementing */ |
| if (RB_WARN_ON(cpu_buffer, next_page == reader_page)) |
| goto out_unlock; |
| |
| /* |
| * If for some reason, we had an interrupt storm that made |
| * it all the way around the buffer, bail, and warn |
| * about it. |
| */ |
| if (unlikely(next_page == commit_page)) { |
| WARN_ON_ONCE(1); |
| goto out_unlock; |
| } |
| |
| if (next_page == head_page) { |
| if (!(buffer->flags & RB_FL_OVERWRITE)) |
| goto out_unlock; |
| |
| /* tail_page has not moved yet? */ |
| if (tail_page == cpu_buffer->tail_page) { |
| /* count overflows */ |
| rb_update_overflow(cpu_buffer); |
| |
| rb_inc_page(cpu_buffer, &head_page); |
| cpu_buffer->head_page = head_page; |
| cpu_buffer->head_page->read = 0; |
| } |
| } |
| |
| /* |
| * If the tail page is still the same as what we think |
| * it is, then it is up to us to update the tail |
| * pointer. |
| */ |
| if (tail_page == cpu_buffer->tail_page) { |
| local_set(&next_page->write, 0); |
| local_set(&next_page->page->commit, 0); |
| cpu_buffer->tail_page = next_page; |
| |
| /* reread the time stamp */ |
| *ts = ring_buffer_time_stamp(cpu_buffer->cpu); |
| cpu_buffer->tail_page->page->time_stamp = *ts; |
| } |
| |
| /* |
| * The actual tail page has moved forward. |
| */ |
| if (tail < BUF_PAGE_SIZE) { |
| /* Mark the rest of the page with padding */ |
| event = __rb_page_index(tail_page, tail); |
| event->type = RINGBUF_TYPE_PADDING; |
| } |
| |
| if (tail <= BUF_PAGE_SIZE) |
| /* Set the write back to the previous setting */ |
| local_set(&tail_page->write, tail); |
| |
| /* |
| * If this was a commit entry that failed, |
| * increment that too |
| */ |
| if (tail_page == cpu_buffer->commit_page && |
| tail == rb_commit_index(cpu_buffer)) { |
| rb_set_commit_to_write(cpu_buffer); |
| } |
| |
| __raw_spin_unlock(&cpu_buffer->lock); |
| local_irq_restore(flags); |
| |
| /* fail and let the caller try again */ |
| return ERR_PTR(-EAGAIN); |
| } |
| |
| /* We reserved something on the buffer */ |
| |
| if (RB_WARN_ON(cpu_buffer, write > BUF_PAGE_SIZE)) |
| return NULL; |
| |
| event = __rb_page_index(tail_page, tail); |
| rb_update_event(event, type, length); |
| |
| /* |
| * If this is a commit and the tail is zero, then update |
| * this page's time stamp. |
| */ |
| if (!tail && rb_is_commit(cpu_buffer, event)) |
| cpu_buffer->commit_page->page->time_stamp = *ts; |
| |
| return event; |
| |
| out_unlock: |
| /* reset write */ |
| if (tail <= BUF_PAGE_SIZE) |
| local_set(&tail_page->write, tail); |
| |
| if (likely(lock_taken)) |
| __raw_spin_unlock(&cpu_buffer->lock); |
| local_irq_restore(flags); |
| return NULL; |
| } |
| |
| static int |
| rb_add_time_stamp(struct ring_buffer_per_cpu *cpu_buffer, |
| u64 *ts, u64 *delta) |
| { |
| struct ring_buffer_event *event; |
| static int once; |
| int ret; |
| |
| if (unlikely(*delta > (1ULL << 59) && !once++)) { |
| printk(KERN_WARNING "Delta way too big! %llu" |
| " ts=%llu write stamp = %llu\n", |
| (unsigned long long)*delta, |
| (unsigned long long)*ts, |
| (unsigned long long)cpu_buffer->write_stamp); |
| WARN_ON(1); |
| } |
| |
| /* |
| * The delta is too big, we to add a |
| * new timestamp. |
| */ |
| event = __rb_reserve_next(cpu_buffer, |
| RINGBUF_TYPE_TIME_EXTEND, |
| RB_LEN_TIME_EXTEND, |
| ts); |
| if (!event) |
| return -EBUSY; |
| |
| if (PTR_ERR(event) == -EAGAIN) |
| return -EAGAIN; |
| |
| /* Only a commited time event can update the write stamp */ |
| if (rb_is_commit(cpu_buffer, event)) { |
| /* |
| * If this is the first on the page, then we need to |
| * update the page itself, and just put in a zero. |
| */ |
| if (rb_event_index(event)) { |
| event->time_delta = *delta & TS_MASK; |
| event->array[0] = *delta >> TS_SHIFT; |
| } else { |
| cpu_buffer->commit_page->page->time_stamp = *ts; |
| event->time_delta = 0; |
| event->array[0] = 0; |
| } |
| cpu_buffer->write_stamp = *ts; |
| /* let the caller know this was the commit */ |
| ret = 1; |
| } else { |
| /* Darn, this is just wasted space */ |
| event->time_delta = 0; |
| event->array[0] = 0; |
| ret = 0; |
| } |
| |
| *delta = 0; |
| |
| return ret; |
| } |
| |
| static struct ring_buffer_event * |
| rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer, |
| unsigned type, unsigned long length) |
| { |
| struct ring_buffer_event *event; |
| u64 ts, delta; |
| int commit = 0; |
| int nr_loops = 0; |
| |
| again: |
| /* |
| * We allow for interrupts to reenter here and do a trace. |
| * If one does, it will cause this original code to loop |
| * back here. Even with heavy interrupts happening, this |
| * should only happen a few times in a row. If this happens |
| * 1000 times in a row, there must be either an interrupt |
| * storm or we have something buggy. |
| * Bail! |
| */ |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000)) |
| return NULL; |
| |
| ts = ring_buffer_time_stamp(cpu_buffer->cpu); |
| |
| /* |
| * Only the first commit can update the timestamp. |
| * Yes there is a race here. If an interrupt comes in |
| * just after the conditional and it traces too, then it |
| * will also check the deltas. More than one timestamp may |
| * also be made. But only the entry that did the actual |
