| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Broadcom MPI3 Storage Controllers |
| * |
| * Copyright (C) 2017-2021 Broadcom Inc. |
| * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) |
| * |
| */ |
| |
| #include "mpi3mr.h" |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| |
| #if defined(writeq) && defined(CONFIG_64BIT) |
| static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) |
| { |
| writeq(b, addr); |
| } |
| #else |
| static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) |
| { |
| __u64 data_out = b; |
| |
| writel((u32)(data_out), addr); |
| writel((u32)(data_out >> 32), (addr + 4)); |
| } |
| #endif |
| |
| static inline bool |
| mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q) |
| { |
| u16 pi, ci, max_entries; |
| bool is_qfull = false; |
| |
| pi = op_req_q->pi; |
| ci = READ_ONCE(op_req_q->ci); |
| max_entries = op_req_q->num_requests; |
| |
| if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1)))) |
| is_qfull = true; |
| |
| return is_qfull; |
| } |
| |
| static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc) |
| { |
| u16 i, max_vectors; |
| |
| max_vectors = mrioc->intr_info_count; |
| |
| for (i = 0; i < max_vectors; i++) |
| synchronize_irq(pci_irq_vector(mrioc->pdev, i)); |
| } |
| |
| void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc) |
| { |
| mrioc->intr_enabled = 0; |
| mpi3mr_sync_irqs(mrioc); |
| } |
| |
| void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc) |
| { |
| mrioc->intr_enabled = 1; |
| } |
| |
| static void mpi3mr_cleanup_isr(struct mpi3mr_ioc *mrioc) |
| { |
| u16 i; |
| |
| mpi3mr_ioc_disable_intr(mrioc); |
| |
| if (!mrioc->intr_info) |
| return; |
| |
| for (i = 0; i < mrioc->intr_info_count; i++) |
| free_irq(pci_irq_vector(mrioc->pdev, i), |
| (mrioc->intr_info + i)); |
| |
| kfree(mrioc->intr_info); |
| mrioc->intr_info = NULL; |
| mrioc->intr_info_count = 0; |
| pci_free_irq_vectors(mrioc->pdev); |
| } |
| |
| void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length, |
| dma_addr_t dma_addr) |
| { |
| struct mpi3_sge_common *sgel = paddr; |
| |
| sgel->flags = flags; |
| sgel->length = cpu_to_le32(length); |
| sgel->address = cpu_to_le64(dma_addr); |
| } |
| |
| void mpi3mr_build_zero_len_sge(void *paddr) |
| { |
| u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; |
| |
| mpi3mr_add_sg_single(paddr, sgl_flags, 0, -1); |
| } |
| |
| void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, |
| dma_addr_t phys_addr) |
| { |
| if (!phys_addr) |
| return NULL; |
| |
| if ((phys_addr < mrioc->reply_buf_dma) || |
| (phys_addr > mrioc->reply_buf_dma_max_address)) |
| return NULL; |
| |
| return mrioc->reply_buf + (phys_addr - mrioc->reply_buf_dma); |
| } |
| |
| void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc, |
| dma_addr_t phys_addr) |
| { |
| if (!phys_addr) |
| return NULL; |
| |
| return mrioc->sense_buf + (phys_addr - mrioc->sense_buf_dma); |
| } |
| |
| static void mpi3mr_repost_reply_buf(struct mpi3mr_ioc *mrioc, |
| u64 reply_dma) |
| { |
| u32 old_idx = 0; |
| |
| spin_lock(&mrioc->reply_free_queue_lock); |
| old_idx = mrioc->reply_free_queue_host_index; |
| mrioc->reply_free_queue_host_index = ( |
| (mrioc->reply_free_queue_host_index == |
| (mrioc->reply_free_qsz - 1)) ? 0 : |
| (mrioc->reply_free_queue_host_index + 1)); |
| mrioc->reply_free_q[old_idx] = cpu_to_le64(reply_dma); |
| writel(mrioc->reply_free_queue_host_index, |
| &mrioc->sysif_regs->reply_free_host_index); |
| spin_unlock(&mrioc->reply_free_queue_lock); |
| } |
| |
| void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, |
| u64 sense_buf_dma) |
| { |
| u32 old_idx = 0; |
| |
| spin_lock(&mrioc->sbq_lock); |
| old_idx = mrioc->sbq_host_index; |
| mrioc->sbq_host_index = ((mrioc->sbq_host_index == |
| (mrioc->sense_buf_q_sz - 1)) ? 0 : |
| (mrioc->sbq_host_index + 1)); |
| mrioc->sense_buf_q[old_idx] = cpu_to_le64(sense_buf_dma); |
| writel(mrioc->sbq_host_index, |
| &mrioc->sysif_regs->sense_buffer_free_host_index); |
| spin_unlock(&mrioc->sbq_lock); |
| } |
| |
| static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc, |
| struct mpi3_event_notification_reply *event_reply) |
| { |
| char *desc = NULL; |
| u16 event; |
| |
| event = event_reply->event; |
| |
| switch (event) { |
| case MPI3_EVENT_LOG_DATA: |
| desc = "Log Data"; |
| break; |
| case MPI3_EVENT_CHANGE: |
| desc = "Event Change"; |
| break; |
| case MPI3_EVENT_GPIO_INTERRUPT: |
| desc = "GPIO Interrupt"; |
| break; |
| case MPI3_EVENT_TEMP_THRESHOLD: |
| desc = "Temperature Threshold"; |
| break; |
| case MPI3_EVENT_CABLE_MGMT: |
| desc = "Cable Management"; |
| break; |
| case MPI3_EVENT_ENERGY_PACK_CHANGE: |
| desc = "Energy Pack Change"; |
| break; |
| case MPI3_EVENT_DEVICE_ADDED: |
| { |
| struct mpi3_device_page0 *event_data = |
| (struct mpi3_device_page0 *)event_reply->event_data; |
| ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n", |
| event_data->dev_handle, event_data->device_form); |
| return; |
| } |
| case MPI3_EVENT_DEVICE_INFO_CHANGED: |
| { |
| struct mpi3_device_page0 *event_data = |
| (struct mpi3_device_page0 *)event_reply->event_data; |
| ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n", |
| event_data->dev_handle, event_data->device_form); |
| return; |
| } |
| case MPI3_EVENT_DEVICE_STATUS_CHANGE: |
| { |
| struct mpi3_event_data_device_status_change *event_data = |
| (struct mpi3_event_data_device_status_change *)event_reply->event_data; |
| ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n", |
| event_data->dev_handle, event_data->reason_code); |
| return; |
| } |
| case MPI3_EVENT_SAS_DISCOVERY: |
| { |
| struct mpi3_event_data_sas_discovery *event_data = |
| (struct mpi3_event_data_sas_discovery *)event_reply->event_data; |
| ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n", |
| (event_data->reason_code == MPI3_EVENT_SAS_DISC_RC_STARTED) ? |
| "start" : "stop", |
| le32_to_cpu(event_data->discovery_status)); |
| return; |
| } |
| case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE: |
| desc = "SAS Broadcast Primitive"; |
| break; |
| case MPI3_EVENT_SAS_NOTIFY_PRIMITIVE: |
| desc = "SAS Notify Primitive"; |
| break; |
| case MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: |
| desc = "SAS Init Device Status Change"; |
| break; |
| case MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW: |
| desc = "SAS Init Table Overflow"; |
| break; |
| case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: |
| desc = "SAS Topology Change List"; |
| break; |
| case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE: |
| desc = "Enclosure Device Status Change"; |
| break; |
| case MPI3_EVENT_HARD_RESET_RECEIVED: |
| desc = "Hard Reset Received"; |
| break; |
| case MPI3_EVENT_SAS_PHY_COUNTER: |
| desc = "SAS PHY Counter"; |
| break; |
| case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR: |
| desc = "SAS Device Discovery Error"; |
| break; |
| case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: |
| desc = "PCIE Topology Change List"; |
| break; |
| case MPI3_EVENT_PCIE_ENUMERATION: |
| { |
| struct mpi3_event_data_pcie_enumeration *event_data = |
| (struct mpi3_event_data_pcie_enumeration *)event_reply->event_data; |
| ioc_info(mrioc, "PCIE Enumeration: (%s)", |
| (event_data->reason_code == |
| MPI3_EVENT_PCIE_ENUM_RC_STARTED) ? "start" : "stop"); |
| if (event_data->enumeration_status) |
| ioc_info(mrioc, "enumeration_status(0x%08x)\n", |
| le32_to_cpu(event_data->enumeration_status)); |
| return; |
| } |
| case MPI3_EVENT_PREPARE_FOR_RESET: |
| desc = "Prepare For Reset"; |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| ioc_info(mrioc, "%s\n", desc); |
| } |
| |
| static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc, |
| struct mpi3_default_reply *def_reply) |
| { |
| struct mpi3_event_notification_reply *event_reply = |
| (struct mpi3_event_notification_reply *)def_reply; |
| |
| mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count); |
| mpi3mr_print_event_data(mrioc, event_reply); |
| mpi3mr_os_handle_events(mrioc, event_reply); |
| } |
| |
| static struct mpi3mr_drv_cmd * |
| mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, |
| struct mpi3_default_reply *def_reply) |
| { |
| u16 idx; |
| |
| switch (host_tag) { |
| case MPI3MR_HOSTTAG_INITCMDS: |
| return &mrioc->init_cmds; |
| case MPI3MR_HOSTTAG_BLK_TMS: |
| return &mrioc->host_tm_cmds; |
| case MPI3MR_HOSTTAG_INVALID: |
| if (def_reply && def_reply->function == |
| MPI3_FUNCTION_EVENT_NOTIFICATION) |
| mpi3mr_handle_events(mrioc, def_reply); |
| return NULL; |
| default: |
| break; |
| } |
| if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN && |
| host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) { |
| idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; |
| return &mrioc->dev_rmhs_cmds[idx]; |
| } |
| |
| return NULL; |
| } |
| |
| static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc, |
| struct mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma) |
| { |
| u16 reply_desc_type, host_tag = 0; |
| u16 ioc_status = MPI3_IOCSTATUS_SUCCESS; |
| u32 ioc_loginfo = 0; |
| struct mpi3_status_reply_descriptor *status_desc; |
| struct mpi3_address_reply_descriptor *addr_desc; |
| struct mpi3_success_reply_descriptor *success_desc; |
| struct mpi3_default_reply *def_reply = NULL; |
| struct mpi3mr_drv_cmd *cmdptr = NULL; |
| struct mpi3_scsi_io_reply *scsi_reply; |
| u8 *sense_buf = NULL; |
| |
| *reply_dma = 0; |
| reply_desc_type = le16_to_cpu(reply_desc->reply_flags) & |
| MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK; |
| switch (reply_desc_type) { |
| case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS: |
| status_desc = (struct mpi3_status_reply_descriptor *)reply_desc; |
| host_tag = le16_to_cpu(status_desc->host_tag); |
| ioc_status = le16_to_cpu(status_desc->ioc_status); |
| if (ioc_status & |
| MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) |
| ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info); |
| ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; |
| break; |
| case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY: |
| addr_desc = (struct mpi3_address_reply_descriptor *)reply_desc; |
| *reply_dma = le64_to_cpu(addr_desc->reply_frame_address); |
| def_reply = mpi3mr_get_reply_virt_addr(mrioc, *reply_dma); |
| if (!def_reply) |
| goto out; |
| host_tag = le16_to_cpu(def_reply->host_tag); |
| ioc_status = le16_to_cpu(def_reply->ioc_status); |
| if (ioc_status & |
| MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) |
| ioc_loginfo = le32_to_cpu(def_reply->ioc_log_info); |
| ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; |
| if (def_reply->function == MPI3_FUNCTION_SCSI_IO) { |
| scsi_reply = (struct mpi3_scsi_io_reply *)def_reply; |
| sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc, |
| le64_to_cpu(scsi_reply->sense_data_buffer_address)); |
| } |
| break; |
| case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS: |
| success_desc = (struct mpi3_success_reply_descriptor *)reply_desc; |
| host_tag = le16_to_cpu(success_desc->host_tag); |
| break; |
| default: |
| break; |
| } |
| |
| cmdptr = mpi3mr_get_drv_cmd(mrioc, host_tag, def_reply); |
| if (cmdptr) { |
| if (cmdptr->state & MPI3MR_CMD_PENDING) { |
| cmdptr->state |= MPI3MR_CMD_COMPLETE; |
| cmdptr->ioc_loginfo = ioc_loginfo; |
| cmdptr->ioc_status = ioc_status; |
| cmdptr->state &= ~MPI3MR_CMD_PENDING; |
| if (def_reply) { |
| cmdptr->state |= MPI3MR_CMD_REPLY_VALID; |
| memcpy((u8 *)cmdptr->reply, (u8 *)def_reply, |
| mrioc->facts.reply_sz); |
| } |
| if (cmdptr->is_waiting) { |
| complete(&cmdptr->done); |
| cmdptr->is_waiting = 0; |
| } else if (cmdptr->callback) |
| cmdptr->callback(mrioc, cmdptr); |
| } |
| } |
| out: |
| if (sense_buf) |
| mpi3mr_repost_sense_buf(mrioc, |
| le64_to_cpu(scsi_reply->sense_data_buffer_address)); |
| } |
| |
| static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc) |
| { |
| u32 exp_phase = mrioc->admin_reply_ephase; |
| u32 admin_reply_ci = mrioc->admin_reply_ci; |
| u32 num_admin_replies = 0; |
| u64 reply_dma = 0; |
| struct mpi3_default_reply_descriptor *reply_desc; |
| |
| reply_desc = (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + |
| admin_reply_ci; |
| |
| if ((le16_to_cpu(reply_desc->reply_flags) & |
| MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) |
| return 0; |
| |
| do { |
| mrioc->admin_req_ci = le16_to_cpu(reply_desc->request_queue_ci); |
| mpi3mr_process_admin_reply_desc(mrioc, reply_desc, &reply_dma); |
| if (reply_dma) |
| mpi3mr_repost_reply_buf(mrioc, reply_dma); |
| num_admin_replies++; |
| if (++admin_reply_ci == mrioc->num_admin_replies) { |
| admin_reply_ci = 0; |
| exp_phase ^= 1; |
| } |
| reply_desc = |
| (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + |
| admin_reply_ci; |
| if ((le16_to_cpu(reply_desc->reply_flags) & |
| MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) |
| break; |
| } while (1); |
| |
| writel(admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); |
| mrioc->admin_reply_ci = admin_reply_ci; |
| mrioc->admin_reply_ephase = exp_phase; |
| |
| return num_admin_replies; |
| } |
| |
| /** |
| * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to |
| * queue's consumer index from operational reply descriptor queue. |
| * @op_reply_q: op_reply_qinfo object |
| * @reply_ci: operational reply descriptor's queue consumer index |
| * |
| * Returns reply descriptor frame address |
| */ |
| static inline struct mpi3_default_reply_descriptor * |
| mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci) |
| { |
| void *segment_base_addr; |
| struct segments *segments = op_reply_q->q_segments; |
| struct mpi3_default_reply_descriptor *reply_desc = NULL; |
| |
| segment_base_addr = |
| segments[reply_ci / op_reply_q->segment_qd].segment; |
| reply_desc = (struct mpi3_default_reply_descriptor *)segment_base_addr + |
| (reply_ci % op_reply_q->segment_qd); |
| return reply_desc; |
| } |
| |
| static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_intr_info *intr_info) |
| { |
| struct op_reply_qinfo *op_reply_q = intr_info->op_reply_q; |
| struct op_req_qinfo *op_req_q; |
| u32 exp_phase; |
| u32 reply_ci; |
| u32 num_op_reply = 0; |
| u64 reply_dma = 0; |
| struct mpi3_default_reply_descriptor *reply_desc; |
| u16 req_q_idx = 0, reply_qidx; |
