| if ARCH_AT91 |
| |
| config HAVE_AT91_DATAFLASH_CARD |
| bool |
| |
| config HAVE_NAND_ATMEL_BUSWIDTH_16 |
| bool |
| |
| config HAVE_AT91_USART3 |
| bool |
| |
| config HAVE_AT91_USART4 |
| bool |
| |
| config HAVE_AT91_USART5 |
| bool |
| |
| menu "Atmel AT91 System-on-Chip" |
| |
| choice |
| prompt "Atmel AT91 Processor" |
| |
| config ARCH_AT91RM9200 |
| bool "AT91RM9200" |
| select CPU_ARM920T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_AT91_USART3 |
| |
| config ARCH_AT91SAM9260 |
| bool "AT91SAM9260 or AT91SAM9XE" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_AT91_USART3 |
| select HAVE_AT91_USART4 |
| select HAVE_AT91_USART5 |
| select HAVE_NET_MACB |
| |
| config ARCH_AT91SAM9261 |
| bool "AT91SAM9261" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_FB_ATMEL |
| |
| config ARCH_AT91SAM9G10 |
| bool "AT91SAM9G10" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_FB_ATMEL |
| |
| config ARCH_AT91SAM9263 |
| bool "AT91SAM9263" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_FB_ATMEL |
| select HAVE_NET_MACB |
| |
| config ARCH_AT91SAM9RL |
| bool "AT91SAM9RL" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_AT91_USART3 |
| select HAVE_FB_ATMEL |
| |
| config ARCH_AT91SAM9G20 |
| bool "AT91SAM9G20" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_AT91_USART3 |
| select HAVE_AT91_USART4 |
| select HAVE_AT91_USART5 |
| select HAVE_NET_MACB |
| |
| config ARCH_AT91SAM9G45 |
| bool "AT91SAM9G45" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_AT91_USART3 |
| select HAVE_FB_ATMEL |
| select HAVE_NET_MACB |
| |
| config ARCH_AT91CAP9 |
| bool "AT91CAP9" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| select HAVE_FB_ATMEL |
| |
| config ARCH_AT572D940HF |
| bool "AT572D940HF" |
| select CPU_ARM926T |
| select GENERIC_CLOCKEVENTS |
| |
| config ARCH_AT91X40 |
| bool "AT91x40" |
| select ARCH_USES_GETTIMEOFFSET |
| |
| endchoice |
| |
| config AT91_PMC_UNIT |
| bool |
| default !ARCH_AT91X40 |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91RM9200 |
| |
| comment "AT91RM9200 Board Type" |
| |
| config MACH_ONEARM |
| bool "Ajeco 1ARM Single Board Computer" |
| help |
| Select this if you are using Ajeco's 1ARM Single Board Computer. |
| <http://www.ajeco.fi/> |
| |
| config ARCH_AT91RM9200DK |
| bool "Atmel AT91RM9200-DK Development board" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91RM9200-DK Development board. |
| (Discontinued) |
| |
| config MACH_AT91RM9200EK |
| bool "Atmel AT91RM9200-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> |
| |
| config MACH_CSB337 |
| bool "Cogent CSB337" |
| help |
| Select this if you are using Cogent's CSB337 board. |
| <http://www.cogcomp.com/csb_csb337.htm> |
| |
| config MACH_CSB637 |
| bool "Cogent CSB637" |
| help |
| Select this if you are using Cogent's CSB637 board. |
| <http://www.cogcomp.com/csb_csb637.htm> |
| |
| config MACH_CARMEVA |
| bool "Conitec ARM&EVA" |
| help |
| Select this if you are using Conitec's AT91RM9200-MCU-Module. |
| <http://www.conitec.net/english/linuxboard.php> |
| |
| config MACH_ATEB9200 |
| bool "Embest ATEB9200" |
| help |
| Select this if you are using Embest's ATEB9200 board. |
| <http://www.embedinfo.com/english/product/ATEB9200.asp> |
| |
| config MACH_KB9200 |
| bool "KwikByte KB920x" |
| help |
| Select this if you are using KwikByte's KB920x board. |
| <http://www.kwikbyte.com/KB9202.html> |
| |
| config MACH_PICOTUX2XX |
| bool "picotux 200" |
| help |
| Select this if you are using a picotux 200. |
| <http://www.picotux.com/> |
| |
| config MACH_KAFA |
| bool "Sperry-Sun KAFA board" |
| help |
| Select this if you are using Sperry-Sun's KAFA board. |
| |
| config MACH_ECBAT91 |
| bool "emQbit ECB_AT91 SBC" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using emQbit's ECB_AT91 board. |
| <http://wiki.emqbit.com/free-ecb-at91> |
| |
| config MACH_YL9200 |
| bool "ucDragon YL-9200" |
| help |
| Select this if you are using the ucDragon YL-9200 board. |
| |
| config MACH_CPUAT91 |
| bool "Eukrea CPUAT91" |
