| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Driver for Realtek PCI-Express card reader |
| * |
| * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * Author: |
| * Wei WANG <wei_wang@realsil.com.cn> |
| * Roger Tseng <rogerable@realtek.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/rtsx_pci.h> |
| |
| #include "rtsx_pcr.h" |
| |
| static u8 rts5227_get_ic_version(struct rtsx_pcr *pcr) |
| { |
| u8 val; |
| |
| rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val); |
| return val & 0x0F; |
| } |
| |
| static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| u8 driving_3v3[4][3] = { |
| {0x13, 0x13, 0x13}, |
| {0x96, 0x96, 0x96}, |
| {0x7F, 0x7F, 0x7F}, |
| {0x96, 0x96, 0x96}, |
| }; |
| u8 driving_1v8[4][3] = { |
| {0x99, 0x99, 0x99}, |
| {0xAA, 0xAA, 0xAA}, |
| {0xFE, 0xFE, 0xFE}, |
| {0xB3, 0xB3, 0xB3}, |
| }; |
| u8 (*driving)[3], drive_sel; |
| |
| if (voltage == OUTPUT_3V3) { |
| driving = driving_3v3; |
| drive_sel = pcr->sd30_drive_sel_3v3; |
| } else { |
| driving = driving_1v8; |
| drive_sel = pcr->sd30_drive_sel_1v8; |
| } |
| |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL, |
| 0xFF, driving[drive_sel][0]); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL, |
| 0xFF, driving[drive_sel][1]); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL, |
| 0xFF, driving[drive_sel][2]); |
| } |
| |
| static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr) |
| { |
| u32 reg; |
| |
| rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®); |
| pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg); |
| |
| if (!rtsx_vendor_setting_valid(reg)) |
| return; |
| |
| pcr->aspm_en = rtsx_reg_to_aspm(reg); |
| pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg); |
| pcr->card_drive_sel &= 0x3F; |
| pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg); |
| |
| rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®); |
| pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg); |
| pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg); |
| if (rtsx_reg_check_reverse_socket(reg)) |
| pcr->flags |= PCR_REVERSE_SOCKET; |
| } |
| |
| static void rts5227_force_power_down(struct rtsx_pcr *pcr, u8 pm_state) |
| { |
| /* Set relink_time to 0 */ |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0); |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0); |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0); |
| |
| if (pm_state == HOST_ENTER_S3) |
| rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x10); |
| |
| rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03); |
| } |
| |
| static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) |
| { |
| u16 cap; |
| |
| rtsx_pci_init_cmd(pcr); |
| |
| /* Configure GPIO as output */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02); |
| /* Reset ASPM state to default value */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0); |
| /* Switch LDO3318 source from DV33 to card_3v3 */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01); |
| /* LED shine disabled, set initial shine cycle period */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02); |
| /* Configure LTR */ |
| pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap); |
| if (cap & PCI_EXP_DEVCTL2_LTR_EN) |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3); |
| /* Configure OBFF */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03); |
| /* Configure driving */ |
| rts5227_fill_driving(pcr, OUTPUT_3V3); |
| /* Configure force_clock_req */ |
| if (pcr->flags & PCR_REVERSE_SOCKET) |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0xB8); |
| else |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0x88); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, pcr->reg_pm_ctrl3, 0x10, 0x00); |
| |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static int rts5227_optimize_phy(struct rtsx_pcr *pcr) |
| { |
| int err; |
| |