| |
| reply_qidx = op_reply_q->qid - 1; |
| |
| if (!atomic_add_unless(&op_reply_q->in_use, 1, 1)) |
| return 0; |
| |
| exp_phase = op_reply_q->ephase; |
| reply_ci = op_reply_q->ci; |
| |
| reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); |
| if ((le16_to_cpu(reply_desc->reply_flags) & |
| MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) { |
| atomic_dec(&op_reply_q->in_use); |
| return 0; |
| } |
| |
| do { |
| req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1; |
| op_req_q = &mrioc->req_qinfo[req_q_idx]; |
| |
| WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci)); |
| mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma, |
| reply_qidx); |
| atomic_dec(&op_reply_q->pend_ios); |
| if (reply_dma) |
| mpi3mr_repost_reply_buf(mrioc, reply_dma); |
| num_op_reply++; |
| |
| if (++reply_ci == op_reply_q->num_replies) { |
| reply_ci = 0; |
| exp_phase ^= 1; |
| } |
| |
| reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); |
| |
| if ((le16_to_cpu(reply_desc->reply_flags) & |
| MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) |
| break; |
| /* |
| * Exit completion loop to avoid CPU lockup |
| * Ensure remaining completion happens from threaded ISR. |
| */ |
| if (num_op_reply > mrioc->max_host_ios) { |
| intr_info->op_reply_q->enable_irq_poll = true; |
| break; |
| } |
| |
| } while (1); |
| |
| writel(reply_ci, |
| &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index); |
| op_reply_q->ci = reply_ci; |
| op_reply_q->ephase = exp_phase; |
| |
| atomic_dec(&op_reply_q->in_use); |
| return num_op_reply; |
| } |
| |
| static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata) |
| { |
| struct mpi3mr_intr_info *intr_info = privdata; |
| struct mpi3mr_ioc *mrioc; |
| u16 midx; |
| u32 num_admin_replies = 0, num_op_reply = 0; |
| |
| if (!intr_info) |
| return IRQ_NONE; |
| |
| mrioc = intr_info->mrioc; |
| |
| if (!mrioc->intr_enabled) |
| return IRQ_NONE; |
| |
| midx = intr_info->msix_index; |
| |
| if (!midx) |
| num_admin_replies = mpi3mr_process_admin_reply_q(mrioc); |
| if (intr_info->op_reply_q) |
| num_op_reply = mpi3mr_process_op_reply_q(mrioc, intr_info); |
| |
| if (num_admin_replies || num_op_reply) |
| return IRQ_HANDLED; |
| else |
| return IRQ_NONE; |
| } |
| |
| static irqreturn_t mpi3mr_isr(int irq, void *privdata) |
| { |
| struct mpi3mr_intr_info *intr_info = privdata; |
| struct mpi3mr_ioc *mrioc; |
| u16 midx; |
| int ret; |
| |
| if (!intr_info) |
| return IRQ_NONE; |
| |
| mrioc = intr_info->mrioc; |
| midx = intr_info->msix_index; |
| /* Call primary ISR routine */ |
| ret = mpi3mr_isr_primary(irq, privdata); |
| |
| /* |
| * If more IOs are expected, schedule IRQ polling thread. |
| * Otherwise exit from ISR. |
| */ |
| if (!intr_info->op_reply_q) |
| return ret; |
| |
| if (!intr_info->op_reply_q->enable_irq_poll || |
| !atomic_read(&intr_info->op_reply_q->pend_ios)) |
| return ret; |
| |
| disable_irq_nosync(pci_irq_vector(mrioc->pdev, midx)); |
| |
| return IRQ_WAKE_THREAD; |
| } |
| |
| /** |
| * mpi3mr_isr_poll - Reply queue polling routine |
| * @irq: IRQ |
| * @privdata: Interrupt info |
| * |
| * poll for pending I/O completions in a loop until pending I/Os |
| * present or controller queue depth I/Os are processed. |
| * |
| * Return: IRQ_NONE or IRQ_HANDLED |
| */ |
| static irqreturn_t mpi3mr_isr_poll(int irq, void *privdata) |
| { |
| struct mpi3mr_intr_info *intr_info = privdata; |
| struct mpi3mr_ioc *mrioc; |
| u16 midx; |
| u32 num_op_reply = 0; |
| |
| if (!intr_info || !intr_info->op_reply_q) |
| return IRQ_NONE; |
| |
| mrioc = intr_info->mrioc; |
| midx = intr_info->msix_index; |
| |
| /* Poll for pending IOs completions */ |
| do { |
| if (!mrioc->intr_enabled) |
| break; |
| |
| if (!midx) |
| mpi3mr_process_admin_reply_q(mrioc); |
| if (intr_info->op_reply_q) |
| num_op_reply += |
| mpi3mr_process_op_reply_q(mrioc, intr_info); |
| |
| usleep_range(mrioc->irqpoll_sleep, 10 * mrioc->irqpoll_sleep); |
| |
| } while (atomic_read(&intr_info->op_reply_q->pend_ios) && |
| (num_op_reply < mrioc->max_host_ios)); |
| |
| intr_info->op_reply_q->enable_irq_poll = false; |
| enable_irq(pci_irq_vector(mrioc->pdev, midx)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * mpi3mr_request_irq - Request IRQ and register ISR |
| * @mrioc: Adapter instance reference |
| * @index: IRQ vector index |
| * |
| * Request threaded ISR with primary ISR and secondary |
| * |
| * Return: 0 on success and non zero on failures. |
| */ |
| static inline int mpi3mr_request_irq(struct mpi3mr_ioc *mrioc, u16 index) |
| { |
| struct pci_dev *pdev = mrioc->pdev; |
| struct mpi3mr_intr_info *intr_info = mrioc->intr_info + index; |
| int retval = 0; |
| |
| intr_info->mrioc = mrioc; |
| intr_info->msix_index = index; |
| intr_info->op_reply_q = NULL; |
| |
| snprintf(intr_info->name, MPI3MR_NAME_LENGTH, "%s%d-msix%d", |
| mrioc->driver_name, mrioc->id, index); |
| |
| retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr, |
| mpi3mr_isr_poll, IRQF_SHARED, intr_info->name, intr_info); |
| if (retval) { |
| ioc_err(mrioc, "%s: Unable to allocate interrupt %d!\n", |
| intr_info->name, pci_irq_vector(pdev, index)); |
| return retval; |
| } |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_setup_isr - Setup ISR for the controller |
| * @mrioc: Adapter instance reference |
| * @setup_one: Request one IRQ or more |
| * |
| * Allocate IRQ vectors and call mpi3mr_request_irq to setup ISR |
| * |
| * Return: 0 on success and non zero on failures. |
| */ |
| static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one) |
| { |
| unsigned int irq_flags = PCI_IRQ_MSIX; |
| int max_vectors; |
| int retval; |
| int i; |
| struct irq_affinity desc = { .pre_vectors = 1}; |
| |
| mpi3mr_cleanup_isr(mrioc); |
| |
| if (setup_one || reset_devices) |
| max_vectors = 1; |
| else { |
| max_vectors = |
| min_t(int, mrioc->cpu_count + 1, mrioc->msix_count); |
| |
| ioc_info(mrioc, |
| "MSI-X vectors supported: %d, no of cores: %d,", |
| mrioc->msix_count, mrioc->cpu_count); |
| ioc_info(mrioc, |
| "MSI-x vectors requested: %d\n", max_vectors); |
| } |
| |
| irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; |
| |
| mrioc->op_reply_q_offset = (max_vectors > 1) ? 1 : 0; |
| retval = pci_alloc_irq_vectors_affinity(mrioc->pdev, |
| 1, max_vectors, irq_flags, &desc); |
| if (retval < 0) { |
| ioc_err(mrioc, "Cannot alloc irq vectors\n"); |
| goto out_failed; |
| } |
| if (retval != max_vectors) { |
| ioc_info(mrioc, |
| "allocated vectors (%d) are less than configured (%d)\n", |
| retval, max_vectors); |
| /* |
| * If only one MSI-x is allocated, then MSI-x 0 will be shared |
| * between Admin queue and operational queue |
| */ |
| if (retval == 1) |
| mrioc->op_reply_q_offset = 0; |
| |
| max_vectors = retval; |
| } |
| mrioc->intr_info = kzalloc(sizeof(struct mpi3mr_intr_info) * max_vectors, |
| GFP_KERNEL); |
| if (!mrioc->intr_info) { |
| retval = -ENOMEM; |
| pci_free_irq_vectors(mrioc->pdev); |
| goto out_failed; |
| } |
| for (i = 0; i < max_vectors; i++) { |
| retval = mpi3mr_request_irq(mrioc, i); |
| if (retval) { |
| mrioc->intr_info_count = i; |
| goto out_failed; |
| } |
| } |
| mrioc->intr_info_count = max_vectors; |
| mpi3mr_ioc_enable_intr(mrioc); |
| return 0; |
| |
| out_failed: |
| mpi3mr_cleanup_isr(mrioc); |
| |
| return retval; |
| } |
| |
| static const struct { |
| enum mpi3mr_iocstate value; |
| char *name; |
| } mrioc_states[] = { |
| { MRIOC_STATE_READY, "ready" }, |
| { MRIOC_STATE_FAULT, "fault" }, |
| { MRIOC_STATE_RESET, "reset" }, |
| { MRIOC_STATE_BECOMING_READY, "becoming ready" }, |
| { MRIOC_STATE_RESET_REQUESTED, "reset requested" }, |
| { MRIOC_STATE_UNRECOVERABLE, "unrecoverable error" }, |
| }; |
| |
| static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state) |
| { |
| int i; |
| char *name = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(mrioc_states); i++) { |
| if (mrioc_states[i].value == mrioc_state) { |
| name = mrioc_states[i].name; |
| break; |
| } |
| } |
| return name; |
| } |
| |
| /* Reset reason to name mapper structure*/ |
| static const struct { |
| enum mpi3mr_reset_reason value; |
| char *name; |
| } mpi3mr_reset_reason_codes[] = { |
| { MPI3MR_RESET_FROM_BRINGUP, "timeout in bringup" }, |
| { MPI3MR_RESET_FROM_FAULT_WATCH, "fault" }, |
| { MPI3MR_RESET_FROM_IOCTL, "application invocation" }, |
| { MPI3MR_RESET_FROM_EH_HOS, "error handling" }, |
| { MPI3MR_RESET_FROM_TM_TIMEOUT, "TM timeout" }, |
| { MPI3MR_RESET_FROM_IOCTL_TIMEOUT, "IOCTL timeout" }, |
| { MPI3MR_RESET_FROM_MUR_FAILURE, "MUR failure" }, |
| { MPI3MR_RESET_FROM_CTLR_CLEANUP, "timeout in controller cleanup" }, |
| { MPI3MR_RESET_FROM_CIACTIV_FAULT, "component image activation fault" }, |
| { MPI3MR_RESET_FROM_PE_TIMEOUT, "port enable timeout" }, |
| { MPI3MR_RESET_FROM_TSU_TIMEOUT, "time stamp update timeout" }, |
| { MPI3MR_RESET_FROM_DELREQQ_TIMEOUT, "delete request queue timeout" }, |
| { MPI3MR_RESET_FROM_DELREPQ_TIMEOUT, "delete reply queue timeout" }, |
| { |
| MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT, |
| "create request queue timeout" |
| }, |
| { |
| MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT, |
| "create reply queue timeout" |
| }, |
| { MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT, "IOC facts timeout" }, |
| { MPI3MR_RESET_FROM_IOCINIT_TIMEOUT, "IOC init timeout" }, |
| { MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT, "event notify timeout" }, |
| { MPI3MR_RESET_FROM_EVTACK_TIMEOUT, "event acknowledgment timeout" }, |
| { |
| MPI3MR_RESET_FROM_CIACTVRST_TIMER, |
| "component image activation timeout" |
| }, |
| { |
| MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT, |
| "get package version timeout" |
| }, |
| { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" }, |
| { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" }, |
| }; |
| |
| /** |
| * mpi3mr_reset_rc_name - get reset reason code name |
| * @reason_code: reset reason code value |
| * |
| * Map reset reason to an NULL terminated ASCII string |
| * |
| * Return: name corresponding to reset reason value or NULL. |
| */ |
| static const char *mpi3mr_reset_rc_name(enum mpi3mr_reset_reason reason_code) |
| { |
| int i; |
| char *name = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_reason_codes); i++) { |
| if (mpi3mr_reset_reason_codes[i].value == reason_code) { |
| name = mpi3mr_reset_reason_codes[i].name; |
| break; |
| } |
| } |
| return name; |
| } |
| |
| /* Reset type to name mapper structure*/ |
| static const struct { |
| u16 reset_type; |
| char *name; |
| } mpi3mr_reset_types[] = { |
| { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, "soft" }, |
| { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, "diag fault" }, |
| }; |
| |
| /** |
| * mpi3mr_reset_type_name - get reset type name |
| * @reset_type: reset type value |
| * |
| * Map reset type to an NULL terminated ASCII string |
| * |
| * Return: name corresponding to reset type value or NULL. |
| */ |
| static const char *mpi3mr_reset_type_name(u16 reset_type) |
| { |
| int i; |
| char *name = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_types); i++) { |
| if (mpi3mr_reset_types[i].reset_type == reset_type) { |
| name = mpi3mr_reset_types[i].name; |
| break; |
| } |
| } |
| return name; |
| } |
| |
| /** |
| * mpi3mr_print_fault_info - Display fault information |
| * @mrioc: Adapter instance reference |
| * |
| * Display the controller fault information if there is a |
| * controller fault. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_status, code, code1, code2, code3; |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| |
| if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) { |
| code = readl(&mrioc->sysif_regs->fault); |
| code1 = readl(&mrioc->sysif_regs->fault_info[0]); |
| code2 = readl(&mrioc->sysif_regs->fault_info[1]); |
| code3 = readl(&mrioc->sysif_regs->fault_info[2]); |
| |
| ioc_info(mrioc, |
| "fault code(0x%08X): Additional code: (0x%08X:0x%08X:0x%08X)\n", |
| code, code1, code2, code3); |
| } |
| } |
| |
| /** |
| * mpi3mr_get_iocstate - Get IOC State |
| * @mrioc: Adapter instance reference |
| * |
| * Return a proper IOC state enum based on the IOC status and |
| * IOC configuration and unrcoverable state of the controller. |
| * |
| * Return: Current IOC state. |
| */ |
| enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_status, ioc_config; |
| u8 ready, enabled; |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| |
| if (mrioc->unrecoverable) |
| return MRIOC_STATE_UNRECOVERABLE; |
| if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) |
| return MRIOC_STATE_FAULT; |
| |
| ready = (ioc_status & MPI3_SYSIF_IOC_STATUS_READY); |
| enabled = (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC); |
| |
| if (ready && enabled) |
| return MRIOC_STATE_READY; |
| if ((!ready) && (!enabled)) |
| return MRIOC_STATE_RESET; |
| if ((!ready) && (enabled)) |
| return MRIOC_STATE_BECOMING_READY; |
| |
| return MRIOC_STATE_RESET_REQUESTED; |
| } |
| |
| /** |
| * mpi3mr_clear_reset_history - clear reset history |
| * @mrioc: Adapter instance reference |
| * |
| * Write the reset history bit in IOC status to clear the bit, |
| * if it is already set. |
| * |
| * Return: Nothing. |
| */ |
| static inline void mpi3mr_clear_reset_history(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_status; |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) |
| writel(ioc_status, &mrioc->sysif_regs->ioc_status); |
| } |
| |
| /** |
| * mpi3mr_issue_and_process_mur - Message unit Reset handler |
| * @mrioc: Adapter instance reference |
| * @reset_reason: Reset reason code |
| * |
| * Issue Message unit Reset to the controller and wait for it to |
| * be complete. |
| * |
| * Return: 0 on success, -1 on failure. |
| */ |
| static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc, |
| u32 reset_reason) |
| { |
| u32 ioc_config, timeout, ioc_status; |
| int retval = -1; |
| |
| ioc_info(mrioc, "Issuing Message unit Reset(MUR)\n"); |
| if (mrioc->unrecoverable) { |
| ioc_info(mrioc, "IOC is unrecoverable MUR not issued\n"); |
| return retval; |
| } |
| mpi3mr_clear_reset_history(mrioc); |
| writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| ioc_config &= ~MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; |
| writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); |
| |
| timeout = mrioc->ready_timeout * 10; |
| do { |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)) { |
| mpi3mr_clear_reset_history(mrioc); |
| ioc_config = |
| readl(&mrioc->sysif_regs->ioc_configuration); |
| if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || |
| (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) || |
| (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) { |
| retval = 0; |
| break; |
| } |
| } |
| msleep(100); |
| } while (--timeout); |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| |
| ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n", |
| (!retval) ? "successful" : "failed", ioc_status, ioc_config); |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_bring_ioc_ready - Bring controller to ready state |
| * @mrioc: Adapter instance reference |
| * |
| * Set Enable IOC bit in IOC configuration register and wait for |
| * the controller to become ready. |
| * |
| * Return: 0 on success, -1 on failure. |
| */ |
| static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_config, timeout; |
| enum mpi3mr_iocstate current_state; |
| |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| ioc_config |= MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; |
| writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); |
| |
| timeout = mrioc->ready_timeout * 10; |
| do { |
| current_state = mpi3mr_get_iocstate(mrioc); |
| if (current_state == MRIOC_STATE_READY) |
| return 0; |
| msleep(100); |
| } while (--timeout); |
| |
| return -1; |
| } |
| |
| /** |
| * mpi3mr_soft_reset_success - Check softreset is success or not |
| * @ioc_status: IOC status register value |
| * @ioc_config: IOC config register value |
| * |
| * Check whether the soft reset is successful or not based on |
| * IOC status and IOC config register values. |
| * |
| * Return: True when the soft reset is success, false otherwise. |
| */ |
| static inline bool |
| mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config) |
| { |
| if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || |
| (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) || |
| (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) |
| return true; |
| return false; |
| } |
| |
| /** |
| * mpi3mr_diagfault_success - Check diag fault is success or not |
| * @mrioc: Adapter reference |
| * @ioc_status: IOC status register value |
| * |
| * Check whether the controller hit diag reset fault code. |
| * |
| * Return: True when there is diag fault, false otherwise. |
| */ |
| static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc, |
| u32 ioc_status) |
| { |
| u32 fault; |
| |
| if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) |
| return false; |
| fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK; |
| if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) |
| return true; |
| return false; |
| } |
| |
| /** |
| * mpi3mr_set_diagsave - Set diag save bit for snapdump |
| * @mrioc: Adapter reference |
| * |
| * Set diag save bit in IOC configuration register to enable |
| * snapdump. |
| * |
| * Return: Nothing. |
| */ |
| static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_config; |
| |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| ioc_config |= MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE; |
| writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); |
| } |
| |
| /** |
| * mpi3mr_issue_reset - Issue reset to the controller |
| * @mrioc: Adapter reference |
| * @reset_type: Reset type |
| * @reset_reason: Reset reason code |
| * |
| * Unlock the host diagnostic registers and write the specific |
| * reset type to that, wait for reset acknowledgment from the |
| * controller, if the reset is not successful retry for the |
| * predefined number of times. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, |
| u32 reset_reason) |
| { |
| int retval = -1; |
| u8 unlock_retry_count, reset_retry_count = 0; |
| u32 host_diagnostic, timeout, ioc_status, ioc_config; |
| |
| pci_cfg_access_lock(mrioc->pdev); |
| if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) && |
| (reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT)) |
| goto out; |
| if (mrioc->unrecoverable) |
| goto out; |
| retry_reset: |
| unlock_retry_count = 0; |
| mpi3mr_clear_reset_history(mrioc); |
| do { |
| ioc_info(mrioc, |
| "Write magic sequence to unlock host diag register (retry=%d)\n", |
| ++unlock_retry_count); |
| if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) { |
| writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); |
| mrioc->unrecoverable = 1; |
| goto out; |
| } |
| |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH, |
| &mrioc->sysif_regs->write_sequence); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH, |
| &mrioc->sysif_regs->write_sequence); |
| usleep_range(1000, 1100); |
| host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); |
| ioc_info(mrioc, |
| "wrote magic sequence: retry_count(%d), host_diagnostic(0x%08x)\n", |
| unlock_retry_count, host_diagnostic); |
| } while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE)); |
| |
| writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); |
| ioc_info(mrioc, "%s reset due to %s(0x%x)\n", |
| mpi3mr_reset_type_name(reset_type), |
| mpi3mr_reset_rc_name(reset_reason), reset_reason); |
| writel(host_diagnostic | reset_type, |
| &mrioc->sysif_regs->host_diagnostic); |
| timeout = mrioc->ready_timeout * 10; |
| if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) { |
| do { |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if (ioc_status & |
| MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) { |
| mpi3mr_clear_reset_history(mrioc); |
| ioc_config = |
| readl(&mrioc->sysif_regs->ioc_configuration); |
| if (mpi3mr_soft_reset_success(ioc_status, |
| ioc_config)) { |
| retval = 0; |
| break; |
| } |
| } |
| msleep(100); |
| } while (--timeout); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, |
| &mrioc->sysif_regs->write_sequence); |
| } else if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT) { |
| do { |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if (mpi3mr_diagfault_success(mrioc, ioc_status)) { |
| retval = 0; |
| break; |
| } |
| msleep(100); |
| } while (--timeout); |
| mpi3mr_clear_reset_history(mrioc); |
| writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, |
| &mrioc->sysif_regs->write_sequence); |
| } |
| if (retval && ((++reset_retry_count) < MPI3MR_MAX_RESET_RETRY_COUNT)) { |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| ioc_info(mrioc, |
| "Base IOC Sts/Config after reset try %d is (0x%x)/(0x%x)\n", |
| reset_retry_count, ioc_status, ioc_config); |
| goto retry_reset; |
| } |
| |
| out: |
| pci_cfg_access_unlock(mrioc->pdev); |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| |
| ioc_info(mrioc, |
| "Base IOC Sts/Config after %s reset is (0x%x)/(0x%x)\n", |
| (!retval) ? "successful" : "failed", ioc_status, |
| ioc_config); |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_admin_request_post - Post request to admin queue |
| * @mrioc: Adapter reference |
| * @admin_req: MPI3 request |
| * @admin_req_sz: Request size |
| * @ignore_reset: Ignore reset in process |
| * |
| * Post the MPI3 request into admin request queue and |
| * inform the controller, if the queue is full return |
| * appropriate error. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req, |
| u16 admin_req_sz, u8 ignore_reset) |
| { |
| u16 areq_pi = 0, areq_ci = 0, max_entries = 0; |
| int retval = 0; |
| unsigned long flags; |
| u8 *areq_entry; |
| |
| if (mrioc->unrecoverable) { |
| ioc_err(mrioc, "%s : Unrecoverable controller\n", __func__); |
| return -EFAULT; |
| } |
| |
| spin_lock_irqsave(&mrioc->admin_req_lock, flags); |
| areq_pi = mrioc->admin_req_pi; |
| areq_ci = mrioc->admin_req_ci; |
| max_entries = mrioc->num_admin_req; |
| if ((areq_ci == (areq_pi + 1)) || ((!areq_ci) && |
| (areq_pi == (max_entries - 1)))) { |
| ioc_err(mrioc, "AdminReqQ full condition detected\n"); |
| retval = -EAGAIN; |
| goto out; |
| } |
| if (!ignore_reset && mrioc->reset_in_progress) { |
| ioc_err(mrioc, "AdminReqQ submit reset in progress\n"); |
| retval = -EAGAIN; |
| goto out; |
| } |
| areq_entry = (u8 *)mrioc->admin_req_base + |
| (areq_pi * MPI3MR_ADMIN_REQ_FRAME_SZ); |
| memset(areq_entry, 0, MPI3MR_ADMIN_REQ_FRAME_SZ); |
| memcpy(areq_entry, (u8 *)admin_req, admin_req_sz); |
| |
| if (++areq_pi == max_entries) |
| areq_pi = 0; |
| mrioc->admin_req_pi = areq_pi; |
| |
| writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); |
| |
| out: |
| spin_unlock_irqrestore(&mrioc->admin_req_lock, flags); |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_free_op_req_q_segments - free request memory segments |
| * @mrioc: Adapter instance reference |
| * @q_idx: operational request queue index |
| * |
| * Free memory segments allocated for operational request queue |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) |
| { |
| u16 j; |
| int size; |
| struct segments *segments; |
| |
| segments = mrioc->req_qinfo[q_idx].q_segments; |
| if (!segments) |
| return; |
| |
| if (mrioc->enable_segqueue) { |
| size = MPI3MR_OP_REQ_Q_SEG_SIZE; |
| if (mrioc->req_qinfo[q_idx].q_segment_list) { |
| dma_free_coherent(&mrioc->pdev->dev, |
| MPI3MR_MAX_SEG_LIST_SIZE, |
| mrioc->req_qinfo[q_idx].q_segment_list, |
| mrioc->req_qinfo[q_idx].q_segment_list_dma); |
| mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL; |
| } |
| } else |
| size = mrioc->req_qinfo[q_idx].num_requests * |
| mrioc->facts.op_req_sz; |
| |
| for (j = 0; j < mrioc->req_qinfo[q_idx].num_segments; j++) { |
| if (!segments[j].segment) |
| continue; |
| dma_free_coherent(&mrioc->pdev->dev, |
| size, segments[j].segment, segments[j].segment_dma); |
| segments[j].segment = NULL; |
| } |
| kfree(mrioc->req_qinfo[q_idx].q_segments); |
| mrioc->req_qinfo[q_idx].q_segments = NULL; |
| mrioc->req_qinfo[q_idx].qid = 0; |
| } |
| |
| /** |
| * mpi3mr_free_op_reply_q_segments - free reply memory segments |
| * @mrioc: Adapter instance reference |
| * @q_idx: operational reply queue index |
| * |
| * Free memory segments allocated for operational reply queue |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_free_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) |
| { |
| u16 j; |
| int size; |
| struct segments *segments; |
| |
| segments = mrioc->op_reply_qinfo[q_idx].q_segments; |
| if (!segments) |
| return; |
| |
| if (mrioc->enable_segqueue) { |
| size = MPI3MR_OP_REP_Q_SEG_SIZE; |
| if (mrioc->op_reply_qinfo[q_idx].q_segment_list) { |
| dma_free_coherent(&mrioc->pdev->dev, |
| MPI3MR_MAX_SEG_LIST_SIZE, |
| mrioc->op_reply_qinfo[q_idx].q_segment_list, |
| mrioc->op_reply_qinfo[q_idx].q_segment_list_dma); |
| mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL; |
| } |
| } else |
| size = mrioc->op_reply_qinfo[q_idx].segment_qd * |
| mrioc->op_reply_desc_sz; |
| |
| for (j = 0; j < mrioc->op_reply_qinfo[q_idx].num_segments; j++) { |
| if (!segments[j].segment) |
| continue; |
| dma_free_coherent(&mrioc->pdev->dev, |
| size, segments[j].segment, segments[j].segment_dma); |
| segments[j].segment = NULL; |
| } |
| |
| kfree(mrioc->op_reply_qinfo[q_idx].q_segments); |
| mrioc->op_reply_qinfo[q_idx].q_segments = NULL; |
| mrioc->op_reply_qinfo[q_idx].qid = 0; |
| } |
| |
| /** |
| * mpi3mr_delete_op_reply_q - delete operational reply queue |
| * @mrioc: Adapter instance reference |
| * @qidx: operational reply queue index |
| * |
| * Delete operatinal reply queue by issuing MPI request |
| * through admin queue. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_delete_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct mpi3_delete_reply_queue_request delq_req; |
| int retval = 0; |
| u16 reply_qid = 0, midx; |
| |
| reply_qid = mrioc->op_reply_qinfo[qidx].qid; |
| |
| midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); |
| |
| if (!reply_qid) { |
| retval = -1; |
| ioc_err(mrioc, "Issue DelRepQ: called with invalid ReqQID\n"); |
| goto out; |
| } |
| |
| memset(&delq_req, 0, sizeof(delq_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue DelRepQ: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| delq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| delq_req.function = MPI3_FUNCTION_DELETE_REPLY_QUEUE; |
| delq_req.queue_id = cpu_to_le16(reply_qid); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &delq_req, sizeof(delq_req), |
| 1); |
| if (retval) { |
| ioc_err(mrioc, "Issue DelRepQ: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue DelRepQ: command timed out\n"); |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_DELREPQ_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Issue DelRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| mrioc->intr_info[midx].op_reply_q = NULL; |
| |
| mpi3mr_free_op_reply_q_segments(mrioc, qidx); |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_alloc_op_reply_q_segments -Alloc segmented reply pool |
| * @mrioc: Adapter instance reference |
| * @qidx: request queue index |
| * |
| * Allocate segmented memory pools for operational reply |
| * queue. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_alloc_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; |
| int i, size; |
| u64 *q_segment_list_entry = NULL; |
| struct segments *segments; |
| |
| if (mrioc->enable_segqueue) { |
| op_reply_q->segment_qd = |
| MPI3MR_OP_REP_Q_SEG_SIZE / mrioc->op_reply_desc_sz; |
| |
| size = MPI3MR_OP_REP_Q_SEG_SIZE; |
| |
| op_reply_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, |
| MPI3MR_MAX_SEG_LIST_SIZE, &op_reply_q->q_segment_list_dma, |
| GFP_KERNEL); |
| if (!op_reply_q->q_segment_list) |
| return -ENOMEM; |
| q_segment_list_entry = (u64 *)op_reply_q->q_segment_list; |
| } else { |
| op_reply_q->segment_qd = op_reply_q->num_replies; |
| size = op_reply_q->num_replies * mrioc->op_reply_desc_sz; |
| } |
| |
| op_reply_q->num_segments = DIV_ROUND_UP(op_reply_q->num_replies, |
| op_reply_q->segment_qd); |
| |
| op_reply_q->q_segments = kcalloc(op_reply_q->num_segments, |
| sizeof(struct segments), GFP_KERNEL); |
| if (!op_reply_q->q_segments) |
| return -ENOMEM; |
| |
| segments = op_reply_q->q_segments; |
| for (i = 0; i < op_reply_q->num_segments; i++) { |
| segments[i].segment = |
