arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi - SHIFTPHONES/mainline/linux - Gitiles

 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright 2019-2021 TQ-Systems GmbH
  */

 #include "imx8mq.dtsi"

 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
 	compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";

 	memory@40000000 {
 		device_type = "memory";
 		/*  our minimum RAM config will be 1024 MiB */
 		reg = <0x00000000 0x40000000 0 0x40000000>;
 	};

 	/* e-MMC IO, needed for HS modes */
 	reg_vcc1v8: regulator-vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "TQMA8MX_VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};

 	reg_vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "TQMA8MX_VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	reg_vdd_arm: regulator-vdd-arm {
 		compatible = "regulator-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_dvfs>;
 		regulator-min-microvolt = <900000>;
 		regulator-max-microvolt = <1000000>;
 		regulator-name = "TQMa8Mx_DVFS";
 		regulator-type = "voltage";
 		regulator-settling-time-us = <150000>;
 		gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		states = <900000 0x1 1000000 0x0>;
 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		/* global autoconfigured region for contiguous allocations */
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
 			/* 640 MiB */
 			size = <0 0x28000000>;
 			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
 			alloc-ranges = <0 0x40000000 0 0x78000000>;
 			linux,cma-default;
 		};
 	};
 };

 &A53_0 {
 	cpu-supply = <&reg_vdd_arm>;
 };

 &A53_1 {
 	cpu-supply = <&reg_vdd_arm>;
 };

 &A53_2 {
 	cpu-supply = <&reg_vdd_arm>;
 };

 &A53_3 {
 	cpu-supply = <&reg_vdd_arm>;
 };

 &gpu {
 	status = "okay";
 };

 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };

 &pgc_vpu {
 	power-supply = <&sw1c_reg>;
 };

 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";

 	pfuze100: pmic@8 {
 		compatible = "fsl,pfuze100";
 		fsl,pfuze-support-disable-sw;
 		reg = <0x8>;

 		regulators {
 			/* VDD_GPU */
 			sw1a_reg: sw1ab {
 				regulator-min-microvolt = <825000>;
 				regulator-max-microvolt = <1100000>;
 			};

 			/* VDD_VPU */
 			sw1c_reg: sw1c {
 				regulator-min-microvolt = <825000>;
 				regulator-max-microvolt = <1100000>;
 			};

 			/* NVCC_DRAM */
 			sw2_reg: sw2 {
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};

 			/* VDD_DRAM */
 			sw3a_reg: sw3ab {
 				regulator-min-microvolt = <825000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};

 			/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
 			nvcc_1v8_reg: sw4 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};

 			swbst_reg: swbst {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5150000>;
 			};

 			snvs_reg: vsnvs {
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
 			};

 			vref_reg: vrefddr {
 				regulator-always-on;
 			};

 			/* not used */
 			vgen1_reg: vgen1 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1550000>;
 			};

 			/* VDD_PHY_0V9 */
 			vgen2_reg: vgen2 {
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <975000>;
 				regulator-always-on;
 			};

 			/* VDD_PHY_1V8 */
 			vgen3_reg: vgen3 {
 				regulator-min-microvolt = <1675000>;
 				regulator-max-microvolt = <1975000>;
 				regulator-always-on;
 			};

 			/* VDDA_1V8 */
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1625000>;
 				regulator-max-microvolt = <1875000>;
 				regulator-always-on;
 			};

 			/* VDD_PHY_3V3 */
 			vgen5_reg: vgen5 {
 				regulator-min-microvolt = <3075000>;
 				regulator-max-microvolt = <3625000>;
 				regulator-always-on;
 			};

 			/* not used */
 			vgen6_reg: vgen6 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
 		};
 	};

 	sensor0: temperature-sensor-eeprom@1b {
 		compatible = "nxp,se97", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};

 	pcf85063: rtc@51 {
 		compatible = "nxp,pcf85063a";
 		reg = <0x51>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
 		interrupt-names = "irq";
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		quartz-load-femtofarads = <7000>;

 		clock {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 	};

 	eeprom1: eeprom@53 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		read-only;
 	};

 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
 	};
 };