| err = rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00); |
| if (err < 0) |
| return err; |
| |
| /* Optimize RX sensitivity */ |
| return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); |
| } |
| |
| static int rts5227_turn_on_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02); |
| } |
| |
| static int rts5227_turn_off_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00); |
| } |
| |
| static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08); |
| } |
| |
| static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00); |
| } |
| |
| static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card) |
| { |
| int err; |
| |
| if (pcr->option.ocp_en) |
| rtsx_pci_enable_ocp(pcr); |
| |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, |
| SD_POWER_MASK, SD_PARTIAL_POWER_ON); |
| |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, |
| LDO3318_PWR_MASK, 0x02); |
| |
| err = rtsx_pci_send_cmd(pcr, 100); |
| if (err < 0) |
| return err; |
| |
| /* To avoid too large in-rush current */ |
| msleep(20); |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, |
| SD_POWER_MASK, SD_POWER_ON); |
| |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, |
| LDO3318_PWR_MASK, 0x06); |
| |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, |
| SD_OUTPUT_EN, SD_OUTPUT_EN); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, |
| MS_OUTPUT_EN, MS_OUTPUT_EN); |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card) |
| { |
| if (pcr->option.ocp_en) |
| rtsx_pci_disable_ocp(pcr); |
| |
| rtsx_pci_write_register(pcr, CARD_PWR_CTL, SD_POWER_MASK | |
| PMOS_STRG_MASK, SD_POWER_OFF | PMOS_STRG_400mA); |
| rtsx_pci_write_register(pcr, PWR_GATE_CTRL, LDO3318_PWR_MASK, 0X00); |
| |
| return 0; |
| } |
| |
| static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| int err; |
| |
| if (voltage == OUTPUT_3V3) { |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); |
| if (err < 0) |
| return err; |
| } else if (voltage == OUTPUT_1V8) { |
| err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02); |
| if (err < 0) |
| return err; |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24); |
| if (err < 0) |
| return err; |
| } else { |
| return -EINVAL; |
| } |
| |
| /* set pad drive */ |
| rtsx_pci_init_cmd(pcr); |
| rts5227_fill_driving(pcr, voltage); |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static const struct pcr_ops rts5227_pcr_ops = { |
| .fetch_vendor_settings = rts5227_fetch_vendor_settings, |
| .extra_init_hw = rts5227_extra_init_hw, |
| .optimize_phy = rts5227_optimize_phy, |
| .turn_on_led = rts5227_turn_on_led, |
| .turn_off_led = rts5227_turn_off_led, |
| .enable_auto_blink = rts5227_enable_auto_blink, |
| .disable_auto_blink = rts5227_disable_auto_blink, |
| .card_power_on = rts5227_card_power_on, |
| .card_power_off = rts5227_card_power_off, |
| .switch_output_voltage = rts5227_switch_output_voltage, |
| .cd_deglitch = NULL, |
| .conv_clk_and_div_n = NULL, |
| .force_power_down = rts5227_force_power_down, |
| }; |
| |
| /* SD Pull Control Enable: |
| * SD_DAT[3:0] ==> pull up |
| * SD_CD ==> pull up |
| * SD_WP ==> pull up |
| * SD_CMD ==> pull up |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5227_sd_pull_ctl_enable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9), |
| 0, |
| }; |
| |
| /* SD Pull Control Disable: |
| * SD_DAT[3:0] ==> pull down |
| * SD_CD ==> pull up |
| * SD_WP ==> pull down |
| * SD_CMD ==> pull down |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5227_sd_pull_ctl_disable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5), |
| 0, |
| }; |
| |
| /* MS Pull Control Enable: |
| * MS CD ==> pull up |
| * others ==> pull down |
| */ |
| static const u32 rts5227_ms_pull_ctl_enable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), |
| 0, |
| }; |
| |
| /* MS Pull Control Disable: |
| * MS CD ==> pull up |
| * others ==> pull down |
| */ |