| dma_alloc_coherent(&mrioc->pdev->dev, |
| size, &segments[i].segment_dma, GFP_KERNEL); |
| if (!segments[i].segment) |
| return -ENOMEM; |
| if (mrioc->enable_segqueue) |
| q_segment_list_entry[i] = |
| (unsigned long)segments[i].segment_dma; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mpi3mr_alloc_op_req_q_segments - Alloc segmented req pool. |
| * @mrioc: Adapter instance reference |
| * @qidx: request queue index |
| * |
| * Allocate segmented memory pools for operational request |
| * queue. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_alloc_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; |
| int i, size; |
| u64 *q_segment_list_entry = NULL; |
| struct segments *segments; |
| |
| if (mrioc->enable_segqueue) { |
| op_req_q->segment_qd = |
| MPI3MR_OP_REQ_Q_SEG_SIZE / mrioc->facts.op_req_sz; |
| |
| size = MPI3MR_OP_REQ_Q_SEG_SIZE; |
| |
| op_req_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, |
| MPI3MR_MAX_SEG_LIST_SIZE, &op_req_q->q_segment_list_dma, |
| GFP_KERNEL); |
| if (!op_req_q->q_segment_list) |
| return -ENOMEM; |
| q_segment_list_entry = (u64 *)op_req_q->q_segment_list; |
| |
| } else { |
| op_req_q->segment_qd = op_req_q->num_requests; |
| size = op_req_q->num_requests * mrioc->facts.op_req_sz; |
| } |
| |
| op_req_q->num_segments = DIV_ROUND_UP(op_req_q->num_requests, |
| op_req_q->segment_qd); |
| |
| op_req_q->q_segments = kcalloc(op_req_q->num_segments, |
| sizeof(struct segments), GFP_KERNEL); |
| if (!op_req_q->q_segments) |
| return -ENOMEM; |
| |
| segments = op_req_q->q_segments; |
| for (i = 0; i < op_req_q->num_segments; i++) { |
| segments[i].segment = |
| dma_alloc_coherent(&mrioc->pdev->dev, |
| size, &segments[i].segment_dma, GFP_KERNEL); |
| if (!segments[i].segment) |
| return -ENOMEM; |
| if (mrioc->enable_segqueue) |
| q_segment_list_entry[i] = |
| (unsigned long)segments[i].segment_dma; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mpi3mr_create_op_reply_q - create operational reply queue |
| * @mrioc: Adapter instance reference |
| * @qidx: operational reply queue index |
| * |
| * Create operatinal reply queue by issuing MPI request |
| * through admin queue. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct mpi3_create_reply_queue_request create_req; |
| struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; |
| int retval = 0; |
| u16 reply_qid = 0, midx; |
| |
| reply_qid = op_reply_q->qid; |
| |
| midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); |
| |
| if (reply_qid) { |
| retval = -1; |
| ioc_err(mrioc, "CreateRepQ: called for duplicate qid %d\n", |
| reply_qid); |
| |
| return retval; |
| } |
| |
| reply_qid = qidx + 1; |
| op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD; |
| op_reply_q->ci = 0; |
| op_reply_q->ephase = 1; |
| atomic_set(&op_reply_q->pend_ios, 0); |
| atomic_set(&op_reply_q->in_use, 0); |
| op_reply_q->enable_irq_poll = false; |
| |
| if (!op_reply_q->q_segments) { |
| retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx); |
| if (retval) { |
| mpi3mr_free_op_reply_q_segments(mrioc, qidx); |
| goto out; |
| } |
| } |
| |
| memset(&create_req, 0, sizeof(create_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "CreateRepQ: Init command is in use\n"); |
| goto out_unlock; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| create_req.function = MPI3_FUNCTION_CREATE_REPLY_QUEUE; |
| create_req.queue_id = cpu_to_le16(reply_qid); |
| create_req.flags = MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE; |
| create_req.msix_index = cpu_to_le16(mrioc->intr_info[midx].msix_index); |
| if (mrioc->enable_segqueue) { |
| create_req.flags |= |
| MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; |
| create_req.base_address = cpu_to_le64( |
| op_reply_q->q_segment_list_dma); |
| } else |
| create_req.base_address = cpu_to_le64( |
| op_reply_q->q_segments[0].segment_dma); |
| |
| create_req.size = cpu_to_le16(op_reply_q->num_replies); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &create_req, |
| sizeof(create_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "CreateRepQ: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "CreateRepQ: command timed out\n"); |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "CreateRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| op_reply_q->qid = reply_qid; |
| mrioc->intr_info[midx].op_reply_q = op_reply_q; |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_create_op_req_q - create operational request queue |
| * @mrioc: Adapter instance reference |
| * @idx: operational request queue index |
| * @reply_qid: Reply queue ID |
| * |
| * Create operatinal request queue by issuing MPI request |
| * through admin queue. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_create_op_req_q(struct mpi3mr_ioc *mrioc, u16 idx, |
| u16 reply_qid) |
| { |
| struct mpi3_create_request_queue_request create_req; |
| struct op_req_qinfo *op_req_q = mrioc->req_qinfo + idx; |
| int retval = 0; |
| u16 req_qid = 0; |
| |
| req_qid = op_req_q->qid; |
| |
| if (req_qid) { |
| retval = -1; |
| ioc_err(mrioc, "CreateReqQ: called for duplicate qid %d\n", |
| req_qid); |
| |
| return retval; |
| } |
| req_qid = idx + 1; |
| |
| op_req_q->num_requests = MPI3MR_OP_REQ_Q_QD; |
| op_req_q->ci = 0; |
| op_req_q->pi = 0; |
| op_req_q->reply_qid = reply_qid; |
| spin_lock_init(&op_req_q->q_lock); |
| |
| if (!op_req_q->q_segments) { |
| retval = mpi3mr_alloc_op_req_q_segments(mrioc, idx); |
| if (retval) { |
| mpi3mr_free_op_req_q_segments(mrioc, idx); |
| goto out; |
| } |
| } |
| |
| memset(&create_req, 0, sizeof(create_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "CreateReqQ: Init command is in use\n"); |
| goto out_unlock; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| create_req.function = MPI3_FUNCTION_CREATE_REQUEST_QUEUE; |
| create_req.queue_id = cpu_to_le16(req_qid); |
| if (mrioc->enable_segqueue) { |
| create_req.flags = |
| MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; |
| create_req.base_address = cpu_to_le64( |
| op_req_q->q_segment_list_dma); |
| } else |
| create_req.base_address = cpu_to_le64( |
| op_req_q->q_segments[0].segment_dma); |
| create_req.reply_queue_id = cpu_to_le16(reply_qid); |
| create_req.size = cpu_to_le16(op_req_q->num_requests); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &create_req, |
| sizeof(create_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "CreateReqQ: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "CreateReqQ: command timed out\n"); |
| mpi3mr_set_diagsave(mrioc); |
| if (mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT)) |
| mrioc->unrecoverable = 1; |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "CreateReqQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| op_req_q->qid = req_qid; |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_create_op_queues - create operational queue pairs |
| * @mrioc: Adapter instance reference |
| * |
| * Allocate memory for operational queue meta data and call |
| * create request and reply queue functions. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc) |
| { |
| int retval = 0; |
| u16 num_queues = 0, i = 0, msix_count_op_q = 1; |
| |
| num_queues = min_t(int, mrioc->facts.max_op_reply_q, |
| mrioc->facts.max_op_req_q); |
| |
| msix_count_op_q = |
| mrioc->intr_info_count - mrioc->op_reply_q_offset; |
| if (!mrioc->num_queues) |
| mrioc->num_queues = min_t(int, num_queues, msix_count_op_q); |
| num_queues = mrioc->num_queues; |
| ioc_info(mrioc, "Trying to create %d Operational Q pairs\n", |
| num_queues); |
| |
| if (!mrioc->req_qinfo) { |
| mrioc->req_qinfo = kcalloc(num_queues, |
| sizeof(struct op_req_qinfo), GFP_KERNEL); |
| if (!mrioc->req_qinfo) { |
| retval = -1; |
| goto out_failed; |
| } |
| |
| mrioc->op_reply_qinfo = kzalloc(sizeof(struct op_reply_qinfo) * |
| num_queues, GFP_KERNEL); |
| if (!mrioc->op_reply_qinfo) { |
| retval = -1; |
| goto out_failed; |
| } |
| } |
| |
| if (mrioc->enable_segqueue) |
| ioc_info(mrioc, |
| "allocating operational queues through segmented queues\n"); |
| |
| for (i = 0; i < num_queues; i++) { |
| if (mpi3mr_create_op_reply_q(mrioc, i)) { |
| ioc_err(mrioc, "Cannot create OP RepQ %d\n", i); |
| break; |
| } |
| if (mpi3mr_create_op_req_q(mrioc, i, |
| mrioc->op_reply_qinfo[i].qid)) { |
| ioc_err(mrioc, "Cannot create OP ReqQ %d\n", i); |
| mpi3mr_delete_op_reply_q(mrioc, i); |
| break; |
| } |
| } |
| |
| if (i == 0) { |
| /* Not even one queue is created successfully*/ |
| retval = -1; |
| goto out_failed; |
| } |
| mrioc->num_op_reply_q = mrioc->num_op_req_q = i; |
| ioc_info(mrioc, "Successfully created %d Operational Q pairs\n", |
| mrioc->num_op_reply_q); |
| |
| return retval; |
| out_failed: |
| kfree(mrioc->req_qinfo); |
| mrioc->req_qinfo = NULL; |
| |
| kfree(mrioc->op_reply_qinfo); |
| mrioc->op_reply_qinfo = NULL; |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_op_request_post - Post request to operational queue |
| * @mrioc: Adapter reference |
| * @op_req_q: Operational request queue info |
| * @req: MPI3 request |
| * |
| * Post the MPI3 request into operational request queue and |
| * inform the controller, if the queue is full return |
| * appropriate error. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc, |
| struct op_req_qinfo *op_req_q, u8 *req) |
| { |
| u16 pi = 0, max_entries, reply_qidx = 0, midx; |
| int retval = 0; |
| unsigned long flags; |
| u8 *req_entry; |
| void *segment_base_addr; |
| u16 req_sz = mrioc->facts.op_req_sz; |
| struct segments *segments = op_req_q->q_segments; |
| |
| reply_qidx = op_req_q->reply_qid - 1; |
| |
| if (mrioc->unrecoverable) |
| return -EFAULT; |
| |
| spin_lock_irqsave(&op_req_q->q_lock, flags); |
| pi = op_req_q->pi; |
| max_entries = op_req_q->num_requests; |
| |
| if (mpi3mr_check_req_qfull(op_req_q)) { |
| midx = REPLY_QUEUE_IDX_TO_MSIX_IDX( |
| reply_qidx, mrioc->op_reply_q_offset); |
| mpi3mr_process_op_reply_q(mrioc, &mrioc->intr_info[midx]); |
| |
| if (mpi3mr_check_req_qfull(op_req_q)) { |
| retval = -EAGAIN; |
| goto out; |
| } |
| } |
| |
| if (mrioc->reset_in_progress) { |
| ioc_err(mrioc, "OpReqQ submit reset in progress\n"); |
| retval = -EAGAIN; |
| goto out; |
| } |
| |
| segment_base_addr = segments[pi / op_req_q->segment_qd].segment; |
| req_entry = (u8 *)segment_base_addr + |
| ((pi % op_req_q->segment_qd) * req_sz); |
| |
| memset(req_entry, 0, req_sz); |
| memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ); |
| |
| if (++pi == max_entries) |
| pi = 0; |
| op_req_q->pi = pi; |
| |
| if (atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios) |
| > MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT) |
| mrioc->op_reply_qinfo[reply_qidx].enable_irq_poll = true; |
| |
| writel(op_req_q->pi, |
| &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index); |
| |
| out: |
| spin_unlock_irqrestore(&op_req_q->q_lock, flags); |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_sync_timestamp - Issue time stamp sync request |
| * @mrioc: Adapter reference |
| * |
| * Issue IO unit control MPI request to synchornize firmware |
| * timestamp with host time. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static int mpi3mr_sync_timestamp(struct mpi3mr_ioc *mrioc) |
| { |
| ktime_t current_time; |
| struct mpi3_iounit_control_request iou_ctrl; |
| int retval = 0; |
| |
| memset(&iou_ctrl, 0, sizeof(iou_ctrl)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue IOUCTL time_stamp: command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| iou_ctrl.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| iou_ctrl.function = MPI3_FUNCTION_IO_UNIT_CONTROL; |
| iou_ctrl.operation = MPI3_CTRL_OP_UPDATE_TIMESTAMP; |
| current_time = ktime_get_real(); |
| iou_ctrl.param64[0] = cpu_to_le64(ktime_to_ms(current_time)); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, |
| sizeof(iou_ctrl), 0); |
| if (retval) { |
| ioc_err(mrioc, "Issue IOUCTL time_stamp: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue IOUCTL time_stamp: command timed out\n"); |
| mrioc->init_cmds.is_waiting = 0; |
| mpi3mr_soft_reset_handler(mrioc, |
| MPI3MR_RESET_FROM_TSU_TIMEOUT, 1); |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Issue IOUCTL time_stamp: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| |
| out: |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_watchdog_work - watchdog thread to monitor faults |
| * @work: work struct |
| * |
| * Watch dog work periodically executed (1 second interval) to |
| * monitor firmware fault and to issue periodic timer sync to |
| * the firmware. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_watchdog_work(struct work_struct *work) |
| { |
| struct mpi3mr_ioc *mrioc = |
| container_of(work, struct mpi3mr_ioc, watchdog_work.work); |
| unsigned long flags; |
| enum mpi3mr_iocstate ioc_state; |
| u32 fault, host_diagnostic; |
| |
| if (mrioc->ts_update_counter++ >= MPI3MR_TSUPDATE_INTERVAL) { |
| mrioc->ts_update_counter = 0; |
| mpi3mr_sync_timestamp(mrioc); |
| } |
| |
| /*Check for fault state every one second and issue Soft reset*/ |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| if (ioc_state == MRIOC_STATE_FAULT) { |
| fault = readl(&mrioc->sysif_regs->fault) & |
| MPI3_SYSIF_FAULT_CODE_MASK; |
| host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); |
| if (host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS) { |
| if (!mrioc->diagsave_timeout) { |
| mpi3mr_print_fault_info(mrioc); |
| ioc_warn(mrioc, "Diag save in progress\n"); |
| } |
| if ((mrioc->diagsave_timeout++) <= |
| MPI3_SYSIF_DIAG_SAVE_TIMEOUT) |
| goto schedule_work; |
| } else |
| mpi3mr_print_fault_info(mrioc); |
| mrioc->diagsave_timeout = 0; |
| |
| if (fault == MPI3_SYSIF_FAULT_CODE_FACTORY_RESET) { |
| ioc_info(mrioc, |
| "Factory Reset fault occurred marking controller as unrecoverable" |
| ); |
| mrioc->unrecoverable = 1; |
| goto out; |
| } |
| |
| if ((fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) || |
| (fault == MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS) || |
| (mrioc->reset_in_progress)) |
| goto out; |
| if (fault == MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET) |
| mpi3mr_soft_reset_handler(mrioc, |
| MPI3MR_RESET_FROM_CIACTIV_FAULT, 0); |
| else |
| mpi3mr_soft_reset_handler(mrioc, |
| MPI3MR_RESET_FROM_FAULT_WATCH, 0); |