 &pcie0 {
 	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
 	vph-supply = <&vgen5_reg>;
 };

 &pcie1 {
 	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
 	vph-supply = <&vgen5_reg>;
 };

 &qspi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
 	assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
 	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
 	status = "okay";

 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 	};
 };

 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc1v8>;
 	status = "okay";
 };

 &vpu {
 	status = "okay";
 };

 /* Attention: wdog reset forcing POR needs baseboard support */
 &wdog1 {
 	status = "okay";
 };

 &iomuxc {
 	pinctrl_dvfs: dvfsgrp {
 		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x16>;
 	};

 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000007f>,
 			   <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000007f>;
 	};

 	pinctrl_i2c1_gpio: i2c1gpiogrp {
 		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000074>,
 			   <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000074>;
 	};

 	pinctrl_qspi: qspigrp {
 		fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x97>,
 			   <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
 			   <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x97>,
 			   <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x97>,
 			   <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x97>,
 			   <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x97>;
 	};

 	pinctrl_rtc: rtcgrp {
 		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x41>;
 	};

 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x83>,
 			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3>,
 			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x83>,
 			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
 	};

 	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x85>,
 			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5>,
 			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x85>,
 			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
 	};

 	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x87>,
 			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7>,
 			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x87>,
 			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
 	};

 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6>;
 	};
 };
	// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
	/*
	* Copyright 2019-2021 TQ-Systems GmbH
	*/

	#include "imx8mq.dtsi"

	/ {
	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
	compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";

	memory@40000000 {
	device_type = "memory";
	/* our minimum RAM config will be 1024 MiB */
	reg = <0x00000000 0x40000000 0 0x40000000>;
	};

	/* e-MMC IO, needed for HS modes */
	reg_vcc1v8: regulator-vcc1v8 {
	compatible = "regulator-fixed";
	regulator-name = "TQMA8MX_VCC1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	reg_vcc3v3: regulator-vcc3v3 {
	compatible = "regulator-fixed";
	regulator-name = "TQMA8MX_VCC3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	reg_vdd_arm: regulator-vdd-arm {
	compatible = "regulator-gpio";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_dvfs>;
	regulator-min-microvolt = <900000>;
	regulator-max-microvolt = <1000000>;
	regulator-name = "TQMa8Mx_DVFS";
	regulator-type = "voltage";
	regulator-settling-time-us = <150000>;
	gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	states = <900000 0x1 1000000 0x0>;
	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	/* global autoconfigured region for contiguous allocations */
	linux,cma {
	compatible = "shared-dma-pool";
	reusable;
	/* 640 MiB */
	size = <0 0x28000000>;
	/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
	alloc-ranges = <0 0x40000000 0 0x78000000>;
	linux,cma-default;
	};
	};
	};

	&A53_0 {
	cpu-supply = <&reg_vdd_arm>;
	};

	&A53_1 {
	cpu-supply = <&reg_vdd_arm>;
	};

	&A53_2 {
	cpu-supply = <&reg_vdd_arm>;
	};

	&A53_3 {
	cpu-supply = <&reg_vdd_arm>;
	};

	&gpu {
	status = "okay";
	};

	&pgc_gpu {
	power-supply = <&sw1a_reg>;
	};

	&pgc_vpu {
	power-supply = <&sw1c_reg>;
	};

	&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c1>;
	pinctrl-1 = <&pinctrl_i2c1_gpio>;
	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	status = "okay";

	pfuze100: pmic@8 {
	compatible = "fsl,pfuze100";
	fsl,pfuze-support-disable-sw;
	reg = <0x8>;

	regulators {
	/* VDD_GPU */
	sw1a_reg: sw1ab {
	regulator-min-microvolt = <825000>;
	regulator-max-microvolt = <1100000>;
	};

	/* VDD_VPU */
	sw1c_reg: sw1c {
	regulator-min-microvolt = <825000>;
	regulator-max-microvolt = <1100000>;
	};

	/* NVCC_DRAM */
	sw2_reg: sw2 {
	regulator-min-microvolt = <1100000>;
	regulator-max-microvolt = <1100000>;
	regulator-always-on;
	};

	/* VDD_DRAM */
	sw3a_reg: sw3ab {
	regulator-min-microvolt = <825000>;
	regulator-max-microvolt = <1100000>;
	regulator-always-on;
	};

	/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
	nvcc_1v8_reg: sw4 {
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	swbst_reg: swbst {
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5150000>;
	};

	snvs_reg: vsnvs {
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on;
	};

	vref_reg: vrefddr {
	regulator-always-on;
	};

	/* not used */
	vgen1_reg: vgen1 {
	regulator-min-microvolt = <800000>;
	regulator-max-microvolt = <1550000>;
	};

	/* VDD_PHY_0V9 */
	vgen2_reg: vgen2 {
	regulator-min-microvolt = <850000>;
	regulator-max-microvolt = <975000>;
	regulator-always-on;
	};

	/* VDD_PHY_1V8 */
	vgen3_reg: vgen3 {
	regulator-min-microvolt = <1675000>;
	regulator-max-microvolt = <1975000>;
	regulator-always-on;
	};

	/* VDDA_1V8 */
	vgen4_reg: vgen4 {
	regulator-min-microvolt = <1625000>;
	regulator-max-microvolt = <1875000>;
	regulator-always-on;
	};

	/* VDD_PHY_3V3 */
	vgen5_reg: vgen5 {
	regulator-min-microvolt = <3075000>;
	regulator-max-microvolt = <3625000>;
	regulator-always-on;
	};

	/* not used */
	vgen6_reg: vgen6 {
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	};
	};
	};

	sensor0: temperature-sensor-eeprom@1b {
	compatible = "nxp,se97", "jedec,jc-42.4-temp";
	reg = <0x1b>;
	};

	pcf85063: rtc@51 {
	compatible = "nxp,pcf85063a";
	reg = <0x51>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rtc>;
	interrupt-names = "irq";
	interrupt-parent = <&gpio1>;
	interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
	quartz-load-femtofarads = <7000>;

	clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <32768>;
	};
	};

	eeprom1: eeprom@53 {
	compatible = "nxp,se97b", "atmel,24c02";
	reg = <0x53>;
	pagesize = <16>;
	read-only;
	};

	eeprom0: eeprom@57 {
	compatible = "atmel,24c64";
	reg = <0x57>;
	pagesize = <32>;
	};
	};

	&pcie0 {
	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
	vph-supply = <&vgen5_reg>;
	};

	&pcie1 {
	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
	vph-supply = <&vgen5_reg>;
	};

	&qspi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi>;
	assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
	status = "okay";

	flash0: flash@0 {
	compatible = "jedec,spi-nor";
	reg = <0>;
	#address-cells = <1>;
	#size-cells = <1>;
	spi-max-frequency = <84000000>;
	spi-tx-bus-width = <4>;
	spi-rx-bus-width = <4>;
	};
	};

	&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	bus-width = <8>;
	non-removable;
	no-sd;
	no-sdio;
	vmmc-supply = <&reg_vcc3v3>;
	vqmmc-supply = <&reg_vcc1v8>;
	status = "okay";
	};

	&vpu {
	status = "okay";
	};

	/* Attention: wdog reset forcing POR needs baseboard support */
	&wdog1 {
	status = "okay";
	};

	&iomuxc {
	pinctrl_dvfs: dvfsgrp {
	fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16>;
	};

	pinctrl_i2c1: i2c1grp {
	fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f>,
	<MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f>;
	};

	pinctrl_i2c1_gpio: i2c1gpiogrp {
	fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074>,
	<MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074>;
	};

	pinctrl_qspi: qspigrp {
	fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97>,
	<MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
	<MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97>,
	<MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97>,
	<MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97>,
	<MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97>;
	};

	pinctrl_rtc: rtcgrp {
	fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41>;
	};

	pinctrl_usdhc1: usdhc1grp {
	fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83>,
	<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3>,
	<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3>,
	<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83>,
	<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
	};

	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
	fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85>,
	<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5>,
	<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5>,
	<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85>,
	<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
	};

	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
	fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87>,
	<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7>,
	<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7>,
	<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87>,
	<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
	};

	pinctrl_wdog: wdoggrp {
	fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>;
	};
	};