| /* |
| * File: drivers/pci/pcie/aspm.c |
| * Enabling PCIE link L0s/L1 state and Clock Power Management |
| * |
| * Copyright (C) 2007 Intel |
| * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) |
| * Copyright (C) Shaohua Li (shaohua.li@intel.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/pci_regs.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/pci-aspm.h> |
| #include "../pci.h" |
| |
| #ifdef MODULE_PARAM_PREFIX |
| #undef MODULE_PARAM_PREFIX |
| #endif |
| #define MODULE_PARAM_PREFIX "pcie_aspm." |
| |
| struct endpoint_state { |
| unsigned int l0s_acceptable_latency; |
| unsigned int l1_acceptable_latency; |
| }; |
| |
| struct pcie_link_state { |
| struct list_head sibiling; |
| struct pci_dev *pdev; |
| bool downstream_has_switch; |
| |
| struct pcie_link_state *parent; |
| struct list_head children; |
| struct list_head link; |
| |
| /* ASPM state */ |
| unsigned int support_state; |
| unsigned int enabled_state; |
| unsigned int bios_aspm_state; |
| /* upstream component */ |
| unsigned int l0s_upper_latency; |
| unsigned int l1_upper_latency; |
| /* downstream component */ |
| unsigned int l0s_down_latency; |
| unsigned int l1_down_latency; |
| /* Clock PM state*/ |
| unsigned int clk_pm_capable; |
| unsigned int clk_pm_enabled; |
| unsigned int bios_clk_state; |
| |
| /* |
| * A pcie downstream port only has one slot under it, so at most there |
| * are 8 functions |
| */ |
| struct endpoint_state endpoints[8]; |
| }; |
| |
| static int aspm_disabled, aspm_force; |
| static DEFINE_MUTEX(aspm_lock); |
| static LIST_HEAD(link_list); |
| |
| #define POLICY_DEFAULT 0 /* BIOS default setting */ |
| #define POLICY_PERFORMANCE 1 /* high performance */ |
| #define POLICY_POWERSAVE 2 /* high power saving */ |
| static int aspm_policy; |
| static const char *policy_str[] = { |
| [POLICY_DEFAULT] = "default", |
| [POLICY_PERFORMANCE] = "performance", |
| [POLICY_POWERSAVE] = "powersave" |
| }; |
| |
| static int policy_to_aspm_state(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| switch (aspm_policy) { |
| case POLICY_PERFORMANCE: |
| /* Disable ASPM and Clock PM */ |
| return 0; |
| case POLICY_POWERSAVE: |
| /* Enable ASPM L0s/L1 */ |
| return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; |
| case POLICY_DEFAULT: |
| return link_state->bios_aspm_state; |
| } |
| return 0; |
| } |
| |
| static int policy_to_clkpm_state(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| switch (aspm_policy) { |
| case POLICY_PERFORMANCE: |
| /* Disable ASPM and Clock PM */ |
| return 0; |
| case POLICY_POWERSAVE: |
| /* Disable Clock PM */ |
| return 1; |
| case POLICY_DEFAULT: |
| return link_state->bios_clk_state; |
| } |
| return 0; |
| } |
| |
| static void pcie_set_clock_pm(struct pci_dev *pdev, int enable) |
| { |
| struct pci_dev *child_dev; |
| int pos; |
| u16 reg16; |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| if (!pos) |
| return; |
| pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16); |
| if (enable) |
| reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN; |
| else |
| reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN; |
| pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16); |
| } |
| link_state->clk_pm_enabled = !!enable; |
| } |
| |
| static void pcie_check_clock_pm(struct pci_dev *pdev, int blacklist) |
| { |
| int pos; |
| u32 reg32; |
| u16 reg16; |
| int capable = 1, enabled = 1; |
| struct pci_dev *child_dev; |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| /* All functions should have the same cap and state, take the worst */ |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| if (!pos) |
| return; |
| pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, ®32); |
| if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { |
| capable = 0; |
| enabled = 0; |
| break; |
| } |
| pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16); |
| if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) |
| enabled = 0; |
| } |
| link_state->clk_pm_enabled = enabled; |
| link_state->bios_clk_state = enabled; |
| if (!blacklist) { |
| link_state->clk_pm_capable = capable; |
| pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev)); |
| } else { |
| link_state->clk_pm_capable = 0; |
| pcie_set_clock_pm(pdev, 0); |
| } |
| } |
| |
| static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev) |
| { |
| struct pci_dev *child_dev; |
| |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| if (child_dev->pcie_type == PCI_EXP_TYPE_UPSTREAM) |
