| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * S/390 common I/O routines -- blacklisting of specific devices |
| * |
| * Copyright IBM Corp. 1999, 2013 |
| * Author(s): Ingo Adlung (adlung@de.ibm.com) |
| * Cornelia Huck (cornelia.huck@de.ibm.com) |
| * Arnd Bergmann (arndb@de.ibm.com) |
| */ |
| |
| #define KMSG_COMPONENT "cio" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/ctype.h> |
| #include <linux/device.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/cio.h> |
| #include <asm/ipl.h> |
| |
| #include "blacklist.h" |
| #include "cio.h" |
| #include "cio_debug.h" |
| #include "css.h" |
| #include "device.h" |
| |
| /* |
| * "Blacklisting" of certain devices: |
| * Device numbers given in the commandline as cio_ignore=... won't be known |
| * to Linux. |
| * |
| * These can be single devices or ranges of devices |
| */ |
| |
| /* 65536 bits for each set to indicate if a devno is blacklisted or not */ |
| #define __BL_DEV_WORDS ((__MAX_SUBCHANNEL + (8*sizeof(long) - 1)) / \ |
| (8*sizeof(long))) |
| static unsigned long bl_dev[__MAX_SSID + 1][__BL_DEV_WORDS]; |
| typedef enum {add, free} range_action; |
| |
| /* |
| * Function: blacklist_range |
| * (Un-)blacklist the devices from-to |
| */ |
| static int blacklist_range(range_action action, unsigned int from_ssid, |
| unsigned int to_ssid, unsigned int from, |
| unsigned int to, int msgtrigger) |
| { |
| if ((from_ssid > to_ssid) || ((from_ssid == to_ssid) && (from > to))) { |
| if (msgtrigger) |
| pr_warn("0.%x.%04x to 0.%x.%04x is not a valid range for cio_ignore\n", |
| from_ssid, from, to_ssid, to); |
| |
| return 1; |
| } |
| |
| while ((from_ssid < to_ssid) || ((from_ssid == to_ssid) && |
| (from <= to))) { |
| if (action == add) |
| set_bit(from, bl_dev[from_ssid]); |
| else |
| clear_bit(from, bl_dev[from_ssid]); |
| from++; |
| if (from > __MAX_SUBCHANNEL) { |
| from_ssid++; |
| from = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pure_hex(char **cp, unsigned int *val, int min_digit, |
| int max_digit, int max_val) |
| { |
| int diff; |
| |
| diff = 0; |
| *val = 0; |
| |
| while (diff <= max_digit) { |
| int value = hex_to_bin(**cp); |
| |
| if (value < 0) |
| break; |
| *val = *val * 16 + value; |
| (*cp)++; |
| diff++; |
| } |
| |
| if ((diff < min_digit) || (diff > max_digit) || (*val > max_val)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid, |
| unsigned int *devno, int msgtrigger) |
| { |
| char *str_work; |
| int val, rc, ret; |
| |
| rc = 1; |
| |
| if (*str == '\0') |
| goto out; |
| |
| /* old style */ |
| str_work = str; |
| val = simple_strtoul(str, &str_work, 16); |
| |
| if (*str_work == '\0') { |
| if (val <= __MAX_SUBCHANNEL) { |
| *devno = val; |
| *ssid = 0; |
| *cssid = 0; |
| rc = 0; |
| } |
| goto out; |
| } |
| |
| /* new style */ |
| str_work = str; |
| ret = pure_hex(&str_work, cssid, 1, 2, __MAX_CSSID); |
| if (ret || (str_work[0] != '.')) |
| goto out; |
| str_work++; |
| ret = pure_hex(&str_work, ssid, 1, 1, __MAX_SSID); |
| if (ret || (str_work[0] != '.')) |
| goto out; |
| str_work++; |
| ret = pure_hex(&str_work, devno, 4, 4, __MAX_SUBCHANNEL); |
| if (ret || (str_work[0] != '\0')) |
| goto out; |
| |
| rc = 0; |
| out: |
| if (rc && msgtrigger) |
| pr_warn("%s is not a valid device for the cio_ignore kernel parameter\n", |
| str); |
| |
| return rc; |
| } |
| |