| } |
| |
| schedule_work: |
| spin_lock_irqsave(&mrioc->watchdog_lock, flags); |
| if (mrioc->watchdog_work_q) |
| queue_delayed_work(mrioc->watchdog_work_q, |
| &mrioc->watchdog_work, |
| msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); |
| spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); |
| out: |
| return; |
| } |
| |
| /** |
| * mpi3mr_start_watchdog - Start watchdog |
| * @mrioc: Adapter instance reference |
| * |
| * Create and start the watchdog thread to monitor controller |
| * faults. |
| * |
| * Return: Nothing. |
| */ |
| void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc) |
| { |
| if (mrioc->watchdog_work_q) |
| return; |
| |
| INIT_DELAYED_WORK(&mrioc->watchdog_work, mpi3mr_watchdog_work); |
| snprintf(mrioc->watchdog_work_q_name, |
| sizeof(mrioc->watchdog_work_q_name), "watchdog_%s%d", mrioc->name, |
| mrioc->id); |
| mrioc->watchdog_work_q = |
| create_singlethread_workqueue(mrioc->watchdog_work_q_name); |
| if (!mrioc->watchdog_work_q) { |
| ioc_err(mrioc, "%s: failed (line=%d)\n", __func__, __LINE__); |
| return; |
| } |
| |
| if (mrioc->watchdog_work_q) |
| queue_delayed_work(mrioc->watchdog_work_q, |
| &mrioc->watchdog_work, |
| msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); |
| } |
| |
| /** |
| * mpi3mr_stop_watchdog - Stop watchdog |
| * @mrioc: Adapter instance reference |
| * |
| * Stop the watchdog thread created to monitor controller |
| * faults. |
| * |
| * Return: Nothing. |
| */ |
| void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc) |
| { |
| unsigned long flags; |
| struct workqueue_struct *wq; |
| |
| spin_lock_irqsave(&mrioc->watchdog_lock, flags); |
| wq = mrioc->watchdog_work_q; |
| mrioc->watchdog_work_q = NULL; |
| spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); |
| if (wq) { |
| if (!cancel_delayed_work_sync(&mrioc->watchdog_work)) |
| flush_workqueue(wq); |
| destroy_workqueue(wq); |
| } |
| } |
| |
| /** |
| * mpi3mr_kill_ioc - Kill the controller |
| * @mrioc: Adapter instance reference |
| * @reason: reason for the failure. |
| * |
| * If fault debug is enabled, display the fault info else issue |
| * diag fault and freeze the system for controller debug |
| * purpose. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_kill_ioc(struct mpi3mr_ioc *mrioc, u32 reason) |
| { |
| enum mpi3mr_iocstate ioc_state; |
| |
| if (!mrioc->fault_dbg) |
| return; |
| |
| dump_stack(); |
| |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| if (ioc_state == MRIOC_STATE_FAULT) |
| mpi3mr_print_fault_info(mrioc); |
| else { |
| ioc_err(mrioc, "Firmware is halted due to the reason %d\n", |
| reason); |
| mpi3mr_diagfault_reset_handler(mrioc, reason); |
| } |
| if (mrioc->fault_dbg == 2) |
| for (;;) |
| ; |
| else |
| panic("panic in %s\n", __func__); |
| } |
| |
| /** |
| * mpi3mr_setup_admin_qpair - Setup admin queue pair |
| * @mrioc: Adapter instance reference |
| * |
| * Allocate memory for admin queue pair if required and register |
| * the admin queue with the controller. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc) |
| { |
| int retval = 0; |
| u32 num_admin_entries = 0; |
| |
| mrioc->admin_req_q_sz = MPI3MR_ADMIN_REQ_Q_SIZE; |
| mrioc->num_admin_req = mrioc->admin_req_q_sz / |
| MPI3MR_ADMIN_REQ_FRAME_SZ; |
| mrioc->admin_req_ci = mrioc->admin_req_pi = 0; |
| mrioc->admin_req_base = NULL; |
| |
| mrioc->admin_reply_q_sz = MPI3MR_ADMIN_REPLY_Q_SIZE; |
| mrioc->num_admin_replies = mrioc->admin_reply_q_sz / |
| MPI3MR_ADMIN_REPLY_FRAME_SZ; |
| mrioc->admin_reply_ci = 0; |
| mrioc->admin_reply_ephase = 1; |
| mrioc->admin_reply_base = NULL; |
| |
| if (!mrioc->admin_req_base) { |
| mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev, |
| mrioc->admin_req_q_sz, &mrioc->admin_req_dma, GFP_KERNEL); |
| |
| if (!mrioc->admin_req_base) { |
| retval = -1; |
| goto out_failed; |
| } |
| |
| mrioc->admin_reply_base = dma_alloc_coherent(&mrioc->pdev->dev, |
| mrioc->admin_reply_q_sz, &mrioc->admin_reply_dma, |
| GFP_KERNEL); |
| |
| if (!mrioc->admin_reply_base) { |
| retval = -1; |
| goto out_failed; |
| } |
| } |
| |
| num_admin_entries = (mrioc->num_admin_replies << 16) | |
| (mrioc->num_admin_req); |
| writel(num_admin_entries, &mrioc->sysif_regs->admin_queue_num_entries); |
| mpi3mr_writeq(mrioc->admin_req_dma, |
| &mrioc->sysif_regs->admin_request_queue_address); |
| mpi3mr_writeq(mrioc->admin_reply_dma, |
| &mrioc->sysif_regs->admin_reply_queue_address); |
| writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); |
| writel(mrioc->admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); |
| return retval; |
| |
| out_failed: |
| |
| if (mrioc->admin_reply_base) { |
| dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, |
| mrioc->admin_reply_base, mrioc->admin_reply_dma); |
| mrioc->admin_reply_base = NULL; |
| } |
| if (mrioc->admin_req_base) { |
| dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, |
| mrioc->admin_req_base, mrioc->admin_req_dma); |
| mrioc->admin_req_base = NULL; |
| } |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_issue_iocfacts - Send IOC Facts |
| * @mrioc: Adapter instance reference |
| * @facts_data: Cached IOC facts data |
| * |
| * Issue IOC Facts MPI request through admin queue and wait for |
| * the completion of it or time out. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_issue_iocfacts(struct mpi3mr_ioc *mrioc, |
| struct mpi3_ioc_facts_data *facts_data) |
| { |
| struct mpi3_ioc_facts_request iocfacts_req; |
| void *data = NULL; |
| dma_addr_t data_dma; |
| u32 data_len = sizeof(*facts_data); |
| int retval = 0; |
| u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; |
| |
| data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, |
| GFP_KERNEL); |
| |
| if (!data) { |
| retval = -1; |
| goto out; |
| } |
| |
| memset(&iocfacts_req, 0, sizeof(iocfacts_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue IOCFacts: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| iocfacts_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| iocfacts_req.function = MPI3_FUNCTION_IOC_FACTS; |
| |
| mpi3mr_add_sg_single(&iocfacts_req.sgl, sgl_flags, data_len, |
| data_dma); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &iocfacts_req, |
| sizeof(iocfacts_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "Issue IOCFacts: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue IOCFacts: command timed out\n"); |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Issue IOCFacts: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| memcpy(facts_data, (u8 *)data, data_len); |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| |
| out: |
| if (data) |
| dma_free_coherent(&mrioc->pdev->dev, data_len, data, data_dma); |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_check_reset_dma_mask - Process IOC facts data |
| * @mrioc: Adapter instance reference |
| * |
| * Check whether the new DMA mask requested through IOCFacts by |
| * firmware needs to be set, if so set it . |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| static inline int mpi3mr_check_reset_dma_mask(struct mpi3mr_ioc *mrioc) |
| { |
| struct pci_dev *pdev = mrioc->pdev; |
| int r; |
| u64 facts_dma_mask = DMA_BIT_MASK(mrioc->facts.dma_mask); |
| |
| if (!mrioc->facts.dma_mask || (mrioc->dma_mask <= facts_dma_mask)) |
| return 0; |
| |
| ioc_info(mrioc, "Changing DMA mask from 0x%016llx to 0x%016llx\n", |
| mrioc->dma_mask, facts_dma_mask); |
| |
| r = dma_set_mask_and_coherent(&pdev->dev, facts_dma_mask); |
| if (r) { |
| ioc_err(mrioc, "Setting DMA mask to 0x%016llx failed: %d\n", |
| facts_dma_mask, r); |
| return r; |
| } |
| mrioc->dma_mask = facts_dma_mask; |
| return r; |
| } |
| |
| /** |
| * mpi3mr_process_factsdata - Process IOC facts data |
| * @mrioc: Adapter instance reference |
| * @facts_data: Cached IOC facts data |
| * |
| * Convert IOC facts data into cpu endianness and cache it in |
| * the driver . |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, |
| struct mpi3_ioc_facts_data *facts_data) |
| { |
| u32 ioc_config, req_sz, facts_flags; |
| |
| if ((le16_to_cpu(facts_data->ioc_facts_data_length)) != |
| (sizeof(*facts_data) / 4)) { |
| ioc_warn(mrioc, |
| "IOCFactsdata length mismatch driver_sz(%zu) firmware_sz(%d)\n", |
| sizeof(*facts_data), |
| le16_to_cpu(facts_data->ioc_facts_data_length) * 4); |
| } |
| |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| req_sz = 1 << ((ioc_config & MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ) >> |
| MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT); |
| if (le16_to_cpu(facts_data->ioc_request_frame_size) != (req_sz / 4)) { |
| ioc_err(mrioc, |
| "IOCFacts data reqFrameSize mismatch hw_size(%d) firmware_sz(%d)\n", |
| req_sz / 4, le16_to_cpu(facts_data->ioc_request_frame_size)); |
| } |
| |
| memset(&mrioc->facts, 0, sizeof(mrioc->facts)); |
| |
| facts_flags = le32_to_cpu(facts_data->flags); |
| mrioc->facts.op_req_sz = req_sz; |
| mrioc->op_reply_desc_sz = 1 << ((ioc_config & |
| MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ) >> |
| MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT); |
| |
| mrioc->facts.ioc_num = facts_data->ioc_number; |
| mrioc->facts.who_init = facts_data->who_init; |
| mrioc->facts.max_msix_vectors = le16_to_cpu(facts_data->max_msix_vectors); |
| mrioc->facts.personality = (facts_flags & |
| MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK); |
| mrioc->facts.dma_mask = (facts_flags & |
| MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >> |
| MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT; |
| mrioc->facts.protocol_flags = facts_data->protocol_flags; |
| mrioc->facts.mpi_version = le32_to_cpu(facts_data->mpi_version.word); |
| mrioc->facts.max_reqs = le16_to_cpu(facts_data->max_outstanding_request); |
| mrioc->facts.product_id = le16_to_cpu(facts_data->product_id); |
| mrioc->facts.reply_sz = le16_to_cpu(facts_data->reply_frame_size) * 4; |
| mrioc->facts.exceptions = le16_to_cpu(facts_data->ioc_exceptions); |
| mrioc->facts.max_perids = le16_to_cpu(facts_data->max_persistent_id); |
| mrioc->facts.max_pds = le16_to_cpu(facts_data->max_pds); |
| mrioc->facts.max_vds = le16_to_cpu(facts_data->max_vds); |
| mrioc->facts.max_hpds = le16_to_cpu(facts_data->max_host_pds); |
| mrioc->facts.max_advhpds = le16_to_cpu(facts_data->max_advanced_host_pds); |
| mrioc->facts.max_raidpds = le16_to_cpu(facts_data->max_raid_pds); |
| mrioc->facts.max_nvme = le16_to_cpu(facts_data->max_nvme); |
| mrioc->facts.max_pcie_switches = |
| le16_to_cpu(facts_data->max_pc_ie_switches); |
| mrioc->facts.max_sasexpanders = |
| le16_to_cpu(facts_data->max_sas_expanders); |
| mrioc->facts.max_sasinitiators = |
| le16_to_cpu(facts_data->max_sas_initiators); |
| mrioc->facts.max_enclosures = le16_to_cpu(facts_data->max_enclosures); |
| mrioc->facts.min_devhandle = le16_to_cpu(facts_data->min_dev_handle); |
| mrioc->facts.max_devhandle = le16_to_cpu(facts_data->max_dev_handle); |
| mrioc->facts.max_op_req_q = |
| le16_to_cpu(facts_data->max_operational_request_queues); |
| mrioc->facts.max_op_reply_q = |
| le16_to_cpu(facts_data->max_operational_reply_queues); |
| mrioc->facts.ioc_capabilities = |
| le32_to_cpu(facts_data->ioc_capabilities); |
| mrioc->facts.fw_ver.build_num = |
| le16_to_cpu(facts_data->fw_version.build_num); |
| mrioc->facts.fw_ver.cust_id = |
| le16_to_cpu(facts_data->fw_version.customer_id); |
| mrioc->facts.fw_ver.ph_minor = facts_data->fw_version.phase_minor; |
| mrioc->facts.fw_ver.ph_major = facts_data->fw_version.phase_major; |
| mrioc->facts.fw_ver.gen_minor = facts_data->fw_version.gen_minor; |
| mrioc->facts.fw_ver.gen_major = facts_data->fw_version.gen_major; |
| mrioc->msix_count = min_t(int, mrioc->msix_count, |
| mrioc->facts.max_msix_vectors); |
| mrioc->facts.sge_mod_mask = facts_data->sge_modifier_mask; |
| mrioc->facts.sge_mod_value = facts_data->sge_modifier_value; |
| mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift; |
| mrioc->facts.shutdown_timeout = |
| le16_to_cpu(facts_data->shutdown_timeout); |
| |
| ioc_info(mrioc, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),", |
| mrioc->facts.ioc_num, mrioc->facts.max_op_req_q, |
| mrioc->facts.max_op_reply_q, mrioc->facts.max_devhandle); |
| ioc_info(mrioc, |
| "maxreqs(%d), mindh(%d) maxPDs(%d) maxvectors(%d) maxperids(%d)\n", |
| mrioc->facts.max_reqs, mrioc->facts.min_devhandle, |
| mrioc->facts.max_pds, mrioc->facts.max_msix_vectors, |
| mrioc->facts.max_perids); |
| ioc_info(mrioc, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x ", |
| mrioc->facts.sge_mod_mask, mrioc->facts.sge_mod_value, |
| mrioc->facts.sge_mod_shift); |
| ioc_info(mrioc, "DMA mask %d InitialPE status 0x%x\n", |
| mrioc->facts.dma_mask, (facts_flags & |
| MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK)); |
| |
| mrioc->max_host_ios = mrioc->facts.max_reqs - MPI3MR_INTERNAL_CMDS_RESVD; |
| |
| if (reset_devices) |
| mrioc->max_host_ios = min_t(int, mrioc->max_host_ios, |
| MPI3MR_HOST_IOS_KDUMP); |
| } |
| |
| /** |
| * mpi3mr_alloc_reply_sense_bufs - Send IOC Init |
| * @mrioc: Adapter instance reference |
| * |
| * Allocate and initialize the reply free buffers, sense |
| * buffers, reply free queue and sense buffer queue. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc) |
| { |
| int retval = 0; |
| u32 sz, i; |
| dma_addr_t phy_addr; |
| |
| if (mrioc->init_cmds.reply) |
| goto post_reply_sbuf; |
| |
| mrioc->init_cmds.reply = kzalloc(mrioc->facts.reply_sz, GFP_KERNEL); |
| if (!mrioc->init_cmds.reply) |
| goto out_failed; |
| |
| for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { |
| mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->facts.reply_sz, |
| GFP_KERNEL); |
| if (!mrioc->dev_rmhs_cmds[i].reply) |
| goto out_failed; |
| } |
| |
| mrioc->host_tm_cmds.reply = kzalloc(mrioc->facts.reply_sz, GFP_KERNEL); |
| if (!mrioc->host_tm_cmds.reply) |
| goto out_failed; |
| |
| mrioc->dev_handle_bitmap_sz = mrioc->facts.max_devhandle / 8; |
| if (mrioc->facts.max_devhandle % 8) |
| mrioc->dev_handle_bitmap_sz++; |
| mrioc->removepend_bitmap = kzalloc(mrioc->dev_handle_bitmap_sz, |
| GFP_KERNEL); |
| if (!mrioc->removepend_bitmap) |
| goto out_failed; |
| |
| mrioc->devrem_bitmap_sz = MPI3MR_NUM_DEVRMCMD / 8; |
| if (MPI3MR_NUM_DEVRMCMD % 8) |
| mrioc->devrem_bitmap_sz++; |
