| /* |
| * linux/arch/i386/nmi.c |
| * |
| * NMI watchdog support on APIC systems |
| * |
| * Started by Ingo Molnar <mingo@redhat.com> |
| * |
| * Fixes: |
| * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. |
| * Mikael Pettersson : Power Management for local APIC NMI watchdog. |
| * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. |
| * Pavel Machek and |
| * Mikael Pettersson : PM converted to driver model. Disable/enable API. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/nmi.h> |
| #include <linux/sysdev.h> |
| #include <linux/sysctl.h> |
| #include <linux/percpu.h> |
| |
| #include <asm/smp.h> |
| #include <asm/nmi.h> |
| #include <asm/kdebug.h> |
| |
| #include "mach_traps.h" |
| |
| /* perfctr_nmi_owner tracks the ownership of the perfctr registers: |
| * evtsel_nmi_owner tracks the ownership of the event selection |
| * - different performance counters/ event selection may be reserved for |
| * different subsystems this reservation system just tries to coordinate |
| * things a little |
| */ |
| static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner); |
| static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[3]); |
| |
| /* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's |
| * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) |
| */ |
| #define NMI_MAX_COUNTER_BITS 66 |
| |
| /* nmi_active: |
| * >0: the lapic NMI watchdog is active, but can be disabled |
| * <0: the lapic NMI watchdog has not been set up, and cannot |
| * be enabled |
| * 0: the lapic NMI watchdog is disabled, but can be enabled |
| */ |
| atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ |
| |
| unsigned int nmi_watchdog = NMI_DEFAULT; |
| static unsigned int nmi_hz = HZ; |
| |
| struct nmi_watchdog_ctlblk { |
| int enabled; |
| u64 check_bit; |
| unsigned int cccr_msr; |
| unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ |
| unsigned int evntsel_msr; /* the MSR to select the events to handle */ |
| }; |
| static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); |
| |
| /* local prototypes */ |
| static void stop_apic_nmi_watchdog(void *unused); |
| static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); |
| |
| extern void show_registers(struct pt_regs *regs); |
| extern int unknown_nmi_panic; |
| |
| /* converts an msr to an appropriate reservation bit */ |
| static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) |
| { |
| /* returns the bit offset of the performance counter register */ |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return (msr - MSR_K7_PERFCTR0); |
| case X86_VENDOR_INTEL: |
| switch (boot_cpu_data.x86) { |
| case 6: |
| return (msr - MSR_P6_PERFCTR0); |
| case 15: |
| return (msr - MSR_P4_BPU_PERFCTR0); |
| } |
| } |
| return 0; |
| } |
| |
| /* converts an msr to an appropriate reservation bit */ |
| static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) |
| { |
| /* returns the bit offset of the event selection register */ |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return (msr - MSR_K7_EVNTSEL0); |
| case X86_VENDOR_INTEL: |
| switch (boot_cpu_data.x86) { |
| case 6: |
| return (msr - MSR_P6_EVNTSEL0); |
| case 15: |
| return (msr - MSR_P4_BSU_ESCR0); |
| } |
| } |
| return 0; |
| } |
| |
| /* checks for a bit availability (hack for oprofile) */ |
| int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) |
| { |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); |
| } |
| |
| /* checks the an msr for availability */ |
| int avail_to_resrv_perfctr_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); |
| } |
| |
| int reserve_perfctr_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner))) |
| return 1; |
| return 0; |