| * commit will be something other than zero. |
| */ |
| if (cpu_buffer->tail_page == cpu_buffer->commit_page && |
| rb_page_write(cpu_buffer->tail_page) == |
| rb_commit_index(cpu_buffer)) { |
| |
| delta = ts - cpu_buffer->write_stamp; |
| |
| /* make sure this delta is calculated here */ |
| barrier(); |
| |
| /* Did the write stamp get updated already? */ |
| if (unlikely(ts < cpu_buffer->write_stamp)) |
| delta = 0; |
| |
| if (test_time_stamp(delta)) { |
| |
| commit = rb_add_time_stamp(cpu_buffer, &ts, &delta); |
| |
| if (commit == -EBUSY) |
| return NULL; |
| |
| if (commit == -EAGAIN) |
| goto again; |
| |
| RB_WARN_ON(cpu_buffer, commit < 0); |
| } |
| } else |
| /* Non commits have zero deltas */ |
| delta = 0; |
| |
| event = __rb_reserve_next(cpu_buffer, type, length, &ts); |
| if (PTR_ERR(event) == -EAGAIN) |
| goto again; |
| |
| if (!event) { |
| if (unlikely(commit)) |
| /* |
| * Ouch! We needed a timestamp and it was commited. But |
| * we didn't get our event reserved. |
| */ |
| rb_set_commit_to_write(cpu_buffer); |
| return NULL; |
| } |
| |
| /* |
| * If the timestamp was commited, make the commit our entry |
| * now so that we will update it when needed. |
| */ |
| if (commit) |
| rb_set_commit_event(cpu_buffer, event); |
| else if (!rb_is_commit(cpu_buffer, event)) |
| delta = 0; |
| |
| event->time_delta = delta; |
| |
| return event; |
| } |
| |
| static DEFINE_PER_CPU(int, rb_need_resched); |
| |
| /** |
| * ring_buffer_lock_reserve - reserve a part of the buffer |
| * @buffer: the ring buffer to reserve from |
| * @length: the length of the data to reserve (excluding event header) |
| * |
| * Returns a reseverd event on the ring buffer to copy directly to. |
| * The user of this interface will need to get the body to write into |
| * and can use the ring_buffer_event_data() interface. |
| * |
| * The length is the length of the data needed, not the event length |
| * which also includes the event header. |
| * |
| * Must be paired with ring_buffer_unlock_commit, unless NULL is returned. |
| * If NULL is returned, then nothing has been allocated or locked. |
| */ |
| struct ring_buffer_event * |
| ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_event *event; |
| int cpu, resched; |
| |
| if (ring_buffer_flags != RB_BUFFERS_ON) |
| return NULL; |
| |
| if (atomic_read(&buffer->record_disabled)) |
| return NULL; |
| |
| /* If we are tracing schedule, we don't want to recurse */ |
| resched = ftrace_preempt_disable(); |
| |
| cpu = raw_smp_processor_id(); |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| goto out; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| |
| if (atomic_read(&cpu_buffer->record_disabled)) |
| goto out; |
| |
| length = rb_calculate_event_length(length); |
| if (length > BUF_PAGE_SIZE) |
| goto out; |
| |
| event = rb_reserve_next_event(cpu_buffer, RINGBUF_TYPE_DATA, length); |
| if (!event) |
| goto out; |
| |
| /* |
| * Need to store resched state on this cpu. |
| * Only the first needs to. |
| */ |
| |
| if (preempt_count() == 1) |
| per_cpu(rb_need_resched, cpu) = resched; |
| |
| return event; |
| |
| out: |
| ftrace_preempt_enable(resched); |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve); |
| |
| static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer, |
| struct ring_buffer_event *event) |
| { |
| cpu_buffer->entries++; |
| |
| /* Only process further if we own the commit */ |
| if (!rb_is_commit(cpu_buffer, event)) |
| return; |
| |
| cpu_buffer->write_stamp += event->time_delta; |
| |
| rb_set_commit_to_write(cpu_buffer); |
| } |
| |
| /** |
| * ring_buffer_unlock_commit - commit a reserved |
| * @buffer: The buffer to commit to |
| * @event: The event pointer to commit. |
| * |
| * This commits the data to the ring buffer, and releases any locks held. |
| * |
| * Must be paired with ring_buffer_lock_reserve. |
| */ |
| int ring_buffer_unlock_commit(struct ring_buffer *buffer, |
| struct ring_buffer_event *event) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| int cpu = raw_smp_processor_id(); |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| |
| rb_commit(cpu_buffer, event); |
| |
| /* |
| * Only the last preempt count needs to restore preemption. |
| */ |
| if (preempt_count() == 1) |
| ftrace_preempt_enable(per_cpu(rb_need_resched, cpu)); |
| else |
| preempt_enable_no_resched_notrace(); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit); |
| |
| /** |
| * ring_buffer_write - write data to the buffer without reserving |
| * @buffer: The ring buffer to write to. |
| * @length: The length of the data being written (excluding the event header) |
| * @data: The data to write to the buffer. |
| * |
| * This is like ring_buffer_lock_reserve and ring_buffer_unlock_commit as |
| * one function. If you already have the data to write to the buffer, it |
| * may be easier to simply call this function. |
| * |
| * Note, like ring_buffer_lock_reserve, the length is the length of the data |
| * and not the length of the event which would hold the header. |
| */ |
| int ring_buffer_write(struct ring_buffer *buffer, |
| unsigned long length, |
| void *data) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_event *event; |