| help |
| Select this if you are using the Eukrea Electromatique's |
| CPUAT91 board <http://www.eukrea.com/>. |
| |
| config MACH_ECO920 |
| bool "eco920" |
| help |
| Select this if you are using the eco920 board |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9260 |
| |
| comment "AT91SAM9260 Variants" |
| |
| config ARCH_AT91SAM9260_SAM9XE |
| bool "AT91SAM9XE" |
| help |
| Select this if you are using Atmel's AT91SAM9XE System-on-Chip. |
| They are basically AT91SAM9260s with various sizes of embedded Flash. |
| |
| comment "AT91SAM9260 / AT91SAM9XE Board Type" |
| |
| config MACH_AT91SAM9260EK |
| bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> |
| |
| config MACH_CAM60 |
| bool "KwikByte KB9260 (CAM60) board" |
| help |
| Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. |
| <http://www.kwikbyte.com/KB9260.html> |
| |
| config MACH_SAM9_L9260 |
| bool "Olimex SAM9-L9260 board" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. |
| <http://www.olimex.com/dev/sam9-L9260.html> |
| |
| config MACH_AFEB9260 |
| bool "Custom afeb9260 board v1" |
| help |
| Select this if you are using custom afeb9260 board based on |
| open hardware design. Select this for revision 1 of the board. |
| <svn://194.85.238.22/home/users/george/svn/arm9eb> |
| <http://groups.google.com/group/arm9fpga-evolution-board> |
| |
| config MACH_USB_A9260 |
| bool "CALAO USB-A9260" |
| help |
| Select this if you are using a Calao Systems USB-A9260. |
| <http://www.calao-systems.com> |
| |
| config MACH_QIL_A9260 |
| bool "CALAO QIL-A9260 board" |
| help |
| Select this if you are using a Calao Systems QIL-A9260 Board. |
| <http://www.calao-systems.com> |
| |
| config MACH_CPU9260 |
| bool "Eukrea CPU9260 board" |
| help |
| Select this if you are using a Eukrea Electromatique's |
| CPU9260 Board <http://www.eukrea.com/> |
| |
| config MACH_FLEXIBITY |
| bool "Flexibity Connect board" |
| help |
| Select this if you are using Flexibity Connect board |
| <http://www.flexibity.com> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9261 |
| |
| comment "AT91SAM9261 Board Type" |
| |
| config MACH_AT91SAM9261EK |
| bool "Atmel AT91SAM9261-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G10 |
| |
| comment "AT91SAM9G10 Board Type" |
| |
| config MACH_AT91SAM9G10EK |
| bool "Atmel AT91SAM9G10-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9263 |
| |
| comment "AT91SAM9263 Board Type" |
| |
| config MACH_AT91SAM9263EK |
| bool "Atmel AT91SAM9263-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> |
| |
| config MACH_USB_A9263 |
| bool "CALAO USB-A9263" |
| help |
| Select this if you are using a Calao Systems USB-A9263. |
| <http://www.calao-systems.com> |
| |
| config MACH_NEOCORE926 |
| bool "Adeneo NEOCORE926" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using the Adeneo Neocore 926 board. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9RL |
| |
| comment "AT91SAM9RL Board Type" |
| |
| config MACH_AT91SAM9RLEK |
| bool "Atmel AT91SAM9RL-EK Evaluation Kit" |
| help |
| Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G20 |
| |
| comment "AT91SAM9G20 Board Type" |
| |
| config MACH_AT91SAM9G20EK |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit |
| that embeds only one SD/MMC slot. |
| |
| config MACH_AT91SAM9G20EK_2MMC |
| depends on MACH_AT91SAM9G20EK |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit |
| with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and |
| onwards. |
| |
| config MACH_CPU9G20 |
| bool "Eukrea CPU9G20 board" |
| help |
| Select this if you are using a Eukrea Electromatique's |
| CPU9G20 Board <http://www.eukrea.com/> |
| |
| config MACH_PORTUXG20 |
| bool "taskit PortuxG20" |
| help |
| Select this if you are using taskit's PortuxG20. |
| <http://www.taskit.de/en/> |
| |
| config MACH_STAMP9G20 |
| bool "taskit Stamp9G20 CPU module" |
| help |
| Select this if you are using taskit's Stamp9G20 CPU module on its |
| evaluation board. |
| <http://www.taskit.de/en/> |
| |
| endif |
| |