| } |
| |
| void release_perfctr_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner)); |
| } |
| |
| int reserve_evntsel_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| |
| counter = nmi_evntsel_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0])) |
| return 1; |
| return 0; |
| } |
| |
| void release_evntsel_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| |
| counter = nmi_evntsel_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]); |
| } |
| |
| static __cpuinit inline int nmi_known_cpu(void) |
| { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); |
| case X86_VENDOR_INTEL: |
| return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_SMP |
| /* The performance counters used by NMI_LOCAL_APIC don't trigger when |
| * the CPU is idle. To make sure the NMI watchdog really ticks on all |
| * CPUs during the test make them busy. |
| */ |
| static __init void nmi_cpu_busy(void *data) |
| { |
| volatile int *endflag = data; |
| local_irq_enable_in_hardirq(); |
| /* Intentionally don't use cpu_relax here. This is |
| to make sure that the performance counter really ticks, |
| even if there is a simulator or similar that catches the |
| pause instruction. On a real HT machine this is fine because |
| all other CPUs are busy with "useless" delay loops and don't |
| care if they get somewhat less cycles. */ |
| while (*endflag == 0) |
| barrier(); |
| } |
| #endif |
| |
| static int __init check_nmi_watchdog(void) |
| { |
| volatile int endflag = 0; |
| unsigned int *prev_nmi_count; |
| int cpu; |
| |
| if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) |
| return 0; |
| |
| if (!atomic_read(&nmi_active)) |
| return 0; |
| |
| prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); |
| if (!prev_nmi_count) |
| return -1; |
| |
| printk(KERN_INFO "Testing NMI watchdog ... "); |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) |
| smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); |
| |
| for_each_possible_cpu(cpu) |
| prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count; |
| local_irq_enable(); |
| mdelay((10*1000)/nmi_hz); // wait 10 ticks |
| |
| for_each_possible_cpu(cpu) { |
| #ifdef CONFIG_SMP |
| /* Check cpu_callin_map here because that is set |
| after the timer is started. */ |
| if (!cpu_isset(cpu, cpu_callin_map)) |
| continue; |
| #endif |
| if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled) |
| continue; |
| if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { |
| printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", |
| cpu, |
| prev_nmi_count[cpu], |
| nmi_count(cpu)); |
| per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0; |
| atomic_dec(&nmi_active); |
| } |
| } |
| if (!atomic_read(&nmi_active)) { |
| kfree(prev_nmi_count); |
| atomic_set(&nmi_active, -1); |
| return -1; |
| } |
| endflag = 1; |
| printk("OK.\n"); |
| |
| /* now that we know it works we can reduce NMI frequency to |
| something more reasonable; makes a difference in some configs */ |
| if (nmi_watchdog == NMI_LOCAL_APIC) |
| nmi_hz = 1; |
| |
| kfree(prev_nmi_count); |
| return 0; |
| } |
| /* This needs to happen later in boot so counters are working */ |
| late_initcall(check_nmi_watchdog); |
| |
| static int __init setup_nmi_watchdog(char *str) |
| { |
| int nmi; |
| |
| get_option(&str, &nmi); |
| |
| if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) |
| return 0; |
| /* |
| * If any other x86 CPU has a local APIC, then |
| * please test the NMI stuff there and send me the |
| * missing bits. Right now Intel P6/P4 and AMD K7 only. |
| */ |
| if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) |
| return 0; /* no lapic support */ |