| unsigned long event_length; |
| void *body; |
| int ret = -EBUSY; |
| int cpu, resched; |
| |
| if (ring_buffer_flags != RB_BUFFERS_ON) |
| return -EBUSY; |
| |
| if (atomic_read(&buffer->record_disabled)) |
| return -EBUSY; |
| |
| resched = ftrace_preempt_disable(); |
| |
| cpu = raw_smp_processor_id(); |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| goto out; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| |
| if (atomic_read(&cpu_buffer->record_disabled)) |
| goto out; |
| |
| event_length = rb_calculate_event_length(length); |
| event = rb_reserve_next_event(cpu_buffer, |
| RINGBUF_TYPE_DATA, event_length); |
| if (!event) |
| goto out; |
| |
| body = rb_event_data(event); |
| |
| memcpy(body, data, length); |
| |
| rb_commit(cpu_buffer, event); |
| |
| ret = 0; |
| out: |
| ftrace_preempt_enable(resched); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_write); |
| |
| static int rb_per_cpu_empty(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct buffer_page *reader = cpu_buffer->reader_page; |
| struct buffer_page *head = cpu_buffer->head_page; |
| struct buffer_page *commit = cpu_buffer->commit_page; |
| |
| return reader->read == rb_page_commit(reader) && |
| (commit == reader || |
| (commit == head && |
| head->read == rb_page_commit(commit))); |
| } |
| |
| /** |
| * ring_buffer_record_disable - stop all writes into the buffer |
| * @buffer: The ring buffer to stop writes to. |
| * |
| * This prevents all writes to the buffer. Any attempt to write |
| * to the buffer after this will fail and return NULL. |
| * |
| * The caller should call synchronize_sched() after this. |
| */ |
| void ring_buffer_record_disable(struct ring_buffer *buffer) |
| { |
| atomic_inc(&buffer->record_disabled); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_record_disable); |
| |
| /** |
| * ring_buffer_record_enable - enable writes to the buffer |
| * @buffer: The ring buffer to enable writes |
| * |
| * Note, multiple disables will need the same number of enables |
| * to truely enable the writing (much like preempt_disable). |
| */ |
| void ring_buffer_record_enable(struct ring_buffer *buffer) |
| { |
| atomic_dec(&buffer->record_disabled); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_record_enable); |
| |
| /** |
| * ring_buffer_record_disable_cpu - stop all writes into the cpu_buffer |
| * @buffer: The ring buffer to stop writes to. |
| * @cpu: The CPU buffer to stop |
| * |
| * This prevents all writes to the buffer. Any attempt to write |
| * to the buffer after this will fail and return NULL. |
| * |
| * The caller should call synchronize_sched() after this. |
| */ |
| void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| atomic_inc(&cpu_buffer->record_disabled); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_record_disable_cpu); |
| |
| /** |
| * ring_buffer_record_enable_cpu - enable writes to the buffer |
| * @buffer: The ring buffer to enable writes |
| * @cpu: The CPU to enable. |
| * |
| * Note, multiple disables will need the same number of enables |
| * to truely enable the writing (much like preempt_disable). |
| */ |
| void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| atomic_dec(&cpu_buffer->record_disabled); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_record_enable_cpu); |
| |
| /** |
| * ring_buffer_entries_cpu - get the number of entries in a cpu buffer |
| * @buffer: The ring buffer |
| * @cpu: The per CPU buffer to get the entries from. |
| */ |
| unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return 0; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| return cpu_buffer->entries; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_entries_cpu); |
| |
| /** |
| * ring_buffer_overrun_cpu - get the number of overruns in a cpu_buffer |
| * @buffer: The ring buffer |
| * @cpu: The per CPU buffer to get the number of overruns from |
| */ |
| unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return 0; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| return cpu_buffer->overrun; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu); |
| |
| /** |
| * ring_buffer_entries - get the number of entries in a buffer |
| * @buffer: The ring buffer |
| * |
| * Returns the total number of entries in the ring buffer |
| * (all CPU entries) |
| */ |
| unsigned long ring_buffer_entries(struct ring_buffer *buffer) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| unsigned long entries = 0; |
| int cpu; |
| |
| /* if you care about this being correct, lock the buffer */ |
| for_each_buffer_cpu(buffer, cpu) { |
| cpu_buffer = buffer->buffers[cpu]; |
| entries += cpu_buffer->entries; |
| } |
| |
| return entries; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_entries); |
| |
| /** |
| * ring_buffer_overrun_cpu - get the number of overruns in buffer |
| * @buffer: The ring buffer |
| * |
| * Returns the total number of overruns in the ring buffer |
| * (all CPU entries) |
| */ |
| unsigned long ring_buffer_overruns(struct ring_buffer *buffer) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| unsigned long overruns = 0; |
| int cpu; |
| |
| /* if you care about this being correct, lock the buffer */ |