| return true; |
| } |
| return false; |
| } |
| |
| /* |
| * pcie_aspm_configure_common_clock: check if the 2 ends of a link |
| * could use common clock. If they are, configure them to use the |
| * common clock. That will reduce the ASPM state exit latency. |
| */ |
| static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) |
| { |
| int pos, child_pos, i = 0; |
| u16 reg16 = 0; |
| struct pci_dev *child_dev; |
| int same_clock = 1; |
| unsigned long start_jiffies; |
| u16 child_regs[8], parent_reg; |
| /* |
| * all functions of a slot should have the same Slot Clock |
| * Configuration, so just check one function |
| * */ |
| child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev, |
| bus_list); |
| BUG_ON(!child_dev->is_pcie); |
| |
| /* Check downstream component if bit Slot Clock Configuration is 1 */ |
| child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) |
| same_clock = 0; |
| |
| /* Check upstream component if bit Slot Clock Configuration is 1 */ |
| pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) |
| same_clock = 0; |
| |
| /* Configure downstream component, all functions */ |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, |
| ®16); |
| child_regs[i] = reg16; |
| if (same_clock) |
| reg16 |= PCI_EXP_LNKCTL_CCC; |
| else |
| reg16 &= ~PCI_EXP_LNKCTL_CCC; |
| pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, |
| reg16); |
| i++; |
| } |
| |
| /* Configure upstream component */ |
| pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); |
| parent_reg = reg16; |
| if (same_clock) |
| reg16 |= PCI_EXP_LNKCTL_CCC; |
| else |
| reg16 &= ~PCI_EXP_LNKCTL_CCC; |
| pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); |
| |
| /* retrain link */ |
| reg16 |= PCI_EXP_LNKCTL_RL; |
| pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); |
| |
| /* Wait for link training end */ |
| /* break out after waiting for 1 second */ |
| start_jiffies = jiffies; |
| while ((jiffies - start_jiffies) < HZ) { |
| pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_LT)) |
| break; |
| cpu_relax(); |
| } |
| /* training failed -> recover */ |
| if ((jiffies - start_jiffies) >= HZ) { |
| dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" |
| " common clock\n"); |
| i = 0; |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, |
| bus_list) { |
| child_pos = pci_find_capability(child_dev, |
| PCI_CAP_ID_EXP); |
| pci_write_config_word(child_dev, |
| child_pos + PCI_EXP_LNKCTL, |
| child_regs[i]); |
| i++; |
| } |
| pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); |
| } |
| } |
| |
| /* |
| * calc_L0S_latency: Convert L0s latency encoding to ns |
| */ |
| static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac) |
| { |
| unsigned int ns = 64; |
| |
| if (latency_encoding == 0x7) { |
| if (ac) |
| ns = -1U; |
| else |
| ns = 5*1000; /* > 4us */ |
| } else |
| ns *= (1 << latency_encoding); |
| return ns; |
| } |
| |
| /* |
| * calc_L1_latency: Convert L1 latency encoding to ns |
| */ |
| static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac) |
| { |
| unsigned int ns = 1000; |
| |
| if (latency_encoding == 0x7) { |
| if (ac) |
| ns = -1U; |
| else |
| ns = 65*1000; /* > 64us */ |
| } else |
| ns *= (1 << latency_encoding); |
| return ns; |
| } |
| |
| static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state, |
| unsigned int *l0s, unsigned int *l1, unsigned int *enabled) |
| { |
| int pos; |
| u16 reg16; |
| u32 reg32; |
| unsigned int latency; |
| |
| pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32); |
| *state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10; |
| if (*state != PCIE_LINK_STATE_L0S && |
| *state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S)) |
| *state = 0; |
| if (*state == 0) |
| return; |
| |
| latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12; |
| *l0s = calc_L0S_latency(latency, 0); |
| if (*state & PCIE_LINK_STATE_L1) { |
| latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15; |
| *l1 = calc_L1_latency(latency, 0); |
| } |
| pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); |
| *enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1); |
| } |
| |
| static void pcie_aspm_cap_init(struct pci_dev *pdev) |
| { |
| struct pci_dev *child_dev; |
| u32 state, tmp; |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| /* upstream component states */ |
| pcie_aspm_get_cap_device(pdev, &link_state->support_state, |
| &link_state->l0s_upper_latency, |
| &link_state->l1_upper_latency, |