| static int blacklist_parse_parameters(char *str, range_action action, |
| int msgtrigger) |
| { |
| unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to; |
| int rc, totalrc; |
| char *parm; |
| range_action ra; |
| |
| totalrc = 0; |
| |
| while ((parm = strsep(&str, ","))) { |
| rc = 0; |
| ra = action; |
| if (*parm == '!') { |
| if (ra == add) |
| ra = free; |
| else |
| ra = add; |
| parm++; |
| } |
| if (strcmp(parm, "all") == 0) { |
| from_cssid = 0; |
| from_ssid = 0; |
| from = 0; |
| to_cssid = __MAX_CSSID; |
| to_ssid = __MAX_SSID; |
| to = __MAX_SUBCHANNEL; |
| } else if (strcmp(parm, "ipldev") == 0) { |
| if (ipl_info.type == IPL_TYPE_CCW) { |
| from_cssid = 0; |
| from_ssid = ipl_info.data.ccw.dev_id.ssid; |
| from = ipl_info.data.ccw.dev_id.devno; |
| } else if (ipl_info.type == IPL_TYPE_FCP || |
| ipl_info.type == IPL_TYPE_FCP_DUMP) { |
| from_cssid = 0; |
| from_ssid = ipl_info.data.fcp.dev_id.ssid; |
| from = ipl_info.data.fcp.dev_id.devno; |
| } else { |
| continue; |
| } |
| to_cssid = from_cssid; |
| to_ssid = from_ssid; |
| to = from; |
| } else if (strcmp(parm, "condev") == 0) { |
| if (console_devno == -1) |
| continue; |
| |
| from_cssid = to_cssid = 0; |
| from_ssid = to_ssid = 0; |
| from = to = console_devno; |
| } else { |
| rc = parse_busid(strsep(&parm, "-"), &from_cssid, |
| &from_ssid, &from, msgtrigger); |
| if (!rc) { |
| if (parm != NULL) |
| rc = parse_busid(parm, &to_cssid, |
| &to_ssid, &to, |
| msgtrigger); |
| else { |
| to_cssid = from_cssid; |
| to_ssid = from_ssid; |
| to = from; |
| } |
| } |
| } |
| if (!rc) { |
| rc = blacklist_range(ra, from_ssid, to_ssid, from, to, |
| msgtrigger); |
| if (rc) |
| totalrc = -EINVAL; |
| } else |
| totalrc = -EINVAL; |
| } |
| |
| return totalrc; |
| } |
| |
| static int __init |
| blacklist_setup (char *str) |
| { |
| CIO_MSG_EVENT(6, "Reading blacklist parameters\n"); |
| if (blacklist_parse_parameters(str, add, 1)) |
| return 0; |
| return 1; |
| } |
| |
| __setup ("cio_ignore=", blacklist_setup); |
| |
| /* Checking if devices are blacklisted */ |
| |
| /* |
| * Function: is_blacklisted |
| * Returns 1 if the given devicenumber can be found in the blacklist, |
| * otherwise 0. |
| * Used by validate_subchannel() |
| */ |
| int |
| is_blacklisted (int ssid, int devno) |
| { |
| return test_bit (devno, bl_dev[ssid]); |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| /* |
| * Function: blacklist_parse_proc_parameters |
| * parse the stuff which is piped to /proc/cio_ignore |
| */ |
| static int blacklist_parse_proc_parameters(char *buf) |
| { |
| int rc; |
| char *parm; |
| |
| parm = strsep(&buf, " "); |
| |
| if (strcmp("free", parm) == 0) { |
| rc = blacklist_parse_parameters(buf, free, 0); |
| /* There could be subchannels without proper devices connected. |
| * evaluate all the entries |
| */ |
| css_schedule_eval_all(); |
| } else if (strcmp("add", parm) == 0) |
| rc = blacklist_parse_parameters(buf, add, 0); |
| else if (strcmp("purge", parm) == 0) |
| return ccw_purge_blacklisted(); |
| else |
| return -EINVAL; |
| |
| |
| return rc; |
| } |
| |
| /* Iterator struct for all devices. */ |
| struct ccwdev_iter { |
| int devno; |
| int ssid; |
| int in_range; |
| }; |
| |
| static void * |
| cio_ignore_proc_seq_start(struct seq_file *s, loff_t *offset) |
| { |
| struct ccwdev_iter *iter = s->private; |
| |