| mrioc->devrem_bitmap = kzalloc(mrioc->devrem_bitmap_sz, |
| GFP_KERNEL); |
| if (!mrioc->devrem_bitmap) |
| goto out_failed; |
| |
| mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES; |
| mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1; |
| mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR; |
| mrioc->sense_buf_q_sz = mrioc->num_sense_bufs + 1; |
| |
| /* reply buffer pool, 16 byte align */ |
| sz = mrioc->num_reply_bufs * mrioc->facts.reply_sz; |
| mrioc->reply_buf_pool = dma_pool_create("reply_buf pool", |
| &mrioc->pdev->dev, sz, 16, 0); |
| if (!mrioc->reply_buf_pool) { |
| ioc_err(mrioc, "reply buf pool: dma_pool_create failed\n"); |
| goto out_failed; |
| } |
| |
| mrioc->reply_buf = dma_pool_zalloc(mrioc->reply_buf_pool, GFP_KERNEL, |
| &mrioc->reply_buf_dma); |
| if (!mrioc->reply_buf) |
| goto out_failed; |
| |
| mrioc->reply_buf_dma_max_address = mrioc->reply_buf_dma + sz; |
| |
| /* reply free queue, 8 byte align */ |
| sz = mrioc->reply_free_qsz * 8; |
| mrioc->reply_free_q_pool = dma_pool_create("reply_free_q pool", |
| &mrioc->pdev->dev, sz, 8, 0); |
| if (!mrioc->reply_free_q_pool) { |
| ioc_err(mrioc, "reply_free_q pool: dma_pool_create failed\n"); |
| goto out_failed; |
| } |
| mrioc->reply_free_q = dma_pool_zalloc(mrioc->reply_free_q_pool, |
| GFP_KERNEL, &mrioc->reply_free_q_dma); |
| if (!mrioc->reply_free_q) |
| goto out_failed; |
| |
| /* sense buffer pool, 4 byte align */ |
| sz = mrioc->num_sense_bufs * MPI3MR_SENSEBUF_SZ; |
| mrioc->sense_buf_pool = dma_pool_create("sense_buf pool", |
| &mrioc->pdev->dev, sz, 4, 0); |
| if (!mrioc->sense_buf_pool) { |
| ioc_err(mrioc, "sense_buf pool: dma_pool_create failed\n"); |
| goto out_failed; |
| } |
| mrioc->sense_buf = dma_pool_zalloc(mrioc->sense_buf_pool, GFP_KERNEL, |
| &mrioc->sense_buf_dma); |
| if (!mrioc->sense_buf) |
| goto out_failed; |
| |
| /* sense buffer queue, 8 byte align */ |
| sz = mrioc->sense_buf_q_sz * 8; |
| mrioc->sense_buf_q_pool = dma_pool_create("sense_buf_q pool", |
| &mrioc->pdev->dev, sz, 8, 0); |
| if (!mrioc->sense_buf_q_pool) { |
| ioc_err(mrioc, "sense_buf_q pool: dma_pool_create failed\n"); |
| goto out_failed; |
| } |
| mrioc->sense_buf_q = dma_pool_zalloc(mrioc->sense_buf_q_pool, |
| GFP_KERNEL, &mrioc->sense_buf_q_dma); |
| if (!mrioc->sense_buf_q) |
| goto out_failed; |
| |
| post_reply_sbuf: |
| sz = mrioc->num_reply_bufs * mrioc->facts.reply_sz; |
| ioc_info(mrioc, |
| "reply buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", |
| mrioc->reply_buf, mrioc->num_reply_bufs, mrioc->facts.reply_sz, |
| (sz / 1024), (unsigned long long)mrioc->reply_buf_dma); |
| sz = mrioc->reply_free_qsz * 8; |
| ioc_info(mrioc, |
| "reply_free_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", |
| mrioc->reply_free_q, mrioc->reply_free_qsz, 8, (sz / 1024), |
| (unsigned long long)mrioc->reply_free_q_dma); |
| sz = mrioc->num_sense_bufs * MPI3MR_SENSEBUF_SZ; |
| ioc_info(mrioc, |
| "sense_buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", |
| mrioc->sense_buf, mrioc->num_sense_bufs, MPI3MR_SENSEBUF_SZ, |
| (sz / 1024), (unsigned long long)mrioc->sense_buf_dma); |
| sz = mrioc->sense_buf_q_sz * 8; |
| ioc_info(mrioc, |
| "sense_buf_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", |
| mrioc->sense_buf_q, mrioc->sense_buf_q_sz, 8, (sz / 1024), |
| (unsigned long long)mrioc->sense_buf_q_dma); |
| |
| /* initialize Reply buffer Queue */ |
| for (i = 0, phy_addr = mrioc->reply_buf_dma; |
| i < mrioc->num_reply_bufs; i++, phy_addr += mrioc->facts.reply_sz) |
| mrioc->reply_free_q[i] = cpu_to_le64(phy_addr); |
| mrioc->reply_free_q[i] = cpu_to_le64(0); |
| |
| /* initialize Sense Buffer Queue */ |
| for (i = 0, phy_addr = mrioc->sense_buf_dma; |
| i < mrioc->num_sense_bufs; i++, phy_addr += MPI3MR_SENSEBUF_SZ) |
| mrioc->sense_buf_q[i] = cpu_to_le64(phy_addr); |
| mrioc->sense_buf_q[i] = cpu_to_le64(0); |
| return retval; |
| |
| out_failed: |
| retval = -1; |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_issue_iocinit - Send IOC Init |
| * @mrioc: Adapter instance reference |
| * |
| * Issue IOC Init MPI request through admin queue and wait for |
| * the completion of it or time out. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) |
| { |
| struct mpi3_ioc_init_request iocinit_req; |
| struct mpi3_driver_info_layout *drv_info; |
| dma_addr_t data_dma; |
| u32 data_len = sizeof(*drv_info); |
| int retval = 0; |
| ktime_t current_time; |
| |
| drv_info = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, |
| GFP_KERNEL); |
| if (!drv_info) { |
| retval = -1; |
| goto out; |
| } |
| drv_info->information_length = cpu_to_le32(data_len); |
| strncpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); |
| strncpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); |
| drv_info->os_name[sizeof(drv_info->os_name) - 1] = 0; |
| strncpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); |
| drv_info->os_version[sizeof(drv_info->os_version) - 1] = 0; |
| strncpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); |
| strncpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); |
| strncpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, sizeof(drv_info->driver_release_date)); |
| drv_info->driver_capabilities = 0; |
| memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info, |
| sizeof(mrioc->driver_info)); |
| |
| memset(&iocinit_req, 0, sizeof(iocinit_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue IOCInit: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| iocinit_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| iocinit_req.function = MPI3_FUNCTION_IOC_INIT; |
| iocinit_req.mpi_version.mpi3_version.dev = MPI3_VERSION_DEV; |
| iocinit_req.mpi_version.mpi3_version.unit = MPI3_VERSION_UNIT; |
| iocinit_req.mpi_version.mpi3_version.major = MPI3_VERSION_MAJOR; |
| iocinit_req.mpi_version.mpi3_version.minor = MPI3_VERSION_MINOR; |
| iocinit_req.who_init = MPI3_WHOINIT_HOST_DRIVER; |
| iocinit_req.reply_free_queue_depth = cpu_to_le16(mrioc->reply_free_qsz); |
| iocinit_req.reply_free_queue_address = |
| cpu_to_le64(mrioc->reply_free_q_dma); |
| iocinit_req.sense_buffer_length = cpu_to_le16(MPI3MR_SENSEBUF_SZ); |
| iocinit_req.sense_buffer_free_queue_depth = |
| cpu_to_le16(mrioc->sense_buf_q_sz); |
| iocinit_req.sense_buffer_free_queue_address = |
| cpu_to_le64(mrioc->sense_buf_q_dma); |
| iocinit_req.driver_information_address = cpu_to_le64(data_dma); |
| |
| current_time = ktime_get_real(); |
| iocinit_req.time_stamp = cpu_to_le64(ktime_to_ms(current_time)); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &iocinit_req, |
| sizeof(iocinit_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "Issue IOCInit: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_IOCINIT_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| ioc_err(mrioc, "Issue IOCInit: command timed out\n"); |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Issue IOCInit: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| |
| out: |
| if (drv_info) |
| dma_free_coherent(&mrioc->pdev->dev, data_len, drv_info, |
| data_dma); |
| |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_unmask_events - Unmask events in event mask bitmap |
| * @mrioc: Adapter instance reference |
| * @event: MPI event ID |
| * |
| * Un mask the specific event by resetting the event_mask |
| * bitmap. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event) |
| { |
| u32 desired_event; |
| u8 word; |
| |
| if (event >= 128) |
| return; |
| |
| desired_event = (1 << (event % 32)); |
| word = event / 32; |
| |
| mrioc->event_masks[word] &= ~desired_event; |
| } |
| |
| /** |
| * mpi3mr_issue_event_notification - Send event notification |
| * @mrioc: Adapter instance reference |
| * |
| * Issue event notification MPI request through admin queue and |
| * wait for the completion of it or time out. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc) |
| { |
| struct mpi3_event_notification_request evtnotify_req; |
| int retval = 0; |
| u8 i; |
| |
| memset(&evtnotify_req, 0, sizeof(evtnotify_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| evtnotify_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| evtnotify_req.function = MPI3_FUNCTION_EVENT_NOTIFICATION; |
| for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| evtnotify_req.event_masks[i] = |
| cpu_to_le32(mrioc->event_masks[i]); |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req, |
| sizeof(evtnotify_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Issue EvtNotify: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_send_event_ack - Send event acknowledgment |
| * @mrioc: Adapter instance reference |
| * @event: MPI3 event ID |
| * @event_ctx: Event context |
| * |
| * Send event acknowledgment through admin queue and wait for |
| * it to complete. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event, |
| u32 event_ctx) |
| { |
| struct mpi3_event_ack_request evtack_req; |
| int retval = 0; |
| |
| memset(&evtack_req, 0, sizeof(evtack_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Send EvtAck: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| evtack_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| evtack_req.function = MPI3_FUNCTION_EVENT_ACK; |
| evtack_req.event = event; |
| evtack_req.event_context = cpu_to_le32(event_ctx); |
| |
| init_completion(&mrioc->init_cmds.done); |
| retval = mpi3mr_admin_request_post(mrioc, &evtack_req, |
| sizeof(evtack_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "Send EvtAck: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (MPI3MR_INTADMCMD_TIMEOUT * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); |
| mpi3mr_soft_reset_handler(mrioc, |
| MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1); |
| retval = -1; |
| goto out_unlock; |
| } |
| if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) |
| != MPI3_IOCSTATUS_SUCCESS) { |
| ioc_err(mrioc, |
| "Send EvtAck: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", |
| (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), |
| mrioc->init_cmds.ioc_loginfo); |
| retval = -1; |
| goto out_unlock; |
| } |
| |
| out_unlock: |
| mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_alloc_chain_bufs - Allocate chain buffers |
| * @mrioc: Adapter instance reference |
| * |
| * Allocate chain buffers and set a bitmap to indicate free |
| * chain buffers. Chain buffers are used to pass the SGE |
| * information along with MPI3 SCSI IO requests for host I/O. |
| * |
| * Return: 0 on success, non-zero on failure |
| */ |
| static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc) |
| { |
| int retval = 0; |
| u32 sz, i; |
| u16 num_chains; |
| |
| num_chains = mrioc->max_host_ios / MPI3MR_CHAINBUF_FACTOR; |
| |
| if (prot_mask & (SHOST_DIX_TYPE0_PROTECTION |
| | SHOST_DIX_TYPE1_PROTECTION |
| | SHOST_DIX_TYPE2_PROTECTION |
| | SHOST_DIX_TYPE3_PROTECTION)) |
| num_chains += (num_chains / MPI3MR_CHAINBUFDIX_FACTOR); |
| |
| mrioc->chain_buf_count = num_chains; |
| sz = sizeof(struct chain_element) * num_chains; |
| mrioc->chain_sgl_list = kzalloc(sz, GFP_KERNEL); |
| if (!mrioc->chain_sgl_list) |
| goto out_failed; |
| |
| sz = MPI3MR_PAGE_SIZE_4K; |
| mrioc->chain_buf_pool = dma_pool_create("chain_buf pool", |
| &mrioc->pdev->dev, sz, 16, 0); |
| if (!mrioc->chain_buf_pool) { |
| ioc_err(mrioc, "chain buf pool: dma_pool_create failed\n"); |
| goto out_failed; |
| } |
| |
| for (i = 0; i < num_chains; i++) { |
| mrioc->chain_sgl_list[i].addr = |
| dma_pool_zalloc(mrioc->chain_buf_pool, GFP_KERNEL, |
| &mrioc->chain_sgl_list[i].dma_addr); |
| |
| if (!mrioc->chain_sgl_list[i].addr) |
| goto out_failed; |
| } |
| mrioc->chain_bitmap_sz = num_chains / 8; |
| if (num_chains % 8) |
| mrioc->chain_bitmap_sz++; |
| mrioc->chain_bitmap = kzalloc(mrioc->chain_bitmap_sz, GFP_KERNEL); |
| if (!mrioc->chain_bitmap) |
| goto out_failed; |
| return retval; |
| out_failed: |
| retval = -1; |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_port_enable_complete - Mark port enable complete |
| * @mrioc: Adapter instance reference |
| * @drv_cmd: Internal command tracker |
| * |
| * Call back for asynchronous port enable request sets the |
| * driver command to indicate port enable request is complete. |
| * |
| * Return: Nothing |
| */ |
| static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_drv_cmd *drv_cmd) |
| { |
| drv_cmd->state = MPI3MR_CMD_NOTUSED; |
| drv_cmd->callback = NULL; |
| mrioc->scan_failed = drv_cmd->ioc_status; |
| mrioc->scan_started = 0; |
| } |
| |
| /** |
| * mpi3mr_issue_port_enable - Issue Port Enable |
| * @mrioc: Adapter instance reference |
| * @async: Flag to wait for completion or not |
| * |
| * Issue Port Enable MPI request through admin queue and if the |
| * async flag is not set wait for the completion of the port |
| * enable or time out. |
| * |
| * Return: 0 on success, non-zero on failures. |
| */ |
| int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async) |
| { |
| struct mpi3_port_enable_request pe_req; |
| int retval = 0; |
| u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT; |
| |
| memset(&pe_req, 0, sizeof(pe_req)); |
| mutex_lock(&mrioc->init_cmds.mutex); |
| if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { |
| retval = -1; |
| ioc_err(mrioc, "Issue PortEnable: Init command is in use\n"); |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| goto out; |
| } |
| mrioc->init_cmds.state = MPI3MR_CMD_PENDING; |
| if (async) { |
| mrioc->init_cmds.is_waiting = 0; |
| mrioc->init_cmds.callback = mpi3mr_port_enable_complete; |
| } else { |
| mrioc->init_cmds.is_waiting = 1; |
| mrioc->init_cmds.callback = NULL; |
| init_completion(&mrioc->init_cmds.done); |
| } |
| pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); |
| pe_req.function = MPI3_FUNCTION_PORT_ENABLE; |
| |
| retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1); |
| if (retval) { |
| ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n"); |
| goto out_unlock; |
| } |
| if (!async) { |
| wait_for_completion_timeout(&mrioc->init_cmds.done, |
| (pe_timeout * HZ)); |
| if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { |
| ioc_err(mrioc, "Issue PortEnable: command timed out\n"); |
| retval = -1; |
| mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR; |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, |