| &link_state->enabled_state); |
| /* downstream component states, all functions have the same setting */ |
| child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev, |
| bus_list); |
| pcie_aspm_get_cap_device(child_dev, &state, |
| &link_state->l0s_down_latency, |
| &link_state->l1_down_latency, |
| &tmp); |
| link_state->support_state &= state; |
| if (!link_state->support_state) |
| return; |
| link_state->enabled_state &= link_state->support_state; |
| link_state->bios_aspm_state = link_state->enabled_state; |
| |
| /* ENDPOINT states*/ |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| int pos; |
| u32 reg32; |
| unsigned int latency; |
| struct endpoint_state *ep_state = |
| &link_state->endpoints[PCI_FUNC(child_dev->devfn)]; |
| |
| if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT && |
| child_dev->pcie_type != PCI_EXP_TYPE_LEG_END) |
| continue; |
| |
| pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, ®32); |
| latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6; |
| latency = calc_L0S_latency(latency, 1); |
| ep_state->l0s_acceptable_latency = latency; |
| if (link_state->support_state & PCIE_LINK_STATE_L1) { |
| latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9; |
| latency = calc_L1_latency(latency, 1); |
| ep_state->l1_acceptable_latency = latency; |
| } |
| } |
| } |
| |
| static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev, |
| unsigned int state) |
| { |
| struct pci_dev *parent_dev, *tmp_dev; |
| unsigned int latency, l1_latency = 0; |
| struct pcie_link_state *link_state; |
| struct endpoint_state *ep_state; |
| |
| parent_dev = pdev->bus->self; |
| link_state = parent_dev->link_state; |
| state &= link_state->support_state; |
| if (state == 0) |
| return 0; |
| ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)]; |
| |
| /* |
| * Check latency for endpoint device. |
| * TBD: The latency from the endpoint to root complex vary per |
| * switch's upstream link state above the device. Here we just do a |
| * simple check which assumes all links above the device can be in L1 |
| * state, that is we just consider the worst case. If switch's upstream |
| * link can't be put into L0S/L1, then our check is too strictly. |
| */ |
| tmp_dev = pdev; |
| while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) { |
| parent_dev = tmp_dev->bus->self; |
| link_state = parent_dev->link_state; |
| if (state & PCIE_LINK_STATE_L0S) { |
| latency = max_t(unsigned int, |
| link_state->l0s_upper_latency, |
| link_state->l0s_down_latency); |
| if (latency > ep_state->l0s_acceptable_latency) |
| state &= ~PCIE_LINK_STATE_L0S; |
| } |
| if (state & PCIE_LINK_STATE_L1) { |
| latency = max_t(unsigned int, |
| link_state->l1_upper_latency, |
| link_state->l1_down_latency); |
| if (latency + l1_latency > |
| ep_state->l1_acceptable_latency) |
| state &= ~PCIE_LINK_STATE_L1; |
| } |
| if (!parent_dev->bus->self) /* parent_dev is a root port */ |
| break; |
| else { |
| /* |
| * parent_dev is the downstream port of a switch, make |
| * tmp_dev the upstream port of the switch |
| */ |
| tmp_dev = parent_dev->bus->self; |
| /* |
| * every switch on the path to root complex need 1 more |
| * microsecond for L1. Spec doesn't mention L0S. |
| */ |
| if (state & PCIE_LINK_STATE_L1) |
| l1_latency += 1000; |
| } |
| } |
| return state; |
| } |
| |
| static unsigned int pcie_aspm_check_state(struct pci_dev *pdev, |
| unsigned int state) |
| { |
| struct pci_dev *child_dev; |
| |
| /* If no child, ignore the link */ |
| if (list_empty(&pdev->subordinate->devices)) |
| return state; |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { |
| /* |
| * If downstream component of a link is pci bridge, we |
| * disable ASPM for now for the link |
| * */ |
| state = 0; |
| break; |
| } |
| if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT && |
| child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)) |
| continue; |
| /* Device not in D0 doesn't need check latency */ |
| if (child_dev->current_state == PCI_D1 || |
| child_dev->current_state == PCI_D2 || |
| child_dev->current_state == PCI_D3hot || |
| child_dev->current_state == PCI_D3cold) |
| continue; |
| state = __pcie_aspm_check_state_one(child_dev, state); |
| } |
| return state; |
| } |
| |
| static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state) |
| { |
| u16 reg16; |
| int pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| |
| pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); |
| reg16 &= ~0x3; |
| reg16 |= state; |
| pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); |
| } |
| |
| static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state) |
| { |
| struct pci_dev *child_dev; |
| int valid = 1; |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| /* If no child, disable the link */ |
| if (list_empty(&pdev->subordinate->devices)) |
| state = 0; |
| /* |
| * if the downstream component has pci bridge function, don't do ASPM |
| * now |
| */ |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { |
| valid = 0; |
| break; |
| } |
| } |
| if (!valid) |
| return; |
| |
| /* |
| * spec 2.0 suggests all functions should be configured the same |
| * setting for ASPM. Enabling ASPM L1 should be done in upstream |
| * component first and then downstream, and vice versa for disabling |
| * ASPM L1. Spec doesn't mention L0S. |
| */ |
| if (state & PCIE_LINK_STATE_L1) |
| __pcie_aspm_config_one_dev(pdev, state); |
| |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) |
| __pcie_aspm_config_one_dev(child_dev, state); |
| |
| if (!(state & PCIE_LINK_STATE_L1)) |
| __pcie_aspm_config_one_dev(pdev, state); |
| |
| link_state->enabled_state = state; |
| } |
| |
| static struct pcie_link_state *get_root_port_link(struct pcie_link_state *link) |
| { |
| struct pcie_link_state *root_port_link = link; |
| while (root_port_link->parent) |
| root_port_link = root_port_link->parent; |
| return root_port_link; |
| } |
| |
| /* check the whole hierarchy, and configure each link in the hierarchy */ |
| static void __pcie_aspm_configure_link_state(struct pci_dev *pdev, |
| unsigned int state) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| struct pcie_link_state *root_port_link = get_root_port_link(link_state); |
| struct pcie_link_state *leaf; |
| |
| state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; |
| |
| /* check all links who have specific root port link */ |
| list_for_each_entry(leaf, &link_list, sibiling) { |
| if (!list_empty(&leaf->children) || |
| get_root_port_link(leaf) != root_port_link) |
| continue; |
| state = pcie_aspm_check_state(leaf->pdev, state); |
| } |
| /* check root port link too in case it hasn't children */ |
| state = pcie_aspm_check_state(root_port_link->pdev, state); |
| |
| if (link_state->enabled_state == state) |
| return; |
| |
| /* |
| * we must change the hierarchy. See comments in |
| * __pcie_aspm_config_link for the order |
| **/ |
| if (state & PCIE_LINK_STATE_L1) { |
| list_for_each_entry(leaf, &link_list, sibiling) { |
| if (get_root_port_link(leaf) == root_port_link) |
| __pcie_aspm_config_link(leaf->pdev, state); |
| } |
| } else { |
| list_for_each_entry_reverse(leaf, &link_list, sibiling) { |
| if (get_root_port_link(leaf) == root_port_link) |
| __pcie_aspm_config_link(leaf->pdev, state); |
| } |
| } |
| } |
| |
| /* |
| * pcie_aspm_configure_link_state: enable/disable PCI express link state |
| * @pdev: the root port or switch downstream port |
| */ |
| static void pcie_aspm_configure_link_state(struct pci_dev *pdev, |
| unsigned int state) |
| { |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| __pcie_aspm_configure_link_state(pdev, state); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| |
| static void free_link_state(struct pci_dev *pdev) |
| { |
| kfree(pdev->link_state); |
| pdev->link_state = NULL; |
| } |
| |
| static int pcie_aspm_sanity_check(struct pci_dev *pdev) |
| { |
| struct pci_dev *child_dev; |
| int child_pos; |
| u32 reg32; |
| |
| /* |
| * Some functions in a slot might not all be PCIE functions, very |
| * strange. Disable ASPM for the whole slot |
| */ |
| list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { |
| child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
| if (!child_pos) |
| return -EINVAL; |
| |
| /* |
| * Disable ASPM for pre-1.1 PCIe device, we follow MS to use |
| * RBER bit to determine if a function is 1.1 version device |
| */ |
| pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP, |
| ®32); |
| if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { |
| dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM" |
| " on pre-1.1 PCIe device. You can enable it" |
| " with 'pcie_aspm=force'\n"); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * pcie_aspm_init_link_state: Initiate PCI express link state. |
| * It is called after the pcie and its children devices are scaned. |
| * @pdev: the root port or switch downstream port |
| */ |
| void pcie_aspm_init_link_state(struct pci_dev *pdev) |
| { |
| unsigned int state; |
| struct pcie_link_state *link_state; |
| int error = 0; |
| int blacklist; |
| |
| if (aspm_disabled || !pdev->is_pcie || pdev->link_state) |
| return; |
| if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && |
| pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) |
| return; |
| down_read(&pci_bus_sem); |
| if (list_empty(&pdev->subordinate->devices)) |
| goto out; |
| |
| blacklist = !!pcie_aspm_sanity_check(pdev); |
| |
| mutex_lock(&aspm_lock); |
| |
| link_state = kzalloc(sizeof(*link_state), GFP_KERNEL); |
| if (!link_state) |
| goto unlock_out; |
| |
| link_state->downstream_has_switch = pcie_aspm_downstream_has_switch(pdev); |
| INIT_LIST_HEAD(&link_state->children); |
| INIT_LIST_HEAD(&link_state->link); |
| if (pdev->bus->self) {/* this is a switch */ |
| struct pcie_link_state *parent_link_state; |
| |
| parent_link_state = pdev->bus->parent->self->link_state; |
| if (!parent_link_state) { |
| kfree(link_state); |
| goto unlock_out; |
| } |
| list_add(&link_state->link, &parent_link_state->children); |
| link_state->parent = parent_link_state; |
| } |
| |
| pdev->link_state = link_state; |
| |
| if (!blacklist) { |
| pcie_aspm_configure_common_clock(pdev); |
| pcie_aspm_cap_init(pdev); |
| } else { |
| link_state->enabled_state = PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; |
| link_state->bios_aspm_state = 0; |
| /* Set support state to 0, so we will disable ASPM later */ |
| link_state->support_state = 0; |
| } |
| |
| link_state->pdev = pdev; |
| list_add(&link_state->sibiling, &link_list); |
| |
| if (link_state->downstream_has_switch) { |
| /* |
| * If link has switch, delay the link config. The leaf link |
| * initialization will config the whole hierarchy. but we must |
| * make sure BIOS doesn't set unsupported link state |
| **/ |
| state = pcie_aspm_check_state(pdev, link_state->bios_aspm_state); |
| __pcie_aspm_config_link(pdev, state); |
| } else |
| __pcie_aspm_configure_link_state(pdev, |
| policy_to_aspm_state(pdev)); |
| |
| pcie_check_clock_pm(pdev, blacklist); |
| |
| unlock_out: |
| if (error) |
| free_link_state(pdev); |
| mutex_unlock(&aspm_lock); |
| out: |
| up_read(&pci_bus_sem); |
| } |
| |
| /* @pdev: the endpoint device */ |
| void pcie_aspm_exit_link_state(struct pci_dev *pdev) |
| { |
| struct pci_dev *parent = pdev->bus->self; |
| struct pcie_link_state *link_state = parent->link_state; |
| |
| if (aspm_disabled || !pdev->is_pcie || !parent || !link_state) |
| return; |
| if (parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT && |
| parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) |
| return; |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| |
| /* |
| * All PCIe functions are in one slot, remove one function will remove |
| * the the whole slot, so just wait |
| */ |
| if (!list_empty(&parent->subordinate->devices)) |
| goto out; |
| |
| /* All functions are removed, so just disable ASPM for the link */ |
| __pcie_aspm_config_one_dev(parent, 0); |
| list_del(&link_state->sibiling); |
| list_del(&link_state->link); |
| /* Clock PM is for endpoint device */ |
| |
| free_link_state(parent); |
| out: |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| |
| /* @pdev: the root port or switch downstream port */ |
| void pcie_aspm_pm_state_change(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| if (aspm_disabled || !pdev->is_pcie || !pdev->link_state) |
| return; |
| if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && |
| pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) |
| return; |
| /* |
| * devices changed PM state, we should recheck if latency meets all |
| * functions' requirement |
| */ |
| pcie_aspm_configure_link_state(pdev, link_state->enabled_state); |
| } |
| |
| /* |
| * pci_disable_link_state - disable pci device's link state, so the link will |
| * never enter specific states |
| */ |
| void pci_disable_link_state(struct pci_dev *pdev, int state) |
| { |
| struct pci_dev *parent = pdev->bus->self; |
| struct pcie_link_state *link_state; |
| |
| if (aspm_disabled || !pdev->is_pcie) |
| return; |
| if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT || |
| pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) |
| parent = pdev; |
| if (!parent || !parent->link_state) |
| return; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| link_state = parent->link_state; |
| link_state->support_state &= |
| ~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1)); |
