| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // |
| |
| #include "ops.h" |
| #include "sof-priv.h" |
| #include "sof-audio.h" |
| |
| /* |
| * Helper function to determine the target DSP state during |
| * system suspend. This function only cares about the device |
| * D-states. Platform-specific substates, if any, should be |
| * handled by the platform-specific parts. |
| */ |
| static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev) |
| { |
| u32 target_dsp_state; |
| |
| switch (sdev->system_suspend_target) { |
| case SOF_SUSPEND_S3: |
| /* DSP should be in D3 if the system is suspending to S3 */ |
| target_dsp_state = SOF_DSP_PM_D3; |
| break; |
| case SOF_SUSPEND_S0IX: |
| /* |
| * Currently, the only criterion for retaining the DSP in D0 |
| * is that there are streams that ignored the suspend trigger. |
| * Additional criteria such Soundwire clock-stop mode and |
| * device suspend latency considerations will be added later. |
| */ |
| if (snd_sof_stream_suspend_ignored(sdev)) |
| target_dsp_state = SOF_DSP_PM_D0; |
| else |
| target_dsp_state = SOF_DSP_PM_D3; |
| break; |
| default: |
| /* This case would be during runtime suspend */ |
| target_dsp_state = SOF_DSP_PM_D3; |
| break; |
| } |
| |
| return target_dsp_state; |
| } |
| |
| static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd) |
| { |
| struct sof_ipc_pm_ctx pm_ctx; |
| struct sof_ipc_reply reply; |
| |
| memset(&pm_ctx, 0, sizeof(pm_ctx)); |
| |
| /* configure ctx save ipc message */ |
| pm_ctx.hdr.size = sizeof(pm_ctx); |
| pm_ctx.hdr.cmd = SOF_IPC_GLB_PM_MSG | cmd; |
| |
| /* send ctx save ipc to dsp */ |
| return sof_ipc_tx_message(sdev->ipc, pm_ctx.hdr.cmd, &pm_ctx, |
| sizeof(pm_ctx), &reply, sizeof(reply)); |
| } |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) |
| static void sof_cache_debugfs(struct snd_sof_dev *sdev) |
| { |
| struct snd_sof_dfsentry *dfse; |
| |
| list_for_each_entry(dfse, &sdev->dfsentry_list, list) { |
| |
| /* nothing to do if debugfs buffer is not IO mem */ |
| if (dfse->type == SOF_DFSENTRY_TYPE_BUF) |
| continue; |
| |
| /* cache memory that is only accessible in D0 */ |
| if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY) |
| memcpy_fromio(dfse->cache_buf, dfse->io_mem, |
| dfse->size); |
| } |
| } |
| #endif |
| |
| static int sof_resume(struct device *dev, bool runtime_resume) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| u32 old_state = sdev->dsp_power_state.state; |
| int ret; |
| |
| /* do nothing if dsp resume callbacks are not set */ |
| if (!runtime_resume && !sof_ops(sdev)->resume) |
| return 0; |
| |
| if (runtime_resume && !sof_ops(sdev)->runtime_resume) |
| return 0; |
| |
| /* DSP was never successfully started, nothing to resume */ |
| if (sdev->first_boot) |
| return 0; |
| |
| /* |
| * if the runtime_resume flag is set, call the runtime_resume routine |
| * or else call the system resume routine |
| */ |
| if (runtime_resume) |
| ret = snd_sof_dsp_runtime_resume(sdev); |
| else |
| ret = snd_sof_dsp_resume(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: failed to power up DSP after resume\n"); |
| return ret; |
| } |
| |
| /* |
| * Nothing further to be done for platforms that support the low power |
| * D0 substate. |
| */ |
| if (!runtime_resume && sof_ops(sdev)->set_power_state && |
| old_state == SOF_DSP_PM_D0) |
| return 0; |
| |
| sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE); |
| |
| /* load the firmware */ |
| ret = snd_sof_load_firmware(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: failed to load DSP firmware after resume %d\n", |
| ret); |
| return ret; |
| } |
| |
| sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS); |
| |
| /* |
| * Boot the firmware. The FW boot status will be modified |
| * in snd_sof_run_firmware() depending on the outcome. |
| */ |
| ret = snd_sof_run_firmware(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: failed to boot DSP firmware after resume %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* resume DMA trace, only need send ipc */ |
| ret = snd_sof_init_trace_ipc(sdev); |
| if (ret < 0) { |
| /* non fatal */ |
| dev_warn(sdev->dev, |
| "warning: failed to init trace after resume %d\n", |
| ret); |
| } |
| |
| /* restore pipelines */ |
| ret = sof_set_up_pipelines(sdev->dev, false); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: failed to restore pipeline after resume %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* notify DSP of system resume */ |
| ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_RESTORE); |
| if (ret < 0) |
| dev_err(sdev->dev, |
| "error: ctx_restore ipc error during resume %d\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int sof_suspend(struct device *dev, bool runtime_suspend) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| u32 target_state = 0; |
| int ret; |
| |
| /* do nothing if dsp suspend callback is not set */ |
| if (!runtime_suspend && !sof_ops(sdev)->suspend) |
| return 0; |
| |
| if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) |
| return 0; |
| |
| if (sdev->fw_state != SOF_FW_BOOT_COMPLETE) |
| goto suspend; |
| |
| /* prepare for streams to be resumed properly upon resume */ |
| if (!runtime_suspend) { |
| ret = sof_set_hw_params_upon_resume(sdev->dev); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: setting hw_params flag during suspend %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| target_state = snd_sof_dsp_power_target(sdev); |
| |
| /* Skip to platform-specific suspend if DSP is entering D0 */ |
| if (target_state == SOF_DSP_PM_D0) |
| goto suspend; |
| |
| sof_tear_down_pipelines(dev, false); |
| |
| /* release trace */ |
| snd_sof_release_trace(sdev); |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) |
| /* cache debugfs contents during runtime suspend */ |
| if (runtime_suspend) |
| sof_cache_debugfs(sdev); |
| #endif |
| /* notify DSP of upcoming power down */ |
| ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE); |
| if (ret == -EBUSY || ret == -EAGAIN) { |
| /* |
| * runtime PM has logic to handle -EBUSY/-EAGAIN so |
| * pass these errors up |
| */ |
| dev_err(sdev->dev, |
| "error: ctx_save ipc error during suspend %d\n", |
| ret); |
| return ret; |
| } else if (ret < 0) { |
| /* FW in unexpected state, continue to power down */ |
| dev_warn(sdev->dev, |
| "ctx_save ipc error %d, proceeding with suspend\n", |
| ret); |
| } |
| |
| suspend: |
| |
| /* return if the DSP was not probed successfully */ |
| if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED) |
| return 0; |
| |
| /* platform-specific suspend */ |
| if (runtime_suspend) |
| ret = snd_sof_dsp_runtime_suspend(sdev); |
| else |
| ret = snd_sof_dsp_suspend(sdev, target_state); |
| if (ret < 0) |
| dev_err(sdev->dev, |
| "error: failed to power down DSP during suspend %d\n", |
| ret); |
| |
| /* Do not reset FW state if DSP is in D0 */ |
| if (target_state == SOF_DSP_PM_D0) |
| return ret; |
| |
| /* reset FW state */ |
| sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); |
| sdev->enabled_cores_mask = 0; |
| |
| return ret; |
| } |
| |
| int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev) |
| { |
| /* Notify DSP of upcoming power down */ |
| if (sof_ops(sdev)->remove) |
| return sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE); |
| |
| return 0; |
| } |
| |
| int snd_sof_runtime_suspend(struct device *dev) |
| { |
| return sof_suspend(dev, true); |
| } |
| EXPORT_SYMBOL(snd_sof_runtime_suspend); |
| |
| int snd_sof_runtime_idle(struct device *dev) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| |
| return snd_sof_dsp_runtime_idle(sdev); |
| } |
| EXPORT_SYMBOL(snd_sof_runtime_idle); |
| |
| int snd_sof_runtime_resume(struct device *dev) |
| { |
| return sof_resume(dev, true); |
| } |
| EXPORT_SYMBOL(snd_sof_runtime_resume); |
| |
| int snd_sof_resume(struct device *dev) |
| { |
| return sof_resume(dev, false); |
| } |
| EXPORT_SYMBOL(snd_sof_resume); |
| |
| int snd_sof_suspend(struct device *dev) |
| { |
| return sof_suspend(dev, false); |
| } |
| EXPORT_SYMBOL(snd_sof_suspend); |
| |
| int snd_sof_prepare(struct device *dev) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| const struct sof_dev_desc *desc = sdev->pdata->desc; |
| |
| /* will suspend to S3 by default */ |
| sdev->system_suspend_target = SOF_SUSPEND_S3; |
| |
| if (!desc->use_acpi_target_states) |
| return 0; |
| |
| #if defined(CONFIG_ACPI) |
| if (acpi_target_system_state() == ACPI_STATE_S0) |
| sdev->system_suspend_target = SOF_SUSPEND_S0IX; |
| #endif |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_sof_prepare); |
| |
| void snd_sof_complete(struct device *dev) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| |
| sdev->system_suspend_target = SOF_SUSPEND_NONE; |
| } |
| EXPORT_SYMBOL(snd_sof_complete); |