| if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) |
| comment "AT91SAM9260/AT91SAM9G20 boards" |
| |
| config MACH_SNAPPER_9260 |
| bool "Bluewater Systems Snapper 9260/9G20 module" |
| help |
| Select this if you are using the Bluewater Systems Snapper 9260 or |
| Snapper 9G20 modules. |
| <http://www.bluewatersys.com/> |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G45 |
| |
| comment "AT91SAM9G45 Board Type" |
| |
| config MACH_AT91SAM9M10G45EK |
| bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. |
| "ES" at the end of the name means that this board is an |
| Engineering Sample. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91CAP9 |
| |
| comment "AT91CAP9 Board Type" |
| |
| config MACH_AT91CAP9ADK |
| bool "Atmel AT91CAP9A-DK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT572D940HF |
| |
| comment "AT572D940HF Board Type" |
| |
| config MACH_AT572D940HFEB |
| bool "AT572D940HF-EK" |
| depends on ARCH_AT572D940HF |
| select HAVE_AT91_DATAFLASH_CARD |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT572D940HF-EK evaluation kit. |
| <http://www.atmel.com/products/diopsis/default.asp> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91X40 |
| |
| comment "AT91X40 Board Type" |
| |
| config MACH_AT91EB01 |
| bool "Atmel AT91EB01 Evaluation Kit" |
| help |
| Select this if you are using Atmel's AT91EB01 Evaluation Kit. |
| It is also a popular target for simulators such as GDB's |
| ARM simulator (commonly known as the ARMulator) and the |
| Skyeye simulator. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Board Options" |
| |
| config MTD_AT91_DATAFLASH_CARD |
| bool "Enable DataFlash Card support" |
| depends on HAVE_AT91_DATAFLASH_CARD |
| help |
| Enable support for the DataFlash card. |
| |
| config MTD_NAND_ATMEL_BUSWIDTH_16 |
| bool "Enable 16-bit data bus interface to NAND flash" |
| depends on HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| On AT91SAM926x boards both types of NAND flash can be present |
| (8 and 16 bit data bus width). |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Feature Selections" |
| |
| config AT91_PROGRAMMABLE_CLOCKS |
| bool "Programmable Clocks" |
| help |
| Select this if you need to program one or more of the PCK0..PCK3 |
| programmable clock outputs. |
| |
| config AT91_SLOW_CLOCK |
| bool "Suspend-to-RAM disables main oscillator" |
| depends on SUSPEND |
| help |
| Select this if you want Suspend-to-RAM to save the most power |
| possible (without powering off the CPU) by disabling the PLLs |
| and main oscillator so that only the 32 KiHz clock is available. |
| |
| When only that slow-clock is available, some peripherals lose |
| functionality. Many can't issue wakeup events unless faster |
| clocks are available. Some lose their operating state and |
| need to be completely re-initialized. |
| |
| config AT91_TIMER_HZ |
| int "Kernel HZ (jiffies per second)" |
| range 32 1024 |
| depends on ARCH_AT91 |
| default "128" if ARCH_AT91RM9200 |
| default "100" |
| help |
| On AT91rm9200 chips where you're using a system clock derived |
| from the 32768 Hz hardware clock, this tick rate should divide |
| it exactly: use a power-of-two value, such as 128 or 256, to |
| reduce timing errors caused by rounding. |
| |
| On AT91sam926x chips, or otherwise when using a higher precision |
| system clock (of at least several MHz), rounding is less of a |
| problem so it can be safer to use a decimal values like 100. |
| |
| choice |
| prompt "Select a UART for early kernel messages" |
| |
| config AT91_EARLY_DBGU |
| bool "DBGU" |
| |
| config AT91_EARLY_USART0 |
| bool "USART0" |
| |
| config AT91_EARLY_USART1 |
| bool "USART1" |
| |
| config AT91_EARLY_USART2 |
| bool "USART2" |
| depends on ! ARCH_AT91X40 |
| |
| config AT91_EARLY_USART3 |
| bool "USART3" |
| depends on HAVE_AT91_USART3 |
| |
| config AT91_EARLY_USART4 |
| bool "USART4" |
| depends on HAVE_AT91_USART4 |
| |
| config AT91_EARLY_USART5 |
| bool "USART5" |
| depends on HAVE_AT91_USART5 |
| |
| endchoice |
| |
| endmenu |
| |
| endif |