| static const u32 rts5227_ms_pull_ctl_disable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), |
| 0, |
| }; |
| |
| void rts5227_init_params(struct rtsx_pcr *pcr) |
| { |
| pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; |
| pcr->num_slots = 2; |
| pcr->ops = &rts5227_pcr_ops; |
| |
| pcr->flags = 0; |
| pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT; |
| pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B; |
| pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B; |
| pcr->aspm_en = ASPM_L1_EN; |
| pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15); |
| pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7); |
| |
| pcr->ic_version = rts5227_get_ic_version(pcr); |
| pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl; |
| pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl; |
| pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl; |
| pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl; |
| |
| pcr->reg_pm_ctrl3 = PM_CTRL3; |
| } |
| |
| static int rts522a_optimize_phy(struct rtsx_pcr *pcr) |
| { |
| int err; |
| |
| err = rtsx_pci_write_register(pcr, RTS522A_PM_CTRL3, D3_DELINK_MODE_EN, |
| 0x00); |
| if (err < 0) |
| return err; |
| |
| if (is_version(pcr, 0x522A, IC_VER_A)) { |
| err = rtsx_pci_write_phy_register(pcr, PHY_RCR2, |
| PHY_RCR2_INIT_27S); |
| if (err) |
| return err; |
| |
| rtsx_pci_write_phy_register(pcr, PHY_RCR1, PHY_RCR1_INIT_27S); |
| rtsx_pci_write_phy_register(pcr, PHY_FLD0, PHY_FLD0_INIT_27S); |
| rtsx_pci_write_phy_register(pcr, PHY_FLD3, PHY_FLD3_INIT_27S); |
| rtsx_pci_write_phy_register(pcr, PHY_FLD4, PHY_FLD4_INIT_27S); |
| } |
| |
| return 0; |
| } |
| |
| static int rts522a_extra_init_hw(struct rtsx_pcr *pcr) |
| { |
| rts5227_extra_init_hw(pcr); |
| |
| rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, FUNC_FORCE_UPME_XMT_DBG, |
| FUNC_FORCE_UPME_XMT_DBG); |
| rtsx_pci_write_register(pcr, PCLK_CTL, 0x04, 0x04); |
| rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0); |
| rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 0xFF, 0x11); |
| |
| return 0; |
| } |
| |
| static int rts522a_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| int err; |
| |
| if (voltage == OUTPUT_3V3) { |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x57E4); |
| if (err < 0) |
| return err; |
| } else if (voltage == OUTPUT_1V8) { |
| err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02); |
| if (err < 0) |
| return err; |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x54A4); |
| if (err < 0) |
| return err; |
| } else { |
| return -EINVAL; |
| } |
| |
| /* set pad drive */ |
| rtsx_pci_init_cmd(pcr); |
| rts5227_fill_driving(pcr, voltage); |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| |
| /* rts522a operations mainly derived from rts5227, except phy/hw init setting. |
| */ |
| static const struct pcr_ops rts522a_pcr_ops = { |
| .fetch_vendor_settings = rts5227_fetch_vendor_settings, |
| .extra_init_hw = rts522a_extra_init_hw, |
| .optimize_phy = rts522a_optimize_phy, |
| .turn_on_led = rts5227_turn_on_led, |
| .turn_off_led = rts5227_turn_off_led, |
| .enable_auto_blink = rts5227_enable_auto_blink, |
| .disable_auto_blink = rts5227_disable_auto_blink, |
| .card_power_on = rts5227_card_power_on, |
| .card_power_off = rts5227_card_power_off, |
| .switch_output_voltage = rts522a_switch_output_voltage, |
| .cd_deglitch = NULL, |
| .conv_clk_and_div_n = NULL, |
| .force_power_down = rts5227_force_power_down, |
| }; |
| |
| void rts522a_init_params(struct rtsx_pcr *pcr) |
| { |
| rts5227_init_params(pcr); |
| pcr->tx_initial_phase = SET_CLOCK_PHASE(20, 20, 11); |
| pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3; |
| |
| pcr->option.ocp_en = 1; |
| if (pcr->option.ocp_en) |
| pcr->hw_param.interrupt_en |= SD_OC_INT_EN; |
| pcr->hw_param.ocp_glitch = SD_OCP_GLITCH_10M; |
| pcr->option.sd_800mA_ocp_thd = RTS522A_OCP_THD_800; |
| |
| } |