| /* |
| * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer |
| * |
| * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2013 John Crispin <blogic@openwrt.org> |
| * |
| * This driver was based on: drivers/watchdog/softdog.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/reset.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/watchdog.h> |
| #include <linux/miscdevice.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/mach-ralink/ralink_regs.h> |
| |
| #define SYSC_RSTSTAT 0x38 |
| #define WDT_RST_CAUSE BIT(1) |
| |
| #define RALINK_WDT_TIMEOUT 30 |
| #define RALINK_WDT_PRESCALE 65536 |
| |
| #define TIMER_REG_TMR1LOAD 0x00 |
| #define TIMER_REG_TMR1CTL 0x08 |
| |
| #define TMRSTAT_TMR1RST BIT(5) |
| |
| #define TMR1CTL_ENABLE BIT(7) |
| #define TMR1CTL_MODE_SHIFT 4 |
| #define TMR1CTL_MODE_MASK 0x3 |
| #define TMR1CTL_MODE_FREE_RUNNING 0x0 |
| #define TMR1CTL_MODE_PERIODIC 0x1 |
| #define TMR1CTL_MODE_TIMEOUT 0x2 |
| #define TMR1CTL_MODE_WDT 0x3 |
| #define TMR1CTL_PRESCALE_MASK 0xf |
| #define TMR1CTL_PRESCALE_65536 0xf |
| |
| static struct clk *rt288x_wdt_clk; |
| static unsigned long rt288x_wdt_freq; |
| static void __iomem *rt288x_wdt_base; |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static inline void rt_wdt_w32(unsigned reg, u32 val) |
| { |
| iowrite32(val, rt288x_wdt_base + reg); |
| } |
| |
| static inline u32 rt_wdt_r32(unsigned reg) |
| { |
| return ioread32(rt288x_wdt_base + reg); |
| } |
| |
| static int rt288x_wdt_ping(struct watchdog_device *w) |
| { |
| rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_start(struct watchdog_device *w) |
| { |
| u32 t; |
| |
| t = rt_wdt_r32(TIMER_REG_TMR1CTL); |
| t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT | |
| TMR1CTL_PRESCALE_MASK); |
| t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT | |
| TMR1CTL_PRESCALE_65536); |
| rt_wdt_w32(TIMER_REG_TMR1CTL, t); |
| |
| rt288x_wdt_ping(w); |
| |
| t = rt_wdt_r32(TIMER_REG_TMR1CTL); |
| t |= TMR1CTL_ENABLE; |
| rt_wdt_w32(TIMER_REG_TMR1CTL, t); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_stop(struct watchdog_device *w) |
| { |
| u32 t; |
| |
| rt288x_wdt_ping(w); |
| |
| t = rt_wdt_r32(TIMER_REG_TMR1CTL); |
| t &= ~TMR1CTL_ENABLE; |
| rt_wdt_w32(TIMER_REG_TMR1CTL, t); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t) |
| { |
| w->timeout = t; |
| rt288x_wdt_ping(w); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_bootcause(void) |
| { |
| if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) |
| return WDIOF_CARDRESET; |
| |
| return 0; |
| } |
| |
| static struct watchdog_info rt288x_wdt_info = { |
| .identity = "Ralink Watchdog", |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| }; |
| |
| static struct watchdog_ops rt288x_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = rt288x_wdt_start, |
| .stop = rt288x_wdt_stop, |
| .ping = rt288x_wdt_ping, |
| .set_timeout = rt288x_wdt_set_timeout, |
| }; |
| |
| static struct watchdog_device rt288x_wdt_dev = { |
| .info = &rt288x_wdt_info, |
| .ops = &rt288x_wdt_ops, |
| .min_timeout = 1, |
| }; |
| |
| static int rt288x_wdt_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (IS_ERR(rt288x_wdt_base)) |
| return PTR_ERR(rt288x_wdt_base); |
| |
| rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(rt288x_wdt_clk)) |
| return PTR_ERR(rt288x_wdt_clk); |
| |
| device_reset(&pdev->dev); |
| |
| rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE; |
| |
| rt288x_wdt_dev.dev = &pdev->dev; |
| rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause(); |
| |
| rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq); |
| rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout; |
| |
| watchdog_set_nowayout(&rt288x_wdt_dev, nowayout); |
| |
| ret = watchdog_register_device(&rt288x_wdt_dev); |
| if (!ret) |
| dev_info(&pdev->dev, "Initialized\n"); |
| |
| return 0; |
| } |
| |
| static int rt288x_wdt_remove(struct platform_device *pdev) |
| { |
| watchdog_unregister_device(&rt288x_wdt_dev); |
| |
| return 0; |
| } |
| |
| static void rt288x_wdt_shutdown(struct platform_device *pdev) |
| { |
| rt288x_wdt_stop(&rt288x_wdt_dev); |
| } |
| |
| static const struct of_device_id rt288x_wdt_match[] = { |
| { .compatible = "ralink,rt2880-wdt" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rt288x_wdt_match); |
| |
| static struct platform_driver rt288x_wdt_driver = { |
| .probe = rt288x_wdt_probe, |
| .remove = rt288x_wdt_remove, |
| .shutdown = rt288x_wdt_shutdown, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .of_match_table = rt288x_wdt_match, |
| }, |
| }; |
| |
| module_platform_driver(rt288x_wdt_driver); |
| |
| MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver"); |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); |
| MODULE_LICENSE("GPL v2"); |