| nmi_watchdog = nmi; |
| return 1; |
| } |
| |
| __setup("nmi_watchdog=", setup_nmi_watchdog); |
| |
| static void disable_lapic_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); |
| |
| if (atomic_read(&nmi_active) <= 0) |
| return; |
| |
| on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); |
| |
| BUG_ON(atomic_read(&nmi_active) != 0); |
| } |
| |
| static void enable_lapic_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); |
| |
| /* are we already enabled */ |
| if (atomic_read(&nmi_active) != 0) |
| return; |
| |
| /* are we lapic aware */ |
| if (nmi_known_cpu() <= 0) |
| return; |
| |
| on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); |
| touch_nmi_watchdog(); |
| } |
| |
| void disable_timer_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_IO_APIC); |
| |
| if (atomic_read(&nmi_active) <= 0) |
| return; |
| |
| disable_irq(0); |
| on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); |
| |
| BUG_ON(atomic_read(&nmi_active) != 0); |
| } |
| |
| void enable_timer_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_IO_APIC); |
| |
| if (atomic_read(&nmi_active) == 0) { |
| touch_nmi_watchdog(); |
| on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); |
| enable_irq(0); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int nmi_pm_active; /* nmi_active before suspend */ |
| |
| static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| nmi_pm_active = atomic_read(&nmi_active); |
| disable_lapic_nmi_watchdog(); |
| return 0; |
| } |
| |
| static int lapic_nmi_resume(struct sys_device *dev) |
| { |
| if (nmi_pm_active > 0) |
| enable_lapic_nmi_watchdog(); |
| return 0; |
| } |
| |
| |
| static struct sysdev_class nmi_sysclass = { |
| set_kset_name("lapic_nmi"), |
| .resume = lapic_nmi_resume, |
| .suspend = lapic_nmi_suspend, |
| }; |
| |
| static struct sys_device device_lapic_nmi = { |
| .id = 0, |
| .cls = &nmi_sysclass, |
| }; |
| |
| static int __init init_lapic_nmi_sysfs(void) |
| { |
| int error; |
| |
| /* should really be a BUG_ON but b/c this is an |
| * init call, it just doesn't work. -dcz |
| */ |
| if (nmi_watchdog != NMI_LOCAL_APIC) |
| return 0; |
| |
| if ( atomic_read(&nmi_active) < 0 ) |
| return 0; |
| |
| error = sysdev_class_register(&nmi_sysclass); |
| if (!error) |
| error = sysdev_register(&device_lapic_nmi); |
| return error; |
| } |
| /* must come after the local APIC's device_initcall() */ |
| late_initcall(init_lapic_nmi_sysfs); |
| |
| #endif /* CONFIG_PM */ |
| |
| /* |
| * Activate the NMI watchdog via the local APIC. |
| * Original code written by Keith Owens. |
| */ |
| |
| static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr) |
| { |
| u64 count = (u64)cpu_khz * 1000; |
| |
| do_div(count, nmi_hz); |
| if(descr) |
| Dprintk("setting %s to -0x%08Lx\n", descr, count); |
| wrmsrl(perfctr_msr, 0 - count); |
| } |
| |
| /* Note that these events don't tick when the CPU idles. This means |
| the frequency varies with CPU load. */ |
| |
| #define K7_EVNTSEL_ENABLE (1 << 22) |
| #define K7_EVNTSEL_INT (1 << 20) |
| #define K7_EVNTSEL_OS (1 << 17) |
| #define K7_EVNTSEL_USR (1 << 16) |
| #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 |
| #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING |
| |
| static int setup_k7_watchdog(void) |
| { |
| unsigned int perfctr_msr, evntsel_msr; |
| unsigned int evntsel; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| perfctr_msr = MSR_K7_PERFCTR0; |
| evntsel_msr = MSR_K7_EVNTSEL0; |
| if (!reserve_perfctr_nmi(perfctr_msr)) |
| goto fail; |
| |
| if (!reserve_evntsel_nmi(evntsel_msr)) |
| goto fail1; |
| |
| wrmsrl(perfctr_msr, 0UL); |
| |
| evntsel = K7_EVNTSEL_INT |
| | K7_EVNTSEL_OS |
| | K7_EVNTSEL_USR |
