| #if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
| #define SUPPORT_SYSRQ |
| #endif |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/console.h> |
| #include <linux/sysrq.h> |
| #include <linux/serial_core.h> |
| #include <linux/tty_flip.h> |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include <linux/platform_data/efm32-uart.h> |
| |
| #define DRIVER_NAME "efm32-uart" |
| #define DEV_NAME "ttyefm" |
| |
| #define UARTn_CTRL 0x00 |
| #define UARTn_CTRL_SYNC 0x0001 |
| #define UARTn_CTRL_TXBIL 0x1000 |
| |
| #define UARTn_FRAME 0x04 |
| #define UARTn_FRAME_DATABITS__MASK 0x000f |
| #define UARTn_FRAME_DATABITS(n) ((n) - 3) |
| #define UARTn_FRAME_PARITY_NONE 0x0000 |
| #define UARTn_FRAME_PARITY_EVEN 0x0200 |
| #define UARTn_FRAME_PARITY_ODD 0x0300 |
| #define UARTn_FRAME_STOPBITS_HALF 0x0000 |
| #define UARTn_FRAME_STOPBITS_ONE 0x1000 |
| #define UARTn_FRAME_STOPBITS_TWO 0x3000 |
| |
| #define UARTn_CMD 0x0c |
| #define UARTn_CMD_RXEN 0x0001 |
| #define UARTn_CMD_RXDIS 0x0002 |
| #define UARTn_CMD_TXEN 0x0004 |
| #define UARTn_CMD_TXDIS 0x0008 |
| |
| #define UARTn_STATUS 0x10 |
| #define UARTn_STATUS_TXENS 0x0002 |
| #define UARTn_STATUS_TXC 0x0020 |
| #define UARTn_STATUS_TXBL 0x0040 |
| #define UARTn_STATUS_RXDATAV 0x0080 |
| |
| #define UARTn_CLKDIV 0x14 |
| |
| #define UARTn_RXDATAX 0x18 |
| #define UARTn_RXDATAX_RXDATA__MASK 0x01ff |
| #define UARTn_RXDATAX_PERR 0x4000 |
| #define UARTn_RXDATAX_FERR 0x8000 |
| /* |
| * This is a software only flag used for ignore_status_mask and |
| * read_status_mask! It's used for breaks that the hardware doesn't report |
| * explicitly. |
| */ |
| #define SW_UARTn_RXDATAX_BERR 0x2000 |
| |
| #define UARTn_TXDATA 0x34 |
| |
| #define UARTn_IF 0x40 |
| #define UARTn_IF_TXC 0x0001 |
| #define UARTn_IF_TXBL 0x0002 |
| #define UARTn_IF_RXDATAV 0x0004 |
| #define UARTn_IF_RXOF 0x0010 |
| |
| #define UARTn_IFS 0x44 |
| #define UARTn_IFC 0x48 |
| #define UARTn_IEN 0x4c |
| |
| #define UARTn_ROUTE 0x54 |
| #define UARTn_ROUTE_LOCATION__MASK 0x0700 |
| #define UARTn_ROUTE_LOCATION(n) (((n) << 8) & UARTn_ROUTE_LOCATION__MASK) |
| #define UARTn_ROUTE_RXPEN 0x0001 |
| #define UARTn_ROUTE_TXPEN 0x0002 |
| |
| struct efm32_uart_port { |
| struct uart_port port; |
| unsigned int txirq; |
| struct clk *clk; |
| }; |
| #define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port) |
| #define efm_debug(efm_port, format, arg...) \ |
| dev_dbg(efm_port->port.dev, format, ##arg) |
| |
| static void efm32_uart_write32(struct efm32_uart_port *efm_port, |
| u32 value, unsigned offset) |
| { |
| writel_relaxed(value, efm_port->port.membase + offset); |
| } |
| |
| static u32 efm32_uart_read32(struct efm32_uart_port *efm_port, |
| unsigned offset) |
| { |
| return readl_relaxed(efm_port->port.membase + offset); |
| } |
| |
| static unsigned int efm32_uart_tx_empty(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); |
| |
| if (status & UARTn_STATUS_TXC) |
| return TIOCSER_TEMT; |
| else |
| return 0; |
| } |
| |
| static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| { |
| /* sorry, neither handshaking lines nor loop functionallity */ |
| } |
| |
| static unsigned int efm32_uart_get_mctrl(struct uart_port *port) |
| { |
| /* sorry, no handshaking lines available */ |
| return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; |
| } |
| |
| static void efm32_uart_stop_tx(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| u32 ien = efm32_uart_read32(efm_port, UARTn_IEN); |
| |
| efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); |
| ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL); |
| efm32_uart_write32(efm_port, ien, UARTn_IEN); |
| } |
| |