| for_each_buffer_cpu(buffer, cpu) { |
| cpu_buffer = buffer->buffers[cpu]; |
| overruns += cpu_buffer->overrun; |
| } |
| |
| return overruns; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_overruns); |
| |
| static void rb_iter_reset(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| |
| /* Iterator usage is expected to have record disabled */ |
| if (list_empty(&cpu_buffer->reader_page->list)) { |
| iter->head_page = cpu_buffer->head_page; |
| iter->head = cpu_buffer->head_page->read; |
| } else { |
| iter->head_page = cpu_buffer->reader_page; |
| iter->head = cpu_buffer->reader_page->read; |
| } |
| if (iter->head) |
| iter->read_stamp = cpu_buffer->read_stamp; |
| else |
| iter->read_stamp = iter->head_page->page->time_stamp; |
| } |
| |
| /** |
| * ring_buffer_iter_reset - reset an iterator |
| * @iter: The iterator to reset |
| * |
| * Resets the iterator, so that it will start from the beginning |
| * again. |
| */ |
| void ring_buffer_iter_reset(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| rb_iter_reset(iter); |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_reset); |
| |
| /** |
| * ring_buffer_iter_empty - check if an iterator has no more to read |
| * @iter: The iterator to check |
| */ |
| int ring_buffer_iter_empty(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| cpu_buffer = iter->cpu_buffer; |
| |
| return iter->head_page == cpu_buffer->commit_page && |
| iter->head == rb_commit_index(cpu_buffer); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_empty); |
| |
| static void |
| rb_update_read_stamp(struct ring_buffer_per_cpu *cpu_buffer, |
| struct ring_buffer_event *event) |
| { |
| u64 delta; |
| |
| switch (event->type) { |
| case RINGBUF_TYPE_PADDING: |
| return; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| delta = event->array[0]; |
| delta <<= TS_SHIFT; |
| delta += event->time_delta; |
| cpu_buffer->read_stamp += delta; |
| return; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| /* FIXME: not implemented */ |
| return; |
| |
| case RINGBUF_TYPE_DATA: |
| cpu_buffer->read_stamp += event->time_delta; |
| return; |
| |
| default: |
| BUG(); |
| } |
| return; |
| } |
| |
| static void |
| rb_update_iter_read_stamp(struct ring_buffer_iter *iter, |
| struct ring_buffer_event *event) |
| { |
| u64 delta; |
| |
| switch (event->type) { |
| case RINGBUF_TYPE_PADDING: |
| return; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| delta = event->array[0]; |
| delta <<= TS_SHIFT; |
| delta += event->time_delta; |
| iter->read_stamp += delta; |
| return; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| /* FIXME: not implemented */ |
| return; |
| |
| case RINGBUF_TYPE_DATA: |
| iter->read_stamp += event->time_delta; |
| return; |
| |
| default: |
| BUG(); |
| } |
| return; |
| } |
| |
| static struct buffer_page * |
| rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct buffer_page *reader = NULL; |
| unsigned long flags; |
| int nr_loops = 0; |
| |
| local_irq_save(flags); |
| __raw_spin_lock(&cpu_buffer->lock); |
| |
| again: |
| /* |
| * This should normally only loop twice. But because the |
| * start of the reader inserts an empty page, it causes |
| * a case where we will loop three times. There should be no |
| * reason to loop four times (that I know of). |
| */ |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3)) { |
| reader = NULL; |
| goto out; |
| } |
| |
| reader = cpu_buffer->reader_page; |
| |
| /* If there's more to read, return this page */ |
| if (cpu_buffer->reader_page->read < rb_page_size(reader)) |
| goto out; |
| |
| /* Never should we have an index greater than the size */ |
| if (RB_WARN_ON(cpu_buffer, |
| cpu_buffer->reader_page->read > rb_page_size(reader))) |
| goto out; |
| |
| /* check if we caught up to the tail */ |
| reader = NULL; |
| if (cpu_buffer->commit_page == cpu_buffer->reader_page) |
| goto out; |
| |
| /* |
| * Splice the empty reader page into the list around the head. |
| * Reset the reader page to size zero. |
| */ |
| |
| reader = cpu_buffer->head_page; |
| cpu_buffer->reader_page->list.next = reader->list.next; |
| cpu_buffer->reader_page->list.prev = reader->list.prev; |
| |
| local_set(&cpu_buffer->reader_page->write, 0); |
| local_set(&cpu_buffer->reader_page->page->commit, 0); |
| |
| /* Make the reader page now replace the head */ |
| reader->list.prev->next = &cpu_buffer->reader_page->list; |
| reader->list.next->prev = &cpu_buffer->reader_page->list; |
| |
| /* |
| * If the tail is on the reader, then we must set the head |
| * to the inserted page, otherwise we set it one before. |
| */ |
| cpu_buffer->head_page = cpu_buffer->reader_page; |
| |
| if (cpu_buffer->commit_page != reader) |
| rb_inc_page(cpu_buffer, &cpu_buffer->head_page); |
| |
| /* Finally update the reader page to the new head */ |
| cpu_buffer->reader_page = reader; |
| rb_reset_reader_page(cpu_buffer); |
| |
| goto again; |
| |
| out: |
| __raw_spin_unlock(&cpu_buffer->lock); |
| local_irq_restore(flags); |
| |
| return reader; |
| } |
| |
| static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| struct ring_buffer_event *event; |
| struct buffer_page *reader; |
| unsigned length; |