| MPI3MR_RESET_FROM_PE_TIMEOUT); |
| mrioc->unrecoverable = 1; |
| goto out_unlock; |
| } |
| mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds); |
| } |
| out_unlock: |
| mutex_unlock(&mrioc->init_cmds.mutex); |
| out: |
| return retval; |
| } |
| |
| /* Protocol type to name mapper structure*/ |
| static const struct { |
| u8 protocol; |
| char *name; |
| } mpi3mr_protocols[] = { |
| { MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR, "Initiator" }, |
| { MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET, "Target" }, |
| { MPI3_IOCFACTS_PROTOCOL_NVME, "NVMe attachment" }, |
| }; |
| |
| /* Capability to name mapper structure*/ |
| static const struct { |
| u32 capability; |
| char *name; |
| } mpi3mr_capabilities[] = { |
| { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" }, |
| }; |
| |
| /** |
| * mpi3mr_print_ioc_info - Display controller information |
| * @mrioc: Adapter instance reference |
| * |
| * Display controller personalit, capability, supported |
| * protocols etc. |
| * |
| * Return: Nothing |
| */ |
| static void |
| mpi3mr_print_ioc_info(struct mpi3mr_ioc *mrioc) |
| { |
| int i = 0, bytes_wrote = 0; |
| char personality[16]; |
| char protocol[50] = {0}; |
| char capabilities[100] = {0}; |
| bool is_string_nonempty = false; |
| struct mpi3mr_compimg_ver *fwver = &mrioc->facts.fw_ver; |
| |
| switch (mrioc->facts.personality) { |
| case MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA: |
| strncpy(personality, "Enhanced HBA", sizeof(personality)); |
| break; |
| case MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR: |
| strncpy(personality, "RAID", sizeof(personality)); |
| break; |
| default: |
| strncpy(personality, "Unknown", sizeof(personality)); |
| break; |
| } |
| |
| ioc_info(mrioc, "Running in %s Personality", personality); |
| |
| ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n", |
| fwver->gen_major, fwver->gen_minor, fwver->ph_major, |
| fwver->ph_minor, fwver->cust_id, fwver->build_num); |
| |
| for (i = 0; i < ARRAY_SIZE(mpi3mr_protocols); i++) { |
| if (mrioc->facts.protocol_flags & |
| mpi3mr_protocols[i].protocol) { |
| if (is_string_nonempty && |
| (bytes_wrote < sizeof(protocol))) |
| bytes_wrote += snprintf(protocol + bytes_wrote, |
| (sizeof(protocol) - bytes_wrote), ","); |
| |
| if (bytes_wrote < sizeof(protocol)) |
| bytes_wrote += snprintf(protocol + bytes_wrote, |
| (sizeof(protocol) - bytes_wrote), "%s", |
| mpi3mr_protocols[i].name); |
| is_string_nonempty = true; |
| } |
| } |
| |
| bytes_wrote = 0; |
| is_string_nonempty = false; |
| for (i = 0; i < ARRAY_SIZE(mpi3mr_capabilities); i++) { |
| if (mrioc->facts.protocol_flags & |
| mpi3mr_capabilities[i].capability) { |
| if (is_string_nonempty && |
| (bytes_wrote < sizeof(capabilities))) |
| bytes_wrote += snprintf(capabilities + bytes_wrote, |
| (sizeof(capabilities) - bytes_wrote), ","); |
| |
| if (bytes_wrote < sizeof(capabilities)) |
| bytes_wrote += snprintf(capabilities + bytes_wrote, |
| (sizeof(capabilities) - bytes_wrote), "%s", |
| mpi3mr_capabilities[i].name); |
| is_string_nonempty = true; |
| } |
| } |
| |
| ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n", |
| protocol, capabilities); |
| } |
| |
| /** |
| * mpi3mr_cleanup_resources - Free PCI resources |
| * @mrioc: Adapter instance reference |
| * |
| * Unmap PCI device memory and disable PCI device. |
| * |
| * Return: 0 on success and non-zero on failure. |
| */ |
| void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc) |
| { |
| struct pci_dev *pdev = mrioc->pdev; |
| |
| mpi3mr_cleanup_isr(mrioc); |
| |
| if (mrioc->sysif_regs) { |
| iounmap((void __iomem *)mrioc->sysif_regs); |
| mrioc->sysif_regs = NULL; |
| } |
| |
| if (pci_is_enabled(pdev)) { |
| if (mrioc->bars) |
| pci_release_selected_regions(pdev, mrioc->bars); |
| pci_disable_device(pdev); |
| } |
| } |
| |
| /** |
| * mpi3mr_setup_resources - Enable PCI resources |
| * @mrioc: Adapter instance reference |
| * |
| * Enable PCI device memory, MSI-x registers and set DMA mask. |
| * |
| * Return: 0 on success and non-zero on failure. |
| */ |
| int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc) |
| { |
| struct pci_dev *pdev = mrioc->pdev; |
| u32 memap_sz = 0; |
| int i, retval = 0, capb = 0; |
| u16 message_control; |
| u64 dma_mask = mrioc->dma_mask ? mrioc->dma_mask : |
| (((dma_get_required_mask(&pdev->dev) > DMA_BIT_MASK(32)) && |
| (sizeof(dma_addr_t) > 4)) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32)); |
| |
| if (pci_enable_device_mem(pdev)) { |
| ioc_err(mrioc, "pci_enable_device_mem: failed\n"); |
| retval = -ENODEV; |
| goto out_failed; |
| } |
| |
| capb = pci_find_capability(pdev, PCI_CAP_ID_MSIX); |
| if (!capb) { |
| ioc_err(mrioc, "Unable to find MSI-X Capabilities\n"); |
| retval = -ENODEV; |
| goto out_failed; |
| } |
| mrioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); |
| |
| if (pci_request_selected_regions(pdev, mrioc->bars, |
| mrioc->driver_name)) { |
| ioc_err(mrioc, "pci_request_selected_regions: failed\n"); |
| retval = -ENODEV; |
| goto out_failed; |
| } |
| |
| for (i = 0; (i < DEVICE_COUNT_RESOURCE); i++) { |
| if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { |
| mrioc->sysif_regs_phys = pci_resource_start(pdev, i); |
| memap_sz = pci_resource_len(pdev, i); |
| mrioc->sysif_regs = |
| ioremap(mrioc->sysif_regs_phys, memap_sz); |
| break; |
| } |
| } |
| |
| pci_set_master(pdev); |
| |
| retval = dma_set_mask_and_coherent(&pdev->dev, dma_mask); |
| if (retval) { |
| if (dma_mask != DMA_BIT_MASK(32)) { |
| ioc_warn(mrioc, "Setting 64 bit DMA mask failed\n"); |
| dma_mask = DMA_BIT_MASK(32); |
| retval = dma_set_mask_and_coherent(&pdev->dev, |
| dma_mask); |
| } |
| if (retval) { |
| mrioc->dma_mask = 0; |
| ioc_err(mrioc, "Setting 32 bit DMA mask also failed\n"); |
| goto out_failed; |
| } |
| } |
| mrioc->dma_mask = dma_mask; |
| |
| if (!mrioc->sysif_regs) { |
| ioc_err(mrioc, |
| "Unable to map adapter memory or resource not found\n"); |
| retval = -EINVAL; |
| goto out_failed; |
| } |
| |
| pci_read_config_word(pdev, capb + 2, &message_control); |
| mrioc->msix_count = (message_control & 0x3FF) + 1; |
| |
| pci_save_state(pdev); |
| |
| pci_set_drvdata(pdev, mrioc->shost); |
| |
| mpi3mr_ioc_disable_intr(mrioc); |
| |
| ioc_info(mrioc, "iomem(0x%016llx), mapped(0x%p), size(%d)\n", |
| (unsigned long long)mrioc->sysif_regs_phys, |
| mrioc->sysif_regs, memap_sz); |
| ioc_info(mrioc, "Number of MSI-X vectors found in capabilities: (%d)\n", |
| mrioc->msix_count); |
| return retval; |
| |
| out_failed: |
| mpi3mr_cleanup_resources(mrioc); |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_init_ioc - Initialize the controller |
| * @mrioc: Adapter instance reference |
| * @re_init: Flag to indicate is this fresh init or re-init |
| * |
| * This the controller initialization routine, executed either |
| * after soft reset or from pci probe callback. |
| * Setup the required resources, memory map the controller |
| * registers, create admin and operational reply queue pairs, |
| * allocate required memory for reply pool, sense buffer pool, |
| * issue IOC init request to the firmware, unmask the events and |
| * issue port enable to discover SAS/SATA/NVMe devies and RAID |
| * volumes. |
| * |
| * Return: 0 on success and non-zero on failure. |
| */ |
| int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init) |
| { |
| int retval = 0; |
| enum mpi3mr_iocstate ioc_state; |
| u64 base_info; |
| u32 timeout; |
| u32 ioc_status, ioc_config, i; |
| struct mpi3_ioc_facts_data facts_data; |
| |
| mrioc->irqpoll_sleep = MPI3MR_IRQ_POLL_SLEEP; |
| mrioc->change_count = 0; |
| if (!re_init) { |
| mrioc->cpu_count = num_online_cpus(); |
| retval = mpi3mr_setup_resources(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to setup resources:error %d\n", |
| retval); |
| goto out_nocleanup; |
| } |
| } |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| |
| ioc_info(mrioc, "SOD status %x configuration %x\n", |
| ioc_status, ioc_config); |
| |
| base_info = lo_hi_readq(&mrioc->sysif_regs->ioc_information); |
| ioc_info(mrioc, "SOD base_info %llx\n", base_info); |
| |
| /*The timeout value is in 2sec unit, changing it to seconds*/ |
| mrioc->ready_timeout = |
| ((base_info & MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK) >> |
| MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT) * 2; |
| |
| ioc_info(mrioc, "IOC ready timeout %d\n", mrioc->ready_timeout); |
| |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| ioc_info(mrioc, "IOC in %s state during detection\n", |
| mpi3mr_iocstate_name(ioc_state)); |
| |
| if (ioc_state == MRIOC_STATE_BECOMING_READY || |
| ioc_state == MRIOC_STATE_RESET_REQUESTED) { |
| timeout = mrioc->ready_timeout * 10; |
| do { |
| msleep(100); |
| } while (--timeout); |
| |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| ioc_info(mrioc, |
| "IOC in %s state after waiting for reset time\n", |
| mpi3mr_iocstate_name(ioc_state)); |
| } |
| |
| if (ioc_state == MRIOC_STATE_READY) { |
| retval = mpi3mr_issue_and_process_mur(mrioc, |
| MPI3MR_RESET_FROM_BRINGUP); |
| if (retval) { |
| ioc_err(mrioc, "Failed to MU reset IOC error %d\n", |
| retval); |
| } |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| } |
| if (ioc_state != MRIOC_STATE_RESET) { |
| mpi3mr_print_fault_info(mrioc); |
| retval = mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, |
| MPI3MR_RESET_FROM_BRINGUP); |
| if (retval) { |
| ioc_err(mrioc, |
| "%s :Failed to soft reset IOC error %d\n", |
| __func__, retval); |
| goto out_failed; |
| } |
| } |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| if (ioc_state != MRIOC_STATE_RESET) { |
| retval = -1; |
| ioc_err(mrioc, "Cannot bring IOC to reset state\n"); |
| goto out_failed; |
| } |
| |
| retval = mpi3mr_setup_admin_qpair(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to setup admin Qs: error %d\n", |
| retval); |
| goto out_failed; |
| } |
| |
| retval = mpi3mr_bring_ioc_ready(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to bring ioc ready: error %d\n", |
| retval); |
| goto out_failed; |
| } |
| |
| if (!re_init) { |
| retval = mpi3mr_setup_isr(mrioc, 1); |
| if (retval) { |
| ioc_err(mrioc, "Failed to setup ISR error %d\n", |
| retval); |
| goto out_failed; |
| } |
| } else |
| mpi3mr_ioc_enable_intr(mrioc); |
| |
| retval = mpi3mr_issue_iocfacts(mrioc, &facts_data); |
| if (retval) { |
| ioc_err(mrioc, "Failed to Issue IOC Facts %d\n", |
| retval); |
| goto out_failed; |
| } |
| |
| mpi3mr_process_factsdata(mrioc, &facts_data); |
| if (!re_init) { |
| retval = mpi3mr_check_reset_dma_mask(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Resetting dma mask failed %d\n", |
| retval); |
| goto out_failed; |
| } |
| } |
| |
| mpi3mr_print_ioc_info(mrioc); |
| |
| retval = mpi3mr_alloc_reply_sense_bufs(mrioc); |
| if (retval) { |
| ioc_err(mrioc, |
| "%s :Failed to allocated reply sense buffers %d\n", |
| __func__, retval); |
| goto out_failed; |
| } |
| |
| if (!re_init) { |
| retval = mpi3mr_alloc_chain_bufs(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to allocated chain buffers %d\n", |
| retval); |
| goto out_failed; |
| } |
| } |
| |
| retval = mpi3mr_issue_iocinit(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to Issue IOC Init %d\n", |
| retval); |
| goto out_failed; |
| } |
| mrioc->reply_free_queue_host_index = mrioc->num_reply_bufs; |
| writel(mrioc->reply_free_queue_host_index, |
| &mrioc->sysif_regs->reply_free_host_index); |
| |
| mrioc->sbq_host_index = mrioc->num_sense_bufs; |
| writel(mrioc->sbq_host_index, |
| &mrioc->sysif_regs->sense_buffer_free_host_index); |
| |
| if (!re_init) { |
| retval = mpi3mr_setup_isr(mrioc, 0); |
| if (retval) { |
| ioc_err(mrioc, "Failed to re-setup ISR, error %d\n", |
| retval); |
| goto out_failed; |
| } |
| } |
| |
| retval = mpi3mr_create_op_queues(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to create OpQueues error %d\n", |
| retval); |
| goto out_failed; |
| } |
| |
| if (re_init && |
| (mrioc->shost->nr_hw_queues > mrioc->num_op_reply_q)) { |
| retval = -1; |
| ioc_err(mrioc, |
| "Cannot create minimum number of OpQueues expected:%d created:%d\n", |
| mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q); |
| goto out_failed; |
| } |
| |
| for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| mrioc->event_masks[i] = -1; |
| |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_BROADCAST_PRIMITIVE); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_ENUMERATION); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_CABLE_MGMT); |
| mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENERGY_PACK_CHANGE); |
| |
| retval = mpi3mr_issue_event_notification(mrioc); |
| if (retval) { |
| ioc_err(mrioc, "Failed to issue event notification %d\n", |
| retval); |
| goto out_failed; |
| } |
| |
| if (re_init) { |
| ioc_info(mrioc, "Issuing Port Enable\n"); |
| retval = mpi3mr_issue_port_enable(mrioc, 0); |
| if (retval) { |
| ioc_err(mrioc, "Failed to issue port enable %d\n", |
| retval); |
| goto out_failed; |
| } |
| } |
| return retval; |
| |
| out_failed: |
| mpi3mr_cleanup_ioc(mrioc, re_init); |
| out_nocleanup: |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_memset_op_reply_q_buffers - memset the operational reply queue's |
| * segments |
| * @mrioc: Adapter instance reference |
| * @qidx: Operational reply queue index |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_memset_op_reply_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; |
| struct segments *segments; |
| int i, size; |
| |
| if (!op_reply_q->q_segments) |
| return; |
| |
| size = op_reply_q->segment_qd * mrioc->op_reply_desc_sz; |
| segments = op_reply_q->q_segments; |
| for (i = 0; i < op_reply_q->num_segments; i++) |
| memset(segments[i].segment, 0, size); |
| } |
| |
| /** |
| * mpi3mr_memset_op_req_q_buffers - memset the operational request queue's |
| * segments |
| * @mrioc: Adapter instance reference |
| * @qidx: Operational request queue index |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_memset_op_req_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) |
| { |
| struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; |
| struct segments *segments; |
| int i, size; |
| |
| if (!op_req_q->q_segments) |
| return; |