| static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port) |
| { |
| struct uart_port *port = &efm_port->port; |
| struct circ_buf *xmit = &port->state->xmit; |
| |
| while (efm32_uart_read32(efm_port, UARTn_STATUS) & |
| UARTn_STATUS_TXBL) { |
| if (port->x_char) { |
| port->icount.tx++; |
| efm32_uart_write32(efm_port, port->x_char, |
| UARTn_TXDATA); |
| port->x_char = 0; |
| continue; |
| } |
| if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { |
| port->icount.tx++; |
| efm32_uart_write32(efm_port, xmit->buf[xmit->tail], |
| UARTn_TXDATA); |
| xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| } else |
| break; |
| } |
| |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(port); |
| |
| if (!port->x_char && uart_circ_empty(xmit) && |
| efm32_uart_read32(efm_port, UARTn_STATUS) & |
| UARTn_STATUS_TXC) |
| efm32_uart_stop_tx(port); |
| } |
| |
| static void efm32_uart_start_tx(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| u32 ien; |
| |
| efm32_uart_write32(efm_port, |
| UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC); |
| ien = efm32_uart_read32(efm_port, UARTn_IEN); |
| efm32_uart_write32(efm_port, |
| ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN); |
| efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); |
| |
| efm32_uart_tx_chars(efm_port); |
| } |
| |
| static void efm32_uart_stop_rx(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| |
| efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD); |
| } |
| |
| static void efm32_uart_enable_ms(struct uart_port *port) |
| { |
| /* no handshake lines, no modem status interrupts */ |
| } |
| |
| static void efm32_uart_break_ctl(struct uart_port *port, int ctl) |
| { |
| /* not possible without fiddling with gpios */ |
| } |
| |
| static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port, |
| struct tty_struct *tty) |
| { |
| struct uart_port *port = &efm_port->port; |
| |
| while (efm32_uart_read32(efm_port, UARTn_STATUS) & |
| UARTn_STATUS_RXDATAV) { |
| u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX); |
| int flag = 0; |
| |
| /* |
| * This is a reserved bit and I only saw it read as 0. But to be |
| * sure not to be confused too much by new devices adhere to the |
| * warning in the reference manual that reserverd bits might |
| * read as 1 in the future. |
| */ |
| rxdata &= ~SW_UARTn_RXDATAX_BERR; |
| |
| port->icount.rx++; |
| |
| if ((rxdata & UARTn_RXDATAX_FERR) && |
| !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) { |
| rxdata |= SW_UARTn_RXDATAX_BERR; |
| port->icount.brk++; |
| if (uart_handle_break(port)) |
| continue; |
| } else if (rxdata & UARTn_RXDATAX_PERR) |
| port->icount.parity++; |
| else if (rxdata & UARTn_RXDATAX_FERR) |
| port->icount.frame++; |
| |
| rxdata &= port->read_status_mask; |
| |
| if (rxdata & SW_UARTn_RXDATAX_BERR) |
| flag = TTY_BREAK; |
| else if (rxdata & UARTn_RXDATAX_PERR) |
| flag = TTY_PARITY; |
| else if (rxdata & UARTn_RXDATAX_FERR) |
| flag = TTY_FRAME; |
| else if (uart_handle_sysrq_char(port, |
| rxdata & UARTn_RXDATAX_RXDATA__MASK)) |
| continue; |
| |
| if (tty && (rxdata & port->ignore_status_mask) == 0) |
| tty_insert_flip_char(tty, |
| rxdata & UARTn_RXDATAX_RXDATA__MASK, flag); |
| } |
| } |
| |
| static irqreturn_t efm32_uart_rxirq(int irq, void *data) |
| { |
| struct efm32_uart_port *efm_port = data; |
| u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); |
| int handled = IRQ_NONE; |
| struct uart_port *port = &efm_port->port; |
| struct tty_struct *tty; |
| |
| spin_lock(&port->lock); |
| |
| tty = tty_kref_get(port->state->port.tty); |
| |
| if (irqflag & UARTn_IF_RXDATAV) { |
| efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC); |
| efm32_uart_rx_chars(efm_port, tty); |
