| # |
| # arch/arm64/Makefile |
| # |
| # This file is included by the global makefile so that you can add your own |
| # architecture-specific flags and dependencies. |
| # |
| # This file is subject to the terms and conditions of the GNU General Public |
| # License. See the file "COPYING" in the main directory of this archive |
| # for more details. |
| # |
| # Copyright (C) 1995-2001 by Russell King |
| |
| LDFLAGS_vmlinux :=--no-undefined -X |
| CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) |
| GZFLAGS :=-9 |
| |
| ifeq ($(CONFIG_RELOCATABLE), y) |
| # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour |
| # for relative relocs, since this leads to better Image compression |
| # with the relocation offsets always being zero. |
| LDFLAGS_vmlinux += -pie -shared -Bsymbolic \ |
| $(call ld-option, --no-apply-dynamic-relocs) |
| endif |
| |
| ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) |
| ifeq ($(call ld-option, --fix-cortex-a53-843419),) |
| $(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum) |
| else |
| LDFLAGS_vmlinux += --fix-cortex-a53-843419 |
| endif |
| endif |
| |
| KBUILD_DEFCONFIG := defconfig |
| |
| # Check for binutils support for specific extensions |
| lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) |
| |
| ifeq ($(CONFIG_ARM64_LSE_ATOMICS), y) |
| ifeq ($(lseinstr),) |
| $(warning LSE atomics not supported by binutils) |
| endif |
| endif |
| |
| ifeq ($(CONFIG_ARM64), y) |
| brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1) |
| |
| ifneq ($(brokengasinst),) |
| $(warning Detected assembler with broken .inst; disassembly will be unreliable) |
| endif |
| endif |
| |
| KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) |
| KBUILD_CFLAGS += -fno-asynchronous-unwind-tables |
| KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) |
| |
| KBUILD_CFLAGS += $(call cc-option,-mabi=lp64) |
| KBUILD_AFLAGS += $(call cc-option,-mabi=lp64) |
| |
| ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) |
| KBUILD_CPPFLAGS += -mbig-endian |
| CHECKFLAGS += -D__AARCH64EB__ |
| AS += -EB |
| # Prefer the baremetal ELF build target, but not all toolchains include |
| # it so fall back to the standard linux version if needed. |
| KBUILD_LDFLAGS += -EB $(call ld-option, -maarch64elfb, -maarch64linuxb) |
| UTS_MACHINE := aarch64_be |
| else |
| KBUILD_CPPFLAGS += -mlittle-endian |
| CHECKFLAGS += -D__AARCH64EL__ |
| AS += -EL |
| # Same as above, prefer ELF but fall back to linux target if needed. |
| KBUILD_LDFLAGS += -EL $(call ld-option, -maarch64elf, -maarch64linux) |
| UTS_MACHINE := aarch64 |
| endif |
| |
| CHECKFLAGS += -D__aarch64__ |
| |
| ifeq ($(CONFIG_ARM64_MODULE_PLTS),y) |
| KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm64/kernel/module.lds |
| endif |
| |
| # Default value |
| head-y := arch/arm64/kernel/head.o |
| |
| # The byte offset of the kernel image in RAM from the start of RAM. |
| ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y) |
| TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \ |
| int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \ |
| rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}") |
| else |
| TEXT_OFFSET := 0x00080000 |
| endif |
| |
| # KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT)) |
| # - (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) |
| # in 32-bit arithmetic |
| KASAN_SHADOW_SCALE_SHIFT := 3 |
| KASAN_SHADOW_OFFSET := $(shell printf "0x%08x00000000\n" $$(( \ |
| (0xffffffff & (-1 << ($(CONFIG_ARM64_VA_BITS) - 32))) \ |
| + (1 << ($(CONFIG_ARM64_VA_BITS) - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) \ |
| - (1 << (64 - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) )) ) |
| |
| export TEXT_OFFSET GZFLAGS |
| |
| core-y += arch/arm64/kernel/ arch/arm64/mm/ |
| core-$(CONFIG_NET) += arch/arm64/net/ |
| core-$(CONFIG_KVM) += arch/arm64/kvm/ |
| core-$(CONFIG_XEN) += arch/arm64/xen/ |
| core-$(CONFIG_CRYPTO) += arch/arm64/crypto/ |
| libs-y := arch/arm64/lib/ $(libs-y) |
| core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a |
| |
| # Default target when executing plain make |
| boot := arch/arm64/boot |
| KBUILD_IMAGE := $(boot)/Image.gz |
| |
| all: Image.gz |
| |
| |
| Image: vmlinux |
| $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ |
| |
| Image.%: Image |
| $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ |
| |
| zinstall install: |
| $(Q)$(MAKE) $(build)=$(boot) $@ |
| |
| PHONY += vdso_install |
| vdso_install: |
| $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ |
| |
| # We use MRPROPER_FILES and CLEAN_FILES now |
| archclean: |
| $(Q)$(MAKE) $(clean)=$(boot) |
| |
| # We need to generate vdso-offsets.h before compiling certain files in kernel/. |
| # In order to do that, we should use the archprepare target, but we can't since |
| # asm-offsets.h is included in some files used to generate vdso-offsets.h, and |
| # asm-offsets.h is built in prepare0, for which archprepare is a dependency. |
| # Therefore we need to generate the header after prepare0 has been made, hence |
| # this hack. |
| prepare: vdso_prepare |
| vdso_prepare: prepare0 |
| $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h |
| |
| define archhelp |
| echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' |
| echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' |
| echo ' install - Install uncompressed kernel' |
| echo ' zinstall - Install compressed kernel' |
| echo ' Install using (your) ~/bin/installkernel or' |
| echo ' (distribution) /sbin/installkernel or' |
| echo ' install to $$(INSTALL_PATH) and run lilo' |
| endef |