| |
| size = op_req_q->segment_qd * mrioc->facts.op_req_sz; |
| segments = op_req_q->q_segments; |
| for (i = 0; i < op_req_q->num_segments; i++) |
| memset(segments[i].segment, 0, size); |
| } |
| |
| /** |
| * mpi3mr_memset_buffers - memset memory for a controller |
| * @mrioc: Adapter instance reference |
| * |
| * clear all the memory allocated for a controller, typically |
| * called post reset to reuse the memory allocated during the |
| * controller init. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc) |
| { |
| u16 i; |
| |
| memset(mrioc->admin_req_base, 0, mrioc->admin_req_q_sz); |
| memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz); |
| |
| memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply)); |
| memset(mrioc->host_tm_cmds.reply, 0, |
| sizeof(*mrioc->host_tm_cmds.reply)); |
| for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) |
| memset(mrioc->dev_rmhs_cmds[i].reply, 0, |
| sizeof(*mrioc->dev_rmhs_cmds[i].reply)); |
| memset(mrioc->removepend_bitmap, 0, mrioc->dev_handle_bitmap_sz); |
| memset(mrioc->devrem_bitmap, 0, mrioc->devrem_bitmap_sz); |
| |
| for (i = 0; i < mrioc->num_queues; i++) { |
| mrioc->op_reply_qinfo[i].qid = 0; |
| mrioc->op_reply_qinfo[i].ci = 0; |
| mrioc->op_reply_qinfo[i].num_replies = 0; |
| mrioc->op_reply_qinfo[i].ephase = 0; |
| atomic_set(&mrioc->op_reply_qinfo[i].pend_ios, 0); |
| atomic_set(&mrioc->op_reply_qinfo[i].in_use, 0); |
| mpi3mr_memset_op_reply_q_buffers(mrioc, i); |
| |
| mrioc->req_qinfo[i].ci = 0; |
| mrioc->req_qinfo[i].pi = 0; |
| mrioc->req_qinfo[i].num_requests = 0; |
| mrioc->req_qinfo[i].qid = 0; |
| mrioc->req_qinfo[i].reply_qid = 0; |
| spin_lock_init(&mrioc->req_qinfo[i].q_lock); |
| mpi3mr_memset_op_req_q_buffers(mrioc, i); |
| } |
| } |
| |
| /** |
| * mpi3mr_free_mem - Free memory allocated for a controller |
| * @mrioc: Adapter instance reference |
| * |
| * Free all the memory allocated for a controller. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) |
| { |
| u16 i; |
| struct mpi3mr_intr_info *intr_info; |
| |
| if (mrioc->sense_buf_pool) { |
| if (mrioc->sense_buf) |
| dma_pool_free(mrioc->sense_buf_pool, mrioc->sense_buf, |
| mrioc->sense_buf_dma); |
| dma_pool_destroy(mrioc->sense_buf_pool); |
| mrioc->sense_buf = NULL; |
| mrioc->sense_buf_pool = NULL; |
| } |
| if (mrioc->sense_buf_q_pool) { |
| if (mrioc->sense_buf_q) |
| dma_pool_free(mrioc->sense_buf_q_pool, |
| mrioc->sense_buf_q, mrioc->sense_buf_q_dma); |
| dma_pool_destroy(mrioc->sense_buf_q_pool); |
| mrioc->sense_buf_q = NULL; |
| mrioc->sense_buf_q_pool = NULL; |
| } |
| |
| if (mrioc->reply_buf_pool) { |
| if (mrioc->reply_buf) |
| dma_pool_free(mrioc->reply_buf_pool, mrioc->reply_buf, |
| mrioc->reply_buf_dma); |
| dma_pool_destroy(mrioc->reply_buf_pool); |
| mrioc->reply_buf = NULL; |
| mrioc->reply_buf_pool = NULL; |
| } |
| if (mrioc->reply_free_q_pool) { |
| if (mrioc->reply_free_q) |
| dma_pool_free(mrioc->reply_free_q_pool, |
| mrioc->reply_free_q, mrioc->reply_free_q_dma); |
| dma_pool_destroy(mrioc->reply_free_q_pool); |
| mrioc->reply_free_q = NULL; |
| mrioc->reply_free_q_pool = NULL; |
| } |
| |
| for (i = 0; i < mrioc->num_op_req_q; i++) |
| mpi3mr_free_op_req_q_segments(mrioc, i); |
| |
| for (i = 0; i < mrioc->num_op_reply_q; i++) |
| mpi3mr_free_op_reply_q_segments(mrioc, i); |
| |
| for (i = 0; i < mrioc->intr_info_count; i++) { |
| intr_info = mrioc->intr_info + i; |
| intr_info->op_reply_q = NULL; |
| } |
| |
| kfree(mrioc->req_qinfo); |
| mrioc->req_qinfo = NULL; |
| mrioc->num_op_req_q = 0; |
| |
| kfree(mrioc->op_reply_qinfo); |
| mrioc->op_reply_qinfo = NULL; |
| mrioc->num_op_reply_q = 0; |
| |
| kfree(mrioc->init_cmds.reply); |
| mrioc->init_cmds.reply = NULL; |
| |
| kfree(mrioc->host_tm_cmds.reply); |
| mrioc->host_tm_cmds.reply = NULL; |
| |
| kfree(mrioc->removepend_bitmap); |
| mrioc->removepend_bitmap = NULL; |
| |
| kfree(mrioc->devrem_bitmap); |
| mrioc->devrem_bitmap = NULL; |
| |
| kfree(mrioc->chain_bitmap); |
| mrioc->chain_bitmap = NULL; |
| |
| for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { |
| kfree(mrioc->dev_rmhs_cmds[i].reply); |
| mrioc->dev_rmhs_cmds[i].reply = NULL; |
| } |
| |
| if (mrioc->chain_buf_pool) { |
| for (i = 0; i < mrioc->chain_buf_count; i++) { |
| if (mrioc->chain_sgl_list[i].addr) { |
| dma_pool_free(mrioc->chain_buf_pool, |
| mrioc->chain_sgl_list[i].addr, |
| mrioc->chain_sgl_list[i].dma_addr); |
| mrioc->chain_sgl_list[i].addr = NULL; |
| } |
| } |
| dma_pool_destroy(mrioc->chain_buf_pool); |
| mrioc->chain_buf_pool = NULL; |
| } |
| |
| kfree(mrioc->chain_sgl_list); |
| mrioc->chain_sgl_list = NULL; |
| |
| if (mrioc->admin_reply_base) { |
| dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, |
| mrioc->admin_reply_base, mrioc->admin_reply_dma); |
| mrioc->admin_reply_base = NULL; |
| } |
| if (mrioc->admin_req_base) { |
| dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, |
| mrioc->admin_req_base, mrioc->admin_req_dma); |
| mrioc->admin_req_base = NULL; |
| } |
| } |
| |
| /** |
| * mpi3mr_issue_ioc_shutdown - shutdown controller |
| * @mrioc: Adapter instance reference |
| * |
| * Send shutodwn notification to the controller and wait for the |
| * shutdown_timeout for it to be completed. |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc) |
| { |
| u32 ioc_config, ioc_status; |
| u8 retval = 1; |
| u32 timeout = MPI3MR_DEFAULT_SHUTDOWN_TIME * 10; |
| |
| ioc_info(mrioc, "Issuing shutdown Notification\n"); |
| if (mrioc->unrecoverable) { |
| ioc_warn(mrioc, |
| "IOC is unrecoverable shutdown is not issued\n"); |
| return; |
| } |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) |
| == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) { |
| ioc_info(mrioc, "shutdown already in progress\n"); |
| return; |
| } |
| |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| ioc_config |= MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL; |
| ioc_config |= MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN; |
| |
| writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); |
| |
| if (mrioc->facts.shutdown_timeout) |
| timeout = mrioc->facts.shutdown_timeout * 10; |
| |
| do { |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) |
| == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE) { |
| retval = 0; |
| break; |
| } |
| msleep(100); |
| } while (--timeout); |
| |
| ioc_status = readl(&mrioc->sysif_regs->ioc_status); |
| ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); |
| |
| if (retval) { |
| if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) |
| == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) |
| ioc_warn(mrioc, |
| "shutdown still in progress after timeout\n"); |
| } |
| |
| ioc_info(mrioc, |
| "Base IOC Sts/Config after %s shutdown is (0x%x)/(0x%x)\n", |
| (!retval) ? "successful" : "failed", ioc_status, |
| ioc_config); |
| } |
| |
| /** |
| * mpi3mr_cleanup_ioc - Cleanup controller |
| * @mrioc: Adapter instance reference |
| * @re_init: Cleanup due to a reinit or not |
| * |
| * controller cleanup handler, Message unit reset or soft reset |
| * and shutdown notification is issued to the controller and the |
| * associated memory resources are freed. |
| * |
| * Return: Nothing. |
| */ |
| void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc, u8 re_init) |
| { |
| enum mpi3mr_iocstate ioc_state; |
| |
| if (!re_init) |
| mpi3mr_stop_watchdog(mrioc); |
| |
| mpi3mr_ioc_disable_intr(mrioc); |
| |
| ioc_state = mpi3mr_get_iocstate(mrioc); |
| |
| if ((!mrioc->unrecoverable) && (!mrioc->reset_in_progress) && |
| (ioc_state == MRIOC_STATE_READY)) { |
| if (mpi3mr_issue_and_process_mur(mrioc, |
| MPI3MR_RESET_FROM_CTLR_CLEANUP)) |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, |
| MPI3MR_RESET_FROM_MUR_FAILURE); |
| |
| if (!re_init) |
| mpi3mr_issue_ioc_shutdown(mrioc); |
| } |
| |
| if (!re_init) { |
| mpi3mr_free_mem(mrioc); |
| mpi3mr_cleanup_resources(mrioc); |
| } |
| } |
| |
| /** |
| * mpi3mr_drv_cmd_comp_reset - Flush a internal driver command |
| * @mrioc: Adapter instance reference |
| * @cmdptr: Internal command tracker |
| * |
| * Complete an internal driver commands with state indicating it |
| * is completed due to reset. |
| * |
| * Return: Nothing. |
| */ |
| static inline void mpi3mr_drv_cmd_comp_reset(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_drv_cmd *cmdptr) |
| { |
| if (cmdptr->state & MPI3MR_CMD_PENDING) { |
| cmdptr->state |= MPI3MR_CMD_RESET; |
| cmdptr->state &= ~MPI3MR_CMD_PENDING; |
| if (cmdptr->is_waiting) { |
| complete(&cmdptr->done); |
| cmdptr->is_waiting = 0; |
| } else if (cmdptr->callback) |
| cmdptr->callback(mrioc, cmdptr); |
| } |
| } |
| |
| /** |
| * mpi3mr_flush_drv_cmds - Flush internaldriver commands |
| * @mrioc: Adapter instance reference |
| * |
| * Flush all internal driver commands post reset |
| * |
| * Return: Nothing. |
| */ |
| static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc) |
| { |
| struct mpi3mr_drv_cmd *cmdptr; |
| u8 i; |
| |
| cmdptr = &mrioc->init_cmds; |
| mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); |
| cmdptr = &mrioc->host_tm_cmds; |
| mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); |
| |
| for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { |
| cmdptr = &mrioc->dev_rmhs_cmds[i]; |
| mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); |
| } |
| } |
| |
| /** |
| * mpi3mr_diagfault_reset_handler - Diag fault reset handler |
| * @mrioc: Adapter instance reference |
| * @reset_reason: Reset reason code |
| * |
| * This is an handler for issuing diag fault reset from the |
| * applications through IOCTL path to stop the execution of the |
| * controller |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc, |
| u32 reset_reason) |
| { |
| int retval = 0; |
| |
| ioc_info(mrioc, "Entry: reason code: %s\n", |
| mpi3mr_reset_rc_name(reset_reason)); |
| mrioc->reset_in_progress = 1; |
| |
| mpi3mr_ioc_disable_intr(mrioc); |
| |
| retval = mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); |
| |
| if (retval) { |
| ioc_err(mrioc, "The diag fault reset failed: reason %d\n", |
| reset_reason); |
| mpi3mr_ioc_enable_intr(mrioc); |
| } |
| ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED")); |
| mrioc->reset_in_progress = 0; |
| return retval; |
| } |
| |
| /** |
| * mpi3mr_soft_reset_handler - Reset the controller |
| * @mrioc: Adapter instance reference |
| * @reset_reason: Reset reason code |
| * @snapdump: Flag to generate snapdump in firmware or not |
| * |
| * This is an handler for recovering controller by issuing soft |
| * reset are diag fault reset. This is a blocking function and |
| * when one reset is executed if any other resets they will be |
| * blocked. All IOCTLs/IO will be blocked during the reset. If |
| * controller reset is successful then the controller will be |
| * reinitalized, otherwise the controller will be marked as not |
| * recoverable |
| * |
| * In snapdump bit is set, the controller is issued with diag |
| * fault reset so that the firmware can create a snap dump and |
| * post that the firmware will result in F000 fault and the |
| * driver will issue soft reset to recover from that. |
| * |
| * Return: 0 on success, non-zero on failure. |
| */ |
| int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, |
| u32 reset_reason, u8 snapdump) |
| { |
| int retval = 0, i; |
| unsigned long flags; |
| u32 host_diagnostic, timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; |
| |
| if (mrioc->fault_dbg) { |
| if (snapdump) |
| mpi3mr_set_diagsave(mrioc); |
| mpi3mr_kill_ioc(mrioc, reset_reason); |
| } |
| |
| /* |
| * Block new resets until the currently executing one is finished and |
| * return the status of the existing reset for all blocked resets |
| */ |
| if (!mutex_trylock(&mrioc->reset_mutex)) { |
| ioc_info(mrioc, "Another reset in progress\n"); |
| return -1; |
| } |
| mrioc->reset_in_progress = 1; |
| |
| if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) && |
| (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) { |
| for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| mrioc->event_masks[i] = -1; |
| |
| retval = mpi3mr_issue_event_notification(mrioc); |
| |
| if (retval) { |
| ioc_err(mrioc, |
| "Failed to turn off events prior to reset %d\n", |
| retval); |
| } |
| } |
| |
| mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT); |
| |
| mpi3mr_ioc_disable_intr(mrioc); |
| |
| if (snapdump) { |
| mpi3mr_set_diagsave(mrioc); |
| retval = mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); |
| if (!retval) { |
| do { |
| host_diagnostic = |
| readl(&mrioc->sysif_regs->host_diagnostic); |
| if (!(host_diagnostic & |
| MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) |
| break; |
| msleep(100); |
| } while (--timeout); |
| } |
| } |
| |
| retval = mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, reset_reason); |
| if (retval) { |
| ioc_err(mrioc, "Failed to issue soft reset to the ioc\n"); |
| goto out; |
| } |
| |
| mpi3mr_flush_delayed_rmhs_list(mrioc); |
| mpi3mr_flush_drv_cmds(mrioc); |
| memset(mrioc->devrem_bitmap, 0, mrioc->devrem_bitmap_sz); |
| memset(mrioc->removepend_bitmap, 0, mrioc->dev_handle_bitmap_sz); |
| mpi3mr_cleanup_fwevt_list(mrioc); |
| mpi3mr_flush_host_io(mrioc); |
| mpi3mr_invalidate_devhandles(mrioc); |
| mpi3mr_memset_buffers(mrioc); |
| retval = mpi3mr_init_ioc(mrioc, 1); |
| if (retval) { |
| pr_err(IOCNAME "reinit after soft reset failed: reason %d\n", |
| mrioc->name, reset_reason); |
| goto out; |
| } |
| ssleep(10); |
| |
| out: |
| if (!retval) { |
| mrioc->reset_in_progress = 0; |
| scsi_unblock_requests(mrioc->shost); |
| mpi3mr_rfresh_tgtdevs(mrioc); |
| mrioc->ts_update_counter = 0; |
| spin_lock_irqsave(&mrioc->watchdog_lock, flags); |
| if (mrioc->watchdog_work_q) |
| queue_delayed_work(mrioc->watchdog_work_q, |
| &mrioc->watchdog_work, |
| msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); |
| spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); |
| } else { |
| mpi3mr_issue_reset(mrioc, |
| MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); |
| mrioc->unrecoverable = 1; |
| mrioc->reset_in_progress = 0; |
| retval = -1; |
| } |
| |
| mutex_unlock(&mrioc->reset_mutex); |
| ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED")); |
| return retval; |
| } |