| |
| handled = IRQ_HANDLED; |
| } |
| |
| if (irqflag & UARTn_IF_RXOF) { |
| efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC); |
| port->icount.overrun++; |
| if (tty) |
| tty_insert_flip_char(tty, 0, TTY_OVERRUN); |
| |
| handled = IRQ_HANDLED; |
| } |
| |
| if (tty) { |
| tty_flip_buffer_push(tty); |
| tty_kref_put(tty); |
| } |
| |
| spin_unlock(&port->lock); |
| |
| return handled; |
| } |
| |
| static irqreturn_t efm32_uart_txirq(int irq, void *data) |
| { |
| struct efm32_uart_port *efm_port = data; |
| u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); |
| |
| /* TXBL doesn't need to be cleared */ |
| if (irqflag & UARTn_IF_TXC) |
| efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC); |
| |
| if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) { |
| efm32_uart_tx_chars(efm_port); |
| return IRQ_HANDLED; |
| } else |
| return IRQ_NONE; |
| } |
| |
| static int efm32_uart_startup(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| u32 location = 0; |
| struct efm32_uart_pdata *pdata = dev_get_platdata(port->dev); |
| int ret; |
| |
| if (pdata) |
| location = UARTn_ROUTE_LOCATION(pdata->location); |
| |
| ret = clk_enable(efm_port->clk); |
| if (ret) { |
| efm_debug(efm_port, "failed to enable clk\n"); |
| goto err_clk_enable; |
| } |
| port->uartclk = clk_get_rate(efm_port->clk); |
| |
| /* Enable pins at configured location */ |
| efm32_uart_write32(efm_port, location | UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN, |
| UARTn_ROUTE); |
| |
| ret = request_irq(port->irq, efm32_uart_rxirq, 0, |
| DRIVER_NAME, efm_port); |
| if (ret) { |
| efm_debug(efm_port, "failed to register rxirq\n"); |
| goto err_request_irq_rx; |
| } |
| |
| /* disable all irqs */ |
| efm32_uart_write32(efm_port, 0, UARTn_IEN); |
| |
| ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0, |
| DRIVER_NAME, efm_port); |
| if (ret) { |
| efm_debug(efm_port, "failed to register txirq\n"); |
| free_irq(port->irq, efm_port); |
| err_request_irq_rx: |
| |
| clk_disable(efm_port->clk); |
| } else { |
| efm32_uart_write32(efm_port, |
| UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN); |
| efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD); |
| } |
| |
| err_clk_enable: |
| return ret; |
| } |
| |
| static void efm32_uart_shutdown(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| |
| efm32_uart_write32(efm_port, 0, UARTn_IEN); |
| free_irq(port->irq, efm_port); |
| |
| clk_disable(efm_port->clk); |
| } |
| |
| static void efm32_uart_set_termios(struct uart_port *port, |
| struct ktermios *new, struct ktermios *old) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| unsigned long flags; |
| unsigned baud; |
| u32 clkdiv; |
| u32 frame = 0; |
| |
| /* no modem control lines */ |
| new->c_cflag &= ~(CRTSCTS | CMSPAR); |
| |
| baud = uart_get_baud_rate(port, new, old, |
| DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192), |
| DIV_ROUND_CLOSEST(port->uartclk, 16)); |
| |
| switch (new->c_cflag & CSIZE) { |
| case CS5: |
| frame |= UARTn_FRAME_DATABITS(5); |
| break; |
| case CS6: |
| frame |= UARTn_FRAME_DATABITS(6); |
| break; |
| case CS7: |
| frame |= UARTn_FRAME_DATABITS(7); |
| break; |
| case CS8: |
| frame |= UARTn_FRAME_DATABITS(8); |
| break; |
| } |
| |
| if (new->c_cflag & CSTOPB) |
| /* the receiver only verifies the first stop bit */ |
| frame |= UARTn_FRAME_STOPBITS_TWO; |
| else |
| frame |= UARTn_FRAME_STOPBITS_ONE; |
| |
| if (new->c_cflag & PARENB) { |
| if (new->c_cflag & PARODD) |
| frame |= UARTn_FRAME_PARITY_ODD; |
| else |
| frame |= UARTn_FRAME_PARITY_EVEN; |
| } else |
| frame |= UARTn_FRAME_PARITY_NONE; |
| |
| /* |
| * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25. |
| * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow. |
| */ |
| clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| |
| efm32_uart_write32(efm_port, |
| UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD); |
| |
| port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK; |
| if (new->c_iflag & INPCK) |
| port->read_status_mask |= |
| UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; |
| if (new->c_iflag & (BRKINT | PARMRK)) |
| port->read_status_mask |= SW_UARTn_RXDATAX_BERR; |
| |
| port->ignore_status_mask = 0; |
| if (new->c_iflag & IGNPAR) |
| port->ignore_status_mask |= |
| UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; |
| if (new->c_iflag & IGNBRK) |
| port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR; |
| |
| uart_update_timeout(port, new->c_cflag, baud); |
| |
| efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL); |
| efm32_uart_write32(efm_port, frame, UARTn_FRAME); |
| efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV); |
| |
| efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN, |
| UARTn_CMD); |
| |
| spin_unlock_irqrestore(&port->lock, flags); |
| } |
| |
| static const char *efm32_uart_type(struct uart_port *port) |
| { |
| return port->type == PORT_EFMUART ? "efm32-uart" : NULL; |
| } |
| |
| static void efm32_uart_release_port(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| |
| clk_unprepare(efm_port->clk); |
| clk_put(efm_port->clk); |
| iounmap(port->membase); |
| } |
| |
| static int efm32_uart_request_port(struct uart_port *port) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| int ret; |
| |
| port->membase = ioremap(port->mapbase, 60); |
| if (!efm_port->port.membase) { |
| ret = -ENOMEM; |
| efm_debug(efm_port, "failed to remap\n"); |
| goto err_ioremap; |
| } |
| |
| efm_port->clk = clk_get(port->dev, NULL); |
| if (IS_ERR(efm_port->clk)) { |
| ret = PTR_ERR(efm_port->clk); |
| efm_debug(efm_port, "failed to get clock\n"); |
| goto err_clk_get; |
| } |
| |
| ret = clk_prepare(efm_port->clk); |
| if (ret) { |
| clk_put(efm_port->clk); |
| err_clk_get: |
| |
| iounmap(port->membase); |
| err_ioremap: |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void efm32_uart_config_port(struct uart_port *port, int type) |
| { |
| if (type & UART_CONFIG_TYPE && |
| !efm32_uart_request_port(port)) |
| port->type = PORT_EFMUART; |
| } |
| |
| static int efm32_uart_verify_port(struct uart_port *port, |
| struct serial_struct *serinfo) |
| { |
| int ret = 0; |
| |
| if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART) |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static struct uart_ops efm32_uart_pops = { |
| .tx_empty = efm32_uart_tx_empty, |
| .set_mctrl = efm32_uart_set_mctrl, |
| .get_mctrl = efm32_uart_get_mctrl, |
| .stop_tx = efm32_uart_stop_tx, |
| .start_tx = efm32_uart_start_tx, |
| .stop_rx = efm32_uart_stop_rx, |
| .enable_ms = efm32_uart_enable_ms, |
| .break_ctl = efm32_uart_break_ctl, |
| .startup = efm32_uart_startup, |
| .shutdown = efm32_uart_shutdown, |
| .set_termios = efm32_uart_set_termios, |
| .type = efm32_uart_type, |
| .release_port = efm32_uart_release_port, |
| .request_port = efm32_uart_request_port, |
| .config_port = efm32_uart_config_port, |
| .verify_port = efm32_uart_verify_port, |
| }; |
| |
| static struct efm32_uart_port *efm32_uart_ports[5]; |
| |
| #ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE |
| static void efm32_uart_console_putchar(struct uart_port *port, int ch) |
| { |
| struct efm32_uart_port *efm_port = to_efm_port(port); |
| unsigned int timeout = 0x400; |
| u32 status; |
| |
| while (1) { |
| status = efm32_uart_read32(efm_port, UARTn_STATUS); |
| |
| if (status & UARTn_STATUS_TXBL) |