| |
| reader = rb_get_reader_page(cpu_buffer); |
| |
| /* This function should not be called when buffer is empty */ |
| if (RB_WARN_ON(cpu_buffer, !reader)) |
| return; |
| |
| event = rb_reader_event(cpu_buffer); |
| |
| if (event->type == RINGBUF_TYPE_DATA) |
| cpu_buffer->entries--; |
| |
| rb_update_read_stamp(cpu_buffer, event); |
| |
| length = rb_event_length(event); |
| cpu_buffer->reader_page->read += length; |
| } |
| |
| static void rb_advance_iter(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer *buffer; |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_event *event; |
| unsigned length; |
| |
| cpu_buffer = iter->cpu_buffer; |
| buffer = cpu_buffer->buffer; |
| |
| /* |
| * Check if we are at the end of the buffer. |
| */ |
| if (iter->head >= rb_page_size(iter->head_page)) { |
| if (RB_WARN_ON(buffer, |
| iter->head_page == cpu_buffer->commit_page)) |
| return; |
| rb_inc_iter(iter); |
| return; |
| } |
| |
| event = rb_iter_head_event(iter); |
| |
| length = rb_event_length(event); |
| |
| /* |
| * This should not be called to advance the header if we are |
| * at the tail of the buffer. |
| */ |
| if (RB_WARN_ON(cpu_buffer, |
| (iter->head_page == cpu_buffer->commit_page) && |
| (iter->head + length > rb_commit_index(cpu_buffer)))) |
| return; |
| |
| rb_update_iter_read_stamp(iter, event); |
| |
| iter->head += length; |
| |
| /* check for end of page padding */ |
| if ((iter->head >= rb_page_size(iter->head_page)) && |
| (iter->head_page != cpu_buffer->commit_page)) |
| rb_advance_iter(iter); |
| } |
| |
| static struct ring_buffer_event * |
| rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_event *event; |
| struct buffer_page *reader; |
| int nr_loops = 0; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return NULL; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| |
| again: |
| /* |
| * We repeat when a timestamp is encountered. It is possible |
| * to get multiple timestamps from an interrupt entering just |
| * as one timestamp is about to be written. The max times |
| * that this can happen is the number of nested interrupts we |
| * can have. Nesting 10 deep of interrupts is clearly |
| * an anomaly. |
| */ |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10)) |
| return NULL; |
| |
| reader = rb_get_reader_page(cpu_buffer); |
| if (!reader) |
| return NULL; |
| |
| event = rb_reader_event(cpu_buffer); |
| |
| switch (event->type) { |
| case RINGBUF_TYPE_PADDING: |
| RB_WARN_ON(cpu_buffer, 1); |
| rb_advance_reader(cpu_buffer); |
| return NULL; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| /* Internal data, OK to advance */ |
| rb_advance_reader(cpu_buffer); |
| goto again; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| /* FIXME: not implemented */ |
| rb_advance_reader(cpu_buffer); |
| goto again; |
| |
| case RINGBUF_TYPE_DATA: |
| if (ts) { |
| *ts = cpu_buffer->read_stamp + event->time_delta; |
| ring_buffer_normalize_time_stamp(cpu_buffer->cpu, ts); |
| } |
| return event; |
| |
| default: |
| BUG(); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_peek); |
| |
| static struct ring_buffer_event * |
| rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) |
| { |
| struct ring_buffer *buffer; |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_event *event; |
| int nr_loops = 0; |
| |
| if (ring_buffer_iter_empty(iter)) |
| return NULL; |
| |
| cpu_buffer = iter->cpu_buffer; |
| buffer = cpu_buffer->buffer; |
| |
| again: |
| /* |
| * We repeat when a timestamp is encountered. It is possible |
| * to get multiple timestamps from an interrupt entering just |
| * as one timestamp is about to be written. The max times |
| * that this can happen is the number of nested interrupts we |
| * can have. Nesting 10 deep of interrupts is clearly |
| * an anomaly. |
| */ |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10)) |
| return NULL; |
| |
| if (rb_per_cpu_empty(cpu_buffer)) |
| return NULL; |
| |
| event = rb_iter_head_event(iter); |
| |
| switch (event->type) { |
| case RINGBUF_TYPE_PADDING: |
| rb_inc_iter(iter); |
| goto again; |
| |
| case RINGBUF_TYPE_TIME_EXTEND: |
| /* Internal data, OK to advance */ |
| rb_advance_iter(iter); |
| goto again; |
| |
| case RINGBUF_TYPE_TIME_STAMP: |
| /* FIXME: not implemented */ |
| rb_advance_iter(iter); |
| goto again; |
| |
| case RINGBUF_TYPE_DATA: |
| if (ts) { |
| *ts = iter->read_stamp + event->time_delta; |
| ring_buffer_normalize_time_stamp(cpu_buffer->cpu, ts); |
| } |
| return event; |
| |
| default: |
| BUG(); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_peek); |
| |
| /** |
| * ring_buffer_peek - peek at the next event to be read |
| * @buffer: The ring buffer to read |
| * @cpu: The cpu to peak at |
| * @ts: The timestamp counter of this event. |
| * |
| * This will return the event that will be read next, but does |
| * not consume the data. |
| */ |
| struct ring_buffer_event * |
| ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; |
| struct ring_buffer_event *event; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| event = rb_buffer_peek(buffer, cpu, ts); |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return event; |
| } |
| |
| /** |
| * ring_buffer_iter_peek - peek at the next event to be read |
| * @iter: The ring buffer iterator |
| * @ts: The timestamp counter of this event. |
| * |
| * This will return the event that will be read next, but does |
| * not increment the iterator. |
| */ |
| struct ring_buffer_event * |
| ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| struct ring_buffer_event *event; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| event = rb_iter_peek(iter, ts); |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return event; |
| } |
| |
| /** |
| * ring_buffer_consume - return an event and consume it |
| * @buffer: The ring buffer to get the next event from |
| * |
| * Returns the next event in the ring buffer, and that event is consumed. |
| * Meaning, that sequential reads will keep returning a different event, |
| * and eventually empty the ring buffer if the producer is slower. |
| */ |
| struct ring_buffer_event * |
| ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; |
| struct ring_buffer_event *event; |
| unsigned long flags; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return NULL; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| |
| event = rb_buffer_peek(buffer, cpu, ts); |
| if (!event) |
| goto out; |
| |
| rb_advance_reader(cpu_buffer); |
| |
| out: |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return event; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_consume); |
| |
| /** |
| * ring_buffer_read_start - start a non consuming read of the buffer |
| * @buffer: The ring buffer to read from |
| * @cpu: The cpu buffer to iterate over |
| * |
| * This starts up an iteration through the buffer. It also disables |
| * the recording to the buffer until the reading is finished. |
| * This prevents the reading from being corrupted. This is not |
| * a consuming read, so a producer is not expected. |
| * |
| * Must be paired with ring_buffer_finish. |
| */ |
| struct ring_buffer_iter * |
| ring_buffer_read_start(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| struct ring_buffer_iter *iter; |
| unsigned long flags; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return NULL; |
| |
| iter = kmalloc(sizeof(*iter), GFP_KERNEL); |
| if (!iter) |
| return NULL; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| |
| iter->cpu_buffer = cpu_buffer; |
| |
| atomic_inc(&cpu_buffer->record_disabled); |
| synchronize_sched(); |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| __raw_spin_lock(&cpu_buffer->lock); |
| rb_iter_reset(iter); |
| __raw_spin_unlock(&cpu_buffer->lock); |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return iter; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_read_start); |
| |
| /** |
| * ring_buffer_finish - finish reading the iterator of the buffer |
| * @iter: The iterator retrieved by ring_buffer_start |
| * |
| * This re-enables the recording to the buffer, and frees the |
| * iterator. |
| */ |
| void |
| ring_buffer_read_finish(struct ring_buffer_iter *iter) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| |
| atomic_dec(&cpu_buffer->record_disabled); |
| kfree(iter); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_read_finish); |
| |
| /** |
| * ring_buffer_read - read the next item in the ring buffer by the iterator |
| * @iter: The ring buffer iterator |
| * @ts: The time stamp of the event read. |
| * |
| * This reads the next event in the ring buffer and increments the iterator. |
| */ |
| struct ring_buffer_event * |
| ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts) |
| { |
| struct ring_buffer_event *event; |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| event = rb_iter_peek(iter, ts); |
| if (!event) |
| goto out; |
| |
| rb_advance_iter(iter); |
| out: |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return event; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_read); |
| |
| /** |
| * ring_buffer_size - return the size of the ring buffer (in bytes) |
| * @buffer: The ring buffer. |
| */ |
| unsigned long ring_buffer_size(struct ring_buffer *buffer) |
| { |
| return BUF_PAGE_SIZE * buffer->pages; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_size); |
| |
| static void |
| rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer) |
| { |
| cpu_buffer->head_page |
| = list_entry(cpu_buffer->pages.next, struct buffer_page, list); |
| local_set(&cpu_buffer->head_page->write, 0); |
| local_set(&cpu_buffer->head_page->page->commit, 0); |
| |
| cpu_buffer->head_page->read = 0; |
| |
| cpu_buffer->tail_page = cpu_buffer->head_page; |
| cpu_buffer->commit_page = cpu_buffer->head_page; |
| |
| INIT_LIST_HEAD(&cpu_buffer->reader_page->list); |
| local_set(&cpu_buffer->reader_page->write, 0); |
| local_set(&cpu_buffer->reader_page->page->commit, 0); |
| cpu_buffer->reader_page->read = 0; |
| |
| cpu_buffer->overrun = 0; |
| cpu_buffer->entries = 0; |
| |
| cpu_buffer->write_stamp = 0; |
| cpu_buffer->read_stamp = 0; |
| } |
| |
| /** |
| * ring_buffer_reset_cpu - reset a ring buffer per CPU buffer |
| * @buffer: The ring buffer to reset a per cpu buffer of |
| * @cpu: The CPU buffer to be reset |
| */ |
| void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; |
| unsigned long flags; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| |
| __raw_spin_lock(&cpu_buffer->lock); |
| |
| rb_reset_cpu(cpu_buffer); |
| |
| __raw_spin_unlock(&cpu_buffer->lock); |
| |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu); |
| |
| /** |
| * ring_buffer_reset - reset a ring buffer |
| * @buffer: The ring buffer to reset all cpu buffers |
| */ |
| void ring_buffer_reset(struct ring_buffer *buffer) |
| { |
| int cpu; |
| |
| for_each_buffer_cpu(buffer, cpu) |
| ring_buffer_reset_cpu(buffer, cpu); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_reset); |
| |
| /** |
| * rind_buffer_empty - is the ring buffer empty? |
| * @buffer: The ring buffer to test |
| */ |
| int ring_buffer_empty(struct ring_buffer *buffer) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| int cpu; |
| |
| /* yes this is racy, but if you don't like the race, lock the buffer */ |
| for_each_buffer_cpu(buffer, cpu) { |
| cpu_buffer = buffer->buffers[cpu]; |
| if (!rb_per_cpu_empty(cpu_buffer)) |
| return 0; |
| } |
| return 1; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_empty); |
| |
| /** |
| * ring_buffer_empty_cpu - is a cpu buffer of a ring buffer empty? |
| * @buffer: The ring buffer |
| * @cpu: The CPU buffer to test |
| */ |
| int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer; |
| |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) |
| return 1; |
| |
| cpu_buffer = buffer->buffers[cpu]; |
| return rb_per_cpu_empty(cpu_buffer); |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_empty_cpu); |
| |
| /** |
| * ring_buffer_swap_cpu - swap a CPU buffer between two ring buffers |
| * @buffer_a: One buffer to swap with |
| * @buffer_b: The other buffer to swap with |
| * |
| * This function is useful for tracers that want to take a "snapshot" |
| * of a CPU buffer and has another back up buffer lying around. |
| * it is expected that the tracer handles the cpu buffer not being |
| * used at the moment. |
| */ |
| int ring_buffer_swap_cpu(struct ring_buffer *buffer_a, |
| struct ring_buffer *buffer_b, int cpu) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer_a; |
| struct ring_buffer_per_cpu *cpu_buffer_b; |
| |
| if (!cpumask_test_cpu(cpu, buffer_a->cpumask) || |
| !cpumask_test_cpu(cpu, buffer_b->cpumask)) |
| return -EINVAL; |
| |
| /* At least make sure the two buffers are somewhat the same */ |
| if (buffer_a->pages != buffer_b->pages) |
| return -EINVAL; |
| |
| if (ring_buffer_flags != RB_BUFFERS_ON) |
| return -EAGAIN; |
| |
| if (atomic_read(&buffer_a->record_disabled)) |
| return -EAGAIN; |
| |
| if (atomic_read(&buffer_b->record_disabled)) |
| return -EAGAIN; |
| |
| cpu_buffer_a = buffer_a->buffers[cpu]; |
| cpu_buffer_b = buffer_b->buffers[cpu]; |
| |
| if (atomic_read(&cpu_buffer_a->record_disabled)) |
| return -EAGAIN; |
| |
| if (atomic_read(&cpu_buffer_b->record_disabled)) |
| return -EAGAIN; |
| |
| /* |
| * We can't do a synchronize_sched here because this |
| * function can be called in atomic context. |
| * Normally this will be called from the same CPU as cpu. |
| * If not it's up to the caller to protect this. |
| */ |
| atomic_inc(&cpu_buffer_a->record_disabled); |
| atomic_inc(&cpu_buffer_b->record_disabled); |
| |
| buffer_a->buffers[cpu] = cpu_buffer_b; |
| buffer_b->buffers[cpu] = cpu_buffer_a; |
| |
| cpu_buffer_b->buffer = buffer_a; |
| cpu_buffer_a->buffer = buffer_b; |
| |
| atomic_dec(&cpu_buffer_a->record_disabled); |
| atomic_dec(&cpu_buffer_b->record_disabled); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu); |
| |
| static void rb_remove_entries(struct ring_buffer_per_cpu *cpu_buffer, |
| struct buffer_data_page *bpage, |
| unsigned int offset) |
| { |
| struct ring_buffer_event *event; |
| unsigned long head; |
| |
| __raw_spin_lock(&cpu_buffer->lock); |
| for (head = offset; head < local_read(&bpage->commit); |
| head += rb_event_length(event)) { |
| |
| event = __rb_data_page_index(bpage, head); |
| if (RB_WARN_ON(cpu_buffer, rb_null_event(event))) |
| return; |
| /* Only count data entries */ |
| if (event->type != RINGBUF_TYPE_DATA) |
| continue; |
| cpu_buffer->entries--; |
| } |
| __raw_spin_unlock(&cpu_buffer->lock); |
| } |
| |
| /** |
| * ring_buffer_alloc_read_page - allocate a page to read from buffer |
| * @buffer: the buffer to allocate for. |
| * |
| * This function is used in conjunction with ring_buffer_read_page. |
| * When reading a full page from the ring buffer, these functions |
| * can be used to speed up the process. The calling function should |
| * allocate a few pages first with this function. Then when it |
| * needs to get pages from the ring buffer, it passes the result |
| * of this function into ring_buffer_read_page, which will swap |
| * the page that was allocated, with the read page of the buffer. |
| * |
| * Returns: |
| * The page allocated, or NULL on error. |
| */ |
| void *ring_buffer_alloc_read_page(struct ring_buffer *buffer) |
| { |
| unsigned long addr; |
| struct buffer_data_page *bpage; |
| |
| addr = __get_free_page(GFP_KERNEL); |
| if (!addr) |
| return NULL; |
| |
| bpage = (void *)addr; |
| |
| return bpage; |
| } |
| |
| /** |
| * ring_buffer_free_read_page - free an allocated read page |
| * @buffer: the buffer the page was allocate for |
| * @data: the page to free |
| * |
| * Free a page allocated from ring_buffer_alloc_read_page. |
| */ |
| void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data) |
| { |
| free_page((unsigned long)data); |
| } |
| |
| /** |
| * ring_buffer_read_page - extract a page from the ring buffer |
| * @buffer: buffer to extract from |
| * @data_page: the page to use allocated from ring_buffer_alloc_read_page |
| * @cpu: the cpu of the buffer to extract |
| * @full: should the extraction only happen when the page is full. |
| * |
| * This function will pull out a page from the ring buffer and consume it. |
| * @data_page must be the address of the variable that was returned |
| * from ring_buffer_alloc_read_page. This is because the page might be used |
| * to swap with a page in the ring buffer. |
| * |
| * for example: |
| * rpage = ring_buffer_alloc_read_page(buffer); |
| * if (!rpage) |
| * return error; |
| * ret = ring_buffer_read_page(buffer, &rpage, cpu, 0); |
| * if (ret >= 0) |
| * process_page(rpage, ret); |
| * |
| * When @full is set, the function will not return true unless |
| * the writer is off the reader page. |
| * |
| * Note: it is up to the calling functions to handle sleeps and wakeups. |
| * The ring buffer can be used anywhere in the kernel and can not |
| * blindly call wake_up. The layer that uses the ring buffer must be |
| * responsible for that. |
| * |
| * Returns: |
| * >=0 if data has been transferred, returns the offset of consumed data. |
| * <0 if no data has been transferred. |
| */ |
| int ring_buffer_read_page(struct ring_buffer *buffer, |
| void **data_page, int cpu, int full) |
| { |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; |
| struct ring_buffer_event *event; |
| struct buffer_data_page *bpage; |
| unsigned long flags; |
| unsigned int read; |
| int ret = -1; |
| |
| if (!data_page) |
| return 0; |
| |
| bpage = *data_page; |
| if (!bpage) |
| return 0; |
| |
| spin_lock_irqsave(&cpu_buffer->reader_lock, flags); |
| |
| /* |
| * rb_buffer_peek will get the next ring buffer if |
| * the current reader page is empty. |
| */ |
| event = rb_buffer_peek(buffer, cpu, NULL); |
| if (!event) |
| goto out; |
| |
| /* check for data */ |
| if (!local_read(&cpu_buffer->reader_page->page->commit)) |
| goto out; |
| |
| read = cpu_buffer->reader_page->read; |
| /* |
| * If the writer is already off of the read page, then simply |
| * switch the read page with the given page. Otherwise |
| * we need to copy the data from the reader to the writer. |
| */ |
| if (cpu_buffer->reader_page == cpu_buffer->commit_page) { |
| unsigned int commit = rb_page_commit(cpu_buffer->reader_page); |
| struct buffer_data_page *rpage = cpu_buffer->reader_page->page; |
| |
| if (full) |
| goto out; |
| /* The writer is still on the reader page, we must copy */ |
| memcpy(bpage->data + read, rpage->data + read, commit - read); |
| |
| /* consume what was read */ |
| cpu_buffer->reader_page->read = commit; |
| |
| /* update bpage */ |
| local_set(&bpage->commit, commit); |
| if (!read) |
| bpage->time_stamp = rpage->time_stamp; |
| } else { |
| /* swap the pages */ |
| rb_init_page(bpage); |
| bpage = cpu_buffer->reader_page->page; |
| cpu_buffer->reader_page->page = *data_page; |
| cpu_buffer->reader_page->read = 0; |
| *data_page = bpage; |
| } |
| ret = read; |
| |
| /* update the entry counter */ |
| rb_remove_entries(cpu_buffer, bpage, read); |
| out: |
| spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); |
| |
| return ret; |
| } |
| |
| static ssize_t |
| rb_simple_read(struct file *filp, char __user *ubuf, |
| size_t cnt, loff_t *ppos) |
| { |
| unsigned long *p = filp->private_data; |
| char buf[64]; |
| int r; |
| |
| if (test_bit(RB_BUFFERS_DISABLED_BIT, p)) |
| r = sprintf(buf, "permanently disabled\n"); |
| else |
| r = sprintf(buf, "%d\n", test_bit(RB_BUFFERS_ON_BIT, p)); |
| |
| return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); |
| } |
| |
| static ssize_t |
| rb_simple_write(struct file *filp, const char __user *ubuf, |
| size_t cnt, loff_t *ppos) |
| { |
| unsigned long *p = filp->private_data; |
| char buf[64]; |
| unsigned long val; |
| int ret; |
| |
| if (cnt >= sizeof(buf)) |
| return -EINVAL; |
| |
| if (copy_from_user(&buf, ubuf, cnt)) |
| return -EFAULT; |
| |
| buf[cnt] = 0; |
| |
| ret = strict_strtoul(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| if (val) |
| set_bit(RB_BUFFERS_ON_BIT, p); |
| else |
| clear_bit(RB_BUFFERS_ON_BIT, p); |
| |
| (*ppos)++; |
| |
| return cnt; |
| } |
| |
| static struct file_operations rb_simple_fops = { |
| .open = tracing_open_generic, |
| .read = rb_simple_read, |
| .write = rb_simple_write, |
| }; |
| |
| |
| static __init int rb_init_debugfs(void) |
| { |
| struct dentry *d_tracer; |
| struct dentry *entry; |
| |
| d_tracer = tracing_init_dentry(); |
| |
| entry = debugfs_create_file("tracing_on", 0644, d_tracer, |
| &ring_buffer_flags, &rb_simple_fops); |
| if (!entry) |
| pr_warning("Could not create debugfs 'tracing_on' entry\n"); |
| |
| return 0; |
| } |
| |
| fs_initcall(rb_init_debugfs); |