| if (*offset >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1)) |
| return NULL; |
| memset(iter, 0, sizeof(*iter)); |
| iter->ssid = *offset / (__MAX_SUBCHANNEL + 1); |
| iter->devno = *offset % (__MAX_SUBCHANNEL + 1); |
| return iter; |
| } |
| |
| static void |
| cio_ignore_proc_seq_stop(struct seq_file *s, void *it) |
| { |
| } |
| |
| static void * |
| cio_ignore_proc_seq_next(struct seq_file *s, void *it, loff_t *offset) |
| { |
| struct ccwdev_iter *iter; |
| loff_t p = *offset; |
| |
| (*offset)++; |
| if (p >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1)) |
| return NULL; |
| iter = it; |
| if (iter->devno == __MAX_SUBCHANNEL) { |
| iter->devno = 0; |
| iter->ssid++; |
| if (iter->ssid > __MAX_SSID) |
| return NULL; |
| } else |
| iter->devno++; |
| return iter; |
| } |
| |
| static int |
| cio_ignore_proc_seq_show(struct seq_file *s, void *it) |
| { |
| struct ccwdev_iter *iter; |
| |
| iter = it; |
| if (!is_blacklisted(iter->ssid, iter->devno)) |
| /* Not blacklisted, nothing to output. */ |
| return 0; |
| if (!iter->in_range) { |
| /* First device in range. */ |
| if ((iter->devno == __MAX_SUBCHANNEL) || |
| !is_blacklisted(iter->ssid, iter->devno + 1)) { |
| /* Singular device. */ |
| seq_printf(s, "0.%x.%04x\n", iter->ssid, iter->devno); |
| return 0; |
| } |
| iter->in_range = 1; |
| seq_printf(s, "0.%x.%04x-", iter->ssid, iter->devno); |
| return 0; |
| } |
| if ((iter->devno == __MAX_SUBCHANNEL) || |
| !is_blacklisted(iter->ssid, iter->devno + 1)) { |
| /* Last device in range. */ |
| iter->in_range = 0; |
| seq_printf(s, "0.%x.%04x\n", iter->ssid, iter->devno); |
| } |
| return 0; |
| } |
| |
| static ssize_t |
| cio_ignore_write(struct file *file, const char __user *user_buf, |
| size_t user_len, loff_t *offset) |
| { |
| char *buf; |
| ssize_t rc, ret, i; |
| |
| if (*offset) |
| return -EINVAL; |
| if (user_len > 65536) |
| user_len = 65536; |
| buf = vzalloc(user_len + 1); /* maybe better use the stack? */ |
| if (buf == NULL) |
| return -ENOMEM; |
| |
| if (strncpy_from_user (buf, user_buf, user_len) < 0) { |
| rc = -EFAULT; |
| goto out_free; |
| } |
| |
| i = user_len - 1; |
| while ((i >= 0) && (isspace(buf[i]) || (buf[i] == 0))) { |
| buf[i] = '\0'; |
| i--; |
| } |
| ret = blacklist_parse_proc_parameters(buf); |
| if (ret) |
| rc = ret; |
| else |
| rc = user_len; |
| |
| out_free: |
| vfree (buf); |
| return rc; |
| } |
| |
| static const struct seq_operations cio_ignore_proc_seq_ops = { |
| .start = cio_ignore_proc_seq_start, |
| .stop = cio_ignore_proc_seq_stop, |
| .next = cio_ignore_proc_seq_next, |
| .show = cio_ignore_proc_seq_show, |
| }; |
| |
| static int |
| cio_ignore_proc_open(struct inode *inode, struct file *file) |
| { |
| return seq_open_private(file, &cio_ignore_proc_seq_ops, |
| sizeof(struct ccwdev_iter)); |
| } |
| |
| static const struct proc_ops cio_ignore_proc_ops = { |
| .proc_open = cio_ignore_proc_open, |
| .proc_read = seq_read, |
| .proc_lseek = seq_lseek, |
| .proc_release = seq_release_private, |
| .proc_write = cio_ignore_write, |
| }; |
| |
| static int |
| cio_ignore_proc_init (void) |
| { |
| struct proc_dir_entry *entry; |
| |
| entry = proc_create("cio_ignore", S_IFREG | S_IRUGO | S_IWUSR, NULL, |
| &cio_ignore_proc_ops); |
| if (!entry) |
| return -ENOENT; |
| return 0; |
| } |
| |
| __initcall (cio_ignore_proc_init); |
| |
| #endif /* CONFIG_PROC_FS */ |