| break; |
| if (!timeout--) |
| return; |
| } |
| efm32_uart_write32(efm_port, ch, UARTn_TXDATA); |
| } |
| |
| static void efm32_uart_console_write(struct console *co, const char *s, |
| unsigned int count) |
| { |
| struct efm32_uart_port *efm_port = efm32_uart_ports[co->index]; |
| u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); |
| unsigned int timeout = 0x400; |
| |
| if (!(status & UARTn_STATUS_TXENS)) |
| efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); |
| |
| uart_console_write(&efm_port->port, s, count, |
| efm32_uart_console_putchar); |
| |
| /* Wait for the transmitter to become empty */ |
| while (1) { |
| u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); |
| if (status & UARTn_STATUS_TXC) |
| break; |
| if (!timeout--) |
| break; |
| } |
| |
| if (!(status & UARTn_STATUS_TXENS)) |
| efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); |
| } |
| |
| static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port, |
| int *baud, int *parity, int *bits) |
| { |
| u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL); |
| u32 route, clkdiv, frame; |
| |
| if (ctrl & UARTn_CTRL_SYNC) |
| /* not operating in async mode */ |
| return; |
| |
| route = efm32_uart_read32(efm_port, UARTn_ROUTE); |
| if (!(route & UARTn_ROUTE_TXPEN)) |
| /* tx pin not routed */ |
| return; |
| |
| clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV); |
| |
| *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk, |
| 16 * (4 + (clkdiv >> 6))); |
| |
| frame = efm32_uart_read32(efm_port, UARTn_FRAME); |
| if (frame & UARTn_FRAME_PARITY_ODD) |
| *parity = 'o'; |
| else if (frame & UARTn_FRAME_PARITY_EVEN) |
| *parity = 'e'; |
| else |
| *parity = 'n'; |
| |
| *bits = (frame & UARTn_FRAME_DATABITS__MASK) - |
| UARTn_FRAME_DATABITS(4) + 4; |
| |
| efm_debug(efm_port, "get_opts: options=%d%c%d\n", |
| *baud, *parity, *bits); |
| } |
| |
| static int efm32_uart_console_setup(struct console *co, char *options) |
| { |
| struct efm32_uart_port *efm_port; |
| int baud = 115200; |
| int bits = 8; |
| int parity = 'n'; |
| int flow = 'n'; |
| int ret; |
| |
| if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) { |
| unsigned i; |
| for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) { |
| if (efm32_uart_ports[i]) { |
| pr_warn("efm32-console: fall back to console index %u (from %hhi)\n", |
| i, co->index); |
| co->index = i; |
| break; |
| } |
| } |
| } |
| |
| efm_port = efm32_uart_ports[co->index]; |
| if (!efm_port) { |
| pr_warn("efm32-console: No port at %d\n", co->index); |
| return -ENODEV; |
| } |
| |
| ret = clk_prepare(efm_port->clk); |
| if (ret) { |
| dev_warn(efm_port->port.dev, |
| "console: clk_prepare failed: %d\n", ret); |
| return ret; |
| } |
| |
| efm_port->port.uartclk = clk_get_rate(efm_port->clk); |
| |
| if (options) |
| uart_parse_options(options, &baud, &parity, &bits, &flow); |
| else |
| efm32_uart_console_get_options(efm_port, |
| &baud, &parity, &bits); |
| |
| return uart_set_options(&efm_port->port, co, baud, parity, bits, flow); |
| } |
| |
| static struct uart_driver efm32_uart_reg; |
| |
| static struct console efm32_uart_console = { |
| .name = DEV_NAME, |
| .write = efm32_uart_console_write, |
| .device = uart_console_device, |
| .setup = efm32_uart_console_setup, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| .data = &efm32_uart_reg, |
| }; |
| |
| #else |
| #define efm32_uart_console (*(struct console *)NULL) |
| #endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */ |
| |
| static struct uart_driver efm32_uart_reg = { |
| .owner = THIS_MODULE, |
| .driver_name = DRIVER_NAME, |
| .dev_name = DEV_NAME, |
| .nr = ARRAY_SIZE(efm32_uart_ports), |
| .cons = &efm32_uart_console, |