| if (state & PCIE_LINK_STATE_CLKPM) |
| link_state->clk_pm_capable = 0; |
| |
| __pcie_aspm_configure_link_state(parent, link_state->enabled_state); |
| if (!link_state->clk_pm_capable && link_state->clk_pm_enabled) |
| pcie_set_clock_pm(parent, 0); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| EXPORT_SYMBOL(pci_disable_link_state); |
| |
| static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp) |
| { |
| int i; |
| struct pci_dev *pdev; |
| struct pcie_link_state *link_state; |
| |
| for (i = 0; i < ARRAY_SIZE(policy_str); i++) |
| if (!strncmp(val, policy_str[i], strlen(policy_str[i]))) |
| break; |
| if (i >= ARRAY_SIZE(policy_str)) |
| return -EINVAL; |
| if (i == aspm_policy) |
| return 0; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| aspm_policy = i; |
| list_for_each_entry(link_state, &link_list, sibiling) { |
| pdev = link_state->pdev; |
| __pcie_aspm_configure_link_state(pdev, |
| policy_to_aspm_state(pdev)); |
| if (link_state->clk_pm_capable && |
| link_state->clk_pm_enabled != policy_to_clkpm_state(pdev)) |
| pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev)); |
| |
| } |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| return 0; |
| } |
| |
| static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp) |
| { |
| int i, cnt = 0; |
| for (i = 0; i < ARRAY_SIZE(policy_str); i++) |
| if (i == aspm_policy) |
| cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]); |
| else |
| cnt += sprintf(buffer + cnt, "%s ", policy_str[i]); |
| return cnt; |
| } |
| |
| module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy, |
| NULL, 0644); |
| |
| #ifdef CONFIG_PCIEASPM_DEBUG |
| static ssize_t link_state_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| struct pcie_link_state *link_state = pci_device->link_state; |
| |
| return sprintf(buf, "%d\n", link_state->enabled_state); |
| } |
| |
| static ssize_t link_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| int state; |
| |
| if (n < 1) |
| return -EINVAL; |
| state = buf[0]-'0'; |
| if (state >= 0 && state <= 3) { |
| /* setup link aspm state */ |
| pcie_aspm_configure_link_state(pci_device, state); |
| return n; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static ssize_t clk_ctl_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| struct pcie_link_state *link_state = pci_device->link_state; |
| |
| return sprintf(buf, "%d\n", link_state->clk_pm_enabled); |
| } |
| |
| static ssize_t clk_ctl_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| int state; |
| |
| if (n < 1) |
| return -EINVAL; |
| state = buf[0]-'0'; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| pcie_set_clock_pm(pci_device, !!state); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| |
| return n; |
| } |
| |
| static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store); |
| static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store); |
| |
| static char power_group[] = "power"; |
| void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && |
| pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) |
| return; |
| |
| if (link_state->support_state) |
| sysfs_add_file_to_group(&pdev->dev.kobj, |
| &dev_attr_link_state.attr, power_group); |
| if (link_state->clk_pm_capable) |
| sysfs_add_file_to_group(&pdev->dev.kobj, |
| &dev_attr_clk_ctl.attr, power_group); |
| } |
| |
| void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && |
| pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) |
| return; |
| |
| if (link_state->support_state) |
| sysfs_remove_file_from_group(&pdev->dev.kobj, |
| &dev_attr_link_state.attr, power_group); |
| if (link_state->clk_pm_capable) |
| sysfs_remove_file_from_group(&pdev->dev.kobj, |
| &dev_attr_clk_ctl.attr, power_group); |
| } |
| #endif |
| |
| static int __init pcie_aspm_disable(char *str) |
| { |
| if (!strcmp(str, "off")) { |
| aspm_disabled = 1; |
| printk(KERN_INFO "PCIe ASPM is disabled\n"); |
| } else if (!strcmp(str, "force")) { |
| aspm_force = 1; |
| printk(KERN_INFO "PCIe ASPM is forcedly enabled\n"); |
| } |
| return 1; |
| } |
| |
| __setup("pcie_aspm=", pcie_aspm_disable); |
| |
| void pcie_no_aspm(void) |
| { |
| if (!aspm_force) |
| aspm_disabled = 1; |
| } |
| |
| /** |
| * pcie_aspm_enabled - is PCIe ASPM enabled? |
| * |
| * Returns true if ASPM has not been disabled by the command-line option |
| * pcie_aspm=off. |
| **/ |
| int pcie_aspm_enabled(void) |
| { |
| return !aspm_disabled; |
| } |
| EXPORT_SYMBOL(pcie_aspm_enabled); |
| |