| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2015 Red Hat |
| * Copyright (C) 2015 Sony Mobile Communications Inc. |
| * Author: Werner Johansson <werner.johansson@sonymobile.com> |
| * |
| * Based on AUO panel driver by Rob Clark <robdclark@gmail.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_panel.h> |
| |
| /* |
| * When power is turned off to this panel a minimum off time of 500ms has to be |
| * observed before powering back on as there's no external reset pin. Keep |
| * track of earliest wakeup time and delay subsequent prepare call accordingly |
| */ |
| #define MIN_POFF_MS (500) |
| |
| struct wuxga_nt_panel { |
| struct drm_panel base; |
| struct mipi_dsi_device *dsi; |
| |
| struct regulator *supply; |
| |
| bool prepared; |
| bool enabled; |
| |
| ktime_t earliest_wake; |
| |
| const struct drm_display_mode *mode; |
| }; |
| |
| static inline struct wuxga_nt_panel *to_wuxga_nt_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct wuxga_nt_panel, base); |
| } |
| |
| static int wuxga_nt_panel_on(struct wuxga_nt_panel *wuxga_nt) |
| { |
| return mipi_dsi_turn_on_peripheral(wuxga_nt->dsi); |
| } |
| |
| static int wuxga_nt_panel_disable(struct drm_panel *panel) |
| { |
| struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); |
| int mipi_ret, bl_ret = 0; |
| |
| if (!wuxga_nt->enabled) |
| return 0; |
| |
| mipi_ret = mipi_dsi_shutdown_peripheral(wuxga_nt->dsi); |
| |
| wuxga_nt->enabled = false; |
| |
| return mipi_ret ? mipi_ret : bl_ret; |
| } |
| |
| static int wuxga_nt_panel_unprepare(struct drm_panel *panel) |
| { |
| struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); |
| |
| if (!wuxga_nt->prepared) |
| return 0; |
| |
| regulator_disable(wuxga_nt->supply); |
| wuxga_nt->earliest_wake = ktime_add_ms(ktime_get_real(), MIN_POFF_MS); |
| wuxga_nt->prepared = false; |
| |
| return 0; |
| } |
| |
| static int wuxga_nt_panel_prepare(struct drm_panel *panel) |
| { |
| struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); |
| int ret; |
| s64 enablewait; |
| |
| if (wuxga_nt->prepared) |
| return 0; |
| |
| /* |
| * If the user re-enabled the panel before the required off-time then |
| * we need to wait the remaining period before re-enabling regulator |
| */ |
| enablewait = ktime_ms_delta(wuxga_nt->earliest_wake, ktime_get_real()); |
| |
| /* Sanity check, this should never happen */ |
| if (enablewait > MIN_POFF_MS) |
| enablewait = MIN_POFF_MS; |
| |
| if (enablewait > 0) |
| msleep(enablewait); |
| |
| ret = regulator_enable(wuxga_nt->supply); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * A minimum delay of 250ms is required after power-up until commands |
| * can be sent |
| */ |
| msleep(250); |
| |
| ret = wuxga_nt_panel_on(wuxga_nt); |
| if (ret < 0) { |
| dev_err(panel->dev, "failed to set panel on: %d\n", ret); |
| goto poweroff; |
| } |
| |
| wuxga_nt->prepared = true; |
| |
| return 0; |
| |
| poweroff: |
| regulator_disable(wuxga_nt->supply); |
| |
| return ret; |
| } |
| |
| static int wuxga_nt_panel_enable(struct drm_panel *panel) |
| { |
| struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); |
| |
| if (wuxga_nt->enabled) |
| return 0; |
| |
| wuxga_nt->enabled = true; |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode default_mode = { |
| .clock = 164402, |
| .hdisplay = 1920, |
| .hsync_start = 1920 + 152, |
| .hsync_end = 1920 + 152 + 52, |