| }; |
| |
| static int efm32_uart_probe_dt(struct platform_device *pdev, |
| struct efm32_uart_port *efm_port) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| |
| if (!np) |
| return 1; |
| |
| ret = of_alias_get_id(np, "serial"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); |
| return ret; |
| } else { |
| efm_port->port.line = ret; |
| return 0; |
| } |
| |
| } |
| |
| static int __devinit efm32_uart_probe(struct platform_device *pdev) |
| { |
| struct efm32_uart_port *efm_port; |
| struct resource *res; |
| int ret; |
| |
| efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL); |
| if (!efm_port) { |
| dev_dbg(&pdev->dev, "failed to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENODEV; |
| dev_dbg(&pdev->dev, "failed to determine base address\n"); |
| goto err_get_base; |
| } |
| |
| if (resource_size(res) < 60) { |
| ret = -EINVAL; |
| dev_dbg(&pdev->dev, "memory resource too small\n"); |
| goto err_too_small; |
| } |
| |
| ret = platform_get_irq(pdev, 0); |
| if (ret <= 0) { |
| dev_dbg(&pdev->dev, "failed to get rx irq\n"); |
| goto err_get_rxirq; |
| } |
| |
| efm_port->port.irq = ret; |
| |
| ret = platform_get_irq(pdev, 1); |
| if (ret <= 0) |
| ret = efm_port->port.irq + 1; |
| |
| efm_port->txirq = ret; |
| |
| efm_port->port.dev = &pdev->dev; |
| efm_port->port.mapbase = res->start; |
| efm_port->port.type = PORT_EFMUART; |
| efm_port->port.iotype = UPIO_MEM32; |
| efm_port->port.fifosize = 2; |
| efm_port->port.ops = &efm32_uart_pops; |
| efm_port->port.flags = UPF_BOOT_AUTOCONF; |
| |
| ret = efm32_uart_probe_dt(pdev, efm_port); |
| if (ret > 0) |
| /* not created by device tree */ |
| efm_port->port.line = pdev->id; |
| |
| if (efm_port->port.line >= 0 && |
| efm_port->port.line < ARRAY_SIZE(efm32_uart_ports)) |
| efm32_uart_ports[efm_port->port.line] = efm_port; |
| |
| ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port); |
| if (ret) { |
| dev_dbg(&pdev->dev, "failed to add port: %d\n", ret); |
| |
| if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) |
| efm32_uart_ports[pdev->id] = NULL; |
| err_get_rxirq: |
| err_too_small: |
| err_get_base: |
| kfree(efm_port); |
| } else { |
| platform_set_drvdata(pdev, efm_port); |
| dev_dbg(&pdev->dev, "\\o/\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int __devexit efm32_uart_remove(struct platform_device *pdev) |
| { |
| struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| uart_remove_one_port(&efm32_uart_reg, &efm_port->port); |
| |
| if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) |
| efm32_uart_ports[pdev->id] = NULL; |
| |
| kfree(efm_port); |
| |
| return 0; |
| } |
| |
| static struct of_device_id efm32_uart_dt_ids[] = { |
| { |
| .compatible = "efm32,uart", |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids); |
| |
| static struct platform_driver efm32_uart_driver = { |
| .probe = efm32_uart_probe, |
| .remove = efm32_uart_remove, |
| |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = efm32_uart_dt_ids, |
| }, |
| }; |
| |
| static int __init efm32_uart_init(void) |
| { |
| int ret; |
| |
| ret = uart_register_driver(&efm32_uart_reg); |
| if (ret) |
| return ret; |
| |
| ret = platform_driver_register(&efm32_uart_driver); |
| if (ret) |
| uart_unregister_driver(&efm32_uart_reg); |
| |
| pr_info("EFM32 UART/USART driver\n"); |
| |
| return ret; |
| } |
| module_init(efm32_uart_init); |
| |
| static void __exit efm32_uart_exit(void) |
| { |
| platform_driver_unregister(&efm32_uart_driver); |
| uart_unregister_driver(&efm32_uart_reg); |
| } |
| |
| MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); |
| MODULE_DESCRIPTION("EFM32 UART/USART driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |