| MAX98090 audio CODEC | |
| This device supports I2C only. | |
| Required properties: | |
| - compatible : "maxim,max98090" or "maxim,max98091". | |
| - reg : The I2C address of the device. | |
| - interrupts : The CODEC's interrupt output. | |
| Optional properties: | |
| - clocks: The phandle of the master clock to the CODEC | |
| - clock-names: Should be "mclk" | |
| Pins on the device (for linking into audio routes): | |
| * MIC1 | |
| * MIC2 | |
| * DMICL | |
| * DMICR | |
| * IN1 | |
| * IN2 | |
| * IN3 | |
| * IN4 | |
| * IN5 | |
| * IN6 | |
| * IN12 | |
| * IN34 | |
| * IN56 | |
| * HPL | |
| * HPR | |
| * SPKL | |
| * SPKR | |
| * RCVL | |
| * RCVR | |
| * MICBIAS | |
| Example: | |
| audio-codec@10 { | |
| compatible = "maxim,max98090"; | |
| reg = <0x10>; | |
| interrupt-parent = <&gpio>; | |
| interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; | |
| }; |