| | K7_NMI_EVENT; |
| |
| /* setup the timer */ |
| wrmsr(evntsel_msr, evntsel, 0); |
| write_watchdog_counter(perfctr_msr, "K7_PERFCTR0"); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| evntsel |= K7_EVNTSEL_ENABLE; |
| wrmsr(evntsel_msr, evntsel, 0); |
| |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = 0; //unused |
| wd->check_bit = 1ULL<<63; |
| return 1; |
| fail1: |
| release_perfctr_nmi(perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_k7_watchdog(void) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| release_evntsel_nmi(wd->evntsel_msr); |
| release_perfctr_nmi(wd->perfctr_msr); |
| } |
| |
| #define P6_EVNTSEL0_ENABLE (1 << 22) |
| #define P6_EVNTSEL_INT (1 << 20) |
| #define P6_EVNTSEL_OS (1 << 17) |
| #define P6_EVNTSEL_USR (1 << 16) |
| #define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 |
| #define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED |
| |
| static int setup_p6_watchdog(void) |
| { |
| unsigned int perfctr_msr, evntsel_msr; |
| unsigned int evntsel; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| perfctr_msr = MSR_P6_PERFCTR0; |
| evntsel_msr = MSR_P6_EVNTSEL0; |
| if (!reserve_perfctr_nmi(perfctr_msr)) |
| goto fail; |
| |
| if (!reserve_evntsel_nmi(evntsel_msr)) |
| goto fail1; |
| |
| wrmsrl(perfctr_msr, 0UL); |
| |
| evntsel = P6_EVNTSEL_INT |
| | P6_EVNTSEL_OS |
| | P6_EVNTSEL_USR |
| | P6_NMI_EVENT; |
| |
| /* setup the timer */ |
| wrmsr(evntsel_msr, evntsel, 0); |
| write_watchdog_counter(perfctr_msr, "P6_PERFCTR0"); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| evntsel |= P6_EVNTSEL0_ENABLE; |
| wrmsr(evntsel_msr, evntsel, 0); |
| |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = 0; //unused |
| wd->check_bit = 1ULL<<39; |
| return 1; |
| fail1: |
| release_perfctr_nmi(perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_p6_watchdog(void) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| release_evntsel_nmi(wd->evntsel_msr); |
| release_perfctr_nmi(wd->perfctr_msr); |
| } |
| |
| /* Note that these events don't tick when the CPU idles. This means |
| the frequency varies with CPU load. */ |
| |
| #define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) |
| #define P4_ESCR_EVENT_SELECT(N) ((N)<<25) |
| #define P4_ESCR_OS (1<<3) |
| #define P4_ESCR_USR (1<<2) |
| #define P4_CCCR_OVF_PMI0 (1<<26) |
| #define P4_CCCR_OVF_PMI1 (1<<27) |
| #define P4_CCCR_THRESHOLD(N) ((N)<<20) |
| #define P4_CCCR_COMPLEMENT (1<<19) |
| #define P4_CCCR_COMPARE (1<<18) |
| #define P4_CCCR_REQUIRED (3<<16) |
| #define P4_CCCR_ESCR_SELECT(N) ((N)<<13) |
| #define P4_CCCR_ENABLE (1<<12) |
| #define P4_CCCR_OVF (1<<31) |
| /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter |
| CRU_ESCR0 (with any non-null event selector) through a complemented |
| max threshold. [IA32-Vol3, Section 14.9.9] */ |
| |
| static int setup_p4_watchdog(void) |
| { |
| unsigned int perfctr_msr, evntsel_msr, cccr_msr; |
| unsigned int evntsel, cccr_val; |
| unsigned int misc_enable, dummy; |
| unsigned int ht_num; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); |
| if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) |
| return 0; |
| |
| #ifdef CONFIG_SMP |
| /* detect which hyperthread we are on */ |
| if (smp_num_siblings == 2) { |
| unsigned int ebx, apicid; |
| |
| ebx = cpuid_ebx(1); |
| apicid = (ebx >> 24) & 0xff; |
| ht_num = apicid & 1; |
| } else |
| #endif |
| ht_num = 0; |
| |
| /* performance counters are shared resources |
| * assign each hyperthread its own set |
| * (re-use the ESCR0 register, seems safe |
| * and keeps the cccr_val the same) |
| */ |
| if (!ht_num) { |
| /* logical cpu 0 */ |
| perfctr_msr = MSR_P4_IQ_PERFCTR0; |
| evntsel_msr = MSR_P4_CRU_ESCR0; |
| cccr_msr = MSR_P4_IQ_CCCR0; |
| cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); |
| } else { |
| /* logical cpu 1 */ |
| perfctr_msr = MSR_P4_IQ_PERFCTR1; |
| evntsel_msr = MSR_P4_CRU_ESCR0; |
| cccr_msr = MSR_P4_IQ_CCCR1; |
| cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); |
| } |
| |
| if (!reserve_perfctr_nmi(perfctr_msr)) |
| goto fail; |
| |
| if (!reserve_evntsel_nmi(evntsel_msr)) |
| goto fail1; |
| |
| evntsel = P4_ESCR_EVENT_SELECT(0x3F) |
| | P4_ESCR_OS |
| | P4_ESCR_USR; |
| |
| cccr_val |= P4_CCCR_THRESHOLD(15) |
| | P4_CCCR_COMPLEMENT |
| | P4_CCCR_COMPARE |
| | P4_CCCR_REQUIRED; |
| |
| wrmsr(evntsel_msr, evntsel, 0); |
| wrmsr(cccr_msr, cccr_val, 0); |
| write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0"); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| cccr_val |= P4_CCCR_ENABLE; |
| wrmsr(cccr_msr, cccr_val, 0); |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = cccr_msr; |
| wd->check_bit = 1ULL<<39; |
| return 1; |
| fail1: |
| release_perfctr_nmi(perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_p4_watchdog(void) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| wrmsr(wd->cccr_msr, 0, 0); |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| release_evntsel_nmi(wd->evntsel_msr); |
| release_perfctr_nmi(wd->perfctr_msr); |
| } |
| |
| void setup_apic_nmi_watchdog (void *unused) |
| { |
| /* only support LOCAL and IO APICs for now */ |
| if ((nmi_watchdog != NMI_LOCAL_APIC) && |
| (nmi_watchdog != NMI_IO_APIC)) |
| return; |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) |
| return; |
| if (!setup_k7_watchdog()) |
| return; |
| break; |
| case X86_VENDOR_INTEL: |
| switch (boot_cpu_data.x86) { |
| case 6: |
| if (boot_cpu_data.x86_model > 0xd) |
| return; |
| |
| if (!setup_p6_watchdog()) |
| return; |
| break; |
| case 15: |
| if (boot_cpu_data.x86_model > 0x4) |
| return; |
| |
| if (!setup_p4_watchdog()) |
| return; |
| break; |
| default: |
| return; |
| } |
| break; |
| default: |
| return; |
| } |
| } |
| __get_cpu_var(nmi_watchdog_ctlblk.enabled) = 1; |
| atomic_inc(&nmi_active); |
| } |
| |
| static void stop_apic_nmi_watchdog(void *unused) |
| { |
| /* only support LOCAL and IO APICs for now */ |
| if ((nmi_watchdog != NMI_LOCAL_APIC) && |
| (nmi_watchdog != NMI_IO_APIC)) |
| return; |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| stop_k7_watchdog(); |
| break; |
| case X86_VENDOR_INTEL: |
| switch (boot_cpu_data.x86) { |
| case 6: |
| if (boot_cpu_data.x86_model > 0xd) |
| break; |
| stop_p6_watchdog(); |
| break; |
| case 15: |
| if (boot_cpu_data.x86_model > 0x4) |
| break; |
| stop_p4_watchdog(); |
| break; |
| } |
| break; |
| default: |
| return; |
| } |
| } |
| __get_cpu_var(nmi_watchdog_ctlblk.enabled) = 0; |
| atomic_dec(&nmi_active); |
| } |
| |
| /* |
| * the best way to detect whether a CPU has a 'hard lockup' problem |
| * is to check it's local APIC timer IRQ counts. If they are not |
| * changing then that CPU has some problem. |
| * |
| * as these watchdog NMI IRQs are generated on every CPU, we only |
| * have to check the current processor. |
| * |
| * since NMIs don't listen to _any_ locks, we have to be extremely |
| * careful not to rely on unsafe variables. The printk might lock |
| * up though, so we have to break up any console locks first ... |
| * [when there will be more tty-related locks, break them up |
| * here too!] |
| */ |
| |
| static unsigned int |
| last_irq_sums [NR_CPUS], |
| alert_counter [NR_CPUS]; |
| |
| void touch_nmi_watchdog (void) |
| { |
| int i; |
| |
| /* |
| * Just reset the alert counters, (other CPUs might be |
| * spinning on locks we hold): |
| */ |
| for_each_possible_cpu(i) |
| alert_counter[i] = 0; |
| |
| /* |
| * Tickle the softlockup detector too: |
| */ |
| touch_softlockup_watchdog(); |
| } |
| EXPORT_SYMBOL(touch_nmi_watchdog); |
| |
| extern void die_nmi(struct pt_regs *, const char *msg); |
| |
| int nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) |
| { |
| |
| /* |
| * Since current_thread_info()-> is always on the stack, and we |
| * always switch the stack NMI-atomically, it's safe to use |
| * smp_processor_id(). |
| */ |
| unsigned int sum; |
| int touched = 0; |
| int cpu = smp_processor_id(); |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| u64 dummy; |
| int rc=0; |
| |
| /* check for other users first */ |
| if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) |
| == NOTIFY_STOP) { |
| rc = 1; |
| touched = 1; |
| } |
| |
| sum = per_cpu(irq_stat, cpu).apic_timer_irqs; |
| |
| /* if the apic timer isn't firing, this cpu isn't doing much */ |
| if (!touched && last_irq_sums[cpu] == sum) { |
| /* |
| * Ayiee, looks like this CPU is stuck ... |
| * wait a few IRQs (5 seconds) before doing the oops ... |
| */ |
| alert_counter[cpu]++; |
| if (alert_counter[cpu] == 5*nmi_hz) |
| /* |
| * die_nmi will return ONLY if NOTIFY_STOP happens.. |
| */ |
| die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); |
| } else { |
| last_irq_sums[cpu] = sum; |
| alert_counter[cpu] = 0; |
| } |
| /* see if the nmi watchdog went off */ |
| if (wd->enabled) { |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| rdmsrl(wd->perfctr_msr, dummy); |
| if (dummy & wd->check_bit){ |
| /* this wasn't a watchdog timer interrupt */ |
| goto done; |
| } |
| |
| /* only Intel P4 uses the cccr msr */ |
| if (wd->cccr_msr != 0) { |
| /* |
| * P4 quirks: |
| * - An overflown perfctr will assert its interrupt |
| * until the OVF flag in its CCCR is cleared. |
| * - LVTPC is masked on interrupt and must be |
| * unmasked by the LVTPC handler. |
| */ |
| rdmsrl(wd->cccr_msr, dummy); |
| dummy &= ~P4_CCCR_OVF; |
| wrmsrl(wd->cccr_msr, dummy); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| } |
| else if (wd->perfctr_msr == MSR_P6_PERFCTR0) { |
| /* Only P6 based Pentium M need to re-unmask |
| * the apic vector but it doesn't hurt |
| * other P6 variant */ |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| } |
| /* start the cycle over again */ |
| write_watchdog_counter(wd->perfctr_msr, NULL); |
| rc = 1; |
| } else if (nmi_watchdog == NMI_IO_APIC) { |
| /* don't know how to accurately check for this. |
| * just assume it was a watchdog timer interrupt |
| * This matches the old behaviour. |
| */ |
| rc = 1; |
| } else |
| printk(KERN_WARNING "Unknown enabled NMI hardware?!\n"); |
| } |
| done: |
| return rc; |
| } |
| |
| int do_nmi_callback(struct pt_regs * regs, int cpu) |
| { |
| #ifdef CONFIG_SYSCTL |
| if (unknown_nmi_panic) |
| return unknown_nmi_panic_callback(regs, cpu); |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_SYSCTL |
| |
| static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) |
| { |
| unsigned char reason = get_nmi_reason(); |
| char buf[64]; |
| |
| sprintf(buf, "NMI received for unknown reason %02x\n", reason); |
| die_nmi(regs, buf); |
| return 0; |
| } |
| |
| #endif |
| |
| EXPORT_SYMBOL(nmi_active); |
| EXPORT_SYMBOL(nmi_watchdog); |
| EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); |
| EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); |
| EXPORT_SYMBOL(reserve_perfctr_nmi); |
| EXPORT_SYMBOL(release_perfctr_nmi); |
| EXPORT_SYMBOL(reserve_evntsel_nmi); |
| EXPORT_SYMBOL(release_evntsel_nmi); |
| EXPORT_SYMBOL(disable_timer_nmi_watchdog); |
| EXPORT_SYMBOL(enable_timer_nmi_watchdog); |