| .htotal = 1920 + 152 + 52 + 20, |
| .vdisplay = 1200, |
| .vsync_start = 1200 + 24, |
| .vsync_end = 1200 + 24 + 6, |
| .vtotal = 1200 + 24 + 6 + 48, |
| }; |
| |
| static int wuxga_nt_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &default_mode); |
| if (!mode) { |
| dev_err(panel->dev, "failed to add mode %ux%u@%u\n", |
| default_mode.hdisplay, default_mode.vdisplay, |
| drm_mode_vrefresh(&default_mode)); |
| return -ENOMEM; |
| } |
| |
| drm_mode_set_name(mode); |
| |
| drm_mode_probed_add(connector, mode); |
| |
| connector->display_info.width_mm = 217; |
| connector->display_info.height_mm = 136; |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs wuxga_nt_panel_funcs = { |
| .disable = wuxga_nt_panel_disable, |
| .unprepare = wuxga_nt_panel_unprepare, |
| .prepare = wuxga_nt_panel_prepare, |
| .enable = wuxga_nt_panel_enable, |
| .get_modes = wuxga_nt_panel_get_modes, |
| }; |
| |
| static const struct of_device_id wuxga_nt_of_match[] = { |
| { .compatible = "panasonic,vvx10f034n00", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, wuxga_nt_of_match); |
| |
| static int wuxga_nt_panel_add(struct wuxga_nt_panel *wuxga_nt) |
| { |
| struct device *dev = &wuxga_nt->dsi->dev; |
| int ret; |
| |
| wuxga_nt->mode = &default_mode; |
| |
| wuxga_nt->supply = devm_regulator_get(dev, "power"); |
| if (IS_ERR(wuxga_nt->supply)) |
| return PTR_ERR(wuxga_nt->supply); |
| |
| drm_panel_init(&wuxga_nt->base, &wuxga_nt->dsi->dev, |
| &wuxga_nt_panel_funcs, DRM_MODE_CONNECTOR_DSI); |
| |
| ret = drm_panel_of_backlight(&wuxga_nt->base); |
| if (ret) |
| return ret; |
| |
| return drm_panel_add(&wuxga_nt->base); |
| } |
| |
| static void wuxga_nt_panel_del(struct wuxga_nt_panel *wuxga_nt) |
| { |
| if (wuxga_nt->base.dev) |
| drm_panel_remove(&wuxga_nt->base); |
| } |
| |
| static int wuxga_nt_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct wuxga_nt_panel *wuxga_nt; |
| int ret; |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_MODE_VIDEO_HSE | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS | |
| MIPI_DSI_MODE_LPM; |
| |
| wuxga_nt = devm_kzalloc(&dsi->dev, sizeof(*wuxga_nt), GFP_KERNEL); |
| if (!wuxga_nt) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, wuxga_nt); |
| |
| wuxga_nt->dsi = dsi; |
| |
| ret = wuxga_nt_panel_add(wuxga_nt); |
| if (ret < 0) |
| return ret; |
| |
| return mipi_dsi_attach(dsi); |
| } |
| |
| static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = drm_panel_disable(&wuxga_nt->base); |
| if (ret < 0) |
| dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); |
| |
| wuxga_nt_panel_del(wuxga_nt); |
| |
| return 0; |
| } |
| |
| static void wuxga_nt_panel_shutdown(struct mipi_dsi_device *dsi) |
| { |
| struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); |
| |
| drm_panel_disable(&wuxga_nt->base); |
| } |
| |
| static struct mipi_dsi_driver wuxga_nt_panel_driver = { |
| .driver = { |
| .name = "panel-panasonic-vvx10f034n00", |
| .of_match_table = wuxga_nt_of_match, |
| }, |
| .probe = wuxga_nt_panel_probe, |
| .remove = wuxga_nt_panel_remove, |
| .shutdown = wuxga_nt_panel_shutdown, |
| }; |
| module_mipi_dsi_driver(wuxga_nt_panel_driver); |
| |
| MODULE_AUTHOR("Werner Johansson <werner.johansson@sonymobile.com>"); |
| MODULE_DESCRIPTION("Panasonic VVX10F034N00 Novatek NT1397-based WUXGA (1920x1200) video mode panel driver"); |
| MODULE_LICENSE("GPL v2"); |